intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
}
+static const struct skl_cdclk_entry {
+ unsigned int freq;
+ unsigned int vco;
+} skl_cdclk_frequencies[] = {
+ { .freq = 308570, .vco = 8640 },
+ { .freq = 337500, .vco = 8100 },
+ { .freq = 432000, .vco = 8640 },
+ { .freq = 450000, .vco = 8100 },
+ { .freq = 540000, .vco = 8100 },
+ { .freq = 617140, .vco = 8640 },
+ { .freq = 675000, .vco = 8100 },
+};
+
+static unsigned int skl_cdclk_decimal(unsigned int freq)
+{
+ return (freq - 1000) / 500;
+}
+
+static unsigned int skl_cdclk_get_vco(unsigned int freq)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(skl_cdclk_frequencies); i++) {
+ const struct skl_cdclk_entry *e = &skl_cdclk_frequencies[i];
+
+ if (e->freq == freq)
+ return e->vco;
+ }
+
+ return 8100;
+}
+
+static void
+skl_dpll0_enable(struct drm_i915_private *dev_priv, unsigned int required_vco)
+{
+ unsigned int min_freq;
+ u32 val;
+
+ /* select the minimum CDCLK before enabling DPLL 0 */
+ val = I915_READ(CDCLK_CTL);
+ val &= ~CDCLK_FREQ_SEL_MASK | ~CDCLK_FREQ_DECIMAL_MASK;
+ val |= CDCLK_FREQ_337_308;
+
+ if (required_vco == 8640)
+ min_freq = 308570;
+ else
+ min_freq = 337500;
+
+ val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_freq);
+
+ I915_WRITE(CDCLK_CTL, val);
+ POSTING_READ(CDCLK_CTL);
+
+ /*
+ * We always enable DPLL0 with the lowest link rate possible, but still
+ * taking into account the VCO required to operate the eDP panel at the
+ * desired frequency. The usual DP link rates operate with a VCO of
+ * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
+ * The modeset code is responsible for the selection of the exact link
+ * rate later on, with the constraint of choosing a frequency that
+ * works with required_vco.
+ */
+ val = I915_READ(DPLL_CTRL1);
+
+ val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
+ DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
+ val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
+ if (required_vco == 8640)
+ val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
+ SKL_DPLL0);
+ else
+ val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
+ SKL_DPLL0);
+
+ I915_WRITE(DPLL_CTRL1, val);
+ POSTING_READ(DPLL_CTRL1);
+
+ I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE);
+
+ if (wait_for(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK, 5))
+ DRM_ERROR("DPLL0 not locked\n");
+}
+
+static bool skl_cdclk_pcu_ready(struct drm_i915_private *dev_priv)
+{
+ int ret;
+ u32 val;
+
+ /* inform PCU we want to change CDCLK */
+ val = SKL_CDCLK_PREPARE_FOR_CHANGE;
+ mutex_lock(&dev_priv->rps.hw_lock);
+ ret = sandybridge_pcode_read(dev_priv, SKL_PCODE_CDCLK_CONTROL, &val);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+
+ return ret == 0 && (val & SKL_CDCLK_READY_FOR_CHANGE);
+}
+
+static bool skl_cdclk_wait_for_pcu_ready(struct drm_i915_private *dev_priv)
+{
+ unsigned int i;
+
+ for (i = 0; i < 15; i++) {
+ if (skl_cdclk_pcu_ready(dev_priv))
+ return true;
+ udelay(10);
+ }
+
+ return false;
+}
+
+static void skl_set_cdclk(struct drm_i915_private *dev_priv, unsigned int freq)
+{
+ u32 freq_select, pcu_ack;
+
+ DRM_DEBUG_DRIVER("Changing CDCLK to %dKHz\n", freq);
+
+ if (!skl_cdclk_wait_for_pcu_ready(dev_priv)) {
+ DRM_ERROR("failed to inform PCU about cdclk change\n");
+ return;
+ }
+
+ /* set CDCLK_CTL */
+ switch(freq) {
+ case 450000:
+ case 432000:
+ freq_select = CDCLK_FREQ_450_432;
+ pcu_ack = 1;
+ break;
+ case 540000:
+ freq_select = CDCLK_FREQ_540;
+ pcu_ack = 2;
+ break;
+ case 308570:
+ case 337500:
+ default:
+ freq_select = CDCLK_FREQ_337_308;
+ pcu_ack = 0;
+ break;
+ case 617140:
+ case 675000:
+ freq_select = CDCLK_FREQ_675_617;
+ pcu_ack = 3;
+ break;
+ }
+
+ I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(freq));
+ POSTING_READ(CDCLK_CTL);
+
+ /* inform PCU of the change */
+ mutex_lock(&dev_priv->rps.hw_lock);
+ sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack);
+ mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
+{
+ /* disable DBUF power */
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
+ DRM_ERROR("DBuf power disable timeout\n");
+
+ /* disable DPLL0 */
+ I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
+ if (wait_for(!(I915_READ(LCPLL1_CTL) & LCPLL_PLL_LOCK), 1))
+ DRM_ERROR("Couldn't disable DPLL0\n");
+
+ intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
+}
+
+void skl_init_cdclk(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+ unsigned int required_vco;
+
+ /* enable PCH reset handshake */
+ val = I915_READ(HSW_NDE_RSTWRN_OPT);
+ I915_WRITE(HSW_NDE_RSTWRN_OPT, val | RESET_PCH_HANDSHAKE_ENABLE);
+
+ /* enable PG1 and Misc I/O */
+ intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
+
+ /* DPLL0 already enabed !? */
+ if (I915_READ(LCPLL1_CTL) & LCPLL_PLL_ENABLE) {
+ DRM_DEBUG_DRIVER("DPLL0 already running\n");
+ return;
+ }
+
+ /* enable DPLL0 */
+ required_vco = skl_cdclk_get_vco(dev_priv->skl_boot_cdclk);
+ skl_dpll0_enable(dev_priv, required_vco);
+
+ /* set CDCLK to the frequency the BIOS chose */
+ skl_set_cdclk(dev_priv, dev_priv->skl_boot_cdclk);
+
+ /* enable DBUF power */
+ I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
+ POSTING_READ(DBUF_CTL);
+
+ udelay(10);
+
+ if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
+ DRM_ERROR("DBuf power enable timeout\n");
+}
+
/* returns HPLL frequency in kHz */
static int valleyview_get_vco(struct drm_i915_private *dev_priv)
{
projects / karo-tx-linux.git / commitdiff