Dirk Eibach <eibach@gdsys.de>
+ dlvision PPC405EP
gdppc440etx PPC440EP/GR
neo PPC405EP
PCI405 PPC405GP
PLU405 PPC405EP
PMC405 PPC405GP
+ PMC405DE PPC405EP
PMC440 PPC440EPx
VOH405 PPC405EP
VOM405 PPC405EP
KAREF PPC440GX
METROBOX PPC440GX
- XPEDITE1K PPC440GX
Georg Schardt <schardt@team-ctech.de>
Peter Tyser <ptyser@xes-inc.com>
+ XPEDITE1000 PPC440GX
XPEDITE5170 MPC8640
XPEDITE5200 MPC8548
XPEDITE5370 MPC8572
csb272 \
csb472 \
DASA_SIM \
+ dlvision \
DP405 \
DU405 \
DU440 \
PIP405 \
PLU405 \
PMC405 \
+ PMC405DE \
PMC440 \
PPChameleonEVB \
quad100hd \
WUH405 \
xilinx-ppc440-generic \
xilinx-ppc440-generic_flash \
- XPEDITE1K \
+ XPEDITE1000 \
yellowstone \
yosemite \
yucca \
DASA_SIM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
+dlvision_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
+
DP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
PMC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
+PMC405DE_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
+
PMC440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
>> $(obj)board/xilinx/ppc440-generic/config.tmp
@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
-XPEDITE1K_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
+XPEDITE1000_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
yosemite_config \
yellowstone_config: unconfig
LIB = $(obj)lib$(BOARD).a
-COBJS := $(BOARD).o
-COBJS += bootstrap.o
+COBJS-y := $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
SOBJS := init.o
+COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
+++ /dev/null
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <asm/io.h>
-
-/*
- * NOR and NAND boot options change bytes 5, 6, 8, 9, 11. The
- * values are independent of the rest of the clock settings.
- */
-
-#define NAND_COMPATIBLE 0x01
-#define NOR_COMPATIBLE 0x02
-
-#define I2C_EEPROM_ADDR 0x52
-
-static char *config_labels[] = {
- "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
- "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
- "CPU:1000 PLB: 200 OPB: 100 EBC: 100",
- "CPU:1066 PLB: 266 OPB: 88 EBC: 88",
- NULL
-};
-
-static u8 boot_configs[][17] = {
- {
- (NAND_COMPATIBLE | NOR_COMPATIBLE),
- 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, 0x40, 0x08,
- 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
- },
- {
- (NAND_COMPATIBLE | NOR_COMPATIBLE),
- 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, 0x40, 0x08,
- 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
- },
- {
- (NAND_COMPATIBLE | NOR_COMPATIBLE),
- 0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0, 0x40, 0x08,
- 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
- },
- {
- (NAND_COMPATIBLE | NOR_COMPATIBLE),
- 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0, 0x40, 0x08,
- 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
- },
- {
- 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
- }
-};
-
-/*
- * Bytes 5,6,8,9,11 change for NAND boot
- */
-#if 0
-/*
- * Values for 512 page size NAND chips, not used anymore, just
- * keep them here for reference
- */
-static u8 nand_boot[] = {
- 0x90, 0x01, 0xa0, 0x68, 0x58
-};
-#else
-/*
- * Values for 2k page size NAND chips
- */
-static u8 nand_boot[] = {
- 0x90, 0x01, 0xa0, 0xe8, 0x58
-};
-#endif
-
-static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- u8 *buf, b_nand;
- int x, y, nbytes, selcfg;
- extern char console_buffer[];
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return 1;
- }
-
- if ((strcmp(argv[1], "nor") != 0) &&
- (strcmp(argv[1], "nand") != 0)) {
- printf("Unsupported boot-device - only nor|nand support\n");
- return 1;
- }
-
- /* set the nand flag based on provided input */
- if ((strcmp(argv[1], "nand") == 0))
- b_nand = 1;
- else
- b_nand = 0;
-
- printf("Available configurations: \n\n");
-
- if (b_nand) {
- for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
- /* filter on nand compatible */
- if (boot_configs[x][0] & NAND_COMPATIBLE) {
- printf(" %d - %s\n", (y+1), config_labels[x]);
- y++;
- }
- }
- } else {
- for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
- /* filter on nor compatible */
- if (boot_configs[x][0] & NOR_COMPATIBLE) {
- printf(" %d - %s\n", (y+1), config_labels[x]);
- y++;
- }
- }
- }
-
- do {
- nbytes = readline(" Selection [1-x / quit]: ");
-
- if (nbytes) {
- if (strcmp(console_buffer, "quit") == 0)
- return 0;
- selcfg = simple_strtol(console_buffer, NULL, 10);
- if ((selcfg < 1) || (selcfg > y))
- nbytes = 0;
- }
- } while (nbytes == 0);
-
-
- y = (selcfg - 1);
-
- for (x = 0; boot_configs[x][0] != 0; x++) {
- if (b_nand) {
- if (boot_configs[x][0] & NAND_COMPATIBLE) {
- if (y > 0)
- y--;
- else if (y < 1)
- break;
- }
- } else {
- if (boot_configs[x][0] & NOR_COMPATIBLE) {
- if (y > 0)
- y--;
- else if (y < 1)
- break;
- }
- }
- }
-
- buf = &boot_configs[x][1];
-
- if (b_nand) {
- buf[5] = nand_boot[0];
- buf[6] = nand_boot[1];
- buf[8] = nand_boot[2];
- buf[9] = nand_boot[3];
- buf[11] = nand_boot[4];
- }
-
- if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
- printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-
- printf("Done\n");
- printf("Please power-cycle the board for the changes to take effect\n");
-
- return 0;
-}
-
-U_BOOT_CMD(
- bootstrap, 2, 0, do_bootstrap,
- "program the I2C bootstrap EEPROM",
- "<nand|nor> - strap to boot from NAND or NOR flash"
-);
--- /dev/null
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+ {
+ "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "800-nor", "NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1000-nor", "NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1066-nor", "NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88",
+ {
+ 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "1066-nand", "NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88",
+ {
+ 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0,
+ 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o cmd_pll.o
+COBJS-y := $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+ {
+ "333-nor","NOR CPU: 333 PLB: 166 OPB: 83 EBC: 83",
+ {
+ 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "400-133-nor", "NOR CPU: 400 PLB: 133 OPB: 66 EBC: 66",
+ {
+ 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "400-nor", "NOR CPU: 400 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "533-nor", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88",
+ {
+ 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ {
+ 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "666-nor", "NOR CPU: 666 PLB: 222 OPB: 111 EBC: 111",
+ {
+ 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+ 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+ }
+ },
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
+++ /dev/null
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * ehnus: change pll frequency.
- * Wed Sep 5 11:45:17 CST 2007
- * hsun@udtech.com.cn
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <i2c.h>
-
-#ifdef CONFIG_CMD_EEPROM
-
-#define EEPROM_CONF_OFFSET 0
-#define EEPROM_TEST_OFFSET 16
-#define EEPROM_SDSTP_PARAM 16
-
-#define PLL_NAME_MAX 12
-#define BUF_STEP 8
-
-/* eeprom_wirtes 8Byte per op. */
-#define EEPROM_ALTER_FREQ(freq) \
- do { \
- int __i; \
- for (__i = 0; __i < 2; __i++) \
- eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, \
- EEPROM_CONF_OFFSET + __i*BUF_STEP, \
- pll_select[freq], \
- BUF_STEP + __i*BUF_STEP); \
- } while (0)
-
-#define PDEBUG
-#ifdef PDEBUG
-#define PLL_DEBUG pll_debug(EEPROM_CONF_OFFSET)
-#else
-#define PLL_DEBUG
-#endif
-
-typedef enum {
- PLL_ebc20,
- PLL_333,
- PLL_4001,
- PLL_4002,
- PLL_533,
- PLL_600,
- PLL_666, /* For now, kilauea can't support */
- RCONF,
- WTEST,
- PLL_TOTAL
-} pll_freq_t;
-
-static const char
-pll_name[][PLL_NAME_MAX] = {
- "PLL_ebc20",
- "PLL_333",
- "PLL_400@1",
- "PLL_400@2",
- "PLL_533",
- "PLL_600",
- "PLL_666",
- "RCONF",
- "WTEST",
- ""
-};
-
-/*
- * ehnus:
- */
-static uchar
-pll_select[][EEPROM_SDSTP_PARAM] = {
- /* 0: CPU 333MHz EBC 20MHz, for test only */
- {
- 0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
- 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
- },
-
- /* 0: 333 */
- {
- 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
- 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
- },
-
- /* 1: 400_266 */
- {
- 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
- 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
- },
-
- /* 2: 400 */
- {
- 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
- 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
- },
-
- /* 3: 533 */
- {
- 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
- 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
- },
-
- /* 4: 600 */
- {
- 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
- 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
- },
-
- /* 5: 666 */
- {
- 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
- 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
- },
-
- {}
-};
-
-static uchar
-testbuf[EEPROM_SDSTP_PARAM] = {
- 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
- 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
-};
-
-static void
-pll_debug(int off)
-{
- int i;
- uchar buffer[EEPROM_SDSTP_PARAM];
-
- memset(buffer, 0, sizeof(buffer));
- eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
- buffer, EEPROM_SDSTP_PARAM);
-
- printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
- for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
- printf("%02x ", buffer[i]);
- printf("\n");
-}
-
-static void
-test_write(void)
-{
- printf("Debug: test eeprom_write ... ");
-
- /*
- * Write twice, 8 bytes per write
- */
- eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
- testbuf, 8);
- eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
- testbuf, 16);
- printf("done\n");
-
- pll_debug(EEPROM_TEST_OFFSET);
-}
-
-int
-do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- char c = '\0';
- pll_freq_t pll_freq;
- if (argc < 2) {
- cmd_usage(cmdtp);
- goto ret;
- }
-
- for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
- if (!strcmp(pll_name[pll_freq], argv[1]))
- break;
-
- switch (pll_freq) {
- case PLL_ebc20:
- case PLL_333:
- case PLL_4001:
- case PLL_4002:
- case PLL_533:
- case PLL_600:
- EEPROM_ALTER_FREQ(pll_freq);
- break;
-
- case PLL_666: /* not support */
- printf("Choose this option will result in a boot failure."
- "\nContinue? (Y/N): ");
-
- c = getc(); putc('\n');
-
- if ((c == 'y') || (c == 'Y')) {
- EEPROM_ALTER_FREQ(pll_freq);
- break;
- }
- goto ret;
-
- case RCONF:
- pll_debug(EEPROM_CONF_OFFSET);
- goto ret;
- case WTEST:
- printf("DEBUG: write test\n");
- test_write();
- goto ret;
-
- default:
- printf("Invalid options\n\n");
- cmd_usage(cmdtp);
- goto ret;
- }
-
- printf("PLL set to %s, "
- "reset the board to take effect\n", pll_name[pll_freq]);
-
- PLL_DEBUG;
-ret:
- return 0;
-}
-
-U_BOOT_CMD(
- pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
- "change pll frequence",
- "pllalter <selection> - change pll frequence \n\n\
- ** New freq take effect after reset. ** \n\
- ----------------------------------------------\n\
- PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
- \t Same as PLL_333 \n\
- \t except \n\
- \t EBC: 20 MHz \n\
- ----------------------------------------------\n\
- PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
- \t VCO: 666 MHz \n\
- \t CPU: 333 MHz \n\
- \t PLB: 166 MHz \n\
- \t OPB: 83 MHz \n\
- \t DDR: 83 MHz \n\
- ------------------------------------------------\n\
- PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
- \t VCO: 800 MHz \n\
- \t CPU: 400 MHz \n\
- \t PLB: 133 MHz \n\
- \t OPB: 66 MHz \n\
- \t DDR: 133 MHz \n\
- ------------------------------------------------\n\
- PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
- \t VCO: 800 MHz \n\
- \t CPU: 400 MHz \n\
- \t PLB: 200 MHz \n\
- \t OPB: 100 MHz \n\
- \t DDR: 200 MHz \n\
- ----------------------------------------------\n\
- PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
- \t VCO: 1066 MHz \n\
- \t CPU: 533 MHz \n\
- \t PLB: 177 MHz \n\
- \t OPB: 88 MHz \n\
- \t DDR: 177 MHz \n\
- ----------------------------------------------\n\
- PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
- \t VCO: 1200 MHz \n\
- \t CPU: 600 MHz \n\
- \t PLB: 200 MHz \n\
- \t OPB: 100 MHz \n\
- \t DDR: 200 MHz \n\
- ----------------------------------------------\n\
- PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
- \t VCO: 1333 MHz \n\
- \t CPU: 666 MHz \n\
- \t PLB: 166 MHz \n\
- \t OPB: 83 MHz \n\
- \t DDR: 166 MHz \n\
- -----------------------------------------------\n\
- RCONF: Read current eeprom configuration. \n\
- -----------------------------------------------\n\
- WTEST: Test EEPROM write with predefined values\n\
- -----------------------------------------------"
-);
-
-#endif /* CONFIG_CMD_EEPROM */
#include <command.h>
#include <malloc.h>
-
-#if 0
-#define FPGA_DEBUG
-#endif
+#undef FPGA_DEBUG
DECLARE_GLOBAL_DATA_PTR;
*/
#include "../common/fpga.c"
-
/*
* include common auto-update code (for esd boards)
*/
/* Prototypes */
int gunzip(void *, int, unsigned char *, unsigned long *);
-int board_early_init_f (void)
+int board_early_init_f(void)
{
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* EBC Configuration Register: set ready timeout to
* 512 ebc-clks -> ca. 15 us
*/
- mtebc (epcr, 0xa8400000); /* ebc always driven */
+ mtebc(epcr, 0xa8400000); /* ebc always driven */
return 0;
}
-int misc_init_r (void)
+int misc_init_r(void)
{
- unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
- unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
unsigned char *dst;
unsigned char fctr;
ulong len = sizeof(fpgadata);
gd->bd->bi_flashoffset = 0;
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
- if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
- printf ("GUNZIP ERROR - must RESET board to recover\n");
- do_reset (NULL, 0, 0, NULL);
+ if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
+ (uchar *)fpgadata, &len) != 0) {
+ printf("GUNZIP ERROR - must RESET board to recover\n");
+ do_reset(NULL, 0, 0, NULL);
}
status = fpga_boot(dst, len);
for (index=0;index<1000;index++)
udelay(1000);
}
- putc ('\n');
+ putc('\n');
do_reset(NULL, 0, 0, NULL);
}
printf("%s ", &(dst[index+1]));
index += len+3;
}
- putc ('\n');
+ putc('\n');
free(dst);
/*
* Reset external DUARTs
*/
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
udelay(10);
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
udelay(1000);
/*
* Set NAND-FLASH GPIO signals to default
*/
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
+ in_be32((void*)GPIO0_OR) &
+ ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
/*
* Setup EEPROM write protection
*/
- out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
- out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
+ out_be32((void*)GPIO0_OR,
+ in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+ out_be32((void*)GPIO0_TCR,
+ in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
/*
* Enable interrupts in exar duart mcr[3]
*/
- out_8(duart0_mcr, 0x08);
- out_8(duart1_mcr, 0x08);
+ out_8((void *)DUART0_BA + 4, 0x08);
+ out_8((void *)DUART1_BA + 4, 0x08);
/*
* Enable auto RS485 mode in 2nd external uart
out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */
out_8((void *)DUART1_BA + 3, 0); /* write LCR */
- return (0);
+ return 0;
}
/*
* Check Board Identity:
*/
-int checkboard (void)
+int checkboard(void)
{
char str[64];
- int i = getenv_r ("serial#", str, sizeof(str));
+ int i = getenv_r("serial#", str, sizeof(str));
- puts ("Board: ");
+ puts("Board: ");
- if (i == -1) {
- puts ("### No HW ID - assuming PLU405");
- } else {
+ if (i == -1)
+ puts("### No HW ID - assuming PLU405");
+ else
puts(str);
- }
- putc ('\n');
+ putc('\n');
return 0;
}
*/
if (on) { /* assert RESET */
out_be16((void *)FPGA_CTRL,
- in_be16((void *)FPGA_CTRL) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
+ in_be16((void *)FPGA_CTRL) &
+ ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
} else { /* release RESET */
out_be16((void *)FPGA_CTRL,
- in_be16((void *)FPGA_CTRL) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
+ in_be16((void *)FPGA_CTRL) |
+ CONFIG_SYS_FPGA_CTRL_CF_RESET);
}
}
#endif /* CONFIG_IDE_RESET */
#if defined(CONFIG_SYS_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
- * <state> -1: deliver current state
- * 0: disable write
- * 1: enable write
- * Returns: -1: wrong device address
- * 0: dis-/en- able done
- * 0/1: current state if <state> was -1.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
*/
-int eeprom_write_enable (unsigned dev_addr, int state)
+int eeprom_write_enable(unsigned dev_addr, int state)
{
if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
return -1;
case 1:
/* Enable write access, clear bit GPIO0. */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
+ in_be32((void*)GPIO0_OR) &
+ ~CONFIG_SYS_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO0. */
out_be32((void*)GPIO0_OR,
- in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+ in_be32((void*)GPIO0_OR) |
+ CONFIG_SYS_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
- state = (0 == (in_be32((void*)GPIO0_OR) &
- CONFIG_SYS_EEPROM_WP));
+ state = ((in_be32((void*)GPIO0_OR) &
+ CONFIG_SYS_EEPROM_WP) == 0);
break;
}
}
return state;
}
-int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int query = argc == 1;
int state = 0;
if (query) {
/* Query write access state. */
- state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
if (state < 0) {
- puts ("Query of write access state failed.\n");
+ puts("Query of write access state failed.\n");
} else {
- printf ("Write access for device 0x%0x is %sabled.\n",
- CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
+ printf("Write access for device 0x%0x is %sabled.\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR,
+ state ? "en" : "dis");
state = 0;
}
} else {
- if ('0' == argv[1][0]) {
+ if (argv[1][0] == '0') {
/* Disable write access. */
- state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
+ 0);
} else {
/* Enable write access. */
- state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
- }
- if (state < 0) {
- puts ("Setup of write access state failed.\n");
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
+ 1);
}
+ if (state < 0)
+ puts("Setup of write access state failed.\n");
}
return state;
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y = $(BOARD).o
+COBJS-y += ../common/cmd_loadpci.o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+ {
+ "133",
+ "CPU: 133 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
+ {
+ 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x40, 0x12, 0x12, 0x42, 0x3e, 0x00, 0x00
+ }
+ },
+ {
+ "266",
+ "CPU: 266 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
+ {
+ 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x50, 0x22, 0x2d, 0x42, 0x3e, 0x00, 0x00
+ }
+ },
+ {
+ "333",
+ "CPU: 333 PLB: 111 OPB: 55 EBC: 55 PCI: 55/111",
+ {
+ 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x60, 0x29, 0x2d, 0x42, 0xbe, 0x00, 0x00
+ }
+ },
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+TEXT_BASE = 0xFFFC0000
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/4xx_pci.h>
+#include <command.h>
+#include <malloc.h>
+
+/*
+ * PMC405-DE cpld registers
+ * - all registers are 8 bit
+ * - all registers are on 32 bit addesses
+ */
+struct pmc405de_cpld {
+ /* cpld design version */
+ u8 version;
+ u8 reserved0[3];
+
+ /* misc. status lines */
+ u8 status;
+ u8 reserved1[3];
+
+ /*
+ * gated control flags
+ * gate bit(s) must be written with '1' to
+ * access control flag
+ */
+ u8 control;
+ u8 reserved2[3];
+};
+
+#define CPLD_VERSION_MASK 0x0f
+#define CPLD_CONTROL_POSTLED_N 0x01
+#define CPLD_CONTROL_POSTLED_GATE 0x02
+#define CPLD_CONTROL_RESETOUT_N 0x40
+#define CPLD_CONTROL_RESETOUT_N_GATE 0x80
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void __ft_board_setup(void *blob, bd_t *bd);
+extern void pll_write(u32 a, u32 b);
+
+static int wait_for_pci_ready_done;
+
+static int is_monarch(void);
+static int pci_is_66mhz(void);
+static int board_revision(void);
+static int cpld_revision(void);
+static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div);
+
+int board_early_init_f(void)
+{
+ u32 pllmr0, pllmr1;
+
+ /*
+ * check M66EN and patch PLB:PCI divider for 66MHz PCI
+ *
+ * fCPU==333MHz && fPCI==66MHz (PLBDiv==3 && M66EN==1): PLB/PCI=1
+ * fCPU==333MHz && fPCI==33MHz (PLBDiv==3 && M66EN==0): PLB/PCI=2
+ * fCPU==133|266MHz && fPCI==66MHz (PLBDiv==1|2 && M66EN==1): PLB/PCI=2
+ * fCPU==133|266MHz && fPCI==33MHz (PLBDiv==1|2 && M66EN==0): PLB/PCI=3
+ *
+ * calling upd_plb_pci_div() may end in calling pll_write() which will
+ * do a chip reset and never return.
+ */
+ pllmr0 = mfdcr(CPC0_PLLMR0);
+ pllmr1 = mfdcr(CPC0_PLLMR1);
+
+ if ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) == PLLMR0_CPU_PLB_DIV_3) {
+ /* fCPU=333MHz, fPLB=111MHz */
+ if (pci_is_66mhz())
+ upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_1);
+ else
+ upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
+ } else {
+ /* fCPU=133|266MHz, fPLB=133MHz */
+ if (pci_is_66mhz())
+ upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
+ else
+ upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_3);
+ }
+
+ /*
+ * IRQ 25 (EXT IRQ 0) PCI-INTA#; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) PCI-INTB#; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) PCI-INTC#; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) PCI-INTD#; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) ETH0-PHY-IRQ#; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive
+ */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest prio */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /*
+ * EBC Configuration Register:
+ * - set ready timeout to 512 ebc-clks -> ca. 15 us
+ * - EBC lines are always driven
+ */
+ mtebc(epcr, 0xa8400000);
+
+ return 0;
+}
+
+static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div)
+{
+ if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) != div)
+ pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) | div, pllmr1);
+}
+
+int misc_init_r(void)
+{
+ int i;
+ struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+ struct pmc405de_cpld *cpld =
+ (struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+
+ if (!is_monarch()) {
+ /* PCI configuration done: release EREADY */
+ setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EREADY);
+ setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_EREADY);
+ }
+
+ /* turn off POST LED */
+ out_8(&cpld->control,
+ CPLD_CONTROL_POSTLED_N | CPLD_CONTROL_POSTLED_GATE);
+
+ /* turn on LEDs: RUN, A, B */
+ clrbits_be32(&gpio0->or,
+ CONFIG_SYS_GPIO_LEDRUN_N |
+ CONFIG_SYS_GPIO_LEDA_N |
+ CONFIG_SYS_GPIO_LEDB_N);
+
+ for (i=0; i < 200; i++)
+ udelay(1000);
+
+ /* turn off LEDs: A, B */
+ setbits_be32(&gpio0->or,
+ CONFIG_SYS_GPIO_LEDA_N |
+ CONFIG_SYS_GPIO_LEDB_N);
+
+ return (0);
+}
+
+static int is_monarch(void)
+{
+ struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+ return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_MONARCH_N) == 0;
+}
+
+static int pci_is_66mhz(void)
+{
+ struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+ return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_M66EN);
+}
+
+static int board_revision(void)
+{
+ struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+ return ((in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_HWREV_MASK) >>
+ CONFIG_SYS_GPIO_HWREV_SHIFT);
+}
+
+static int cpld_revision(void)
+{
+ struct pmc405de_cpld *cpld =
+ (struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+ return ((in_8(&cpld->version) & CPLD_VERSION_MASK));
+}
+
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+ puts("Board: esd GmbH - PMC-CPU/405-DE");
+
+ gd->board_type = board_revision();
+ printf(", Rev 1.%ld, ", gd->board_type);
+
+ if (!is_monarch())
+ puts("non-");
+
+ printf("monarch, PCI=%s MHz, PLD-Rev 1.%d\n",
+ pci_is_66mhz() ? "66" : "33", cpld_revision());
+
+ return 0;
+}
+
+
+static void wait_for_pci_ready(void)
+{
+ struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+ int i;
+ char *s = getenv("pcidelay");
+
+ /* only wait once */
+ if (wait_for_pci_ready_done)
+ return;
+
+ /*
+ * We have our own handling of the pcidelay variable.
+ * Using CONFIG_PCI_BOOTDELAY enables pausing for host
+ * and adapter devices. For adapter devices we do not
+ * want this.
+ */
+ if (s) {
+ int ms = simple_strtoul(s, NULL, 10);
+ printf("PCI: Waiting for %d ms\n", ms);
+ for (i=0; i<ms; i++)
+ udelay(1000);
+ }
+
+ if (!(in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY)) {
+ printf("PCI: Waiting for EREADY (CTRL-C to skip) ... ");
+ while (1) {
+ if (ctrlc()) {
+ puts("abort\n");
+ break;
+ }
+ if (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY) {
+ printf("done\n");
+ break;
+ }
+ }
+ }
+
+ wait_for_pci_ready_done = 1;
+}
+
+/*
+ * Overwrite weak is_pci_host()
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+ char *s;
+
+ if (!is_monarch()) {
+ /*
+ * Overwrite PCI identification when running in
+ * non-monarch mode
+ * This should be moved into pci_target_init()
+ * when it is sometimes available for 405 CPUs
+ */
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_SUBSYSTEM_ID,
+ CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_CLASS_SUB_CODE,
+ CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
+ }
+
+ s = getenv("pciscan");
+ if (s == NULL) {
+ if (is_monarch()) {
+ wait_for_pci_ready();
+ return 1;
+ } else {
+ return 0;
+ }
+ } else {
+ if (!strcmp(s, "yes"))
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Overwrite weak pci_pre_init()
+ *
+ * The default implementation enables the 405EP
+ * internal PCI arbiter. We do not want that
+ * on a PMC module.
+ */
+int pci_pre_init(struct pci_controller *hose)
+{
+ return 1;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ int rc;
+
+ __ft_board_setup(blob, bd);
+
+ /*
+ * Disable PCI in non-monarch mode.
+ */
+ if (!is_monarch()) {
+ rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
+ "disabled", sizeof("disabled"), 1);
+ if (rc) {
+ printf("Unable to update property status in PCI node, "
+ "err=%s\n",
+ fdt_strerror(rc));
+ }
+ }
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+/* Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+ struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+
+ if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
+ return -1;
+ } else {
+ switch (state) {
+ case 1:
+ /* Enable write access, clear bit GPIO0. */
+ clrbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access, set bit GPIO0. */
+ setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in_be32(&gpio0->or) &
+ CONFIG_SYS_GPIO_EEPROM_WP));
+ break;
+ }
+ }
+ return state;
+}
+
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int query = argc == 1;
+ int state = 0;
+
+ if (query) {
+ /* Query write access state. */
+ state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, - 1);
+ if (state < 0) {
+ puts("Query of write access state failed.\n");
+ } else {
+ printf("Write access for device 0x%0x is %sabled.\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR,
+ state ? "en" : "dis");
+ state = 0;
+ }
+ } else {
+ if ('0' == argv[1][0]) {
+ /* Disable write access. */
+ state = eeprom_write_enable(
+ CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+ } else {
+ /* Enable write access. */
+ state = eeprom_write_enable(
+ CONFIG_SYS_I2C_EEPROM_ADDR, 1);
+ }
+ if (state < 0)
+ puts ("Setup of write access state failed.\n");
+ }
+
+ return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+ "Enable / disable / query EEPROM write access",
+ ""
+);
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
+
+#if defined(CONFIG_PRAM)
+#include <environment.h>
+extern env_t *env_ptr;
+
+int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u32 pram, nextbase, base;
+ char *v;
+ u32 param;
+ ulong *lptr;
+
+ v = getenv("pram");
+ if (v)
+ pram = simple_strtoul(v, NULL, 10);
+ else {
+ printf("Error: pram undefined. Please define pram in KiB\n");
+ return 1;
+ }
+
+ base = gd->bd->bi_memsize;
+#if defined(CONFIG_LOGBUFFER)
+ base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
+#endif
+ /*
+ * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MM_TOP_HIDE
+ */
+ param = base - (pram << 10);
+ printf("PARAM: @%08x\n", param);
+ debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base);
+
+ /* clear entire PA ram */
+ memset((void*)param, 0, (pram << 10));
+
+ /* reserve 4k for pointer field */
+ nextbase = base - 4096;
+ lptr = (ulong*)(base);
+
+ /*
+ * *(--lptr) = item_size;
+ * *(--lptr) = base - item_base = distance from field top;
+ */
+
+ /* env is first (4k aligned) */
+ nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
+ memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
+ *(--lptr) = CONFIG_ENV_SIZE; /* size */
+ *(--lptr) = base - nextbase; /* offset | type=0 */
+
+ /* free section */
+ *(--lptr) = nextbase - param; /* size */
+ *(--lptr) = (base - param) | 126; /* offset | type=126 */
+
+ /* terminate pointer field */
+ *(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
+ *(--lptr) = 0; /* offset=0 -> terminator */
+ return 0;
+}
+U_BOOT_CMD(
+ painit, 1, 1, do_painit,
+ "prepare PciAccess system",
+ ""
+);
+#endif /* CONFIG_PRAM */
+
+int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+ setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_SELFRST_N);
+ return 0;
+}
+U_BOOT_CMD(
+ selfreset, 1, 1, do_selfreset,
+ "assert self-reset# signal",
+ ""
+);
+
+int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ struct pmc405de_cpld *cpld =
+ (struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+
+ if (argc > 1) {
+ if (argv[1][0] == '0') {
+ /* assert */
+ printf("PMC-RESETOUT# asserted\n");
+ out_8(&cpld->control,
+ CPLD_CONTROL_RESETOUT_N_GATE);
+ } else {
+ /* deassert */
+ printf("PMC-RESETOUT# deasserted\n");
+ out_8(&cpld->control,
+ CPLD_CONTROL_RESETOUT_N |
+ CPLD_CONTROL_RESETOUT_N_GATE);
+ }
+ } else {
+ printf("PMC-RESETOUT# is %s\n",
+ (in_8(&cpld->control) & CPLD_CONTROL_RESETOUT_N) ?
+ "inactive" : "active");
+ }
+ return 0;
+}
+U_BOOT_CMD(
+ resetout, 2, 1, do_resetout,
+ "assert PMC-RESETOUT# signal",
+ ""
+);
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
reg |= CPR0_ICFG_RLI_MASK;
mtcpr(clk_icfg, reg);
- mtspr(dbcr0, 0x20000000); /* do chip reset */
+ mtspr(SPRN_DBCR0, 0x20000000); /* do chip reset */
}
/*
--- /dev/null
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o
+SOBJS =
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+enum {
+ HWTYPE_DLVISION_CPU = 0,
+ HWTYPE_DLVISION_CON = 1,
+};
+
+#define HWREV_100 6
+
+int board_early_init_f(void)
+{
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /*
+ * EBC Configuration Register: set ready timeout to 512 ebc-clks
+ * -> ca. 15 us
+ */
+ mtebc(epcr, 0xa8400000); /* ebc always driven */
+
+ /*
+ * setup io-latches
+ */
+ out_le16((void *)CONFIG_SYS_LATCH_BASE, 0x00f0);
+ out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0x0002);
+ out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x200), 0x0000);
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ /*
+ * set "startup-finished"-gpios
+ */
+ gpio_write_bit(21, 0);
+ gpio_write_bit(22, 1);
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+ u8 channel2_msr = in_8((void *)CONFIG_UART_BASE + 0x26);
+ u8 channel3_msr = in_8((void *)CONFIG_UART_BASE + 0x36);
+ u8 channel7_msr = in_8((void *)CONFIG_UART_BASE + 0x76);
+ u8 unit_type;
+ u8 local_con;
+ u8 audio;
+ u8 hardware_version;
+
+ printf("Board: ");
+
+ unit_type = (channel2_msr & 0x80) ? 0x01 : 0x00;
+ local_con = (channel2_msr & 0x20) ? 0x01 : 0x00;
+ audio = (channel3_msr & 0x20) ? 0x01 : 0x00;
+ hardware_version =
+ ((channel7_msr & 0x20) ? 0x01 : 0x00)
+ | ((channel7_msr & 0x80) ? 0x02 : 0x00)
+ | ((channel7_msr & 0x40) ? 0x04 : 0x00);
+
+ switch (unit_type) {
+ case HWTYPE_DLVISION_CON:
+ printf("DL-Vision-CON");
+ break;
+
+ case HWTYPE_DLVISION_CPU:
+ printf("DL-Vision-CPU");
+ break;
+
+ default:
+ printf("UnitType %d, unsupported", unit_type);
+ break;
+ }
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ puts("\n ");
+
+ switch (hardware_version) {
+ case HWREV_100:
+ printf("HW-Ver 1.00");
+ break;
+
+ default:
+ printf("HW-Ver %d, unsupported",
+ hardware_version);
+ break;
+ }
+
+ if (local_con)
+ printf(", local console");
+
+ if (audio)
+ printf(", audio support");
+
+ puts("\n");
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
start=get_timer(0);
/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
if (mfdcr(strap) & PSR_ROM_LOC)
- mtspr(ccr0, (mfspr(ccr0) & ~0x80));
+ mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
return (0);
}
/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
if (mfdcr(strap) & PSR_ROM_LOC)
- mtspr(ccr0, (mfspr(ccr0) & ~0x80));
+ mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
return (0);
}
/*
* Initiate system reset in debug control register DBCR
*/
- dbcr = mfspr(dbcr0);
- mtspr(dbcr0, dbcr | CHIP_RESET);
+ dbcr = mfspr(SPRN_DBCR0);
+ mtspr(SPRN_DBCR0, dbcr | CHIP_RESET);
}
mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/
#endif
/* We cannot easily enable trace before, as there are other
* routines messing around with sdr0_pfc1. And I do not need it.
*/
- if (mfspr(dbcr0) & 0x80000000) {
+ if (mfspr(SPRN_DBCR0) & 0x80000000) {
/* External debugger alive
* enable trace facilty for Lauterbach
* CCR0[DTB]=0 Enable broadcast of trace information
* SDR0_PFC0[TRE] Trace signals are enabled instead of
* GPIO49-63
*/
- mtspr(ccr0, mfspr(ccr0) &~ (CCR0_DTB));
+ mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) &~ (CCR0_DTB));
mtsdr(SDR0_PFC0, sdr0_pfc1 | SDR0_PFC0_TRE_ENABLE);
}
return 0;
u32 *magicPtr;
u32 magic;
- if ((mfspr(dbcr0) & 0x80000000) == 0) {
+ if ((mfspr(SPRN_DBCR0) & 0x80000000) == 0) {
/* only if no external debugger is alive!
* Check whether vxWorks is using EDR logging, if yes zero
* also PostMortem and user reserved memory
* If not done, then we could get an interrupt later on when
* exceptions are enabled.
*/
- mtspr(mcsr, mfspr(mcsr));
+ mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
/* Set 'int_mask' parameter to functionnal value */
mfsdram(DDR0_01, val);
out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR );
out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR);
out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR);
- mtspr(ccr0, 0x00700000);
+ mtspr(SPRN_CCR0, 0x00700000);
return 0;
}
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o
SOBJS = init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
/*
-* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
* project.
#include <config.h>
/* General */
-#define TLB_VALID 0x00000200
+#define TLB_VALID 0x00000200
/* Supported page sizes */
-
-#define SZ_1K 0x00000000
-#define SZ_4K 0x00000010
-#define SZ_16K 0x00000020
-#define SZ_64K 0x00000030
-#define SZ_256K 0x00000040
-#define SZ_1M 0x00000050
-#define SZ_16M 0x00000070
-#define SZ_256M 0x00000090
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
/* Storage attributes */
-#define SA_W 0x00000800 /* Write-through */
-#define SA_I 0x00000400 /* Caching inhibited */
-#define SA_M 0x00000200 /* Memory coherence */
-#define SA_G 0x00000100 /* Guarded */
-#define SA_E 0x00000080 /* Endian */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
/* Access control */
-#define AC_X 0x00000024 /* Execute */
-#define AC_W 0x00000012 /* Write */
-#define AC_R 0x00000009 /* Read */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
/* Some handy macros */
-
#define EPN(e) ((e) & 0xfffffc00)
-#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a) ( (a)&0x00000fbf )
+#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
+#define TLB1(rpn,erpn) (((rpn)&0xfffffc00) | (erpn))
+#define TLB2(a) ((a)&0x00000fbf)
-#define tlbtab_start\
- mflr r1 ;\
- bl 0f ;
+#define tlbtab_start \
+ mflr r1; \
+ bl 0f;
-#define tlbtab_end\
- .long 0, 0, 0 ; \
-0: mflr r0 ; \
- mtlr r1 ; \
- blr ;
+#define tlbtab_end \
+ .long 0, 0, 0; \
+0: mflr r0; \
+ mtlr r1; \
+ blr;
#define tlbentry(epn,sz,rpn,erpn,attr)\
.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-/**************************************************************************
+/*
* TLB TABLE
*
* This table is used by the cpu boot code to setup the initial tlb
* entries. Rather than make broad assumptions in the cpu source tree,
* this table lets each board set things up however they like.
*
- * Pointer to the table is returned in r1
- *
- *************************************************************************/
+ * Pointer to the table is returned in r1
+ */
.section .bootpg,"ax"
.globl tlbtab
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/xpedite1k/init.o (.text)
+ board/xes/xpedite1000/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
lib_ppc/extable.o (.text)
lib_generic/zlib.o (.text)
-/* . = env_offset;*/
-/* common/env_embedded.o(.text)*/
-
*(.text)
*(.fixup)
*(.got1)
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/xpedite1k/init.o (.text)
+ board/xes/xpedite1000/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
--- /dev/null
+/*
+ * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ unsigned long sdrreg;
+
+ /*
+ * Enable GPIO for pins 18 - 24
+ * 18 = SEEPROM_WP
+ * 19 = #M_RST
+ * 20 = #MONARCH
+ * 21 = #LED_ALARM
+ * 22 = #LED_ACT
+ * 23 = #LED_STATUS1
+ * 24 = #LED_STATUS2
+ */
+ mfsdr(sdr_pfc0, sdrreg);
+ mtsdr(sdr_pfc0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00);
+ out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
+ LED0_OFF();
+ LED1_OFF();
+ LED2_OFF();
+ LED3_OFF();
+
+ /* Setup the external bus controller/chip selects */
+ mtebc(pb0ap, 0x04055200); /* 16MB Strata FLASH */
+ mtebc(pb0cr, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */
+ mtebc(pb1ap, 0x04055200); /* 512KB Socketed AMD FLASH */
+ mtebc(pb1cr, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */
+ mtebc(pb6ap, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */
+ mtebc(pb6cr, 0xf00da000); /* BAS=0xf00 64MB R/W i6-bit */
+ mtebc(pb7ap, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */
+ mtebc(pb7cr, 0xf40da000); /* BAS=0xf40 64MB R/W 16-bit */
+
+ /*
+ * Setup the interrupt controller polarities, triggers, etc.
+ *
+ * Because of the interrupt handling rework to handle 440GX interrupts
+ * with the common code, we needed to change names of the UIC registers.
+ * Here the new relationship:
+ *
+ * U-Boot name 440GX name
+ * -----------------------
+ * UIC0 UICB0
+ * UIC1 UIC0
+ * UIC2 UIC1
+ * UIC3 UIC2
+ */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */
+ mtdcr(uic1pr, 0xfffffe00); /* per ref-board manual */
+ mtdcr(uic1tr, 0x01c00000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0xffffc0ff); /* per ref-board manual */
+ mtdcr(uic2tr, 0x00ff8000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic3sr, 0xffffffff); /* clear all */
+ mtdcr(uic3er, 0x00000000); /* disable all */
+ mtdcr(uic3cr, 0x00000000); /* all non-critical */
+ mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic3tr, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr(uic3vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic3sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic0sr, 0xfc000000); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000000); /* all non-critical */
+ mtdcr(uic0pr, 0xfc000000); /* */
+ mtdcr(uic0tr, 0x00000000); /* */
+ mtdcr(uic0vr, 0x00000001); /* */
+
+ LED0_ON();
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s;
+
+ printf("Board: X-ES %s PMC SBC\n", CONFIG_SYS_BOARD_NAME);
+ printf(" ");
+ s = getenv("board_rev");
+ if (s)
+ printf("Rev %s, ", s);
+ s = getenv("serial#");
+ if (s)
+ printf("Serial# %s, ", s);
+ s = getenv("board_cfg");
+ if (s)
+ printf("Cfg %s", s);
+ printf("\n");
+
+ return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+ return spd_sdram();
+}
+
+/*
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
+
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose)
+{
+ unsigned long strap;
+
+ /* See if we're supposed to setup the pci */
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & 0x00010000) == 0)
+ return 0;
+
+#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
+ /* Setup System Device Register PCIX0_XCR */
+ mfsdr(sdr_xcr, strap);
+ strap &= 0x0f000000;
+ mtsdr(sdr_xcr, strap);
+#endif
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
+/*
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+void pci_target_init(struct pci_controller * hose)
+{
+ /* Disable everything */
+ out32r(PCIX0_PIM0SA, 0);
+ out32r(PCIX0_PIM1SA, 0);
+ out32r(PCIX0_PIM2SA, 0);
+ out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
+
+ /*
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ */
+ out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+ out32r(PCIX0_PIM0LAH, 0);
+ out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+
+ out32r(PCIX0_BAR0, 0);
+
+ /* Program the board's subsystem id/vendor id */
+ out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+ out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+
+ out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI)
+/*
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+ return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
+}
+#endif /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return ctrlc();
+}
+
+void post_word_store(ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
+
+ *save_addr = a;
+}
+
+ulong post_word_load(void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
+
+ return *save_addr;
+}
+#endif
+++ /dev/null
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-/*
- * Ported to XPedite1000, 1/2 mb boot flash only
- * Travis B. Sawyer, <travis.sawyer@sandburst.com>
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define BOOT_SMALL_FLASH 32 /* 00100000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-
-#define BOOT_SMALL_FLASH_VAL 4
-#define FLASH_ONBD_N_VAL 2
-#define FLASH_SRAM_SEL_VAL 1
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
- {0xfff80000}, /* 0:000: configuraton 3 */
- {0xfff90000}, /* 1:001: configuraton 4 */
- {0xfffa0000}, /* 2:010: configuraton 7 */
- {0xfffb0000}, /* 3:011: configuraton 8 */
- {0xfffc0000}, /* 4:100: configuraton 1 */
- {0xfffd0000}, /* 5:101: configuraton 2 */
- {0xfffe0000}, /* 6:110: configuraton 5 */
- {0xffff0000} /* 7:111: configuraton 6 */
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-
-#ifdef CONFIG_XPEDITE1K
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long total_b = 0;
- unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
- unsigned short index = 0;
- int i;
-
-
- DEBUGF("\n");
- DEBUGF("FLASH: Index: %d\n", index);
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
-
- /* check whether the address is 0 */
- if (flash_addr_table[index][i] == 0) {
- continue;
- }
-
- /* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size(
- (vu_long *)flash_addr_table[index][i], &flash_info[i]);
- flash_info[i].size = size_b[i];
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i]<<20);
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
- }
-
- total_b += flash_info[i].size;
- }
-
- return total_b;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n");
- break;
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " "
- );
- }
- printf ("\n");
- return;
- }
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
- DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
-
- /* Write auto select command: read Manufacturer ID */
- udelay(10000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- udelay(1000);
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- udelay(1000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
- udelay(1000);
-
-#ifdef CONFIG_ADCIOP
- value = addr2[2];
-#else
- value = addr2[0];
-#endif
-
- DEBUGF("FLASH MANUFACT: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- case (FLASH_WORD_SIZE)STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- debug ("\ndev_code=%x\n", value);
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_LV040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000; /* => 512 kb */
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040) ||
- (info->flash_id == FLASH_AMD016)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- info->protect[i] = addr2[4] & 1;
-#else
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
-#endif
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile unsigned char *)info->start[0];
- addr2[ADDR0] = 0xAA;
- addr2[ADDR1] = 0x55;
- addr2[ADDR0] = 0xF0; /* reset bank */
-#else
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif
-#else /* test-only */
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif /* test-only */
- }
-
- return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t *info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
- start = get_timer (0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
- printf("Erasing sector %p\n", addr2);
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- for (i=0; i<50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7(info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7(info, l_sect);
-
-DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
+++ /dev/null
-/*
- * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define BOOT_SMALL_FLASH 32 /* 00100000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-
-long int fixed_sdram (void);
-
-int board_early_init_f(void)
-{
- unsigned long sdrreg;
- /* TBS: Setup the GPIO access for the user LEDs */
- mfsdr(sdr_pfc0, sdrreg);
- mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00);
- out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
- LED0_OFF();
- LED1_OFF();
- LED2_OFF();
- LED3_OFF();
-
- /*--------------------------------------------------------------------
- * Setup the external bus controller/chip selects
- *-------------------------------------------------------------------*/
-
- /* set the bus controller */
- mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */
- mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
- mtebc (pb1ap, 0x04055200); /* FLASH/SRAM */
- mtebc (pb1cr, 0xfe098000); /* BAS=0xff8 16MB R/W 8-bit */
-
- /*--------------------------------------------------------------------
- * Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
- /*
- * Because of the interrupt handling rework to handle 440GX interrupts
- * with the common code, we needed to change names of the UIC registers.
- * Here the new relationship:
- *
- * U-Boot name 440GX name
- * -----------------------
- * UIC0 UICB0
- * UIC1 UIC0
- * UIC2 UIC1
- * UIC3 UIC2
- */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe00); /* per ref-board manual */
- mtdcr (uic1tr, 0x01c00000); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffc0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ff8000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
-
- LED0_ON();
-
-
- return 0;
-}
-
-int checkboard (void)
-{
- printf ("Board: XES XPedite1000 440GX\n");
-
- return (0);
-}
-
-
-phys_size_t initdram (int board_type)
-{
- long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram ();
-#else
- dram_size = fixed_sdram ();
-#endif
- return dram_size;
-}
-
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) 0x00000000;
- uint *pend = (uint *) 0x08000000;
- uint *p;
-
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
- return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- * fixed sdram init -- doesn't use serial presence detect.
- *
- * Assumes: 128 MB, non-ECC, non-registered
- * PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram (void)
-{
- uint reg;
-
- /*--------------------------------------------------------------------
- * Setup some default
- *------------------------------------------------------------------*/
- mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
-
- /*--------------------------------------------------------------------
- * Setup for board-specific specific mem
- *------------------------------------------------------------------*/
- /*
- * Following for CAS Latency = 2.5 @ 133 MHz PLB
- */
- mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
- /* RA=10 RD=3 */
- mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
- udelay (400); /* Delay 200 usecs (min) */
-
- /*--------------------------------------------------------------------
- * Enable the controller, then wait for DCEN to complete
- *------------------------------------------------------------------*/
- mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
- for (;;) {
- mfsdram (mem_mcsts, reg);
- if (reg & 0x80000000)
- break;
- }
-
- return (128 * 1024 * 1024); /* 128 MB */
-}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
-
-
-/*************************************************************************
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
- *
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller * hose )
-{
- unsigned long strap;
- /* See if we're supposed to setup the pci */
- mfsdr(sdr_sdstp1, strap);
- if ((strap & 0x00010000) == 0) {
- return (0);
- }
-
-#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
- /* Setup System Device Register PCIX0_XCR */
- mfsdr(sdr_xcr, strap);
- strap &= 0x0f000000;
- mtsdr(sdr_xcr, strap);
-#endif
- return 1;
-}
-#endif /* defined(CONFIG_PCI) */
-
-/*************************************************************************
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
-{
- /*--------------------------------------------------------------------------+
- * Disable everything
- *--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0SA, 0 ); /* disable */
- out32r( PCIX0_PIM1SA, 0 ); /* disable */
- out32r( PCIX0_PIM2SA, 0 ); /* disable */
- out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
-
- /*--------------------------------------------------------------------------+
- * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
- * options to not support sizes such as 128/256 MB.
- *--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
- out32r( PCIX0_PIM0LAH, 0 );
- out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-
- out32r( PCIX0_BAR0, 0 );
-
- /*--------------------------------------------------------------------------+
- * Program the board's subsystem id/vendor id
- *--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
-
- out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
-
-/*************************************************************************
- * is_pci_host
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
- return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
-}
-#endif /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-
- return (ctrlc());
-}
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
- return *save_addr;
-}
-#endif
-
-/*-----------------------------------------------------------------------------
- * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM
- *-----------------------------------------------------------------------------
- */
-static int read_i2c;
-static void board_get_enetaddr(uchar *enet)
-{
- int i;
- unsigned char buff[0x100], *cp;
-
- if (read_i2c)
- return;
-
- /* Initialize I2C */
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /* Read 256 bytes in EEPROM */
- i2c_read (0x50, 0, 1, buff, 0x100);
-
- cp = &buff[0xF4];
- for (i = 0; i < 6; i++,cp++)
- enet[i] = *cp;
-
- printf("MAC address = %pM\n", enet);
- read_i2c = 1;
-}
-
-int misc_init_r(void)
-{
- uchar enetaddr[6], i2c_enetaddr[6];
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- board_get_enetaddr(i2c_enetaddr);
- eth_setenv_enetaddr("ethaddr", i2c_enetaddr);
- }
-
-#ifdef CONFIG_HAS_ETH1
- if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
- board_get_enetaddr(i2c_enetaddr);
- eth_setenv_enetaddr("eth1addr", i2c_enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH2
- if (!eth_getenv_enetaddr("eth2addr", enetaddr)) {
- board_get_enetaddr(i2c_enetaddr);
- eth_setenv_enetaddr("eth2addr", i2c_enetaddr);
- }
-#endif
-
-#ifdef CONFIG_HAS_ETH3
- if (!eth_getenv_enetaddr("eth3addr", enetaddr)) {
- board_get_enetaddr(i2c_enetaddr);
- eth_setenv_enetaddr("eth3addr", i2c_enetaddr);
- }
-#endif
-
- return 0;
-}
COBJS += 4xx_pci.o
COBJS += 4xx_pcie.o
COBJS += bedbug_405.o
+ifdef CONFIG_CMD_CHIP_CONFIG
+COBJS += cmd_chip_config.o
+endif
COBJS += commproc.o
COBJS += cpu.o
COBJS += cpu_init.o
--- /dev/null
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/ppc4xx_config.h>
+#include <asm/io.h>
+
+static void print_configs(int cur_config_nr)
+{
+ int i;
+
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ printf("%-16s - %s", ppc4xx_config_val[i].label,
+ ppc4xx_config_val[i].description);
+ if (i == cur_config_nr)
+ printf(" ***");
+ printf("\n");
+ }
+
+}
+
+static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int i;
+ int ret;
+ int cur_config_nr = -1;
+ u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
+
+#ifdef CONFIG_CMD_EEPROM
+ ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+ ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+ if (ret) {
+ printf("Error reading EEPROM at addr 0x%x\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ return -1;
+ }
+
+ /*
+ * Search the current configuration
+ */
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ if (memcmp(cur_config, ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
+ cur_config_nr = i;
+ }
+
+ if (cur_config_nr == -1) {
+ printf("Warning: The I2C bootstrap values don't match any"
+ " of the available options!\n");
+ printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
+ printf("%02x ", cur_config[i]);
+ }
+ printf("\n");
+ }
+
+ if (argc < 2) {
+ printf("Available configurations (I2C address 0x%02x):\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ print_configs(cur_config_nr);
+ return 0;
+ }
+
+ for (i = 0; i < ppc4xx_config_count; i++) {
+ /*
+ * Search for configuration name/label
+ */
+ if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
+ printf("Using configuration:\n%-16s - %s\n",
+ ppc4xx_config_val[i].label,
+ ppc4xx_config_val[i].description);
+
+#ifdef CONFIG_CMD_EEPROM
+ ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+ ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+ 1, ppc4xx_config_val[i].val,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+ udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+ if (ret) {
+ printf("Error updating EEPROM at addr 0x%x\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+ return -1;
+ }
+
+ printf("done (dump via 'i2c md %x 0.1 %x')\n",
+ CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+ CONFIG_4xx_CONFIG_BLOCKSIZE);
+ printf("Reset the board for the changes to"
+ " take effect\n");
+ return 0;
+ }
+ }
+
+ printf("Configuration %s not found!\n", argv[1]);
+ print_configs(cur_config_nr);
+ return -1;
+}
+
+U_BOOT_CMD(
+ chip_config, 2, 0, do_chip_config,
+ "program the I2C bootstrap EEPROM",
+ "[config-label]"
+);
mtdcr (cpc0_sys0, sys0);
mtdcr (cpc0_sys1, sys1);
mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000); /* Clr SWE */
- mtspr (dbcr0, 0x20000000); /* Reset the chip */
+ mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */
return 1;
}
board_reset();
#else
#if defined(CONFIG_SYS_4xx_RESET_TYPE)
- mtspr(dbcr0, CONFIG_SYS_4xx_RESET_TYPE << 28);
+ mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28);
#else
/*
* Initiate system reset in debug control register DBCR
*/
- mtspr(dbcr0, 0x30000000);
+ mtspr(SPRN_DBCR0, 0x30000000);
#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
#endif /* defined(CONFIG_BOARD_RESET) */
/*
* Clear TSR(WIS) bit
*/
- mtspr(tsr, 0x40000000);
+ mtspr(SPRN_TSR, 0x40000000);
}
#endif /* CONFIG_WATCHDOG */
/* Reset processor if configuration changed */
if (reset_needed) {
__asm__ __volatile__ ("sync; isync");
- mtspr(dbcr0, 0x20000000);
+ mtspr(SPRN_DBCR0, 0x20000000);
}
#endif
}
* Init PIT
*/
#if defined(CONFIG_440)
- val = mfspr( tcr );
+ val = mfspr( SPRN_TCR );
val &= (~0x04400000); /* clear DIS & ARE */
- mtspr( tcr, val );
- mtspr( dec, 0 ); /* Prevent exception after TSR clear*/
- mtspr( decar, 0 ); /* clear reload */
- mtspr( tsr, 0x08000000 ); /* clear DEC status */
+ mtspr( SPRN_TCR, val );
+ mtspr( SPRN_DEC, 0 ); /* Prevent exception after TSR clear*/
+ mtspr( SPRN_DECAR, 0 ); /* clear reload */
+ mtspr( SPRN_TSR, 0x08000000 ); /* clear DEC status */
val = gd->bd->bi_intfreq/1000; /* 1 msec */
- mtspr( decar, val ); /* Set auto-reload value */
- mtspr( dec, val ); /* Set inital val */
+ mtspr( SPRN_DECAR, val ); /* Set auto-reload value */
+ mtspr( SPRN_DEC, val ); /* Set inital val */
#else
set_pit(gd->bd->bi_intfreq / 1000);
#endif
/*
* Enable PIT
*/
- val = mfspr(tcr);
+ val = mfspr(SPRN_TCR);
val |= 0x04400000;
- mtspr(tcr, val);
+ mtspr(SPRN_TCR, val);
/*
* Set EVPR to 0
sysInfo->freqUART = sysInfo->freqPLB;
/* Figure which timer source to use */
- if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
+ if (mfspr(SPRN_CCR1) & 0x0080) {
+ /* External Clock, assume same as SYS_CLK */
temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
if (CONFIG_SYS_CLK_FREQ > temp)
sysInfo->freqTmrClk = temp;
sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
+ sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+
sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
}
| Core bug fix. Clear the esr
+-----------------------------------------------------------------*/
li r0,0
- mtspr esr,r0
+ mtspr SPRN_ESR,r0
/*----------------------------------------------------------------*/
/* Clear and set up some registers. */
/*----------------------------------------------------------------*/
dccci r0,r0 /* NOTE: operands not used for 440 */
sync
li r0,0
- mtspr srr0,r0
- mtspr srr1,r0
- mtspr csrr0,r0
- mtspr csrr1,r0
+ mtspr SPRN_SRR0,r0
+ mtspr SPRN_SRR1,r0
+ mtspr SPRN_CSRR0,r0
+ mtspr SPRN_CSRR1,r0
/* NOTE: 440GX adds machine check status regs */
#if defined(CONFIG_440) && !defined(CONFIG_440GP)
- mtspr mcsrr0,r0
- mtspr mcsrr1,r0
- mfspr r1,mcsr
- mtspr mcsr,r1
+ mtspr SPRN_MCSRR0,r0
+ mtspr SPRN_MCSRR1,r0
+ mfspr r1,SPRN_MCSR
+ mtspr SPRN_MCSR,r1
#endif
/*----------------------------------------------------------------*/
*/
lis r1,0x0030 /* store gathering & broadcast disable */
ori r1,r1,0x6000 /* cache touch */
- mtspr ccr0,r1
+ mtspr SPRN_CCR0,r1
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
- mfspr r1,dbcr0
+ mfspr r1,SPRN_DBCR0
andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
bne skip_debug_init /* if set, don't clear debug register */
- mtspr dbcr0,r0
- mtspr dbcr1,r0
- mtspr dbcr2,r0
- mtspr iac1,r0
- mtspr iac2,r0
- mtspr iac3,r0
- mtspr dac1,r0
- mtspr dac2,r0
- mtspr dvc1,r0
- mtspr dvc2,r0
-
- mfspr r1,dbsr
- mtspr dbsr,r1 /* Clear all valid bits */
+ mtspr SPRN_DBCR0,r0
+ mtspr SPRN_DBCR1,r0
+ mtspr SPRN_DBCR2,r0
+ mtspr SPRN_IAC1,r0
+ mtspr SPRN_IAC2,r0
+ mtspr SPRN_IAC3,r0
+ mtspr SPRN_DAC1,r0
+ mtspr SPRN_DAC2,r0
+ mtspr SPRN_DVC1,r0
+ mtspr SPRN_DVC2,r0
+
+ mfspr r1,SPRN_DBSR
+ mtspr SPRN_DBSR,r1 /* Clear all valid bits */
skip_debug_init:
#if defined (CONFIG_440SPE)
| j. TCS: Timebase increments from CPU clock.
+-----------------------------------------------------------------*/
li r0,0
- mtspr ccr1, r0
+ mtspr SPRN_CCR1, r0
/*----------------------------------------------------------------+
| Reset the timebase.
| The previous write to CCR1 sets the timebase source.
+-----------------------------------------------------------------*/
- mtspr tbl, r0
- mtspr tbu, r0
+ mtspr SPRN_TBWL, r0
+ mtspr SPRN_TBWU, r0
#endif
/*----------------------------------------------------------------*/
/* Setup interrupt vectors */
/*----------------------------------------------------------------*/
- mtspr ivpr,r0 /* Vectors start at 0x0000_0000 */
+ mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */
li r1,0x0100
- mtspr ivor0,r1 /* Critical input */
+ mtspr SPRN_IVOR0,r1 /* Critical input */
li r1,0x0200
- mtspr ivor1,r1 /* Machine check */
+ mtspr SPRN_IVOR1,r1 /* Machine check */
li r1,0x0300
- mtspr ivor2,r1 /* Data storage */
+ mtspr SPRN_IVOR2,r1 /* Data storage */
li r1,0x0400
- mtspr ivor3,r1 /* Instruction storage */
+ mtspr SPRN_IVOR3,r1 /* Instruction storage */
li r1,0x0500
- mtspr ivor4,r1 /* External interrupt */
+ mtspr SPRN_IVOR4,r1 /* External interrupt */
li r1,0x0600
- mtspr ivor5,r1 /* Alignment */
+ mtspr SPRN_IVOR5,r1 /* Alignment */
li r1,0x0700
- mtspr ivor6,r1 /* Program check */
+ mtspr SPRN_IVOR6,r1 /* Program check */
li r1,0x0800
- mtspr ivor7,r1 /* Floating point unavailable */
+ mtspr SPRN_IVOR7,r1 /* Floating point unavailable */
li r1,0x0c00
- mtspr ivor8,r1 /* System call */
+ mtspr SPRN_IVOR8,r1 /* System call */
li r1,0x0a00
- mtspr ivor9,r1 /* Auxiliary Processor unavailable */
+ mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */
li r1,0x0900
- mtspr ivor10,r1 /* Decrementer */
+ mtspr SPRN_IVOR10,r1 /* Decrementer */
li r1,0x1300
- mtspr ivor13,r1 /* Data TLB error */
+ mtspr SPRN_IVOR13,r1 /* Data TLB error */
li r1,0x1400
- mtspr ivor14,r1 /* Instr TLB error */
+ mtspr SPRN_IVOR14,r1 /* Instr TLB error */
li r1,0x2000
- mtspr ivor15,r1 /* Debug */
+ mtspr SPRN_IVOR15,r1 /* Debug */
/*----------------------------------------------------------------*/
/* Configure cache regions */
/*----------------------------------------------------------------*/
- mtspr inv0,r0
- mtspr inv1,r0
- mtspr inv2,r0
- mtspr inv3,r0
- mtspr dnv0,r0
- mtspr dnv1,r0
- mtspr dnv2,r0
- mtspr dnv3,r0
- mtspr itv0,r0
- mtspr itv1,r0
- mtspr itv2,r0
- mtspr itv3,r0
- mtspr dtv0,r0
- mtspr dtv1,r0
- mtspr dtv2,r0
- mtspr dtv3,r0
+ mtspr SPRN_INV0,r0
+ mtspr SPRN_INV1,r0
+ mtspr SPRN_INV2,r0
+ mtspr SPRN_INV3,r0
+ mtspr SPRN_DNV0,r0
+ mtspr SPRN_DNV1,r0
+ mtspr SPRN_DNV2,r0
+ mtspr SPRN_DNV3,r0
+ mtspr SPRN_ITV0,r0
+ mtspr SPRN_ITV1,r0
+ mtspr SPRN_ITV2,r0
+ mtspr SPRN_ITV3,r0
+ mtspr SPRN_DTV0,r0
+ mtspr SPRN_DTV1,r0
+ mtspr SPRN_DTV2,r0
+ mtspr SPRN_DTV3,r0
/*----------------------------------------------------------------*/
/* Cache victim limits */
*/
lis r1,0x0001
ori r1,r1,0xf800
- mtspr ivlim,r1
- mtspr dvlim,r1
+ mtspr SPRN_IVLIM,r1
+ mtspr SPRN_DVLIM,r1
/*----------------------------------------------------------------+
|Initialize MMUCR[STID] = 0.
+-----------------------------------------------------------------*/
- mfspr r0,mmucr
+ mfspr r0,SPRN_MMUCR
addis r1,0,0xFFFF
ori r1,r1,0xFF00
and r0,r0,r1
- mtspr mmucr,r0
+ mtspr SPRN_MMUCR,r0
/*----------------------------------------------------------------*/
/* Clear all TLB entries -- TID = 0, TS = 0 */
/*----------------------------------------------------------------*/
addis r0,0,0x0000
- li r1,0x003f /* 64 TLB entries */
- mtctr r1
+#ifdef CONFIG_SYS_RAMBOOT
li r4,0 /* Start with TLB #0 */
+#else
+ li r4,1 /* Start with TLB #1 */
+#endif
+ li r1,64 /* 64 TLB entries */
+ sub r1,r1,r4 /* calculate last TLB # */
+ mtctr r1
rsttlb:
#ifdef CONFIG_SYS_RAMBOOT
tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
b _start
3: li r0,0
- mtspr srr1,r0 /* Keep things disabled for now */
+ mtspr SPRN_SRR1,r0 /* Keep things disabled for now */
mflr r1
- mtspr srr0,r1
+ mtspr SPRN_SRR0,r1
rfi
#endif /* CONFIG_440 */
/*----------------------------------------------------------------*/
li r0,0x0000
lis r1,0xffff
- mtspr dec,r0 /* prevent dec exceptions */
- mtspr tbl,r0 /* prevent fit & wdt exceptions */
- mtspr tbu,r0
- mtspr tsr,r1 /* clear all timer exception status */
- mtspr tcr,r0 /* disable all */
- mtspr esr,r0 /* clear exception syndrome register */
+ mtspr SPRN_DEC,r0 /* prevent dec exceptions */
+ mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */
+ mtspr SPRN_TBWU,r0
+ mtspr SPRN_TSR,r1 /* clear all timer exception status */
+ mtspr SPRN_TCR,r0 /* disable all */
+ mtspr SPRN_ESR,r0 /* clear exception syndrome register */
mtxer r0 /* clear integer exception register */
/*----------------------------------------------------------------*/
#if defined(CONFIG_SYS_INIT_DBCR)
lis r1,0xffff
ori r1,r1,0xffff
- mtspr dbsr,r1 /* Clear all status bits */
+ mtspr SPRN_DBSR,r1 /* Clear all status bits */
lis r0,CONFIG_SYS_INIT_DBCR@h
ori r0,r0,CONFIG_SYS_INIT_DBCR@l
- mtspr dbcr0,r0
+ mtspr SPRN_DBCR0,r0
isync
#endif
/* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
lis r1,0x0201
ori r1,r1,0xf808
- mtspr dvlim,r1
+ mtspr SPRN_DVLIM,r1
lis r1,0x0808
ori r1,r1,0x0808
- mtspr dnv0,r1
- mtspr dnv1,r1
- mtspr dnv2,r1
- mtspr dnv3,r1
- mtspr dtv0,r1
- mtspr dtv1,r1
- mtspr dtv2,r1
- mtspr dtv3,r1
+ mtspr SPRN_DNV0,r1
+ mtspr SPRN_DNV1,r1
+ mtspr SPRN_DNV2,r1
+ mtspr SPRN_DNV3,r1
+ mtspr SPRN_DTV0,r1
+ mtspr SPRN_DTV1,r1
+ mtspr SPRN_DTV2,r1
+ mtspr SPRN_DTV3,r1
msync
isync
#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
/* Set up some machine state registers. */
/*----------------------------------------------------------------------- */
addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr esr,r0 /* clear Exception Syndrome Reg */
+ mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
mttcr r0 /* timer control register */
mtexier r0 /* disable all interrupts */
addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
/*----------------------------------------------------------------------- */
addi r4,r0,0x0000
#if !defined(CONFIG_405EX)
- mtspr sgr,r4
+ mtspr SPRN_SGR,r4
#else
/*
* On 405EX, completely clearing the SGR leads to PPC hangup
*/
lis r3,0x0000
ori r3,r3,0x7FFC
- mtspr sgr,r3
+ mtspr SPRN_SGR,r3
#endif
- mtspr dcwr,r4
+ mtspr SPRN_DCWR,r4
mtesr r4 /* clear Exception Syndrome Reg */
mttcr r4 /* clear Timer Control Reg */
mtxer r4 /* clear Fixed-Point Exception Reg */
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
- mtspr csrr0,r2
- mtspr csrr1,r0
+ mtspr SPRN_CSRR0,r2
+ mtspr SPRN_CSRR1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
REST_GPR(31, r1)
lwz r2,_NIP(r1) /* Restore environment */
lwz r0,_MSR(r1)
- mtspr mcsrr0,r2
- mtspr mcsrr1,r0
+ mtspr SPRN_MCSRR0,r2
+ mtspr SPRN_MCSRR1,r0
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
/* set TFLOOR/NFLOOR to 0 again */
lis r6,0x0001
ori r6,r6,0xf800
- mtspr dvlim,r6
+ mtspr SPRN_DVLIM,r6
lis r6,0x0000
ori r6,r6,0x0000
- mtspr dnv0,r6
- mtspr dnv1,r6
- mtspr dnv2,r6
- mtspr dnv3,r6
- mtspr dtv0,r6
- mtspr dtv1,r6
- mtspr dtv2,r6
- mtspr dtv3,r6
+ mtspr SPRN_DNV0,r6
+ mtspr SPRN_DNV1,r6
+ mtspr SPRN_DNV2,r6
+ mtspr SPRN_DNV3,r6
+ mtspr SPRN_DTV0,r6
+ mtspr SPRN_DTV1,r6
+ mtspr SPRN_DTV2,r6
+ mtspr SPRN_DTV3,r6
msync
isync
#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
isync
/* Clear all potential pending exceptions */
- mfspr r1,mcsr
- mtspr mcsr,r1
+ mfspr r1,SPRN_MCSR
+ mtspr SPRN_MCSR,r1
#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
#else
__440_msr_set:
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtspr srr1,r7
+ mtspr SPRN_SRR1,r7
mflr r7
- mtspr srr0,r7
+ mtspr SPRN_SRR0,r7
rfi
__440_msr_continue:
#endif
* Not sure if this is needed...
*/
addis r3,0,0x1000
- mtspr dbcr0,r3 /* This will cause a CPU core reset, and */
+ mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */
/* execution will continue from the poweron */
/* vector of 0xfffffffc */
#endif /* CONFIG_405EP */
#ifndef __ASM_PPC_GPIO_H
#define __ASM_PPC_GPIO_H
+#include <asm/types.h>
+
/* 4xx PPC's have 2 GPIO controllers */
#if defined(CONFIG_405EZ) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
#define GPIO_GROUP_MAX 1
#endif
+/* GPIO controller */
+struct ppc4xx_gpio {
+ u32 or; /* Output Control */
+ u32 tcr; /* Tri-State Control */
+ u32 osl; /* Output Select 16..31 */
+ u32 osh; /* Output Select 0..15 */
+ u32 tsl; /* Tri-State Select 16..31 */
+ u32 tsh; /* Tri-State Select 0..15 */
+ u32 odr; /* Open Drain */
+ u32 ir; /* Input */
+ u32 rr1; /* Receive Register 1 */
+ u32 rr2; /* Receive Register 2 */
+ u32 rr3; /* Receive Register 3 */
+ u32 reserved;
+ u32 is1l; /* Input Select 1 16..31 */
+ u32 is1h; /* Input Select 1 0..15 */
+ u32 is2l; /* Input Select 2 16..31 */
+ u32 is2h; /* Input Select 2 0..15 */
+ u32 is3l; /* Input Select 3 16..31 */
+ u32 is3h; /* Input Select 3 0..15 */
+};
+
/* Offsets */
#define GPIOx_OR 0x00 /* GPIO Output Register */
#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
--- /dev/null
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PPC4xx_CONFIG_H
+#define __PPC4xx_CONFIG_H
+
+#include <common.h>
+
+struct ppc4xx_config {
+ char label[16];
+ char description[64];
+ u8 val[CONFIG_4xx_CONFIG_BLOCKSIZE];
+};
+
+extern struct ppc4xx_config ppc4xx_config_val[];
+extern int ppc4xx_config_count;
+
+#endif /* __PPC4xx_CONFIG_H */
#define CONFIG_BOOKE
#endif
+#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
+#ifdef CONFIG_BOOKE
+#define SPRN_CCR1 0x378 /* Core Configuration Register for 440 only */
+#endif
#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define SPRN_DBSR 0x3F0 /* Debug Status Register */
#else
#define SPRN_DBCR1 0x135 /* Book E Debug Control Register 1 */
+#ifdef CONFIG_BOOKE
+#define SPRN_DBDR 0x3f3 /* Debug Data Register */
+#endif
#define SPRN_DBSR 0x130 /* Book E Debug Status Register */
#define DBSR_IC 0x08000000 /* Book E Instruction Completion */
#define DBSR_TIE 0x01000000 /* Book E Trap Instruction Event */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define DCCR_NOCACHE 0 /* Noncacheable */
#define DCCR_CACHE 1 /* Cacheable */
+#ifndef CONFIG_BOOKE
+#define SPRN_DCDBTRL 0x39c /* Data Cache Debug Tag Register Low */
+#define SPRN_DCDBTRH 0x39d /* Data Cache Debug Tag Register High */
+#endif
#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
#define DCWR_COPY 0 /* Copy-back */
#endif /* CONFIG_BOOKE */
#define SPRN_DEC 0x016 /* Decrement Register */
#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_DNV0 0x390 /* Data Cache Normal Victim 0 */
+#define SPRN_DNV1 0x391 /* Data Cache Normal Victim 1 */
+#define SPRN_DNV2 0x392 /* Data Cache Normal Victim 2 */
+#define SPRN_DNV3 0x393 /* Data Cache Normal Victim 3 */
+#endif
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_DTV0 0x394 /* Data Cache Transient Victim 0 */
+#define SPRN_DTV1 0x395 /* Data Cache Transient Victim 1 */
+#define SPRN_DTV2 0x396 /* Data Cache Transient Victim 2 */
+#define SPRN_DTV3 0x397 /* Data Cache Transient Victim 3 */
+#define SPRN_DVLIM 0x398 /* Data Cache Victim Limit */
+#endif
#define SPRN_EAR 0x11A /* External Address Register */
#ifndef CONFIG_BOOKE
#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
#define ICCR_NOCACHE 0 /* Noncacheable */
#define ICCR_CACHE 1 /* Cacheable */
#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_ICDBTRL 0x39e /* instruction cache debug tag register low */
+#define SPRN_ICDBTRH 0x39f /* instruction cache debug tag register high */
+#endif
#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_INV0 0x370 /* Instruction Cache Normal Victim 0 */
+#define SPRN_INV1 0x371 /* Instruction Cache Normal Victim 1 */
+#define SPRN_INV2 0x372 /* Instruction Cache Normal Victim 2 */
+#define SPRN_INV3 0x373 /* Instruction Cache Normal Victim 3 */
+#define SPRN_ITV0 0x374 /* Instruction Cache Transient Victim 0 */
+#define SPRN_ITV1 0x375 /* Instruction Cache Transient Victim 1 */
+#define SPRN_ITV2 0x376 /* Instruction Cache Transient Victim 2 */
+#define SPRN_ITV3 0x377 /* Instruction Cache Transient Victim 3 */
+#define SPRN_IVLIM 0x399 /* Instruction Cache Victim Limit */
+#endif
#define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_LR 0x008 /* Link Register */
#define SPRN_MBAR 0x137 /* System memory base address */
#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
+#ifdef CONFIG_BOOKE
+#define SPRN_MMUCR 0x3b2 /* MMU Control Register */
+#endif
#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
#define SPRN_PVR 0x11F /* Processor Version Register */
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_RSTCFG 0x39b /* Reset Configuration */
+#endif
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */
#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */
+
#ifdef CONFIG_BOOKE
#define SPRN_SVR 0x3FF /* System Version Register */
#else
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_405EP 1 /* This is a PPC405 CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_PMC405DE 1 /* ...on a PMC405DE board */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#define CONFIG_BOARD_TYPES 1 /* support board types */
+
+#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+
+#undef CONFIG_BOOTARGS
+#undef CONFIG_BOOTCOMMAND
+
+#define CONFIG_PREBOOT /* enable preboot variable */
+
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change*/
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_PPC4xx_EMAC
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_PHY1_ADDR 2 /* 2nd PHY address */
+
+#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+#define CONFIG_PRAM 0
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
+
+#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console info */
+
+#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x3000000 /* 1 ... 48 MB in DRAM */
+
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
+#define CONFIG_SYS_BASE_BAUD 691200
+#define CONFIG_UART1_CONSOLE
+
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * PCI stuff
+ */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */
+#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+/*
+ * PCI identification
+ */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH
+#define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x040e /* Dev ID: Non-Monarch */
+#define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x040f /* Dev ID: Monarch */
+#define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH PCI_CLASS_PROCESSOR_POWERPC
+#define CONFIG_SYS_PCI_CLASSCODE_MONARCH PCI_CLASS_BRIDGE_HOST
+
+#define CONFIG_SYS_PCI_CLASSCODE CONFIG_SYS_PCI_CLASSCODE_MONARCH
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID CONFIG_SYS_PCI_SUBSYS_ID_MONARCH
+
+#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable=1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to CPLD, GPIO */
+#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable=1 */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+/*
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI 1 /* CFI compatible */
+#define CONFIG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max. no. memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per chip */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* erase timeout (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* write timeout (in ms) */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* buffered writes (faster) */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* 'E' for empty sector (flinfo) */
+#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0xfe000000
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
+
+/*
+ * Environment in EEPROM setup
+ */
+#define CONFIG_ENV_IS_IN_EEPROM 1
+#define CONFIG_ENV_OFFSET 0x100
+#define CONFIG_ENV_SIZE 0x700
+
+/*
+ * I2C EEPROM (24W16) for environment
+ */
+#define CONFIG_HARD_I2C /* I2c with hardware support */
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24W16 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
+ /* 16 byte page write mode using*/
+ /* last 4 bits of the address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_WREN 1
+
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0x40
+#define CONFIG_4xx_CONFIG_BLOCKSIZE 0x20
+
+/*
+ * RTC
+ */
+#define CONFIG_RTC_RX8025
+
+/*
+ * External Bus Controller (EBC) Setup
+ * (max. 55MHZ EBC clock)
+ */
+/* Memory Bank 0 (NOR flash) BAS=0xFE0,BS=32MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP 0x03017200
+#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xba000)
+
+/* Memory Bank 1 (CPLD) BAS=0xEF0,BS=16MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_CPLD_BASE 0xef000000
+#define CONFIG_SYS_EBC_PB1AP 0x00800000
+#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_CPLD_BASE | 0x18000)
+
+/*
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CONFIG_SYS_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
+/* inside SDRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR
+/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes res. for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
+ CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * GPIO Configuration
+ */
+#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alt1 */ \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
+} \
+}
+
+#define CONFIG_SYS_GPIO_HWREV_MASK (0xf0000000 >> 1) /* GPIO1..4 */
+#define CONFIG_SYS_GPIO_HWREV_SHIFT 27
+#define CONFIG_SYS_GPIO_LEDRUN_N (0x80000000 >> 5) /* GPIO5 */
+#define CONFIG_SYS_GPIO_LEDA_N (0x80000000 >> 6) /* GPIO6 */
+#define CONFIG_SYS_GPIO_LEDB_N (0x80000000 >> 7) /* GPIO7 */
+#define CONFIG_SYS_GPIO_SELFRST_N (0x80000000 >> 8) /* GPIO8 */
+#define CONFIG_SYS_GPIO_EEPROM_WP (0x80000000 >> 9) /* GPIO9 */
+#define CONFIG_SYS_GPIO_MONARCH_N (0x80000000 >> 11) /* GPIO11 */
+#define CONFIG_SYS_GPIO_EREADY (0x80000000 >> 12) /* GPIO12 */
+#define CONFIG_SYS_GPIO_M66EN (0x80000000 >> 13) /* GPIO13 */
+
+/*
+ * Default speed selection (cpu_plb_opb_ebc) in mhz.
+ * This value will be set if iic boot eprom is disabled.
+ */
+#undef CONFIG_SYS_FCPU333MHZ
+#define CONFIG_SYS_FCPU266MHZ
+#undef CONFIG_SYS_FCPU133MHZ
+
+#if defined(CONFIG_SYS_FCPU333MHZ)
+/*
+ * CPU: 333MHz
+ * PLB/SDRAM/MAL: 111MHz
+ * OPB: 55MHz
+ * EBC: 55MHz
+ * PCI: 55MHz (111MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_10 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#endif
+
+#if defined(CONFIG_SYS_FCPU266MHZ)
+/*
+ * CPU: 266MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_8 | \
+ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#endif
+
+#if defined(CONFIG_SYS_FCPU133MHZ)
+/*
+ * CPU: 133MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \
+ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \
+ PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_4 | \
+ PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \
+ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#endif
+
+#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * config for XPedite1000 from XES Inc.
+ * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
+ * (C) Copyright 2003 Sandburst Corporation
+ * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_XPEDITE1000 1
+#define CONFIG_SYS_BOARD_NAME "XPedite1000"
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_440 1
+#define CONFIG_440GX 1 /* 440 GX */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+/*
+ * DDR config
+ */
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
+#define CONFIG_VERY_BIG_RAM 1
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
+#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
+#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x0400000
+#define CONFIG_SYS_MEMTEST_END 0x0C00000
+
+/* POST support */
+#define CONFIG_POST (CONFIG_SYS_POST_RTC | \
+ CONFIG_SYS_POST_I2C)
+
+/*
+ * LED support
+ */
+#define USR_LED0 0x00000080
+#define USR_LED1 0x00000100
+#define USR_LED2 0x00000200
+#define USR_LED3 0x00000400
+
+#ifndef __ASSEMBLY__
+extern unsigned long in32(unsigned int);
+extern void out32(unsigned int, unsigned long);
+
+#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
+#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
+#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
+#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
+
+#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
+#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
+#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
+#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
+#endif
+
+/*
+ * Use internal SRAM for initial stack
+ */
+#define CONFIG_SYS_TEMP_STACK_OCM 1
+#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS 3
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 }
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST /* MirrorBit flashes are optional */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7f
+#define CONFIG_I2C_MULTI_BUS
+
+/* I2C EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C RTC: STMicro M41T00 */
+#define CONFIG_RTC_M41T11 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+
+/*
+ * PCI
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */
+
+/*
+ * Networking options
+ */
+#define CONFIG_PPC4xx_EMAC
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_ETHPRIME "ppc_4xx_eth2"
+#define CONFIG_PHY_ADDR 4 /* PHY address phy0 not populated */
+#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */
+#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
+#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */
+#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command configuration
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SNTP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */
+#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_PREBOOT /* enable preboot variable */
+#define CONFIG_FIT 1
+#define CONFIG_FIT_VERBOSE 1
+#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */
+#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */
+#define CONFIG_ENV_SIZE 0x8000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024))
+
+/*
+ * Flash memory map:
+ * fff80000 - ffffffff U-Boot (512 KB)
+ * fff40000 - fff7ffff U-Boot Environment (256 KB)
+ * fff00000 - fff3ffff FDT (256KB)
+ * ffc00000 - ffefffff OS image (3MB)
+ * ff000000 - ffbfffff OS Use/Filesystem (12MB)
+ */
+
+#define CONFIG_UBOOT_ENV_ADDR MK_STR(TEXT_BASE)
+#define CONFIG_FDT_ENV_ADDR MK_STR(0xfff00000)
+#define CONFIG_OS_ENV_ADDR MK_STR(0xffc00000)
+
+#define CONFIG_PROG_UBOOT \
+ "$download_cmd $loadaddr $ubootfile; " \
+ "if test $? -eq 0; then " \
+ "protect off "CONFIG_UBOOT_ENV_ADDR" +80000; " \
+ "erase "CONFIG_UBOOT_ENV_ADDR" +80000; " \
+ "cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; " \
+ "protect on "CONFIG_UBOOT_ENV_ADDR" +80000; " \
+ "cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; " \
+ "if test $? -ne 0; then " \
+ "echo PROGRAM FAILED; " \
+ "else; " \
+ "echo PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_BOOT_OS_NET \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "if test -n $fdtaddr; then " \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "bootm $osaddr - $fdtaddr; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi; " \
+ "else; " \
+ "bootm $osaddr; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_OS \
+ "$download_cmd $osaddr $osfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_OS_ENV_ADDR" +$filesize; " \
+ "cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \
+ "cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo OS PROGRAM FAILED; " \
+ "else; " \
+ "echo OS PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo OS DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_PROG_FDT \
+ "$download_cmd $fdtaddr $fdtfile; " \
+ "if test $? -eq 0; then " \
+ "erase "CONFIG_FDT_ENV_ADDR" +$filesize;" \
+ "cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \
+ "cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \
+ "if test $? -ne 0; then " \
+ "echo FDT PROGRAM FAILED; " \
+ "else; " \
+ "echo FDT PROGRAM SUCCEEDED; " \
+ "fi; " \
+ "else; " \
+ "echo FDT DOWNLOAD FAILED; " \
+ "fi;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "autoload=yes\0" \
+ "download_cmd=tftp\0" \
+ "console_args=console=ttyS0,115200\0" \
+ "root_args=root=/dev/nfs rw\0" \
+ "misc_args=ip=on\0" \
+ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
+ "bootfile=/home/user/file\0" \
+ "osfile=/home/user/uImage-XPedite1000\0" \
+ "fdtfile=/home/user/xpedite1000.dtb\0" \
+ "ubootfile=/home/user/u-boot.bin\0" \
+ "fdtaddr=c00000\0" \
+ "osaddr=0x1000000\0" \
+ "loadaddr=0x1000000\0" \
+ "prog_uboot="CONFIG_PROG_UBOOT"\0" \
+ "prog_os="CONFIG_PROG_OS"\0" \
+ "prog_fdt="CONFIG_PROG_FDT"\0" \
+ "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \
+ "bootcmd_flash=run set_bootargs; " \
+ "bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0" \
+ "bootcmd=run bootcmd_flash\0"
+#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************
- * config for XPedite1000 from XES Inc.
- * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
- * (C) Copyright 2003 Sandburst Corporation
- * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_XPEDITE1K 1 /* Board is XPedite 1000 */
-#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_440 1
-#define CONFIG_440GX 1 /* 440 GX */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-#define CONFIG_MISC_INIT_R
-#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time! */
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
-
-
-/* POST support */
-#define CONFIG_POST (CONFIG_SYS_POST_RTC | \
- CONFIG_SYS_POST_I2C)
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* start of monitor */
-#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
-#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
-#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
-#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
-
-#define USR_LED0 0x00000080
-#define USR_LED1 0x00000100
-#define USR_LED2 0x00000200
-#define USR_LED3 0x00000400
-
-#ifndef __ASSEMBLY__
-extern unsigned long in32(unsigned int);
-extern void out32(unsigned int, unsigned long);
-
-#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
-#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
-#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
-#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
-
-#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
-#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
-#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
-#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
-#endif
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_TEMP_STACK_OCM 1
-#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
-
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-/* TBS: Xpedite 1000 has STMicro M41T00 via IIC */
-#define CONFIG_RTC_M41T11 1
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 2000
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
-#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
-#define CONFIG_VERY_BIG_RAM 1
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7f
-#define CONFIG_SYS_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69} /* Don't probe these addrs */
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_EEPROM 1
-#define CONFIG_ENV_SIZE 0x100 /* Size of Environment vars */
-#define CONFIG_ENV_OFFSET 0x100
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* this is actually the second page of the eeprom */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-#define CONFIG_BOOTARGS "root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
-#define CONFIG_BOOTDELAY 5 /* disable autoboot */
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 0 /* PHY address phy0 not populated */
-#define CONFIG_PHY1_ADDR 1 /* PHY address phy1 not populated */
-#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */
-#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */
-#define CONFIG_NET_MULTI 1
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
-
-#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
-#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
-#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
-#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-#endif /* __CONFIG_H */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
+
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
#define CONFIG_DTT_AD7414 1 /* use AD7414 */
/*
* Commands additional to the ones defined in amcc-common.h
*/
+#define CONFIG_CMD_CHIP_CONFIG
#if defined(CONFIG_ARCHES)
#define CONFIG_CMD_DTT
#define CONFIG_CMD_PCI
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_405EP 1 /* this is a PPC405 CPU */
+#define CONFIG_4xx 1 /* member of PPC4xx family */
+#define CONFIG_DLVISION 1 /* on a Neo board */
+
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#define CONFIG_HOSTNAME dlvision
+#define CONFIG_IDENT_STRING " dlvision 0.01"
+#include "amcc-common.h"
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */
+#define CONFIG_MISC_INIT_R /* call misc_init_r */
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+
+/*
+ * Configure PLL
+ */
+#define PLLMR0_DEFAULT PLLMR0_266_133_66_33
+#define PLLMR1_DEFAULT PLLMR1_266_133_66_33
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_AMCC_DEF_ENV \
+ CONFIG_AMCC_DEF_ENV_POWERPC \
+ CONFIG_AMCC_DEF_ENV_NOR_UPD \
+ "kernel_addr=fc000000\0" \
+ "fdt_addr=fc1e0000\0" \
+ "ramdisk_addr=fc200000\0" \
+ ""
+
+#define CONFIG_PHY_ADDR 4 /* PHY address */
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR 0xc /* EMAC1 PHY address */
+#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ
+
+/*
+ * Commands additional to the ones defined in amcc-common.h
+ */
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_EEPROM
+
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+
+/* SDRAM timings used in datasheet */
+#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */
+#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */
+#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */
+#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
+#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */
+
+/*
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
+ * The Linux BASE_BAUD define should match this configuration.
+ * baseBaud = cpuClock/(uartDivisor*16)
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD 691200
+
+/*
+ * I2C stuff
+ */
+#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address*/
+
+/*
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
+#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CONFIG_SYS_FLASH_BASE 0xFC000000
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */
+#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+#endif
+
+/*
+ * PPC405 GPIO Configuration
+ */
+#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
+{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
+} \
+}
+
+/*
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CONFIG_SYS_TEMP_STACK_OCM 1
+
+/* On Chip Memory location */
+#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
+#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CONFIG_SYS_EBC_PB0AP 0x92015480
+/* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000
+
+/* Memory Bank 1 (NVRAM) initializatio */
+#define CONFIG_SYS_EBC_PB1AP 0x92015480
+/* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB1CR 0xFB858000
+
+/* Memory Bank 2 (UART) initialization */
+#define CONFIG_UART_BASE 0x7f100000
+#define CONFIG_SYS_EBC_PB2AP 0x92015480
+/* BAS=0x7f1,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB2CR 0x7f118000
+
+/* Memory Bank 3 (Latches) initialization */
+#define CONFIG_SYS_LATCH_BASE 0x7f200000
+#define CONFIG_SYS_EBC_PB3AP 0x92015480
+/* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3CR 0x7f21a000
+
+#endif /* __CONFIG_H */
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
/* Standard DTT sensor configuration */
#define CONFIG_DTT_DS1775 1
/*
* Commands additional to the ones defined in amcc-common.h
*/
+#define CONFIG_CMD_CHIP_CONFIG
#define CONFIG_CMD_DATE
#define CONFIG_CMD_LOG
#define CONFIG_CMD_NAND
#define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480 (403) */
#endif
-/*--------------------------------------------------------------------- */
-/* Special Purpose Registers */
-/*--------------------------------------------------------------------- */
- #define srr2 0x3de /* save/restore register 2 */
- #define srr3 0x3df /* save/restore register 3 */
-
- /*
- * 405 does not really have CSRR0/1 but SRR2/3 are used during critical
- * exception for the exact same purposes - let's alias them and have a
- * common handling in crit_return() and CRIT_EXCEPTION
- */
- #define csrr0 srr2
- #define csrr1 srr3
-
- #define dbsr 0x3f0 /* debug status register */
- #define dbcr0 0x3f2 /* debug control register 0 */
- #define dbcr1 0x3bd /* debug control register 1 */
- #define iac1 0x3f4 /* instruction address comparator 1 */
- #define iac2 0x3f5 /* instruction address comparator 2 */
- #define iac3 0x3b4 /* instruction address comparator 3 */
- #define iac4 0x3b5 /* instruction address comparator 4 */
- #define dac1 0x3f6 /* data address comparator 1 */
- #define dac2 0x3f7 /* data address comparator 2 */
- #define dccr 0x3fa /* data cache control register */
- #define iccr 0x3fb /* instruction cache control register */
- #define esr 0x3d4 /* execption syndrome register */
- #define dear 0x3d5 /* data exeption address register */
- #define evpr 0x3d6 /* exeption vector prefix register */
- #define tsr 0x3d8 /* timer status register */
- #define tcr 0x3da /* timer control register */
- #define pit 0x3db /* programmable interval timer */
- #define sgr 0x3b9 /* storage guarded reg */
- #define dcwr 0x3ba /* data cache write-thru reg*/
- #define sler 0x3bb /* storage little-endian reg */
- #define cdbcr 0x3d7 /* cache debug cntrl reg */
- #define icdbdr 0x3d3 /* instr cache dbug data reg*/
- #define ccr0 0x3b3 /* core configuration register */
- #define dvc1 0x3b6 /* data value compare register 1 */
- #define dvc2 0x3b7 /* data value compare register 2 */
- #define pid 0x3b1 /* process ID */
- #define su0r 0x3bc /* storage user-defined register 0 */
- #define zpr 0x3b0 /* zone protection regsiter */
-
- #define tbl 0x11c /* time base lower - privileged write */
- #define tbu 0x11d /* time base upper - privileged write */
-
- #define sprg4r 0x104 /* Special purpose general 4 - read only */
- #define sprg5r 0x105 /* Special purpose general 5 - read only */
- #define sprg6r 0x106 /* Special purpose general 6 - read only */
- #define sprg7r 0x107 /* Special purpose general 7 - read only */
- #define sprg4w 0x114 /* Special purpose general 4 - write only */
- #define sprg5w 0x115 /* Special purpose general 5 - write only */
- #define sprg6w 0x116 /* Special purpose general 6 - write only */
- #define sprg7w 0x117 /* Special purpose general 7 - write only */
-
/******************************************************************************
* Special for PPC405GP
******************************************************************************/
#define CONFIG_SYS_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */
-/*--------------------------------------------------------------------- */
-/* Special Purpose Registers */
-/*--------------------------------------------------------------------- */
-#define xer_reg 0x001
-#define lr_reg 0x008
-#define dec 0x016 /* decrementer */
-#define srr0 0x01a /* save/restore register 0 */
-#define srr1 0x01b /* save/restore register 1 */
-#define pid 0x030 /* process id */
-#define decar 0x036 /* decrementer auto-reload */
-#define csrr0 0x03a /* critical save/restore register 0 */
-#define csrr1 0x03b /* critical save/restore register 1 */
-#define dear 0x03d /* data exception address register */
-#define esr 0x03e /* exception syndrome register */
-#define ivpr 0x03f /* interrupt prefix register */
-#define usprg0 0x100 /* user special purpose register general 0 */
-#define usprg1 0x110 /* user special purpose register general 1 */
-#define tblr 0x10c /* time base lower, read only */
-#define tbur 0x10d /* time base upper, read only */
-#define sprg1 0x111 /* special purpose register general 1 */
-#define sprg2 0x112 /* special purpose register general 2 */
-#define sprg3 0x113 /* special purpose register general 3 */
-#define sprg4 0x114 /* special purpose register general 4 */
-#define sprg5 0x115 /* special purpose register general 5 */
-#define sprg6 0x116 /* special purpose register general 6 */
-#define sprg7 0x117 /* special purpose register general 7 */
-#define tbl 0x11c /* time base lower (supervisor)*/
-#define tbu 0x11d /* time base upper (supervisor)*/
-#define pir 0x11e /* processor id register */
-#define dbsr 0x130 /* debug status register */
-#define dbcr0 0x134 /* debug control register 0 */
-#define dbcr1 0x135 /* debug control register 1 */
-#define dbcr2 0x136 /* debug control register 2 */
-#define iac1 0x138 /* instruction address compare 1 */
-#define iac2 0x139 /* instruction address compare 2 */
-#define iac3 0x13a /* instruction address compare 3 */
-#define iac4 0x13b /* instruction address compare 4 */
-#define dac1 0x13c /* data address compare 1 */
-#define dac2 0x13d /* data address compare 2 */
-#define dvc1 0x13e /* data value compare 1 */
-#define dvc2 0x13f /* data value compare 2 */
-#define tsr 0x150 /* timer status register */
-#define tcr 0x154 /* timer control register */
-#define ivor0 0x190 /* interrupt vector offset register 0 */
-#define ivor1 0x191 /* interrupt vector offset register 1 */
-#define ivor2 0x192 /* interrupt vector offset register 2 */
-#define ivor3 0x193 /* interrupt vector offset register 3 */
-#define ivor4 0x194 /* interrupt vector offset register 4 */
-#define ivor5 0x195 /* interrupt vector offset register 5 */
-#define ivor6 0x196 /* interrupt vector offset register 6 */
-#define ivor7 0x197 /* interrupt vector offset register 7 */
-#define ivor8 0x198 /* interrupt vector offset register 8 */
-#define ivor9 0x199 /* interrupt vector offset register 9 */
-#define ivor10 0x19a /* interrupt vector offset register 10 */
-#define ivor11 0x19b /* interrupt vector offset register 11 */
-#define ivor12 0x19c /* interrupt vector offset register 12 */
-#define ivor13 0x19d /* interrupt vector offset register 13 */
-#define ivor14 0x19e /* interrupt vector offset register 14 */
-#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440)
-#define mcsrr0 0x23a /* machine check save/restore register 0 */
-#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
-#define mcsr 0x23c /* machine check status register */
-#endif
-#define inv0 0x370 /* instruction cache normal victim 0 */
-#define inv1 0x371 /* instruction cache normal victim 1 */
-#define inv2 0x372 /* instruction cache normal victim 2 */
-#define inv3 0x373 /* instruction cache normal victim 3 */
-#define itv0 0x374 /* instruction cache transient victim 0 */
-#define itv1 0x375 /* instruction cache transient victim 1 */
-#define itv2 0x376 /* instruction cache transient victim 2 */
-#define itv3 0x377 /* instruction cache transient victim 3 */
-#define dnv0 0x390 /* data cache normal victim 0 */
-#define dnv1 0x391 /* data cache normal victim 1 */
-#define dnv2 0x392 /* data cache normal victim 2 */
-#define dnv3 0x393 /* data cache normal victim 3 */
-#define dtv0 0x394 /* data cache transient victim 0 */
-#define dtv1 0x395 /* data cache transient victim 1 */
-#define dtv2 0x396 /* data cache transient victim 2 */
-#define dtv3 0x397 /* data cache transient victim 3 */
-#define dvlim 0x398 /* data cache victim limit */
-#define ivlim 0x399 /* instruction cache victim limit */
-#define rstcfg 0x39b /* reset configuration */
-#define dcdbtrl 0x39c /* data cache debug tag register low */
-#define dcdbtrh 0x39d /* data cache debug tag register high */
-#define icdbtrl 0x39e /* instruction cache debug tag register low */
-#define icdbtrh 0x39f /* instruction cache debug tag register high */
-#define mmucr 0x3b2 /* mmu control register */
-#define ccr0 0x3b3 /* core configuration register 0 */
-#define ccr1 0x378 /* core configuration for 440x5 only */
-#define icdbdr 0x3d3 /* instruction cache debug data register */
-#define dbdr 0x3f3 /* debug data register */
-
/******************************************************************************
* DCRs & Related
******************************************************************************/
int fpu_status(void)
{
- if (mfspr(ccr0) & CCR0_DAPUIB)
+ if (mfspr(SPRN_CCR0) & CCR0_DAPUIB)
return 0; /* Disabled */
else
return 1; /* Enabled */
void fpu_disable(void)
{
- mtspr(ccr0, mfspr(ccr0) | CCR0_DAPUIB);
+ mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) | CCR0_DAPUIB);
mtmsr(mfmsr() & ~MSR_FP);
}
void fpu_enable(void)
{
- mtspr(ccr0, mfspr(ccr0) & ~CCR0_DAPUIB);
+ mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) & ~CCR0_DAPUIB);
mtmsr(mfmsr() | MSR_FP);
}
projects / karo-tx-uboot.git / commitdiff