enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
power_save - Automatic power-saving timeout (in second, 0 =
disable)
- power_save_controller - Support runtime D3 of HD-audio controller
- (-1 = on for supported chip (default), false = off,
- true = force to on even for unsupported hardware)
+ power_save_controller - Reset HD-audio controller in power-saving mode
+ (default = on)
align_buffer_size - Force rounding of buffer/period sizes to multiples
of 128 bytes. This is more efficient in terms of memory
access but isn't required by the HDA spec and prevents
F: drivers/net/ethernet/marvell/sk*
MARVELL LIBERTAS WIRELESS DRIVER
-M: Dan Williams <dcbw@redhat.com>
L: libertas-dev@lists.infradead.org
-S: Maintained
+S: Orphan
F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
F: include/uapi/linux/netdevice.h
NETXEN (1/10) GbE SUPPORT
+M: Manish Chopra <manish.chopra@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: Rajesh Borundia <rajesh.borundia@qlogic.com>
L: netdev@vger.kernel.org
default 8
config IWMMXT
- bool "Enable iWMMXt support"
+ bool "Enable iWMMXt support" if !CPU_PJ4
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
- default y if PXA27x || PXA3xx || ARCH_MMP
+ default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
to deadlock. This workaround puts DSB before executing ISB if
an abort may occur on cache maintenance.
+config ARM_ERRATA_798181
+ bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+ depends on CPU_V7 && SMP
+ help
+ On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+ adequately shooting down all use of the old entries. This
+ option enables the Linux kernel workaround for this erratum
+ which sends an IPI to the CPUs that are running the same ASID
+ as the one being invalidated.
+
endmenu
source "arch/arm/common/Kconfig"
};
mvsdio@d00d4000 {
- pinctrl-0 = <&sdio_pins2>;
+ pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
/*
"mpp50", "mpp51", "mpp52";
marvell,function = "sd0";
};
+
+ sdio_pins3: sdio-pins3 {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp51", "mpp52", "mpp53";
+ marvell,function = "sd0";
+ };
};
gpio0: gpio@d0018100 {
prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
- reg = <0x80157000 0x1000>;
- reg-names = "prcmu";
+ reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+ reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <0 47 0x4>;
#address-cells = <1>;
#size-cells = <1>;
};
nand@3000000 {
+ chip-delay = <40>;
status = "okay";
partition@0 {
compatible = "marvell,orion5x";
interrupt-parent = <&intc>;
+ aliases {
+ gpio0 = &gpio0;
+ };
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <6>, <7>, <8>, <9>;
};
reg = <0x90000 0x10000>,
<0xf2200000 0x800>;
reg-names = "regs", "sram";
- interrupts = <22>;
+ interrupts = <28>;
status = "okay";
};
};
void (*delay)(unsigned long);
void (*const_udelay)(unsigned long);
void (*udelay)(unsigned long);
- bool const_clock;
+ unsigned long ticks_per_jiffy;
} arm_delay_ops;
#define __delay(n) arm_delay_ops.delay(n)
#endif
#endif
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
#ifdef ARCH_NEEDS_KMAP_HIGH_GET
extern void *kmap_high_get(struct page *page);
#else
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
#else /* !CONFIG_CPU_HAS_ASID */
#ifdef CONFIG_MMU
isb();
}
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+ /*
+ * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+ */
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+ dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
/*
* flush_pmd_entry
*
*/
.macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site. Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad #4)
stmdb sp!, {r0-r3, lr}
+ UNWIND(.save {r0-r3, lr})
.endm
.macro mcount_get_lr reg
.endm
ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
#ifdef CONFIG_DYNAMIC_FTRACE
mov ip, lr
ldmia sp!, {lr}
#else
__mcount
#endif
+UNWIND(.fnend)
ENDPROC(__gnu_mcount_nc)
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(ftrace_caller)
+UNWIND(.fnstart)
__ftrace_caller
+UNWIND(.fnend)
ENDPROC(ftrace_caller)
#endif
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
__ftrace_graph_caller
+UNWIND(.fnend)
ENDPROC(ftrace_graph_caller)
#endif
addne r6, r6, #1 << SECTION_SHIFT
strne r6, [r3]
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
sub r4, r4, #4 @ Fixup page table pointer
@ for 64-bit descriptors
#endif
}
if (err) {
- pr_warning("CPU %d debug is powered down!\n", cpu);
+ pr_warn_once("CPU %d debug is powered down!\n", cpu);
cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
return;
}
isb();
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
- pr_warning("CPU %d failed to disable vector catch\n", cpu);
+ pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
return;
}
}
if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
- pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+ pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
return;
}
printk("%s", buf);
}
+static void __init cpuid_init_hwcaps(void)
+{
+ unsigned int divide_instrs;
+
+ if (cpu_architecture() < CPU_ARCH_ARMv7)
+ return;
+
+ divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+ switch (divide_instrs) {
+ case 2:
+ elf_hwcap |= HWCAP_IDIVA;
+ case 1:
+ elf_hwcap |= HWCAP_IDIVT;
+ }
+}
+
static void __init feat_v6_fixup(void)
{
int id = read_cpuid_id();
snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
+
+ cpuid_init_hwcaps();
+
#ifndef CONFIG_ARM_THUMB
- elf_hwcap &= ~HWCAP_THUMB;
+ elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
#endif
feat_v6_fixup();
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
if (bank->start + size < bank->start) {
printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
"32-bit physical address space\n", (long long)start);
if (freq->flags & CPUFREQ_CONST_LOOPS)
return NOTIFY_OK;
- if (arm_delay_ops.const_clock)
- return NOTIFY_OK;
-
if (!per_cpu(l_p_j_ref, cpu)) {
per_cpu(l_p_j_ref, cpu) =
per_cpu(cpu_data, cpu).loops_per_jiffy;
#include <asm/smp_plat.h>
#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
/**********************************************************************/
local_flush_bp_all();
}
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+ unsigned int midr = read_cpuid_id();
+
+ /* Cortex-A15 r0p0..r3p2 affected */
+ if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+ return 0;
+ return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+ return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+ dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+ if (!erratum_a15_798181())
+ return;
+
+ dummy_flush_tlb_a15_erratum();
+ smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+ NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+ int cpu;
+ cpumask_t mask = { CPU_BITS_NONE };
+
+ if (!erratum_a15_798181())
+ return;
+
+ dummy_flush_tlb_a15_erratum();
+ for_each_online_cpu(cpu) {
+ if (cpu == smp_processor_id())
+ continue;
+ /*
+ * We only need to send an IPI if the other CPUs are running
+ * the same ASID as the one being invalidated. There is no
+ * need for locking around the active_asids check since the
+ * switch_mm() function has at least one dmb() (as required by
+ * this workaround) in case a context switch happens on
+ * another CPU after the condition below.
+ */
+ if (atomic64_read(&mm->context.id) ==
+ atomic64_read(&per_cpu(active_asids, cpu)))
+ cpumask_set_cpu(cpu, &mask);
+ }
+ smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
void flush_tlb_all(void)
{
if (tlb_ops_need_broadcast())
on_each_cpu(ipi_flush_tlb_all, NULL, 1);
else
local_flush_tlb_all();
+ broadcast_tlb_a15_erratum();
}
void flush_tlb_mm(struct mm_struct *mm)
on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
else
local_flush_tlb_mm(mm);
+ broadcast_tlb_mm_a15_erratum(mm);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
&ta, 1);
} else
local_flush_tlb_page(vma, uaddr);
+ broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_page(unsigned long kaddr)
on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
} else
local_flush_tlb_kernel_page(kaddr);
+ broadcast_tlb_a15_erratum();
}
void flush_tlb_range(struct vm_area_struct *vma,
&ta, 1);
} else
local_flush_tlb_range(vma, start, end);
+ broadcast_tlb_mm_a15_erratum(vma->vm_mm);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
} else
local_flush_tlb_kernel_range(start, end);
+ broadcast_tlb_a15_erratum();
}
void flush_bp_all(void)
lr, irq, vgic_cpu->vgic_lr[lr]);
BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
- goto out;
+ return true;
}
/* Try to use another LR for this interrupt */
vgic_cpu->vgic_irq_lr_map[irq] = lr;
set_bit(lr, vgic_cpu->lr_used);
-out:
if (!vgic_irq_is_edge(vcpu, irq))
vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
- /*
- * We do not need to take the distributor lock here, since the only
- * action we perform is clearing the irq_active_bit for an EOIed
- * level interrupt. There is a potential race with
- * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
- * check if the interrupt is already active. Two possibilities:
- *
- * - The queuing is occurring on the same vcpu: cannot happen,
- * as we're already in the context of this vcpu, and
- * executing the handler
- * - The interrupt has been migrated to another vcpu, and we
- * ignore this interrupt for this run. Big deal. It is still
- * pending though, and will get considered when this vcpu
- * exits.
- */
if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
/*
* Some level interrupts have been EOIed. Clear their
} else {
vgic_cpu_irq_clear(vcpu, irq);
}
+
+ /*
+ * Despite being EOIed, the LR may not have
+ * been marked as empty.
+ */
+ set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+ vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
}
}
}
/*
- * Sync back the VGIC state after a guest run. We do not really touch
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
- * so there is no need for taking its lock.
+ * Sync back the VGIC state after a guest run. The distributor lock is
+ * needed so we don't get preempted in the middle of the state processing.
*/
static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
{
+ struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
if (!irqchip_in_kernel(vcpu->kvm))
return;
+ spin_lock(&dist->lock);
__kvm_vgic_sync_hwstate(vcpu);
+ spin_unlock(&dist->lock);
}
int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
static void __timer_const_udelay(unsigned long xloops)
{
unsigned long long loops = xloops;
- loops *= loops_per_jiffy;
+ loops *= arm_delay_ops.ticks_per_jiffy;
__timer_delay(loops >> UDELAY_SHIFT);
}
pr_info("Switching to timer-based delay loop\n");
delay_timer = timer;
lpj_fine = timer->freq / HZ;
- loops_per_jiffy = lpj_fine;
+
+ /* cpufreq may scale loops_per_jiffy, so keep a private copy */
+ arm_delay_ops.ticks_per_jiffy = lpj_fine;
arm_delay_ops.delay = __timer_delay;
arm_delay_ops.const_udelay = __timer_const_udelay;
arm_delay_ops.udelay = __timer_udelay;
- arm_delay_ops.const_clock = true;
+
delay_calibrated = true;
} else {
pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
static struct map_desc cns3xxx_io_desc[] __initdata = {
{
- .virtual = CNS3XXX_TC11MP_TWD_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
- .pfn = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
- .length = SZ_4K,
+ .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
+ .pfn = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+ .length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = CNS3XXX_TIMER1_2_3_BASE_VIRT,
#define RTC_INTR_STS_OFFSET 0x34
#define CNS3XXX_MISC_BASE 0x76000000 /* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT 0xFFF07000 /* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT 0xFB000000 /* Misc Control */
#define CNS3XXX_PM_BASE 0x77000000 /* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT 0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT 0xFB001000
#define PM_CLK_GATE_OFFSET 0x00
#define PM_SOFT_RST_OFFSET 0x04
#define PM_PLL_HM_PD_OFFSET 0x1C
#define CNS3XXX_UART0_BASE 0x78000000 /* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT 0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT 0xFB002000
#define CNS3XXX_UART1_BASE 0x78400000 /* UART 1 */
#define CNS3XXX_UART1_BASE_VIRT 0xFFF0A000
#define CNS3XXX_I2S_BASE_VIRT 0xFFF10000
#define CNS3XXX_TIMER1_2_3_BASE 0x7C800000 /* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT 0xFB003000
#define TIMER1_COUNTER_OFFSET 0x00
#define TIMER1_AUTO_RELOAD_OFFSET 0x04
* Testchip peripheral and fpga gic regions
*/
#define CNS3XXX_TC11MP_SCU_BASE 0x90000000 /* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT 0xFB004000
#define CNS3XXX_TC11MP_GIC_CPU_BASE 0x90000100 /* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT 0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
#define CNS3XXX_TC11MP_TWD_BASE 0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT 0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
#define CNS3XXX_TC11MP_GIC_DIST_BASE 0x90001000 /* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT 0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
#define CNS3XXX_TC11MP_L220_BASE 0x92002000 /* L220 registers */
#define CNS3XXX_TC11MP_L220_BASE_VIRT 0xFF002000
static inline void putc(int c)
{
- /* Transmit fifo not full? */
- while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
- ;
+ int i;
+
+ for (i = 0; i < 10000; i++) {
+ /* Transmit fifo not full? */
+ if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+ break;
+ }
__raw_writeb(c, PHYS_UART_DATA);
}
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
extern void v7_cpu_resume(void);
extern u32 *pl310_get_save_ptr(void);
#ifdef CONFIG_SMP
void imx_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
+ /*
+ * We use the cpu jumping argument register to sync with
+ * imx_cpu_kill() which is running on cpu0 and waiting for
+ * the register being cleared to kill the cpu.
+ */
+ imx_set_cpu_arg(cpu, ~0);
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
{
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+ while (imx_get_cpu_arg(cpu) == 0)
+ if (time_after(jiffies, timeout))
+ return 0;
imx_enable_cpu(cpu, false);
+ imx_set_cpu_arg(cpu, 0);
return 1;
}
src_base + SRC_GPR1 + cpu * 8);
}
+u32 imx_get_cpu_arg(int cpu)
+{
+ cpu = cpu_logical_map(cpu);
+ return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+ cpu = cpu_logical_map(cpu);
+ writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
void imx_src_prepare_restart(void)
{
u32 val;
static struct mvsdio_platform_data guruplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
+ .gpio_card_detect = -1,
+ .gpio_write_protect = -1,
};
static struct gpio_led guruplug_led_pins[] = {
static struct mvsdio_platform_data openrd_mvsdio_data = {
.gpio_card_detect = 29, /* MPP29 used as SD card detect */
+ .gpio_write_protect = -1,
};
static unsigned int openrd_mpp_config[] __initdata = {
static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
.gpio_card_detect = 28,
+ .gpio_write_protect = -1,
};
static unsigned int rd88f6281_mpp_config[] __initdata = {
{
u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
- writel_relaxed(0, event_base + TIMER_CLEAR);
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+ writel_relaxed(ctrl, event_base + TIMER_CLEAR);
writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
return 0;
#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28)
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5)
+
#define ACTIVE_DOORBELLS (8)
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
- if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+ if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
else
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
- if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+ if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hwirq, main_int_base +
ARMADA_370_XP_INT_SET_ENABLE_OFFS);
else
writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
irq_set_status_flags(virq, IRQ_LEVEL);
- if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+ if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
irq_set_percpu_devid(virq);
irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
handle_percpu_devid_irq);
};
static struct clk usb_dc_ck = {
- .name = "usb_dc_ck",
- .ops = &clkops_generic,
- /* Direct from ULPD, no parent */
- .rate = 48000000,
- .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
.name = "usb_dc_ck",
.ops = &clkops_generic,
/* Direct from ULPD, no parent */
CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310),
CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX),
- CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX),
+ CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX | CK_7XX),
CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310),
CLK(NULL, "mclk", &mclk_16xx, CK_16XX),
CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310),
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ 960000000
+
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+ OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+ OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
CLK(NULL, "per_mcbsp4_gfclk", &per_mcbsp4_gfclk, CK_443X),
CLK(NULL, "hsmmc1_fclk", &hsmmc1_fclk, CK_443X),
CLK(NULL, "hsmmc2_fclk", &hsmmc2_fclk, CK_443X),
+ CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X),
CLK(NULL, "sha2md5_fck", &sha2md5_fck, CK_443X),
CLK(NULL, "slimbus1_fclk_1", &slimbus1_fclk_1, CK_443X),
CLK(NULL, "slimbus1_fclk_0", &slimbus1_fclk_0, CK_443X),
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+ /*
+ * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+ * domain can transition to retention state when not in use.
+ */
+ rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
return 0;
}
struct omap_hwmod;
extern int omap_dss_reset(struct omap_hwmod *);
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
#include "prm3xxx.h"
#include "prm44xx.h"
+/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
- omap2420_clk_init();
+ omap_clk_init = omap2420_clk_init;
}
void __init omap2420_init_late(void)
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
- omap2430_clk_init();
+ omap_clk_init = omap2430_clk_init;
}
void __init omap2430_init_late(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3430_init_early(void)
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
- omap3xxx_clk_init();
+ omap_clk_init = omap3xxx_clk_init;
}
void __init omap3_init_late(void)
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
- am33xx_clk_init();
+ omap_clk_init = am33xx_clk_init;
}
#endif
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
- omap4xxx_clk_init();
+ omap_clk_init = omap4xxx_clk_init;
}
void __init omap4430_init_late(void)
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
idlemode = HWMOD_IDLEMODE_NO;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
}
if (sf & SYSC_HAS_MIDLEMODE) {
- if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+ if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+ (oh->flags & HWMOD_FORCE_MSTANDBY)) {
idlemode = HWMOD_IDLEMODE_FORCE;
} else {
if (sf & SYSC_HAS_ENAWAKEUP)
*
* HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
* of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- * of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ * out of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
* SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* XXX Should be HWMOD_SETUP_NO_RESET
* correctly, or this is being abused to deal with some PM latency
* issues -- but we're currently suffering from a shortage of
* folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ * is kept in force-standby mode. Failing to do so causes PM problems
+ * with musb on OMAP3630 at least. Note that musb has a dedicated register
+ * to control MSTANDBY signal when MIDLEMODE is set to force-standby.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
#define HWMOD_16BIT_REG (1 << 8)
#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
#define HWMOD_BLOCK_WFI (1 << 10)
+#define HWMOD_FORCE_MSTANDBY (1 << 11)
/*
* omap_hwmod._int_flags definitions
* Erratum ID: i479 idle_req / idle_ack mechanism potentially
* broken when autoidle is enabled
* workaround is to disable the autoidle bit at module level.
+ *
+ * Enabling the device in any other MIDLEMODE setting but force-idle
+ * causes core_pwrdm not enter idle states at least on OMAP3630.
+ * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+ * signal when MIDLEMODE is set to force-idle.
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
+ | HWMOD_FORCE_MSTANDBY,
};
/* usb_otg_hs */
{ }
};
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+ { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
},
},
.dev_attr = ocp2scp_dev_attr,
+ .opt_clks = ocp2scp_usb_phy_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*
clksrc_nr, clksrc_src) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \
clksrc_nr, clksrc_src) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
+ if (omap_clk_init) \
+ omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \
#endif
struct mmci_platform_data mop500_sdi0_data = {
- .ios_handler = mop500_sdi0_ios_handler,
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA |
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/i2c-nomadik.h>
regulator_put(prox_regulator);
}
+void mop500_snowball_ethernet_clock_enable(void)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys("fsmc", NULL);
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+}
+
static struct cryp_platform_data u8500_cryp1_platform_data = {
.mem_to_engine = {
.dir = STEDMA40_MEM_TO_PERIPH,
mop500_audio_init(parent);
mop500_uart_init(parent);
+ mop500_snowball_ethernet_clock_enable();
+
/* This board has full regulator constraints */
regulator_has_full_constraints();
}
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
- else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+ else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
snowball_pinmaps_init();
- else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+ mop500_snowball_ethernet_clock_enable();
+ } else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */
int lockregs;
int i;
- switch (cache_id) {
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
lockregs = 8;
break;
if (cache_id_part_number_from_dt)
cache_id = cache_id_part_number_from_dt;
else
- cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
- & L2X0_CACHE_ID_PART_MASK;
+ cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
aux &= aux_mask;
aux |= aux_val;
/* Determine the number of ways */
- switch (cache_id) {
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
case L2X0_CACHE_ID_PART_L310:
if (aux & (1 << 16))
ways = 16;
.flush_all = l2x0_flush_all,
.inv_all = l2x0_inv_all,
.disable = l2x0_disable,
- .set_debug = pl310_set_debug,
},
};
data->save();
of_init = true;
- l2x0_init(l2x0_base, aux_val, aux_mask);
-
memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+ l2x0_init(l2x0_base, aux_val, aux_mask);
return 0;
}
static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
local_flush_bp_all();
local_flush_tlb_all();
+ dummy_flush_tlb_a15_erratum();
}
atomic64_set(&per_cpu(active_asids, cpu), asid);
} while (pte++, addr += PAGE_SIZE, addr != end);
}
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
- unsigned long end, phys_addr_t phys,
- const struct mem_type *type)
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+ unsigned long end, phys_addr_t phys,
+ const struct mem_type *type)
{
- pmd_t *pmd = pmd_offset(pud, addr);
-
+#ifndef CONFIG_ARM_LPAE
/*
- * Try a section mapping - end, addr and phys must all be aligned
- * to a section boundary. Note that PMDs refer to the individual
- * L1 entries, whereas PGDs refer to a group of L1 entries making
- * up one logical pointer to an L2 table.
+ * In classic MMU format, puds and pmds are folded in to
+ * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+ * group of L1 entries making up one logical pointer to
+ * an L2 table (2MB), where as PMDs refer to the individual
+ * L1 entries (1MB). Hence increment to get the correct
+ * offset for odd 1MB sections.
+ * (See arch/arm/include/asm/pgtable-2level.h)
*/
- if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
- pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
- if (addr & SECTION_SIZE)
- pmd++;
+ if (addr & SECTION_SIZE)
+ pmd++;
#endif
+ do {
+ *pmd = __pmd(phys | type->prot_sect);
+ phys += SECTION_SIZE;
+ } while (pmd++, addr += SECTION_SIZE, addr != end);
- do {
- *pmd = __pmd(phys | type->prot_sect);
- phys += SECTION_SIZE;
- } while (pmd++, addr += SECTION_SIZE, addr != end);
+ flush_pmd_entry(pmd);
+}
- flush_pmd_entry(p);
- } else {
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
+ unsigned long end, phys_addr_t phys,
+ const struct mem_type *type)
+{
+ pmd_t *pmd = pmd_offset(pud, addr);
+ unsigned long next;
+
+ do {
/*
- * No need to loop; pte's aren't interested in the
- * individual L1 entries.
+ * With LPAE, we must loop over to map
+ * all the pmds for the given range.
*/
- alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
- }
+ next = pmd_addr_end(addr, end);
+
+ /*
+ * Try a section mapping - addr, next and phys must all be
+ * aligned to a section boundary.
+ */
+ if (type->prot_sect &&
+ ((addr | next | phys) & ~SECTION_MASK) == 0) {
+ map_init_section(pmd, addr, next, phys, type);
+ } else {
+ alloc_init_pte(pmd, addr, next,
+ __phys_to_pfn(phys), type);
+ }
+
+ phys += next - addr;
+
+ } while (pmd++, addr = next, addr != end);
}
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
do {
next = pud_addr_end(addr, end);
- alloc_init_section(pud, addr, next, phys, type);
+ alloc_init_pmd(pud, addr, next, phys, type);
phys += next - addr;
} while (pud++, addr = next, addr != end);
}
__v7_ca7mp_proc_info:
.long 0x410fc070
.long 0xff0ffff0
- __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+ __v7_proc __v7_ca7mp_setup
.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
/*
__v7_ca15mp_proc_info:
.long 0x410fc0f0
.long 0xff0ffff0
- __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+ __v7_proc __v7_ca15mp_setup
.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
+ /*
+ * Qualcomm Inc. Krait processors.
+ */
+ .type __krait_proc_info, #object
+__krait_proc_info:
+ .long 0x510f0400 @ Required ID value
+ .long 0xff0ffc00 @ Mask for ID
+ /*
+ * Some Krait processors don't indicate support for SDIV and UDIV
+ * instructions in the ARM instruction set, even though they actually
+ * do support them.
+ */
+ __v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+ .size __krait_proc_info, . - __krait_proc_info
+
/*
* Match any ARMv7 processor core.
*/
select HAVE_KRETPROBES
select HAVE_DEBUG_KMEMLEAK
select ARCH_BINFMT_ELF_RANDOMIZE_PIE
- select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
select RTC_LIB if !MACH_LOONGSON
select GENERIC_ATOMIC64 if !64BIT
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
- select CPU_HAS_LLSC
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH
strcpy(cfe_version, "unknown");
printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
- if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
- printk(KERN_ERR PFX "invalid nvram checksum\n");
- return;
- }
+ bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
board_name = bcm63xx_nvram_get_name();
/* find board by name */
static struct bcm963xx_nvram nvram;
static int mac_addr_used;
-int __init bcm63xx_nvram_init(void *addr)
+void __init bcm63xx_nvram_init(void *addr)
{
unsigned int check_len;
u32 crc, expected_crc;
crc = crc32_le(~0, (u8 *)&nvram, check_len);
if (crc != expected_crc)
- return -EINVAL;
-
- return 0;
+ pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+ expected_crc, crc);
}
u8 *bcm63xx_nvram_get_name(void)
return board_register_devices();
}
-device_initcall(bcm63xx_register_devices);
+arch_initcall(bcm63xx_register_devices);
*
* Initialized the local nvram copy from the target address and checks
* its checksum.
- *
- * Returns 0 on success.
*/
-int __init bcm63xx_nvram_init(void *nvram);
+void bcm63xx_nvram_init(void *nvram);
/**
* bcm63xx_nvram_get_name() - returns the board name according to nvram
/* #define cpu_has_prefetch ? */
#define cpu_has_mcheck 1
/* #define cpu_has_ejtag ? */
-#ifdef CONFIG_CPU_HAS_LLSC
#define cpu_has_llsc 1
-#else
-#define cpu_has_llsc 0
-#endif
/* #define cpu_has_vtag_icache ? */
/* #define cpu_has_dc_aliases ? */
/* #define cpu_has_ic_fills_f_dc ? */
unsigned int __dspctl; \
\
__asm__ __volatile__( \
+ " .set push \n" \
+ " .set dsp \n" \
" rddsp %0, %x1 \n" \
+ " .set pop \n" \
: "=r" (__dspctl) \
: "i" (mask)); \
__dspctl; \
#define wrdsp(val, mask) \
do { \
__asm__ __volatile__( \
+ " .set push \n" \
+ " .set dsp \n" \
" wrdsp %0, %x1 \n" \
+ " .set pop \n" \
: \
: "r" (val), "i" (mask)); \
} while (0)
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
-
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
-
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
-
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+#define mflo0() \
+({ \
+ long mflo0; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac0 \n" \
+ " .set pop \n" \
+ : "=r" (mflo0)); \
+ mflo0; \
+})
+
+#define mflo1() \
+({ \
+ long mflo1; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac1 \n" \
+ " .set pop \n" \
+ : "=r" (mflo1)); \
+ mflo1; \
+})
+
+#define mflo2() \
+({ \
+ long mflo2; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac2 \n" \
+ " .set pop \n" \
+ : "=r" (mflo2)); \
+ mflo2; \
+})
+
+#define mflo3() \
+({ \
+ long mflo3; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mflo %0, $ac3 \n" \
+ " .set pop \n" \
+ : "=r" (mflo3)); \
+ mflo3; \
+})
+
+#define mfhi0() \
+({ \
+ long mfhi0; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac0 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi0)); \
+ mfhi0; \
+})
+
+#define mfhi1() \
+({ \
+ long mfhi1; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac1 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi1)); \
+ mfhi1; \
+})
+
+#define mfhi2() \
+({ \
+ long mfhi2; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac2 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi2)); \
+ mfhi2; \
+})
+
+#define mfhi3() \
+({ \
+ long mfhi3; \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mfhi %0, $ac3 \n" \
+ " .set pop \n" \
+ : "=r" (mfhi3)); \
+ mfhi3; \
+})
+
+
+#define mtlo0(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac0 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo1(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac1 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo2(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac2 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mtlo3(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mtlo %0, $ac3 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi0(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac0 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi1(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac1 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi2(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac2 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
+
+#define mthi3(x) \
+({ \
+ __asm__( \
+ " .set push \n" \
+ " .set dsp \n" \
+ " mthi %0, $ac3 \n" \
+ " .set pop \n" \
+ : \
+ : "r" (x)); \
+})
#else
#include <asm/sigcontext.h>
#include <asm/siginfo.h>
-#define __ARCH_HAS_ODD_SIGACTION
+#define __ARCH_HAS_IRIX_SIGACTION
#endif /* _ASM_SIGNAL_H */
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
#
-# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
-# to enable DSP assembler support here even if the MIPS Release 2 CPU we
-# are targetting does not support DSP because all code-paths making use of
-# it properly check that the running CPU *actually does* support these
-# instructions.
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
+# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
+# here because the compiler may use DSP ASE instructions (such as lwx) in
+# code paths where we cannot check that the CPU we are running on supports it.
+# Proper abstraction using HAVE_AS_DSP and macros is done in
+# arch/mips/include/asm/mipsregs.h.
#
ifeq ($(CONFIG_CPU_MIPSR2), y)
CFLAGS_DSP = -DHAVE_AS_DSP
-#
-# Check if assembler supports DSP ASE
-#
-ifeq ($(call cc-option-yn,-mdsp), y)
-CFLAGS_DSP += -mdsp
-endif
-
-#
-# Check if assembler supports DSP ASE Rev2
-#
-ifeq ($(call cc-option-yn,-mdspr2), y)
-CFLAGS_DSP += -mdspr2
-endif
-
CFLAGS_signal.o = $(CFLAGS_DSP)
CFLAGS_signal32.o = $(CFLAGS_DSP)
CFLAGS_process.o = $(CFLAGS_DSP)
c->tlbsize = 48;
break;
case PRID_IMP_VR41XX:
+ set_isa(c, MIPS_CPU_ISA_III);
+ c->options = R4K_OPTS;
+ c->tlbsize = 32;
switch (c->processor_id & 0xf0) {
case PRID_REV_VR4111:
c->cputype = CPU_VR4111;
__cpu_name[cpu] = "NEC VR4131";
} else {
c->cputype = CPU_VR4133;
+ c->options |= MIPS_CPU_LLSC;
__cpu_name[cpu] = "NEC VR4133";
}
break;
__cpu_name[cpu] = "NEC Vr41xx";
break;
}
- set_isa(c, MIPS_CPU_ISA_III);
- c->options = R4K_OPTS;
- c->tlbsize = 32;
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
err = compat_sys_shmctl(first, second, compat_ptr(ptr));
break;
default:
- err = -EINVAL;
+ err = -ENOSYS;
break;
}
if (cpu_has_mips_r) {
seq_printf(m, "isa\t\t\t:");
if (cpu_has_mips_1)
- seq_printf(m, "%s", "mips1");
+ seq_printf(m, "%s", " mips1");
if (cpu_has_mips_2)
seq_printf(m, "%s", " mips2");
if (cpu_has_mips_3)
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a |= mask;
raw_local_irq_restore(flags);
return res;
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a |= mask;
raw_local_irq_restore(flags);
return res;
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a &= ~mask;
raw_local_irq_restore(flags);
return res;
unsigned bit = nr & SZLONG_MASK;
unsigned long mask;
unsigned long flags;
- unsigned long res;
+ int res;
a += nr >> SZLONG_LOG;
mask = 1UL << bit;
raw_local_irq_save(flags);
- res = (mask & *a);
+ res = (mask & *a) != 0;
*a ^= mask;
raw_local_irq_restore(flags);
return res;
#endif
/* odd buffer alignment? */
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
wsbh v1, sum
movn sum, v1, t7
#else
addu sum, v1
#endif
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
wsbh v1, sum
movn sum, v1, odd
#else
#define _REGION3_ENTRY_CO 0x100 /* change-recording override */
/* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN_LARGE ~0xfffffUL /* large page address */
#define _SEGMENT_ENTRY_ORIGIN ~0x7ffUL/* segment table origin */
#define _SEGMENT_ENTRY_RO 0x200 /* page protection bit */
#define _SEGMENT_ENTRY_INV 0x20 /* invalid segment table entry */
/*
* No page table caches to initialise
*/
-#define pgtable_cache_init() do { } while (0)
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
#include <asm-generic/pgtable.h>
* >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address
* contains the (negative) exception code.
*/
-static __always_inline unsigned long follow_table(struct mm_struct *mm,
- unsigned long addr, int write)
+#ifdef CONFIG_64BIT
+static unsigned long follow_table(struct mm_struct *mm,
+ unsigned long address, int write)
{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- pte_t *ptep;
+ unsigned long *table = (unsigned long *)__pa(mm->pgd);
+
+ switch (mm->context.asce_bits & _ASCE_TYPE_MASK) {
+ case _ASCE_TYPE_REGION1:
+ table = table + ((address >> 53) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x39UL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_REGION2:
+ table = table + ((address >> 42) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x3aUL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_REGION3:
+ table = table + ((address >> 31) & 0x7ff);
+ if (unlikely(*table & _REGION_ENTRY_INV))
+ return -0x3bUL;
+ table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+ case _ASCE_TYPE_SEGMENT:
+ table = table + ((address >> 20) & 0x7ff);
+ if (unlikely(*table & _SEGMENT_ENTRY_INV))
+ return -0x10UL;
+ if (unlikely(*table & _SEGMENT_ENTRY_LARGE)) {
+ if (write && (*table & _SEGMENT_ENTRY_RO))
+ return -0x04UL;
+ return (*table & _SEGMENT_ENTRY_ORIGIN_LARGE) +
+ (address & ~_SEGMENT_ENTRY_ORIGIN_LARGE);
+ }
+ table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+ }
+ table = table + ((address >> 12) & 0xff);
+ if (unlikely(*table & _PAGE_INVALID))
+ return -0x11UL;
+ if (write && (*table & _PAGE_RO))
+ return -0x04UL;
+ return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
+}
- pgd = pgd_offset(mm, addr);
- if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
- return -0x3aUL;
+#else /* CONFIG_64BIT */
- pud = pud_offset(pgd, addr);
- if (pud_none(*pud) || unlikely(pud_bad(*pud)))
- return -0x3bUL;
+static unsigned long follow_table(struct mm_struct *mm,
+ unsigned long address, int write)
+{
+ unsigned long *table = (unsigned long *)__pa(mm->pgd);
- pmd = pmd_offset(pud, addr);
- if (pmd_none(*pmd))
+ table = table + ((address >> 20) & 0x7ff);
+ if (unlikely(*table & _SEGMENT_ENTRY_INV))
return -0x10UL;
- if (pmd_large(*pmd)) {
- if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
- return -0x04UL;
- return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
- }
- if (unlikely(pmd_bad(*pmd)))
- return -0x10UL;
-
- ptep = pte_offset_map(pmd, addr);
- if (!pte_present(*ptep))
+ table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN);
+ table = table + ((address >> 12) & 0xff);
+ if (unlikely(*table & _PAGE_INVALID))
return -0x11UL;
- if (write && (!pte_write(*ptep) || !pte_dirty(*ptep)))
+ if (write && (*table & _PAGE_RO))
return -0x04UL;
-
- return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK);
+ return (*table & PAGE_MASK) + (address & ~PAGE_MASK);
}
+#endif /* CONFIG_64BIT */
+
static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
size_t n, int write_user)
{
static size_t clear_user_pt(size_t n, void __user *to)
{
- void *zpage = &empty_zero_page;
+ void *zpage = (void *) empty_zero_page;
long done, size, ret;
done = 0;
#ifdef CONFIG_BLK_DEV_INITRD
-/*
- * Note that the kernel can potentially support other compression
- * techniques than gz, though we don't do so by default. If we ever
- * decide to do so we can either look for other filename extensions,
- * or just allow a file with this name to be compressed with an
- * arbitrary compressor (somewhat counterintuitively).
- */
static int __initdata set_initramfs_file;
-static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+static char __initdata initramfs_file[128] = "initramfs";
static int __init setup_initramfs_file(char *str)
{
early_param("initramfs_file", setup_initramfs_file);
/*
- * We look for an "initramfs.cpio.gz" file in the hvfs.
- * If there is one, we allocate some memory for it and it will be
- * unpacked to the initramfs.
+ * We look for a file called "initramfs" in the hvfs. If there is one, we
+ * allocate some memory for it and it will be unpacked to the initramfs.
+ * If it's compressed, the initd code will uncompress it first.
*/
static void __init load_hv_initrd(void)
{
fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
if (fd == HV_ENOENT) {
- if (set_initramfs_file)
+ if (set_initramfs_file) {
pr_warning("No such hvfs initramfs file '%s'\n",
initramfs_file);
- return;
+ return;
+ } else {
+ /* Try old backwards-compatible name. */
+ fd = hv_fs_findfile((HV_VirtAddr)"initramfs.cpio.gz");
+ if (fd == HV_ENOENT)
+ return;
+ }
}
BUG_ON(fd < 0);
stat = hv_fs_fstat(fd);
config ACPI_BGRT
bool "Boottime Graphics Resource Table support"
- depends on EFI
+ depends on EFI && X86
help
This driver adds support for exposing the ACPI Boottime Graphics
Resource Table, which allows the operating system to obtain
acpi_handle handle;
acpi_status status;
- handle = ACPI_HANDLE(&adapter->dev);
+ handle = ACPI_HANDLE(adapter->dev.parent);
if (!handle)
return;
static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
-static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX];
+static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX],
+ acpi_cstate);
static int disabled_by_idle_boot_param(void)
{
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
*/
static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
{
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
ACPI_FLUSH_CPU_CACHE();
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
continue;
#endif
- acpi_cstate[count] = cx;
+ per_cpu(acpi_cstate[count], dev->cpu) = cx;
count++;
if (count == CPUIDLE_STATE_MAX)
#include "power.h"
static DEFINE_MUTEX(dev_pm_qos_mtx);
+static DEFINE_MUTEX(dev_pm_qos_sysfs_mtx);
static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
struct pm_qos_constraints *c;
struct pm_qos_flags *f;
- mutex_lock(&dev_pm_qos_mtx);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
/*
* If the device's PM QoS resume latency limit or PM QoS flags have been
* exposed to user space, they have to be hidden at this point.
*/
+ pm_qos_sysfs_remove_latency(dev);
+ pm_qos_sysfs_remove_flags(dev);
+
+ mutex_lock(&dev_pm_qos_mtx);
+
__dev_pm_qos_hide_latency_limit(dev);
__dev_pm_qos_hide_flags(dev);
out:
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
/**
kfree(req);
}
+static void dev_pm_qos_drop_user_request(struct device *dev,
+ enum dev_pm_qos_req_type type)
+{
+ mutex_lock(&dev_pm_qos_mtx);
+ __dev_pm_qos_drop_user_request(dev, type);
+ mutex_unlock(&dev_pm_qos_mtx);
+}
+
/**
* dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space.
* @dev: Device whose PM QoS latency limit is to be exposed to user space.
return ret;
}
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->latency_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_latency(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
static void __dev_pm_qos_hide_latency_limit(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req) {
- pm_qos_sysfs_remove_latency(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
- }
}
/**
*/
void dev_pm_qos_hide_latency_limit(struct device *dev)
{
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_latency(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_latency_limit(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
}
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->flags_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_flags(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
return ret;
}
static void __dev_pm_qos_hide_flags(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req) {
- pm_qos_sysfs_remove_flags(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
- }
}
/**
void dev_pm_qos_hide_flags(struct device *dev)
{
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_flags(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_flags(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
base = 0;
if (max < rbnode->base_reg + rbnode->blklen)
- end = rbnode->base_reg + rbnode->blklen - max;
+ end = max - rbnode->base_reg + 1;
else
end = rbnode->blklen;
}
}
+ regmap_debugfs_init(map, config->name);
+
ret = regcache_init(map, config);
if (ret != 0)
goto err_range;
- regmap_debugfs_init(map, config->name);
-
/* Add a devres resource for dev_get_regmap() */
m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
if (!m) {
unsigned int ival;
int val_bytes = map->format.val_bytes;
for (i = 0; i < val_len / val_bytes; i++) {
- memcpy(map->work_buf, val + (i * val_bytes), val_bytes);
- ival = map->format.parse_val(map->work_buf);
+ ival = map->format.parse_val(val + (i * val_bytes));
ret = regcache_write(map, reg + (i * map->reg_stride),
ival);
if (ret) {
kfree(async->work_buf);
kfree(async);
}
+
+ return ret;
}
trace_regmap_hw_write_start(map->dev, reg,
{
struct sk_buff *skb;
- skb = alloc_skb(len, GFP_ATOMIC);
+ skb = alloc_skb(len + MAX_HEADER, GFP_ATOMIC);
if (skb) {
+ skb_reserve(skb, MAX_HEADER);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb->protocol = __constant_htons(ETH_P_AOE);
lo->lo_flags |= LO_FLAGS_PARTSCAN;
if (lo->lo_flags & LO_FLAGS_PARTSCAN)
ioctl_by_bdev(bdev, BLKRRPART, 0);
+
+ /* Grab the block_device to prevent its destruction after we
+ * put /dev/loopXX inode. Later in loop_clr_fd() we bdput(bdev).
+ */
+ bdgrab(bdev);
return 0;
out_clr:
memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
memset(lo->lo_file_name, 0, LO_NAME_SIZE);
- if (bdev)
+ if (bdev) {
+ bdput(bdev);
invalidate_bdev(bdev);
+ }
set_capacity(lo->lo_disk, 0);
loop_sysfs_exit(lo);
if (bdev) {
}
EXPORT_SYMBOL_GPL(hwrng_unregister);
+static void __exit hwrng_exit(void)
+{
+ mutex_lock(&rng_mutex);
+ BUG_ON(current_rng);
+ kfree(rng_buffer);
+ mutex_unlock(&rng_mutex);
+}
+
+module_exit(hwrng_exit);
MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver");
MODULE_LICENSE("GPL");
spinlock_t ports_lock;
/* To protect the vq operations for the control channel */
- spinlock_t cvq_lock;
+ spinlock_t c_ivq_lock;
+ spinlock_t c_ovq_lock;
/* The current config space is stored here */
struct virtio_console_config config;
vq = portdev->c_ovq;
sg_init_one(sg, &cpkt, sizeof(cpkt));
+
+ spin_lock(&portdev->c_ovq_lock);
if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) == 0) {
virtqueue_kick(vq);
while (!virtqueue_get_buf(vq, &len))
cpu_relax();
}
+ spin_unlock(&portdev->c_ovq_lock);
return 0;
}
* rproc_serial does not want the console port, only
* the generic port implementation.
*/
- port->host_connected = port->guest_connected = true;
+ port->host_connected = true;
else if (!use_multiport(port->portdev)) {
/*
* If we're not using multiport support,
portdev = container_of(work, struct ports_device, control_work);
vq = portdev->c_ivq;
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
while ((buf = virtqueue_get_buf(vq, &len))) {
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
buf->len = len;
buf->offset = 0;
handle_control_message(portdev, buf);
- spin_lock(&portdev->cvq_lock);
+ spin_lock(&portdev->c_ivq_lock);
if (add_inbuf(portdev->c_ivq, buf) < 0) {
dev_warn(&portdev->vdev->dev,
"Error adding buffer to queue\n");
free_buf(buf, false);
}
}
- spin_unlock(&portdev->cvq_lock);
+ spin_unlock(&portdev->c_ivq_lock);
}
static void out_intr(struct virtqueue *vq)
port->inbuf = get_inbuf(port);
/*
- * Don't queue up data when port is closed. This condition
+ * Normally the port should not accept data when the port is
+ * closed. For generic serial ports, the host won't (shouldn't)
+ * send data till the guest is connected. But this condition
* can be reached when a console port is not yet connected (no
- * tty is spawned) and the host sends out data to console
- * ports. For generic serial ports, the host won't
- * (shouldn't) send data till the guest is connected.
+ * tty is spawned) and the other side sends out data over the
+ * vring, or when a remote devices start sending data before
+ * the ports are opened.
+ *
+ * A generic serial port will discard data if not connected,
+ * while console ports and rproc-serial ports accepts data at
+ * any time. rproc-serial is initiated with guest_connected to
+ * false because port_fops_open expects this. Console ports are
+ * hooked up with an HVC console and is initialized with
+ * guest_connected to true.
*/
- if (!port->guest_connected)
+
+ if (!port->guest_connected && !is_rproc_serial(port->portdev->vdev))
discard_port_data(port);
spin_unlock_irqrestore(&port->inbuf_lock, flags);
if (multiport) {
unsigned int nr_added_bufs;
- spin_lock_init(&portdev->cvq_lock);
+ spin_lock_init(&portdev->c_ivq_lock);
+ spin_lock_init(&portdev->c_ovq_lock);
INIT_WORK(&portdev->control_work, &control_work_handler);
- nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ nr_added_bufs = fill_queue(portdev->c_ivq,
+ &portdev->c_ivq_lock);
if (!nr_added_bufs) {
dev_err(&vdev->dev,
"Error allocating buffers for control queue\n");
return ret;
if (use_multiport(portdev))
- fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+ fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);
list_for_each_entry(port, &portdev->ports, list) {
port->in_vq = portdev->in_vqs[port->id];
clks[pll_a_out0] = clk;
/* PLLE */
- clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, NULL,
+ clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, pmc_base,
0, 100000000, &pll_e_params,
0, pll_e_freq_table, NULL);
clk_register_clkdev(clk, "pll_e", NULL);
static int cpu0_cpufreq_probe(struct platform_device *pdev)
{
- struct device_node *np;
+ struct device_node *np, *parent;
int ret;
- for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ parent = of_find_node_by_path("/cpus");
+ if (!parent) {
+ pr_err("failed to find OF /cpus\n");
+ return -ENOENT;
+ }
+
+ for_each_child_of_node(parent, np) {
if (of_get_property(np, "operating-points", NULL))
break;
}
* published by the Free Software Foundation.
*/
-#ifndef _CPUFREQ_GOVERNER_H
-#define _CPUFREQ_GOVERNER_H
+#ifndef _CPUFREQ_GOVERNOR_H
+#define _CPUFREQ_GOVERNOR_H
#include <linux/cpufreq.h>
#include <linux/kobject.h>
unsigned int sampling_rate);
int cpufreq_governor_dbs(struct dbs_data *dbs_data,
struct cpufreq_policy *policy, unsigned int event);
-#endif /* _CPUFREQ_GOVERNER_H */
+#endif /* _CPUFREQ_GOVERNOR_H */
config DW_DMAC
tristate "Synopsys DesignWare AHB DMA support"
+ depends on GENERIC_HARDIRQS
select DMA_ENGINE
default y if CPU_AT32AP7000
help
* If it can't be trusted, assume that the pin can be used as a GPIO.
*/
if (ichx_priv.desc->use_sel_ignore[nr / 32] & (1 << (nr & 0x1f)))
- return 1;
+ return 0;
return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
}
.xlate = irq_domain_xlate_twocell,
};
-static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio,
+ struct device_node *np)
{
- int base = stmpe_gpio->irq_base;
+ int base = 0;
- stmpe_gpio->domain = irq_domain_add_simple(NULL,
+ if (!np)
+ base = stmpe_gpio->irq_base;
+
+ stmpe_gpio->domain = irq_domain_add_simple(np,
stmpe_gpio->chip.ngpio, base,
&stmpe_gpio_irq_simple_ops, stmpe_gpio);
if (!stmpe_gpio->domain) {
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.dev = &pdev->dev;
+#ifdef CONFIG_OF
+ stmpe_gpio->chip.of_node = np;
+#endif
stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
if (pdata)
goto out_free;
if (irq >= 0) {
- ret = stmpe_gpio_irq_init(stmpe_gpio);
+ ret = stmpe_gpio_irq_init(stmpe_gpio, np);
if (ret)
goto out_disable;
fb = dev->mode_config.funcs->fb_create(dev, file_priv, &r);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("could not create framebuffer\n");
- drm_modeset_unlock_all(dev);
return PTR_ERR(fb);
}
fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("could not create framebuffer\n");
- drm_modeset_unlock_all(dev);
return PTR_ERR(fb);
}
int retcode = 0;
int need_setup = 0;
struct address_space *old_mapping;
+ struct address_space *old_imapping;
minor = idr_find(&drm_minors_idr, minor_id);
if (!minor)
if (!dev->open_count++)
need_setup = 1;
mutex_lock(&dev->struct_mutex);
+ old_imapping = inode->i_mapping;
old_mapping = dev->dev_mapping;
if (old_mapping == NULL)
dev->dev_mapping = &inode->i_data;
err_undo:
mutex_lock(&dev->struct_mutex);
- filp->f_mapping = old_mapping;
- inode->i_mapping = old_mapping;
+ filp->f_mapping = old_imapping;
+ inode->i_mapping = old_imapping;
iput(container_of(dev->dev_mapping, struct inode, i_data));
dev->dev_mapping = old_mapping;
mutex_unlock(&dev->struct_mutex);
if (eb == NULL) {
int size = args->buffer_count;
int count = PAGE_SIZE / sizeof(struct hlist_head) / 2;
- BUILD_BUG_ON(!is_power_of_2(PAGE_SIZE / sizeof(struct hlist_head)));
+ BUILD_BUG_ON_NOT_POWER_OF_2(PAGE_SIZE / sizeof(struct hlist_head));
while (count > 2*size)
count >>= 1;
eb = kzalloc(count*sizeof(struct hlist_head) +
struct intel_crt {
struct intel_encoder base;
+ /* DPMS state is stored in the connector, which we need in the
+ * encoder's enable/disable callbacks */
+ struct intel_connector *connector;
bool force_hotplug_required;
u32 adpa_reg;
};
return true;
}
-static void intel_disable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
- temp &= ~ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
-static void intel_enable_crt(struct intel_encoder *encoder)
-{
- struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
- struct intel_crt *crt = intel_encoder_to_crt(encoder);
- u32 temp;
-
- temp = I915_READ(crt->adpa_reg);
- temp |= ADPA_DAC_ENABLE;
- I915_WRITE(crt->adpa_reg, temp);
-}
-
/* Note: The caller is required to filter out dpms modes not supported by the
* platform. */
static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
I915_WRITE(crt->adpa_reg, temp);
}
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+ intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+ struct intel_crt *crt = intel_encoder_to_crt(encoder);
+
+ intel_crt_set_dpms(encoder, crt->connector->base.dpms);
+}
+
+
static void intel_crt_dpms(struct drm_connector *connector, int mode)
{
struct drm_device *dev = connector->dev;
}
connector = &intel_connector->base;
+ crt->connector = intel_connector;
drm_connector_init(dev, &intel_connector->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_dp *intel_dp = &intel_dig_port->dp;
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+ mutex_lock(&dev->mode_config.mutex);
ironlake_panel_vdd_off_sync(intel_dp);
+ mutex_unlock(&dev->mode_config.mutex);
}
kfree(intel_dig_port);
}
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_device *device = nv_device(drm->device);
struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
- struct nouveau_abi16_chan *chan, *temp;
+ struct nouveau_abi16_chan *chan = NULL, *temp;
struct nouveau_abi16_ntfy *ntfy;
struct nouveau_object *object;
struct nv_dma_class args = {};
if (unlikely(nv_device(abi16->device)->card_type >= NV_C0))
return nouveau_abi16_put(abi16, -EINVAL);
- list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
- if (chan->chan->handle == (NVDRM_CHAN | info->channel))
+ list_for_each_entry(temp, &abi16->channels, head) {
+ if (temp->chan->handle == (NVDRM_CHAN | info->channel)) {
+ chan = temp;
break;
- chan = NULL;
+ }
}
if (!chan)
{
struct drm_nouveau_gpuobj_free *fini = data;
struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
- struct nouveau_abi16_chan *chan, *temp;
+ struct nouveau_abi16_chan *chan = NULL, *temp;
struct nouveau_abi16_ntfy *ntfy;
int ret;
if (unlikely(!abi16))
return -ENOMEM;
- list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
- if (chan->chan->handle == (NVDRM_CHAN | fini->channel))
+ list_for_each_entry(temp, &abi16->channels, head) {
+ if (temp->chan->handle == (NVDRM_CHAN | fini->channel)) {
+ chan = temp;
break;
- chan = NULL;
+ }
}
if (!chan)
static struct drm_driver driver;
+static int
+nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
+{
+ struct nouveau_drm *drm =
+ container_of(event, struct nouveau_drm, vblank[head]);
+ drm_handle_vblank(drm->dev, head);
+ return NVKM_EVENT_KEEP;
+}
+
static int
nouveau_drm_vblank_enable(struct drm_device *dev, int head)
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
- nouveau_event_get(pdisp->vblank, head, &drm->vblank);
+
+ if (WARN_ON_ONCE(head > ARRAY_SIZE(drm->vblank)))
+ return -EIO;
+ WARN_ON_ONCE(drm->vblank[head].func);
+ drm->vblank[head].func = nouveau_drm_vblank_handler;
+ nouveau_event_get(pdisp->vblank, head, &drm->vblank[head]);
return 0;
}
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
- nouveau_event_put(pdisp->vblank, head, &drm->vblank);
-}
-
-static int
-nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
-{
- struct nouveau_drm *drm =
- container_of(event, struct nouveau_drm, vblank);
- drm_handle_vblank(drm->dev, head);
- return NVKM_EVENT_KEEP;
+ if (drm->vblank[head].func)
+ nouveau_event_put(pdisp->vblank, head, &drm->vblank[head]);
+ else
+ WARN_ON_ONCE(1);
+ drm->vblank[head].func = NULL;
}
static u64
dev->dev_private = drm;
drm->dev = dev;
- drm->vblank.func = nouveau_drm_vblank_handler;
INIT_LIST_HEAD(&drm->clients);
spin_lock_init(&drm->tile.lock);
struct nvbios vbios;
struct nouveau_display *display;
struct backlight_device *backlight;
- struct nouveau_eventh vblank;
+ struct nouveau_eventh vblank[4];
/* power management */
struct nouveau_pm *pm;
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
- { HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
hdev->product <= USB_DEVICE_ID_VELLEMAN_K8061_LAST))
return true;
break;
+ case USB_VENDOR_ID_ATMEL_V_USB:
+ /* Masterkit MA901 usb radio based on Atmel tiny85 chip and
+ * it has the same USB ID as many Atmel V-USB devices. This
+ * usb radio is handled by radio-ma901.c driver so we want
+ * ignore the hid. Check the name, bus, product and ignore
+ * if we have MA901 usb radio.
+ */
+ if (hdev->product == USB_DEVICE_ID_ATMEL_V_USB &&
+ hdev->bus == BUS_USB &&
+ strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0)
+ return true;
+ break;
}
if (hdev->type == HID_TYPE_USBMOUSE &&
#define USB_VENDOR_ID_ATMEL 0x03eb
#define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c
#define USB_DEVICE_ID_ATMEL_MXT_DIGITIZER 0x2118
+#define USB_VENDOR_ID_ATMEL_V_USB 0x16c0
+#define USB_DEVICE_ID_ATMEL_V_USB 0x05df
#define USB_VENDOR_ID_AUREAL 0x0755
#define USB_DEVICE_ID_AUREAL_W01RN 0x2626
#define USB_VENDOR_ID_MADCATZ 0x0738
#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
-#define USB_VENDOR_ID_MASTERKIT 0x16c0
-#define USB_DEVICE_ID_MASTERKIT_MA901RADIO 0x05df
-
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
return 0;
}
+static void magicmouse_input_configured(struct hid_device *hdev,
+ struct hid_input *hi)
+
+{
+ struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+
+ int ret = magicmouse_setup_input(msc->input, hdev);
+ if (ret) {
+ hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
+ /* clean msc->input to notify probe() of the failure */
+ msc->input = NULL;
+ }
+}
+
+
static int magicmouse_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
goto err_free;
}
- /* We do this after hid-input is done parsing reports so that
- * hid-input uses the most natural button and axis IDs.
- */
- if (msc->input) {
- ret = magicmouse_setup_input(msc->input, hdev);
- if (ret) {
- hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
- goto err_stop_hw;
- }
+ if (!msc->input) {
+ hid_err(hdev, "magicmouse input not registered\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
}
if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
.remove = magicmouse_remove,
.raw_event = magicmouse_raw_event,
.input_mapping = magicmouse_input_mapping,
+ .input_configured = magicmouse_input_configured,
};
module_hid_driver(magicmouse_driver);
adap->algo = &i2c_dw_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&adap->dev, ACPI_HANDLE(&pdev->dev));
r = i2c_add_numbered_adapter(adap);
if (r) {
#include "qib.h"
#include "qib_7220.h"
-#define SD7220_FW_NAME "intel/sd7220.fw"
+#define SD7220_FW_NAME "qlogic/sd7220.fw"
MODULE_FIRMWARE(SD7220_FW_NAME);
/*
config VIDEO_SH_VEU
tristate "SuperH VEU mem2mem video processing driver"
- depends on VIDEO_DEV && VIDEO_V4L2
+ depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
help
static int usb_ma901radio_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ struct usb_device *dev = interface_to_usbdev(intf);
struct ma901radio_device *radio;
int retval = 0;
+ /* Masterkit MA901 usb radio has the same USB ID as many others
+ * Atmel V-USB devices. Let's make additional checks to be sure
+ * that this is our device.
+ */
+
+ if (dev->product && dev->manufacturer &&
+ (strncmp(dev->product, "MA901", 5) != 0
+ || strncmp(dev->manufacturer, "www.masterkit.ru", 16) != 0))
+ return -ENODEV;
+
radio = kzalloc(sizeof(struct ma901radio_device), GFP_KERNEL);
if (!radio) {
dev_err(&intf->dev, "kzalloc for ma901radio_device failed\n");
return -EINVAL;
}
+ write_unlock_bh(&bond->lock);
/* unregister rx_handler early so bond_handle_frame wouldn't be called
* for this slave anymore.
*/
netdev_rx_handler_unregister(slave_dev);
- write_unlock_bh(&bond->lock);
- synchronize_net();
write_lock_bh(&bond->lock);
if (!all && !bond->params.fail_over_mac) {
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+ pr_err("%s: Invalid arp_interval value %d not in range 0-%d; rejected.\n",
bond->dev->name, new_value, INT_MAX);
ret = -EINVAL;
goto out;
pr_info("%s: Setting ARP monitoring interval to %d.\n",
bond->dev->name, new_value);
bond->params.arp_interval = new_value;
- if (bond->params.miimon) {
- pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
- bond->dev->name, bond->dev->name);
- bond->params.miimon = 0;
- }
- if (!bond->params.arp_targets[0]) {
- pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
- bond->dev->name);
+ if (new_value) {
+ if (bond->params.miimon) {
+ pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+ bond->dev->name, bond->dev->name);
+ bond->params.miimon = 0;
+ }
+ if (!bond->params.arp_targets[0])
+ pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+ bond->dev->name);
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
* timer will get fired off when the open function
* is called.
*/
- cancel_delayed_work_sync(&bond->mii_work);
- queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->arp_work);
+ } else {
+ cancel_delayed_work_sync(&bond->mii_work);
+ queue_delayed_work(bond->wq, &bond->arp_work, 0);
+ }
}
-
out:
rtnl_unlock();
return ret;
}
if (new_value < 0) {
pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
goto out;
}
if (new_value < 0) {
- pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ pr_err("%s: Invalid up delay value %d not in range %d-%d; rejected.\n",
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
} else {
}
if (new_value < 0) {
pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
- bond->dev->name, new_value, 1, INT_MAX);
+ bond->dev->name, new_value, 0, INT_MAX);
ret = -EINVAL;
goto out;
- } else {
- pr_info("%s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, new_value);
- bond->params.miimon = new_value;
- if (bond->params.updelay)
- pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
- if (bond->params.downdelay)
- pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
- if (bond->params.arp_interval) {
- pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
- bond->dev->name);
- bond->params.arp_interval = 0;
- if (bond->params.arp_validate) {
- bond->params.arp_validate =
- BOND_ARP_VALIDATE_NONE;
- }
- }
-
- if (bond->dev->flags & IFF_UP) {
- /* If the interface is up, we may need to fire off
- * the MII timer. If the interface is down, the
- * timer will get fired off when the open function
- * is called.
- */
+ }
+ pr_info("%s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, new_value);
+ bond->params.miimon = new_value;
+ if (bond->params.updelay)
+ pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
+ if (bond->params.downdelay)
+ pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
+ if (new_value && bond->params.arp_interval) {
+ pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+ bond->dev->name);
+ bond->params.arp_interval = 0;
+ if (bond->params.arp_validate)
+ bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
+ }
+ if (bond->dev->flags & IFF_UP) {
+ /* If the interface is up, we may need to fire off
+ * the MII timer. If the interface is down, the
+ * timer will get fired off when the open function
+ * is called.
+ */
+ if (!new_value) {
+ cancel_delayed_work_sync(&bond->mii_work);
+ } else {
cancel_delayed_work_sync(&bond->arp_work);
queue_delayed_work(bond->wq, &bond->mii_work, 0);
}
config CAN_PEAK_PCMCIA
tristate "PEAK PCAN-PC Card"
depends on PCMCIA
+ depends on HAS_IOPORT
---help---
This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
from PEAK-System (http://www.peak-system.com). To compile this
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
- (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+ (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
* See states on p. 23 of the Datasheet.
*/
if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
- priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
return flag;
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
priv->write_reg(priv, REG_CMR, val);
- priv->read_reg(priv, REG_SR);
+ priv->read_reg(priv, SJA1000_REG_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD 0x00
#define REG_CMR 0x01
-#define REG_SR 0x02
+#define SJA1000_REG_SR 0x02
#define REG_IR 0x03
#define REG_IER 0x04
#define REG_ALC 0x0B
struct atl1e_hw hw;
struct atl1e_hw_stats hw_stats;
- bool have_msi;
u32 wol;
u16 link_speed;
u16 link_duplex;
struct net_device *netdev = adapter->netdev;
free_irq(adapter->pdev->irq, netdev);
-
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
}
static int atl1e_request_irq(struct atl1e_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
struct net_device *netdev = adapter->netdev;
- int flags = 0;
int err = 0;
- adapter->have_msi = true;
- err = pci_enable_msi(pdev);
- if (err) {
- netdev_dbg(netdev,
- "Unable to allocate MSI interrupt Error: %d\n", err);
- adapter->have_msi = false;
- }
-
- if (!adapter->have_msi)
- flags |= IRQF_SHARED;
- err = request_irq(pdev->irq, atl1e_intr, flags, netdev->name, netdev);
+ err = request_irq(pdev->irq, atl1e_intr, IRQF_SHARED, netdev->name,
+ netdev);
if (err) {
netdev_dbg(adapter->netdev,
"Unable to allocate interrupt Error: %d\n", err);
- if (adapter->have_msi)
- pci_disable_msi(pdev);
return err;
}
netdev_dbg(netdev, "atl1e_request_irq OK\n");
if (j + len > block_end)
goto partno;
- memcpy(tp->fw_ver, &vpd_data[j], len);
- strncat(tp->fw_ver, " bc ", vpdlen - len - 1);
+ if (len >= sizeof(tp->fw_ver))
+ len = sizeof(tp->fw_ver) - 1;
+ memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
+ snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len,
+ &vpd_data[j]);
}
partno:
#define XGMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
/* XGMAC_INT_STAT reg */
+#define XGMAC_INT_STAT_PMTIM 0x00800000 /* PMT Interrupt Mask */
#define XGMAC_INT_STAT_PMT 0x0080 /* PMT Interrupt Status */
#define XGMAC_INT_STAT_LPI 0x0040 /* LPI Interrupt Status */
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_STATUS);
writel(DMA_INTR_DEFAULT_MASK, ioaddr + XGMAC_DMA_INTR_ENA);
+ /* Mask power mgt interrupt */
+ writel(XGMAC_INT_STAT_PMTIM, ioaddr + XGMAC_INT_STAT);
+
/* XGMAC requires AXI bus init. This is a 'magic number' for now */
writel(0x0077000E, ioaddr + XGMAC_DMA_AXI_BUS);
struct sk_buff *skb;
int frame_len;
+ if (!dma_ring_cnt(priv->rx_head, priv->rx_tail, DMA_RX_RING_SZ))
+ break;
+
entry = priv->rx_tail;
p = priv->dma_rx + entry;
if (desc_get_owner(p))
unsigned int pmt = 0;
if (mode & WAKE_MAGIC)
- pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT;
+ pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_MAGIC_PKT_EN;
if (mode & WAKE_UCAST)
pmt |= XGMAC_PMT_POWERDOWN | XGMAC_PMT_GLBL_UNICAST;
tmp = readl(reg);
}
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+ if (db->in_suspend)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+/* Read a word from phyxcer */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int reg_save;
+ int ret;
+
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Issue phyxcer read command */
+ iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait read complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+
+ /* The read data keeps on REG_0D & REG_0E */
+ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
+
+ dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
+ return ret;
+}
+
+/* Write a word to phyxcer */
+static void
+dm9000_phy_write(struct net_device *dev,
+ int phyaddr_unused, int reg, int value)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned long reg_save;
+
+ dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ iow(db, DM9000_EPDRL, value);
+ iow(db, DM9000_EPDRH, value >> 8);
+
+ /* Issue phyxcer write command */
+ iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait write complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ mutex_unlock(&db->addr_lock);
+}
+
/* dm9000_set_io
*
* select the specified set of io routines to use with the
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */
+
ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
/* if wol is needed, then always set NCR_WAKEEN otherwise we end
return 0;
}
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
- if (db->in_suspend)
- mdelay(ms);
- else
- msleep(ms);
-}
-
-/*
- * Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned int reg_save;
- int ret;
-
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- dm9000_msleep(db, 1); /* Wait read complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
-
- /* The read data keeps on REG_0D & REG_0E */
- ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- mutex_unlock(&db->addr_lock);
-
- dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
- return ret;
-}
-
-/*
- * Write a word to phyxcer
- */
-static void
-dm9000_phy_write(struct net_device *dev,
- int phyaddr_unused, int reg, int value)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned long reg_save;
-
- dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- /* Fill the written data into REG_0D & REG_0E */
- iow(db, DM9000_EPDRL, value);
- iow(db, DM9000_EPDRH, value >> 8);
-
- iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock, flags);
-
- dm9000_msleep(db, 1); /* Wait write complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
-
- spin_unlock_irqrestore(&db->lock, flags);
- mutex_unlock(&db->addr_lock);
-}
-
static void
dm9000_shutdown(struct net_device *dev)
{
db->flags |= DM9000_PLATF_SIMPLE_PHY;
#endif
- dm9000_reset(db);
+ /* Fixing bug on dm9000_probe, takeover dm9000_reset(db),
+ * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo
+ * while probe stage.
+ */
+
+ iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST);
/* try multiple times, DM9000 sometimes gets the read wrong */
for (i = 0; i < 8; i++) {
#define NCR_WAKEEN (1<<6)
#define NCR_FCOL (1<<4)
#define NCR_FDX (1<<3)
-#define NCR_LBK (3<<1)
+
+#define NCR_RESERVED (3<<1)
+#define NCR_MAC_LBK (1<<1)
#define NCR_RST (1<<0)
#define NSR_SPEED (1<<7)
#define ISR_LNKCHNG (1<<5)
#define ISR_UNDERRUN (1<<4)
+/* Davicom MII registers.
+ */
+
+#define MII_DM_DSPCR 0x1b /* DSP Control Register */
+
+#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */
+
#endif /* _DM9000X_H_ */
return NETDEV_TX_OK;
}
+/* Init RX & TX buffer descriptors
+ */
+static void fec_enet_bd_init(struct net_device *dev)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+ struct bufdesc *bdp;
+ unsigned int i;
+
+ /* Initialize the receive buffer descriptors. */
+ bdp = fep->rx_bd_base;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ if (bdp->cbd_bufaddr)
+ bdp->cbd_sc = BD_ENET_RX_EMPTY;
+ else
+ bdp->cbd_sc = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+
+ fep->cur_rx = fep->rx_bd_base;
+
+ /* ...and the same for transmit */
+ bdp = fep->tx_bd_base;
+ fep->cur_tx = bdp;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+
+ /* Initialize the BD for every fragment in the page. */
+ bdp->cbd_sc = 0;
+ if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) {
+ dev_kfree_skb_any(fep->tx_skbuff[i]);
+ fep->tx_skbuff[i] = NULL;
+ }
+ bdp->cbd_bufaddr = 0;
+ bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
+ }
+
+ /* Set the last buffer to wrap */
+ bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
+ bdp->cbd_sc |= BD_SC_WRAP;
+ fep->dirty_tx = bdp;
+}
+
/* This function is called to start or restart the FEC during a link
* change. This only happens when switching between half and full
* duplex.
/* Set maximum receive buffer size. */
writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE);
+ fec_enet_bd_init(ndev);
+
/* Set receive and transmit descriptor base. */
writel(fep->bd_dma, fep->hwp + FEC_R_DES_START);
if (fep->bufdesc_ex)
writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc)
* RX_RING_SIZE, fep->hwp + FEC_X_DES_START);
- fep->cur_rx = fep->rx_bd_base;
for (i = 0; i <= TX_RING_MOD_MASK; i++) {
if (fep->tx_skbuff[i]) {
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct bufdesc *cbd_base;
- struct bufdesc *bdp;
- unsigned int i;
/* Allocate memory for buffer descriptors. */
cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma,
return -ENOMEM;
}
+ memset(cbd_base, 0, PAGE_SIZE);
spin_lock_init(&fep->hw_lock);
fep->netdev = ndev;
writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK);
netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT);
- /* Initialize the receive buffer descriptors. */
- bdp = fep->rx_bd_base;
- for (i = 0; i < RX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
-
- /* ...and the same for transmit */
- bdp = fep->tx_bd_base;
- fep->cur_tx = bdp;
- for (i = 0; i < TX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page. */
- bdp->cbd_sc = 0;
- bdp->cbd_bufaddr = 0;
- bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex);
- }
-
- /* Set the last buffer to wrap */
- bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex);
- bdp->cbd_sc |= BD_SC_WRAP;
- fep->dirty_tx = bdp;
-
fec_restart(ndev, 0);
return 0;
txdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data, skb->len,
DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, txdr->buffer_info[i].dma)) {
+ ret_val = 4;
+ goto err_nomem;
+ }
tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
tx_desc->lower.data = cpu_to_le32(skb->len);
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
GFP_KERNEL);
if (!rxdr->buffer_info) {
- ret_val = 4;
+ ret_val = 5;
goto err_nomem;
}
rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
GFP_KERNEL);
if (!rxdr->desc) {
- ret_val = 5;
+ ret_val = 6;
goto err_nomem;
}
memset(rxdr->desc, 0, rxdr->size);
skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
if (!skb) {
- ret_val = 6;
+ ret_val = 7;
goto err_nomem;
}
skb_reserve(skb, NET_IP_ALIGN);
rxdr->buffer_info[i].dma =
dma_map_single(&pdev->dev, skb->data,
E1000_RXBUFFER_2048, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, rxdr->buffer_info[i].dma)) {
+ ret_val = 8;
+ goto err_nomem;
+ }
rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
memset(skb->data, 0x00, skb->len);
}
}
}
- if (!buffer_info->dma)
+ if (!buffer_info->dma) {
buffer_info->dma = dma_map_page(&pdev->dev,
buffer_info->page, 0,
PAGE_SIZE,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
skb->data,
adapter->rx_buffer_len,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
rx_desc = IXGB_RX_DESC(*rx_ring, i);
rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
rx_desc->status = 0;
- if (++i == rx_ring->count) i = 0;
+ if (++i == rx_ring->count)
+ i = 0;
buffer_info = &rx_ring->buffer_info[i];
}
sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
- tp = space - 2048/8;
+ tp = space - 8192/8;
sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
} else {
GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */
GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */
-#define GMAC_DEF_MSK GM_IS_TX_FF_UR
+#define GMAC_DEF_MSK (GM_IS_TX_FF_UR | GM_IS_RX_FF_OR)
};
/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac)
{
- unsigned int i;
- for (i = ETH_ALEN - 1; i; --i) {
+ int i;
+ for (i = ETH_ALEN - 1; i >= 0; --i) {
dst_mac[i] = src_mac & 0xff;
src_mac >>= 8;
}
for (; rxfc != 0; rxfc--) {
rxh = ks8851_rdreg32(ks, KS_RXFHSR);
rxstat = rxh & 0xffff;
- rxlen = rxh >> 16;
+ rxlen = (rxh >> 16) & 0xfff;
netif_dbg(ks, rx_status, ks->netdev,
"rx: stat 0x%04x, len 0x%04x\n", rxstat, rxlen);
if (felic_stat & ECSR_LCHNG) {
/* Link Changed */
if (mdp->cd->no_psr || mdp->no_ether_link) {
- if (mdp->link == PHY_DOWN)
- link_stat = 0;
- else
- link_stat = PHY_ST_LINK;
+ goto ignore_link;
} else {
link_stat = (sh_eth_read(ndev, PSR));
if (mdp->ether_link_active_low)
}
}
+ignore_link:
if (intr_status & EESR_TWB) {
/* Write buck end. unused write back interrupt */
if (intr_status & EESR_TABT) /* Transmit Abort int */
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_cpu_data *cd = mdp->cd;
irqreturn_t ret = IRQ_NONE;
- u32 intr_status = 0;
+ unsigned long intr_status;
spin_lock(&mdp->lock);
- /* Get interrpt stat */
+ /* Get interrupt status */
intr_status = sh_eth_read(ndev, EESR);
+ /* Mask it with the interrupt mask, forcing ECI interrupt to be always
+ * enabled since it's the one that comes thru regardless of the mask,
+ * and we need to fully handle it in sh_eth_error() in order to quench
+ * it as it doesn't get cleared by just writing 1 to the ECI bit...
+ */
+ intr_status &= sh_eth_read(ndev, EESIPR) | DMAC_M_ECI;
/* Clear interrupt */
if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
struct phy_device *phydev = mdp->phydev;
int new_state = 0;
- if (phydev->link != PHY_DOWN) {
+ if (phydev->link) {
if (phydev->duplex != mdp->duplex) {
new_state = 1;
mdp->duplex = phydev->duplex;
if (mdp->cd->set_rate)
mdp->cd->set_rate(ndev);
}
- if (mdp->link == PHY_DOWN) {
+ if (!mdp->link) {
sh_eth_write(ndev,
(sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
new_state = 1;
mdp->link = phydev->link;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_enable(ndev);
}
} else if (mdp->link) {
new_state = 1;
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
+ if (mdp->cd->no_psr || mdp->no_ether_link)
+ sh_eth_rcv_snd_disable(ndev);
}
if (new_state && netif_msg_link(mdp))
snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
mdp->mii_bus->id , mdp->phy_id);
- mdp->link = PHY_DOWN;
+ mdp->link = 0;
mdp->speed = 0;
mdp->duplex = -1;
u32 phy_id; /* PHY ID */
struct mii_bus *mii_bus; /* MDIO bus control */
struct phy_device *phydev; /* PHY device control */
- enum phy_state link;
+ int link;
phy_interface_t phy_interface;
int msg_enable;
int speed;
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
cpts_tx_timestamp(priv->cpts, skb);
priv->stats.tx_packets++;
priv->stats.tx_bytes += len;
* queue is stopped then start the queue as we have free desc for tx
*/
if (unlikely(netif_queue_stopped(ndev)))
- netif_start_queue(ndev);
+ netif_wake_queue(ndev);
ndev->stats.tx_packets++;
ndev->stats.tx_bytes += len;
dev_kfree_skb_any(skb);
static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
{
struct usbnet *dev = netdev_priv(netdev);
+ int ret;
+
+ if (new_mtu > MAX_SINGLE_PACKET_SIZE)
+ return -EINVAL;
- int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+ ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set mac rx frame length\n");
return ret;
netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
- ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+ ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set max rx frame length\n");
return ret;
else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
dev->net->stats.rx_frame_errors++;
} else {
- /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
- if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+ /* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
+ if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
netif_dbg(dev, rx_err, dev->net,
"size err rx_cmd_a=0x%08x\n",
rx_cmd_a);
{
struct ath_softc *sc = (struct ath_softc *)data;
- ieee80211_queue_work(sc->hw, &sc->hw_check_work);
+ if (!test_bit(SC_OP_INVALID, &sc->sc_flags))
+ ieee80211_queue_work(sc->hw, &sc->hw_check_work);
}
/*
const struct b43_dma_ops *ops;
struct b43_dmaring *ring;
struct b43_dmadesc_meta *meta;
+ static const struct b43_txstatus fake; /* filled with 0 */
+ const struct b43_txstatus *txstat;
int slot, firstused;
bool frame_succeed;
+ int skip;
+ static u8 err_out1, err_out2;
ring = parse_cookie(dev, status->cookie, &slot);
if (unlikely(!ring))
firstused = ring->current_slot - ring->used_slots + 1;
if (firstused < 0)
firstused = ring->nr_slots + firstused;
+
+ skip = 0;
if (unlikely(slot != firstused)) {
/* This possibly is a firmware bug and will result in
- * malfunction, memory leaks and/or stall of DMA functionality. */
- b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. "
- "Expected %d, but got %d\n",
- ring->index, firstused, slot);
- return;
+ * malfunction, memory leaks and/or stall of DMA functionality.
+ */
+ if (slot == next_slot(ring, next_slot(ring, firstused))) {
+ /* If a single header/data pair was missed, skip over
+ * the first two slots in an attempt to recover.
+ */
+ slot = firstused;
+ skip = 2;
+ if (!err_out1) {
+ /* Report the error once. */
+ b43dbg(dev->wl,
+ "Skip on DMA ring %d slot %d.\n",
+ ring->index, slot);
+ err_out1 = 1;
+ }
+ } else {
+ /* More than a single header/data pair were missed.
+ * Report this error once.
+ */
+ if (!err_out2)
+ b43dbg(dev->wl,
+ "Out of order TX status report on DMA ring %d. Expected %d, but got %d\n",
+ ring->index, firstused, slot);
+ err_out2 = 1;
+ return;
+ }
}
ops = ring->ops;
slot, firstused, ring->index);
break;
}
+
if (meta->skb) {
struct b43_private_tx_info *priv_info =
- b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
+ b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
- unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+ unmap_descbuffer(ring, meta->dmaaddr,
+ meta->skb->len, 1);
kfree(priv_info->bouncebuffer);
priv_info->bouncebuffer = NULL;
} else {
struct ieee80211_tx_info *info;
if (unlikely(!meta->skb)) {
- /* This is a scatter-gather fragment of a frame, so
- * the skb pointer must not be NULL. */
+ /* This is a scatter-gather fragment of a frame,
+ * so the skb pointer must not be NULL.
+ */
b43dbg(dev->wl, "TX status unexpected NULL skb "
"at slot %d (first=%d) on ring %d\n",
slot, firstused, ring->index);
/*
* Call back to inform the ieee80211 subsystem about
- * the status of the transmission.
+ * the status of the transmission. When skipping over
+ * a missed TX status report, use a status structure
+ * filled with zeros to indicate that the frame was not
+ * sent (frame_count 0) and not acknowledged
*/
- frame_succeed = b43_fill_txstatus_report(dev, info, status);
+ if (unlikely(skip))
+ txstat = &fake;
+ else
+ txstat = status;
+
+ frame_succeed = b43_fill_txstatus_report(dev, info,
+ txstat);
#ifdef CONFIG_B43_DEBUG
if (frame_succeed)
ring->nr_succeed_tx_packets++;
/* Everything unmapped and free'd. So it's not used anymore. */
ring->used_slots--;
- if (meta->is_last_fragment) {
+ if (meta->is_last_fragment && !skip) {
/* This is the last scatter-gather
* fragment of the frame. We are done. */
break;
}
slot = next_slot(ring, slot);
+ if (skip > 0)
+ --skip;
}
if (ring->stopped) {
B43_WARN_ON(free_slots(ring) < TX_SLOTS_PER_FRAME);
u16 clip_off[2] = { 0xFFFF, 0xFFFF };
u8 vcm_final = 0;
- s8 offset[4];
+ s32 offset[4];
s32 results[8][4] = { };
s32 results_min[4] = { };
s32 poll_results[4] = { };
}
for (i = 0; i < 4; i += 2) {
s32 curr;
- s32 mind = 40;
+ s32 mind = 0x100000;
s32 minpoll = 249;
u8 minvcm = 0;
if (2 * core != i)
u8 regs_save_radio[2];
u16 regs_save_phy[2];
- s8 offset[4];
+ s32 offset[4];
u8 core;
u8 rail;
}
for (i = 0; i < 4; i++) {
- s32 mind = 40;
+ s32 mind = 0x100000;
u8 minvcm = 0;
s32 minpoll = 249;
s32 curr;
gain0_15 = ((biq1 & 0xf) << 12) |
((tia & 0xf) << 8) |
((lna2 & 0x3) << 6) |
- ((lna2 & 0x3) << 4) |
- ((lna1 & 0x3) << 2) |
- ((lna1 & 0x3) << 0);
+ ((lna2 &
+ 0x3) << 4) | ((lna1 & 0x3) << 2) | ((lna1 & 0x3) << 0);
mod_phy_reg(pi, 0x4b6, (0xffff << 0), gain0_15 << 0);
mod_phy_reg(pi, 0x4b7, (0xf << 0), gain16_19 << 0);
}
mod_phy_reg(pi, 0x44d, (0x1 << 0), (!trsw) << 0);
- mod_phy_reg(pi, 0x4b1, (0x3 << 11), lna1 << 11);
- mod_phy_reg(pi, 0x4e6, (0x3 << 3), lna1 << 3);
}
return (iq_est.i_pwr + iq_est.q_pwr) / nsamples;
}
-static bool wlc_lcnphy_rx_iq_cal_gain(struct brcms_phy *pi, u16 biq1_gain,
- u16 tia_gain, u16 lna2_gain)
-{
- u32 i_thresh_l, q_thresh_l;
- u32 i_thresh_h, q_thresh_h;
- struct lcnphy_iq_est iq_est_h, iq_est_l;
-
- wlc_lcnphy_set_rx_gain_by_distribution(pi, 0, 0, 0, biq1_gain, tia_gain,
- lna2_gain, 0);
-
- wlc_lcnphy_rx_gain_override_enable(pi, true);
- wlc_lcnphy_start_tx_tone(pi, 2000, (40 >> 1), 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_l))
- return false;
-
- wlc_lcnphy_start_tx_tone(pi, 2000, 40, 0);
- udelay(500);
- write_radio_reg(pi, RADIO_2064_REG112, 0);
- if (!wlc_lcnphy_rx_iq_est(pi, 1024, 32, &iq_est_h))
- return false;
-
- i_thresh_l = (iq_est_l.i_pwr << 1);
- i_thresh_h = (iq_est_l.i_pwr << 2) + iq_est_l.i_pwr;
-
- q_thresh_l = (iq_est_l.q_pwr << 1);
- q_thresh_h = (iq_est_l.q_pwr << 2) + iq_est_l.q_pwr;
- if ((iq_est_h.i_pwr > i_thresh_l) &&
- (iq_est_h.i_pwr < i_thresh_h) &&
- (iq_est_h.q_pwr > q_thresh_l) &&
- (iq_est_h.q_pwr < q_thresh_h))
- return true;
-
- return false;
-}
-
static bool
wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
const struct lcnphy_rx_iqcomp *iqcomp,
RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
rfoverride3_old, rfoverride3val_old, rfoverride4_old,
rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
- int tia_gain, lna2_gain, biq1_gain;
- bool set_gain;
+ int tia_gain;
+ u32 received_power, rx_pwr_threshold;
u16 old_sslpnCalibClkEnCtrl, old_sslpnRxFeClkEnCtrl;
u16 values_to_save[11];
s16 *ptr;
goto cal_done;
}
- WARN_ON(module != 1);
- tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
- wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
-
- for (i = 0; i < 11; i++)
- values_to_save[i] =
- read_radio_reg(pi, rxiq_cal_rf_reg[i]);
- Core1TxControl_old = read_phy_reg(pi, 0x631);
-
- or_phy_reg(pi, 0x631, 0x0015);
-
- RFOverride0_old = read_phy_reg(pi, 0x44c);
- RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
- rfoverride2_old = read_phy_reg(pi, 0x4b0);
- rfoverride2val_old = read_phy_reg(pi, 0x4b1);
- rfoverride3_old = read_phy_reg(pi, 0x4f9);
- rfoverride3val_old = read_phy_reg(pi, 0x4fa);
- rfoverride4_old = read_phy_reg(pi, 0x938);
- rfoverride4val_old = read_phy_reg(pi, 0x939);
- afectrlovr_old = read_phy_reg(pi, 0x43b);
- afectrlovrval_old = read_phy_reg(pi, 0x43c);
- old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
- old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
-
- tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
- if (tx_gain_override_old) {
- wlc_lcnphy_get_tx_gain(pi, &old_gains);
- tx_gain_index_old = pi_lcn->lcnphy_current_index;
- }
-
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
+ if (module == 1) {
- mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
+ tx_pwr_ctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, LCNPHY_TX_PWR_CTRL_OFF);
- mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
+ for (i = 0; i < 11; i++)
+ values_to_save[i] =
+ read_radio_reg(pi, rxiq_cal_rf_reg[i]);
+ Core1TxControl_old = read_phy_reg(pi, 0x631);
+
+ or_phy_reg(pi, 0x631, 0x0015);
+
+ RFOverride0_old = read_phy_reg(pi, 0x44c);
+ RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
+ rfoverride2_old = read_phy_reg(pi, 0x4b0);
+ rfoverride2val_old = read_phy_reg(pi, 0x4b1);
+ rfoverride3_old = read_phy_reg(pi, 0x4f9);
+ rfoverride3val_old = read_phy_reg(pi, 0x4fa);
+ rfoverride4_old = read_phy_reg(pi, 0x938);
+ rfoverride4val_old = read_phy_reg(pi, 0x939);
+ afectrlovr_old = read_phy_reg(pi, 0x43b);
+ afectrlovrval_old = read_phy_reg(pi, 0x43c);
+ old_sslpnCalibClkEnCtrl = read_phy_reg(pi, 0x6da);
+ old_sslpnRxFeClkEnCtrl = read_phy_reg(pi, 0x6db);
+
+ tx_gain_override_old = wlc_lcnphy_tx_gain_override_enabled(pi);
+ if (tx_gain_override_old) {
+ wlc_lcnphy_get_tx_gain(pi, &old_gains);
+ tx_gain_index_old = pi_lcn->lcnphy_current_index;
+ }
- write_radio_reg(pi, RADIO_2064_REG116, 0x06);
- write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
- write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
- write_radio_reg(pi, RADIO_2064_REG098, 0x03);
- write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
- mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
- write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
- write_radio_reg(pi, RADIO_2064_REG114, 0x01);
- write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
- write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
-
- mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
- mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
- mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
- mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
- mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
- mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_idx);
- mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
- mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
+ mod_phy_reg(pi, 0x4f9, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x4fa, (0x1 << 0), 0 << 0);
- write_phy_reg(pi, 0x6da, 0xffff);
- or_phy_reg(pi, 0x6db, 0x3);
+ mod_phy_reg(pi, 0x43b, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x43c, (0x1 << 1), 0 << 1);
- wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
- set_gain = false;
-
- lna2_gain = 3;
- while ((lna2_gain >= 0) && !set_gain) {
- tia_gain = 4;
-
- while ((tia_gain >= 0) && !set_gain) {
- biq1_gain = 6;
-
- while ((biq1_gain >= 0) && !set_gain) {
- set_gain = wlc_lcnphy_rx_iq_cal_gain(pi,
- (u16)
- biq1_gain,
- (u16)
- tia_gain,
- (u16)
- lna2_gain);
- biq1_gain -= 1;
- }
+ write_radio_reg(pi, RADIO_2064_REG116, 0x06);
+ write_radio_reg(pi, RADIO_2064_REG12C, 0x07);
+ write_radio_reg(pi, RADIO_2064_REG06A, 0xd3);
+ write_radio_reg(pi, RADIO_2064_REG098, 0x03);
+ write_radio_reg(pi, RADIO_2064_REG00B, 0x7);
+ mod_radio_reg(pi, RADIO_2064_REG113, 1 << 4, 1 << 4);
+ write_radio_reg(pi, RADIO_2064_REG01D, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG114, 0x01);
+ write_radio_reg(pi, RADIO_2064_REG02E, 0x10);
+ write_radio_reg(pi, RADIO_2064_REG12A, 0x08);
+
+ mod_phy_reg(pi, 0x938, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x939, (0x1 << 0), 0 << 0);
+ mod_phy_reg(pi, 0x938, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x939, (0x1 << 1), 1 << 1);
+ mod_phy_reg(pi, 0x938, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x939, (0x1 << 2), 1 << 2);
+ mod_phy_reg(pi, 0x938, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x939, (0x1 << 3), 1 << 3);
+ mod_phy_reg(pi, 0x938, (0x1 << 5), 1 << 5);
+ mod_phy_reg(pi, 0x939, (0x1 << 5), 0 << 5);
+
+ mod_phy_reg(pi, 0x43b, (0x1 << 0), 1 << 0);
+ mod_phy_reg(pi, 0x43c, (0x1 << 0), 0 << 0);
+
+ wlc_lcnphy_start_tx_tone(pi, 2000, 120, 0);
+ write_phy_reg(pi, 0x6da, 0xffff);
+ or_phy_reg(pi, 0x6db, 0x3);
+ wlc_lcnphy_set_trsw_override(pi, tx_switch, rx_switch);
+ wlc_lcnphy_rx_gain_override_enable(pi, true);
+
+ tia_gain = 8;
+ rx_pwr_threshold = 950;
+ while (tia_gain > 0) {
tia_gain -= 1;
+ wlc_lcnphy_set_rx_gain_by_distribution(pi,
+ 0, 0, 2, 2,
+ (u16)
+ tia_gain, 1, 0);
+ udelay(500);
+
+ received_power =
+ wlc_lcnphy_measure_digital_power(pi, 2000);
+ if (received_power < rx_pwr_threshold)
+ break;
}
- lna2_gain -= 1;
- }
+ result = wlc_lcnphy_calc_rx_iq_comp(pi, 0xffff);
- if (set_gain)
- result = wlc_lcnphy_calc_rx_iq_comp(pi, 1024);
- else
- result = false;
+ wlc_lcnphy_stop_tx_tone(pi);
- wlc_lcnphy_stop_tx_tone(pi);
+ write_phy_reg(pi, 0x631, Core1TxControl_old);
- write_phy_reg(pi, 0x631, Core1TxControl_old);
-
- write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
- write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
- write_phy_reg(pi, 0x4b0, rfoverride2_old);
- write_phy_reg(pi, 0x4b1, rfoverride2val_old);
- write_phy_reg(pi, 0x4f9, rfoverride3_old);
- write_phy_reg(pi, 0x4fa, rfoverride3val_old);
- write_phy_reg(pi, 0x938, rfoverride4_old);
- write_phy_reg(pi, 0x939, rfoverride4val_old);
- write_phy_reg(pi, 0x43b, afectrlovr_old);
- write_phy_reg(pi, 0x43c, afectrlovrval_old);
- write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
- write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
+ write_phy_reg(pi, 0x44c, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x44d, RFOverrideVal0_old);
+ write_phy_reg(pi, 0x4b0, rfoverride2_old);
+ write_phy_reg(pi, 0x4b1, rfoverride2val_old);
+ write_phy_reg(pi, 0x4f9, rfoverride3_old);
+ write_phy_reg(pi, 0x4fa, rfoverride3val_old);
+ write_phy_reg(pi, 0x938, rfoverride4_old);
+ write_phy_reg(pi, 0x939, rfoverride4val_old);
+ write_phy_reg(pi, 0x43b, afectrlovr_old);
+ write_phy_reg(pi, 0x43c, afectrlovrval_old);
+ write_phy_reg(pi, 0x6da, old_sslpnCalibClkEnCtrl);
+ write_phy_reg(pi, 0x6db, old_sslpnRxFeClkEnCtrl);
- wlc_lcnphy_clear_trsw_override(pi);
+ wlc_lcnphy_clear_trsw_override(pi);
- mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
+ mod_phy_reg(pi, 0x44c, (0x1 << 2), 0 << 2);
- for (i = 0; i < 11; i++)
- write_radio_reg(pi, rxiq_cal_rf_reg[i],
- values_to_save[i]);
+ for (i = 0; i < 11; i++)
+ write_radio_reg(pi, rxiq_cal_rf_reg[i],
+ values_to_save[i]);
- if (tx_gain_override_old)
- wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
- else
- wlc_lcnphy_disable_tx_gain_override(pi);
+ if (tx_gain_override_old)
+ wlc_lcnphy_set_tx_pwr_by_index(pi, tx_gain_index_old);
+ else
+ wlc_lcnphy_disable_tx_gain_override(pi);
- wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
- wlc_lcnphy_rx_gain_override_enable(pi, false);
+ wlc_lcnphy_set_tx_pwr_ctrl(pi, tx_pwr_ctrl);
+ wlc_lcnphy_rx_gain_override_enable(pi, false);
+ }
cal_done:
kfree(ptr);
write_radio_reg(pi, RADIO_2064_REG038, 3);
write_radio_reg(pi, RADIO_2064_REG091, 7);
}
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc,
- 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0};
-
- write_radio_reg(pi, RADIO_2064_REG02A, 0xf);
- write_radio_reg(pi, RADIO_2064_REG091, 0x3);
- write_radio_reg(pi, RADIO_2064_REG038, 0x3);
-
- write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]);
- }
}
static int
} else {
mod_radio_reg(pi, RADIO_2064_REG03A, 1, 0x1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x4, 1<<2);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x10, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x10, 1<<4);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x77);
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, 0xe<<1);
- mod_radio_reg(pi, RADIO_2064_REG112, 0x80, 1<<7);
- mod_radio_reg(pi, RADIO_2064_REG005, 0x7, 1<<1);
- mod_radio_reg(pi, RADIO_2064_REG029, 0xf0, 0<<4);
}
} else {
mod_phy_reg(pi, 0x4d9, (0x1 << 2), (0x1) << 2);
(auxpga_vmid_temp << 0) | (auxpga_gain_temp << 12));
mod_radio_reg(pi, RADIO_2064_REG082, (1 << 5), (1 << 5));
- mod_radio_reg(pi, RADIO_2064_REG07C, (1 << 0), (1 << 0));
}
static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
{
struct phytbl_info tab;
u32 rfseq, ind;
- u8 tssi_sel;
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4);
- if (pi->sh->boardflags & BFL_FEM) {
- tssi_sel = 0x1;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
- } else {
- tssi_sel = 0xe;
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_POST_PA);
- }
+ wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14);
mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15);
mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0);
if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
- mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel);
+ mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe);
mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4);
} else {
- mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1);
mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3);
}
mod_phy_reg(pi, 0x4d7, (0xf << 8), (0) << 8);
- mod_radio_reg(pi, RADIO_2064_REG035, 0xff, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG036, 0x3, 0x0);
- mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 0x8);
-
wlc_lcnphy_pwrctrl_rssiparams(pi);
}
read_radio_reg(pi, RADIO_2064_REG007) & 1;
u16 SAVE_jtag_auxpga = read_radio_reg(pi, RADIO_2064_REG0FF) & 0x10;
u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4;
- u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi);
-
idleTssi = read_phy_reg(pi, 0x4ab);
suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) &
MCTL_EN_MAC));
mod_radio_reg(pi, RADIO_2064_REG0FF, 0x10, 1 << 4);
mod_radio_reg(pi, RADIO_2064_REG11F, 0x4, 1 << 2);
wlc_lcnphy_tssi_setup(pi);
-
- mod_phy_reg(pi, 0x4d7, (0x1 << 0), (1 << 0));
- mod_phy_reg(pi, 0x4d7, (0x1 << 6), (1 << 6));
-
- wlc_lcnphy_set_bbmult(pi, 0x0);
-
wlc_phy_do_dummy_tx(pi, true, OFF);
idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0))
>> 0);
mod_phy_reg(pi, 0x44c, (0x1 << 12), (0) << 12);
- wlc_lcnphy_set_bbmult(pi, SAVE_bbmult);
wlc_lcnphy_set_tx_gain_override(pi, tx_gain_override_old);
wlc_lcnphy_set_tx_gain(pi, &old_gains);
wlc_lcnphy_set_tx_pwr_ctrl(pi, SAVE_txpwrctrl);
wlc_lcnphy_write_table(pi, &tab);
tab.tbl_offset++;
}
- mod_phy_reg(pi, 0x4d0, (0x1 << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 0), (0) << 0);
- mod_phy_reg(pi, 0x4d3, (0xff << 8), (0) << 8);
- mod_phy_reg(pi, 0x4d0, (0x1 << 4), (0) << 4);
- mod_phy_reg(pi, 0x4d0, (0x1 << 2), (0) << 2);
mod_phy_reg(pi, 0x410, (0x1 << 7), (0) << 7);
target_gains.pad_gain = 21;
target_gains.dac_gain = 0;
wlc_lcnphy_set_tx_gain(pi, &target_gains);
+ wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
if (LCNREV_IS(pi->pubpi.phy_rev, 1) || pi_lcn->lcnphy_hw_iqcal_en) {
lcnphy_recal ? LCNPHY_CAL_RECAL :
LCNPHY_CAL_FULL), false);
} else {
- wlc_lcnphy_set_tx_pwr_by_index(pi, 16);
wlc_lcnphy_tx_iqlo_soft_cal_full(pi);
}
if (CHSPEC_IS5G(pi->radio_chanspec))
pa_gain = 0x70;
else
- pa_gain = 0x60;
+ pa_gain = 0x70;
if (pi->sh->boardflags & BFL_FEM)
pa_gain = 0x10;
-
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
tab.tbl_len = 1;
tab.tbl_ptr = &val;
for (j = 0; j < 128; j++) {
- if (pi->sh->boardflags & BFL_FEM)
- gm_gain = gain_table[j].gm;
- else
- gm_gain = 15;
-
+ gm_gain = gain_table[j].gm;
val = (((u32) pa_gain << 24) |
(gain_table[j].pad << 16) |
(gain_table[j].pga << 8) | gm_gain);
write_phy_reg(pi, 0x4ea, 0x4688);
- if (pi->sh->boardflags & BFL_FEM)
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
- else
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0);
+ mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6);
wlc_lcnphy_rcal(pi);
wlc_lcnphy_rc_cal(pi);
-
- if (!(pi->sh->boardflags & BFL_FEM)) {
- write_radio_reg(pi, RADIO_2064_REG032, 0x6f);
- write_radio_reg(pi, RADIO_2064_REG033, 0x19);
- write_radio_reg(pi, RADIO_2064_REG039, 0xe);
- }
-
}
static void wlc_lcnphy_radio_init(struct brcms_phy *pi)
wlc_lcnphy_write_table(pi, &tab);
}
- if (!(pi->sh->boardflags & BFL_FEM)) {
- tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
- tab.tbl_width = 16;
- tab.tbl_ptr = &val;
- tab.tbl_len = 1;
+ tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
+ tab.tbl_width = 16;
+ tab.tbl_ptr = &val;
+ tab.tbl_len = 1;
- val = 150;
- tab.tbl_offset = 0;
- wlc_lcnphy_write_table(pi, &tab);
+ val = 114;
+ tab.tbl_offset = 0;
+ wlc_lcnphy_write_table(pi, &tab);
- val = 220;
- tab.tbl_offset = 1;
- wlc_lcnphy_write_table(pi, &tab);
- }
+ val = 130;
+ tab.tbl_offset = 1;
+ wlc_lcnphy_write_table(pi, &tab);
+
+ val = 6;
+ tab.tbl_offset = 8;
+ wlc_lcnphy_write_table(pi, &tab);
if (CHSPEC_IS2G(pi->radio_chanspec)) {
if (pi->sh->boardflags & BFL_FEM)
wlc_lcnphy_load_tx_iir_filter(pi, true, 3);
mod_phy_reg(pi, 0x4eb, (0x7 << 3), (1) << 3);
- wlc_lcnphy_tssi_setup(pi);
}
void wlc_phy_detach_lcnphy(struct brcms_phy *pi)
if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
return false;
- if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
+ if ((pi->sh->boardflags & BFL_FEM) &&
+ (LCNREV_IS(pi->pubpi.phy_rev, 1))) {
if (pi_lcn->lcnphy_tempsense_option == 3) {
pi->hwpwrctrl = true;
pi->hwpwrctrl_capable = true;
};
static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = {
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
- 0x0009,
0x000a,
- 0x0005,
- 0x0006,
0x0009,
- 0x000a,
- 0x0005,
0x0006,
- 0x0009,
- 0x000a,
0x0005,
- 0x0006,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
+ 0x000a,
0x0009,
+ 0x0006,
+ 0x0005,
0x000a,
+ 0x0009,
+ 0x0006,
0x0005,
+ 0x000a,
+ 0x0009,
0x0006,
+ 0x0005,
};
static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = {
int rate_idx;
int i;
u32 rate;
- u8 use_green = il4965_rs_use_green(il, sta);
+ u8 use_green;
u8 active_tbl = 0;
u8 valid_tx_ant;
struct il_station_priv *sta_priv;
if (!sta || !lq_sta)
return;
+ use_green = il4965_rs_use_green(il, sta);
sta_priv = (void *)sta->drv_priv;
i = lq_sta->last_txrate_idx;
return -EIO;
}
+ /*
+ * This can happen upon FW ASSERT: we clear the STATUS_FW_ERROR flag
+ * in iwl_down but cancel the workers only later.
+ */
+ if (!priv->ucode_loaded) {
+ IWL_ERR(priv, "Fw not loaded - dropping CMD: %x\n", cmd->id);
+ return -EIO;
+ }
+
/*
* Synchronous commands from this op-mode must hold
* the mutex, this ensures we don't try to send two
return -EIO;
}
+ priv->ucode_loaded = true;
+
if (ucode_type != IWL_UCODE_WOWLAN) {
/* delay a bit to give rfkill time to run */
msleep(5);
return ret;
}
- priv->ucode_loaded = true;
-
return 0;
}
/* If platform's RF_KILL switch is NOT set to KILL */
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill && !run_in_rfkill)
return -ERFKILL;
static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
{
+ struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
bool hw_rfkill;
int err;
iwl_enable_rfkill_int(trans);
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
return 0;
* op_mode.
*/
hw_rfkill = iwl_is_rfkill_set(trans);
+ if (hw_rfkill)
+ set_bit(STATUS_RFKILL, &trans_pcie->status);
+ else
+ clear_bit(STATUS_RFKILL, &trans_pcie->status);
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
}
}
for (i = 0; i < IWL_MAX_CMD_TBS_PER_TFD; i++) {
int copy = 0;
- if (!cmd->len)
+ if (!cmd->len[i])
continue;
/* need at least IWL_HCMD_SCRATCHBUF_SIZE copied */
}
memcpy(adapter->upld_buf, skb->data,
min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len));
+ skb_push(skb, INTF_HEADER_LEN);
if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE,
PCI_DMA_FROMDEVICE))
return -1;
static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
static void __iomem *at91_rtc_regs;
static int irq;
-static u32 at91_rtc_imr;
/*
* Decode time/date into rtc_time structure
cr = at91_rtc_read(AT91_RTC_CR);
at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
- at91_rtc_imr |= AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
- at91_rtc_imr &= ~AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_TIMR,
bin2bcd(tm->tm_sec) << 0
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = at91_alarm_year - 1900;
- alrm->enabled = (at91_rtc_imr & AT91_RTC_ALARM)
+ alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
? 1 : 0;
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
tm.tm_sec = alrm->time.tm_sec;
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
- at91_rtc_imr &= ~AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_TIMALR,
bin2bcd(tm.tm_sec) << 0
| bin2bcd(tm.tm_min) << 8
if (alrm->enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
}
if (enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
- } else {
+ } else
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
- at91_rtc_imr &= ~AT91_RTC_ALARM;
- }
return 0;
}
*/
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
{
+ unsigned long imr = at91_rtc_read(AT91_RTC_IMR);
+
seq_printf(seq, "update_IRQ\t: %s\n",
- (at91_rtc_imr & AT91_RTC_ACKUPD) ? "yes" : "no");
+ (imr & AT91_RTC_ACKUPD) ? "yes" : "no");
seq_printf(seq, "periodic_IRQ\t: %s\n",
- (at91_rtc_imr & AT91_RTC_SECEV) ? "yes" : "no");
+ (imr & AT91_RTC_SECEV) ? "yes" : "no");
return 0;
}
unsigned int rtsr;
unsigned long events = 0;
- rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_imr;
+ rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR);
if (rtsr) { /* this interrupt is shared! Is it ours? */
if (rtsr & AT91_RTC_ALARM)
events |= (RTC_AF | RTC_IRQF);
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- at91_rtc_imr = 0;
ret = request_irq(irq, at91_rtc_interrupt,
IRQF_SHARED,
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- at91_rtc_imr = 0;
free_irq(irq, pdev);
rtc_device_unregister(rtc);
/* AT91RM9200 RTC Power management control */
-static u32 at91_rtc_bkpimr;
-
+static u32 at91_rtc_imr;
static int at91_rtc_suspend(struct device *dev)
{
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
- at91_rtc_bkpimr = at91_rtc_imr & (AT91_RTC_ALARM|AT91_RTC_SECEV);
- if (at91_rtc_bkpimr) {
- if (device_may_wakeup(dev)) {
+ at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR)
+ & (AT91_RTC_ALARM|AT91_RTC_SECEV);
+ if (at91_rtc_imr) {
+ if (device_may_wakeup(dev))
enable_irq_wake(irq);
- } else {
- at91_rtc_write(AT91_RTC_IDR, at91_rtc_bkpimr);
- at91_rtc_imr &= ~at91_rtc_bkpimr;
- }
-}
+ else
+ at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr);
+ }
return 0;
}
static int at91_rtc_resume(struct device *dev)
{
- if (at91_rtc_bkpimr) {
- if (device_may_wakeup(dev)) {
+ if (at91_rtc_imr) {
+ if (device_may_wakeup(dev))
disable_irq_wake(irq);
- } else {
- at91_rtc_imr |= at91_rtc_bkpimr;
- at91_rtc_write(AT91_RTC_IER, at91_rtc_bkpimr);
- }
+ else
+ at91_rtc_write(AT91_RTC_IER, at91_rtc_imr);
}
return 0;
}
#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */
#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */
#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */
+#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */
#define AT91_RTC_VER 0x2c /* Valid Entry Register */
#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
case EQC_WR_PROHIBIT:
spin_lock_irqsave(&bdev->lock, flags);
if (bdev->state != SCM_WR_PROHIBIT)
- pr_info("%lu: Write access to the SCM increment is suspended\n",
+ pr_info("%lx: Write access to the SCM increment is suspended\n",
(unsigned long) bdev->scmdev->address);
bdev->state = SCM_WR_PROHIBIT;
spin_unlock_irqrestore(&bdev->lock, flags);
spin_lock_irqsave(&bdev->lock, flags);
if (bdev->state == SCM_WR_PROHIBIT)
- pr_info("%lu: Write access to the SCM increment is restored\n",
+ pr_info("%lx: Write access to the SCM increment is restored\n",
(unsigned long) bdev->scmdev->address);
bdev->state = SCM_OPER;
spin_unlock_irqrestore(&bdev->lock, flags);
goto out;
scm_major = ret;
- if (scm_alloc_rqs(nr_requests))
+ ret = scm_alloc_rqs(nr_requests);
+ if (ret)
goto out_unreg;
scm_debug = debug_register("scm_log", 16, 1, 16);
- if (!scm_debug)
+ if (!scm_debug) {
+ ret = -ENOMEM;
goto out_free;
+ }
debug_register_view(scm_debug, &debug_hex_ascii_view);
debug_set_level(scm_debug, 2);
switch (event) {
case SCM_CHANGE:
- pr_info("%lu: The capabilities of the SCM increment changed\n",
+ pr_info("%lx: The capabilities of the SCM increment changed\n",
(unsigned long) scmdev->address);
SCM_LOG(2, "State changed");
SCM_LOG_STATE(2, scmdev);
int i, rc;
/* Check if the tty3270 is already there. */
- view = raw3270_find_view(&tty3270_fn, tty->index);
+ view = raw3270_find_view(&tty3270_fn, tty->index + RAW3270_FIRSTMINOR);
if (!IS_ERR(view)) {
tp = container_of(view, struct tty3270, view);
tty->driver_data = tp;
tp->inattr = TF_INPUT;
return tty_port_install(&tp->port, driver, tty);
}
- if (tty3270_max_index < tty->index)
- tty3270_max_index = tty->index;
+ if (tty3270_max_index < tty->index + 1)
+ tty3270_max_index = tty->index + 1;
/* Allocate tty3270 structure on first open. */
tp = tty3270_alloc_view();
if (IS_ERR(tp))
return PTR_ERR(tp);
- rc = raw3270_add_view(&tp->view, &tty3270_fn, tty->index);
+ rc = raw3270_add_view(&tp->view, &tty3270_fn,
+ tty->index + RAW3270_FIRSTMINOR);
if (rc) {
tty3270_free_view(tp);
return rc;
void tty3270_create_cb(int minor)
{
- tty_register_device(tty3270_driver, minor, NULL);
+ tty_register_device(tty3270_driver, minor - RAW3270_FIRSTMINOR, NULL);
}
void tty3270_destroy_cb(int minor)
{
- tty_unregister_device(tty3270_driver, minor);
+ tty_unregister_device(tty3270_driver, minor - RAW3270_FIRSTMINOR);
}
struct raw3270_notifier tty3270_notifier =
driver->driver_name = "tty3270";
driver->name = "3270/tty";
driver->major = IBM_TTY3270_MAJOR;
- driver->minor_start = 0;
+ driver->minor_start = RAW3270_FIRSTMINOR;
+ driver->name_base = RAW3270_FIRSTMINOR;
driver->type = TTY_DRIVER_TYPE_SYSTEM;
driver->subtype = SYSTEM_TYPE_TTY;
driver->init_termios = tty_std_termios;
fc_exch_init(lport);
fc_rport_init(lport);
fc_disc_init(lport);
+ fc_disc_config(lport, lport);
return 0;
}
}
ctlr = bnx2fc_to_ctlr(interface);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
interface->vlan_id = vlan_id;
interface->timer_work_queue =
goto ifput_err;
}
- lport = bnx2fc_if_create(interface, &interface->hba->pcidev->dev, 0);
+ lport = bnx2fc_if_create(interface, &cdev->dev, 0);
if (!lport) {
printk(KERN_ERR PFX "Failed to create interface (%s)\n",
netdev->name);
/* Make this master N_port */
ctlr->lp = lport;
- cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
-
if (link_state == BNX2FC_CREATE_LINK_UP)
cdev->enabled = FCOE_CTLR_ENABLED;
else
{
struct net_device *netdev = fcoe->netdev;
struct fcoe_ctlr *fip = fcoe_to_ctlr(fcoe);
- struct fcoe_ctlr_device *ctlr_dev = fcoe_ctlr_to_ctlr_dev(fip);
rtnl_lock();
if (!fcoe->removed)
/* tear-down the FCoE controller */
fcoe_ctlr_destroy(fip);
scsi_host_put(fip->lp->host);
- fcoe_ctlr_device_delete(ctlr_dev);
dev_put(netdev);
module_put(THIS_MODULE);
}
*/
static void fcoe_destroy_work(struct work_struct *work)
{
+ struct fcoe_ctlr_device *cdev;
+ struct fcoe_ctlr *ctlr;
struct fcoe_port *port;
struct fcoe_interface *fcoe;
struct Scsi_Host *shost;
mutex_lock(&fcoe_config_mutex);
fcoe = port->priv;
+ ctlr = fcoe_to_ctlr(fcoe);
+ cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+
fcoe_if_destroy(port->lport);
fcoe_interface_cleanup(fcoe);
mutex_unlock(&fcoe_config_mutex);
+
+ fcoe_ctlr_device_delete(cdev);
}
/**
rc = -EIO;
rtnl_unlock();
fcoe_interface_cleanup(fcoe);
- goto out_nortnl;
+ mutex_unlock(&fcoe_config_mutex);
+ fcoe_ctlr_device_delete(ctlr_dev);
+ goto out;
}
/* Make this the "master" N_Port */
out_nodev:
rtnl_unlock();
-out_nortnl:
mutex_unlock(&fcoe_config_mutex);
+out:
return rc;
}
fc_lport_set_local_id(fip->lp, new_port_id);
}
+/**
+ * fcoe_ctlr_mode_set() - Set or reset the ctlr's mode
+ * @lport: The local port to be (re)configured
+ * @fip: The FCoE controller whose mode is changing
+ * @fip_mode: The new fip mode
+ *
+ * Note that the we shouldn't be changing the libfc discovery settings
+ * (fc_disc_config) while an lport is going through the libfc state
+ * machine. The mode can only be changed when a fcoe_ctlr device is
+ * disabled, so that should ensure that this routine is only called
+ * when nothing is happening.
+ */
+void fcoe_ctlr_mode_set(struct fc_lport *lport, struct fcoe_ctlr *fip,
+ enum fip_state fip_mode)
+{
+ void *priv;
+
+ WARN_ON(lport->state != LPORT_ST_RESET &&
+ lport->state != LPORT_ST_DISABLED);
+
+ if (fip_mode == FIP_MODE_VN2VN) {
+ lport->rport_priv_size = sizeof(struct fcoe_rport);
+ lport->point_to_multipoint = 1;
+ lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
+ lport->tt.disc_start = fcoe_ctlr_disc_start;
+ lport->tt.disc_stop = fcoe_ctlr_disc_stop;
+ lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
+ priv = fip;
+ } else {
+ lport->rport_priv_size = 0;
+ lport->point_to_multipoint = 0;
+ lport->tt.disc_recv_req = NULL;
+ lport->tt.disc_start = NULL;
+ lport->tt.disc_stop = NULL;
+ lport->tt.disc_stop_final = NULL;
+ priv = lport;
+ }
+
+ fc_disc_config(lport, priv);
+}
+
/**
* fcoe_libfc_config() - Sets up libfc related properties for local port
* @lport: The local port to configure libfc for
fc_exch_init(lport);
fc_elsct_init(lport);
fc_lport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN)
- lport->rport_priv_size = sizeof(struct fcoe_rport);
fc_rport_init(lport);
- if (fip->mode == FIP_MODE_VN2VN) {
- lport->point_to_multipoint = 1;
- lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
- lport->tt.disc_start = fcoe_ctlr_disc_start;
- lport->tt.disc_stop = fcoe_ctlr_disc_stop;
- lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
- mutex_init(&lport->disc.disc_mutex);
- INIT_LIST_HEAD(&lport->disc.rports);
- lport->disc.priv = fip;
- } else {
- fc_disc_init(lport);
- }
+ fc_disc_init(lport);
+ fcoe_ctlr_mode_set(lport, fip, fip->mode);
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
{
struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev);
+ struct fc_lport *lport = ctlr->lp;
mutex_lock(&ctlr->ctlr_mutex);
switch (ctlr_dev->mode) {
}
mutex_unlock(&ctlr->ctlr_mutex);
+
+ fcoe_ctlr_mode_set(lport, ctlr, ctlr->mode);
}
EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode);
}
/**
- * fc_disc_init() - Initialize the discovery layer for a local port
- * @lport: The local port that needs the discovery layer to be initialized
+ * fc_disc_config() - Configure the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be configured
+ * @priv: Private data structre for users of the discovery layer
*/
-int fc_disc_init(struct fc_lport *lport)
+void fc_disc_config(struct fc_lport *lport, void *priv)
{
- struct fc_disc *disc;
+ struct fc_disc *disc = &lport->disc;
if (!lport->tt.disc_start)
lport->tt.disc_start = fc_disc_start;
lport->tt.disc_recv_req = fc_disc_recv_req;
disc = &lport->disc;
+
+ disc->priv = priv;
+}
+EXPORT_SYMBOL(fc_disc_config);
+
+/**
+ * fc_disc_init() - Initialize the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be initialized
+ */
+void fc_disc_init(struct fc_lport *lport)
+{
+ struct fc_disc *disc = &lport->disc;
+
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
-
- disc->priv = lport;
-
- return 0;
}
EXPORT_SYMBOL(fc_disc_init);
config SPI_ALTERA
tristate "Altera SPI Controller"
+ depends on GENERIC_HARDIRQS
select SPI_BITBANG
help
This is the driver for the Altera SPI Controller.
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
- depends on ARCH_PXA || PCI || ACPI
+ depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
select PXA_SSP if ARCH_PXA
help
This enables using a PXA2xx or Sodaville SSP port as a SPI master
static int bcm63xx_spi_setup(struct spi_device *spi)
{
struct bcm63xx_spi *bs;
- int ret;
bs = spi_master_get_devdata(spi->master);
default:
dev_err(dev, "unsupported MSG_CTL width: %d\n",
bs->msg_ctl_width);
- goto out_clk_disable;
+ goto out_err;
}
/* Initialize hardware */
for (i = count; i > 0; i--) {
data = tx_buf ? *tx_buf++ : 0;
- if (len == EOFBYTE)
+ if (len == EOFBYTE && t->cs_change)
setbits32(&fifo->txcmd, MPC512x_PSC_FIFO_EOF);
out_8(&fifo->txdata_8, data);
len--;
master->dev.parent = &pdev->dev;
master->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&master->dev, ACPI_HANDLE(&pdev->dev));
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
{
struct s3c64xx_spi_driver_data *sdd = data;
struct spi_master *spi = sdd->master;
- unsigned int val;
+ unsigned int val, clr = 0;
- val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ val = readl(sdd->regs + S3C64XX_SPI_STATUS);
- val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR |
- S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
- S3C64XX_SPI_PND_TX_OVERRUN_CLR |
- S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
-
- writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR);
-
- if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR)
+ if (val & S3C64XX_SPI_ST_RX_OVERRUN_ERR) {
+ clr = S3C64XX_SPI_PND_RX_OVERRUN_CLR;
dev_err(&spi->dev, "RX overrun\n");
- if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_RX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_RX_UNDERRUN_CLR;
dev_err(&spi->dev, "RX underrun\n");
- if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_OVERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_OVERRUN_CLR;
dev_err(&spi->dev, "TX overrun\n");
- if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
dev_err(&spi->dev, "TX underrun\n");
+ }
+
+ /* Clear the pending irq by setting and then clearing it */
+ writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR);
return IRQ_HANDLED;
}
writel(0, regs + S3C64XX_SPI_MODE_CFG);
writel(0, regs + S3C64XX_SPI_PACKET_CNT);
- /* Clear any irq pending bits */
- writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
- regs + S3C64XX_SPI_PENDING_CLR);
+ /* Clear any irq pending bits, should set and clear the bits */
+ val = S3C64XX_SPI_PND_RX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
+ S3C64XX_SPI_PND_TX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
+ writel(val, regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, regs + S3C64XX_SPI_PENDING_CLR);
writel(0, regs + S3C64XX_SPI_SWAP_CFG);
return 0;
}
-static int tegra_slink_prepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- return pm_runtime_get_sync(tspi->dev);
-}
-
-static int tegra_slink_unprepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- pm_runtime_put(tspi->dev);
- return 0;
-}
-
static int tegra_slink_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
msg->status = 0;
msg->actual_length = 0;
+ ret = pm_runtime_get_sync(tspi->dev);
+ if (ret < 0) {
+ dev_err(tspi->dev, "runtime get failed: %d\n", ret);
+ goto done;
+ }
+
single_xfer = list_is_singular(&msg->transfers);
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
INIT_COMPLETION(tspi->xfer_completion);
exit:
tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
+ pm_runtime_put(tspi->dev);
+done:
msg->status = ret;
spi_finalize_current_message(master);
return ret;
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->setup = tegra_slink_setup;
- master->prepare_transfer_hardware = tegra_slink_prepare_transfer;
master->transfer_one_message = tegra_slink_transfer_one_message;
- master->unprepare_transfer_hardware = tegra_slink_unprepare_transfer;
master->num_chipselect = MAX_CHIP_SELECT;
master->bus_num = -1;
/* Lock queue and check for queue work */
spin_lock_irqsave(&master->queue_lock, flags);
if (list_empty(&master->queue) || !master->running) {
- if (master->busy && master->unprepare_transfer_hardware) {
- ret = master->unprepare_transfer_hardware(master);
- if (ret) {
- spin_unlock_irqrestore(&master->queue_lock, flags);
- dev_err(&master->dev,
- "failed to unprepare transfer hardware\n");
- return;
- }
+ if (!master->busy) {
+ spin_unlock_irqrestore(&master->queue_lock, flags);
+ return;
}
master->busy = false;
spin_unlock_irqrestore(&master->queue_lock, flags);
+ if (master->unprepare_transfer_hardware &&
+ master->unprepare_transfer_hardware(master))
+ dev_err(&master->dev,
+ "failed to unprepare transfer hardware\n");
return;
}
acpi_status status;
acpi_handle handle;
- handle = ACPI_HANDLE(&master->dev);
+ handle = ACPI_HANDLE(master->dev.parent);
if (!handle)
return;
{
struct usb_port *port_dev = to_usb_port(dev);
- dev_pm_qos_hide_flags(dev);
kfree(port_dev);
}
fbmode->vmode = 0;
if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+ if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
fbmode->vmode |= FB_VMODE_INTERLACED;
tmp = ((mode->xres & 7) << 24) | ((display_h_total & 7) << 16)
| ((mode->hsync_len & 7) << 8) | (hsync_pos & 7);
lcdc_write_chan(ch, LDHAJR, tmp);
+ lcdc_write_chan_mirror(ch, LDHAJR, tmp);
}
static void sh_mobile_lcdc_overlay_setup(struct sh_mobile_lcdc_overlay *ovl)
err = -ENOMEM;
if (err) {
- platform_device_put(uvesafb_device);
+ if (uvesafb_device)
+ platform_device_put(uvesafb_device);
platform_driver_unregister(&uvesafb_driver);
cn_del_callback(&uvesafb_cn_id);
return err;
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
-fw-shipped-$(CONFIG_INFINIBAND_QIB) += intel/sd7220.fw
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
ess/maestro3_assp_minisrc.fw
ihold(bdev->bd_inode);
return bdev;
}
+EXPORT_SYMBOL(bdgrab);
long nr_blockdev_pages(void)
{
if (split_flag & EXT4_EXT_DATA_VALID1) {
err = ext4_ext_zeroout(inode, ex2);
zero_ex.ee_block = ex2->ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(ex2);
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(ex2));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(ex2));
} else {
err = ext4_ext_zeroout(inode, ex);
zero_ex.ee_block = ex->ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(ex);
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(ex));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(ex));
}
} else {
err = ext4_ext_zeroout(inode, &orig_ex);
zero_ex.ee_block = orig_ex.ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(&orig_ex);
+ zero_ex.ee_len = cpu_to_le16(
+ ext4_ext_get_actual_len(&orig_ex));
ext4_ext_store_pblock(&zero_ex,
ext4_ext_pblock(&orig_ex));
}
if (err)
goto out;
zero_ex.ee_block = ex->ee_block;
- zero_ex.ee_len = ext4_ext_get_actual_len(ex);
+ zero_ex.ee_len = cpu_to_le16(ext4_ext_get_actual_len(ex));
ext4_ext_store_pblock(&zero_ex, ext4_ext_pblock(ex));
err = ext4_ext_get_access(handle, inode, path + depth);
blk = *i_data;
if (level > 0) {
ext4_lblk_t first2;
- bh = sb_bread(inode->i_sb, blk);
+ bh = sb_bread(inode->i_sb, le32_to_cpu(blk));
if (!bh) {
- EXT4_ERROR_INODE_BLOCK(inode, blk,
+ EXT4_ERROR_INODE_BLOCK(inode, le32_to_cpu(blk),
"Read failure");
return -EIO;
}
cmd = F_SETLK;
fl->fl_type = F_UNLCK;
}
- if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
+ if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) {
+ if (fl->fl_type == F_UNLCK)
+ posix_lock_file_wait(file, fl);
return -EIO;
+ }
if (IS_GETLK(cmd))
return dlm_posix_get(ls->ls_dlm, ip->i_no_addr, file, fl);
else if (fl->fl_type == F_UNLCK)
struct dlm_lksb ls_control_lksb; /* control_lock */
char ls_control_lvb[GDLM_LVB_SIZE]; /* control_lock lvb */
struct completion ls_sync_wait; /* {control,mounted}_{lock,unlock} */
+ char *ls_lvb_bits;
spinlock_t ls_recover_spin; /* protects following fields */
unsigned long ls_recover_flags; /* DFL_ */
static int all_jid_bits_clear(char *lvb)
{
- int i;
- for (i = JID_BITMAP_OFFSET; i < GDLM_LVB_SIZE; i++) {
- if (lvb[i])
- return 0;
- }
- return 1;
+ return !memchr_inv(lvb + JID_BITMAP_OFFSET, 0,
+ GDLM_LVB_SIZE - JID_BITMAP_OFFSET);
}
static void sync_wait_cb(void *arg)
{
struct gfs2_sbd *sdp = container_of(work, struct gfs2_sbd, sd_control_work.work);
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t block_gen, start_gen, lvb_gen, flags;
int recover_set = 0;
int write_lvb = 0;
return;
}
- control_lvb_read(ls, &lvb_gen, lvb_bits);
+ control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits);
spin_lock(&ls->ls_recover_spin);
if (block_gen != ls->ls_recover_block ||
ls->ls_recover_result[i] = 0;
- if (!test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET))
+ if (!test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET))
continue;
- __clear_bit_le(i, lvb_bits + JID_BITMAP_OFFSET);
+ __clear_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET);
write_lvb = 1;
}
}
continue;
if (ls->ls_recover_submit[i] < start_gen) {
ls->ls_recover_submit[i] = 0;
- __set_bit_le(i, lvb_bits + JID_BITMAP_OFFSET);
+ __set_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET);
}
}
/* even if there are no bits to set, we need to write the
spin_unlock(&ls->ls_recover_spin);
if (write_lvb) {
- control_lvb_write(ls, start_gen, lvb_bits);
+ control_lvb_write(ls, start_gen, ls->ls_lvb_bits);
flags = DLM_LKF_CONVERT | DLM_LKF_VALBLK;
} else {
flags = DLM_LKF_CONVERT;
*/
for (i = 0; i < recover_size; i++) {
- if (test_bit_le(i, lvb_bits + JID_BITMAP_OFFSET)) {
+ if (test_bit_le(i, ls->ls_lvb_bits + JID_BITMAP_OFFSET)) {
fs_info(sdp, "recover generation %u jid %d\n",
start_gen, i);
gfs2_recover_set(sdp, i);
static int control_mount(struct gfs2_sbd *sdp)
{
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t start_gen, block_gen, mount_gen, lvb_gen;
int mounted_mode;
int retries = 0;
* lvb_gen will be non-zero.
*/
- control_lvb_read(ls, &lvb_gen, lvb_bits);
+ control_lvb_read(ls, &lvb_gen, ls->ls_lvb_bits);
if (lvb_gen == 0xFFFFFFFF) {
/* special value to force mount attempts to fail */
* and all lvb bits to be clear (no pending journal recoveries.)
*/
- if (!all_jid_bits_clear(lvb_bits)) {
+ if (!all_jid_bits_clear(ls->ls_lvb_bits)) {
/* journals need recovery, wait until all are clear */
fs_info(sdp, "control_mount wait for journal recovery\n");
goto restart;
static int control_first_done(struct gfs2_sbd *sdp)
{
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
- char lvb_bits[GDLM_LVB_SIZE];
uint32_t start_gen, block_gen;
int error;
memset(ls->ls_recover_result, 0, ls->ls_recover_size*sizeof(uint32_t));
spin_unlock(&ls->ls_recover_spin);
- memset(lvb_bits, 0, sizeof(lvb_bits));
- control_lvb_write(ls, start_gen, lvb_bits);
+ memset(ls->ls_lvb_bits, 0, GDLM_LVB_SIZE);
+ control_lvb_write(ls, start_gen, ls->ls_lvb_bits);
error = mounted_lock(sdp, DLM_LOCK_PR, DLM_LKF_CONVERT);
if (error)
uint32_t old_size, new_size;
int i, max_jid;
+ if (!ls->ls_lvb_bits) {
+ ls->ls_lvb_bits = kzalloc(GDLM_LVB_SIZE, GFP_NOFS);
+ if (!ls->ls_lvb_bits)
+ return -ENOMEM;
+ }
+
max_jid = 0;
for (i = 0; i < num_slots; i++) {
if (max_jid < slots[i].slot - 1)
static void free_recover_size(struct lm_lockstruct *ls)
{
+ kfree(ls->ls_lvb_bits);
kfree(ls->ls_recover_submit);
kfree(ls->ls_recover_result);
ls->ls_recover_submit = NULL;
ls->ls_recover_size = 0;
ls->ls_recover_submit = NULL;
ls->ls_recover_result = NULL;
+ ls->ls_lvb_bits = NULL;
error = set_recover_size(sdp, NULL, 0);
if (error)
RB_CLEAR_NODE(&ip->i_res->rs_node);
out:
up_write(&ip->i_rw_mutex);
- return 0;
+ return error;
}
static void dump_rs(struct seq_file *seq, const struct gfs2_blkreserv *rs)
const struct gfs2_bitmap *bi, unsigned minlen, u64 *ptrimmed)
{
struct super_block *sb = sdp->sd_vfs;
- struct block_device *bdev = sb->s_bdev;
- const unsigned int sects_per_blk = sdp->sd_sb.sb_bsize /
- bdev_logical_block_size(sb->s_bdev);
u64 blk;
sector_t start = 0;
- sector_t nr_sects = 0;
+ sector_t nr_blks = 0;
int rv;
unsigned int x;
u32 trimmed = 0;
if (diff == 0)
continue;
blk = offset + ((bi->bi_start + x) * GFS2_NBBY);
- blk *= sects_per_blk; /* convert to sectors */
while(diff) {
if (diff & 1) {
- if (nr_sects == 0)
+ if (nr_blks == 0)
goto start_new_extent;
- if ((start + nr_sects) != blk) {
- if (nr_sects >= minlen) {
- rv = blkdev_issue_discard(bdev,
- start, nr_sects,
+ if ((start + nr_blks) != blk) {
+ if (nr_blks >= minlen) {
+ rv = sb_issue_discard(sb,
+ start, nr_blks,
GFP_NOFS, 0);
if (rv)
goto fail;
- trimmed += nr_sects;
+ trimmed += nr_blks;
}
- nr_sects = 0;
+ nr_blks = 0;
start_new_extent:
start = blk;
}
- nr_sects += sects_per_blk;
+ nr_blks++;
}
diff >>= 2;
- blk += sects_per_blk;
+ blk++;
}
}
- if (nr_sects >= minlen) {
- rv = blkdev_issue_discard(bdev, start, nr_sects, GFP_NOFS, 0);
+ if (nr_blks >= minlen) {
+ rv = sb_issue_discard(sb, start, nr_blks, GFP_NOFS, 0);
if (rv)
goto fail;
- trimmed += nr_sects;
+ trimmed += nr_blks;
}
if (ptrimmed)
*ptrimmed = trimmed;
iattr->ia_valid |= ATTR_SIZE;
}
if (bmval[0] & FATTR4_WORD0_ACL) {
- int nace;
+ u32 nace;
struct nfs4_ace *ace;
READ_BUF(4); len += 4;
if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
return -ENOSPC;
- if (name[0] == '.' && (name[1] == '\0' ||
- (name[1] == '.' && name[2] == '\0')))
+ if (name[0] == '.' && (namelen < 2 ||
+ (namelen == 2 && name[1] == '.')))
return 0;
dentry = lookup_one_len(name, dbuf->xadir, namelen);
c->remounting_rw = 1;
c->ro_mount = 0;
+ if (c->space_fixup) {
+ err = ubifs_fixup_free_space(c);
+ if (err)
+ return err;
+ }
+
err = check_free_space(c);
if (err)
goto out;
err = dbg_check_space_info(c);
}
- if (c->space_fixup) {
- err = ubifs_fixup_free_space(c);
- if (err)
- goto out;
- }
-
mutex_unlock(&c->umount_mutex);
return err;
} compat_sigset_t;
struct compat_sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
compat_uptr_t sa_handler;
compat_ulong_t sa_flags;
#else
- compat_ulong_t sa_flags;
+ compat_uint_t sa_flags;
compat_uptr_t sa_handler;
#endif
#ifdef __ARCH_HAS_SA_RESTORER
#endif
#else /* !CONFIG_PM_DEVFREQ */
-static struct devfreq *devfreq_add_device(struct device *dev,
+static inline struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
return NULL;
}
-static int devfreq_remove_device(struct devfreq *devfreq)
+static inline int devfreq_remove_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_suspend_device(struct devfreq *devfreq)
+static inline int devfreq_suspend_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_resume_device(struct devfreq *devfreq)
+static inline int devfreq_resume_device(struct devfreq *devfreq)
{
return 0;
}
-static struct opp *devfreq_recommended_opp(struct device *dev,
+static inline struct opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
-static int devfreq_register_opp_notifier(struct device *dev,
+static inline int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
-static int devfreq_unregister_opp_notifier(struct device *dev,
+static inline int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
*
* int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh)
* int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq,
- * struct net_device *dev)
+ * struct net_device *dev, u32 filter_mask)
*
* int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
* Called to change device carrier. Soft-devices (like dummy, team, etc)
extern int sigsuspend(sigset_t *);
struct sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
__sighandler_t sa_handler;
unsigned long sa_flags;
#else
- unsigned long sa_flags;
+ unsigned int sa_flags;
__sighandler_t sa_handler;
#endif
#ifdef __ARCH_HAS_SA_RESTORER
/*
* DISCOVERY LAYER
*****************************/
-int fc_disc_init(struct fc_lport *);
+void fc_disc_init(struct fc_lport *);
+void fc_disc_config(struct fc_lport *, void *);
static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
{
/* status */
u32 connect:1; /* source and sink widgets are connected */
u32 walked:1; /* path has been walked */
+ u32 walking:1; /* path is in the process of being walked */
u32 weak:1; /* path ignored for power management */
int (*connected)(struct snd_soc_dapm_widget *source,
goto out_unlock;
break;
}
+ msg = ERR_PTR(-EAGAIN);
} else
break;
msg_counter++;
/* Check the cache first. */
/* (Cache hit rate is typically around 35%.) */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (!(vma && vma->vm_end > addr && vma->vm_start <= addr)) {
struct rb_node *rb_node;
struct vm_area_struct *vma;
/* check the cache first */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (vma && vma->vm_start <= addr && vma->vm_end > addr)
return vma;
}
skb_orphan(skb);
- nf_reset(skb);
if (unlikely(!is_skb_forwardable(dev, skb))) {
atomic_long_inc(&dev->rx_dropped);
if (dev->rx_handler)
return -EBUSY;
+ /* Note: rx_handler_data must be set before rx_handler */
rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
rcu_assign_pointer(dev->rx_handler, rx_handler);
ASSERT_RTNL();
RCU_INIT_POINTER(dev->rx_handler, NULL);
+ /* a reader seeing a non NULL rx_handler in a rcu_read_lock()
+ * section has a guarantee to see a non NULL rx_handler_data
+ * as well.
+ */
+ synchronize_net();
RCU_INIT_POINTER(dev->rx_handler_data, NULL);
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
struct flow_flush_info *info = data;
struct tasklet_struct *tasklet;
- tasklet = this_cpu_ptr(&info->cache->percpu->flush_tasklet);
+ tasklet = &this_cpu_ptr(info->cache->percpu)->flush_tasklet;
tasklet->data = (unsigned long)info;
tasklet_schedule(tasklet);
}
}
if (ops->fill_info) {
data = nla_nest_start(skb, IFLA_INFO_DATA);
- if (data == NULL)
+ if (data == NULL) {
+ err = -EMSGSIZE;
goto err_cancel_link;
+ }
err = ops->fill_info(skb, dev);
if (err < 0)
goto err_cancel_data;
static void init_loopback(struct net_device *dev)
{
struct inet6_dev *idev;
+ struct net_device *sp_dev;
+ struct inet6_ifaddr *sp_ifa;
+ struct rt6_info *sp_rt;
/* ::1 */
}
add_addr(idev, &in6addr_loopback, 128, IFA_HOST);
+
+ /* Add routes to other interface's IPv6 addresses */
+ for_each_netdev(dev_net(dev), sp_dev) {
+ if (!strcmp(sp_dev->name, dev->name))
+ continue;
+
+ idev = __in6_dev_get(sp_dev);
+ if (!idev)
+ continue;
+
+ read_lock_bh(&idev->lock);
+ list_for_each_entry(sp_ifa, &idev->addr_list, if_list) {
+
+ if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE))
+ continue;
+
+ sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0);
+
+ /* Failure cases are ignored */
+ if (!IS_ERR(sp_rt))
+ ip6_ins_rt(sp_rt);
+ }
+ read_unlock_bh(&idev->lock);
+ }
}
static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr)
ipv6_addr_loopback(&hdr->daddr))
goto err;
+ /* RFC4291 Errata ID: 3480
+ * Interface-Local scope spans only a single interface on a
+ * node and is useful only for loopback transmission of
+ * multicast. Packets with interface-local scope received
+ * from another node must be discarded.
+ */
+ if (!(skb->pkt_type == PACKET_LOOPBACK ||
+ dev->flags & IFF_LOOPBACK) &&
+ ipv6_addr_is_multicast(&hdr->daddr) &&
+ IPV6_ADDR_MC_SCOPE(&hdr->daddr) == 1)
+ goto err;
+
/* RFC4291 2.7
* Nodes must not originate a packet to a multicast address whose scope
* field contains the reserved value 0; if such a packet is received, it
hdr->sadb_msg_pid = c->portid;
hdr->sadb_msg_version = PF_KEY_V2;
hdr->sadb_msg_errno = (uint8_t) 0;
+ hdr->sadb_msg_satype = SADB_SATYPE_UNSPEC;
hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
return 0;
static int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
- int ret = 0;
+ int ret;
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return 0;
- mutex_lock(&local->iflist_mtx);
+ ASSERT_RTNL();
if (local->monitor_sdata)
- goto out_unlock;
+ return 0;
sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
- if (!sdata) {
- ret = -ENOMEM;
- goto out_unlock;
- }
+ if (!sdata)
+ return -ENOMEM;
/* set up data */
sdata->local = local;
if (WARN_ON(ret)) {
/* ok .. stupid driver, it asked for this! */
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_check_queues(sdata);
if (ret) {
kfree(sdata);
- goto out_unlock;
+ return ret;
}
ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef,
if (ret) {
drv_remove_interface(local, sdata);
kfree(sdata);
- goto out_unlock;
+ return ret;
}
+ mutex_lock(&local->iflist_mtx);
rcu_assign_pointer(local->monitor_sdata, sdata);
- out_unlock:
mutex_unlock(&local->iflist_mtx);
- return ret;
+
+ return 0;
}
static void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
return;
+ ASSERT_RTNL();
+
mutex_lock(&local->iflist_mtx);
sdata = rcu_dereference_protected(local->monitor_sdata,
lockdep_is_held(&local->iflist_mtx));
- if (!sdata)
- goto out_unlock;
+ if (!sdata) {
+ mutex_unlock(&local->iflist_mtx);
+ return;
+ }
rcu_assign_pointer(local->monitor_sdata, NULL);
+ mutex_unlock(&local->iflist_mtx);
+
synchronize_net();
ieee80211_vif_release_channel(sdata);
drv_remove_interface(local, sdata);
kfree(sdata);
- out_unlock:
- mutex_unlock(&local->iflist_mtx);
}
/*
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list)
- if (ieee80211_vif_is_mesh(&sdata->vif))
+ if (ieee80211_vif_is_mesh(&sdata->vif) &&
+ ieee80211_sdata_running(sdata))
ieee80211_queue_work(&local->hw, &sdata->work);
rcu_read_unlock();
}
/* Restart STA timers */
rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list)
- ieee80211_restart_sta_timer(sdata);
+ list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (ieee80211_sdata_running(sdata))
+ ieee80211_restart_sta_timer(sdata);
+ }
rcu_read_unlock();
}
memset(nskb->cb, 0, sizeof(nskb->cb));
- ieee80211_tx_skb(rx->sdata, nskb);
+ if (rx->sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(nskb);
+
+ info->flags = IEEE80211_TX_CTL_TX_OFFCHAN |
+ IEEE80211_TX_INTFL_OFFCHAN_TX_OK |
+ IEEE80211_TX_CTL_NO_CCK_RATE;
+ if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
+ info->hw_queue =
+ local->hw.offchannel_tx_hw_queue;
+ }
+
+ __ieee80211_tx_skb_tid_band(rx->sdata, nskb, 7,
+ status->band);
}
dev_kfree_skb(rx->skb);
return RX_QUEUED;
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
int ret, i;
+ bool have_key = false;
might_sleep();
list_del_rcu(&sta->list);
mutex_lock(&local->key_mtx);
- for (i = 0; i < NUM_DEFAULT_KEYS; i++)
+ for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
__ieee80211_key_free(key_mtx_dereference(local, sta->gtk[i]));
- if (sta->ptk)
+ have_key = true;
+ }
+ if (sta->ptk) {
__ieee80211_key_free(key_mtx_dereference(local, sta->ptk));
+ have_key = true;
+ }
mutex_unlock(&local->key_mtx);
+ if (!have_key)
+ synchronize_net();
+
sta->dead = true;
local->num_sta--;
cbq_update(q);
if ((incr -= incr2) < 0)
incr = 0;
+ q->now += incr;
+ } else {
+ if (now > q->now)
+ q->now = now;
}
- q->now += incr;
q->now_rt = now;
for (;;) {
flow->deficit = q->quantum;
flow->dropped = 0;
}
- if (++sch->q.qlen < sch->limit)
+ if (++sch->q.qlen <= sch->limit)
return NET_XMIT_SUCCESS;
q->drop_overlimit++;
u64 mult;
int shift;
- r->rate_bps = rate << 3;
+ r->rate_bps = (u64)rate << 3;
r->shift = 0;
r->mult = 1;
/*
struct vsock_sock *vsk;
list_for_each_entry(vsk, vsock_bound_sockets(addr), bound_table)
- if (vsock_addr_equals_addr_any(addr, &vsk->local_addr))
+ if (addr->svm_port == vsk->local_addr.svm_port)
return sk_vsock(vsk);
return NULL;
list_for_each_entry(vsk, vsock_connected_sockets(src, dst),
connected_table) {
- if (vsock_addr_equals_addr(src, &vsk->remote_addr)
- && vsock_addr_equals_addr(dst, &vsk->local_addr)) {
+ if (vsock_addr_equals_addr(src, &vsk->remote_addr) &&
+ dst->svm_port == vsk->local_addr.svm_port) {
return sk_vsock(vsk);
}
}
struct vsock_sock *vlistener;
struct vsock_sock *vpending;
struct sock *pending;
+ struct sockaddr_vm src;
+
+ vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
vlistener = vsock_sk(listener);
list_for_each_entry(vpending, &vlistener->pending_links,
pending_links) {
- struct sockaddr_vm src;
- struct sockaddr_vm dst;
-
- vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
- vsock_addr_init(&dst, pkt->dg.dst.context, pkt->dst_port);
-
if (vsock_addr_equals_addr(&src, &vpending->remote_addr) &&
- vsock_addr_equals_addr(&dst, &vpending->local_addr)) {
+ pkt->dst_port == vpending->local_addr.svm_port) {
pending = sk_vsock(vpending);
sock_hold(pending);
goto found;
*/
bh_lock_sock(sk);
- if (!sock_owned_by_user(sk) && sk->sk_state == SS_CONNECTED)
- vmci_trans(vsk)->notify_ops->handle_notify_pkt(
- sk, pkt, true, &dst, &src,
- &bh_process_pkt);
+ if (!sock_owned_by_user(sk)) {
+ /* The local context ID may be out of date, update it. */
+ vsk->local_addr.svm_cid = dst.svm_cid;
+
+ if (sk->sk_state == SS_CONNECTED)
+ vmci_trans(vsk)->notify_ops->handle_notify_pkt(
+ sk, pkt, true, &dst, &src,
+ &bh_process_pkt);
+ }
bh_unlock_sock(sk);
lock_sock(sk);
+ /* The local context ID may be out of date. */
+ vsock_sk(sk)->local_addr.svm_cid = pkt->dg.dst.context;
+
switch (sk->sk_state) {
case SS_LISTEN:
vmci_transport_recv_listen(sk, pkt);
pending = vmci_transport_get_pending(sk, pkt);
if (pending) {
lock_sock(pending);
+
+ /* The local context ID may be out of date. */
+ vsock_sk(pending)->local_addr.svm_cid = pkt->dg.dst.context;
+
switch (pending->sk_state) {
case SS_CONNECTING:
err = vmci_transport_recv_connecting_server(sk,
}
EXPORT_SYMBOL_GPL(vsock_addr_equals_addr);
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
- const struct sockaddr_vm *other)
-{
- return (addr->svm_cid == VMADDR_CID_ANY ||
- other->svm_cid == VMADDR_CID_ANY ||
- addr->svm_cid == other->svm_cid) &&
- addr->svm_port == other->svm_port;
-}
-EXPORT_SYMBOL_GPL(vsock_addr_equals_addr_any);
-
int vsock_addr_cast(const struct sockaddr *addr,
size_t len, struct sockaddr_vm **out_addr)
{
void vsock_addr_unbind(struct sockaddr_vm *addr);
bool vsock_addr_equals_addr(const struct sockaddr_vm *addr,
const struct sockaddr_vm *other);
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
- const struct sockaddr_vm *other);
int vsock_addr_cast(const struct sockaddr *addr, size_t len,
struct sockaddr_vm **out_addr);
rdev_rfkill_poll(rdev);
}
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev)
+{
+ lockdep_assert_held(&rdev->devlist_mtx);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
+
+ if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
+ return;
+
+ if (!wdev->p2p_started)
+ return;
+
+ rdev_stop_p2p_device(rdev, wdev);
+ wdev->p2p_started = false;
+
+ rdev->opencount--;
+
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ bool busy = work_busy(&rdev->scan_done_wk);
+
+ /*
+ * If the work isn't pending or running (in which case it would
+ * be waiting for the lock we hold) the driver didn't properly
+ * cancel the scan when the interface was removed. In this case
+ * warn and leak the scan request object to not crash later.
+ */
+ WARN_ON(!busy);
+
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, !busy);
+ }
+}
+
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *rdev = data;
return 0;
rtnl_lock();
- mutex_lock(&rdev->devlist_mtx);
+
+ /* read-only iteration need not hold the devlist_mtx */
list_for_each_entry(wdev, &rdev->wdev_list, list) {
if (wdev->netdev) {
/* otherwise, check iftype */
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ /* but this requires it */
+ mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
+ mutex_unlock(&rdev->devlist_mtx);
break;
default:
break;
}
}
- mutex_unlock(&rdev->devlist_mtx);
rtnl_unlock();
return 0;
wdev = container_of(work, struct wireless_dev, cleanup_work);
rdev = wiphy_to_dev(wdev->wiphy);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
rdev->scan_req->aborted = true;
___cfg80211_scan_done(rdev, true);
}
- cfg80211_unlock_rdev(rdev);
-
- mutex_lock(&rdev->sched_scan_mtx);
-
if (WARN_ON(rdev->sched_scan_req &&
rdev->sched_scan_req->dev == wdev->netdev)) {
__cfg80211_stop_sched_scan(rdev, false);
return;
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
list_del_rcu(&wdev->list);
rdev->devlist_generation++;
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
- if (!wdev->p2p_started)
- break;
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
- rdev->opencount--;
+ cfg80211_stop_p2p_device(rdev, wdev);
break;
default:
WARN_ON_ONCE(1);
break;
}
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
}
EXPORT_SYMBOL(cfg80211_unregister_wdev);
cfg80211_update_iface_num(rdev, wdev->iftype, 1);
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
switch (wdev->iftype) {
#ifdef CONFIG_CFG80211_WEXT
break;
}
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
rdev->opencount++;
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
enum nl80211_iftype iftype, int num);
+void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev);
+
#define CFG80211_MAX_NUM_DIFFERENT_CHANNELS 10
#ifdef CONFIG_CFG80211_DEVELOPER_WARNINGS
if (!rdev->ops->scan)
return -EOPNOTSUPP;
- if (rdev->scan_req)
- return -EBUSY;
+ mutex_lock(&rdev->sched_scan_mtx);
+ if (rdev->scan_req) {
+ err = -EBUSY;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
- if (!n_channels)
- return -EINVAL;
+ if (!n_channels) {
+ err = -EINVAL;
+ goto unlock;
+ }
} else {
enum ieee80211_band band;
n_channels = 0;
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp)
n_ssids++;
- if (n_ssids > wiphy->max_scan_ssids)
- return -EINVAL;
+ if (n_ssids > wiphy->max_scan_ssids) {
+ err = -EINVAL;
+ goto unlock;
+ }
if (info->attrs[NL80211_ATTR_IE])
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
else
ie_len = 0;
- if (ie_len > wiphy->max_scan_ie_len)
- return -EINVAL;
+ if (ie_len > wiphy->max_scan_ie_len) {
+ err = -EINVAL;
+ goto unlock;
+ }
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
- if (!request)
- return -ENOMEM;
+ if (!request) {
+ err = -ENOMEM;
+ goto unlock;
+ }
if (n_ssids)
request->ssids = (void *)&request->channels[n_channels];
kfree(request);
}
+ unlock:
+ mutex_unlock(&rdev->sched_scan_mtx);
return err;
}
if (!rdev->ops->stop_p2p_device)
return -EOPNOTSUPP;
- if (!wdev->p2p_started)
- return 0;
-
- rdev_stop_p2p_device(rdev, wdev);
- wdev->p2p_started = false;
-
- mutex_lock(&rdev->devlist_mtx);
- rdev->opencount--;
- mutex_unlock(&rdev->devlist_mtx);
-
- if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
- rdev->scan_req->aborted = true;
- ___cfg80211_scan_done(rdev, true);
- }
+ mutex_lock(&rdev->sched_scan_mtx);
+ cfg80211_stop_p2p_device(rdev, wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
return 0;
}
struct nlattr *nest;
int i;
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (WARN_ON(!req))
return 0;
union iwreq_data wrqu;
#endif
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
request = rdev->scan_req;
rdev = container_of(wk, struct cfg80211_registered_device,
scan_done_wk);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
___cfg80211_scan_done(rdev, false);
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
}
void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
found = rb_find_bss(dev, tmp, BSS_CMP_REGULAR);
if (found) {
- found->pub.beacon_interval = tmp->pub.beacon_interval;
- found->pub.signal = tmp->pub.signal;
- found->pub.capability = tmp->pub.capability;
- found->ts = tmp->ts;
-
/* Update IEs */
if (rcu_access_pointer(tmp->pub.proberesp_ies)) {
const struct cfg80211_bss_ies *old;
if (found->pub.hidden_beacon_bss &&
!list_empty(&found->hidden_list)) {
+ const struct cfg80211_bss_ies *f;
+
/*
* The found BSS struct is one of the probe
* response members of a group, but we're
* SSID to showing it, which is confusing so
* drop this information.
*/
+
+ f = rcu_access_pointer(tmp->pub.beacon_ies);
+ kfree_rcu((struct cfg80211_bss_ies *)f,
+ rcu_head);
goto drop;
}
kfree_rcu((struct cfg80211_bss_ies *)old,
rcu_head);
}
+
+ found->pub.beacon_interval = tmp->pub.beacon_interval;
+ found->pub.signal = tmp->pub.signal;
+ found->pub.capability = tmp->pub.capability;
+ found->ts = tmp->ts;
} else {
struct cfg80211_internal_bss *new;
struct cfg80211_internal_bss *hidden;
if (IS_ERR(rdev))
return PTR_ERR(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
if (rdev->scan_req) {
err = -EBUSY;
goto out;
dev_hold(dev);
}
out:
+ mutex_unlock(&rdev->sched_scan_mtx);
kfree(creq);
cfg80211_unlock_rdev(rdev);
return err;
ASSERT_RTNL();
ASSERT_RDEV_LOCK(rdev);
ASSERT_WDEV_LOCK(wdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (rdev->scan_req)
return -EBUSY;
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
- mutex_lock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
wdev_lock(wdev);
__cfg80211_sme_scan_done(dev);
wdev_unlock(wdev);
- mutex_unlock(&wiphy_to_dev(wdev->wiphy)->devlist_mtx);
}
void cfg80211_sme_rx_auth(struct net_device *dev,
int err;
mutex_lock(&rdev->devlist_mtx);
+ /* might request scan - scan_mtx -> wdev_mtx dependency */
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(dev->ieee80211_ptr);
err = __cfg80211_connect(rdev, dev, connect, connkeys, NULL);
wdev_unlock(dev->ieee80211_ptr);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
return err;
#define WIPHY_PR_ARG __entry->wiphy_name
#define WDEV_ENTRY __field(u32, id)
-#define WDEV_ASSIGN (__entry->id) = (wdev ? wdev->identifier : 0)
+#define WDEV_ASSIGN (__entry->id) = (!IS_ERR_OR_NULL(wdev) \
+ ? wdev->identifier : 0)
#define WDEV_PR_FMT "wdev(%u)"
#define WDEV_PR_ARG (__entry->id)
),
TP_fast_assign(
WIPHY_ASSIGN;
- WIPHY_ASSIGN;
+ NETDEV_ASSIGN;
__entry->acl_policy = params->acl_policy;
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", acl policy: %d",
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
err = 0;
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
cfg80211_lock_rdev(rdev);
mutex_lock(&rdev->devlist_mtx);
+ mutex_lock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
if (wdev->sme_state != CFG80211_SME_IDLE) {
err = cfg80211_mgd_wext_connect(rdev, wdev);
out:
wdev_unlock(wdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_unlock(&rdev->devlist_mtx);
cfg80211_unlock_rdev(rdev);
return err;
x->xflags &= ~XFRM_TIME_DEFER;
}
+static void xfrm_replay_notify_esn(struct xfrm_state *x, int event)
+{
+ u32 seq_diff, oseq_diff;
+ struct km_event c;
+ struct xfrm_replay_state_esn *replay_esn = x->replay_esn;
+ struct xfrm_replay_state_esn *preplay_esn = x->preplay_esn;
+
+ /* we send notify messages in case
+ * 1. we updated on of the sequence numbers, and the seqno difference
+ * is at least x->replay_maxdiff, in this case we also update the
+ * timeout of our timer function
+ * 2. if x->replay_maxage has elapsed since last update,
+ * and there were changes
+ *
+ * The state structure must be locked!
+ */
+
+ switch (event) {
+ case XFRM_REPLAY_UPDATE:
+ if (!x->replay_maxdiff)
+ break;
+
+ if (replay_esn->seq_hi == preplay_esn->seq_hi)
+ seq_diff = replay_esn->seq - preplay_esn->seq;
+ else
+ seq_diff = ~preplay_esn->seq + replay_esn->seq + 1;
+
+ if (replay_esn->oseq_hi == preplay_esn->oseq_hi)
+ oseq_diff = replay_esn->oseq - preplay_esn->oseq;
+ else
+ oseq_diff = ~preplay_esn->oseq + replay_esn->oseq + 1;
+
+ if (seq_diff < x->replay_maxdiff &&
+ oseq_diff < x->replay_maxdiff) {
+
+ if (x->xflags & XFRM_TIME_DEFER)
+ event = XFRM_REPLAY_TIMEOUT;
+ else
+ return;
+ }
+
+ break;
+
+ case XFRM_REPLAY_TIMEOUT:
+ if (memcmp(x->replay_esn, x->preplay_esn,
+ xfrm_replay_state_esn_len(replay_esn)) == 0) {
+ x->xflags |= XFRM_TIME_DEFER;
+ return;
+ }
+
+ break;
+ }
+
+ memcpy(x->preplay_esn, x->replay_esn,
+ xfrm_replay_state_esn_len(replay_esn));
+ c.event = XFRM_MSG_NEWAE;
+ c.data.aevent = event;
+ km_state_notify(x, &c);
+
+ if (x->replay_maxage &&
+ !mod_timer(&x->rtimer, jiffies + x->replay_maxage))
+ x->xflags &= ~XFRM_TIME_DEFER;
+}
+
static int xfrm_replay_overflow_esn(struct xfrm_state *x, struct sk_buff *skb)
{
int err = 0;
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
.recheck = xfrm_replay_recheck_esn,
- .notify = xfrm_replay_notify_bmp,
+ .notify = xfrm_replay_notify_esn,
.overflow = xfrm_replay_overflow_esn,
};
"Line Out", "Speaker", "HP Out", "CD",
"SPDIF Out", "Digital Out", "Modem Line", "Modem Hand",
"Line In", "Aux", "Mic", "Telephony",
- "SPDIF In", "Digitial In", "Reserved", "Other"
+ "SPDIF In", "Digital In", "Reserved", "Other"
};
return jack_types[(cfg & AC_DEFCFG_DEVICE)
unsigned char *buf, int *eld_size)
{
int i;
- int ret;
+ int ret = 0;
int size;
/*
static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path)
{
struct hda_gen_spec *spec = codec->spec;
- bool changed;
+ bool changed = false;
int i;
if (!spec->power_down_unused || path->active)
* this may give more power-saving, but will take longer time to
* wake up.
*/
-static int power_save_controller = -1;
-module_param(power_save_controller, bint, 0644);
+static bool power_save_controller = 1;
+module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#endif /* CONFIG_PM */
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (power_save_controller > 0)
- return 0;
if (!power_save_controller ||
!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EBUSY;
_snd_printd(SND_PR_VERBOSE,
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid);
if (eld->eld_valid) {
if (snd_hdmi_get_eld(codec, pin_nid, eld->eld_buffer,
const hda_nid_t *ssids;
if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
- codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
+ codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670 ||
+ codec->vendor_id == 0x10ec0671)
ssids = alc663_ssids;
else
ssids = alc662_ssids;
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
{ .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
+ { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 },
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
width = SI476X_PCM_FORMAT_S8;
+ break;
case SNDRV_PCM_FORMAT_S16_LE:
width = SI476X_PCM_FORMAT_S16_LE;
break;
&buf_list);
if (!buf) {
adsp_err(dsp, "Out of memory\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_fw;
}
adsp_dbg(dsp, "%s.%d: Writing %d bytes at %x\n",
wm_adsp_buf_free(&buf_list);
out:
kfree(file);
- return 0;
+ return ret;
}
int wm_adsp1_init(struct wm_adsp *adsp)
if (imx_ssi->ac97_reset)
imx_ssi->ac97_reset(ac97);
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
if (imx_ssi->ac97_warm_reset)
imx_ssi->ac97_warm_reset(ac97);
+
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.num_links = ARRAY_SIZE(pcm030_fabric_dai),
};
-static int __init pcm030_fabric_probe(struct platform_device *op)
+static int pcm030_fabric_probe(struct platform_device *op)
{
struct device_node *np = op->dev.of_node;
struct device_node *platform_np;
return 0;
}
-static struct snd_soc_platform sh7760_soc_platform = {
- .pcm_ops = &camelot_pcm_ops,
+static struct snd_soc_platform_driver sh7760_soc_platform = {
+ .ops = &camelot_pcm_ops,
.pcm_new = camelot_pcm_new,
.pcm_free = camelot_pcm_free,
};
if (params->mask) {
ret = regmap_read(codec->control_data, params->base, &val);
if (ret != 0)
- return ret;
+ goto out;
val &= params->mask;
((u32 *)data)[0] |= cpu_to_be32(val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
}
ret = regmap_raw_write(codec->control_data, params->base,
data, len);
+out:
kfree(data);
return ret;
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, 2 * i, ret);
- kfree(routes);
return -EINVAL;
}
ret = of_property_read_string_index(np, propname,
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, (2 * i) + 1, ret);
- kfree(routes);
return -EINVAL;
}
}
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
if (path->sink && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_output_ep(path->sink, list);
+
+ path->walking = 0;
}
}
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
if (path->source && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_input_ep(path->source, list);
+
+ path->walking = 0;
}
}
static u64 spear_pcm_dmamask = DMA_BIT_MASK(32);
-static int spear_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai, struct snd_pcm *pcm)
+static int spear_pcm_new(struct snd_soc_pcm_runtime *rtd)
{
+ struct snd_card *card = rtd->card->snd_card;
int ret;
if (!card->dev->dma_mask)
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
- if (dai->driver->playback.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->playback.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_PLAYBACK,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
return ret;
}
- if (dai->driver->capture.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->capture.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_CAPTURE,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
{
struct usb_device *dev = chip->dev;
unsigned char data[4];
- int err, crate;
+ int err, cur_rate, prev_rate;
int clock = snd_usb_clock_find_source(chip, fmt->clock);
if (clock < 0)
return -ENXIO;
}
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ prev_rate = 0;
+ } else {
+ prev_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+ }
+
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
return err;
}
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8,
- snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data))) < 0) {
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
- return err;
+ cur_rate = 0;
+ } else {
+ cur_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
}
- crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
- if (crate != rate)
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ if (cur_rate != rate) {
+ snd_printd(KERN_WARNING
+ "current rate %d is different from the runtime rate %d\n",
+ cur_rate, rate);
+ }
+
+ /* Some devices doesn't respond to sample rate changes while the
+ * interface is active. */
+ if (rate != prev_rate) {
+ usb_set_interface(dev, iface, 0);
+ usb_set_interface(dev, iface, fmt->altsetting);
+ }
return 0;
}
projects / karo-tx-linux.git / commitdiff