source "arch/arm/Kconfig-nommu"
endif
+config PJ4B_ERRATA_4742
+ bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
+ depends on CPU_PJ4B && MACH_ARMADA_370
+ default y
+ help
+ When coming out of either a Wait for Interrupt (WFI) or a Wait for
+ Event (WFE) IDLE states, a specific timing sensitivity exists between
+ the retiring WFI/WFE instructions and the newly issued subsequent
+ instructions. This sensitivity can result in a CPU hang scenario.
+ Workaround:
+ The software must insert either a Data Synchronization Barrier (DSB)
+ or Data Memory Barrier (DMB) command immediately after the WFI/WFE
+ instruction
+
config ARM_ERRATA_326103
bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
depends on CPU_V6
#define MPIDR_HWID_BITMASK 0xFFFFFF
+#define MPIDR_INVALID (~MPIDR_HWID_BITMASK)
+
#define MPIDR_LEVEL_BITS 8
#define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1)
# endif
#endif
+#ifdef CONFIG_CPU_PJ4B
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_pj4b
+# endif
+#endif
+
#ifndef MULTI_CPU
#define cpu_proc_init __glue(CPU_NAME,_proc_init)
#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
/*
* Logical CPU mapping.
*/
-extern int __cpu_logical_map[];
+extern u32 __cpu_logical_map[];
#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
/*
* Retrieve logical cpu index corresponding to a given MPIDR[23:0]
u32 i, j, cpuidx = 1;
u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
- u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX };
+ u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
bool bootcpu_valid = false;
cpus = of_find_node_by_path("/cpus");
for_each_child_of_node(cpus, cpu) {
u32 hwid;
+ if (of_node_cmp(cpu->type, "cpu"))
+ continue;
+
pr_debug(" * %s...\n", cpu->full_name);
/*
* A device tree containing CPU nodes with missing "reg"
: "r14");
}
-int __cpu_logical_map[NR_CPUS];
+u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
void __init smp_setup_processor_id(void)
{
}
EXPORT_SYMBOL(flush_dcache_page);
+void flush_kernel_dcache_page(struct page *page)
+{
+ __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
+}
+EXPORT_SYMBOL(flush_kernel_dcache_page);
+
void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
unsigned long uaddr, void *dst, const void *src,
unsigned long len)
*/
.align 4
ENTRY(cpu_fa526_do_idle)
- mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr
.endif
.size \name\()_tlb_fns, . - \name\()_tlb_fns
.endm
+
+.macro globl_equ x, y
+ .globl \x
+ .equ \x, \y
+.endm
mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
+#endif
+
+#ifdef CONFIG_CPU_PJ4B
+ globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm
+ globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext
+ globl_equ cpu_pj4b_proc_init, cpu_v7_proc_init
+ globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin
+ globl_equ cpu_pj4b_reset, cpu_v7_reset
+#ifdef CONFIG_PJ4B_ERRATA_4742
+ENTRY(cpu_pj4b_do_idle)
+ dsb @ WFI may enter a low-power mode
+ wfi
+ dsb @barrier
+ mov pc, lr
+ENDPROC(cpu_pj4b_do_idle)
+#else
+ globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle
+#endif
+ globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area
+ globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend
+ globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume
+ globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size
+
#endif
__CPUINIT
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
+#ifdef CONFIG_CPU_PJ4B
+ define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
+#endif
.section ".rodata"
/*
* Standard v7 proc info content
*/
-.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
+.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
HWCAP_EDSP | HWCAP_TLS | \hwcaps
.long cpu_v7_name
- .long v7_processor_functions
+ .long \proc_fns
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
/*
* Marvell PJ4B processor.
*/
+#ifdef CONFIG_CPU_PJ4B
.type __v7_pj4b_proc_info, #object
__v7_pj4b_proc_info:
.long 0x560f5800
.long 0xff0fff00
- __v7_proc __v7_pj4b_setup
+ __v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions
.size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info
+#endif
/*
* ARM Ltd. Cortex A7 processor.
return indirect_read_config(bus, devfn, offset, len, val);
}
-static struct pci_ops fsl_indirect_pci_ops =
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
+
+static struct pci_ops fsl_indirect_pcie_ops =
{
.read = fsl_indirect_read_config,
.write = indirect_write_config,
};
-static void __init fsl_setup_indirect_pci(struct pci_controller* hose,
- resource_size_t cfg_addr,
- resource_size_t cfg_data, u32 flags)
-{
- setup_indirect_pci(hose, cfg_addr, cfg_data, flags);
- hose->ops = &fsl_indirect_pci_ops;
-}
-
-#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
-
#define MAX_PHYS_ADDR_BITS 40
static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
if (!hose->private_data)
goto no_bridge;
- fsl_setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
- PPC_INDIRECT_TYPE_BIG_ENDIAN);
+ setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
+ PPC_INDIRECT_TYPE_BIG_ENDIAN);
if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0)
hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+ /* use fsl_indirect_read_config for PCIe */
+ hose->ops = &fsl_indirect_pcie_ops;
/* For PCIE read HEADER_TYPE to identify controler mode */
early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
if (ret)
goto err0;
} else {
- fsl_setup_indirect_pci(hose, rsrc_cfg.start,
- rsrc_cfg.start + 4, 0);
+ setup_indirect_pci(hose, rsrc_cfg.start,
+ rsrc_cfg.start + 4, 0);
}
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
{
struct dma_map_ops *dma_ops = get_dma_ops(dev);
+ debug_dma_mapping_error(dev, dma_addr);
if (dma_ops->mapping_error)
return dma_ops->mapping_error(dev, dma_addr);
- return (dma_addr == 0UL);
+ return (dma_addr == DMA_ERROR_CODE);
}
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
.write = reipl_fcp_scpdata_write,
};
-DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n",
+DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%llx\n",
reipl_block_fcp->ipl_info.fcp.wwpn);
-DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%016llx\n",
+DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%llx\n",
reipl_block_fcp->ipl_info.fcp.lun);
DEFINE_IPL_ATTR_RW(reipl_fcp, bootprog, "%lld\n", "%lld\n",
reipl_block_fcp->ipl_info.fcp.bootprog);
/* FCP dump device attributes */
-DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%016llx\n",
+DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%llx\n",
dump_block_fcp->ipl_info.fcp.wwpn);
-DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%016llx\n",
+DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%llx\n",
dump_block_fcp->ipl_info.fcp.lun);
DEFINE_IPL_ATTR_RW(dump_fcp, bootprog, "%lld\n", "%lld\n",
dump_block_fcp->ipl_info.fcp.bootprog);
}
EXPORT_SYMBOL(measurement_alert_subclass_unregister);
+#ifdef CONFIG_SMP
void synchronize_irq(unsigned int irq)
{
/*
*/
}
EXPORT_SYMBOL_GPL(synchronize_irq);
+#endif
#ifndef CONFIG_PCI
continue;
} else if ((addr <= chunk->addr) &&
(addr + size >= chunk->addr + chunk->size)) {
- memset(chunk, 0 , sizeof(*chunk));
+ memmove(chunk, chunk + 1, (MEMORY_CHUNKS-i-1) * sizeof(*chunk));
+ memset(&mem_chunk[MEMORY_CHUNKS-1], 0, sizeof(*chunk));
} else if (addr + size < chunk->addr + chunk->size) {
chunk->size = chunk->addr + chunk->size - addr - size;
chunk->addr = addr + size;
return insn.length;
}
-static void __kprobes arch_copy_kprobe(struct kprobe *p)
+static int __kprobes arch_copy_kprobe(struct kprobe *p)
{
+ int ret;
+
/* Copy an instruction with recovering if other optprobe modifies it.*/
- __copy_instruction(p->ainsn.insn, p->addr);
+ ret = __copy_instruction(p->ainsn.insn, p->addr);
+ if (!ret)
+ return -EINVAL;
/*
* __copy_instruction can modify the displacement of the instruction,
/* Also, displacement change doesn't affect the first byte */
p->opcode = p->ainsn.insn[0];
+
+ return 0;
}
int __kprobes arch_prepare_kprobe(struct kprobe *p)
p->ainsn.insn = get_insn_slot();
if (!p->ainsn.insn)
return -ENOMEM;
- arch_copy_kprobe(p);
- return 0;
+
+ return arch_copy_kprobe(p);
}
void __kprobes arch_arm_kprobe(struct kprobe *p)
down_write(&rbd_dev->header_rwsem);
+ ret = rbd_dev_v2_image_size(rbd_dev);
+ if (ret)
+ goto out;
+
if (first_time) {
ret = rbd_dev_v2_header_onetime(rbd_dev);
if (ret)
"is EXPERIMENTAL!");
}
- ret = rbd_dev_v2_image_size(rbd_dev);
- if (ret)
- goto out;
-
if (rbd_dev->spec->snap_id == CEPH_NOSNAP)
if (rbd_dev->mapping.size != rbd_dev->header.image_size)
rbd_dev->mapping.size = rbd_dev->header.image_size;
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
- { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", XTYPE_XBOX360 },
+ { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
config KEYBOARD_OPENCORES
tristate "OpenCores Keyboard Controller"
+ depends on HAS_IOMEM
help
Say Y here if you want to use the OpenCores Keyboard Controller
http://www.opencores.org/project,keyboardcontroller
config SERIO_ALTERA_PS2
tristate "Altera UP PS/2 controller"
+ depends on HAS_IOMEM
help
Say Y here if you have Altera University Program PS/2 ports.
case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */
case 0x160802: /* Cintiq 13HD Pro Pen */
case 0x180802: /* DTH2242 Pen */
+ case 0x100802: /* Intuos4/5 13HD/24HD General Pen */
wacom->tool[idx] = BTN_TOOL_PEN;
break;
case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */
case 0x18080a: /* DTH2242 Eraser */
+ case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */
wacom->tool[idx] = BTN_TOOL_RUBBER;
break;
return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
}
+static int cyttsp_handshake(struct cyttsp *ts)
+{
+ if (ts->pdata->use_hndshk)
+ return ttsp_send_command(ts,
+ ts->xy_data.hst_mode ^ CY_HNDSHK_BIT);
+
+ return 0;
+}
+
static int cyttsp_load_bl_regs(struct cyttsp *ts)
{
memset(&ts->bl_data, 0, sizeof(ts->bl_data));
memcpy(bl_cmd, bl_command, sizeof(bl_command));
if (ts->pdata->bl_keys)
memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS],
- ts->pdata->bl_keys, sizeof(bl_command));
+ ts->pdata->bl_keys, CY_NUM_BL_KEYS);
error = ttsp_write_block_data(ts, CY_REG_BASE,
sizeof(bl_cmd), bl_cmd);
if (error)
return error;
+ error = cyttsp_handshake(ts);
+ if (error)
+ return error;
+
return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0;
}
if (error)
return error;
+ error = cyttsp_handshake(ts);
+ if (error)
+ return error;
+
if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl)
return -EIO;
goto out;
/* provide flow control handshake */
- if (ts->pdata->use_hndshk) {
- error = ttsp_send_command(ts,
- ts->xy_data.hst_mode ^ CY_HNDSHK_BIT);
- if (error)
- goto out;
- }
+ error = cyttsp_handshake(ts);
+ if (error)
+ goto out;
if (unlikely(ts->state == CY_IDLE_STATE))
goto out;
/* TTSP System Information interface definition */
struct cyttsp_sysinfo_data {
u8 hst_mode;
- u8 mfg_cmd;
u8 mfg_stat;
+ u8 mfg_cmd;
u8 cid[3];
u8 tt_undef1;
u8 uid[8];
if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN &&
fcoe->realdev->features & NETIF_F_HW_VLAN_CTAG_TX) {
- skb->vlan_tci = VLAN_TAG_PRESENT |
- vlan_dev_vlan_id(fcoe->netdev);
+ /* must set skb->dev before calling vlan_put_tag */
skb->dev = fcoe->realdev;
+ skb = __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+ vlan_dev_vlan_id(fcoe->netdev));
+ if (!skb)
+ return -ENOMEM;
} else
skb->dev = fcoe->netdev;
int ret;
sg_free_table(sgt);
- ret = sg_alloc_table(sgt, nents, GFP_KERNEL);
+ ret = sg_alloc_table(sgt, nents, GFP_ATOMIC);
if (ret)
return ret;
}
acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
return NULL;
- pdata = devm_kzalloc(&pdev->dev, sizeof(*ssp), GFP_KERNEL);
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev,
"failed to allocate memory for platform data\n");
}
ret = pm_runtime_get_sync(&sdd->pdev->dev);
- if (ret != 0) {
+ if (ret < 0) {
dev_err(dev, "Failed to enable device: %d\n", ret);
goto out_tx;
}
.mode = mode
};
int err;
+ bool lock_inode = !(mode & FALLOC_FL_KEEP_SIZE) ||
+ (mode & FALLOC_FL_PUNCH_HOLE);
if (fc->no_fallocate)
return -EOPNOTSUPP;
- if (mode & FALLOC_FL_PUNCH_HOLE) {
+ if (lock_inode) {
mutex_lock(&inode->i_mutex);
- fuse_set_nowrite(inode);
+ if (mode & FALLOC_FL_PUNCH_HOLE)
+ fuse_set_nowrite(inode);
}
req = fuse_get_req_nopages(fc);
fuse_invalidate_attr(inode);
out:
- if (mode & FALLOC_FL_PUNCH_HOLE) {
- fuse_release_nowrite(inode);
+ if (lock_inode) {
+ if (mode & FALLOC_FL_PUNCH_HOLE)
+ fuse_release_nowrite(inode);
mutex_unlock(&inode->i_mutex);
}
* @in: file to splice from
* @ppos: input file offset
* @out: file to splice to
+ * @opos: output file offset
* @len: number of bytes to splice
* @flags: splice modifier flags
*
list_for_each_entry(iter, &bp_task_head, hw.bp_list) {
if (iter->hw.bp_target == tsk &&
find_slot_idx(iter) == type &&
- cpu == iter->cpu)
+ (iter->cpu < 0 || cpu == iter->cpu))
count += hw_breakpoint_weight(iter);
}
return;
}
- for_each_online_cpu(cpu) {
+ for_each_possible_cpu(cpu) {
unsigned int nr;
nr = per_cpu(nr_cpu_bp_pinned[type], cpu);
if (cpu >= 0) {
toggle_bp_task_slot(bp, cpu, enable, type, weight);
} else {
- for_each_online_cpu(cpu)
+ for_each_possible_cpu(cpu)
toggle_bp_task_slot(bp, cpu, enable, type, weight);
}
projects / karo-tx-linux.git / commitdiff