ARM: debug: qcom: make UART address selection configuration option

Separate Qualcomm low-level debugging UART to two options.

DEBUG_MSM_UART is used in earlier non-multi platform arches,
like MSM7X00A, QSD8X50 and MSM7X30.

DEBUG_QCOM_UARTDM is used in multi-plafrom arches and have
embedded data mover.

Make DEBUG_UART_PHYS and DEBUG_UART_BASE user adjustable by
Kconfig menu.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 4a2fc0bf6fc913683c29bc2113b85b1f3db9bdd3..cdbfd8b0efc77c55088a4bdbef1a547e8d03710d 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -349,56 +349,39 @@ choice
                  Say Y here if you want kernel low-level debugging support
                  on MMP UART3.
 
-       config DEBUG_MSM_UART1
-               bool "Kernel low-level debugging messages via MSM UART1"
-               depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-               select DEBUG_MSM_UART
+       config DEBUG_MSM_UART
+               bool "Kernel low-level debugging messages via MSM UART"
+               depends on ARCH_MSM
                help
                  Say Y here if you want the debug print routines to direct
-                 their output to the first serial port on MSM devices.
+                 their output to the serial port on MSM devices.
 
-       config DEBUG_MSM_UART2
-               bool "Kernel low-level debugging messages via MSM UART2"
-               depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-               select DEBUG_MSM_UART
-               help
-                 Say Y here if you want the debug print routines to direct
-                 their output to the second serial port on MSM devices.
+                 ARCH                DEBUG_UART_PHYS   DEBUG_UART_BASE   #
+                 MSM7X00A, QSD8X50   0xa9a00000        0xe1000000        UART1
+                 MSM7X00A, QSD8X50   0xa9b00000        0xe1000000        UART2
+                 MSM7X00A, QSD8X50   0xa9c00000        0xe1000000        UART3
 
-       config DEBUG_MSM_UART3
-               bool "Kernel low-level debugging messages via MSM UART3"
-               depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
-               select DEBUG_MSM_UART
-               help
-                 Say Y here if you want the debug print routines to direct
-                 their output to the third serial port on MSM devices.
+                 MSM7X30             0xaca00000        0xe1000000        UART1
+                 MSM7X30             0xacb00000        0xe1000000        UART2
+                 MSM7X30             0xacc00000        0xe1000000        UART3
 
-       config DEBUG_MSM8660_UART
-               bool "Kernel low-level debugging messages via MSM 8660 UART"
-               depends on ARCH_MSM8X60
-               select MSM_HAS_DEBUG_UART_HS
-               select DEBUG_MSM_UART
-               help
-                 Say Y here if you want the debug print routines to direct
-                 their output to the serial port on MSM 8660 devices.
+                 Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+                 options based on your needs.
 
-       config DEBUG_MSM8960_UART
-               bool "Kernel low-level debugging messages via MSM 8960 UART"
-               depends on ARCH_MSM8960
-               select MSM_HAS_DEBUG_UART_HS
-               select DEBUG_MSM_UART
+       config DEBUG_QCOM_UARTDM
+               bool "Kernel low-level debugging messages via QCOM UARTDM"
+               depends on ARCH_QCOM
                help
                  Say Y here if you want the debug print routines to direct
-                 their output to the serial port on MSM 8960 devices.
+                 their output to the serial port on Qualcomm devices.
 
-       config DEBUG_MSM8974_UART
-               bool "Kernel low-level debugging messages via MSM 8974 UART"
-               depends on ARCH_MSM8974
-               select MSM_HAS_DEBUG_UART_HS
-               select DEBUG_MSM_UART
-               help
-                 Say Y here if you want the debug print routines to direct
-                 their output to the serial port on MSM 8974 devices.
+                 ARCH      DEBUG_UART_PHYS   DEBUG_UART_BASE
+                 MSM8X60   0x19c40000        0xf0040000
+                 MSM8960   0x16440000        0xf0040000
+                 MSM8974   0xf991e000        0xfa71e000
+
+                 Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+                 options based on your needs.
 
        config DEBUG_MVEBU_UART
                bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
@@ -950,10 +933,6 @@ config DEBUG_STI_UART
        bool
        depends on ARCH_STI
 
-config DEBUG_MSM_UART
-       bool
-       depends on ARCH_MSM || ARCH_QCOM
-
 config DEBUG_LL_INCLUDE
        string
        default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
@@ -971,7 +950,7 @@ config DEBUG_LL_INCLUDE
                                 DEBUG_IMX53_UART ||\
                                 DEBUG_IMX6Q_UART || \
                                 DEBUG_IMX6SL_UART
-       default "debug/msm.S" if DEBUG_MSM_UART
+       default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
        default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
        default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
        default "debug/sti.S" if DEBUG_STI_UART
@@ -1035,6 +1014,7 @@ config DEBUG_UART_PHYS
        default 0x80074000 if DEBUG_IMX28_UART
        default 0x808c0000 if ARCH_EP93XX
        default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+       default 0xa9a00000 if DEBUG_MSM_UART
        default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
        default 0xc0013000 if DEBUG_U300_UART
        default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1050,6 +1030,7 @@ config DEBUG_UART_PHYS
                                ARCH_ORION5X
        default 0xf7fc9000 if DEBUG_BERLIN_UART
        default 0xf8b00000 if DEBUG_HI3716_UART
+       default 0xf991e000 if DEBUG_QCOM_UARTDM
        default 0xfcb00000 if DEBUG_HI3620_UART
        default 0xfe800000 if ARCH_IOP32X
        default 0xffc02000 if DEBUG_SOCFPGA_UART
@@ -1058,11 +1039,13 @@ config DEBUG_UART_PHYS
        default 0xfffff700 if ARCH_IOP33X
        depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
                DEBUG_LL_UART_EFM32 || \
-               DEBUG_UART_8250 || DEBUG_UART_PL01X
+               DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+               DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
 
 config DEBUG_UART_VIRT
        hex "Virtual base address of debug UART"
        default 0xe0010fe0 if ARCH_RPC
+       default 0xe1000000 if DEBUG_MSM_UART
        default 0xf0000be0 if ARCH_EBSA110
        default 0xf0009000 if DEBUG_CNS3XXX
        default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1078,6 +1061,7 @@ config DEBUG_UART_VIRT
        default 0xf7fc9000 if DEBUG_BERLIN_UART
        default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
        default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+       default 0xfa71e000 if DEBUG_QCOM_UARTDM
        default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
        default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
        default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1116,7 +1100,8 @@ config DEBUG_UART_VIRT
        default 0xff003000 if DEBUG_U300_UART
        default DEBUG_UART_PHYS if !MMU
        depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-               DEBUG_UART_8250 || DEBUG_UART_PL01X
+               DEBUG_UART_8250 || DEBUG_UART_PL01X || \
+               DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
 
 config DEBUG_UART_8250_SHIFT
        int "Register offset shift for the 8250 debug UART"

diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index 9d653d475903b56ea14e3e7c568319c963d9ceca..9ef57612811dff72bf14b7f73fbe1a0782bb0ae8 100644 (file)
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -15,51 +15,15 @@
  *
  */
 
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50)
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART3_PHYS        0xA9C00000
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define MSM_UART1_PHYS        0xACA00000
-#define MSM_UART2_PHYS        0xACB00000
-#define MSM_UART3_PHYS        0xACC00000
-#endif
-
-#if defined(CONFIG_DEBUG_MSM_UART1)
-#define MSM_DEBUG_UART_BASE    0xE1000000
-#define MSM_DEBUG_UART_PHYS    MSM_UART1_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART2)
-#define MSM_DEBUG_UART_BASE    0xE1000000
-#define MSM_DEBUG_UART_PHYS    MSM_UART2_PHYS
-#elif defined(CONFIG_DEBUG_MSM_UART3)
-#define MSM_DEBUG_UART_BASE    0xE1000000
-#define MSM_DEBUG_UART_PHYS    MSM_UART3_PHYS
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8660_UART
-#define MSM_DEBUG_UART_BASE    0xF0040000
-#define MSM_DEBUG_UART_PHYS    0x19C40000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8960_UART
-#define MSM_DEBUG_UART_BASE    0xF0040000
-#define MSM_DEBUG_UART_PHYS    0x16440000
-#endif
-
-#ifdef CONFIG_DEBUG_MSM8974_UART
-#define MSM_DEBUG_UART_BASE    0xFA71E000
-#define MSM_DEBUG_UART_PHYS    0xF991E000
-#endif
-
        .macro  addruart, rp, rv, tmp
-#ifdef MSM_DEBUG_UART_PHYS
-       ldr     \rp, =MSM_DEBUG_UART_PHYS
-       ldr     \rv, =MSM_DEBUG_UART_BASE
+#ifdef CONFIG_DEBUG_UART_PHYS
+       ldr     \rp, =CONFIG_DEBUG_UART_PHYS
+       ldr     \rv, =CONFIG_DEBUG_UART_VIRT
 #endif
        .endm
 
        .macro  senduart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
        @ Write the 1 character to UARTDM_TF
        str     \rd, [\rx, #0x70]
 #else
@@ -68,7 +32,7 @@
        .endm
 
        .macro  waituart, rd, rx
-#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
+#ifdef CONFIG_DEBUG_QCOM_UARTDM
        @ check for TX_EMT in UARTDM_SR
        ldr     \rd, [\rx, #0x08]
        tst     \rd, #0x08

diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index a7f959e58c3d0c3432ae6bbf603db0ed7ef7320e..9b26976fb0842ef90ab83fcf4ebbc6edbcb069f1 100644 (file)
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -42,9 +42,6 @@ config ARCH_QSD8X50
 
 endchoice
 
-config MSM_HAS_DEBUG_UART_HS
-       bool
-
 config MSM_SOC_REV_A
        bool