--- /dev/null
+ =================================
+ INTERNAL KERNEL ABI FOR FR-V ARCH
+ =================================
+
+The internal FRV kernel ABI is not quite the same as the userspace ABI. A number of the registers
+are used for special purposed, and the ABI is not consistent between modules vs core, and MMU vs
+no-MMU.
+
+This partly stems from the fact that FRV CPUs do not have a separate supervisor stack pointer, and
+most of them do not have any scratch registers, thus requiring at least one general purpose
+register to be clobbered in such an event. Also, within the kernel core, it is possible to simply
+jump or call directly between functions using a relative offset. This cannot be extended to modules
+for the displacement is likely to be too far. Thus in modules the address of a function to call
+must be calculated in a register and then used, requiring two extra instructions.
+
+This document has the following sections:
+
+ (*) System call register ABI
+ (*) CPU operating modes
+ (*) Internal kernel-mode register ABI
+ (*) Internal debug-mode register ABI
+ (*) Virtual interrupt handling
+
+
+========================
+SYSTEM CALL REGISTER ABI
+========================
+
+When a system call is made, the following registers are effective:
+
+ REGISTERS CALL RETURN
+ =============== ======================= =======================
+ GR7 System call number Preserved
+ GR8 Syscall arg #1 Return value
+ GR9-GR13 Syscall arg #2-6 Preserved
+
+
+===================
+CPU OPERATING MODES
+===================
+
+The FR-V CPU has three basic operating modes. In order of increasing capability:
+
+ (1) User mode.
+
+ Basic userspace running mode.
+
+ (2) Kernel mode.
+
+ Normal kernel mode. There are many additional control registers available that may be
+ accessed in this mode, in addition to all the stuff available to user mode. This has two
+ submodes:
+
+ (a) Exceptions enabled (PSR.T == 1).
+
+ Exceptions will invoke the appropriate normal kernel mode handler. On entry to the
+ handler, the PSR.T bit will be cleared.
+
+ (b) Exceptions disabled (PSR.T == 0).
+
+ No exceptions or interrupts may happen. Any mandatory exceptions will cause the CPU to
+ halt unless the CPU is told to jump into debug mode instead.
+
+ (3) Debug mode.
+
+ No exceptions may happen in this mode. Memory protection and management exceptions will be
+ flagged for later consideration, but the exception handler won't be invoked. Debugging traps
+ such as hardware breakpoints and watchpoints will be ignored. This mode is entered only by
+ debugging events obtained from the other two modes.
+
+ All kernel mode registers may be accessed, plus a few extra debugging specific registers.
+
+
+=================================
+INTERNAL KERNEL-MODE REGISTER ABI
+=================================
+
+There are a number of permanent register assignments that are set up by entry.S in the exception
+prologue. Note that there is a complete set of exception prologues for each of user->kernel
+transition and kernel->kernel transition. There are also user->debug and kernel->debug mode
+transition prologues.
+
+
+ REGISTER FLAVOUR USE
+ =============== ======= ====================================================
+ GR1 Supervisor stack pointer
+ GR15 Current thread info pointer
+ GR16 GP-Rel base register for small data
+ GR28 Current exception frame pointer (__frame)
+ GR29 Current task pointer (current)
+ GR30 Destroyed by kernel mode entry
+ GR31 NOMMU Destroyed by debug mode entry
+ GR31 MMU Destroyed by TLB miss kernel mode entry
+ CCR.ICC2 Virtual interrupt disablement tracking
+ CCCR.CC3 Cleared by exception prologue (atomic op emulation)
+ SCR0 MMU See mmu-layout.txt.
+ SCR1 MMU See mmu-layout.txt.
+ SCR2 MMU Save for EAR0 (destroyed by icache insns in debug mode)
+ SCR3 MMU Save for GR31 during debug exceptions
+ DAMR/IAMR NOMMU Fixed memory protection layout.
+ DAMR/IAMR MMU See mmu-layout.txt.
+
+
+Certain registers are also used or modified across function calls:
+
+ REGISTER CALL RETURN
+ =============== =============================== ===============================
+ GR0 Fixed Zero -
+ GR2 Function call frame pointer
+ GR3 Special Preserved
+ GR3-GR7 - Clobbered
+ GR8 Function call arg #1 Return value (or clobbered)
+ GR9 Function call arg #2 Return value MSW (or clobbered)
+ GR10-GR13 Function call arg #3-#6 Clobbered
+ GR14 - Clobbered
+ GR15-GR16 Special Preserved
+ GR17-GR27 - Preserved
+ GR28-GR31 Special Only accessed explicitly
+ LR Return address after CALL Clobbered
+ CCR/CCCR - Mostly Clobbered
+
+
+================================
+INTERNAL DEBUG-MODE REGISTER ABI
+================================
+
+This is the same as the kernel-mode register ABI for functions calls. The difference is that in
+debug-mode there's a different stack and a different exception frame. Almost all the global
+registers from kernel-mode (including the stack pointer) may be changed.
+
+ REGISTER FLAVOUR USE
+ =============== ======= ====================================================
+ GR1 Debug stack pointer
+ GR16 GP-Rel base register for small data
+ GR31 Current debug exception frame pointer (__debug_frame)
+ SCR3 MMU Saved value of GR31
+
+
+Note that debug mode is able to interfere with the kernel's emulated atomic ops, so it must be
+exceedingly careful not to do any that would interact with the main kernel in this regard. Hence
+the debug mode code (gdbstub) is almost completely self-contained. The only external code used is
+the sprintf family of functions.
+
+Futhermore, break.S is so complicated because single-step mode does not switch off on entry to an
+exception. That means unless manually disabled, single-stepping will blithely go on stepping into
+things like interrupts. See gdbstub.txt for more information.
+
+
+==========================
+VIRTUAL INTERRUPT HANDLING
+==========================
+
+Because accesses to the PSR is so slow, and to disable interrupts we have to access it twice (once
+to read and once to write), we don't actually disable interrupts at all if we don't have to. What
+we do instead is use the ICC2 condition code flags to note virtual disablement, such that if we
+then do take an interrupt, we note the flag, really disable interrupts, set another flag and resume
+execution at the point the interrupt happened. Setting condition flags as a side effect of an
+arithmetic or logical instruction is really fast. This use of the ICC2 only occurs within the
+kernel - it does not affect userspace.
+
+The flags we use are:
+
+ (*) CCR.ICC2.Z [Zero flag]
+
+ Set to virtually disable interrupts, clear when interrupts are virtually enabled. Can be
+ modified by logical instructions without affecting the Carry flag.
+
+ (*) CCR.ICC2.C [Carry flag]
+
+ Clear to indicate hardware interrupts are really disabled, set otherwise.
+
+
+What happens is this:
+
+ (1) Normal kernel-mode operation.
+
+ ICC2.Z is 0, ICC2.C is 1.
+
+ (2) An interrupt occurs. The exception prologue examines ICC2.Z and determines that nothing needs
+ doing. This is done simply with an unlikely BEQ instruction.
+
+ (3) The interrupts are disabled (local_irq_disable)
+
+ ICC2.Z is set to 1.
+
+ (4) If interrupts were then re-enabled (local_irq_enable):
+
+ ICC2.Z would be set to 0.
+
+ A TIHI #2 instruction (trap #2 if condition HI - Z==0 && C==0) would be used to trap if
+ interrupts were now virtually enabled, but physically disabled - which they're not, so the
+ trap isn't taken. The kernel would then be back to state (1).
+
+ (5) An interrupt occurs. The exception prologue examines ICC2.Z and determines that the interrupt
+ shouldn't actually have happened. It jumps aside, and there disabled interrupts by setting
+ PSR.PIL to 14 and then it clears ICC2.C.
+
+ (6) If interrupts were then saved and disabled again (local_irq_save):
+
+ ICC2.Z would be shifted into the save variable and masked off (giving a 1).
+
+ ICC2.Z would then be set to 1 (thus unchanged), and ICC2.C would be unaffected (ie: 0).
+
+ (7) If interrupts were then restored from state (6) (local_irq_restore):
+
+ ICC2.Z would be set to indicate the result of XOR'ing the saved value (ie: 1) with 1, which
+ gives a result of 0 - thus leaving ICC2.Z set.
+
+ ICC2.C would remain unaffected (ie: 0).
+
+ A TIHI #2 instruction would be used to again assay the current state, but this would do
+ nothing as Z==1.
+
+ (8) If interrupts were then enabled (local_irq_enable):
+
+ ICC2.Z would be cleared. ICC2.C would be left unaffected. Both flags would now be 0.
+
+ A TIHI #2 instruction again issued to assay the current state would then trap as both Z==0
+ [interrupts virtually enabled] and C==0 [interrupts really disabled] would then be true.
+
+ (9) The trap #2 handler would simply enable hardware interrupts (set PSR.PIL to 0), set ICC2.C to
+ 1 and return.
+
+(10) Immediately upon returning, the pending interrupt would be taken.
+
+(11) The interrupt handler would take the path of actually processing the interrupt (ICC2.Z is
+ clear, BEQ fails as per step (2)).
+
+(12) The interrupt handler would then set ICC2.C to 1 since hardware interrupts are definitely
+ enabled - or else the kernel wouldn't be here.
+
+(13) On return from the interrupt handler, things would be back to state (1).
+
+This trap (#2) is only available in kernel mode. In user mode it will result in SIGILL.
(default is 1)
Use 'init=0' to bypass initializing the chip.
Try this if your computer crashes when you load the module.
+* reset: int
+ (default is 0)
+ The driver used to reset the chip on load, but does no more. Use
+ 'reset=1' to restore the old behavior. Report if you need to do this.
Description
-----------
Mechanism 1.
conf2 [IA-32] Force use of PCI Configuration
Mechanism 2.
+ nommconf [IA-32,X86_64] Disable use of MMCONFIG for PCI
+ Configuration
nosort [IA-32] Don't sort PCI devices according to
order given by the PCI BIOS. This sorting is
done to get a device order compatible with
architectures:
- i386
-- x86_64 (AMD-64, E64MT)
+- x86_64 (AMD-64, EM64T)
- ppc64
-- ia64 (Support for probes on certain instruction types is still in progress.)
+- ia64 (Does not support probes on instruction slot1.)
- sparc64 (Return probes not yet implemented.)
3. Configuring Kprobes
When configuring the kernel using make menuconfig/xconfig/oldconfig,
-ensure that CONFIG_KPROBES is set to "y". Under "Kernel hacking",
-look for "Kprobes". You may have to enable "Kernel debugging"
-(CONFIG_DEBUG_KERNEL) before you can enable Kprobes.
+ensure that CONFIG_KPROBES is set to "y". Under "Instrumentation
+Support", look for "Kprobes".
+
+So that you can load and unload Kprobes-based instrumentation modules,
+make sure "Loadable module support" (CONFIG_MODULES) and "Module
+unloading" (CONFIG_MODULE_UNLOAD) are set to "y".
You may also want to ensure that CONFIG_KALLSYMS and perhaps even
CONFIG_KALLSYMS_ALL are set to "y", since kallsyms_lookup_name()
5. Kprobes Features and Limitations
-As of Linux v2.6.12, Kprobes allows multiple probes at the same
-address. Currently, however, there cannot be multiple jprobes on
-the same function at the same time.
+Kprobes allows multiple probes at the same address. Currently,
+however, there cannot be multiple jprobes on the same function at
+the same time.
In general, you can install a probe anywhere in the kernel.
In particular, you can probe interrupt handlers. Known exceptions
are discussed in this section.
-For obvious reasons, it's a bad idea to install a probe in
-the code that implements Kprobes (mostly kernel/kprobes.c and
-arch/*/kernel/kprobes.c). A patch in the v2.6.13 timeframe instructs
-Kprobes to reject such requests.
+The register_*probe functions will return -EINVAL if you attempt
+to install a probe in the code that implements Kprobes (mostly
+kernel/kprobes.c and arch/*/kernel/kprobes.c, but also functions such
+as do_page_fault and notifier_call_chain).
If you install a probe in an inline-able function, Kprobes makes
no attempt to chase down all inline instances of the function and
Kprobes makes no attempt to prevent probe handlers from stepping on
each other -- e.g., probing printk() and then calling printk() from a
-probe handler. As of Linux v2.6.12, if a probe handler hits a probe,
-that second probe's handlers won't be run in that instance.
-
-In Linux v2.6.12 and previous versions, Kprobes' data structures are
-protected by a single lock that is held during probe registration and
-unregistration and while handlers are run. Thus, no two handlers
-can run simultaneously. To improve scalability on SMP systems,
-this restriction will probably be removed soon, in which case
-multiple handlers (or multiple instances of the same handler) may
-run concurrently on different CPUs. Code your handlers accordingly.
-
-Kprobes does not use semaphores or allocate memory except during
+probe handler. If a probe handler hits a probe, that second probe's
+handlers won't be run in that instance, and the kprobe.nmissed member
+of the second probe will be incremented.
+
+As of Linux v2.6.15-rc1, multiple handlers (or multiple instances of
+the same handler) may run concurrently on different CPUs.
+
+Kprobes does not use mutexes or allocate memory except during
registration and unregistration.
Probe handlers are run with preemption disabled. Depending on the
(As far as we can tell, __builtin_return_address() is used only
for instrumentation and error reporting.)
-If the number of times a function is called does not match the
-number of times it returns, registering a return probe on that
-function may produce undesirable results. We have the do_exit()
-and do_execve() cases covered. do_fork() is not an issue. We're
-unaware of other specific cases where this could be a problem.
+If the number of times a function is called does not match the number
+of times it returns, registering a return probe on that function may
+produce undesirable results. We have the do_exit() case covered.
+do_execve() and do_fork() are not an issue. We're unaware of other
+specific cases where this could be a problem.
+
+If, upon entry to or exit from a function, the CPU is running on
+a stack other than that of the current task, registering a return
+probe on that function may produce undesirable results. For this
+reason, Kprobes doesn't support return probes (or kprobes or jprobes)
+on the x86_64 version of __switch_to(); the registration functions
+return -EINVAL.
6. Probe Overhead
7. TODO
-a. SystemTap (http://sourceware.org/systemtap): Work in progress
-to provide a simplified programming interface for probe-based
-instrumentation.
-b. Improved SMP scalability: Currently, work is in progress to handle
-multiple kprobes in parallel.
-c. Kernel return probes for sparc64.
-d. Support for other architectures.
-e. User-space probes.
+a. SystemTap (http://sourceware.org/systemtap): Provides a simplified
+programming interface for probe-based instrumentation. Try it out.
+b. Kernel return probes for sparc64.
+c. Support for other architectures.
+d. User-space probes.
+e. Watchpoint probes (which fire on data references).
8. Kprobes Example
printk("Couldn't find %s to plant kprobe\n", "do_fork");
return -1;
}
- ret = register_kprobe(&kp);
- if (ret < 0) {
+ if ((ret = register_kprobe(&kp) < 0)) {
printk("register_kprobe failed, returned %d\n", ret);
return -1;
}
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDE_AU1XXX=y
CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
+Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
+the burst support on DBDMA controller.
+
If the used system need the USB support enable the following kernel configs for
high IDE to USB throughput.
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
+Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
+disable the burst support on DBDMA controller.
ADD NEW HARD DISC TO WHITE OR BLACK LIST
----------------------------------------
compiler and the textural representation of
the tree that can be "compiled" by dtc.
-
November 21, 2005: Rev 0.5
- Additions/generalizations for 32-bit
- Changed to reflect the new arch/powerpc
};
+ f) Freescale SOC USB controllers
+
+ The device node for a USB controller that is part of a Freescale
+ SOC is as described in the document "Open Firmware Recommended
+ Practice : Universal Serial Bus" with the following modifications
+ and additions :
+
+ Required properties :
+ - compatible : Should be "fsl-usb2-mph" for multi port host usb
+ controllers, or "fsl-usb2-dr" for dual role usb controllers
+ - phy_type : For multi port host usb controllers, should be one of
+ "ulpi", or "serial". For dual role usb controllers, should be
+ one of "ulpi", "utmi", "utmi_wide", or "serial".
+ - reg : Offset and length of the register set for the device
+ - port0 : boolean; if defined, indicates port0 is connected for
+ fsl-usb2-mph compatible controllers. Either this property or
+ "port1" (or both) must be defined for "fsl-usb2-mph" compatible
+ controllers.
+ - port1 : boolean; if defined, indicates port1 is connected for
+ fsl-usb2-mph compatible controllers. Either this property or
+ "port0" (or both) must be defined for "fsl-usb2-mph" compatible
+ controllers.
+
+ Recommended properties :
+ - interrupts : <a b> where a is the interrupt number and b is a
+ field that represents an encoding of the sense and level
+ information for the interrupt. This should be encoded based on
+ the information in section 2) depending on the type of interrupt
+ controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+ Example multi port host usb controller device node :
+ usb@22000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-mph";
+ reg = <22000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <27 1>;
+ phy_type = "ulpi";
+ port0;
+ port1;
+ };
+
+ Example dual role usb controller device node :
+ usb@23000 {
+ device_type = "usb";
+ compatible = "fsl-usb2-dr";
+ reg = <23000 1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <700>;
+ interrupts = <26 1>;
+ phy = "ulpi";
+ };
+
+
More devices will be defined as this spec matures.
+1 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.04
+3 Older Version : 00.00.02.04
+
+i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
+ During initialization, depending on the device id, the template members
+ are initialized with function pointers specific to the ppc or
+ xscale controllers.
+
+ -Sumant Patro <Sumant.Patro@lsil.com>
+
+1 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro
+ <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.02.04
+3 Older Version : 00.00.02.02
+i. Register 16 byte CDB capability with scsi midlayer
+
+ "Ths patch properly registers the 16 byte command length capability of the
+ megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
+ hardware supports 16 byte CDB's."
+
+ -Joshua Giles <joshua_giles@dell.com>
+
1 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com>
2 Current Version : 00.00.02.02
3 Older Version : 00.00.02.01
M: schwidefsky@de.ibm.com
M: linux390@de.ibm.com
L: linux-390@vm.marist.edu
-W: http://oss.software.ibm.com/developerworks/opensource/linux390
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+
+S390 NETWORK DRIVERS
+P: Frank Pavlic
+M: fpavlic@de.ibm.com
+M: linux390@de.ibm.com
+L: linux-390@vm.marist.edu
+W: http://www.ibm.com/developerworks/linux/linux390/
+S: Supported
+
+S390 ZFCP DRIVER
+P: Andreas Herrmann
+M: aherrman@de.ibm.com
+M: linux390@de.ibm.com
+L: linux-390@vm.marist.edu
+W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
SAA7146 VIDEO4LINUX-2 DRIVER
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
-EXTRAVERSION =-rc2
+EXTRAVERSION =-rc3
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
-.PHONY: $(MAKECMDGOALS) cdbuilddir
-$(MAKECMDGOALS) _all: cdbuilddir
+.PHONY: $(MAKECMDGOALS)
-cdbuilddir:
+$(filter-out _all,$(MAKECMDGOALS)) _all:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
- KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $(MAKECMDGOALS)
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
#include <asm/irq.h>
#include <asm/mach-types.h>
-//#include <asm/debug-ll.h>
+
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-lcd.h>
+#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
#include <linux/serial_core.h>
#include "cpu.h"
static struct map_desc h1940_iodesc[] __initdata = {
- /* nothing here yet */
+ [0] = {
+ .virtual = (unsigned long)H1940_LATCH,
+ .pfn = __phys_to_pfn(H1940_PA_LATCH),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ },
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
}
};
+/* Board control latch control */
+
+static unsigned int latch_state = H1940_LATCH_DEFAULT;
+
+void h1940_latch_control(unsigned int clear, unsigned int set)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ latch_state &= ~clear;
+ latch_state |= set;
+
+ __raw_writel(latch_state, H1940_LATCH);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL_GPL(h1940_latch_control);
/**
--- /dev/null
+/* arch/arm/mach-s3c2410/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 09-Fev-2006 LCVR First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif
bool
default n
+config TIME_LOW_RES
+ bool
+ default y
+
mainmenu "Fujitsu FR-V Kernel Configuration"
source "init/Kconfig"
# - reserve CC3 for use with atomic ops
# - all the extra registers are dealt with only at context switch time
CFLAGS += -mno-fdpic -mgpr-32 -msoft-float -mno-media
-CFLAGS += -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15
+CFLAGS += -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2
AFLAGS += -mno-fdpic
ASFLAGS += -mno-fdpic
movsg bpcsr,gr2
sethi.p %hi(__entry_kernel_external_interrupt),gr3
setlo %lo(__entry_kernel_external_interrupt),gr3
- subcc gr2,gr3,gr0,icc0
+ subcc.p gr2,gr3,gr0,icc0
+ sethi %hi(__entry_uspace_external_interrupt),gr3
+ setlo.p %lo(__entry_uspace_external_interrupt),gr3
beq icc0,#2,__break_step_kernel_external_interrupt
- sethi.p %hi(__entry_uspace_external_interrupt),gr3
- setlo %lo(__entry_uspace_external_interrupt),gr3
- subcc gr2,gr3,gr0,icc0
+ subcc.p gr2,gr3,gr0,icc0
+ sethi %hi(__entry_kernel_external_interrupt_virtually_disabled),gr3
+ setlo.p %lo(__entry_kernel_external_interrupt_virtually_disabled),gr3
beq icc0,#2,__break_step_uspace_external_interrupt
+ subcc.p gr2,gr3,gr0,icc0
+ sethi %hi(__entry_kernel_external_interrupt_virtual_reenable),gr3
+ setlo.p %lo(__entry_kernel_external_interrupt_virtual_reenable),gr3
+ beq icc0,#2,__break_step_kernel_external_interrupt_virtually_disabled
+ subcc gr2,gr3,gr0,icc0
+ beq icc0,#2,__break_step_kernel_external_interrupt_virtual_reenable
LEDS 0x2007,gr2
# step through an external interrupt from kernel mode
.globl __break_step_kernel_external_interrupt
__break_step_kernel_external_interrupt:
+ # deal with virtual interrupt disablement
+ beq icc2,#0,__break_step_kernel_external_interrupt_virtually_disabled
+
sethi.p %hi(__entry_kernel_external_interrupt_reentry),gr3
setlo %lo(__entry_kernel_external_interrupt_reentry),gr3
#endif
rett #1
+# we single-stepped into an interrupt handler whilst interrupts were merely virtually disabled
+# need to really disable interrupts, set flag, fix up and return
+__break_step_kernel_external_interrupt_virtually_disabled:
+ movsg psr,gr2
+ andi gr2,#~PSR_PIL,gr2
+ ori gr2,#PSR_PIL_14,gr2 /* debugging interrupts only */
+ movgs gr2,psr
+
+ ldi @(gr31,#REG_CCR),gr3
+ movgs gr3,ccr
+ subcc.p gr0,gr0,gr0,icc2 /* leave Z set, clear C */
+
+ # exceptions must've been enabled and we must've been in supervisor mode
+ setlos BPSR_BET|BPSR_BS,gr3
+ movgs gr3,bpsr
+
+ # return to where the interrupt happened
+ movsg pcsr,gr2
+ movgs gr2,bpcsr
+
+ lddi.p @(gr31,#REG_GR(2)),gr2
+
+ xor gr31,gr31,gr31
+ movgs gr0,brr
+#ifdef CONFIG_MMU
+ movsg scr3,gr31
+#endif
+ rett #1
+
+# we stepped through into the virtual interrupt reenablement trap
+#
+# we also want to single step anyway, but after fixing up so that we get an event on the
+# instruction after the broken-into exception returns
+ .globl __break_step_kernel_external_interrupt_virtual_reenable
+__break_step_kernel_external_interrupt_virtual_reenable:
+ movsg psr,gr2
+ andi gr2,#~PSR_PIL,gr2
+ movgs gr2,psr
+
+ ldi @(gr31,#REG_CCR),gr3
+ movgs gr3,ccr
+ subicc gr0,#1,gr0,icc2 /* clear Z, set C */
+
+ # save the adjusted ICC2
+ movsg ccr,gr3
+ sti gr3,@(gr31,#REG_CCR)
+
+ # exceptions must've been enabled and we must've been in supervisor mode
+ setlos BPSR_BET|BPSR_BS,gr3
+ movgs gr3,bpsr
+
+ # return to where the trap happened
+ movsg pcsr,gr2
+ movgs gr2,bpcsr
+
+ # and then process the single step
+ bra __break_continue
+
# step through an internal exception from uspace mode
.globl __break_step_uspace_softprog_interrupt
__break_step_uspace_softprog_interrupt:
.long __break_step_uspace_external_interrupt
.section .trap.kernel
.org \tbr_tt
+ # deal with virtual interrupt disablement
+ beq icc2,#0,__entry_kernel_external_interrupt_virtually_disabled
bra __entry_kernel_external_interrupt
.section .trap.fixup.kernel
.org \tbr_tt >> 2
.org TBR_TT_TRAP0
.rept 127
bra __entry_uspace_softprog_interrupt
- bra __break_step_uspace_softprog_interrupt
- .long 0,0
+ .long 0,0,0
.endr
.org TBR_TT_BREAK
bra __entry_break
.long 0,0,0
+ .section .trap.fixup.user
+ .org TBR_TT_TRAP0 >> 2
+ .rept 127
+ .long __break_step_uspace_softprog_interrupt
+ .endr
+ .org TBR_TT_BREAK >> 2
+ .long 0
+
# miscellaneous kernel mode entry points
.section .trap.kernel
.org TBR_TT_TRAP0
- .rept 127
bra __entry_kernel_softprog_interrupt
- bra __break_step_kernel_softprog_interrupt
- .long 0,0
+ .org TBR_TT_TRAP1
+ bra __entry_kernel_softprog_interrupt
+
+ # trap #2 in kernel - reenable interrupts
+ .org TBR_TT_TRAP2
+ bra __entry_kernel_external_interrupt_virtual_reenable
+
+ # miscellaneous kernel traps
+ .org TBR_TT_TRAP3
+ .rept 124
+ bra __entry_kernel_softprog_interrupt
+ .long 0,0,0
.endr
.org TBR_TT_BREAK
bra __entry_break
.long 0,0,0
+ .section .trap.fixup.kernel
+ .org TBR_TT_TRAP0 >> 2
+ .long __break_step_kernel_softprog_interrupt
+ .long __break_step_kernel_softprog_interrupt
+ .long __break_step_kernel_external_interrupt_virtual_reenable
+ .rept 124
+ .long __break_step_kernel_softprog_interrupt
+ .endr
+ .org TBR_TT_BREAK >> 2
+ .long 0
+
# miscellaneous debug mode entry points
.section .trap.break
.org TBR_TT_BREAK
movsg gner0,gr4
movsg gner1,gr5
- stdi gr4,@(gr28,#REG_GNER0)
+ stdi.p gr4,@(gr28,#REG_GNER0)
+
+ # interrupts start off fully disabled in the interrupt handler
+ subcc gr0,gr0,gr0,icc2 /* set Z and clear C */
# set up kernel global registers
sethi.p %hi(__kernel_current_task),gr5
.type __entry_kernel_external_interrupt,@function
__entry_kernel_external_interrupt:
LEDS 0x6210
-
- sub sp,gr15,gr31
- LEDS32
+// sub sp,gr15,gr31
+// LEDS32
# set up the stack pointer
or.p sp,gr0,gr30
stdi gr24,@(gr28,#REG_GR(24))
stdi gr26,@(gr28,#REG_GR(26))
sti gr29,@(gr28,#REG_GR(29))
- stdi gr30,@(gr28,#REG_GR(30))
+ stdi.p gr30,@(gr28,#REG_GR(30))
+
+ # note virtual interrupts will be fully enabled upon return
+ subicc gr0,#1,gr0,icc2 /* clear Z, set C */
movsg tbr ,gr20
movsg psr ,gr22
movsg gner0,gr4
movsg gner1,gr5
- stdi gr4,@(gr28,#REG_GNER0)
+ stdi.p gr4,@(gr28,#REG_GNER0)
+
+ # interrupts start off fully disabled in the interrupt handler
+ subcc gr0,gr0,gr0,icc2 /* set Z and clear C */
# set the return address
sethi.p %hi(__entry_return_from_kernel_interrupt),gr4
.size __entry_kernel_external_interrupt,.-__entry_kernel_external_interrupt
+###############################################################################
+#
+# deal with interrupts that were actually virtually disabled
+# - we need to really disable them, flag the fact and return immediately
+# - if you change this, you must alter break.S also
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ .globl __entry_kernel_external_interrupt_virtually_disabled
+ .type __entry_kernel_external_interrupt_virtually_disabled,@function
+__entry_kernel_external_interrupt_virtually_disabled:
+ movsg psr,gr30
+ andi gr30,#~PSR_PIL,gr30
+ ori gr30,#PSR_PIL_14,gr30 ; debugging interrupts only
+ movgs gr30,psr
+ subcc gr0,gr0,gr0,icc2 ; leave Z set, clear C
+ rett #0
+
+ .size __entry_kernel_external_interrupt_virtually_disabled,.-__entry_kernel_external_interrupt_virtually_disabled
+
+###############################################################################
+#
+# deal with re-enablement of interrupts that were pending when virtually re-enabled
+# - set ICC2.C, re-enable the real interrupts and return
+# - we can clear ICC2.Z because we shouldn't be here if it's not 0 [due to TIHI]
+# - if you change this, you must alter break.S also
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ .globl __entry_kernel_external_interrupt_virtual_reenable
+ .type __entry_kernel_external_interrupt_virtual_reenable,@function
+__entry_kernel_external_interrupt_virtual_reenable:
+ movsg psr,gr30
+ andi gr30,#~PSR_PIL,gr30 ; re-enable interrupts
+ movgs gr30,psr
+ subicc gr0,#1,gr0,icc2 ; clear Z, set C
+ rett #0
+
+ .size __entry_kernel_external_interrupt_virtual_reenable,.-__entry_kernel_external_interrupt_virtual_reenable
###############################################################################
#
sethi.p %hi(__entry_return_from_user_exception),gr23
setlo %lo(__entry_return_from_user_exception),gr23
+
bra __entry_common
.size __entry_uspace_softprog_interrupt,.-__entry_uspace_softprog_interrupt
movsg gner0,gr4
movsg gner1,gr5
- stdi gr4,@(gr28,#REG_GNER0)
+ stdi.p gr4,@(gr28,#REG_GNER0)
+
+ # set up virtual interrupt disablement
+ subicc gr0,#1,gr0,icc2 /* clear Z flag, set C flag */
# set up kernel global registers
sethi.p %hi(__kernel_current_task),gr5
.long sys_add_key
.long sys_request_key
.long sys_keyctl
- .long sys_ni_syscall // sys_vperfctr_open
- .long sys_ni_syscall // sys_vperfctr_control /* 290 */
- .long sys_ni_syscall // sys_vperfctr_unlink
- .long sys_ni_syscall // sys_vperfctr_iresume
- .long sys_ni_syscall // sys_vperfctr_read
+ .long sys_ioprio_set
+ .long sys_ioprio_get /* 290 */
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages
+ .long sys_openat /* 295 */
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_futimesat
+ .long sys_newfstatat /* 300 */
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat /* 305 */
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_pselect6
+ .long sys_ppoll
syscall_table_size = (. - sys_call_table)
movgs gr0,ccr
movgs gr0,cccr
+ # initialise the virtual interrupt handling
+ subcc gr0,gr0,gr0,icc2 /* set Z, clear C */
+
#ifdef CONFIG_MMU
movgs gr3,scr2
movgs gr3,scr3
struct irq_source *source;
int level, cpu;
+ irq_enter();
+
level = (__frame->tbr >> 4) & 0xf;
cpu = smp_processor_id();
-#if 0
- {
- static u32 irqcount;
- *(volatile u32 *) 0xe1200004 = ~((irqcount++ << 8) | level);
- *(volatile u16 *) 0xffc00100 = (u16) ~0x9999;
- mb();
- }
-#endif
-
if ((unsigned long) __frame - (unsigned long) (current + 1) < 512)
BUG();
kstat_this_cpu.irqs[level]++;
- irq_enter();
-
for (source = frv_irq_levels[level].sources; source; source = source->next)
source->doirq(source);
- irq_exit();
-
__clr_MASK(level);
- /* only process softirqs if we didn't interrupt another interrupt handler */
- if ((__frame->psr & PSR_PIL) == PSR_PIL_0)
- if (local_softirq_pending())
- do_softirq();
-
-#ifdef CONFIG_PREEMPT
- local_irq_disable();
- while (--current->preempt_count == 0) {
- if (!(__frame->psr & PSR_S) ||
- current->need_resched == 0 ||
- in_interrupt())
- break;
- current->preempt_count++;
- local_irq_enable();
- preempt_schedule();
- local_irq_disable();
- }
-#endif
-
-#if 0
- {
- *(volatile u16 *) 0xffc00100 = (u16) ~0x6666;
- mb();
- }
-#endif
+ irq_exit();
} /* end do_IRQ() */
{
}
-/*
- * __iounmap unmaps nearly everything, so be careful
- * it doesn't free currently pointer/page tables anymore but it
- * wans't used anyway and might be added later.
- */
-void __iounmap(void *addr, unsigned long size)
-{
-}
-
/*
* Set new cache mode for some kernel address space.
* The caller must push data for that range itself, if such data may already
bool
default y
+config TIME_LOW_RES
+ bool
+ default y
+
config ISA
bool
default y
config CPU_H8300H
bool
- depends on (H8002 || H83007 || H83048 || H83068)
+ depends on (H83002 || H83007 || H83048 || H83068)
default y
config CPU_H8S
--- /dev/null
+bootsect
+bzImage
+setup
--- /dev/null
+vsyscall.lds
pushl 32(%esp)
pushl 40(%esp)
pushl $int_msg
+#ifdef CONFIG_EARLY_PRINTK
+ call early_printk
+#else
call printk
+#endif
addl $(5*4),%esp
popl %ds
popl %es
cpumask_t cpu_callin_map;
cpumask_t cpu_callout_map;
EXPORT_SYMBOL(cpu_callout_map);
-#ifdef CONFIG_HOTPLUG_CPU
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
-#else
cpumask_t cpu_possible_map;
-#endif
EXPORT_SYMBOL(cpu_possible_map);
static cpumask_t smp_commenced_mask;
.long sys_mknodat
.long sys_fchownat
.long sys_futimesat
- .long sys_newfstatat /* 300 */
+ .long sys_fstatat64 /* 300 */
.long sys_unlinkat
.long sys_renameat
.long sys_linkat
if (val != CPUFREQ_RESUMECHANGE)
write_seqlock_irq(&xtime_lock);
if (!ref_freq) {
+ if (!freq->old){
+ ref_freq = freq->new;
+ goto end;
+ }
ref_freq = freq->old;
loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
#ifndef CONFIG_SMP
#endif
}
+end:
if (val != CPUFREQ_RESUMECHANGE)
write_sequnlock_irq(&xtime_lock);
* for details.
*/
+/*
+ * The caller puts arg2 in %ecx, which gets pushed. The kernel will use
+ * %ecx itself for arg2. The pushing is because the sysexit instruction
+ * (found in entry.S) requires that we clobber %ecx with the desired %esp.
+ * User code might expect that %ecx is unclobbered though, as it would be
+ * for returning via the iret instruction, so we must push and pop.
+ *
+ * The caller puts arg3 in %edx, which the sysexit instruction requires
+ * for %eip. Thus, exactly as for arg2, we must push and pop.
+ *
+ * Arg6 is different. The caller puts arg6 in %ebp. Since the sysenter
+ * instruction clobbers %esp, the user's %esp won't even survive entry
+ * into the kernel. We store %esp in %ebp. Code in entry.S must fetch
+ * arg6 from the stack.
+ */
.text
.globl __kernel_vsyscall
.type __kernel_vsyscall,@function
cpumask_t cpu_callin_map = CPU_MASK_NONE;
cpumask_t cpu_callout_map = CPU_MASK_NONE;
EXPORT_SYMBOL(cpu_callout_map);
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
+cpumask_t cpu_possible_map = CPU_MASK_NONE;
EXPORT_SYMBOL(cpu_possible_map);
/* The per processor IRQ masks (these are usually kept in sync) */
} __attribute__((packed));
static struct frame_head *
-dump_backtrace(struct frame_head * head)
+dump_kernel_backtrace(struct frame_head * head)
+{
+ oprofile_add_trace(head->ret);
+
+ /* frame pointers should strictly progress back up the stack
+ * (towards higher addresses) */
+ if (head >= head->ebp)
+ return NULL;
+
+ return head->ebp;
+}
+
+static struct frame_head *
+dump_user_backtrace(struct frame_head * head)
{
struct frame_head bufhead[2];
if (!user_mode_vm(regs)) {
while (depth-- && valid_kernel_stack(head, regs))
- head = dump_backtrace(head);
+ head = dump_kernel_backtrace(head);
return;
}
while (depth-- && head)
- head = dump_backtrace(head);
+ head = dump_user_backtrace(head);
}
sigact_set_handler(&new_sa, handler, 0);
new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
+ sigemptyset(&new_sa.sa.sa_mask);
ret = do_sigaction(sig, &new_sa, &old_sa);
data8 sys_inotify_add_watch
data8 sys_inotify_rm_watch
data8 sys_migrate_pages // 1280
+ data8 sys_openat
+ data8 sys_mkdirat
+ data8 sys_mknodat
+ data8 sys_fchownat
+ data8 sys_futimesat // 1285
+ data8 sys_newfstatat
+ data8 sys_unlinkat
+ data8 sys_renameat
+ data8 sys_linkat
+ data8 sys_symlinkat // 1290
+ data8 sys_readlinkat
+ data8 sys_fchmodat
+ data8 sys_faccessat
+ data8 sys_ni_syscall // reserved for pselect
+ data8 sys_ni_syscall // 1295 reserved for ppoll
+ data8 sys_unshare
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
data8 0 // timer_delete
data8 0 // clock_settime
data8 fsys_clock_gettime // clock_gettime
- data8 0 // clock_getres // 1255
- data8 0 // clock_nanosleep
- data8 0 // fstatfs64
- data8 0 // statfs64
- data8 0
- data8 0 // 1260
- data8 0
- data8 0 // mq_open
- data8 0 // mq_unlink
- data8 0 // mq_timedsend
- data8 0 // mq_timedreceive // 1265
- data8 0 // mq_notify
- data8 0 // mq_getsetattr
- data8 0 // kexec_load
- data8 0
- data8 0 // 1270
- data8 0
- data8 0
- data8 0
- data8 0
- data8 0 // 1275
- data8 0
- data8 0
- data8 0
- data8 0
- data8 0 // 1280
+ #define __NR_syscall_last 1255
+
+ .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
.org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
* the process not have any locks of kernel.
*/
+ /* Is minstate valid? */
+ if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate))
+ return 0;
psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr);
/*
void sn_bus_free_sysdata(void)
{
struct sysdata_el *element;
- struct list_head *list;
+ struct list_head *list, *safe;
-sn_sysdata_free_start:
- list_for_each(list, &sn_sysdata_list) {
+ list_for_each_safe(list, safe, &sn_sysdata_list) {
element = list_entry(list, struct sysdata_el, entry);
list_del(&element->entry);
+ list_del(&(((struct pcidev_info *)
+ (element->sysdata))->pdi_list));
kfree(element->sysdata);
kfree(element);
- goto sn_sysdata_free_start;
}
return;
}
return;
sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info;
- if (!sn_irq_info || !sn_irq_info->irq_irq) {
+ if (!sn_irq_info)
+ return;
+ if (!sn_irq_info->irq_irq) {
kfree(sn_irq_info);
return;
}
bool
default y
+config TIME_LOW_RES
+ bool
+ default y
+
config ARCH_MAY_HAVE_PC_FDC
bool
depends on Q40 || (BROKEN && SUN3X)
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|BINDEC idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|BINSTR idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|BUGFIX idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|DECBIN idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
DO_FUNC: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
| fpsp.h --- stack frame offsets during FPSP exception handling
|
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
GEN_EXCEPT: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
GET_OP: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
KERNEL_EX: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
RES_FUNC: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|ROUND idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SACOS idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SASIN idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|satan idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|satanh idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SCALE idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SCOSH idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|setox idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SGETEM idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SINT idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|
| Modified for Linux-1.3.x by Jes Sorensen (jds@kom.auc.dk)
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SLOG2 idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|slogn idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SMOVECR idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
SREM_MOD: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SSIN idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|SSINH idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|STAN idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|STANH idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
STO_RES: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|STWOTOX idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|TBLDO idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
|UTIL idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_BSUN: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_FLINE: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_OPERR: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_OVFL: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_SNAN: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_STORE: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_UNFL: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_UNIMP: |idnt 2,1 | Motorola 040 Floating Point Software Package
| Copyright (C) Motorola, Inc. 1990
| All Rights Reserved
|
-| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
-| The copyright notice above does not evidence any
-| actual or intended publication of such source code.
+| For details on the license for this file, please see the
+| file, README, in this same directory.
X_UNSUPP: |idnt 2,1 | Motorola 040 Floating Point Software Package
bool
default y
+config TIME_LOW_RES
+ bool
+ default y
+
source "init/Kconfig"
menu "Processor type and features"
# machines may also. Since BFD is incredibly buggy with respect to
# crossformat linking we rely on the elf2ecoff tool for format conversion.
#
-cflags-y += -I $(TOPDIR)/include/asm/gcc
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
MODFLAGS += -mlong-calls
#include <linux/a.out.h>
#include <linux/init.h>
#include <linux/completion.h>
+#include <linux/kallsyms.h>
#include <asm/abi.h>
#include <asm/bootinfo.h>
static struct mips_frame_info {
void *func;
- int omit_fp; /* compiled without fno-omit-frame-pointer */
- int frame_offset;
+ unsigned long func_size;
+ int frame_size;
int pc_offset;
-} schedule_frame, mfinfo[] = {
- { schedule, 0 }, /* must be first */
- /* arch/mips/kernel/semaphore.c */
- { __down, 1 },
- { __down_interruptible, 1 },
- /* kernel/sched.c */
-#ifdef CONFIG_PREEMPT
- { preempt_schedule, 0 },
-#endif
- { wait_for_completion, 0 },
- { interruptible_sleep_on, 0 },
- { interruptible_sleep_on_timeout, 0 },
- { sleep_on, 0 },
- { sleep_on_timeout, 0 },
- { yield, 0 },
- { io_schedule, 0 },
- { io_schedule_timeout, 0 },
-#if defined(CONFIG_SMP) && defined(CONFIG_PREEMPT)
- { __preempt_spin_lock, 0 },
- { __preempt_write_lock, 0 },
-#endif
- /* kernel/timer.c */
- { schedule_timeout, 1 },
-/* { nanosleep_restart, 1 }, */
- /* lib/rwsem-spinlock.c */
- { __down_read, 1 },
- { __down_write, 1 },
-};
+} *schedule_frame, mfinfo[64];
+static int mfinfo_num;
-static int mips_frame_info_initialized;
static int __init get_frame_info(struct mips_frame_info *info)
{
int i;
void *func = info->func;
union mips_instruction *ip = (union mips_instruction *)func;
info->pc_offset = -1;
- info->frame_offset = info->omit_fp ? 0 : -1;
+ info->frame_size = 0;
for (i = 0; i < 128; i++, ip++) {
/* if jal, jalr, jr, stop. */
if (ip->j_format.opcode == jal_op ||
ip->r_format.func == jr_op)))
break;
+ if (info->func_size && i >= info->func_size / 4)
+ break;
+ if (
+#ifdef CONFIG_32BIT
+ ip->i_format.opcode == addiu_op &&
+#endif
+#ifdef CONFIG_64BIT
+ ip->i_format.opcode == daddiu_op &&
+#endif
+ ip->i_format.rs == 29 &&
+ ip->i_format.rt == 29) {
+ /* addiu/daddiu sp,sp,-imm */
+ if (info->frame_size)
+ continue;
+ info->frame_size = - ip->i_format.simmediate;
+ }
+
if (
#ifdef CONFIG_32BIT
ip->i_format.opcode == sw_op &&
#ifdef CONFIG_64BIT
ip->i_format.opcode == sd_op &&
#endif
- ip->i_format.rs == 29)
- {
+ ip->i_format.rs == 29 &&
+ ip->i_format.rt == 31) {
/* sw / sd $ra, offset($sp) */
- if (ip->i_format.rt == 31) {
- if (info->pc_offset != -1)
- continue;
- info->pc_offset =
- ip->i_format.simmediate / sizeof(long);
- }
- /* sw / sd $s8, offset($sp) */
- if (ip->i_format.rt == 30) {
-//#if 0 /* gcc 3.4 does aggressive optimization... */
- if (info->frame_offset != -1)
- continue;
-//#endif
- info->frame_offset =
- ip->i_format.simmediate / sizeof(long);
- }
+ if (info->pc_offset != -1)
+ continue;
+ info->pc_offset =
+ ip->i_format.simmediate / sizeof(long);
}
}
- if (info->pc_offset == -1 || info->frame_offset == -1) {
- printk("Can't analyze prologue code at %p\n", func);
+ if (info->pc_offset == -1 || info->frame_size == 0) {
+ if (func == schedule)
+ printk("Can't analyze prologue code at %p\n", func);
info->pc_offset = -1;
- info->frame_offset = -1;
- return -1;
+ info->frame_size = 0;
}
return 0;
static int __init frame_info_init(void)
{
- int i, found;
- for (i = 0; i < ARRAY_SIZE(mfinfo); i++)
- if (get_frame_info(&mfinfo[i]))
- return -1;
- schedule_frame = mfinfo[0];
- /* bubble sort */
- do {
- struct mips_frame_info tmp;
- found = 0;
- for (i = 1; i < ARRAY_SIZE(mfinfo); i++) {
- if (mfinfo[i-1].func > mfinfo[i].func) {
- tmp = mfinfo[i];
- mfinfo[i] = mfinfo[i-1];
- mfinfo[i-1] = tmp;
- found = 1;
- }
- }
- } while (found);
- mips_frame_info_initialized = 1;
+ int i;
+#ifdef CONFIG_KALLSYMS
+ char *modname;
+ char namebuf[KSYM_NAME_LEN + 1];
+ unsigned long start, size, ofs;
+ extern char __sched_text_start[], __sched_text_end[];
+ extern char __lock_text_start[], __lock_text_end[];
+
+ start = (unsigned long)__sched_text_start;
+ for (i = 0; i < ARRAY_SIZE(mfinfo); i++) {
+ if (start == (unsigned long)schedule)
+ schedule_frame = &mfinfo[i];
+ if (!kallsyms_lookup(start, &size, &ofs, &modname, namebuf))
+ break;
+ mfinfo[i].func = (void *)(start + ofs);
+ mfinfo[i].func_size = size;
+ start += size - ofs;
+ if (start >= (unsigned long)__lock_text_end)
+ break;
+ if (start == (unsigned long)__sched_text_end)
+ start = (unsigned long)__lock_text_start;
+ }
+#else
+ mfinfo[0].func = schedule;
+ schedule_frame = &mfinfo[0];
+#endif
+ for (i = 0; i < ARRAY_SIZE(mfinfo) && mfinfo[i].func; i++)
+ get_frame_info(&mfinfo[i]);
+
+ mfinfo_num = i;
return 0;
}
if (t->reg31 == (unsigned long) ret_from_fork)
return t->reg31;
- if (schedule_frame.pc_offset < 0)
+ if (!schedule_frame || schedule_frame->pc_offset < 0)
return 0;
- return ((unsigned long *)t->reg29)[schedule_frame.pc_offset];
+ return ((unsigned long *)t->reg29)[schedule_frame->pc_offset];
}
/* get_wchan - a maintenance nightmare^W^Wpain in the ass ... */
unsigned long get_wchan(struct task_struct *p)
{
unsigned long stack_page;
- unsigned long frame, pc;
+ unsigned long pc;
+#ifdef CONFIG_KALLSYMS
+ unsigned long frame;
+#endif
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)task_stack_page(p);
- if (!stack_page || !mips_frame_info_initialized)
+ if (!stack_page || !mfinfo_num)
return 0;
pc = thread_saved_pc(p);
+#ifdef CONFIG_KALLSYMS
if (!in_sched_functions(pc))
return pc;
- frame = ((unsigned long *)p->thread.reg30)[schedule_frame.frame_offset];
+ frame = p->thread.reg29 + schedule_frame->frame_size;
do {
int i;
if (frame < stack_page || frame > stack_page + THREAD_SIZE - 32)
return 0;
- for (i = ARRAY_SIZE(mfinfo) - 1; i >= 0; i--) {
+ for (i = mfinfo_num - 1; i >= 0; i--) {
if (pc >= (unsigned long) mfinfo[i].func)
break;
}
if (i < 0)
break;
- if (mfinfo[i].omit_fp)
- break;
pc = ((unsigned long *)frame)[mfinfo[i].pc_offset];
- frame = ((unsigned long *)frame)[mfinfo[i].frame_offset];
+ if (!mfinfo[i].frame_size)
+ break;
+ frame += mfinfo[i].frame_size;
} while (in_sched_functions(pc));
+#endif
return pc;
}
sys sys_mknodat 4 /* 4290 */
sys sys_fchownat 5
sys sys_futimesat 3
- sys sys_newfstatat 4
+ sys sys_fstatat64 4
sys sys_unlinkat 3
sys sys_renameat 4 /* 4295 */
sys sys_linkat 4
if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags (sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
- return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? 32 : ALMASK));
+ return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
}
static inline int install_sigtramp(unsigned int __user *tramp,
/* The ucontext contains a stack32_t, so we must convert! */
if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
goto badframe;
- st.ss_size = (long) sp;
+ st.ss_sp = (void *)(long) sp;
if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size))
goto badframe;
if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags))
/* The ucontext contains a stack32_t, so we must convert! */
if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
goto badframe;
- st.ss_size = (long) sp;
+ st.ss_sp = (void *)(long) sp;
if (__get_user(st.ss_size, &frame->rs_uc.uc_stack.ss_size))
goto badframe;
if (__get_user(st.ss_flags, &frame->rs_uc.uc_stack.ss_flags))
set_c0_mvpcontrol(MVPCONTROL_VPC);
+ back_to_back_c0_hazard();
+
/* Disable TLB sharing */
clear_c0_mvpcontrol(MVPCONTROL_STLB);
clear_c0_mvpcontrol(MVPCONTROL_VPC);
}
-#if 0
-/*
- * Use c0_MVPConf0 to find out how many CPUs are available, setting up
- * phys_cpu_present_map and the logical/physical mappings.
- */
-void __init prom_build_cpu_map(void)
-{
- int i, num, ncpus;
-
- cpus_clear(phys_cpu_present_map);
-
- /* assume we boot on cpu 0.... */
- cpu_set(0, phys_cpu_present_map);
- __cpu_number_map[0] = 0;
- __cpu_logical_map[0] = 0;
-
- if (cpu_has_mipsmt) {
- ncpus = ((read_c0_mvpconf0() & (MVPCONF0_PVPE)) >> MVPCONF0_PVPE_SHIFT) + 1;
- for (i=1, num=0; i< NR_CPUS && i<ncpus; i++) {
- cpu_set(i, phys_cpu_present_map);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
-
- printk(KERN_INFO "%i available secondary CPU(s)\n", num);
- }
-}
-#endif
-
static void ipi_resched_dispatch (struct pt_regs *regs)
{
do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
/* set config to be the same as vpe0, particularly kseg0 coherency alg */
write_vpe_c0_config( read_c0_config());
+
+ /* Propagate Config7 */
+ write_vpe_c0_config7(read_c0_config7());
}
}
static inline void local_r4k_flush_icache_range(void *args)
{
struct flush_icache_range_args *fir_args = args;
- unsigned long dc_lsize = cpu_dcache_line_size();
- unsigned long ic_lsize = cpu_icache_line_size();
- unsigned long sc_lsize = cpu_scache_line_size();
unsigned long start = fir_args->start;
unsigned long end = fir_args->end;
- unsigned long addr, aend;
if (!cpu_has_ic_fills_f_dc) {
if (end - start > dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
- addr = start & ~(dc_lsize - 1);
- aend = (end - 1) & ~(dc_lsize - 1);
-
- while (1) {
- /* Hit_Writeback_Inv_D */
- protected_writeback_dcache_line(addr);
- if (addr == aend)
- break;
- addr += dc_lsize;
- }
+ protected_blast_dcache_range(start, end);
}
if (!cpu_icache_snoops_remote_store) {
- if (end - start > scache_size) {
+ if (end - start > scache_size)
r4k_blast_scache();
- } else {
- addr = start & ~(sc_lsize - 1);
- aend = (end - 1) & ~(sc_lsize - 1);
-
- while (1) {
- /* Hit_Writeback_Inv_SD */
- protected_writeback_scache_line(addr);
- if (addr == aend)
- break;
- addr += sc_lsize;
- }
- }
+ else
+ protected_blast_scache_range(start, end);
}
}
if (end - start > icache_size)
r4k_blast_icache();
- else {
- addr = start & ~(ic_lsize - 1);
- aend = (end - 1) & ~(ic_lsize - 1);
- while (1) {
- /* Hit_Invalidate_I */
- protected_flush_icache_line(addr);
- if (addr == aend)
- break;
- addr += ic_lsize;
- }
- }
+ else
+ protected_blast_icache_range(start, end);
}
static void r4k_flush_icache_range(unsigned long start, unsigned long end)
static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
{
- unsigned long end, a;
-
/* Catch bad driver code */
BUG_ON(size == 0);
if (cpu_has_subset_pcaches) {
- unsigned long sc_lsize = cpu_scache_line_size();
-
- if (size >= scache_size) {
+ if (size >= scache_size)
r4k_blast_scache();
- return;
- }
-
- a = addr & ~(sc_lsize - 1);
- end = (addr + size - 1) & ~(sc_lsize - 1);
- while (1) {
- flush_scache_line(a); /* Hit_Writeback_Inv_SD */
- if (a == end)
- break;
- a += sc_lsize;
- }
+ else
+ blast_scache_range(addr, addr + size);
return;
}
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
R4600_HIT_CACHEOP_WAR_IMPL;
- a = addr & ~(dc_lsize - 1);
- end = (addr + size - 1) & ~(dc_lsize - 1);
- while (1) {
- flush_dcache_line(a); /* Hit_Writeback_Inv_D */
- if (a == end)
- break;
- a += dc_lsize;
- }
+ blast_dcache_range(addr, addr + size);
}
bc_wback_inv(addr, size);
static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
{
- unsigned long end, a;
-
/* Catch bad driver code */
BUG_ON(size == 0);
if (cpu_has_subset_pcaches) {
- unsigned long sc_lsize = cpu_scache_line_size();
-
- if (size >= scache_size) {
+ if (size >= scache_size)
r4k_blast_scache();
- return;
- }
-
- a = addr & ~(sc_lsize - 1);
- end = (addr + size - 1) & ~(sc_lsize - 1);
- while (1) {
- flush_scache_line(a); /* Hit_Writeback_Inv_SD */
- if (a == end)
- break;
- a += sc_lsize;
- }
+ else
+ blast_scache_range(addr, addr + size);
return;
}
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
R4600_HIT_CACHEOP_WAR_IMPL;
- a = addr & ~(dc_lsize - 1);
- end = (addr + size - 1) & ~(dc_lsize - 1);
- while (1) {
- flush_dcache_line(a); /* Hit_Writeback_Inv_D */
- if (a == end)
- break;
- a += dc_lsize;
- }
+ blast_dcache_range(addr, addr + size);
}
bc_inv(addr, size);
/* TX39H-style cache flush routines. */
static void tx39h_flush_icache_all(void)
{
- unsigned long start = KSEG0;
- unsigned long end = (start + icache_size);
unsigned long flags, config;
/* disable icache (set ICE#) */
config = read_c0_conf();
write_c0_conf(config & ~TX39_CONF_ICE);
TX39_STOP_STREAMING();
-
- /* invalidate icache */
- while (start < end) {
- cache16_unroll32(start, Index_Invalidate_I);
- start += 0x200;
- }
-
+ blast_icache16();
write_c0_conf(config);
local_irq_restore(flags);
}
static void tx39h_dma_cache_wback_inv(unsigned long addr, unsigned long size)
{
- unsigned long end, a;
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
-
/* Catch bad driver code */
BUG_ON(size == 0);
iob();
- a = addr & ~(dc_lsize - 1);
- end = (addr + size - 1) & ~(dc_lsize - 1);
- while (1) {
- invalidate_dcache_line(a); /* Hit_Invalidate_D */
- if (a == end) break;
- a += dc_lsize;
- }
+ blast_inv_dcache_range(addr, addr + size);
}
static void tx39_flush_icache_range(unsigned long start, unsigned long end)
{
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- unsigned long addr, aend;
-
if (end - start > dcache_size)
tx39_blast_dcache();
- else {
- addr = start & ~(dc_lsize - 1);
- aend = (end - 1) & ~(dc_lsize - 1);
-
- while (1) {
- /* Hit_Writeback_Inv_D */
- protected_writeback_dcache_line(addr);
- if (addr == aend)
- break;
- addr += dc_lsize;
- }
- }
+ else
+ protected_blast_dcache_range(start, end);
if (end - start > icache_size)
tx39_blast_icache();
else {
unsigned long flags, config;
- addr = start & ~(dc_lsize - 1);
- aend = (end - 1) & ~(dc_lsize - 1);
/* disable icache (set ICE#) */
local_irq_save(flags);
config = read_c0_conf();
write_c0_conf(config & ~TX39_CONF_ICE);
TX39_STOP_STREAMING();
- while (1) {
- /* Hit_Invalidate_I */
- protected_flush_icache_line(addr);
- if (addr == aend)
- break;
- addr += dc_lsize;
- }
+ protected_blast_icache_range(start, end);
write_c0_conf(config);
local_irq_restore(flags);
}
static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size)
{
- unsigned long end, a;
+ unsigned long end;
if (((size | addr) & (PAGE_SIZE - 1)) == 0) {
end = addr + size;
} else if (size > dcache_size) {
tx39_blast_dcache();
} else {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- a = addr & ~(dc_lsize - 1);
- end = (addr + size - 1) & ~(dc_lsize - 1);
- while (1) {
- flush_dcache_line(a); /* Hit_Writeback_Inv_D */
- if (a == end) break;
- a += dc_lsize;
- }
+ blast_dcache_range(addr, addr + size);
}
}
static void tx39_dma_cache_inv(unsigned long addr, unsigned long size)
{
- unsigned long end, a;
+ unsigned long end;
if (((size | addr) & (PAGE_SIZE - 1)) == 0) {
end = addr + size;
} else if (size > dcache_size) {
tx39_blast_dcache();
} else {
- unsigned long dc_lsize = current_cpu_data.dcache.linesz;
- a = addr & ~(dc_lsize - 1);
- end = (addr + size - 1) & ~(dc_lsize - 1);
- while (1) {
- invalidate_dcache_line(a); /* Hit_Invalidate_D */
- if (a == end) break;
- a += dc_lsize;
- }
+ blast_inv_dcache_range(addr, addr + size);
}
}
bool
default y
+config TIME_LOW_RES
+ bool
+ depends on SMP
+ default y
+
config GENERIC_ISA_DMA
bool
ENTRY_SAME(inotify_init)
ENTRY_SAME(inotify_add_watch) /* 270 */
ENTRY_SAME(inotify_rm_watch)
- ENTRY_COMP(pselect6)
- ENTRY_COMP(ppoll)
+ ENTRY_SAME(ni_syscall) /* 271 ENTRY_COMP(pselect6) */
+ ENTRY_SAME(ni_syscall) /* 272 ENTRY_COMP(ppoll) */
ENTRY_SAME(migrate_pages)
ENTRY_COMP(openat) /* 275 */
ENTRY_SAME(mkdirat)
ENTRY_SAME(mknodat)
ENTRY_SAME(fchownat)
ENTRY_COMP(futimesat)
- ENTRY_COMP(newfstatat) /* 280 */
+ ENTRY_SAME(fstatat64) /* 280 */
ENTRY_SAME(unlinkat)
ENTRY_SAME(renameat)
ENTRY_SAME(linkat)
default y if PPC32 && SMP
default n
+config DEFAULT_UIMAGE
+ bool
+ help
+ Used to allow a board to specify it wants a uImage built by default
+ default n
+
menu "Processor support"
choice
prompt "Processor Type"
# Default to zImage, override when needed
defaultimage-y := zImage
defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
+defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage
KBUILD_IMAGE := $(defaultimage-y)
all: $(KBUILD_IMAGE)
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
+
+archmrproper:
$(Q)rm -rf arch/$(ARCH)/include
archprepare: checkbin
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
- init_task.o process.o
+ init_task.o process.o systbl.o
obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
- signal_64.o ptrace32.o systbl.o \
+ signal_64.o ptrace32.o \
paca.o cpu_setup_power4.o \
firmware.o sysfs.o idle_64.o
obj-$(CONFIG_PPC64) += vdso64/
extra-y += vmlinux.lds
obj-y += time.o prom.o traps.o setup-common.o udbg.o
-obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o
+obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o
obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
#ifdef CONFIG_PPC64
#define sys_sigpending sys_ni_syscall
#define sys_old_getrlimit sys_ni_syscall
-#else
-#define ppc_rtas sys_ni_syscall
#endif
_GLOBAL(sys_call_table)
SYSCALL(spu_create)
COMPAT_SYS(pselect6)
COMPAT_SYS(ppoll)
+SYSCALL(unshare)
blr
SYSCALL(execve)
-
-/* Why isn't this a) automatic, b) written in 'C'? */
- .data
- .align 4
-_GLOBAL(sys_call_table)
- .long sys_restart_syscall /* 0 */
- .long sys_exit
- .long ppc_fork
- .long sys_read
- .long sys_write
- .long sys_open /* 5 */
- .long sys_close
- .long sys_waitpid
- .long sys_creat
- .long sys_link
- .long sys_unlink /* 10 */
- .long sys_execve
- .long sys_chdir
- .long sys_time
- .long sys_mknod
- .long sys_chmod /* 15 */
- .long sys_lchown
- .long sys_ni_syscall /* old break syscall holder */
- .long sys_stat
- .long sys_lseek
- .long sys_getpid /* 20 */
- .long sys_mount
- .long sys_oldumount
- .long sys_setuid
- .long sys_getuid
- .long sys_stime /* 25 */
- .long sys_ptrace
- .long sys_alarm
- .long sys_fstat
- .long sys_pause
- .long sys_utime /* 30 */
- .long sys_ni_syscall /* old stty syscall holder */
- .long sys_ni_syscall /* old gtty syscall holder */
- .long sys_access
- .long sys_nice
- .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */
- .long sys_sync
- .long sys_kill
- .long sys_rename
- .long sys_mkdir
- .long sys_rmdir /* 40 */
- .long sys_dup
- .long sys_pipe
- .long sys_times
- .long sys_ni_syscall /* old prof syscall holder */
- .long sys_brk /* 45 */
- .long sys_setgid
- .long sys_getgid
- .long sys_signal
- .long sys_geteuid
- .long sys_getegid /* 50 */
- .long sys_acct
- .long sys_umount /* recycled never used phys() */
- .long sys_ni_syscall /* old lock syscall holder */
- .long sys_ioctl
- .long sys_fcntl /* 55 */
- .long sys_ni_syscall /* old mpx syscall holder */
- .long sys_setpgid
- .long sys_ni_syscall /* old ulimit syscall holder */
- .long sys_olduname
- .long sys_umask /* 60 */
- .long sys_chroot
- .long sys_ustat
- .long sys_dup2
- .long sys_getppid
- .long sys_getpgrp /* 65 */
- .long sys_setsid
- .long sys_sigaction
- .long sys_sgetmask
- .long sys_ssetmask
- .long sys_setreuid /* 70 */
- .long sys_setregid
- .long sys_sigsuspend
- .long sys_sigpending
- .long sys_sethostname
- .long sys_setrlimit /* 75 */
- .long sys_old_getrlimit
- .long sys_getrusage
- .long sys_gettimeofday
- .long sys_settimeofday
- .long sys_getgroups /* 80 */
- .long sys_setgroups
- .long ppc_select
- .long sys_symlink
- .long sys_lstat
- .long sys_readlink /* 85 */
- .long sys_uselib
- .long sys_swapon
- .long sys_reboot
- .long old_readdir
- .long sys_mmap /* 90 */
- .long sys_munmap
- .long sys_truncate
- .long sys_ftruncate
- .long sys_fchmod
- .long sys_fchown /* 95 */
- .long sys_getpriority
- .long sys_setpriority
- .long sys_ni_syscall /* old profil syscall holder */
- .long sys_statfs
- .long sys_fstatfs /* 100 */
- .long sys_ni_syscall
- .long sys_socketcall
- .long sys_syslog
- .long sys_setitimer
- .long sys_getitimer /* 105 */
- .long sys_newstat
- .long sys_newlstat
- .long sys_newfstat
- .long sys_uname
- .long sys_ni_syscall /* 110 */
- .long sys_vhangup
- .long sys_ni_syscall /* old 'idle' syscall */
- .long sys_ni_syscall
- .long sys_wait4
- .long sys_swapoff /* 115 */
- .long sys_sysinfo
- .long sys_ipc
- .long sys_fsync
- .long sys_sigreturn
- .long ppc_clone /* 120 */
- .long sys_setdomainname
- .long sys_newuname
- .long sys_ni_syscall
- .long sys_adjtimex
- .long sys_mprotect /* 125 */
- .long sys_sigprocmask
- .long sys_ni_syscall /* old sys_create_module */
- .long sys_init_module
- .long sys_delete_module
- .long sys_ni_syscall /* old sys_get_kernel_syms */ /* 130 */
- .long sys_quotactl
- .long sys_getpgid
- .long sys_fchdir
- .long sys_bdflush
- .long sys_sysfs /* 135 */
- .long sys_personality
- .long sys_ni_syscall /* for afs_syscall */
- .long sys_setfsuid
- .long sys_setfsgid
- .long sys_llseek /* 140 */
- .long sys_getdents
- .long ppc_select
- .long sys_flock
- .long sys_msync
- .long sys_readv /* 145 */
- .long sys_writev
- .long sys_getsid
- .long sys_fdatasync
- .long sys_sysctl
- .long sys_mlock /* 150 */
- .long sys_munlock
- .long sys_mlockall
- .long sys_munlockall
- .long sys_sched_setparam
- .long sys_sched_getparam /* 155 */
- .long sys_sched_setscheduler
- .long sys_sched_getscheduler
- .long sys_sched_yield
- .long sys_sched_get_priority_max
- .long sys_sched_get_priority_min /* 160 */
- .long sys_sched_rr_get_interval
- .long sys_nanosleep
- .long sys_mremap
- .long sys_setresuid
- .long sys_getresuid /* 165 */
- .long sys_ni_syscall /* old sys_query_module */
- .long sys_poll
- .long sys_nfsservctl
- .long sys_setresgid
- .long sys_getresgid /* 170 */
- .long sys_prctl
- .long sys_rt_sigreturn
- .long sys_rt_sigaction
- .long sys_rt_sigprocmask
- .long sys_rt_sigpending /* 175 */
- .long sys_rt_sigtimedwait
- .long sys_rt_sigqueueinfo
- .long sys_rt_sigsuspend
- .long sys_pread64
- .long sys_pwrite64 /* 180 */
- .long sys_chown
- .long sys_getcwd
- .long sys_capget
- .long sys_capset
- .long sys_sigaltstack /* 185 */
- .long sys_sendfile
- .long sys_ni_syscall /* streams1 */
- .long sys_ni_syscall /* streams2 */
- .long ppc_vfork
- .long sys_getrlimit /* 190 */
- .long sys_readahead
- .long sys_mmap2
- .long sys_truncate64
- .long sys_ftruncate64
- .long sys_stat64 /* 195 */
- .long sys_lstat64
- .long sys_fstat64
- .long sys_pciconfig_read
- .long sys_pciconfig_write
- .long sys_pciconfig_iobase /* 200 */
- .long sys_ni_syscall /* 201 - reserved - MacOnLinux - new */
- .long sys_getdents64
- .long sys_pivot_root
- .long sys_fcntl64
- .long sys_madvise /* 205 */
- .long sys_mincore
- .long sys_gettid
- .long sys_tkill
- .long sys_setxattr
- .long sys_lsetxattr /* 210 */
- .long sys_fsetxattr
- .long sys_getxattr
- .long sys_lgetxattr
- .long sys_fgetxattr
- .long sys_listxattr /* 215 */
- .long sys_llistxattr
- .long sys_flistxattr
- .long sys_removexattr
- .long sys_lremovexattr
- .long sys_fremovexattr /* 220 */
- .long sys_futex
- .long sys_sched_setaffinity
- .long sys_sched_getaffinity
- .long sys_ni_syscall
- .long sys_ni_syscall /* 225 - reserved for Tux */
- .long sys_sendfile64
- .long sys_io_setup
- .long sys_io_destroy
- .long sys_io_getevents
- .long sys_io_submit /* 230 */
- .long sys_io_cancel
- .long sys_set_tid_address
- .long sys_fadvise64
- .long sys_exit_group
- .long sys_lookup_dcookie /* 235 */
- .long sys_epoll_create
- .long sys_epoll_ctl
- .long sys_epoll_wait
- .long sys_remap_file_pages
- .long sys_timer_create /* 240 */
- .long sys_timer_settime
- .long sys_timer_gettime
- .long sys_timer_getoverrun
- .long sys_timer_delete
- .long sys_clock_settime /* 245 */
- .long sys_clock_gettime
- .long sys_clock_getres
- .long sys_clock_nanosleep
- .long sys_swapcontext
- .long sys_tgkill /* 250 */
- .long sys_utimes
- .long sys_statfs64
- .long sys_fstatfs64
- .long ppc_fadvise64_64
- .long sys_ni_syscall /* 255 - rtas (used on ppc64) */
- .long sys_debug_setcontext
- .long sys_ni_syscall /* 257 reserved for vserver */
- .long sys_ni_syscall /* 258 reserved for new sys_remap_file_pages */
- .long sys_ni_syscall /* 259 reserved for new sys_mbind */
- .long sys_ni_syscall /* 260 reserved for new sys_get_mempolicy */
- .long sys_ni_syscall /* 261 reserved for new sys_set_mempolicy */
- .long sys_mq_open
- .long sys_mq_unlink
- .long sys_mq_timedsend
- .long sys_mq_timedreceive /* 265 */
- .long sys_mq_notify
- .long sys_mq_getsetattr
- .long sys_kexec_load
- .long sys_add_key
- .long sys_request_key /* 270 */
- .long sys_keyctl
- .long sys_waitid
- .long sys_ioprio_set
- .long sys_ioprio_get
- .long sys_inotify_init /* 275 */
- .long sys_inotify_add_watch
- .long sys_inotify_rm_watch
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Thu Jan 19 10:58:53 2006
+# Linux kernel version: 2.6.16-rc2
+# Wed Feb 8 10:44:39 2006
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_STATISTICS is not set
#
# Kernel hacking
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
return ret;
}
+asmlinkage long sys32_fstatat(unsigned int dfd, char __user *filename,
+ struct stat64_emu31 __user* statbuf, int flag)
+{
+ struct kstat stat;
+ int error = -EINVAL;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (flag & AT_SYMLINK_NOFOLLOW)
+ error = vfs_lstat_fd(dfd, filename, &stat);
+ else
+ error = vfs_stat_fd(dfd, filename, &stat);
+
+ if (!error)
+ error = cp_stat64(statbuf, &stat);
+out:
+ return error;
+}
+
/*
* Linux/i386 didn't use to be able to handle more than
* 4 system call parameters, so these system calls used a memory
return ret;
}
-int
-do_sigaction(int sig, const struct k_sigaction *act, struct k_sigaction *oact);
-
asmlinkage long
sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
struct sigaction32 __user *oact, size_t sigsetsize)
llgtr %r4,%r4 # struct timeval *
jg compat_sys_futimesat
- .globl compat_sys_newfstatat_wrapper
-compat_sys_newfstatat_wrapper:
+ .globl sys32_fstatat_wrapper
+sys32_fstatat_wrapper:
llgfr %r2,%r2 # unsigned int
llgtr %r3,%r3 # char *
- llgtr %r4,%r4 # struct stat *
+ llgtr %r4,%r4 # struct stat64 *
lgfr %r5,%r5 # int
- jg compat_sys_newfstatat
+ jg sys32_fstatat
.globl sys_unlinkat_wrapper
sys_unlinkat_wrapper:
llgtr %r5,%r5 # const sigset_t *
llgfr %r6,%r6 # size_t
jg compat_sys_ppoll
+
+ .globl sys_unshare_wrapper
+sys_unshare_wrapper:
+ llgfr %r2,%r2 # unsigned long
+ jg sys_unshare
* on the S390 architecture.
*/
-#include <asm/cio.h>
-#include <asm/setup.h>
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/kexec.h>
#include <linux/delay.h>
+#include <asm/cio.h>
+#include <asm/setup.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/system.h>
+#include <asm/smp.h>
static void kexec_halt_all_cpus(void *);
struct _lowcore *lowcore_ptr[NR_CPUS];
cpumask_t cpu_online_map;
-cpumask_t cpu_possible_map;
+cpumask_t cpu_possible_map = CPU_MASK_ALL;
static struct task_struct *current_set[NR_CPUS];
num_cpus++;
}
- for (cpu = 1; cpu < max_cpus; cpu++)
- cpu_set(cpu, cpu_possible_map);
-
printk("Detected %d CPU's\n",(int) num_cpus);
printk("Boot cpu address %2X\n", boot_cpu_addr);
}
cpu_set(0, cpu_online_map);
cpu_set(0, cpu_present_map);
- cpu_set(0, cpu_possible_map);
S390_lowcore.percpu_offset = __per_cpu_offset[0];
current_set[0] = current;
}
SYSCALL(sys_mknodat,sys_mknodat,sys_mknodat_wrapper) /* 290 */
SYSCALL(sys_fchownat,sys_fchownat,sys_fchownat_wrapper)
SYSCALL(sys_futimesat,sys_futimesat,compat_sys_futimesat_wrapper)
-SYSCALL(sys_newfstatat,sys_newfstatat,compat_sys_newfstatat_wrapper)
+SYSCALL(sys_fstatat64,sys_newfstatat,sys32_fstatat_wrapper)
SYSCALL(sys_unlinkat,sys_unlinkat,sys_unlinkat_wrapper)
SYSCALL(sys_renameat,sys_renameat,sys_renameat_wrapper) /* 295 */
SYSCALL(sys_linkat,sys_linkat,sys_linkat_wrapper)
SYSCALL(sys_faccessat,sys_faccessat,sys_faccessat_wrapper) /* 300 */
SYSCALL(sys_pselect6,sys_pselect6,compat_sys_pselect6_wrapper)
SYSCALL(sys_ppoll,sys_ppoll,compat_sys_ppoll_wrapper)
+SYSCALL(sys_unshare,sys_unshare,sys_unshare_wrapper)
*/
__asm__ __volatile__(
"0: brct %0,0b"
- : /* no outputs */ : "r" (loops/2) );
+ : /* no outputs */ : "r" ((loops/2) + 1));
}
/*
/*270*/ .long sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink
/*275*/ .long sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
/*280*/ .long sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
-/*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_newfstatat
+/*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
/*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
return error;
}
+asmlinkage long compat_sys_fstatat64(unsigned int dfd, char __user *filename,
+ struct compat_stat64 __user * statbuf, int flag)
+{
+ struct kstat stat;
+ int error = -EINVAL;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (flag & AT_SYMLINK_NOFOLLOW)
+ error = vfs_lstat_fd(dfd, filename, &stat);
+ else
+ error = vfs_stat_fd(dfd, filename, &stat);
+
+ if (!error)
+ error = cp_compat_stat64(&stat, statbuf);
+
+out:
+ return error;
+}
+
asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
{
return sys_sysfs(option, arg1, arg2);
/*270*/ .word sys32_io_submit, sys_io_cancel, compat_sys_io_getevents, sys32_mq_open, sys_mq_unlink
.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
/*280*/ .word sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
- .word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_newfstatat
+ .word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
/*270*/ .word sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink
.word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
/*280*/ .word sys_nis_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
- .word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, compat_sys_newfstatat
+ .word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
/*285*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
bool
default y
+config TIME_LOW_RES
+ bool
+ default y
+
# Turn off some random 386 crap that can affect device config
config ISA
bool
.quad sys_mknodat
.quad sys_fchownat
.quad compat_sys_futimesat
- .quad compat_sys_newfstatat /* 300 */
+ .quad sys32_fstatat /* 300 */
.quad sys_unlinkat
.quad sys_renameat
.quad sys_linkat
return ret;
}
+asmlinkage long
+sys32_fstatat(unsigned int dfd, char __user *filename,
+ struct stat64 __user* statbuf, int flag)
+{
+ struct kstat stat;
+ int error = -EINVAL;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (flag & AT_SYMLINK_NOFOLLOW)
+ error = vfs_lstat_fd(dfd, filename, &stat);
+ else
+ error = vfs_stat_fd(dfd, filename, &stat);
+
+ if (!error)
+ error = cp_stat64(statbuf, &stat);
+
+out:
+ return error;
+}
+
/*
* Linux/i386 didn't use to be able to handle more than
* 4 system call parameters, so these system calls used a memory
local_irq_save(flags);
/* wait for irq slice */
- if (vxtime.hpet_address) {
+ if (vxtime.hpet_address && hpet_use_timer) {
int trigger = hpet_readl(HPET_T0_CMP);
while (hpet_readl(HPET_COUNTER) >= trigger)
/* do nothing */ ;
for (i = 0; i < nents; i++) {
struct scatterlist *s = &sg[i];
- if (!s->dma_length || !s->length)
+ if (!s->dma_length)
break;
dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
}
BUG_ON(i > start && s->offset);
if (i == start) {
- *sout = *s;
sout->dma_address = iommu_bus_base;
sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
sout->dma_length = s->length;
SET_LEAK(iommu_page);
addr += PAGE_SIZE;
iommu_page++;
- }
+ }
}
BUG_ON(iommu_page - iommu_start != pages);
return 0;
{
if (!need) {
BUG_ON(stopat - start != 1);
- *sout = sg[start];
sout->dma_length = sg[start].length;
return 0;
}
unsigned int cpu_khz; /* TSC clocks / usec, not used here */
static unsigned long hpet_period; /* fsecs / HPET clock */
unsigned long hpet_tick; /* HPET clocks / interrupt */
-static int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */
+int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */
unsigned long vxtime_hz = PIT_TICK_RATE;
int report_lost_ticks; /* command line option */
unsigned long long monotonic_base;
print_symbol("rip %s\n", regs->rip);
if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) {
printk(KERN_WARNING "Falling back to HPET\n");
- vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ if (hpet_use_timer)
+ vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ else
+ vxtime.last = hpet_readl(HPET_COUNTER);
vxtime.mode = VXTIME_HPET;
do_gettimeoffset = do_gettimeoffset_hpet;
}
notsc = 1;
if (vxtime.hpet_address && notsc) {
timetype = hpet_use_timer ? "HPET" : "PIT/HPET";
- vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ if (hpet_use_timer)
+ vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ else
+ vxtime.last = hpet_readl(HPET_COUNTER);
vxtime.mode = VXTIME_HPET;
do_gettimeoffset = do_gettimeoffset_hpet;
#ifdef CONFIG_X86_PM_TIMER
local_irq_enable();
}
+static inline void preempt_conditional_sti(struct pt_regs *regs)
+{
+ preempt_disable();
+ if (regs->eflags & X86_EFLAGS_IF)
+ local_irq_enable();
+}
+
+static inline void preempt_conditional_cli(struct pt_regs *regs)
+{
+ if (regs->eflags & X86_EFLAGS_IF)
+ local_irq_disable();
+ preempt_enable_no_resched();
+}
+
static int kstack_depth_to_print = 10;
#ifdef CONFIG_KALLSYMS
SIGTRAP) == NOTIFY_STOP)
return;
- conditional_sti(regs);
+ preempt_conditional_sti(regs);
/* Mask out spurious debug traps due to lazy DR7 setting */
if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
clear_dr7:
set_debugreg(0UL, 7);
+ preempt_conditional_cli(regs);
return;
clear_TF_reenable:
set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
regs->eflags &= ~TF_MASK;
+ preempt_conditional_cli(regs);
}
static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
continue;
if (apicid_to_node[apicid] == NUMA_NO_NODE)
continue;
- cpu_to_node[i] = apicid_to_node[apicid];
+ numa_set_node(i,apicid_to_node[apicid]);
}
}
* b) The data can be used as cache to avoid read requests if we receive a
* new write request for the same zone.
*/
-static void pkt_make_local_copy(struct packet_data *pkt, struct page **pages, int *offsets)
+static void pkt_make_local_copy(struct packet_data *pkt, struct bio_vec *bvec)
{
int f, p, offs;
p = 0;
offs = 0;
for (f = 0; f < pkt->frames; f++) {
- if (pages[f] != pkt->pages[p]) {
- void *vfrom = kmap_atomic(pages[f], KM_USER0) + offsets[f];
+ if (bvec[f].bv_page != pkt->pages[p]) {
+ void *vfrom = kmap_atomic(bvec[f].bv_page, KM_USER0) + bvec[f].bv_offset;
void *vto = page_address(pkt->pages[p]) + offs;
memcpy(vto, vfrom, CD_FRAMESIZE);
kunmap_atomic(vfrom, KM_USER0);
- pages[f] = pkt->pages[p];
- offsets[f] = offs;
+ bvec[f].bv_page = pkt->pages[p];
+ bvec[f].bv_offset = offs;
} else {
- BUG_ON(offsets[f] != offs);
+ BUG_ON(bvec[f].bv_offset != offs);
}
offs += CD_FRAMESIZE;
if (offs >= PAGE_SIZE) {
static void pkt_start_write(struct pktcdvd_device *pd, struct packet_data *pkt)
{
struct bio *bio;
- struct page *pages[PACKET_MAX_SIZE];
- int offsets[PACKET_MAX_SIZE];
int f;
int frames_write;
+ struct bio_vec *bvec = pkt->w_bio->bi_io_vec;
for (f = 0; f < pkt->frames; f++) {
- pages[f] = pkt->pages[(f * CD_FRAMESIZE) / PAGE_SIZE];
- offsets[f] = (f * CD_FRAMESIZE) % PAGE_SIZE;
+ bvec[f].bv_page = pkt->pages[(f * CD_FRAMESIZE) / PAGE_SIZE];
+ bvec[f].bv_offset = (f * CD_FRAMESIZE) % PAGE_SIZE;
}
/*
- * Fill-in pages[] and offsets[] with data from orig_bios.
+ * Fill-in bvec with data from orig_bios.
*/
frames_write = 0;
spin_lock(&pkt->lock);
}
if (src_bvl->bv_len - src_offs >= CD_FRAMESIZE) {
- pages[f] = src_bvl->bv_page;
- offsets[f] = src_bvl->bv_offset + src_offs;
+ bvec[f].bv_page = src_bvl->bv_page;
+ bvec[f].bv_offset = src_bvl->bv_offset + src_offs;
} else {
pkt_copy_bio_data(bio, segment, src_offs,
- pages[f], offsets[f]);
+ bvec[f].bv_page, bvec[f].bv_offset);
}
src_offs += CD_FRAMESIZE;
frames_write++;
BUG_ON(frames_write != pkt->write_size);
if (test_bit(PACKET_MERGE_SEGS, &pd->flags) || (pkt->write_size < pkt->frames)) {
- pkt_make_local_copy(pkt, pages, offsets);
+ pkt_make_local_copy(pkt, bvec);
pkt->cache_valid = 1;
} else {
pkt->cache_valid = 0;
pkt->w_bio->bi_bdev = pd->bdev;
pkt->w_bio->bi_end_io = pkt_end_io_packet_write;
pkt->w_bio->bi_private = pkt;
- for (f = 0; f < pkt->frames; f++) {
- if ((f + 1 < pkt->frames) && (pages[f + 1] == pages[f]) &&
- (offsets[f + 1] = offsets[f] + CD_FRAMESIZE)) {
- if (!bio_add_page(pkt->w_bio, pages[f], CD_FRAMESIZE * 2, offsets[f]))
- BUG();
- f++;
- } else {
- if (!bio_add_page(pkt->w_bio, pages[f], CD_FRAMESIZE, offsets[f]))
- BUG();
- }
- }
+ for (f = 0; f < pkt->frames; f++)
+ if (!bio_add_page(pkt->w_bio, bvec[f].bv_page, CD_FRAMESIZE, bvec[f].bv_offset))
+ BUG();
VPRINTK("pktcdvd: vcnt=%d\n", pkt->w_bio->bi_vcnt);
atomic_set(&pkt->io_wait, 1);
case 0x12: /* DVD-RAM */
return 0;
default:
- printk("pktcdvd: Wrong disc profile (%x)\n", pd->mmc3_profile);
+ VPRINTK("pktcdvd: Wrong disc profile (%x)\n", pd->mmc3_profile);
return 1;
}
unsigned int write_speed, media_write_speed, read_speed;
if ((ret = pkt_probe_settings(pd))) {
- DPRINTK("pktcdvd: %s failed probe\n", pd->name);
- return -EIO;
+ VPRINTK("pktcdvd: %s failed probe\n", pd->name);
+ return -EROFS;
}
if ((ret = pkt_set_write_settings(pd))) {
goto out_dec;
}
} else {
- if (pkt_open_dev(pd, file->f_mode & FMODE_WRITE)) {
- ret = -EIO;
+ ret = pkt_open_dev(pd, file->f_mode & FMODE_WRITE);
+ if (ret)
goto out_dec;
- }
/*
* needed here as well, since ext2 (among others) may change
* the blocksize at mount time
* The door gets locked when the device is opened, so we
* have to unlock it or else the eject command fails.
*/
- pkt_lock_door(pd, 0);
+ if (pd->refcnt == 1)
+ pkt_lock_door(pd, 0);
return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
default:
- printk("pktcdvd: Unknown ioctl for %s (%x)\n", pd->name, cmd);
+ VPRINTK("pktcdvd: Unknown ioctl for %s (%x)\n", pd->name, cmd);
return -ENOTTY;
}
/* ======================== Card services HCI interaction ======================== */
-static struct device *bt3c_device(void)
-{
- static struct device dev = {
- .bus_id = "pcmcia",
- };
- kobject_set_name(&dev.kobj, "bt3c");
- kobject_init(&dev.kobj);
-
- return &dev;
-}
-
-
static int bt3c_load_firmware(bt3c_info_t *info, unsigned char *firmware, int count)
{
char *ptr = (char *) firmware;
{
const struct firmware *firmware;
struct hci_dev *hdev;
+ client_handle_t handle;
int err;
spin_lock_init(&(info->lock));
hdev->owner = THIS_MODULE;
+ handle = info->link.handle;
+
/* Load firmware */
- err = request_firmware(&firmware, "BT3CPCC.bin", bt3c_device());
+ err = request_firmware(&firmware, "BT3CPCC.bin", &handle_to_dev(handle));
if (err < 0) {
BT_ERR("Firmware request failed");
goto error;
{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
{0x1002, 0x596A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x596B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
- {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x5c61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|CHIP_IS_MOBILITY}, \
{0x1002, 0x5c62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5c63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|CHIP_IS_MOBILITY}, \
/* Standard COM flags (except for COM4, because of the 8514 problem) */
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the memcpy_fromfs blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *tmp_buf;
-
static inline int serial_paranoia_check(struct esp_struct *info,
char *name, const char *routine)
{
if (serial_paranoia_check(info, tty->name, "rs_write"))
return 0;
- if (!tty || !info->xmit_buf || !tmp_buf)
+ if (!tty || !info->xmit_buf)
return 0;
while (1) {
tty->driver_data = info;
info->tty = tty;
- if (!tmp_buf) {
- tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL);
- if (!tmp_buf)
- return -ENOMEM;
- }
+ spin_unlock_irqrestore(&info->lock, flags);
/*
* Start up serial port
free_pages((unsigned long)dma_buffer,
get_order(DMA_BUFFER_SZ));
- if (tmp_buf)
- free_page((unsigned long)tmp_buf);
-
while (free_pio_buf) {
pio_buf = free_pio_buf->next;
kfree(free_pio_buf);
}
} else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) {
struct acpi_resource_extended_irq *irqp;
- int i;
+ int i, irq;
irqp = &res->data.extended_irq;
- if (irqp->interrupt_count > 0) {
- hdp->hd_nirqs = irqp->interrupt_count;
-
- for (i = 0; i < hdp->hd_nirqs; i++) {
- int rc =
- acpi_register_gsi(irqp->interrupts[i],
- irqp->triggering,
- irqp->polarity);
- if (rc < 0)
- return AE_ERROR;
- hdp->hd_irq[i] = rc;
- }
+ for (i = 0; i < irqp->interrupt_count; i++) {
+ irq = acpi_register_gsi(irqp->interrupts[i],
+ irqp->triggering, irqp->polarity);
+ if (irq < 0)
+ return AE_ERROR;
+
+ hdp->hd_irq[hdp->hd_nirqs] = irq;
+ hdp->hd_nirqs++;
}
}
{
unsigned int minor = iminor(inode) - TIPAR_MINOR;
- if (minor > tp_count - 1)
+ if (tp_count == 0 || minor > tp_count - 1)
return -ENXIO;
if (test_and_set_bit(minor, &opened))
return -EBUSY;
+ if (!table[minor].dev) {
+ printk(KERN_ERR "%s: NULL device for minor %u\n",
+ __FUNCTION__, minor);
+ return -ENXIO;
+ }
parport_claim_or_block(table[minor].dev);
init_ti_parallel(minor);
parport_release(table[minor].dev);
err = PTR_ERR(tipar_class);
goto out_chrdev;
}
- if (parport_register_driver(&tipar_driver)) {
+ if (parport_register_driver(&tipar_driver) || tp_count == 0) {
printk(KERN_ERR "tipar: unable to register with parport\n");
err = -EIO;
- goto out;
+ goto out_class;
}
err = 0;
goto out;
+out_class:
+ class_destroy(tipar_class);
+
out_chrdev:
+ devfs_remove("ticables/par");
unregister_chrdev(TIPAR_MAJOR, "tipar");
out:
return err;
p->size = size;
p->next = NULL;
p->active = 0;
+ p->commit = 0;
+ p->read = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
/* printk("Flip create %p\n", p); */
*tbh = t->next;
t->next = NULL;
t->used = 0;
+ t->commit = 0;
+ t->read = 0;
/* DEBUG ONLY */
memset(t->data, '*', size);
/* printk("Flip recycle %p\n", t); */
if (b != NULL) {
b->next = n;
b->active = 0;
+ b->commit = b->used;
} else
tty->buf.head = n;
tty->buf.tail = n;
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
- up(&tty_sem);
do_sleep = 0;
if (tty_closing) {
printk(KERN_WARNING "release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
+ up(&tty_sem);
schedule();
}
* both sides, and we've completed the last operation that could
* block, so it's safe to proceed with closing.
*/
-
- down(&tty_sem);
if (pty_master) {
if (--o_tty->count < 0) {
printk(KERN_WARNING "release_dev: bad pty slave count "
tty->count, tty_name(tty, buf));
tty->count = 0;
}
- up(&tty_sem);
/*
* We've decremented tty->count, so we need to remove this file
read_unlock(&tasklist_lock);
}
+ up(&tty_sem);
+
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing))
return;
unsigned long flags;
struct tty_ldisc *disc;
struct tty_buffer *tbuf;
+ int count;
+ char *char_buf;
+ unsigned char *flag_buf;
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
goto out;
}
spin_lock_irqsave(&tty->buf.lock, flags);
- while((tbuf = tty->buf.head) != NULL && !tbuf->active) {
+ while((tbuf = tty->buf.head) != NULL) {
+ while ((count = tbuf->commit - tbuf->read) != 0) {
+ char_buf = tbuf->char_buf_ptr + tbuf->read;
+ flag_buf = tbuf->flag_buf_ptr + tbuf->read;
+ tbuf->read += count;
+ spin_unlock_irqrestore(&tty->buf.lock, flags);
+ disc->receive_buf(tty, char_buf, flag_buf, count);
+ spin_lock_irqsave(&tty->buf.lock, flags);
+ }
+ if (tbuf->active)
+ break;
tty->buf.head = tbuf->next;
if (tty->buf.head == NULL)
tty->buf.tail = NULL;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- /* printk("Process buffer %p for %d\n", tbuf, tbuf->used); */
- disc->receive_buf(tty, tbuf->char_buf_ptr,
- tbuf->flag_buf_ptr,
- tbuf->used);
- spin_lock_irqsave(&tty->buf.lock, flags);
tty_buffer_free(tty, tbuf);
}
spin_unlock_irqrestore(&tty->buf.lock, flags);
{
unsigned long flags;
spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
+ if (tty->buf.tail != NULL) {
tty->buf.tail->active = 0;
+ tty->buf.tail->commit = tty->buf.tail->used;
+ }
spin_unlock_irqrestore(&tty->buf.lock, flags);
if (tty->low_latency)
* More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/
*/
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/jiffies.h>
-#include <linux/config.h>
-#include <linux/wait.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/reboot.h>
+#include <linux/config.h> /* For CONFIG_WATCHDOG_NOWAYOUT/... */
+#include <linux/module.h> /* For module specific items */
+#include <linux/moduleparam.h> /* For new moduleparam's */
+#include <linux/types.h> /* For standard types (like size_t) */
+#include <linux/errno.h> /* For the -ENODEV/... values */
+#include <linux/kernel.h> /* For printk/panic/... */
+#include <linux/delay.h> /* For mdelay function */
+#include <linux/timer.h> /* For timer related operations */
+#include <linux/jiffies.h> /* For jiffies stuff */
+#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/watchdog.h> /* For the watchdog specific items */
+#include <linux/notifier.h> /* For notifier support */
+#include <linux/reboot.h> /* For reboot_notifier stuff */
+#include <linux/init.h> /* For __init/__exit/... */
+#include <linux/fs.h> /* For file operations */
+#include <linux/ioport.h> /* For io-port access */
+#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
#include <linux/sched.h> /* TASK_INTERRUPTIBLE, set_current_state() and friends */
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/slab.h> /* For kmalloc */
-#define WD_VER "1.16 (06/12/2004)"
-#define PFX "pcwd: "
+#include <asm/uaccess.h> /* For copy_to_user/put_user/... */
+#include <asm/io.h> /* For inb/outb/... */
+
+/* Module and version information */
+#define WATCHDOG_VERSION "1.16"
+#define WATCHDOG_DATE "03 Jan 2006"
+#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
+#define WATCHDOG_NAME "pcwd"
+#define PFX WATCHDOG_NAME ": "
+#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION " (" WATCHDOG_DATE ")\n"
+#define WD_VER WATCHDOG_VERSION " (" WATCHDOG_DATE ")"
/*
* It should be noted that PCWD_REVISION_B was removed because A and B
/*
* These are the defines that describe the control status bits for the
- * PC Watchdog card, revision A.
- */
+ * PCI-PC Watchdog card.
+*/
+/* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */
#define WD_WDRST 0x01 /* Previously reset state */
#define WD_T110 0x02 /* Temperature overheat sense */
#define WD_HRTBT 0x04 /* Heartbeat sense */
#define WD_RLY2 0x08 /* External relay triggered */
#define WD_SRLY2 0x80 /* Software external relay triggered */
-
-/*
- * These are the defines that describe the control status bits for the
- * PC Watchdog card, revision C.
- */
+/* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */
#define WD_REVC_WTRP 0x01 /* Watchdog Trip status */
#define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */
#define WD_REVC_TTRP 0x04 /* Temperature Trip status */
+/* Port 2 : Control Status #2 */
+#define WD_WDIS 0x10 /* Watchdog Disabled */
+#define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */
+#define WD_SSEL 0x40 /* Watchdog Switch Select (1:SW1 <-> 0:SW2) */
+#define WD_WCMD 0x80 /* Watchdog Command Mode */
/* max. time we give an ISA watchdog card to process a command */
/* 500ms for each 4 bit response (according to spec.) */
#define ISA_COMMAND_TIMEOUT 1000
/* Watchdog's internal commands */
-#define CMD_ISA_IDLE 0x00
-#define CMD_ISA_VERSION_INTEGER 0x01
-#define CMD_ISA_VERSION_TENTH 0x02
-#define CMD_ISA_VERSION_HUNDRETH 0x03
-#define CMD_ISA_VERSION_MINOR 0x04
-#define CMD_ISA_SWITCH_SETTINGS 0x05
-#define CMD_ISA_DELAY_TIME_2SECS 0x0A
-#define CMD_ISA_DELAY_TIME_4SECS 0x0B
-#define CMD_ISA_DELAY_TIME_8SECS 0x0C
+#define CMD_ISA_IDLE 0x00
+#define CMD_ISA_VERSION_INTEGER 0x01
+#define CMD_ISA_VERSION_TENTH 0x02
+#define CMD_ISA_VERSION_HUNDRETH 0x03
+#define CMD_ISA_VERSION_MINOR 0x04
+#define CMD_ISA_SWITCH_SETTINGS 0x05
+#define CMD_ISA_DELAY_TIME_2SECS 0x0A
+#define CMD_ISA_DELAY_TIME_4SECS 0x0B
+#define CMD_ISA_DELAY_TIME_8SECS 0x0C
/*
* We are using an kernel timer to do the pinging of the watchdog
/* internal variables */
static atomic_t open_allowed = ATOMIC_INIT(1);
static char expect_close;
-static struct timer_list timer;
-static unsigned long next_heartbeat;
static int temp_panic;
-static int revision; /* The card's revision */
-static int supports_temp; /* Wether or not the card has a temperature device */
-static int command_mode; /* Wether or not the card is in command mode */
-static int initial_status; /* The card's boot status */
-static int current_readport; /* The cards I/O address */
-static spinlock_t io_lock;
+static struct { /* this is private data for each ISA-PC watchdog card */
+ int revision; /* The card's revision */
+ int supports_temp; /* Wether or not the card has a temperature device */
+ int command_mode; /* Wether or not the card is in command mode */
+ int boot_status; /* The card's boot status */
+ int io_addr; /* The cards I/O address */
+ spinlock_t io_lock; /* the lock for io operations */
+ struct timer_list timer; /* The timer that pings the watchdog */
+ unsigned long next_heartbeat; /* the next_heartbeat for the timer */
+} pcwd_private;
/* module parameters */
#define WATCHDOG_HEARTBEAT 60 /* 60 sec default heartbeat */
int port0, last_port0; /* Double read for stabilising */
/* The WCMD bit must be 1 and the command is only 4 bits in size */
- control_status = (cmd & 0x0F) | 0x80;
- outb_p(control_status, current_readport + 2);
+ control_status = (cmd & 0x0F) | WD_WCMD;
+ outb_p(control_status, pcwd_private.io_addr + 2);
udelay(ISA_COMMAND_TIMEOUT);
- port0 = inb_p(current_readport);
+ port0 = inb_p(pcwd_private.io_addr);
for (i = 0; i < 25; ++i) {
last_port0 = port0;
- port0 = inb_p(current_readport);
+ port0 = inb_p(pcwd_private.io_addr);
if (port0 == last_port0)
break; /* Data is stable */
int i, found=0, count=0;
/* Set the card into command mode */
- spin_lock(&io_lock);
+ spin_lock(&pcwd_private.io_lock);
while ((!found) && (count < 3)) {
i = send_isa_command(CMD_ISA_IDLE);
found = 1;
else if (i == 0xF3) {
/* Card does not like what we've done to it */
- outb_p(0x00, current_readport + 2);
+ outb_p(0x00, pcwd_private.io_addr + 2);
udelay(1200); /* Spec says wait 1ms */
- outb_p(0x00, current_readport + 2);
+ outb_p(0x00, pcwd_private.io_addr + 2);
udelay(ISA_COMMAND_TIMEOUT);
}
count++;
}
- spin_unlock(&io_lock);
- command_mode = found;
+ spin_unlock(&pcwd_private.io_lock);
+ pcwd_private.command_mode = found;
return(found);
}
static void unset_command_mode(void)
{
/* Set the card into normal mode */
- spin_lock(&io_lock);
- outb_p(0x00, current_readport + 2);
+ spin_lock(&pcwd_private.io_lock);
+ outb_p(0x00, pcwd_private.io_addr + 2);
udelay(ISA_COMMAND_TIMEOUT);
- spin_unlock(&io_lock);
+ spin_unlock(&pcwd_private.io_lock);
+
+ pcwd_private.command_mode = 0;
+}
+
+static inline void pcwd_check_temperature_support(void)
+{
+ if (inb(pcwd_private.io_addr) != 0xF0)
+ pcwd_private.supports_temp = 1;
+}
+
+static inline char *get_firmware(void)
+{
+ int one, ten, hund, minor;
+ char *ret;
+
+ ret = kmalloc(6, GFP_KERNEL);
+ if(ret == NULL)
+ return NULL;
+
+ if (set_command_mode()) {
+ one = send_isa_command(CMD_ISA_VERSION_INTEGER);
+ ten = send_isa_command(CMD_ISA_VERSION_TENTH);
+ hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
+ minor = send_isa_command(CMD_ISA_VERSION_MINOR);
+ sprintf(ret, "%c.%c%c%c", one, ten, hund, minor);
+ }
+ else
+ sprintf(ret, "ERROR");
+
+ unset_command_mode();
+ return(ret);
+}
+
+static inline int pcwd_get_option_switches(void)
+{
+ int option_switches=0;
+
+ if (set_command_mode()) {
+ /* Get switch settings */
+ option_switches = send_isa_command(CMD_ISA_SWITCH_SETTINGS);
+ }
+
+ unset_command_mode();
+ return(option_switches);
+}
+
+static void pcwd_show_card_info(void)
+{
+ char *firmware;
+ int option_switches;
+
+ /* Get some extra info from the hardware (in command/debug/diag mode) */
+ if (pcwd_private.revision == PCWD_REVISION_A)
+ printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr);
+ else if (pcwd_private.revision == PCWD_REVISION_C) {
+ firmware = get_firmware();
+ printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
+ pcwd_private.io_addr, firmware);
+ kfree(firmware);
+ option_switches = pcwd_get_option_switches();
+ printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+ option_switches,
+ ((option_switches & 0x10) ? "ON" : "OFF"),
+ ((option_switches & 0x08) ? "ON" : "OFF"));
+
+ /* Reprogram internal heartbeat to 2 seconds */
+ if (set_command_mode()) {
+ send_isa_command(CMD_ISA_DELAY_TIME_2SECS);
+ unset_command_mode();
+ }
+ }
+
+ if (pcwd_private.supports_temp)
+ printk(KERN_INFO PFX "Temperature Option Detected\n");
+
+ if (pcwd_private.boot_status & WDIOF_CARDRESET)
+ printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
+
+ if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
+ printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n");
+ printk(KERN_EMERG PFX "CPU Overheat\n");
+ }
- command_mode = 0;
+ if (pcwd_private.boot_status == 0)
+ printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
}
static void pcwd_timer_ping(unsigned long data)
/* If we got a heartbeat pulse within the WDT_INTERVAL
* we agree to ping the WDT */
- if(time_before(jiffies, next_heartbeat)) {
+ if(time_before(jiffies, pcwd_private.next_heartbeat)) {
/* Ping the watchdog */
- spin_lock(&io_lock);
- if (revision == PCWD_REVISION_A) {
+ spin_lock(&pcwd_private.io_lock);
+ if (pcwd_private.revision == PCWD_REVISION_A) {
/* Rev A cards are reset by setting the WD_WDRST bit in register 1 */
- wdrst_stat = inb_p(current_readport);
+ wdrst_stat = inb_p(pcwd_private.io_addr);
wdrst_stat &= 0x0F;
wdrst_stat |= WD_WDRST;
- outb_p(wdrst_stat, current_readport + 1);
+ outb_p(wdrst_stat, pcwd_private.io_addr + 1);
} else {
/* Re-trigger watchdog by writing to port 0 */
- outb_p(0x00, current_readport);
+ outb_p(0x00, pcwd_private.io_addr);
}
/* Re-set the timer interval */
- mod_timer(&timer, jiffies + WDT_INTERVAL);
+ mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
- spin_unlock(&io_lock);
+ spin_unlock(&pcwd_private.io_lock);
} else {
printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n");
}
{
int stat_reg;
- next_heartbeat = jiffies + (heartbeat * HZ);
+ pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
/* Start the timer */
- mod_timer(&timer, jiffies + WDT_INTERVAL);
+ mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
/* Enable the port */
- if (revision == PCWD_REVISION_C) {
- spin_lock(&io_lock);
- outb_p(0x00, current_readport + 3);
+ if (pcwd_private.revision == PCWD_REVISION_C) {
+ spin_lock(&pcwd_private.io_lock);
+ outb_p(0x00, pcwd_private.io_addr + 3);
udelay(ISA_COMMAND_TIMEOUT);
- stat_reg = inb_p(current_readport + 2);
- spin_unlock(&io_lock);
- if (stat_reg & 0x10) {
+ stat_reg = inb_p(pcwd_private.io_addr + 2);
+ spin_unlock(&pcwd_private.io_lock);
+ if (stat_reg & WD_WDIS) {
printk(KERN_INFO PFX "Could not start watchdog\n");
return -EIO;
}
int stat_reg;
/* Stop the timer */
- del_timer(&timer);
+ del_timer(&pcwd_private.timer);
/* Disable the board */
- if (revision == PCWD_REVISION_C) {
- spin_lock(&io_lock);
- outb_p(0xA5, current_readport + 3);
+ if (pcwd_private.revision == PCWD_REVISION_C) {
+ spin_lock(&pcwd_private.io_lock);
+ outb_p(0xA5, pcwd_private.io_addr + 3);
udelay(ISA_COMMAND_TIMEOUT);
- outb_p(0xA5, current_readport + 3);
+ outb_p(0xA5, pcwd_private.io_addr + 3);
udelay(ISA_COMMAND_TIMEOUT);
- stat_reg = inb_p(current_readport + 2);
- spin_unlock(&io_lock);
- if ((stat_reg & 0x10) == 0) {
+ stat_reg = inb_p(pcwd_private.io_addr + 2);
+ spin_unlock(&pcwd_private.io_lock);
+ if ((stat_reg & WD_WDIS) == 0) {
printk(KERN_INFO PFX "Could not stop watchdog\n");
return -EIO;
}
static int pcwd_keepalive(void)
{
/* user land ping */
- next_heartbeat = jiffies + (heartbeat * HZ);
+ pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
return 0;
}
int card_status;
*status=0;
- spin_lock(&io_lock);
- if (revision == PCWD_REVISION_A)
+ spin_lock(&pcwd_private.io_lock);
+ if (pcwd_private.revision == PCWD_REVISION_A)
/* Rev A cards return status information from
* the base register, which is used for the
* temperature in other cards. */
- card_status = inb(current_readport);
+ card_status = inb(pcwd_private.io_addr);
else {
/* Rev C cards return card status in the base
* address + 1 register. And use different bits
* to indicate a card initiated reset, and an
* over-temperature condition. And the reboot
* status can be reset. */
- card_status = inb(current_readport + 1);
+ card_status = inb(pcwd_private.io_addr + 1);
}
- spin_unlock(&io_lock);
+ spin_unlock(&pcwd_private.io_lock);
- if (revision == PCWD_REVISION_A) {
+ if (pcwd_private.revision == PCWD_REVISION_A) {
if (card_status & WD_WDRST)
*status |= WDIOF_CARDRESET;
static int pcwd_clear_status(void)
{
- if (revision == PCWD_REVISION_C) {
- spin_lock(&io_lock);
- outb_p(0x00, current_readport + 1); /* clear reset status */
- spin_unlock(&io_lock);
+ if (pcwd_private.revision == PCWD_REVISION_C) {
+ spin_lock(&pcwd_private.io_lock);
+ outb_p(0x00, pcwd_private.io_addr + 1); /* clear reset status */
+ spin_unlock(&pcwd_private.io_lock);
}
return 0;
}
static int pcwd_get_temperature(int *temperature)
{
/* check that port 0 gives temperature info and no command results */
- if (command_mode)
+ if (pcwd_private.command_mode)
return -1;
*temperature = 0;
- if (!supports_temp)
+ if (!pcwd_private.supports_temp)
return -ENODEV;
/*
* Convert celsius to fahrenheit, since this was
* the decided 'standard' for this return value.
*/
- spin_lock(&io_lock);
- *temperature = ((inb(current_readport)) * 9 / 5) + 32;
- spin_unlock(&io_lock);
+ spin_lock(&pcwd_private.io_lock);
+ *temperature = ((inb(pcwd_private.io_addr)) * 9 / 5) + 32;
+ spin_unlock(&pcwd_private.io_lock);
return 0;
}
return put_user(status, argp);
case WDIOC_GETBOOTSTATUS:
- return put_user(initial_status, argp);
+ return put_user(pcwd_private.boot_status, argp);
case WDIOC_GETTEMP:
if (pcwd_get_temperature(&temperature))
return put_user(temperature, argp);
case WDIOC_SETOPTIONS:
- if (revision == PCWD_REVISION_C)
+ if (pcwd_private.revision == PCWD_REVISION_C)
{
if(copy_from_user(&rv, argp, sizeof(int)))
return -EFAULT;
static int pcwd_temp_open(struct inode *inode, struct file *file)
{
- if (!supports_temp)
+ if (!pcwd_private.supports_temp)
return -ENODEV;
return nonseekable_open(inode, file);
* Init & exit routines
*/
-static inline void get_support(void)
-{
- if (inb(current_readport) != 0xF0)
- supports_temp = 1;
-}
-
static inline int get_revision(void)
{
int r = PCWD_REVISION_C;
- spin_lock(&io_lock);
+ spin_lock(&pcwd_private.io_lock);
/* REV A cards use only 2 io ports; test
* presumes a floating bus reads as 0xff. */
- if ((inb(current_readport + 2) == 0xFF) ||
- (inb(current_readport + 3) == 0xFF))
+ if ((inb(pcwd_private.io_addr + 2) == 0xFF) ||
+ (inb(pcwd_private.io_addr + 3) == 0xFF))
r=PCWD_REVISION_A;
- spin_unlock(&io_lock);
+ spin_unlock(&pcwd_private.io_lock);
return r;
}
-static inline char *get_firmware(void)
-{
- int one, ten, hund, minor;
- char *ret;
-
- ret = kmalloc(6, GFP_KERNEL);
- if(ret == NULL)
- return NULL;
-
- if (set_command_mode()) {
- one = send_isa_command(CMD_ISA_VERSION_INTEGER);
- ten = send_isa_command(CMD_ISA_VERSION_TENTH);
- hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
- minor = send_isa_command(CMD_ISA_VERSION_MINOR);
- sprintf(ret, "%c.%c%c%c", one, ten, hund, minor);
- }
- else
- sprintf(ret, "ERROR");
-
- unset_command_mode();
- return(ret);
-}
-
-static inline int get_option_switches(void)
-{
- int rv=0;
-
- if (set_command_mode()) {
- /* Get switch settings */
- rv = send_isa_command(CMD_ISA_SWITCH_SETTINGS);
- }
-
- unset_command_mode();
- return(rv);
-}
-
static int __devinit pcwatchdog_init(int base_addr)
{
int ret;
- char *firmware;
- int option_switches;
cards_found++;
if (cards_found == 1)
printk(KERN_ERR PFX "No I/O-Address for card detected\n");
return -ENODEV;
}
- current_readport = base_addr;
+ pcwd_private.io_addr = base_addr;
/* Check card's revision */
- revision = get_revision();
+ pcwd_private.revision = get_revision();
- if (!request_region(current_readport, (revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
+ if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
- current_readport);
- current_readport = 0x0000;
+ pcwd_private.io_addr);
+ pcwd_private.io_addr = 0x0000;
return -EIO;
}
/* Initial variables */
- supports_temp = 0;
+ pcwd_private.supports_temp = 0;
temp_panic = 0;
- initial_status = 0x0000;
+ pcwd_private.boot_status = 0x0000;
/* get the boot_status */
- pcwd_get_status(&initial_status);
+ pcwd_get_status(&pcwd_private.boot_status);
/* clear the "card caused reboot" flag */
pcwd_clear_status();
- init_timer(&timer);
- timer.function = pcwd_timer_ping;
- timer.data = 0;
+ init_timer(&pcwd_private.timer);
+ pcwd_private.timer.function = pcwd_timer_ping;
+ pcwd_private.timer.data = 0;
/* Disable the board */
pcwd_stop();
/* Check whether or not the card supports the temperature device */
- get_support();
-
- /* Get some extra info from the hardware (in command/debug/diag mode) */
- if (revision == PCWD_REVISION_A)
- printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", current_readport);
- else if (revision == PCWD_REVISION_C) {
- firmware = get_firmware();
- printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
- current_readport, firmware);
- kfree(firmware);
- option_switches = get_option_switches();
- printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
- option_switches,
- ((option_switches & 0x10) ? "ON" : "OFF"),
- ((option_switches & 0x08) ? "ON" : "OFF"));
-
- /* Reprogram internal heartbeat to 2 seconds */
- if (set_command_mode()) {
- send_isa_command(CMD_ISA_DELAY_TIME_2SECS);
- unset_command_mode();
- }
- } else {
- /* Should NEVER happen, unless get_revision() fails. */
- printk(KERN_INFO PFX "Unable to get revision\n");
- release_region(current_readport, (revision == PCWD_REVISION_A) ? 2 : 4);
- current_readport = 0x0000;
- return -1;
- }
+ pcwd_check_temperature_support();
- if (supports_temp)
- printk(KERN_INFO PFX "Temperature Option Detected\n");
-
- if (initial_status & WDIOF_CARDRESET)
- printk(KERN_INFO PFX "Previous reboot was caused by the card\n");
-
- if (initial_status & WDIOF_OVERHEAT) {
- printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n");
- printk(KERN_EMERG PFX "CPU Overheat\n");
- }
-
- if (initial_status == 0)
- printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
+ /* Show info about the card itself */
+ pcwd_show_card_info();
/* Check that the heartbeat value is within it's range ; if not reset to the default */
- if (pcwd_set_heartbeat(heartbeat)) {
- pcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
- printk(KERN_INFO PFX "heartbeat value must be 2<=heartbeat<=7200, using %d\n",
- WATCHDOG_HEARTBEAT);
+ if (pcwd_set_heartbeat(heartbeat)) {
+ pcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
+ printk(KERN_INFO PFX "heartbeat value must be 2<=heartbeat<=7200, using %d\n",
+ WATCHDOG_HEARTBEAT);
}
ret = register_reboot_notifier(&pcwd_notifier);
if (ret) {
printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
ret);
- release_region(current_readport, (revision == PCWD_REVISION_A) ? 2 : 4);
- current_readport = 0x0000;
+ release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+ pcwd_private.io_addr = 0x0000;
return ret;
}
- if (supports_temp) {
+ if (pcwd_private.supports_temp) {
ret = misc_register(&temp_miscdev);
if (ret) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, ret);
unregister_reboot_notifier(&pcwd_notifier);
- release_region(current_readport, (revision == PCWD_REVISION_A) ? 2 : 4);
- current_readport = 0x0000;
+ release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+ pcwd_private.io_addr = 0x0000;
return ret;
}
}
if (ret) {
printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
- if (supports_temp)
+ if (pcwd_private.supports_temp)
misc_deregister(&temp_miscdev);
unregister_reboot_notifier(&pcwd_notifier);
- release_region(current_readport, (revision == PCWD_REVISION_A) ? 2 : 4);
- current_readport = 0x0000;
+ release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+ pcwd_private.io_addr = 0x0000;
return ret;
}
/* Deregister */
misc_deregister(&pcwd_miscdev);
- if (supports_temp)
+ if (pcwd_private.supports_temp)
misc_deregister(&temp_miscdev);
unregister_reboot_notifier(&pcwd_notifier);
- release_region(current_readport, (revision == PCWD_REVISION_A) ? 2 : 4);
- current_readport = 0x0000;
+ release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+ pcwd_private.io_addr = 0x0000;
+ cards_found--;
}
/*
{
int i, found = 0;
- spin_lock_init(&io_lock);
+ spin_lock_init(&pcwd_private.io_lock);
for (i = 0; pcwd_ioports[i] != 0; i++) {
if (pcwd_checkcard(pcwd_ioports[i])) {
static void __exit pcwd_cleanup_module(void)
{
- if (current_readport)
+ if (pcwd_private.io_addr)
pcwatchdog_exit();
return;
}
{
int ret = -ENOIOCTLCMD;
int time;
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
switch (cmd) {
case WDIOC_GETSUPPORT:
- ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
+ ret = copy_to_user(argp, &ident,
sizeof(ident)) ? -EFAULT : 0;
break;
case WDIOC_GETSTATUS:
- ret = put_user(0, (int __user *)arg);
+ ret = put_user(0, p);
break;
case WDIOC_GETBOOTSTATUS:
- ret = put_user(boot_status, (int __user *)arg);
+ ret = put_user(boot_status, p);
break;
case WDIOC_SETTIMEOUT:
- ret = get_user(time, (int __user *)arg);
+ ret = get_user(time, p);
if (ret)
break;
/*fall through*/
case WDIOC_GETTIMEOUT:
- ret = put_user(pre_margin / OSCR_FREQ, (int __user *)arg);
+ ret = put_user(pre_margin / OSCR_FREQ, p);
break;
case WDIOC_KEEPALIVE:
* level driver of CPUFreq support, and its spinlock. This lock
* also protects the cpufreq_cpu_data array.
*/
-static struct cpufreq_driver *cpufreq_driver;
-static struct cpufreq_policy *cpufreq_cpu_data[NR_CPUS];
+static struct cpufreq_driver *cpufreq_driver;
+static struct cpufreq_policy *cpufreq_cpu_data[NR_CPUS];
static DEFINE_SPINLOCK(cpufreq_driver_lock);
/* internal prototypes */
* changes to devices when the CPU clock speed changes.
* The mutex locks both lists.
*/
-static struct notifier_block *cpufreq_policy_notifier_list;
-static struct notifier_block *cpufreq_transition_notifier_list;
-static DECLARE_RWSEM (cpufreq_notifier_rwsem);
+static struct notifier_block *cpufreq_policy_notifier_list;
+static struct notifier_block *cpufreq_transition_notifier_list;
+static DECLARE_RWSEM (cpufreq_notifier_rwsem);
static LIST_HEAD(cpufreq_governor_list);
-static DEFINE_MUTEX (cpufreq_governor_mutex);
+static DEFINE_MUTEX (cpufreq_governor_mutex);
-struct cpufreq_policy * cpufreq_cpu_get(unsigned int cpu)
+struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
{
struct cpufreq_policy *data;
unsigned long flags;
if (!kobject_get(&data->kobj))
goto err_out_put_module;
-
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
-
return data;
- err_out_put_module:
+err_out_put_module:
module_put(cpufreq_driver->owner);
- err_out_unlock:
+err_out_unlock:
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- err_out:
+err_out:
return NULL;
}
EXPORT_SYMBOL_GPL(cpufreq_cpu_get);
+
void cpufreq_cpu_put(struct cpufreq_policy *data)
{
kobject_put(&data->kobj);
/**
- * cpufreq_notify_transition - call notifier chain and adjust_jiffies on frequency transition
+ * cpufreq_notify_transition - call notifier chain and adjust_jiffies
+ * on frequency transition.
*
- * This function calls the transition notifiers and the "adjust_jiffies" function. It is called
- * twice on all CPU frequency changes that have external effects.
+ * This function calls the transition notifiers and the "adjust_jiffies"
+ * function. It is called twice on all CPU frequency changes that have
+ * external effects.
*/
void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
{
+ struct cpufreq_policy *policy;
+
BUG_ON(irqs_disabled());
freqs->flags = cpufreq_driver->flags;
- dprintk("notification %u of frequency transition to %u kHz\n", state, freqs->new);
+ dprintk("notification %u of frequency transition to %u kHz\n",
+ state, freqs->new);
down_read(&cpufreq_notifier_rwsem);
+
+ policy = cpufreq_cpu_data[freqs->cpu];
switch (state) {
+
case CPUFREQ_PRECHANGE:
- /* detect if the driver reported a value as "old frequency" which
- * is not equal to what the cpufreq core thinks is "old frequency".
+ /* detect if the driver reported a value as "old frequency"
+ * which is not equal to what the cpufreq core thinks is
+ * "old frequency".
*/
if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- if ((likely(cpufreq_cpu_data[freqs->cpu])) &&
- (likely(cpufreq_cpu_data[freqs->cpu]->cpu == freqs->cpu)) &&
- (likely(cpufreq_cpu_data[freqs->cpu]->cur)) &&
- (unlikely(freqs->old != cpufreq_cpu_data[freqs->cpu]->cur)))
- {
- dprintk(KERN_WARNING "Warning: CPU frequency is %u, "
- "cpufreq assumed %u kHz.\n", freqs->old, cpufreq_cpu_data[freqs->cpu]->cur);
- freqs->old = cpufreq_cpu_data[freqs->cpu]->cur;
+ if ((policy) && (policy->cpu == freqs->cpu) &&
+ (policy->cur) && (policy->cur != freqs->old)) {
+ dprintk(KERN_WARNING "Warning: CPU frequency is"
+ " %u, cpufreq assumed %u kHz.\n",
+ freqs->old, policy->cur);
+ freqs->old = policy->cur;
}
}
- notifier_call_chain(&cpufreq_transition_notifier_list, CPUFREQ_PRECHANGE, freqs);
+ notifier_call_chain(&cpufreq_transition_notifier_list,
+ CPUFREQ_PRECHANGE, freqs);
adjust_jiffies(CPUFREQ_PRECHANGE, freqs);
break;
+
case CPUFREQ_POSTCHANGE:
adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
- notifier_call_chain(&cpufreq_transition_notifier_list, CPUFREQ_POSTCHANGE, freqs);
- if ((likely(cpufreq_cpu_data[freqs->cpu])) &&
- (likely(cpufreq_cpu_data[freqs->cpu]->cpu == freqs->cpu)))
- cpufreq_cpu_data[freqs->cpu]->cur = freqs->new;
+ notifier_call_chain(&cpufreq_transition_notifier_list,
+ CPUFREQ_POSTCHANGE, freqs);
+ if (likely(policy) && likely(policy->cpu == freqs->cpu))
+ policy->cur = freqs->new;
break;
}
up_read(&cpufreq_notifier_rwsem);
return 0;
}
}
- out:
+out:
mutex_unlock(&cpufreq_governor_mutex);
}
return -EINVAL;
return -EINVAL;
ret = cpufreq_set_policy(&new_policy);
-
return ret ? ret : count;
}
goto out;
i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
}
- out:
+out:
i += sprintf(&buf[i], "\n");
return i;
}
kfree(data);
cpufreq_debug_enable_ratelimit();
-
return 0;
}
ret = cpufreq_driver->get(cpu);
- if (ret && policy->cur && !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS))
- {
+ if (ret && policy->cur && !(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
/* verify no discrepancy between actual and saved value exists */
if (unlikely(ret != policy->cur)) {
cpufreq_out_of_sync(cpu, policy->cur, ret);
mutex_unlock(&policy->lock);
- out:
+out:
cpufreq_cpu_put(policy);
return (ret);
cpu_policy->cur = cur_freq;
}
- out:
+out:
cpufreq_cpu_put(cpu_policy);
return 0;
}
mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
-
return ret;
}
EXPORT_SYMBOL_GPL(cpufreq_driver_target);
mutex_unlock(&policy->lock);
cpufreq_cpu_put(policy);
-
return ret;
}
EXPORT_SYMBOL_GPL(cpufreq_governor);
list_add(&governor->governor_list, &cpufreq_governor_list);
mutex_unlock(&cpufreq_governor_mutex);
-
return 0;
}
EXPORT_SYMBOL_GPL(cpufreq_register_governor);
mutex_unlock(&cpu_policy->lock);
cpufreq_cpu_put(cpu_policy);
-
return 0;
}
EXPORT_SYMBOL(cpufreq_get_policy);
dprintk("setting new policy for CPU %u: %u - %u kHz\n", policy->cpu,
policy->min, policy->max);
- memcpy(&policy->cpuinfo,
- &data->cpuinfo,
- sizeof(struct cpufreq_cpuinfo));
+ memcpy(&policy->cpuinfo, &data->cpuinfo, sizeof(struct cpufreq_cpuinfo));
/* verify the cpu speed can be set within this limit */
ret = cpufreq_driver->verify(policy);
up_read(&cpufreq_notifier_rwsem);
- data->min = policy->min;
- data->max = policy->max;
+ data->min = policy->min;
+ data->max = policy->max;
dprintk("new min and max freqs are %u - %u kHz\n", data->min, data->max);
__cpufreq_governor(data, CPUFREQ_GOV_LIMITS);
}
- error_out:
+error_out:
cpufreq_debug_enable_ratelimit();
return ret;
}
mutex_lock(&data->lock);
dprintk("updating policy for CPU %u\n", cpu);
- memcpy(&policy,
- data,
- sizeof(struct cpufreq_policy));
+ memcpy(&policy, data, sizeof(struct cpufreq_policy));
policy.min = data->user_policy.min;
policy.max = data->user_policy.max;
policy.policy = data->user_policy.policy;
-> ask driver for current freq and notify governors about a change */
if (cpufreq_driver->get) {
policy.cur = cpufreq_driver->get(cpu);
- if (data->cur != policy.cur)
- cpufreq_out_of_sync(cpu, data->cur, policy.cur);
+ if (!data->cur) {
+ dprintk("Driver did not initialize current freq");
+ data->cur = policy.cur;
+ } else {
+ if (data->cur != policy.cur)
+ cpufreq_out_of_sync(cpu, data->cur, policy.cur);
+ }
}
ret = __cpufreq_set_policy(data, &policy);
static void __exit sm_it87_exit(void)
{
- i2c_isa_del_driver(&it87_isa_driver);
+ if (isa_address)
+ i2c_isa_del_driver(&it87_isa_driver);
i2c_del_driver(&it87_driver);
}
show_temp, NULL, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
show_temp_max, set_temp_max, offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
+static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp_min, set_temp_min, offset - 1)
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp0, NULL);
static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp0_max, set_temp0_max);
-static DEVICE_ATTR(temp1_min, S_IRUGO | S_IWUSR, show_temp0_min, set_temp0_min);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp0_min, set_temp0_min);
define_temperature_sysfs(2);
define_temperature_sysfs(3);
define_temperature_sysfs(6);
#define CFG_INFO_TEMP(id) { &sensor_dev_attr_temp##id##_input.dev_attr, \
- &sensor_dev_attr_temp##id##_min.dev_attr, \
+ &sensor_dev_attr_temp##id##_max_hyst.dev_attr, \
&sensor_dev_attr_temp##id##_max.dev_attr }
#define CFG_INFO_VOLT(id) { &sensor_dev_attr_in##id##_input.dev_attr, \
&sensor_dev_attr_in##id##_min.dev_attr, \
};
static struct str_device_attr_table cfg_info_temp[] = {
- { &dev_attr_temp1_input, &dev_attr_temp1_min, &dev_attr_temp1_max },
+ { &dev_attr_temp1_input, &dev_attr_temp1_max_hyst, &dev_attr_temp1_max },
CFG_INFO_TEMP(2),
CFG_INFO_TEMP(3),
CFG_INFO_TEMP(4),
(0x39)))
#define W83781D_REG_CONFIG 0x40
+
+/* Interrupt status (W83781D, AS99127F) */
#define W83781D_REG_ALARM1 0x41
#define W83781D_REG_ALARM2 0x42
-#define W83781D_REG_ALARM3 0x450 /* not on W83781D */
-#define W83781D_REG_IRQ 0x4C
+/* Real-time status (W83782D, W83783S, W83627HF) */
+#define W83782D_REG_ALARM1 0x459
+#define W83782D_REG_ALARM2 0x45A
+#define W83782D_REG_ALARM3 0x45B
+
#define W83781D_REG_BEEP_CONFIG 0x4D
#define W83781D_REG_BEEP_INTS1 0x56
#define W83781D_REG_BEEP_INTS2 0x57
W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
}
}
-
- if (type != w83781d) {
- /* enable comparator mode for temp2 and temp3 so
- alarm indication will work correctly */
- i = w83781d_read_value(client, W83781D_REG_IRQ);
- if (!(i & 0x40))
- w83781d_write_value(client, W83781D_REG_IRQ,
- i | 0x40);
- }
}
/* Start monitoring */
data->fan_div[1] |= (i >> 4) & 0x04;
data->fan_div[2] |= (i >> 5) & 0x04;
}
- data->alarms =
- w83781d_read_value(client,
- W83781D_REG_ALARM1) +
- (w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
if ((data->type == w83782d) || (data->type == w83627hf)) {
- data->alarms |=
- w83781d_read_value(client,
- W83781D_REG_ALARM3) << 16;
+ data->alarms = w83781d_read_value(client,
+ W83782D_REG_ALARM1)
+ | (w83781d_read_value(client,
+ W83782D_REG_ALARM2) << 8)
+ | (w83781d_read_value(client,
+ W83782D_REG_ALARM3) << 16);
+ } else if (data->type == w83783s) {
+ data->alarms = w83781d_read_value(client,
+ W83782D_REG_ALARM1)
+ | (w83781d_read_value(client,
+ W83782D_REG_ALARM2) << 8);
+ } else {
+ /* No real-time status registers, fall back to
+ interrupt status registers */
+ data->alarms = w83781d_read_value(client,
+ W83781D_REG_ALARM1)
+ | (w83781d_read_value(client,
+ W83781D_REG_ALARM2) << 8);
}
i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
data->beep_enable = i >> 7;
}
static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
-static int i2c_isa_device_probe(struct device *dev)
-{
- return -ENODEV;
-}
-
-static int i2c_isa_device_remove(struct device *dev)
-{
- return 0;
-}
-
/* We implement an interface which resembles i2c_{add,del}_driver,
but for i2c-isa drivers. We don't have to remember and handle lists
/* Add the driver to the list of i2c drivers in the driver core */
driver->driver.bus = &i2c_bus_type;
- driver->driver.probe = i2c_isa_device_probe;
- driver->driver.remove = i2c_isa_device_remove;
res = driver_register(&driver->driver);
if (res)
return res;
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
+#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/errno.h>
if (rq->bio) /* fs request */
rq->errors = 0;
+ touch_softlockup_watchdog();
+
switch (drive->hwif->data_phase) {
case TASKFILE_MULTI_IN:
case TASKFILE_MULTI_OUT:
struct ib_wc mad_wc;
struct ib_send_wr *send_wr = &mad_send_wr->send_wr;
- if (!smi_handle_dr_smp_send(smp, device->node_type, port_num)) {
+ /*
+ * Directed route handling starts if the initial LID routed part of
+ * a request or the ending LID routed part of a response is empty.
+ * If we are at the start of the LID routed part, don't update the
+ * hop_ptr or hop_cnt. See section 14.2.2, Vol 1 IB spec.
+ */
+ if ((ib_get_smp_direction(smp) ? smp->dr_dlid : smp->dr_slid) ==
+ IB_LID_PERMISSIVE &&
+ !smi_handle_dr_smp_send(smp, device->node_type, port_num)) {
ret = -EINVAL;
printk(KERN_ERR PFX "Invalid directed route\n");
goto out;
MTHCA_GET(size, outbox, QUERY_DEV_LIM_UAR_ENTRY_SZ_OFFSET);
dev_lim->uar_scratch_entry_sz = size;
- mthca_dbg(dev, "Max QPs: %d, reserved QPs: %d, entry size: %d\n",
- dev_lim->max_qps, dev_lim->reserved_qps, dev_lim->qpc_entry_sz);
- mthca_dbg(dev, "Max SRQs: %d, reserved SRQs: %d, entry size: %d\n",
- dev_lim->max_srqs, dev_lim->reserved_srqs, dev_lim->srq_entry_sz);
- mthca_dbg(dev, "Max CQs: %d, reserved CQs: %d, entry size: %d\n",
- dev_lim->max_cqs, dev_lim->reserved_cqs, dev_lim->cqc_entry_sz);
- mthca_dbg(dev, "Max EQs: %d, reserved EQs: %d, entry size: %d\n",
- dev_lim->max_eqs, dev_lim->reserved_eqs, dev_lim->eqc_entry_sz);
- mthca_dbg(dev, "reserved MPTs: %d, reserved MTTs: %d\n",
- dev_lim->reserved_mrws, dev_lim->reserved_mtts);
- mthca_dbg(dev, "Max PDs: %d, reserved PDs: %d, reserved UARs: %d\n",
- dev_lim->max_pds, dev_lim->reserved_pds, dev_lim->reserved_uars);
- mthca_dbg(dev, "Max QP/MCG: %d, reserved MGMs: %d\n",
- dev_lim->max_pds, dev_lim->reserved_mgms);
- mthca_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n",
- dev_lim->max_cq_sz, dev_lim->max_qp_sz, dev_lim->max_srq_sz);
-
- mthca_dbg(dev, "Flags: %08x\n", dev_lim->flags);
-
if (mthca_is_memfree(dev)) {
MTHCA_GET(field, outbox, QUERY_DEV_LIM_MAX_SRQ_SZ_OFFSET);
dev_lim->max_srq_sz = 1 << field;
dev_lim->mpt_entry_sz = MTHCA_MPT_ENTRY_SIZE;
}
+ mthca_dbg(dev, "Max QPs: %d, reserved QPs: %d, entry size: %d\n",
+ dev_lim->max_qps, dev_lim->reserved_qps, dev_lim->qpc_entry_sz);
+ mthca_dbg(dev, "Max SRQs: %d, reserved SRQs: %d, entry size: %d\n",
+ dev_lim->max_srqs, dev_lim->reserved_srqs, dev_lim->srq_entry_sz);
+ mthca_dbg(dev, "Max CQs: %d, reserved CQs: %d, entry size: %d\n",
+ dev_lim->max_cqs, dev_lim->reserved_cqs, dev_lim->cqc_entry_sz);
+ mthca_dbg(dev, "Max EQs: %d, reserved EQs: %d, entry size: %d\n",
+ dev_lim->max_eqs, dev_lim->reserved_eqs, dev_lim->eqc_entry_sz);
+ mthca_dbg(dev, "reserved MPTs: %d, reserved MTTs: %d\n",
+ dev_lim->reserved_mrws, dev_lim->reserved_mtts);
+ mthca_dbg(dev, "Max PDs: %d, reserved PDs: %d, reserved UARs: %d\n",
+ dev_lim->max_pds, dev_lim->reserved_pds, dev_lim->reserved_uars);
+ mthca_dbg(dev, "Max QP/MCG: %d, reserved MGMs: %d\n",
+ dev_lim->max_pds, dev_lim->reserved_mgms);
+ mthca_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n",
+ dev_lim->max_cq_sz, dev_lim->max_qp_sz, dev_lim->max_srq_sz);
+
+ mthca_dbg(dev, "Flags: %08x\n", dev_lim->flags);
+
out:
mthca_free_mailbox(dev, mailbox);
return err;
#define DRV_NAME "ib_mthca"
#define PFX DRV_NAME ": "
-#define DRV_VERSION "0.06"
-#define DRV_RELDATE "June 23, 2005"
+#define DRV_VERSION "0.07"
+#define DRV_RELDATE "February 13, 2006"
enum {
MTHCA_FLAG_DDR_HIDDEN = 1 << 1,
IPOIB_FLAG_SUBINTERFACE = 4,
IPOIB_MCAST_RUN = 5,
IPOIB_STOP_REAPER = 6,
+ IPOIB_MCAST_STARTED = 7,
IPOIB_MAX_BACKOFF_SECONDS = 16,
}
if (!priv->broadcast) {
- priv->broadcast = ipoib_mcast_alloc(dev, 1);
- if (!priv->broadcast) {
+ struct ipoib_mcast *broadcast;
+
+ broadcast = ipoib_mcast_alloc(dev, 1);
+ if (!broadcast) {
ipoib_warn(priv, "failed to allocate broadcast group\n");
mutex_lock(&mcast_mutex);
if (test_bit(IPOIB_MCAST_RUN, &priv->flags))
return;
}
- memcpy(priv->broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
+ spin_lock_irq(&priv->lock);
+ memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid));
+ priv->broadcast = broadcast;
- spin_lock_irq(&priv->lock);
__ipoib_mcast_add(dev, priv->broadcast);
spin_unlock_irq(&priv->lock);
}
queue_work(ipoib_workqueue, &priv->mcast_task);
mutex_unlock(&mcast_mutex);
+ spin_lock_irq(&priv->lock);
+ set_bit(IPOIB_MCAST_STARTED, &priv->flags);
+ spin_unlock_irq(&priv->lock);
+
return 0;
}
ipoib_dbg_mcast(priv, "stopping multicast thread\n");
+ spin_lock_irq(&priv->lock);
+ clear_bit(IPOIB_MCAST_STARTED, &priv->flags);
+ spin_unlock_irq(&priv->lock);
+
mutex_lock(&mcast_mutex);
clear_bit(IPOIB_MCAST_RUN, &priv->flags);
cancel_delayed_work(&priv->mcast_task);
*/
spin_lock(&priv->lock);
+ if (!test_bit(IPOIB_MCAST_STARTED, &priv->flags) ||
+ !priv->broadcast ||
+ !test_bit(IPOIB_MCAST_FLAG_ATTACHED, &priv->broadcast->flags)) {
+ ++priv->stats.tx_dropped;
+ dev_kfree_skb_any(skb);
+ goto unlock;
+ }
+
mcast = __ipoib_mcast_find(dev, mgid);
if (!mcast) {
/* Let's create a new send only group now */
ipoib_send(dev, skb, mcast->ah, IB_MULTICAST_QPN);
}
+unlock:
spin_unlock(&priv->lock);
}
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
-obj-$(CONFIG_KEYBOARD_98KBD) += 98kbd.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
-obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <asm/hardware.h>
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
{ 88, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 96, 0, 0 },
{ 97, PS2PP_KIND_TP3, PS2PP_WHEEL | PS2PP_HWHEEL },
+ { 99, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 100, PS2PP_KIND_MX, /* MX510 */
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN },
size_t field_offset;
unsigned char command;
unsigned char mask;
+ unsigned char inverted;
};
static ssize_t trackpoint_show_int_attr(struct psmouse *psmouse, void *data, char *buf)
{
struct trackpoint_data *tp = psmouse->private;
struct trackpoint_attr_data *attr = data;
- unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset);
+ unsigned char value = *(unsigned char *)((char *)tp + attr->field_offset);
+
+ if (attr->inverted)
+ value = !value;
- return sprintf(buf, "%u\n", *field);
+ return sprintf(buf, "%u\n", value);
}
static ssize_t trackpoint_set_int_attr(struct psmouse *psmouse, void *data,
if (*rest || value > 1)
return -EINVAL;
+ if (attr->inverted)
+ value = !value;
+
if (*field != value) {
*field = value;
trackpoint_toggle_bit(&psmouse->ps2dev, attr->command, attr->mask);
}
-#define TRACKPOINT_BIT_ATTR(_name, _command, _mask) \
+#define TRACKPOINT_BIT_ATTR(_name, _command, _mask, _inv) \
static struct trackpoint_attr_data trackpoint_attr_##_name = { \
.field_offset = offsetof(struct trackpoint_data, _name), \
.command = _command, \
.mask = _mask, \
+ .inverted = _inv, \
}; \
PSMOUSE_DEFINE_ATTR(_name, S_IWUSR | S_IRUGO, \
&trackpoint_attr_##_name, \
TRACKPOINT_INT_ATTR(ztime, TP_Z_TIME);
TRACKPOINT_INT_ATTR(jenks, TP_JENKS_CURV);
-TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON);
-TRACKPOINT_BIT_ATTR(skipback, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK);
-TRACKPOINT_BIT_ATTR(ext_dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV);
+TRACKPOINT_BIT_ATTR(press_to_select, TP_TOGGLE_PTSON, TP_MASK_PTSON, 0);
+TRACKPOINT_BIT_ATTR(skipback, TP_TOGGLE_SKIPBACK, TP_MASK_SKIPBACK, 0);
+TRACKPOINT_BIT_ATTR(ext_dev, TP_TOGGLE_EXT_DEV, TP_MASK_EXT_DEV, 1);
static struct attribute *trackpoint_attrs[] = {
&psmouse_attr_sensitivity.dattr.attr,
#define TP_TOGGLE_MB 0x23 /* Disable/Enable Middle Button */
#define TP_MASK_MB 0x01
-#define TP_TOGGLE_EXT_DEV 0x23 /* Toggle external device */
+#define TP_TOGGLE_EXT_DEV 0x23 /* Disable external device */
#define TP_MASK_EXT_DEV 0x02
#define TP_TOGGLE_DRIFT 0x23 /* Drift Correction */
#define TP_MASK_DRIFT 0x80
#define TP_DEF_MB 0x00
#define TP_DEF_PTSON 0x00
#define TP_DEF_SKIPBACK 0x00
-#define TP_DEF_EXT_DEV 0x01
+#define TP_DEF_EXT_DEV 0x00 /* 0 means enabled */
#define MAKE_PS2_CMD(params, results, cmd) ((params<<12) | (results<<8) | (cmd))
obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
-obj-$(CONFIG_SERIO_98KBD) += 98kbd-io.o
obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o
obj-$(CONFIG_HP_SDC) += hp_sdc.o
obj-$(CONFIG_HIL_MLC) += hp_sdc_mlc.o hil_mlc.o
#define TS_POLL_PERIOD msecs_to_jiffies(10)
+/* this driver doesn't aim at the peak continuous sample rate */
+#define SAMPLE_BITS (8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
+
struct ts_event {
/* For portability, we can't read 12 bit values using SPI (which
* would make the controller deliver them as native byteorder u16
- * with msbs zeroed). Instead, we read them as two 8-byte values,
+ * with msbs zeroed). Instead, we read them as two 8-bit values,
* which need byteswapping then range adjustment.
*/
__be16 x;
};
struct ads7846 {
- struct input_dev input;
+ struct input_dev *input;
char phys[32];
struct spi_device *spi;
u16 vref_delay_usecs;
u16 x_plate_ohms;
+ u8 read_x, read_y, read_z1, read_z2;
struct ts_event tc;
struct spi_transfer xfer[8];
#define READ_12BIT_DFR(x) (ADS_START | ADS_A2A1A0_d_ ## x \
| ADS_12_BIT | ADS_DFR)
-static const u8 read_y = READ_12BIT_DFR(y) | ADS_PD10_ADC_ON;
-static const u8 read_z1 = READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON;
-static const u8 read_z2 = READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON;
-static const u8 read_x = READ_12BIT_DFR(x) | ADS_PD10_PDOWN; /* LAST */
+#define READ_Y (READ_12BIT_DFR(y) | ADS_PD10_ADC_ON)
+#define READ_Z1 (READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
+#define READ_Z2 (READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
+#define READ_X (READ_12BIT_DFR(x) | ADS_PD10_PDOWN) /* LAST */
/* single-ended samples need to first power up reference voltage;
* we leave both ADC and VREF powered
#define READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
| ADS_12_BIT | ADS_SER)
-static const u8 ref_on = READ_12BIT_DFR(x) | ADS_PD10_ALL_ON;
-static const u8 ref_off = READ_12BIT_DFR(y) | ADS_PD10_PDOWN;
+#define REF_ON (READ_12BIT_DFR(x) | ADS_PD10_ALL_ON)
+#define REF_OFF (READ_12BIT_DFR(y) | ADS_PD10_PDOWN)
/*--------------------------------------------------------------------------*/
*/
struct ser_req {
+ u8 ref_on;
u8 command;
+ u8 ref_off;
u16 scratch;
__be16 sample;
struct spi_message msg;
struct ser_req *req = kzalloc(sizeof *req, SLAB_KERNEL);
int status;
int sample;
- int i;
+ int i;
if (!req)
return -ENOMEM;
INIT_LIST_HEAD(&req->msg.transfers);
/* activate reference, so it has time to settle; */
- req->xfer[0].tx_buf = &ref_on;
+ req->ref_on = REF_ON;
+ req->xfer[0].tx_buf = &req->ref_on;
req->xfer[0].len = 1;
req->xfer[1].rx_buf = &req->scratch;
req->xfer[1].len = 2;
/* REVISIT: take a few more samples, and compare ... */
/* turn off reference */
- req->xfer[4].tx_buf = &ref_off;
+ req->ref_off = REF_OFF;
+ req->xfer[4].tx_buf = &req->ref_off;
req->xfer[4].len = 1;
req->xfer[5].rx_buf = &req->scratch;
req->xfer[5].len = 2;
static void ads7846_rx(void *ads)
{
- struct ads7846 *ts = ads;
- unsigned Rt;
- unsigned sync = 0;
- u16 x, y, z1, z2;
- unsigned long flags;
+ struct ads7846 *ts = ads;
+ struct input_dev *input_dev = ts->input;
+ unsigned Rt;
+ unsigned sync = 0;
+ u16 x, y, z1, z2;
+ unsigned long flags;
/* adjust: 12 bit samples (left aligned), built from
* two 8 bit values writen msb-first.
* won't notice that, even if nPENIRQ never fires ...
*/
if (!ts->pendown && Rt != 0) {
- input_report_key(&ts->input, BTN_TOUCH, 1);
+ input_report_key(input_dev, BTN_TOUCH, 1);
sync = 1;
} else if (ts->pendown && Rt == 0) {
- input_report_key(&ts->input, BTN_TOUCH, 0);
+ input_report_key(input_dev, BTN_TOUCH, 0);
sync = 1;
}
if (Rt) {
- input_report_abs(&ts->input, ABS_X, x);
- input_report_abs(&ts->input, ABS_Y, y);
- input_report_abs(&ts->input, ABS_PRESSURE, Rt);
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_report_abs(input_dev, ABS_PRESSURE, Rt);
sync = 1;
}
if (sync)
- input_sync(&ts->input);
+ input_sync(input_dev);
#ifdef VERBOSE
if (Rt || ts->pendown)
static int __devinit ads7846_probe(struct spi_device *spi)
{
struct ads7846 *ts;
+ struct input_dev *input_dev;
struct ads7846_platform_data *pdata = spi->dev.platform_data;
struct spi_transfer *x;
- int i;
+ int err;
if (!spi->irq) {
dev_dbg(&spi->dev, "no IRQ?\n");
}
/* don't exceed max specified sample rate */
- if (spi->max_speed_hz > (125000 * 16)) {
+ if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
dev_dbg(&spi->dev, "f(sample) %d KHz?\n",
- (spi->max_speed_hz/16)/1000);
+ (spi->max_speed_hz/SAMPLE_BITS)/1000);
return -EINVAL;
}
* to discard the four garbage LSBs.
*/
- if (!(ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL)))
- return -ENOMEM;
+ ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ts || !input_dev) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
dev_set_drvdata(&spi->dev, ts);
+ spi->dev.power.power_state = PMSG_ON;
ts->spi = spi;
- spi->dev.power.power_state = PMSG_ON;
+ ts->input = input_dev;
init_timer(&ts->timer);
ts->timer.data = (unsigned long) ts;
ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
- init_input_dev(&ts->input);
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
- ts->input.dev = &spi->dev;
- ts->input.name = "ADS784x Touchscreen";
- snprintf(ts->phys, sizeof ts->phys, "%s/input0", spi->dev.bus_id);
- ts->input.phys = ts->phys;
+ input_dev->name = "ADS784x Touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->cdev.dev = &spi->dev;
- ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(&ts->input, ABS_X,
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X,
pdata->x_min ? : 0,
pdata->x_max ? : MAX_12BIT,
0, 0);
- input_set_abs_params(&ts->input, ABS_Y,
+ input_set_abs_params(input_dev, ABS_Y,
pdata->y_min ? : 0,
pdata->y_max ? : MAX_12BIT,
0, 0);
- input_set_abs_params(&ts->input, ABS_PRESSURE,
+ input_set_abs_params(input_dev, ABS_PRESSURE,
pdata->pressure_min, pdata->pressure_max, 0, 0);
- input_register_device(&ts->input);
-
/* set up the transfers to read touchscreen state; this assumes we
* use formula #2 for pressure, not #3.
*/
+ INIT_LIST_HEAD(&ts->msg.transfers);
x = ts->xfer;
/* y- still on; turn on only y+ (and ADC) */
- x->tx_buf = &read_y;
+ ts->read_y = READ_Y;
+ x->tx_buf = &ts->read_y;
x->len = 1;
+ spi_message_add_tail(x, &ts->msg);
+
x++;
x->rx_buf = &ts->tc.y;
x->len = 2;
- x++;
+ spi_message_add_tail(x, &ts->msg);
/* turn y+ off, x- on; we'll use formula #2 */
if (ts->model == 7846) {
- x->tx_buf = &read_z1;
+ x++;
+ ts->read_z1 = READ_Z1;
+ x->tx_buf = &ts->read_z1;
x->len = 1;
+ spi_message_add_tail(x, &ts->msg);
+
x++;
x->rx_buf = &ts->tc.z1;
x->len = 2;
- x++;
+ spi_message_add_tail(x, &ts->msg);
- x->tx_buf = &read_z2;
+ x++;
+ ts->read_z2 = READ_Z2;
+ x->tx_buf = &ts->read_z2;
x->len = 1;
+ spi_message_add_tail(x, &ts->msg);
+
x++;
x->rx_buf = &ts->tc.z2;
x->len = 2;
- x++;
+ spi_message_add_tail(x, &ts->msg);
}
/* turn y- off, x+ on, then leave in lowpower */
- x->tx_buf = &read_x;
+ x++;
+ ts->read_x = READ_X;
+ x->tx_buf = &ts->read_x;
x->len = 1;
+ spi_message_add_tail(x, &ts->msg);
+
x++;
x->rx_buf = &ts->tc.x;
x->len = 2;
- x++;
-
- CS_CHANGE(x[-1]);
+ CS_CHANGE(*x);
+ spi_message_add_tail(x, &ts->msg);
- for (i = 0; i < x - ts->xfer; i++)
- spi_message_add_tail(&ts->xfer[i], &ts->msg);
ts->msg.complete = ads7846_rx;
ts->msg.context = ts;
SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
spi->dev.bus_id, ts)) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
- input_unregister_device(&ts->input);
- kfree(ts);
- return -EBUSY;
+ err = -EBUSY;
+ goto err_free_mem;
}
dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
device_create_file(&spi->dev, &dev_attr_vbatt);
device_create_file(&spi->dev, &dev_attr_vaux);
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_free_irq;
+
return 0;
+
+ err_free_irq:
+ free_irq(spi->irq, ts);
+ err_free_mem:
+ input_free_device(input_dev);
+ kfree(ts);
+ return err;
}
static int __devexit ads7846_remove(struct spi_device *spi)
device_remove_file(&spi->dev, &dev_attr_vbatt);
device_remove_file(&spi->dev, &dev_attr_vaux);
- input_unregister_device(&ts->input);
+ input_unregister_device(ts->input);
kfree(ts);
dev_dbg(&spi->dev, "unregistered touchscreen\n");
/* use queue instead of direct, if online and */
/* data is in queue or buffer is full */
- if ((info->online && tty_buffer_request_room(tty, l) < l) ||
- (!skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
+ if (info->online && ((tty_buffer_request_room(tty, l) < l) ||
+ !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) {
skb = alloc_skb(l, GFP_ATOMIC);
if (!skb) {
spin_unlock_irqrestore(&info->readlock, flags);
} else if (func == MPI_FUNCTION_EVENT_ACK) {
dprintk((MYIOC_s_INFO_FMT "mpt_base_reply, EventAck reply received\n",
ioc->name));
- } else if (func == MPI_FUNCTION_CONFIG ||
- func == MPI_FUNCTION_TOOLBOX) {
+ } else if (func == MPI_FUNCTION_CONFIG) {
CONFIGPARMS *pCfg;
unsigned long flags;
return rc;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mpt_toolbox - Generic function to issue toolbox message
- * @ioc - Pointer to an adapter structure
- * @cfg - Pointer to a toolbox structure. Struct contains
- * action, page address, direction, physical address
- * and pointer to a configuration page header
- * Page header is updated.
- *
- * Returns 0 for success
- * -EPERM if not allowed due to ISR context
- * -EAGAIN if no msg frames currently available
- * -EFAULT for non-successful reply or no reply (timeout)
- */
-int
-mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
-{
- ToolboxIstwiReadWriteRequest_t *pReq;
- MPT_FRAME_HDR *mf;
- struct pci_dev *pdev;
- unsigned long flags;
- int rc;
- u32 flagsLength;
- int in_isr;
-
- /* Prevent calling wait_event() (below), if caller happens
- * to be in ISR context, because that is fatal!
- */
- in_isr = in_interrupt();
- if (in_isr) {
- dcprintk((MYIOC_s_WARN_FMT "toobox request not allowed in ISR context!\n",
- ioc->name));
- return -EPERM;
- }
-
- /* Get and Populate a free Frame
- */
- if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- dcprintk((MYIOC_s_WARN_FMT "mpt_toolbox: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
- }
- pReq = (ToolboxIstwiReadWriteRequest_t *)mf;
- pReq->Tool = pCfg->action;
- pReq->Reserved = 0;
- pReq->ChainOffset = 0;
- pReq->Function = MPI_FUNCTION_TOOLBOX;
- pReq->Reserved1 = 0;
- pReq->Reserved2 = 0;
- pReq->MsgFlags = 0;
- pReq->Flags = pCfg->dir;
- pReq->BusNum = 0;
- pReq->Reserved3 = 0;
- pReq->NumAddressBytes = 0x01;
- pReq->Reserved4 = 0;
- pReq->DataLength = cpu_to_le16(0x04);
- pdev = ioc->pcidev;
- if (pdev->devfn & 1)
- pReq->DeviceAddr = 0xB2;
- else
- pReq->DeviceAddr = 0xB0;
- pReq->Addr1 = 0;
- pReq->Addr2 = 0;
- pReq->Addr3 = 0;
- pReq->Reserved5 = 0;
-
- /* Add a SGE to the config request.
- */
-
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | 4;
-
- mpt_add_sge((char *)&pReq->SGL, flagsLength, pCfg->physAddr);
-
- dcprintk((MYIOC_s_INFO_FMT "Sending Toolbox request, Tool=%x\n",
- ioc->name, pReq->Tool));
-
- /* Append pCfg pointer to end of mf
- */
- *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
-
- /* Initalize the timer
- */
- init_timer(&pCfg->timer);
- pCfg->timer.data = (unsigned long) ioc;
- pCfg->timer.function = mpt_timer_expired;
- pCfg->wait_done = 0;
-
- /* Set the timer; ensure 10 second minimum */
- if (pCfg->timeout < 10)
- pCfg->timer.expires = jiffies + HZ*10;
- else
- pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
-
- /* Add to end of Q, set timer and then issue this command */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- list_add_tail(&pCfg->linkage, &ioc->configQ);
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- add_timer(&pCfg->timer);
- mpt_put_msg_frame(mpt_base_index, ioc, mf);
- wait_event(mpt_waitq, pCfg->wait_done);
-
- /* mf has been freed - do not access */
-
- rc = pCfg->status;
-
- return rc;
-}
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mpt_timer_expired - Call back for timer process.
if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
int idx;
- idx = ioc->eventContext % ioc->eventLogSize;
+ idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
ioc->events[idx].event = event;
ioc->events[idx].eventContext = ioc->eventContext;
EXPORT_SYMBOL(mpt_stm_index);
EXPORT_SYMBOL(mpt_HardResetHandler);
EXPORT_SYMBOL(mpt_config);
-EXPORT_SYMBOL(mpt_toolbox);
EXPORT_SYMBOL(mpt_findImVolumes);
EXPORT_SYMBOL(mpt_read_ioc_pg_3);
EXPORT_SYMBOL(mpt_alloc_fw_memory);
* increments by 32 bytes
*/
int errata_flag_1064;
+ int aen_event_read_flag; /* flag to indicate event log was read*/
u8 FirstWhoInit;
u8 upload_fw; /* If set, do a fw upload */
u8 reload_fw; /* Force a FW Reload on next reset */
extern void mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buf, int *size, int len, int showlan);
extern int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
extern int mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
-extern int mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
extern void mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
extern void mpt_free_fw_memory(MPT_ADAPTER *ioc);
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
*/
static int mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase);
+/*
+ * Event Handler function
+ */
+static int mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
+struct fasync_struct *async_queue=NULL;
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* Scatter gather list (SGL) sizes and limits...
}
/* Now wait for the command to complete */
- ii = wait_event_interruptible_timeout(mptctl_wait,
+ ii = wait_event_timeout(mptctl_wait,
ioctl->wait_done == 1,
HZ*5 /* 5 second timeout */);
if(ii <=0 && (ioctl->wait_done != 1 )) {
+ mpt_free_msg_frame(hd->ioc, mf);
ioctl->wait_done = 0;
retval = -1; /* return failure */
}
mptctl_bus_reset_done:
- mpt_free_msg_frame(hd->ioc, mf);
mptctl_free_tm_flags(ioctl->ioc);
return retval;
}
return 1;
}
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* ASYNC Event Notification Support */
+static int
+mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
+{
+ u8 event;
+
+ event = le32_to_cpu(pEvReply->Event) & 0xFF;
+
+ dctlprintk(("%s() called\n", __FUNCTION__));
+ if(async_queue == NULL)
+ return 1;
+
+ /* Raise SIGIO for persistent events.
+ * TODO - this define is not in MPI spec yet,
+ * but they plan to set it to 0x21
+ */
+ if (event == 0x21 ) {
+ ioc->aen_event_read_flag=1;
+ dctlprintk(("Raised SIGIO to application\n"));
+ devtprintk(("Raised SIGIO to application\n"));
+ kill_fasync(&async_queue, SIGIO, POLL_IN);
+ return 1;
+ }
+
+ /* This flag is set after SIGIO was raised, and
+ * remains set until the application has read
+ * the event log via ioctl=MPTEVENTREPORT
+ */
+ if(ioc->aen_event_read_flag)
+ return 1;
+
+ /* Signal only for the events that are
+ * requested for by the application
+ */
+ if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
+ ioc->aen_event_read_flag=1;
+ dctlprintk(("Raised SIGIO to application\n"));
+ devtprintk(("Raised SIGIO to application\n"));
+ kill_fasync(&async_queue, SIGIO, POLL_IN);
+ }
+ return 1;
+}
+
+static int
+mptctl_fasync(int fd, struct file *filep, int mode)
+{
+ MPT_ADAPTER *ioc;
+
+ list_for_each_entry(ioc, &ioc_list, list)
+ ioc->aen_event_read_flag=0;
+
+ dctlprintk(("%s() called\n", __FUNCTION__));
+ return fasync_helper(fd, filep, mode, &async_queue);
+}
+
+static int
+mptctl_release(struct inode *inode, struct file *filep)
+{
+ dctlprintk(("%s() called\n", __FUNCTION__));
+ return fasync_helper(-1, filep, 0, &async_queue);
+}
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* MPT ioctl handler
u16 iocstat;
pFWDownloadReply_t ReplyMsg = NULL;
- dctlprintk((KERN_INFO "mptctl_do_fwdl called. mptctl_id = %xh.\n", mptctl_id));
+ dctlprintk(("mptctl_do_fwdl called. mptctl_id = %xh.\n", mptctl_id));
- dctlprintk((KERN_INFO "DbG: kfwdl.bufp = %p\n", ufwbuf));
- dctlprintk((KERN_INFO "DbG: kfwdl.fwlen = %d\n", (int)fwlen));
- dctlprintk((KERN_INFO "DbG: kfwdl.ioc = %04xh\n", ioc));
+ dctlprintk(("DbG: kfwdl.bufp = %p\n", ufwbuf));
+ dctlprintk(("DbG: kfwdl.fwlen = %d\n", (int)fwlen));
+ dctlprintk(("DbG: kfwdl.ioc = %04xh\n", ioc));
- if ((ioc = mpt_verify_adapter(ioc, &iocp)) < 0) {
- dctlprintk(("%s@%d::_ioctl_fwdl - ioc%d not found!\n",
- __FILE__, __LINE__, ioc));
+ if (mpt_verify_adapter(ioc, &iocp) < 0) {
+ dctlprintk(("ioctl_fwdl - ioc%d not found!\n",
+ ioc));
return -ENODEV; /* (-6) No such device or address */
- }
+ } else {
- /* Valid device. Get a message frame and construct the FW download message.
- */
- if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL)
- return -EAGAIN;
+ /* Valid device. Get a message frame and construct the FW download message.
+ */
+ if ((mf = mpt_get_msg_frame(mptctl_id, iocp)) == NULL)
+ return -EAGAIN;
+ }
dlmsg = (FWDownload_t*) mf;
ptsge = (FWDownloadTCSGE_t *) &dlmsg->SGL;
sgOut = (char *) (ptsge + 1);
dlmsg->ChainOffset = 0;
dlmsg->Function = MPI_FUNCTION_FW_DOWNLOAD;
dlmsg->Reserved1[0] = dlmsg->Reserved1[1] = dlmsg->Reserved1[2] = 0;
- dlmsg->MsgFlags = 0;
+ if (iocp->facts.MsgVersion >= MPI_VERSION_01_05)
+ dlmsg->MsgFlags = MPI_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT;
+ else
+ dlmsg->MsgFlags = 0;
+
/* Set up the Transaction SGE.
*/
goto fwdl_out;
}
- dctlprintk((KERN_INFO "DbG: sgl buffer = %p, sgfrags = %d\n", sgl, numfrags));
+ dctlprintk(("DbG: sgl buffer = %p, sgfrags = %d\n", sgl, numfrags));
/*
* Parse SG list, copying sgl itself,
/*
* Finally, perform firmware download.
*/
- iocp->ioctl->wait_done = 0;
+ ReplyMsg = NULL;
mpt_put_msg_frame(mptctl_id, iocp, mf);
/* Now wait for the command to complete */
- ret = wait_event_interruptible_timeout(mptctl_wait,
+ ret = wait_event_timeout(mptctl_wait,
iocp->ioctl->wait_done == 1,
HZ*60);
/* Fill in the data and return the structure to the calling
* program
*/
- if (ioc->bus_type == FC)
+ if (ioc->bus_type == SAS)
+ karg->adapterType = MPT_IOCTL_INTERFACE_SAS;
+ else if (ioc->bus_type == FC)
karg->adapterType = MPT_IOCTL_INTERFACE_FC;
else
karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
} else if (cim_rev == 2) {
- /* Get the PCI bus, device, function and segment ID numbers
+ /* Get the PCI bus, device, function and segment ID numbers
for the IOC */
karg->pciInfo.u.bits.busNumber = pdev->bus->number;
karg->pciInfo.u.bits.deviceNumber = PCI_SLOT( pdev->devfn );
karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
- karg->pciInfo.u.bits.functionNumber = PCI_FUNC( pdev->devfn );
karg->pciInfo.segmentID = pci_domain_nr(pdev->bus);
}
return -ENODEV;
}
- karg.eventEntries = ioc->eventLogSize;
+ karg.eventEntries = MPTCTL_EVENT_LOG_SIZE;
karg.eventTypes = ioc->eventTypes;
/* Copy the data from kernel memory to user memory
memset(ioc->events, 0, sz);
ioc->alloc_total += sz;
- ioc->eventLogSize = MPTCTL_EVENT_LOG_SIZE;
ioc->eventContext = 0;
}
maxEvents = numBytes/sizeof(MPT_IOCTL_EVENTS);
- max = ioc->eventLogSize < maxEvents ? ioc->eventLogSize : maxEvents;
+ max = MPTCTL_EVENT_LOG_SIZE < maxEvents ? MPTCTL_EVENT_LOG_SIZE : maxEvents;
/* If fewer than 1 event is requested, there must have
* been some type of error.
if ((max < 1) || !ioc->events)
return -ENODATA;
+ /* reset this flag so SIGIO can restart */
+ ioc->aen_event_read_flag=0;
+
/* Copy the data from kernel memory to user memory
*/
numBytes = max * sizeof(MPT_IOCTL_EVENTS);
case MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
case MPI_FUNCTION_FW_DOWNLOAD:
case MPI_FUNCTION_FC_PRIMITIVE_SEND:
+ case MPI_FUNCTION_TOOLBOX:
+ case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
break;
case MPI_FUNCTION_SCSI_IO_REQUEST:
goto done_free_mem;
}
- pScsiReq->MsgFlags = mpt_msg_flags();
+ pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
+ pScsiReq->MsgFlags |= mpt_msg_flags();
+
/* verify that app has not requested
* more sense data than driver
}
break;
+ case MPI_FUNCTION_SMP_PASSTHROUGH:
+ /* Check mf->PassthruFlags to determine if
+ * transfer is ImmediateMode or not.
+ * Immediate mode returns data in the ReplyFrame.
+ * Else, we are sending request and response data
+ * in two SGLs at the end of the mf.
+ */
+ break;
+
+ case MPI_FUNCTION_SATA_PASSTHROUGH:
+ if (!ioc->sh) {
+ printk(KERN_ERR "%s@%d::mptctl_do_mpt_command - "
+ "SCSI driver is not loaded. \n",
+ __FILE__, __LINE__);
+ rc = -EFAULT;
+ goto done_free_mem;
+ }
+ break;
+
case MPI_FUNCTION_RAID_ACTION:
/* Just add a SGE
*/
int scsidir = MPI_SCSIIO_CONTROL_READ;
int dataSize;
- pScsiReq->MsgFlags = mpt_msg_flags();
+ pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
+ pScsiReq->MsgFlags |= mpt_msg_flags();
+
/* verify that app has not requested
* more sense data than driver
/* Now wait for the command to complete */
timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
- timeout = wait_event_interruptible_timeout(mptctl_wait,
+ timeout = wait_event_timeout(mptctl_wait,
ioc->ioctl->wait_done == 1,
HZ*timeout);
hp_host_info_t __user *uarg = (void __user *) arg;
MPT_ADAPTER *ioc;
struct pci_dev *pdev;
- char *pbuf;
+ char *pbuf=NULL;
dma_addr_t buf_dma;
hp_host_info_t karg;
CONFIGPARMS cfg;
ConfigPageHeader_t hdr;
int iocnum;
int rc, cim_rev;
+ ToolboxIstwiReadWriteRequest_t *IstwiRWRequest;
+ MPT_FRAME_HDR *mf = NULL;
+ MPIHeader_t *mpi_hdr;
dctlprintk((": mptctl_hp_hostinfo called.\n"));
/* Reset long to int. Should affect IA64 and SPARC only
karg.base_io_addr = pci_resource_start(pdev, 0);
- if (ioc->bus_type == FC)
+ if ((ioc->bus_type == SAS) || (ioc->bus_type == FC))
karg.bus_phys_width = HP_BUS_WIDTH_UNK;
else
karg.bus_phys_width = HP_BUS_WIDTH_16;
}
}
- cfg.pageAddr = 0;
- cfg.action = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
- cfg.dir = MPI_TB_ISTWI_FLAGS_READ;
- cfg.timeout = 10;
+ /*
+ * Gather ISTWI(Industry Standard Two Wire Interface) Data
+ */
+ if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
+ dfailprintk((MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
+ ioc->name,__FUNCTION__));
+ goto out;
+ }
+
+ IstwiRWRequest = (ToolboxIstwiReadWriteRequest_t *)mf;
+ mpi_hdr = (MPIHeader_t *) mf;
+ memset(IstwiRWRequest,0,sizeof(ToolboxIstwiReadWriteRequest_t));
+ IstwiRWRequest->Function = MPI_FUNCTION_TOOLBOX;
+ IstwiRWRequest->Tool = MPI_TOOLBOX_ISTWI_READ_WRITE_TOOL;
+ IstwiRWRequest->MsgContext = mpi_hdr->MsgContext;
+ IstwiRWRequest->Flags = MPI_TB_ISTWI_FLAGS_READ;
+ IstwiRWRequest->NumAddressBytes = 0x01;
+ IstwiRWRequest->DataLength = cpu_to_le16(0x04);
+ if (pdev->devfn & 1)
+ IstwiRWRequest->DeviceAddr = 0xB2;
+ else
+ IstwiRWRequest->DeviceAddr = 0xB0;
+
pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
- if (pbuf) {
- cfg.physAddr = buf_dma;
- if ((mpt_toolbox(ioc, &cfg)) == 0) {
- karg.rsvd = *(u32 *)pbuf;
- }
- pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
- pbuf = NULL;
+ if (!pbuf)
+ goto out;
+ mpt_add_sge((char *)&IstwiRWRequest->SGL,
+ (MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
+
+ ioc->ioctl->wait_done = 0;
+ mpt_put_msg_frame(mptctl_id, ioc, mf);
+
+ rc = wait_event_timeout(mptctl_wait,
+ ioc->ioctl->wait_done == 1,
+ HZ*MPT_IOCTL_DEFAULT_TIMEOUT /* 10 sec */);
+
+ if(rc <=0 && (ioc->ioctl->wait_done != 1 )) {
+ /*
+ * Now we need to reset the board
+ */
+ mpt_free_msg_frame(ioc, mf);
+ mptctl_timeout_expired(ioc->ioctl);
+ goto out;
}
+ /*
+ *ISTWI Data Definition
+ * pbuf[0] = FW_VERSION = 0x4
+ * pbuf[1] = Bay Count = 6 or 4 or 2, depending on
+ * the config, you should be seeing one out of these three values
+ * pbuf[2] = Drive Installed Map = bit pattern depend on which
+ * bays have drives in them
+ * pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
+ */
+ if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID)
+ karg.rsvd = *(u32 *)pbuf;
+
+ out:
+ if (pbuf)
+ pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
+
/* Copy the data from kernel memory to user memory
*/
if (copy_to_user((char __user *)arg, &karg, sizeof(hp_host_info_t))) {
/* There is nothing to do for FCP parts.
*/
- if (ioc->bus_type == FC)
+ if ((ioc->bus_type == SAS) || (ioc->bus_type == FC))
return 0;
if ((ioc->spi_data.sdp0length == 0) || (ioc->sh == NULL))
static struct file_operations mptctl_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
+ .release = mptctl_release,
+ .fasync = mptctl_fasync,
.unlocked_ioctl = mptctl_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_mpctl_ioctl,
/* FIXME! */
}
+ if (mpt_event_register(mptctl_id, mptctl_event_process) == 0) {
+ devtprintk((KERN_INFO MYNAM
+ ": Registered for IOC event notifications\n"));
+ }
+
return 0;
out_fail:
* Read only.
* Data starts at offset 0xC
*/
-#define MPT_IOCTL_INTERFACE_FC (0x01)
#define MPT_IOCTL_INTERFACE_SCSI (0x00)
+#define MPT_IOCTL_INTERFACE_FC (0x01)
+#define MPT_IOCTL_INTERFACE_FC_IP (0x02)
+#define MPT_IOCTL_INTERFACE_SAS (0x03)
#define MPT_IOCTL_VERSION_LENGTH (32)
struct mpt_ioctl_iocinfo {
int idx;
MPT_ADAPTER *ioc = hd->ioc;
- idx = ioc->eventContext % ioc->eventLogSize;
+ idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
ioc->events[idx].eventContext = ioc->eventContext;
struct ltfirmware
{
unsigned int length;
- const unsigned char * data;
+ const unsigned char *data;
};
#define DAYNA 1
In order to use this driver, you will need a firmware image for it.
You can obtain the firmware from
<http://ipw2100.sf.net/>. Once you have the firmware image, you
- will need to place it in /etc/firmware.
+ will need to place it in /lib/firmware.
You will also very likely need the Wireless Tools in order to
configure your card:
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+ PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/reboot.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <asm/byteorder.h>
#include <asm/cache.h> /* for L1_CACHE_BYTES */
};
#ifdef CONFIG_PROC_FS
-static int proc_append(char *src, int len, char **dst, off_t *offset, int *max)
-{
- if (len < *offset) {
- *offset -= len;
- return 0;
- }
- if (*offset > 0) {
- src += *offset;
- len -= *offset;
- *offset = 0;
- }
- if (len > *max) {
- len = *max;
- }
- memcpy(*dst, src, len);
- *dst += len;
- *max -= len;
- return (*max == 0);
-}
-
-static int ccio_proc_info(char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
+static int ccio_proc_info(struct seq_file *m, void *p)
{
- int max = count;
- char tmp[80]; /* width of an ANSI-standard terminal */
+ int len = 0;
struct ioc *ioc = ioc_list;
while (ioc != NULL) {
unsigned int total_pages = ioc->res_size << 3;
unsigned long avg = 0, min, max;
- int j, len;
+ int j;
- len = sprintf(tmp, "%s\n", ioc->name);
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+ len += seq_printf(m, "%s\n", ioc->name);
- len = sprintf(tmp, "Cujo 2.0 bug : %s\n",
- (ioc->cujo20_bug ? "yes" : "no"));
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+ len += seq_printf(m, "Cujo 2.0 bug : %s\n",
+ (ioc->cujo20_bug ? "yes" : "no"));
- len = sprintf(tmp, "IO PDIR size : %d bytes (%d entries)\n",
- total_pages * 8, total_pages);
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+ len += seq_printf(m, "IO PDIR size : %d bytes (%d entries)\n",
+ total_pages * 8, total_pages);
+
#ifdef CCIO_MAP_STATS
- len = sprintf(tmp, "IO PDIR entries : %ld free %ld used (%d%%)\n",
- total_pages - ioc->used_pages, ioc->used_pages,
- (int)(ioc->used_pages * 100 / total_pages));
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+ len += seq_printf(m, "IO PDIR entries : %ld free %ld used (%d%%)\n",
+ total_pages - ioc->used_pages, ioc->used_pages,
+ (int)(ioc->used_pages * 100 / total_pages));
#endif
- len = sprintf(tmp, "Resource bitmap : %d bytes (%d pages)\n",
- ioc->res_size, total_pages);
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+
+ len += seq_printf(m, "Resource bitmap : %d bytes (%d pages)\n",
+ ioc->res_size, total_pages);
+
#ifdef CCIO_SEARCH_TIME
min = max = ioc->avg_search[0];
for(j = 0; j < CCIO_SEARCH_SAMPLE; ++j) {
min = ioc->avg_search[j];
}
avg /= CCIO_SEARCH_SAMPLE;
- len = sprintf(tmp, " Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
- min, avg, max);
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+ len += seq_printf(m, " Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
+ min, avg, max);
#endif
#ifdef CCIO_MAP_STATS
- len = sprintf(tmp, "pci_map_single(): %8ld calls %8ld pages (avg %d/1000)\n",
- ioc->msingle_calls, ioc->msingle_pages,
- (int)((ioc->msingle_pages * 1000)/ioc->msingle_calls));
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
-
+ len += seq_printf(m, "pci_map_single(): %8ld calls %8ld pages (avg %d/1000)\n",
+ ioc->msingle_calls, ioc->msingle_pages,
+ (int)((ioc->msingle_pages * 1000)/ioc->msingle_calls));
/* KLUGE - unmap_sg calls unmap_single for each mapped page */
min = ioc->usingle_calls - ioc->usg_calls;
max = ioc->usingle_pages - ioc->usg_pages;
- len = sprintf(tmp, "pci_unmap_single: %8ld calls %8ld pages (avg %d/1000)\n",
- min, max, (int)((max * 1000)/min));
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+ len += seq_printf(m, "pci_unmap_single: %8ld calls %8ld pages (avg %d/1000)\n",
+ min, max, (int)((max * 1000)/min));
- len = sprintf(tmp, "pci_map_sg() : %8ld calls %8ld pages (avg %d/1000)\n",
- ioc->msg_calls, ioc->msg_pages,
- (int)((ioc->msg_pages * 1000)/ioc->msg_calls));
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
- len = sprintf(tmp, "pci_unmap_sg() : %8ld calls %8ld pages (avg %d/1000)\n\n\n",
- ioc->usg_calls, ioc->usg_pages,
- (int)((ioc->usg_pages * 1000)/ioc->usg_calls));
- if (proc_append(tmp, len, &buf, &offset, &count))
- break;
+ len += seq_printf(m, "pci_map_sg() : %8ld calls %8ld pages (avg %d/1000)\n",
+ ioc->msg_calls, ioc->msg_pages,
+ (int)((ioc->msg_pages * 1000)/ioc->msg_calls));
+
+ len += seq_printf(m, "pci_unmap_sg() : %8ld calls %8ld pages (avg %d/1000)\n\n\n",
+ ioc->usg_calls, ioc->usg_pages,
+ (int)((ioc->usg_pages * 1000)/ioc->usg_calls));
#endif /* CCIO_MAP_STATS */
+
ioc = ioc->next;
}
- if (count == 0) {
- *eof = 1;
- }
- return (max - count);
+ return 0;
+}
+
+static int ccio_proc_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, &ccio_proc_info, NULL);
}
-static int ccio_resource_map(char *buf, char **start, off_t offset, int len,
- int *eof, void *data)
+static struct file_operations ccio_proc_info_fops = {
+ .owner = THIS_MODULE,
+ .open = ccio_proc_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int ccio_proc_bitmap_info(struct seq_file *m, void *p)
{
+ int len = 0;
struct ioc *ioc = ioc_list;
- buf[0] = '\0';
while (ioc != NULL) {
u32 *res_ptr = (u32 *)ioc->res_map;
int j;
for (j = 0; j < (ioc->res_size / sizeof(u32)); j++) {
if ((j & 7) == 0)
- strcat(buf,"\n ");
- sprintf(buf, "%s %08x", buf, *res_ptr);
+ len += seq_puts(m, "\n ");
+ len += seq_printf(m, "%08x", *res_ptr);
res_ptr++;
}
- strcat(buf, "\n\n");
+ len += seq_puts(m, "\n\n");
ioc = ioc->next;
break; /* XXX - remove me */
}
- return strlen(buf);
+ return 0;
}
+
+static int ccio_proc_bitmap_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, &ccio_proc_bitmap_info, NULL);
+}
+
+static struct file_operations ccio_proc_bitmap_fops = {
+ .owner = THIS_MODULE,
+ .open = ccio_proc_bitmap_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif
/**
{
int i;
struct ioc *ioc, **ioc_p = &ioc_list;
+ struct proc_dir_entry *info_entry, *bitmap_entry;
ioc = kzalloc(sizeof(struct ioc), GFP_KERNEL);
if (ioc == NULL) {
BUG_ON(dev->dev.platform_data == NULL);
HBA_DATA(dev->dev.platform_data)->iommu = ioc;
-
if (ioc_count == 0) {
- /* FIXME: Create separate entries for each ioc */
- create_proc_read_entry(MODULE_NAME, S_IRWXU, proc_runway_root,
- ccio_proc_info, NULL);
- create_proc_read_entry(MODULE_NAME"-bitmap", S_IRWXU,
- proc_runway_root, ccio_resource_map, NULL);
+ info_entry = create_proc_entry(MODULE_NAME, 0, proc_runway_root);
+ if (info_entry)
+ info_entry->proc_fops = &ccio_proc_info_fops;
+
+ bitmap_entry = create_proc_entry(MODULE_NAME"-bitmap", 0, proc_runway_root);
+ if (bitmap_entry)
+ bitmap_entry->proc_fops = &ccio_proc_bitmap_fops;
}
ioc_count++;
#include <asm/hardware.h> /* for register_parisc_driver() stuff */
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
#include <asm/runway.h> /* for proc_runway_root */
#include <asm/pdc.h> /* for PDC_MODEL_* */
#include <asm/pdcpat.h> /* for is_pdc_pat() */
}
#ifdef CONFIG_PROC_FS
-static int sba_proc_info(char *buf, char **start, off_t offset, int len)
+static int sba_proc_info(struct seq_file *m, void *p)
{
struct sba_device *sba_dev = sba_list;
struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */
int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
- unsigned long i;
#ifdef SBA_COLLECT_STATS
unsigned long avg = 0, min, max;
#endif
+ int i, len = 0;
- sprintf(buf, "%s rev %d.%d\n",
+ len += seq_printf(m, "%s rev %d.%d\n",
sba_dev->name,
(sba_dev->hw_rev & 0x7) + 1,
(sba_dev->hw_rev & 0x18) >> 3
);
- sprintf(buf, "%sIO PDIR size : %d bytes (%d entries)\n",
- buf,
+ len += seq_printf(m, "IO PDIR size : %d bytes (%d entries)\n",
(int) ((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
total_pages);
- sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n",
- buf, ioc->res_size, ioc->res_size << 3); /* 8 bits per byte */
+ len += seq_printf(m, "Resource bitmap : %d bytes (%d pages)\n",
+ ioc->res_size, ioc->res_size << 3); /* 8 bits per byte */
- sprintf(buf, "%sLMMIO_BASE/MASK/ROUTE %08x %08x %08x\n",
- buf,
+ len += seq_printf(m, "LMMIO_BASE/MASK/ROUTE %08x %08x %08x\n",
READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_BASE),
READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_MASK),
READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_ROUTE)
);
for (i=0; i<4; i++)
- sprintf(buf, "%sDIR%ld_BASE/MASK/ROUTE %08x %08x %08x\n",
- buf, i,
+ len += seq_printf(m, "DIR%d_BASE/MASK/ROUTE %08x %08x %08x\n", i,
READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_BASE + i*0x18),
READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_MASK + i*0x18),
READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_ROUTE + i*0x18)
);
#ifdef SBA_COLLECT_STATS
- sprintf(buf, "%sIO PDIR entries : %ld free %ld used (%d%%)\n", buf,
+ len += seq_printf(m, "IO PDIR entries : %ld free %ld used (%d%%)\n",
total_pages - ioc->used_pages, ioc->used_pages,
(int) (ioc->used_pages * 100 / total_pages));
if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
}
avg /= SBA_SEARCH_SAMPLE;
- sprintf(buf, "%s Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
- buf, min, avg, max);
+ len += seq_printf(m, " Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
+ min, avg, max);
- sprintf(buf, "%spci_map_single(): %12ld calls %12ld pages (avg %d/1000)\n",
- buf, ioc->msingle_calls, ioc->msingle_pages,
+ len += seq_printf(m, "pci_map_single(): %12ld calls %12ld pages (avg %d/1000)\n",
+ ioc->msingle_calls, ioc->msingle_pages,
(int) ((ioc->msingle_pages * 1000)/ioc->msingle_calls));
/* KLUGE - unmap_sg calls unmap_single for each mapped page */
min = ioc->usingle_calls;
max = ioc->usingle_pages - ioc->usg_pages;
- sprintf(buf, "%spci_unmap_single: %12ld calls %12ld pages (avg %d/1000)\n",
- buf, min, max,
- (int) ((max * 1000)/min));
+ len += seq_printf(m, "pci_unmap_single: %12ld calls %12ld pages (avg %d/1000)\n",
+ min, max, (int) ((max * 1000)/min));
- sprintf(buf, "%spci_map_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
- buf, ioc->msg_calls, ioc->msg_pages,
+ len += seq_printf(m, "pci_map_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
+ ioc->msg_calls, ioc->msg_pages,
(int) ((ioc->msg_pages * 1000)/ioc->msg_calls));
- sprintf(buf, "%spci_unmap_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
- buf, ioc->usg_calls, ioc->usg_pages,
+ len += seq_printf(m, "pci_unmap_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
+ ioc->usg_calls, ioc->usg_pages,
(int) ((ioc->usg_pages * 1000)/ioc->usg_calls));
#endif
- return strlen(buf);
+ return 0;
}
-#if 0
-/* XXX too much output - exceeds 4k limit and needs to be re-written */
static int
-sba_resource_map(char *buf, char **start, off_t offset, int len)
+sba_proc_open(struct inode *i, struct file *f)
+{
+ return single_open(f, &sba_proc_info, NULL);
+}
+
+static struct file_operations sba_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = sba_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int
+sba_proc_bitmap_info(struct seq_file *m, void *p)
{
struct sba_device *sba_dev = sba_list;
- struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Mutli-IOC suppoer! */
+ struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */
unsigned int *res_ptr = (unsigned int *)ioc->res_map;
- int i;
+ int i, len = 0;
- buf[0] = '\0';
- for(i = 0; i < (ioc->res_size / sizeof(unsigned int)); ++i, ++res_ptr) {
+ for (i = 0; i < (ioc->res_size/sizeof(unsigned int)); ++i, ++res_ptr) {
if ((i & 7) == 0)
- strcat(buf,"\n ");
- sprintf(buf, "%s %08x", buf, *res_ptr);
+ len += seq_printf(m, "\n ");
+ len += seq_printf(m, " %08x", *res_ptr);
}
- strcat(buf, "\n");
+ len += seq_printf(m, "\n");
- return strlen(buf);
+ return 0;
}
-#endif /* 0 */
+
+static int
+sba_proc_bitmap_open(struct inode *i, struct file *f)
+{
+ return single_open(f, &sba_proc_bitmap_info, NULL);
+}
+
+static struct file_operations sba_proc_bitmap_fops = {
+ .owner = THIS_MODULE,
+ .open = sba_proc_bitmap_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif /* CONFIG_PROC_FS */
static struct parisc_device_id sba_tbl[] = {
int i;
char *version;
void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
+ struct proc_dir_entry *info_entry, *bitmap_entry, *root;
sba_dump_ranges(sba_addr);
hppa_dma_ops = &sba_ops;
#ifdef CONFIG_PROC_FS
- if (IS_ASTRO(&dev->id)) {
- create_proc_info_entry("Astro", 0, proc_runway_root, sba_proc_info);
- } else if (IS_IKE(&dev->id)) {
- create_proc_info_entry("Ike", 0, proc_runway_root, sba_proc_info);
- } else if (IS_PLUTO(&dev->id)) {
- create_proc_info_entry("Pluto", 0, proc_mckinley_root, sba_proc_info);
- } else {
- create_proc_info_entry("Reo", 0, proc_runway_root, sba_proc_info);
+ switch (dev->id.hversion) {
+ case PLUTO_MCKINLEY_PORT:
+ root = proc_mckinley_root;
+ break;
+ case ASTRO_RUNWAY_PORT:
+ case IKE_MERCED_PORT:
+ default:
+ root = proc_runway_root;
+ break;
}
-#if 0
- create_proc_info_entry("bitmap", 0, proc_runway_root, sba_resource_map);
-#endif
+
+ info_entry = create_proc_entry("sba_iommu", 0, root);
+ bitmap_entry = create_proc_entry("sba_iommu-bitmap", 0, root);
+
+ if (info_entry)
+ info_entry->proc_fops = &sba_proc_fops;
+
+ if (bitmap_entry)
+ bitmap_entry->proc_fops = &sba_proc_bitmap_fops;
#endif
+
parisc_vmerge_boundary = IOVP_SIZE;
parisc_vmerge_max_size = IOVP_SIZE * BITS_PER_LONG;
parisc_has_iommu();
/* Maximum retry counts */
#define SCLP_INIT_RETRY 3
#define SCLP_MASK_RETRY 3
-#define SCLP_REQUEST_RETRY 3
/* Timeout intervals in seconds.*/
-#define SCLP_BUSY_INTERVAL 2
-#define SCLP_RETRY_INTERVAL 5
+#define SCLP_BUSY_INTERVAL 10
+#define SCLP_RETRY_INTERVAL 15
static void sclp_process_queue(void);
static int sclp_init_mask(int calculate);
if (sclp_running_state != sclp_running_state_idle)
return 0;
del_timer(&sclp_request_timer);
- if (req->start_count <= SCLP_REQUEST_RETRY) {
- rc = service_call(req->command, req->sccb);
- req->start_count++;
- } else
- rc = -EIO;
+ rc = service_call(req->command, req->sccb);
+ req->start_count++;
+
if (rc == 0) {
/* Sucessfully started request */
req->status = SCLP_REQ_RUNNING;
return 0;
mask = 0x80 >> j;
- spin_lock(&sch->lock);
+ spin_lock_irq(&sch->lock);
stsch(sch->schid, &schib);
if (!schib.pmcw.dnv)
if (sch->driver && sch->driver->verify)
sch->driver->verify(&sch->dev);
out_unlock:
- spin_unlock(&sch->lock);
+ spin_unlock_irq(&sch->lock);
return 0;
out_unreg:
- spin_unlock(&sch->lock);
+ spin_unlock_irq(&sch->lock);
sch->lpm = 0;
if (css_enqueue_subchannel_slow(sch->schid)) {
css_clear_subchannel_slow_list();
if (!sch)
/* Check if the subchannel is now available. */
return __chp_add_new_sch(schid);
- spin_lock(&sch->lock);
+ spin_lock_irq(&sch->lock);
for (i=0; i<8; i++)
if (sch->schib.pmcw.chpid[i] == chp->id) {
if (stsch(sch->schid, &sch->schib) != 0) {
if (sch->driver && sch->driver->verify)
sch->driver->verify(&sch->dev);
- spin_unlock(&sch->lock);
+ spin_unlock_irq(&sch->lock);
put_device(&sch->dev);
return 0;
}
_zfcp_scsi_dbf_event_common(const char *tag, const char *tag2, int level,
struct zfcp_adapter *adapter,
struct scsi_cmnd *scsi_cmnd,
- struct zfcp_fsf_req *new_fsf_req)
+ struct zfcp_fsf_req *fsf_req,
+ struct zfcp_fsf_req *old_fsf_req)
{
- struct zfcp_fsf_req *fsf_req =
- (struct zfcp_fsf_req *)scsi_cmnd->host_scribble;
struct zfcp_scsi_dbf_record *rec = &adapter->scsi_dbf_buf;
struct zfcp_dbf_dump *dump = (struct zfcp_dbf_dump *)rec;
unsigned long flags;
if (offset == 0) {
strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
strncpy(rec->tag2, tag2, ZFCP_DBF_TAG_SIZE);
- if (scsi_cmnd->device) {
- rec->scsi_id = scsi_cmnd->device->id;
- rec->scsi_lun = scsi_cmnd->device->lun;
+ if (scsi_cmnd != NULL) {
+ if (scsi_cmnd->device) {
+ rec->scsi_id = scsi_cmnd->device->id;
+ rec->scsi_lun = scsi_cmnd->device->lun;
+ }
+ rec->scsi_result = scsi_cmnd->result;
+ rec->scsi_cmnd = (unsigned long)scsi_cmnd;
+ rec->scsi_serial = scsi_cmnd->serial_number;
+ memcpy(rec->scsi_opcode, &scsi_cmnd->cmnd,
+ min((int)scsi_cmnd->cmd_len,
+ ZFCP_DBF_SCSI_OPCODE));
+ rec->scsi_retries = scsi_cmnd->retries;
+ rec->scsi_allowed = scsi_cmnd->allowed;
}
- rec->scsi_result = scsi_cmnd->result;
- rec->scsi_cmnd = (unsigned long)scsi_cmnd;
- rec->scsi_serial = scsi_cmnd->serial_number;
- memcpy(rec->scsi_opcode,
- &scsi_cmnd->cmnd,
- min((int)scsi_cmnd->cmd_len,
- ZFCP_DBF_SCSI_OPCODE));
- rec->scsi_retries = scsi_cmnd->retries;
- rec->scsi_allowed = scsi_cmnd->allowed;
if (fsf_req != NULL) {
fcp_rsp = (struct fcp_rsp_iu *)
&(fsf_req->qtcb->bottom.io.fcp_rsp);
rec->fsf_seqno = fsf_req->seq_no;
rec->fsf_issued = fsf_req->issued;
}
- if (new_fsf_req != NULL) {
- rec->type.new_fsf_req.fsf_reqid =
- (unsigned long)
- new_fsf_req;
- rec->type.new_fsf_req.fsf_seqno =
- new_fsf_req->seq_no;
- rec->type.new_fsf_req.fsf_issued =
- new_fsf_req->issued;
- }
+ rec->type.old_fsf_reqid =
+ (unsigned long) old_fsf_req;
} else {
strncpy(dump->tag, "dump", ZFCP_DBF_TAG_SIZE);
dump->total_size = buflen;
inline void
zfcp_scsi_dbf_event_result(const char *tag, int level,
struct zfcp_adapter *adapter,
- struct scsi_cmnd *scsi_cmnd)
+ struct scsi_cmnd *scsi_cmnd,
+ struct zfcp_fsf_req *fsf_req)
{
- _zfcp_scsi_dbf_event_common("rslt",
- tag, level, adapter, scsi_cmnd, NULL);
+ _zfcp_scsi_dbf_event_common("rslt", tag, level,
+ adapter, scsi_cmnd, fsf_req, NULL);
}
inline void
zfcp_scsi_dbf_event_abort(const char *tag, struct zfcp_adapter *adapter,
struct scsi_cmnd *scsi_cmnd,
- struct zfcp_fsf_req *new_fsf_req)
+ struct zfcp_fsf_req *new_fsf_req,
+ struct zfcp_fsf_req *old_fsf_req)
{
- _zfcp_scsi_dbf_event_common("abrt",
- tag, 1, adapter, scsi_cmnd, new_fsf_req);
+ _zfcp_scsi_dbf_event_common("abrt", tag, 1,
+ adapter, scsi_cmnd, new_fsf_req, old_fsf_req);
}
inline void
struct zfcp_adapter *adapter = unit->port->adapter;
_zfcp_scsi_dbf_event_common(flag == FCP_TARGET_RESET ? "trst" : "lrst",
- tag, 1, adapter, scsi_cmnd, NULL);
+ tag, 1, adapter, scsi_cmnd, NULL, NULL);
}
static int
rec->scsi_retries);
len += zfcp_dbf_view(out_buf + len, "scsi_allowed", "0x%02x",
rec->scsi_allowed);
+ if (strncmp(rec->tag, "abrt", ZFCP_DBF_TAG_SIZE) == 0) {
+ len += zfcp_dbf_view(out_buf + len, "old_fsf_reqid", "0x%0Lx",
+ rec->type.old_fsf_reqid);
+ }
len += zfcp_dbf_view(out_buf + len, "fsf_reqid", "0x%0Lx",
rec->fsf_reqid);
len += zfcp_dbf_view(out_buf + len, "fsf_seqno", "0x%08x",
min((int)rec->type.fcp.sns_info_len,
ZFCP_DBF_SCSI_FCP_SNS_INFO), 0,
rec->type.fcp.sns_info_len);
- } else if (strncmp(rec->tag, "abrt", ZFCP_DBF_TAG_SIZE) == 0) {
- len += zfcp_dbf_view(out_buf + len, "fsf_reqid_abort", "0x%0Lx",
- rec->type.new_fsf_req.fsf_reqid);
- len += zfcp_dbf_view(out_buf + len, "fsf_seqno_abort", "0x%08x",
- rec->type.new_fsf_req.fsf_seqno);
- len += zfcp_dbf_stck(out_buf + len, "fsf_issued",
- rec->type.new_fsf_req.fsf_issued);
- } else if ((strncmp(rec->tag, "trst", ZFCP_DBF_TAG_SIZE) == 0) ||
- (strncmp(rec->tag, "lrst", ZFCP_DBF_TAG_SIZE) == 0)) {
- len += zfcp_dbf_view(out_buf + len, "fsf_reqid_reset", "0x%0Lx",
- rec->type.new_fsf_req.fsf_reqid);
- len += zfcp_dbf_view(out_buf + len, "fsf_seqno_reset", "0x%08x",
- rec->type.new_fsf_req.fsf_seqno);
- len += zfcp_dbf_stck(out_buf + len, "fsf_issued",
- rec->type.new_fsf_req.fsf_issued);
}
len += sprintf(out_buf + len, "\n");
#define ZFCP_EXCHANGE_CONFIG_DATA_FIRST_SLEEP 100
#define ZFCP_EXCHANGE_CONFIG_DATA_RETRIES 7
-/* Retry 5 times every 2 second, then every minute */
-#define ZFCP_EXCHANGE_PORT_DATA_SHORT_RETRIES 5
-#define ZFCP_EXCHANGE_PORT_DATA_SHORT_SLEEP 200
-#define ZFCP_EXCHANGE_PORT_DATA_LONG_SLEEP 6000
-
/* timeout value for "default timer" for fsf requests */
#define ZFCP_FSF_REQUEST_TIMEOUT (60*HZ);
u32 fsf_seqno;
u64 fsf_issued;
union {
- struct {
- u64 fsf_reqid;
- u32 fsf_seqno;
- u64 fsf_issued;
- } new_fsf_req;
+ u64 old_fsf_reqid;
struct {
u8 rsp_validity;
u8 rsp_scsi_status;
wwn_t peer_wwnn; /* P2P peer WWNN */
wwn_t peer_wwpn; /* P2P peer WWPN */
u32 peer_d_id; /* P2P peer D_ID */
- wwn_t physical_wwpn; /* WWPN of physical port */
- u32 physical_s_id; /* local FC port ID */
struct ccw_device *ccw_device; /* S/390 ccw device */
u8 fc_service_class;
u32 hydra_version; /* Hydra version */
{
int retval;
- if ((atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
- &erp_action->adapter->status)) &&
- (erp_action->adapter->adapter_features &
- FSF_FEATURE_HBAAPI_MANAGEMENT)) {
- zfcp_erp_adapter_strategy_open_fsf_xport(erp_action);
- atomic_set(&erp_action->adapter->erp_counter, 0);
- return ZFCP_ERP_FAILED;
- }
-
retval = zfcp_erp_adapter_strategy_open_fsf_xconfig(erp_action);
if (retval == ZFCP_ERP_FAILED)
return ZFCP_ERP_FAILED;
return zfcp_erp_adapter_strategy_open_fsf_statusread(erp_action);
}
-/*
- * function:
- *
- * purpose:
- *
- * returns:
- */
static int
zfcp_erp_adapter_strategy_open_fsf_xconfig(struct zfcp_erp_action *erp_action)
{
zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *erp_action)
{
int ret;
- int retries;
- int sleep;
- struct zfcp_adapter *adapter = erp_action->adapter;
+ struct zfcp_adapter *adapter;
+ adapter = erp_action->adapter;
atomic_clear_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status);
- retries = 0;
- do {
- write_lock(&adapter->erp_lock);
- zfcp_erp_action_to_running(erp_action);
- write_unlock(&adapter->erp_lock);
- zfcp_erp_timeout_init(erp_action);
- ret = zfcp_fsf_exchange_port_data(erp_action, adapter, NULL);
- if (ret == -EOPNOTSUPP) {
- debug_text_event(adapter->erp_dbf, 3, "a_xport_notsupp");
- return ZFCP_ERP_SUCCEEDED;
- } else if (ret) {
- debug_text_event(adapter->erp_dbf, 3, "a_xport_failed");
- return ZFCP_ERP_FAILED;
- }
- debug_text_event(adapter->erp_dbf, 6, "a_xport_ok");
+ write_lock(&adapter->erp_lock);
+ zfcp_erp_action_to_running(erp_action);
+ write_unlock(&adapter->erp_lock);
- down(&adapter->erp_ready_sem);
- if (erp_action->status & ZFCP_STATUS_ERP_TIMEDOUT) {
- ZFCP_LOG_INFO("error: exchange of port data "
- "for adapter %s timed out\n",
- zfcp_get_busid_by_adapter(adapter));
- break;
- }
- if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
- &adapter->status))
- break;
+ zfcp_erp_timeout_init(erp_action);
+ ret = zfcp_fsf_exchange_port_data(erp_action, adapter, NULL);
+ if (ret == -EOPNOTSUPP) {
+ debug_text_event(adapter->erp_dbf, 3, "a_xport_notsupp");
+ return ZFCP_ERP_SUCCEEDED;
+ } else if (ret) {
+ debug_text_event(adapter->erp_dbf, 3, "a_xport_failed");
+ return ZFCP_ERP_FAILED;
+ }
+ debug_text_event(adapter->erp_dbf, 6, "a_xport_ok");
- if (retries < ZFCP_EXCHANGE_PORT_DATA_SHORT_RETRIES) {
- sleep = ZFCP_EXCHANGE_PORT_DATA_SHORT_SLEEP;
- retries++;
- } else
- sleep = ZFCP_EXCHANGE_PORT_DATA_LONG_SLEEP;
- schedule_timeout(sleep);
- } while (1);
+ ret = ZFCP_ERP_SUCCEEDED;
+ down(&adapter->erp_ready_sem);
+ if (erp_action->status & ZFCP_STATUS_ERP_TIMEDOUT) {
+ ZFCP_LOG_INFO("error: exchange port data timed out (adapter "
+ "%s)\n", zfcp_get_busid_by_adapter(adapter));
+ ret = ZFCP_ERP_FAILED;
+ }
+ if (!atomic_test_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status)) {
+ ZFCP_LOG_INFO("error: exchange port data failed (adapter "
+ "%s\n", zfcp_get_busid_by_adapter(adapter));
+ ret = ZFCP_ERP_FAILED;
+ }
- return ZFCP_ERP_SUCCEEDED;
+ return ret;
}
/*
"(adapter %s, wwpn=0x%016Lx)\n",
zfcp_get_busid_by_port(port),
port->wwpn);
+ else
+ scsi_flush_work(adapter->scsi_host);
}
zfcp_port_put(port);
break;
extern void zfcp_san_dbf_event_incoming_els(struct zfcp_fsf_req *);
extern void zfcp_scsi_dbf_event_result(const char *, int, struct zfcp_adapter *,
- struct scsi_cmnd *);
+ struct scsi_cmnd *,
+ struct zfcp_fsf_req *);
extern void zfcp_scsi_dbf_event_abort(const char *, struct zfcp_adapter *,
- struct scsi_cmnd *,
+ struct scsi_cmnd *, struct zfcp_fsf_req *,
struct zfcp_fsf_req *);
extern void zfcp_scsi_dbf_event_devreset(const char *, u8, struct zfcp_unit *,
struct scsi_cmnd *);
case FSF_PROT_LINK_DOWN:
zfcp_fsf_link_down_info_eval(adapter,
&prot_status_qual->link_down_info);
+ zfcp_erp_adapter_reopen(adapter, 0);
fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
- if (link_down == NULL) {
- zfcp_erp_adapter_reopen(adapter, 0);
- return;
- }
+ if (link_down == NULL)
+ goto out;
switch (link_down->error_code) {
case FSF_PSQ_LINK_NO_LIGHT:
link_down->explanation_code,
link_down->vendor_specific_code);
- switch (link_down->error_code) {
- case FSF_PSQ_LINK_NO_LIGHT:
- case FSF_PSQ_LINK_WRAP_PLUG:
- case FSF_PSQ_LINK_NO_FCP:
- case FSF_PSQ_LINK_FIRMWARE_UPDATE:
- zfcp_erp_adapter_reopen(adapter, 0);
- break;
- default:
- zfcp_erp_adapter_failed(adapter);
- }
+ out:
+ zfcp_erp_adapter_failed(adapter);
}
/*
return retval;
}
+/**
+ * zfcp_fsf_exchange_port_evaluate
+ * @fsf_req: fsf_req which belongs to xchg port data request
+ * @xchg_ok: specifies if xchg port data was incomplete or complete (0/1)
+ */
+static void
+zfcp_fsf_exchange_port_evaluate(struct zfcp_fsf_req *fsf_req, int xchg_ok)
+{
+ struct zfcp_adapter *adapter;
+ struct fsf_qtcb *qtcb;
+ struct fsf_qtcb_bottom_port *bottom, *data;
+ struct Scsi_Host *shost;
+
+ adapter = fsf_req->adapter;
+ qtcb = fsf_req->qtcb;
+ bottom = &qtcb->bottom.port;
+ shost = adapter->scsi_host;
+
+ data = (struct fsf_qtcb_bottom_port*) fsf_req->data;
+ if (data)
+ memcpy(data, bottom, sizeof(struct fsf_qtcb_bottom_port));
+
+ if (adapter->connection_features & FSF_FEATURE_NPIV_MODE)
+ fc_host_permanent_port_name(shost) = bottom->wwpn;
+ else
+ fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
+ fc_host_maxframe_size(shost) = bottom->maximum_frame_size;
+ fc_host_supported_speeds(shost) = bottom->supported_speed;
+}
/**
* zfcp_fsf_exchange_port_data_handler - handler for exchange_port_data request
static void
zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *fsf_req)
{
- struct zfcp_adapter *adapter = fsf_req->adapter;
- struct Scsi_Host *shost = adapter->scsi_host;
- struct fsf_qtcb *qtcb = fsf_req->qtcb;
- struct fsf_qtcb_bottom_port *bottom, *data;
+ struct zfcp_adapter *adapter;
+ struct fsf_qtcb *qtcb;
+
+ adapter = fsf_req->adapter;
+ qtcb = fsf_req->qtcb;
if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)
return;
switch (qtcb->header.fsf_status) {
case FSF_GOOD:
+ zfcp_fsf_exchange_port_evaluate(fsf_req, 1);
atomic_set_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status);
-
- bottom = &qtcb->bottom.port;
- data = (struct fsf_qtcb_bottom_port*) fsf_req->data;
- if (data)
- memcpy(data, bottom, sizeof(struct fsf_qtcb_bottom_port));
- if (adapter->connection_features & FSF_FEATURE_NPIV_MODE)
- fc_host_permanent_port_name(shost) = bottom->wwpn;
- else
- fc_host_permanent_port_name(shost) =
- fc_host_port_name(shost);
- fc_host_maxframe_size(shost) = bottom->maximum_frame_size;
- fc_host_supported_speeds(shost) = bottom->supported_speed;
break;
-
case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE:
+ zfcp_fsf_exchange_port_evaluate(fsf_req, 0);
atomic_set_mask(ZFCP_STATUS_ADAPTER_XPORT_OK, &adapter->status);
-
zfcp_fsf_link_down_info_eval(adapter,
&qtcb->header.fsf_status_qual.link_down_info);
break;
-
default:
debug_text_event(adapter->erp_dbf, 0, "xchg-port-ng");
debug_event(adapter->erp_dbf, 0,
ZFCP_LOG_DEBUG("scpnt->result =0x%x\n", scpnt->result);
if (scpnt->result != 0)
- zfcp_scsi_dbf_event_result("erro", 3, fsf_req->adapter, scpnt);
+ zfcp_scsi_dbf_event_result("erro", 3, fsf_req->adapter, scpnt, fsf_req);
else if (scpnt->retries > 0)
- zfcp_scsi_dbf_event_result("retr", 4, fsf_req->adapter, scpnt);
+ zfcp_scsi_dbf_event_result("retr", 4, fsf_req->adapter, scpnt, fsf_req);
else
- zfcp_scsi_dbf_event_result("norm", 6, fsf_req->adapter, scpnt);
+ zfcp_scsi_dbf_event_result("norm", 6, fsf_req->adapter, scpnt, fsf_req);
/* cleanup pointer (need this especially for abort) */
scpnt->host_scribble = NULL;
if ((scpnt->device != NULL) && (scpnt->device->host != NULL))
zfcp_scsi_dbf_event_result("fail", 4,
(struct zfcp_adapter*) scpnt->device->host->hostdata[0],
- scpnt);
+ scpnt, NULL);
/* return directly */
scpnt->scsi_done(scpnt);
}
old_fsf_req = (struct zfcp_fsf_req *) scpnt->host_scribble;
if (!old_fsf_req) {
write_unlock_irqrestore(&adapter->abort_lock, flags);
- zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, new_fsf_req);
+ zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL, NULL);
retval = SUCCESS;
goto out;
}
adapter, unit, 0);
if (!new_fsf_req) {
ZFCP_LOG_INFO("error: initiation of Abort FCP Cmnd failed\n");
+ zfcp_scsi_dbf_event_abort("nres", adapter, scpnt, NULL,
+ old_fsf_req);
retval = FAILED;
goto out;
}
/* status should be valid since signals were not permitted */
if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED) {
- zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, new_fsf_req);
+ zfcp_scsi_dbf_event_abort("okay", adapter, scpnt, new_fsf_req,
+ NULL);
retval = SUCCESS;
} else if (new_fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED) {
- zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, new_fsf_req);
+ zfcp_scsi_dbf_event_abort("lte2", adapter, scpnt, new_fsf_req,
+ NULL);
retval = SUCCESS;
} else {
- zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, new_fsf_req);
+ zfcp_scsi_dbf_event_abort("fail", adapter, scpnt, new_fsf_req,
+ NULL);
retval = FAILED;
}
zfcp_fsf_req_free(new_fsf_req);
ZFCP_DEFINE_ADAPTER_ATTR(peer_wwnn, "0x%016llx\n", adapter->peer_wwnn);
ZFCP_DEFINE_ADAPTER_ATTR(peer_wwpn, "0x%016llx\n", adapter->peer_wwpn);
ZFCP_DEFINE_ADAPTER_ATTR(peer_d_id, "0x%06x\n", adapter->peer_d_id);
-ZFCP_DEFINE_ADAPTER_ATTR(physical_wwpn, "0x%016llx\n", adapter->physical_wwpn);
-ZFCP_DEFINE_ADAPTER_ATTR(physical_s_id, "0x%06x\n", adapter->physical_s_id);
ZFCP_DEFINE_ADAPTER_ATTR(card_version, "0x%04x\n", adapter->hydra_version);
ZFCP_DEFINE_ADAPTER_ATTR(lic_version, "0x%08x\n", adapter->fsf_lic_version);
ZFCP_DEFINE_ADAPTER_ATTR(hardware_version, "0x%08x\n",
&dev_attr_peer_wwnn.attr,
&dev_attr_peer_wwpn.attr,
&dev_attr_peer_d_id.attr,
- &dev_attr_physical_wwpn.attr,
- &dev_attr_physical_s_id.attr,
&dev_attr_card_version.attr,
&dev_attr_lic_version.attr,
&dev_attr_status.attr,
Add support for embedded firmware error strings.
2.26.02.003 - Correctly handle single sgl's with use_sg=1.
2.26.02.004 - Add support for 9550SX controllers.
+ 2.26.02.005 - Fix use_sg == 0 mapping on systems with 4GB or higher.
*/
#include <linux/module.h>
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.004"
+#define TW_DRIVER_VERSION "2.26.02.005"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
dma_addr_t mapping;
struct scsi_cmnd *cmd = tw_dev->srb[request_id];
struct pci_dev *pdev = tw_dev->tw_pci_dev;
- int retval = 0;
+ dma_addr_t retval = 0;
if (cmd->request_bufflen == 0) {
retval = 0;
int i, sg_count;
struct scsi_cmnd *srb = NULL;
struct scatterlist *sglist = NULL;
- u32 buffaddr = 0x0;
+ dma_addr_t buffaddr = 0x0;
int retval = 1;
if (tw_dev->srb[request_id]) {
int status = 0;
struct fib * fibptr;
- if (!(fibptr = fib_alloc(dev)))
+ if (!(fibptr = aac_fib_alloc(dev)))
return -ENOMEM;
- fib_init(fibptr);
+ aac_fib_init(fibptr);
{
struct aac_get_config_status *dinfo;
dinfo = (struct aac_get_config_status *) fib_data(fibptr);
dinfo->count = cpu_to_le32(sizeof(((struct aac_get_config_status_resp *)NULL)->data));
}
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
fibptr,
sizeof (struct aac_get_config_status),
FsaNormal,
status = -EINVAL;
}
}
- fib_complete(fibptr);
+ aac_fib_complete(fibptr);
/* Send a CT_COMMIT_CONFIG to enable discovery of devices */
if (status >= 0) {
if (commit == 1) {
struct aac_commit_config * dinfo;
- fib_init(fibptr);
+ aac_fib_init(fibptr);
dinfo = (struct aac_commit_config *) fib_data(fibptr);
dinfo->command = cpu_to_le32(VM_ContainerConfig);
dinfo->type = cpu_to_le32(CT_COMMIT_CONFIG);
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
fibptr,
sizeof (struct aac_commit_config),
FsaNormal,
1, 1,
NULL, NULL);
- fib_complete(fibptr);
+ aac_fib_complete(fibptr);
} else if (commit == 0) {
printk(KERN_WARNING
"aac_get_config_status: Foreign device configurations are being ignored\n");
}
}
- fib_free(fibptr);
+ aac_fib_free(fibptr);
return status;
}
instance = dev->scsi_host_ptr->unique_id;
- if (!(fibptr = fib_alloc(dev)))
+ if (!(fibptr = aac_fib_alloc(dev)))
return -ENOMEM;
- fib_init(fibptr);
+ aac_fib_init(fibptr);
dinfo = (struct aac_get_container_count *) fib_data(fibptr);
dinfo->command = cpu_to_le32(VM_ContainerConfig);
dinfo->type = cpu_to_le32(CT_GET_CONTAINER_COUNT);
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
fibptr,
sizeof (struct aac_get_container_count),
FsaNormal,
if (status >= 0) {
dresp = (struct aac_get_container_count_resp *)fib_data(fibptr);
maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
- fib_complete(fibptr);
+ aac_fib_complete(fibptr);
}
if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
fsa_dev_ptr = (struct fsa_dev_info *) kmalloc(
sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL);
if (!fsa_dev_ptr) {
- fib_free(fibptr);
+ aac_fib_free(fibptr);
return -ENOMEM;
}
memset(fsa_dev_ptr, 0, sizeof(*fsa_dev_ptr) * maximum_num_containers);
fsa_dev_ptr[index].devname[0] = '\0';
- fib_init(fibptr);
+ aac_fib_init(fibptr);
dinfo = (struct aac_query_mount *) fib_data(fibptr);
dinfo->command = cpu_to_le32(VM_NameServe);
dinfo->count = cpu_to_le32(index);
dinfo->type = cpu_to_le32(FT_FILESYS);
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
fibptr,
sizeof (struct aac_query_mount),
FsaNormal,
dinfo->count = cpu_to_le32(index);
dinfo->type = cpu_to_le32(FT_FILESYS);
- if (fib_send(ContainerCommand,
+ if (aac_fib_send(ContainerCommand,
fibptr,
sizeof(struct aac_query_mount),
FsaNormal,
if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY)
fsa_dev_ptr[index].ro = 1;
}
- fib_complete(fibptr);
+ aac_fib_complete(fibptr);
/*
* If there are no more containers, then stop asking.
*/
break;
}
}
- fib_free(fibptr);
+ aac_fib_free(fibptr);
return status;
}
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
- fib_complete(fibptr);
- fib_free(fibptr);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
scsicmd->scsi_done(scsicmd);
}
dev = (struct aac_dev *)scsicmd->device->host->hostdata;
- if (!(cmd_fibcontext = fib_alloc(dev)))
+ if (!(cmd_fibcontext = aac_fib_alloc(dev)))
return -ENOMEM;
- fib_init(cmd_fibcontext);
+ aac_fib_init(cmd_fibcontext);
dinfo = (struct aac_get_name *) fib_data(cmd_fibcontext);
dinfo->command = cpu_to_le32(VM_ContainerConfig);
dinfo->cid = cpu_to_le32(cid);
dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
cmd_fibcontext,
sizeof (struct aac_get_name),
FsaNormal,
if (status == -EINPROGRESS)
return 0;
- printk(KERN_WARNING "aac_get_container_name: fib_send failed with status: %d.\n", status);
- fib_complete(cmd_fibcontext);
- fib_free(cmd_fibcontext);
+ printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
return -1;
}
/**
- * probe_container - query a logical volume
+ * aac_probe_container - query a logical volume
* @dev: device to query
* @cid: container identifier
*
* is updated in the struct fsa_dev_info structure rather than returned.
*/
-int probe_container(struct aac_dev *dev, int cid)
+int aac_probe_container(struct aac_dev *dev, int cid)
{
struct fsa_dev_info *fsa_dev_ptr;
int status;
fsa_dev_ptr = dev->fsa_dev;
instance = dev->scsi_host_ptr->unique_id;
- if (!(fibptr = fib_alloc(dev)))
+ if (!(fibptr = aac_fib_alloc(dev)))
return -ENOMEM;
- fib_init(fibptr);
+ aac_fib_init(fibptr);
dinfo = (struct aac_query_mount *)fib_data(fibptr);
dinfo->count = cpu_to_le32(cid);
dinfo->type = cpu_to_le32(FT_FILESYS);
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
fibptr,
sizeof(struct aac_query_mount),
FsaNormal,
1, 1,
NULL, NULL);
if (status < 0) {
- printk(KERN_WARNING "aacraid: probe_container query failed.\n");
+ printk(KERN_WARNING "aacraid: aac_probe_container query failed.\n");
goto error;
}
dinfo->count = cpu_to_le32(cid);
dinfo->type = cpu_to_le32(FT_FILESYS);
- if (fib_send(ContainerCommand,
+ if (aac_fib_send(ContainerCommand,
fibptr,
sizeof(struct aac_query_mount),
FsaNormal,
}
error:
- fib_complete(fibptr);
- fib_free(fibptr);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
return status;
}
struct aac_bus_info *command;
struct aac_bus_info_response *bus_info;
- if (!(fibptr = fib_alloc(dev)))
+ if (!(fibptr = aac_fib_alloc(dev)))
return -ENOMEM;
- fib_init(fibptr);
+ aac_fib_init(fibptr);
info = (struct aac_adapter_info *) fib_data(fibptr);
memset(info,0,sizeof(*info));
- rcode = fib_send(RequestAdapterInfo,
+ rcode = aac_fib_send(RequestAdapterInfo,
fibptr,
sizeof(*info),
FsaNormal,
NULL);
if (rcode < 0) {
- fib_complete(fibptr);
- fib_free(fibptr);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
return rcode;
}
memcpy(&dev->adapter_info, info, sizeof(*info));
if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) {
struct aac_supplement_adapter_info * info;
- fib_init(fibptr);
+ aac_fib_init(fibptr);
info = (struct aac_supplement_adapter_info *) fib_data(fibptr);
memset(info,0,sizeof(*info));
- rcode = fib_send(RequestSupplementAdapterInfo,
+ rcode = aac_fib_send(RequestSupplementAdapterInfo,
fibptr,
sizeof(*info),
FsaNormal,
* GetBusInfo
*/
- fib_init(fibptr);
+ aac_fib_init(fibptr);
bus_info = (struct aac_bus_info_response *) fib_data(fibptr);
command->MethodId = cpu_to_le32(1);
command->CtlCmd = cpu_to_le32(GetBusInfo);
- rcode = fib_send(ContainerCommand,
+ rcode = aac_fib_send(ContainerCommand,
fibptr,
sizeof (*bus_info),
FsaNormal,
}
}
- fib_complete(fibptr);
- fib_free(fibptr);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
return rcode;
}
? sizeof(scsicmd->sense_buffer)
: sizeof(dev->fsa_dev[cid].sense_data));
}
- fib_complete(fibptr);
- fib_free(fibptr);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
scsicmd->scsi_done(scsicmd);
}
/*
* Alocate and initialize a Fib
*/
- if (!(cmd_fibcontext = fib_alloc(dev))) {
+ if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
return -1;
}
- fib_init(cmd_fibcontext);
+ aac_fib_init(cmd_fibcontext);
if (dev->raw_io_interface) {
struct aac_raw_io *readcmd;
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ContainerRawIo,
+ status = aac_fib_send(ContainerRawIo,
cmd_fibcontext,
fibsize,
FsaNormal,
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ContainerCommand64,
+ status = aac_fib_send(ContainerCommand64,
cmd_fibcontext,
fibsize,
FsaNormal,
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
cmd_fibcontext,
fibsize,
FsaNormal,
if (status == -EINPROGRESS)
return 0;
- printk(KERN_WARNING "aac_read: fib_send failed with status: %d.\n", status);
+ printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status);
/*
* For some reason, the Fib didn't queue, return QUEUE_FULL
*/
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
scsicmd->scsi_done(scsicmd);
- fib_complete(cmd_fibcontext);
- fib_free(cmd_fibcontext);
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
return 0;
}
/*
* Allocate and initialize a Fib then setup a BlockWrite command
*/
- if (!(cmd_fibcontext = fib_alloc(dev))) {
+ if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
scsicmd->result = DID_ERROR << 16;
scsicmd->scsi_done(scsicmd);
return 0;
}
- fib_init(cmd_fibcontext);
+ aac_fib_init(cmd_fibcontext);
if (dev->raw_io_interface) {
struct aac_raw_io *writecmd;
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ContainerRawIo,
+ status = aac_fib_send(ContainerRawIo,
cmd_fibcontext,
fibsize,
FsaNormal,
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ContainerCommand64,
+ status = aac_fib_send(ContainerCommand64,
cmd_fibcontext,
fibsize,
FsaNormal,
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
cmd_fibcontext,
fibsize,
FsaNormal,
return 0;
}
- printk(KERN_WARNING "aac_write: fib_send failed with status: %d\n", status);
+ printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status);
/*
* For some reason, the Fib didn't queue, return QUEUE_FULL
*/
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_TASK_SET_FULL;
scsicmd->scsi_done(scsicmd);
- fib_complete(cmd_fibcontext);
- fib_free(cmd_fibcontext);
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
return 0;
}
sizeof(cmd->sense_buffer)));
}
- fib_complete(fibptr);
- fib_free(fibptr);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
cmd->scsi_done(cmd);
}
* Allocate and initialize a Fib
*/
if (!(cmd_fibcontext =
- fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata)))
+ aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata)))
return SCSI_MLQUEUE_HOST_BUSY;
- fib_init(cmd_fibcontext);
+ aac_fib_init(cmd_fibcontext);
synchronizecmd = fib_data(cmd_fibcontext);
synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
cmd_fibcontext,
sizeof(struct aac_synchronize),
FsaNormal,
return 0;
printk(KERN_WARNING
- "aac_synchronize: fib_send failed with status: %d.\n", status);
- fib_complete(cmd_fibcontext);
- fib_free(cmd_fibcontext);
+ "aac_synchronize: aac_fib_send failed with status: %d.\n", status);
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
return SCSI_MLQUEUE_HOST_BUSY;
}
* itself.
*/
if (scmd_id(scsicmd) != host->this_id) {
- if ((scsicmd->device->channel == 0) ){
+ if ((scsicmd->device->channel == CONTAINER_CHANNEL)) {
if( (scsicmd->device->id >= dev->maximum_num_containers) || (scsicmd->device->lun != 0)){
scsicmd->result = DID_NO_CONNECT << 16;
scsicmd->scsi_done(scsicmd);
case READ_CAPACITY:
case TEST_UNIT_READY:
spin_unlock_irq(host->host_lock);
- probe_container(dev, cid);
+ aac_probe_container(dev, cid);
if ((fsa_dev_ptr[cid].valid & 1) == 0)
fsa_dev_ptr[cid].valid = 0;
spin_lock_irq(host->host_lock);
case SRB_STATUS_ERROR_RECOVERY:
case SRB_STATUS_PENDING:
case SRB_STATUS_SUCCESS:
- if(scsicmd->cmnd[0] == INQUIRY ){
- u8 b;
- u8 b1;
- /* We can't expose disk devices because we can't tell whether they
- * are the raw container drives or stand alone drives. If they have
- * the removable bit set then we should expose them though.
- */
- b = (*(u8*)scsicmd->buffer)&0x1f;
- b1 = ((u8*)scsicmd->buffer)[1];
- if( b==TYPE_TAPE || b==TYPE_WORM || b==TYPE_ROM || b==TYPE_MOD|| b==TYPE_MEDIUM_CHANGER
- || (b==TYPE_DISK && (b1&0x80)) ){
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
- /*
- * We will allow disk devices if in RAID/SCSI mode and
- * the channel is 2
- */
- } else if ((dev->raid_scsi_mode) &&
- (scmd_channel(scsicmd) == 2)) {
- scsicmd->result = DID_OK << 16 |
- COMMAND_COMPLETE << 8;
- } else {
- scsicmd->result = DID_NO_CONNECT << 16 |
- COMMAND_COMPLETE << 8;
- }
- } else {
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
- }
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_DATA_OVERRUN:
switch(scsicmd->cmnd[0]){
scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
break;
case INQUIRY: {
- u8 b;
- u8 b1;
- /* We can't expose disk devices because we can't tell whether they
- * are the raw container drives or stand alone drives
- */
- b = (*(u8*)scsicmd->buffer)&0x0f;
- b1 = ((u8*)scsicmd->buffer)[1];
- if( b==TYPE_TAPE || b==TYPE_WORM || b==TYPE_ROM || b==TYPE_MOD|| b==TYPE_MEDIUM_CHANGER
- || (b==TYPE_DISK && (b1&0x80)) ){
- scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
- /*
- * We will allow disk devices if in RAID/SCSI mode and
- * the channel is 2
- */
- } else if ((dev->raid_scsi_mode) &&
- (scmd_channel(scsicmd) == 2)) {
- scsicmd->result = DID_OK << 16 |
- COMMAND_COMPLETE << 8;
- } else {
- scsicmd->result = DID_NO_CONNECT << 16 |
- COMMAND_COMPLETE << 8;
- }
+ scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
break;
}
default:
*/
scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
- fib_complete(fibptr);
- fib_free(fibptr);
+ aac_fib_complete(fibptr);
+ aac_fib_free(fibptr);
scsicmd->scsi_done(scsicmd);
}
/*
* Allocate and initialize a Fib then setup a BlockWrite command
*/
- if (!(cmd_fibcontext = fib_alloc(dev))) {
+ if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
return -1;
}
- fib_init(cmd_fibcontext);
+ aac_fib_init(cmd_fibcontext);
srbcmd = (struct aac_srb*) fib_data(cmd_fibcontext);
srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi);
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ScsiPortCommand64, cmd_fibcontext,
+ status = aac_fib_send(ScsiPortCommand64, cmd_fibcontext,
fibsize, FsaNormal, 0, 1,
(fib_callback) aac_srb_callback,
(void *) scsicmd);
/*
* Now send the Fib to the adapter
*/
- status = fib_send(ScsiPortCommand, cmd_fibcontext, fibsize, FsaNormal, 0, 1,
+ status = aac_fib_send(ScsiPortCommand, cmd_fibcontext, fibsize, FsaNormal, 0, 1,
(fib_callback) aac_srb_callback, (void *) scsicmd);
}
/*
return 0;
}
- printk(KERN_WARNING "aac_srb: fib_send failed with status: %d\n", status);
- fib_complete(cmd_fibcontext);
- fib_free(cmd_fibcontext);
+ printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status);
+ aac_fib_complete(cmd_fibcontext);
+ aac_fib_free(cmd_fibcontext);
return -1;
}
struct scsi_cmnd;
const char *aac_driverinfo(struct Scsi_Host *);
-struct fib *fib_alloc(struct aac_dev *dev);
-int fib_setup(struct aac_dev *dev);
-void fib_map_free(struct aac_dev *dev);
-void fib_free(struct fib * context);
-void fib_init(struct fib * context);
+struct fib *aac_fib_alloc(struct aac_dev *dev);
+int aac_fib_setup(struct aac_dev *dev);
+void aac_fib_map_free(struct aac_dev *dev);
+void aac_fib_free(struct fib * context);
+void aac_fib_init(struct fib * context);
void aac_printf(struct aac_dev *dev, u32 val);
-int fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt);
+int aac_fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt);
int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
-int fib_complete(struct fib * context);
+int aac_fib_complete(struct fib * context);
#define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data)
struct aac_dev *aac_init_adapter(struct aac_dev *dev);
int aac_get_config_status(struct aac_dev *dev);
unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
int aac_command_thread(struct aac_dev * dev);
int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
-int fib_adapter_complete(struct fib * fibptr, unsigned short size);
+int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
struct aac_driver_ident* aac_get_driver_ident(int devtype);
int aac_get_adapter_info(struct aac_dev* dev);
int aac_send_shutdown(struct aac_dev *dev);
-int probe_container(struct aac_dev *dev, int cid);
+int aac_probe_container(struct aac_dev *dev, int cid);
extern int numacb;
extern int acbsize;
extern char aac_driver_version[];
unsigned size;
int retval;
- fibptr = fib_alloc(dev);
+ fibptr = aac_fib_alloc(dev);
if(fibptr == NULL) {
return -ENOMEM;
}
* First copy in the header so that we can check the size field.
*/
if (copy_from_user((void *)kfib, arg, sizeof(struct aac_fibhdr))) {
- fib_free(fibptr);
+ aac_fib_free(fibptr);
return -EFAULT;
}
/*
*/
kfib->header.XferState = 0;
} else {
- retval = fib_send(le16_to_cpu(kfib->header.Command), fibptr,
+ retval = aac_fib_send(le16_to_cpu(kfib->header.Command), fibptr,
le16_to_cpu(kfib->header.Size) , FsaNormal,
1, 1, NULL, NULL);
if (retval) {
goto cleanup;
}
- if (fib_complete(fibptr) != 0) {
+ if (aac_fib_complete(fibptr) != 0) {
retval = -EINVAL;
goto cleanup;
}
fibptr->hw_fib_pa = hw_fib_pa;
fibptr->hw_fib = hw_fib;
}
- fib_free(fibptr);
+ aac_fib_free(fibptr);
return retval;
}
/*
* Allocate and initialize a Fib then setup a BlockWrite command
*/
- if (!(srbfib = fib_alloc(dev))) {
+ if (!(srbfib = aac_fib_alloc(dev))) {
return -ENOMEM;
}
- fib_init(srbfib);
+ aac_fib_init(srbfib);
srbcmd = (struct aac_srb*) fib_data(srbfib);
srbcmd->count = cpu_to_le32(byte_count);
psg->count = cpu_to_le32(sg_indx+1);
- status = fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL);
+ status = aac_fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL);
} else {
struct user_sgmap* upsg = &user_srbcmd->sg;
struct sgmap* psg = &srbcmd->sg;
}
srbcmd->count = cpu_to_le32(byte_count);
psg->count = cpu_to_le32(sg_indx+1);
- status = fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
+ status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
}
if (status != 0){
for(i=0; i <= sg_indx; i++){
kfree(sg_list[i]);
}
- fib_complete(srbfib);
- fib_free(srbfib);
+ aac_fib_complete(srbfib);
+ aac_fib_free(srbfib);
return rcode;
}
struct aac_close *cmd;
int status;
- fibctx = fib_alloc(dev);
+ fibctx = aac_fib_alloc(dev);
if (!fibctx)
return -ENOMEM;
- fib_init(fibctx);
+ aac_fib_init(fibctx);
cmd = (struct aac_close *) fib_data(fibctx);
cmd->command = cpu_to_le32(VM_CloseAll);
cmd->cid = cpu_to_le32(0xffffffff);
- status = fib_send(ContainerCommand,
+ status = aac_fib_send(ContainerCommand,
fibctx,
sizeof(struct aac_close),
FsaNormal,
NULL, NULL);
if (status == 0)
- fib_complete(fibctx);
- fib_free(fibctx);
+ aac_fib_complete(fibctx);
+ aac_fib_free(fibctx);
return status;
}
/*
* Initialize the list of fibs
*/
- if(fib_setup(dev)<0){
+ if (aac_fib_setup(dev) < 0) {
kfree(dev->queues);
return NULL;
}
}
/**
- * fib_map_free - free the fib objects
+ * aac_fib_map_free - free the fib objects
* @dev: Adapter to free
*
* Free the PCI mappings and the memory allocated for FIB blocks
* on this adapter.
*/
-void fib_map_free(struct aac_dev *dev)
+void aac_fib_map_free(struct aac_dev *dev)
{
pci_free_consistent(dev->pdev, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB), dev->hw_fib_va, dev->hw_fib_pa);
}
/**
- * fib_setup - setup the fibs
+ * aac_fib_setup - setup the fibs
* @dev: Adapter to set up
*
* Allocate the PCI space for the fibs, map it and then intialise the
* fib area, the unmapped fib data and also the free list
*/
-int fib_setup(struct aac_dev * dev)
+int aac_fib_setup(struct aac_dev * dev)
{
struct fib *fibptr;
struct hw_fib *hw_fib_va;
}
/**
- * fib_alloc - allocate a fib
+ * aac_fib_alloc - allocate a fib
* @dev: Adapter to allocate the fib for
*
* Allocate a fib from the adapter fib pool. If the pool is empty we
* return NULL.
*/
-struct fib * fib_alloc(struct aac_dev *dev)
+struct fib *aac_fib_alloc(struct aac_dev *dev)
{
struct fib * fibptr;
unsigned long flags;
}
/**
- * fib_free - free a fib
+ * aac_fib_free - free a fib
* @fibptr: fib to free up
*
* Frees up a fib and places it on the appropriate queue
* (either free or timed out)
*/
-void fib_free(struct fib * fibptr)
+void aac_fib_free(struct fib *fibptr)
{
unsigned long flags;
fibptr->dev->timeout_fib = fibptr;
} else {
if (fibptr->hw_fib->header.XferState != 0) {
- printk(KERN_WARNING "fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
+ printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
(void*)fibptr,
le32_to_cpu(fibptr->hw_fib->header.XferState));
}
}
/**
- * fib_init - initialise a fib
+ * aac_fib_init - initialise a fib
* @fibptr: The fib to initialize
*
* Set up the generic fib fields ready for use
*/
-void fib_init(struct fib *fibptr)
+void aac_fib_init(struct fib *fibptr)
{
struct hw_fib *hw_fib = fibptr->hw_fib;
*/
/**
- * fib_send - send a fib to the adapter
+ * aac_fib_send - send a fib to the adapter
* @command: Command to send
* @fibptr: The fib
* @size: Size of fib data area
* response FIB is received from the adapter.
*/
-int fib_send(u16 command, struct fib * fibptr, unsigned long size, int priority, int wait, int reply, fib_callback callback, void * callback_data)
+int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
+ int priority, int wait, int reply, fib_callback callback,
+ void *callback_data)
{
struct aac_dev * dev = fibptr->dev;
struct hw_fib * hw_fib = fibptr->hw_fib;
q->numpending++;
*(q->headers.producer) = cpu_to_le32(index + 1);
spin_unlock_irqrestore(q->lock, qflags);
- dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index));
+ dprintk((KERN_DEBUG "aac_fib_send: inserting a queue entry at index %d.\n",index));
if (!(nointr & aac_config.irq_mod))
aac_adapter_notify(dev, AdapNormCmdQueue);
}
list_del(&fibptr->queue);
spin_unlock_irqrestore(q->lock, qflags);
if (wait == -1) {
- printk(KERN_ERR "aacraid: fib_send: first asynchronous command timed out.\n"
+ printk(KERN_ERR "aacraid: aac_fib_send: first asynchronous command timed out.\n"
"Usually a result of a PCI interrupt routing problem;\n"
"update mother board BIOS or consider utilizing one of\n"
"the SAFE mode kernel options (acpi, apic etc)\n");
}
/**
- * fib_adapter_complete - complete adapter issued fib
+ * aac_fib_adapter_complete - complete adapter issued fib
* @fibptr: fib to complete
* @size: size of fib
*
* the adapter.
*/
-int fib_adapter_complete(struct fib * fibptr, unsigned short size)
+int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
{
struct hw_fib * hw_fib = fibptr->hw_fib;
struct aac_dev * dev = fibptr->dev;
}
else
{
- printk(KERN_WARNING "fib_adapter_complete: Unknown xferstate detected.\n");
+ printk(KERN_WARNING "aac_fib_adapter_complete: Unknown xferstate detected.\n");
BUG();
}
return 0;
}
/**
- * fib_complete - fib completion handler
+ * aac_fib_complete - fib completion handler
* @fib: FIB to complete
*
* Will do all necessary work to complete a FIB.
*/
-int fib_complete(struct fib * fibptr)
+int aac_fib_complete(struct fib *fibptr)
{
struct hw_fib * hw_fib = fibptr->hw_fib;
if (!dev || !dev->scsi_host_ptr)
return;
/*
- * force reload of disk info via probe_container
+ * force reload of disk info via aac_probe_container
*/
if ((device_config_needed == CHANGE)
&& (dev->fsa_dev[container].valid == 1))
dev->fsa_dev[container].valid = 2;
if ((device_config_needed == CHANGE) ||
(device_config_needed == ADD))
- probe_container(dev, container);
+ aac_probe_container(dev, container);
device = scsi_device_lookup(dev->scsi_host_ptr,
CONTAINER_TO_CHANNEL(container),
CONTAINER_TO_ID(container),
/* Handle Driver Notify Events */
aac_handle_aif(dev, fib);
*(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
- fib_adapter_complete(fib, (u16)sizeof(u32));
+ aac_fib_adapter_complete(fib, (u16)sizeof(u32));
} else {
struct list_head *entry;
/* The u32 here is important and intended. We are using
* Set the status of this FIB
*/
*(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
- fib_adapter_complete(fib, sizeof(u32));
+ aac_fib_adapter_complete(fib, sizeof(u32));
spin_unlock_irqrestore(&dev->fib_lock, flagv);
/* Free up the remaining resources */
hw_fib_p = hw_fib_pool;
* Set the status of this FIB
*/
*(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
- fib_adapter_complete(fib, sizeof(u32));
+ aac_fib_adapter_complete(fib, sizeof(u32));
spin_lock_irqsave(q->lock, flags);
}
}
static int aac_slave_configure(struct scsi_device *sdev)
{
- struct Scsi_Host *host = sdev->host;
+ if (sdev_channel(sdev) == CONTAINER_CHANNEL) {
+ sdev->skip_ms_page_8 = 1;
+ sdev->skip_ms_page_3f = 1;
+ }
+ if ((sdev->type == TYPE_DISK) &&
+ (sdev_channel(sdev) != CONTAINER_CHANNEL)) {
+ struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+ if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
+ sdev->no_uld_attach = 1;
+ }
+ if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
+ (sdev_channel(sdev) == CONTAINER_CHANNEL)) {
+ struct scsi_device * dev;
+ struct Scsi_Host *host = sdev->host;
+ unsigned num_lsu = 0;
+ unsigned num_one = 0;
+ unsigned depth;
- if (sdev->tagged_supported)
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, 128);
- else
+ __shost_for_each_device(dev, host) {
+ if (dev->tagged_supported && (dev->type == TYPE_DISK) &&
+ (sdev_channel(dev) == CONTAINER_CHANNEL))
+ ++num_lsu;
+ else
+ ++num_one;
+ }
+ if (num_lsu == 0)
+ ++num_lsu;
+ depth = (host->can_queue - num_one) / num_lsu;
+ if (depth > 256)
+ depth = 256;
+ else if (depth < 2)
+ depth = 2;
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
+ if (!(((struct aac_dev *)host->hostdata)->adapter_info.options &
+ AAC_OPT_NEW_COMM))
+ blk_queue_max_segment_size(sdev->request_queue, 65536);
+ } else
scsi_adjust_queue_depth(sdev, 0, 1);
- if (!(((struct aac_dev *)host->hostdata)->adapter_info.options
- & AAC_OPT_NEW_COMM))
- blk_queue_max_segment_size(sdev->request_queue, 65536);
-
return 0;
}
/*
* max channel will be the physical channels plus 1 virtual channel
- * all containers are on the virtual channel 0
+ * all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
* physical channels are address by their actual physical number+1
*/
if (aac->nondasd_support == 1)
aac_adapter_disable_int(aac);
free_irq(pdev->irq, aac);
out_unmap:
- fib_map_free(aac);
+ aac_fib_map_free(aac);
pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
kfree(aac->queues);
iounmap(aac->regs.sa);
aac_send_shutdown(aac);
aac_adapter_disable_int(aac);
- fib_map_free(aac);
+ aac_fib_map_free(aac);
pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
aac->comm_phys);
kfree(aac->queues);
}
#endif
- } else {
+ } else if (scp->request_bufflen) {
scp->SCp.Status = GDTH_MAP_SINGLE;
scp->SCp.Message = (read_write == 1 ?
PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
ipr_erp_start(ioa_cfg, ipr_cmd);
}
-/**
- * ipr_save_ioafp_mode_select - Save adapters mode select data
- * @ioa_cfg: ioa config struct
- * @scsi_cmd: scsi command struct
- *
- * This function saves mode select data for the adapter to
- * use following an adapter reset.
- *
- * Return value:
- * 0 on success / SCSI_MLQUEUE_HOST_BUSY on failure
- **/
-static int ipr_save_ioafp_mode_select(struct ipr_ioa_cfg *ioa_cfg,
- struct scsi_cmnd *scsi_cmd)
-{
- if (!ioa_cfg->saved_mode_pages) {
- ioa_cfg->saved_mode_pages = kmalloc(sizeof(struct ipr_mode_pages),
- GFP_ATOMIC);
- if (!ioa_cfg->saved_mode_pages) {
- dev_err(&ioa_cfg->pdev->dev,
- "IOA mode select buffer allocation failed\n");
- return SCSI_MLQUEUE_HOST_BUSY;
- }
- }
-
- memcpy(ioa_cfg->saved_mode_pages, scsi_cmd->buffer, scsi_cmd->cmnd[4]);
- ioa_cfg->saved_mode_page_len = scsi_cmd->cmnd[4];
- return 0;
-}
-
/**
* ipr_queuecommand - Queue a mid-layer request
* @scsi_cmd: scsi command struct
(!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE))
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD;
- if (ipr_is_ioa_resource(res) && scsi_cmd->cmnd[0] == MODE_SELECT)
- rc = ipr_save_ioafp_mode_select(ioa_cfg, scsi_cmd);
-
if (likely(rc == 0))
rc = ipr_build_ioadl(ioa_cfg, ipr_cmd);
int length;
ENTER;
- if (ioa_cfg->saved_mode_pages) {
- memcpy(mode_pages, ioa_cfg->saved_mode_pages,
- ioa_cfg->saved_mode_page_len);
- length = ioa_cfg->saved_mode_page_len;
- } else {
- ipr_scsi_bus_speed_limit(ioa_cfg);
- ipr_check_term_power(ioa_cfg, mode_pages);
- ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages);
- length = mode_pages->hdr.length + 1;
- mode_pages->hdr.length = 0;
- }
+ ipr_scsi_bus_speed_limit(ioa_cfg);
+ ipr_check_term_power(ioa_cfg, mode_pages);
+ ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages);
+ length = mode_pages->hdr.length + 1;
+ mode_pages->hdr.length = 0;
ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11,
ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages),
}
ipr_free_dump(ioa_cfg);
- kfree(ioa_cfg->saved_mode_pages);
kfree(ioa_cfg->trace);
}
/*
* Literals
*/
-#define IPR_DRIVER_VERSION "2.1.1"
-#define IPR_DRIVER_DATE "(November 15, 2005)"
+#define IPR_DRIVER_VERSION "2.1.2"
+#define IPR_DRIVER_DATE "(February 8, 2006)"
/*
* IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
struct Scsi_Host *host;
struct pci_dev *pdev;
struct ipr_sglist *ucode_sglist;
- struct ipr_mode_pages *saved_mode_pages;
u8 saved_mode_page_len;
struct work_struct work_q;
spin_unlock_irqrestore(&session->lock, flags);
set_bit(SUSPEND_BIT, &conn->suspend_tx);
set_bit(SUSPEND_BIT, &conn->suspend_rx);
- iscsi_conn_error(iscsi_handle(conn), err);
+ iscsi_conn_error(conn->cls_conn, err);
}
static inline int
if (sc->sc_data_direction == DMA_TO_DEVICE) {
struct iscsi_data_task *dtask, *n;
/* WRITE: cleanup Data-Out's if any */
- spin_lock(&conn->lock);
list_for_each_entry_safe(dtask, n, &ctask->dataqueue, item) {
list_del(&dtask->item);
mempool_free(dtask, ctask->datapool);
}
- spin_unlock(&conn->lock);
}
ctask->xmstate = XMSTATE_IDLE;
ctask->r2t = NULL;
break;
if (!conn->in.datalen) {
- rc = iscsi_recv_pdu(iscsi_handle(conn), hdr,
+ rc = iscsi_recv_pdu(conn->cls_conn, hdr,
NULL, 0);
if (conn->login_mtask != mtask) {
spin_lock(&session->lock);
if (!conn->in.datalen) {
struct iscsi_mgmt_task *mtask;
- rc = iscsi_recv_pdu(iscsi_handle(conn), hdr,
+ rc = iscsi_recv_pdu(conn->cls_conn, hdr,
NULL, 0);
mtask = (struct iscsi_mgmt_task *)
session->mgmt_cmds[conn->in.itt -
rc = iscsi_check_assign_cmdsn(session,
(struct iscsi_nopin*)hdr);
if (!rc && hdr->ttt != ISCSI_RESERVED_TAG)
- rc = iscsi_recv_pdu(iscsi_handle(conn),
+ rc = iscsi_recv_pdu(conn->cls_conn,
hdr, NULL, 0);
} else
rc = ISCSI_ERR_PROTO;
goto exit;
}
- rc = iscsi_recv_pdu(iscsi_handle(conn), conn->in.hdr,
+ rc = iscsi_recv_pdu(conn->cls_conn, conn->in.hdr,
conn->data, conn->in.datalen);
if (!rc && conn->datadgst_en &&
}
static struct iscsi_cls_conn *
-iscsi_conn_create(struct Scsi_Host *shost, uint32_t conn_idx)
+iscsi_conn_create(struct iscsi_cls_session *cls_session, uint32_t conn_idx)
{
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
struct iscsi_conn *conn;
struct iscsi_cls_conn *cls_conn;
- cls_conn = iscsi_create_conn(hostdata_session(shost->hostdata),
- conn_idx);
+ cls_conn = iscsi_create_conn(cls_session, conn_idx);
if (!cls_conn)
return NULL;
conn = cls_conn->dd_data;
+ memset(conn, 0, sizeof(*conn));
- memset(conn, 0, sizeof(struct iscsi_conn));
+ conn->cls_conn = cls_conn;
conn->c_stage = ISCSI_CONN_INITIAL_STAGE;
conn->in_progress = IN_PROGRESS_WAIT_HEADER;
conn->id = conn_idx;
conn->data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
conn->max_recv_dlength = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
- spin_lock_init(&conn->lock);
-
/* initialize general xmit PDU commands queue */
conn->xmitqueue = kfifo_alloc(session->cmds_max * sizeof(void*),
GFP_KERNEL, NULL);
}
static int
-iscsi_conn_bind(iscsi_sessionh_t sessionh, iscsi_connh_t connh,
- uint32_t transport_fd, int is_leading)
+iscsi_conn_bind(struct iscsi_cls_session *cls_session,
+ struct iscsi_cls_conn *cls_conn, uint32_t transport_fd,
+ int is_leading)
{
- struct iscsi_session *session = iscsi_ptr(sessionh);
- struct iscsi_conn *tmp = ERR_PTR(-EEXIST), *conn = iscsi_ptr(connh);
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
+ struct iscsi_conn *tmp = ERR_PTR(-EEXIST), *conn = cls_conn->dd_data;
struct sock *sk;
struct socket *sock;
int err;
}
static int
-iscsi_conn_start(iscsi_connh_t connh)
+iscsi_conn_start(struct iscsi_cls_conn *cls_conn)
{
- struct iscsi_conn *conn = iscsi_ptr(connh);
+ struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
struct sock *sk;
}
static void
-iscsi_conn_stop(iscsi_connh_t connh, int flag)
+iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
{
- struct iscsi_conn *conn = iscsi_ptr(connh);
+ struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
struct sock *sk;
unsigned long flags;
static struct iscsi_transport iscsi_tcp_transport;
-static struct Scsi_Host *
+static struct iscsi_cls_session *
iscsi_session_create(struct scsi_transport_template *scsit,
- uint32_t initial_cmdsn)
+ uint32_t initial_cmdsn, uint32_t *sid)
{
struct Scsi_Host *shost;
struct iscsi_session *session;
session = iscsi_hostdata(shost->hostdata);
memset(session, 0, sizeof(struct iscsi_session));
session->host = shost;
- session->state = ISCSI_STATE_LOGGED_IN;
+ session->state = ISCSI_STATE_FREE;
session->mgmtpool_max = ISCSI_MGMT_CMDS_MAX;
session->cmds_max = ISCSI_XMIT_CMDS_MAX;
session->cmdsn = initial_cmdsn;
session->exp_cmdsn = initial_cmdsn + 1;
session->max_cmdsn = initial_cmdsn + 1;
session->max_r2t = 1;
+ *sid = shost->host_no;
/* initialize SCSI PDU commands pool */
if (iscsi_pool_init(&session->cmdpool, session->cmds_max,
if (iscsi_r2tpool_alloc(session))
goto r2tpool_alloc_fail;
- return shost;
+ return hostdata_session(shost->hostdata);
r2tpool_alloc_fail:
for (cmd_i = 0; cmd_i < session->mgmtpool_max; cmd_i++)
kfree(session->mgmt_cmds[cmd_i]->data);
- iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds);
immdata_alloc_fail:
+ iscsi_pool_free(&session->mgmtpool, (void**)session->mgmt_cmds);
mgmtpool_alloc_fail:
iscsi_pool_free(&session->cmdpool, (void**)session->cmds);
cmdpool_alloc_fail:
+ iscsi_transport_destroy_session(shost);
return NULL;
}
static void
-iscsi_session_destroy(struct Scsi_Host *shost)
+iscsi_session_destroy(struct iscsi_cls_session *cls_session)
{
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
int cmd_i;
struct iscsi_data_task *dtask, *n;
}
static int
-iscsi_conn_set_param(iscsi_connh_t connh, enum iscsi_param param,
+iscsi_conn_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param,
uint32_t value)
{
- struct iscsi_conn *conn = iscsi_ptr(connh);
+ struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_session *session = conn->session;
spin_lock_bh(&session->lock);
}
static int
-iscsi_session_get_param(struct Scsi_Host *shost,
+iscsi_session_get_param(struct iscsi_cls_session *cls_session,
enum iscsi_param param, uint32_t *value)
{
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
switch(param) {
}
static int
-iscsi_conn_get_param(void *data, enum iscsi_param param, uint32_t *value)
+iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, uint32_t *value)
{
- struct iscsi_conn *conn = data;
+ struct iscsi_conn *conn = cls_conn->dd_data;
switch(param) {
case ISCSI_PARAM_MAX_RECV_DLENGTH:
}
static void
-iscsi_conn_get_stats(iscsi_connh_t connh, struct iscsi_stats *stats)
+iscsi_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats)
{
- struct iscsi_conn *conn = iscsi_ptr(connh);
+ struct iscsi_conn *conn = cls_conn->dd_data;
stats->txdata_octets = conn->txdata_octets;
stats->rxdata_octets = conn->rxdata_octets;
}
static int
-iscsi_conn_send_pdu(iscsi_connh_t connh, struct iscsi_hdr *hdr, char *data,
- uint32_t data_size)
+iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr,
+ char *data, uint32_t data_size)
{
- struct iscsi_conn *conn = iscsi_ptr(connh);
+ struct iscsi_conn *conn = cls_conn->dd_data;
int rc;
mutex_lock(&conn->xmitmutex);
int datadgst;
};
+struct iscsi_cls_conn;
+
struct iscsi_conn {
+ struct iscsi_cls_conn *cls_conn; /* ptr to class connection */
struct iscsi_hdr hdr; /* header placeholder */
char hdrext[4*sizeof(__u16) +
sizeof(__u32)];
struct iscsi_mgmt_task *login_mtask; /* mtask used for login/text */
struct iscsi_mgmt_task *mtask; /* xmit mtask in progress */
struct iscsi_cmd_task *ctask; /* xmit ctask in progress */
- spinlock_t lock; /* FIXME: to be removed */
/* old values for socket callbacks */
void (*old_data_ready)(struct sock *, int);
MODULE_DEVICE_TABLE(pci, megaraid_pci_tbl);
static struct pci_driver megaraid_pci_driver = {
- .name = "megaraid",
+ .name = "megaraid_legacy",
.id_table = megaraid_pci_tbl,
.probe = megaraid_probe_one,
.remove = __devexit_p(megaraid_remove_one),
#include <linux/mutex.h>
#define MEGARAID_VERSION \
- "v2.00.3 (Release Date: Wed Feb 19 08:51:30 EST 2003)\n"
+ "v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006)\n"
/*
* Driver features - change the values to enable or disable features in the
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.02.02
+ * Version : v00.00.02.04
*
* Authors:
* Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
PCI_ANY_ID,
PCI_ANY_ID,
},
+ {
+ PCI_VENDOR_ID_LSI_LOGIC,
+ PCI_DEVICE_ID_LSI_SAS1078R, // ppc IOP
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ },
{
PCI_VENDOR_ID_DELL,
PCI_DEVICE_ID_DELL_PERC5, // xscale IOP
* to xscale (deviceid : 1064R, PERC5) controllers
*/
+/**
+* The following functions are defined for ppc (deviceid : 0x60)
+* controllers
+*/
+
+/**
+ * megasas_enable_intr_ppc - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+ writel(~0x80000004, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_ppc - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_ppc - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) {
+ return 1;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_doorbell_clear);
+
+ return 0;
+}
+/**
+ * megasas_fire_cmd_ppc - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_ppc(dma_addr_t frame_phys_addr, u32 frame_count, struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_ppc = {
+
+ .fire_cmd = megasas_fire_cmd_ppc,
+ .enable_intr = megasas_enable_intr_ppc,
+ .clear_intr = megasas_clear_intr_ppc,
+ .read_fw_status_reg = megasas_read_fw_status_reg_ppc,
+};
+
+/**
+* This is the end of set of functions & definitions
+* specific to ppc (deviceid : 0x60) controllers
+*/
+
/**
* megasas_disable_intr - Disables interrupts
* @regs: MFI register set
reg_set = instance->reg_set;
- instance->instancet = &megasas_instance_template_xscale;
+ switch(instance->pdev->device)
+ {
+ case PCI_DEVICE_ID_LSI_SAS1078R:
+ instance->instancet = &megasas_instance_template_ppc;
+ break;
+ case PCI_DEVICE_ID_LSI_SAS1064R:
+ case PCI_DEVICE_ID_DELL_PERC5:
+ default:
+ instance->instancet = &megasas_instance_template_xscale;
+ break;
+ }
/*
* We expect the FW state to be READY
host->max_channel = MEGASAS_MAX_CHANNELS - 1;
host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
host->max_lun = MEGASAS_MAX_LUN;
+ host->max_cmd_len = 16;
/*
* Notify the mid-layer about the new controller
/**
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.02.02"
-#define MEGASAS_RELDATE "Jan 23, 2006"
-#define MEGASAS_EXT_VERSION "Mon Jan 23 14:09:01 PST 2006"
+#define MEGASAS_VERSION "00.00.02.04"
+#define MEGASAS_RELDATE "Feb 03, 2006"
+#define MEGASAS_EXT_VERSION "Fri Feb 03 14:31:44 PST 2006"
/*
* =====================================
* MegaRAID SAS MFI firmware definitions
#define MFI_OB_INTR_STATUS_MASK 0x00000002
#define MFI_POLL_TIMEOUT_SECS 10
+#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
+#define PCI_DEVICE_ID_LSI_SAS1078R 0x00000060
+
struct megasas_register_set {
+ u32 reserved_0[4]; /*0000h*/
- u32 reserved_0[4]; /*0000h */
+ u32 inbound_msg_0; /*0010h*/
+ u32 inbound_msg_1; /*0014h*/
+ u32 outbound_msg_0; /*0018h*/
+ u32 outbound_msg_1; /*001Ch*/
- u32 inbound_msg_0; /*0010h */
- u32 inbound_msg_1; /*0014h */
- u32 outbound_msg_0; /*0018h */
- u32 outbound_msg_1; /*001Ch */
+ u32 inbound_doorbell; /*0020h*/
+ u32 inbound_intr_status; /*0024h*/
+ u32 inbound_intr_mask; /*0028h*/
- u32 inbound_doorbell; /*0020h */
- u32 inbound_intr_status; /*0024h */
- u32 inbound_intr_mask; /*0028h */
+ u32 outbound_doorbell; /*002Ch*/
+ u32 outbound_intr_status; /*0030h*/
+ u32 outbound_intr_mask; /*0034h*/
- u32 outbound_doorbell; /*002Ch */
- u32 outbound_intr_status; /*0030h */
- u32 outbound_intr_mask; /*0034h */
+ u32 reserved_1[2]; /*0038h*/
- u32 reserved_1[2]; /*0038h */
+ u32 inbound_queue_port; /*0040h*/
+ u32 outbound_queue_port; /*0044h*/
- u32 inbound_queue_port; /*0040h */
- u32 outbound_queue_port; /*0044h */
+ u32 reserved_2[22]; /*0048h*/
- u32 reserved_2; /*004Ch */
+ u32 outbound_doorbell_clear; /*00A0h*/
- u32 index_registers[1004]; /*0050h */
+ u32 reserved_3[3]; /*00A4h*/
+
+ u32 outbound_scratch_pad ; /*00B0h*/
+
+ u32 reserved_4[3]; /*00B4h*/
+
+ u32 inbound_low_queue_port ; /*00C0h*/
+
+ u32 inbound_high_queue_port ; /*00C4h*/
+
+ u32 reserved_5; /*00C8h*/
+ u32 index_registers[820]; /*00CCh*/
} __attribute__ ((packed));
#include "qla_def.h"
#include <linux/vmalloc.h>
-#include <scsi/scsi_transport_fc.h>
/* SYSFS attributes --------------------------------------------------------- */
struct device, kobj)));
unsigned long flags;
- if (!capable(CAP_SYS_ADMIN) || off != 0 || count != ha->nvram_size)
+ if (!capable(CAP_SYS_ADMIN) || off != 0)
return 0;
/* Read NVRAM. */
ha->nvram_size);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- return (count);
+ return ha->nvram_size;
}
static ssize_t
.mode = S_IRUSR | S_IWUSR,
.owner = THIS_MODULE,
},
- .size = 0,
+ .size = 512,
.read = qla2x00_sysfs_read_nvram,
.write = qla2x00_sysfs_write_nvram,
};
+static ssize_t
+qla2x00_sysfs_read_optrom(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
+ struct device, kobj)));
+
+ if (ha->optrom_state != QLA_SREADING)
+ return 0;
+ if (off > ha->optrom_size)
+ return 0;
+ if (off + count > ha->optrom_size)
+ count = ha->optrom_size - off;
+
+ memcpy(buf, &ha->optrom_buffer[off], count);
+
+ return count;
+}
+
+static ssize_t
+qla2x00_sysfs_write_optrom(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
+ struct device, kobj)));
+
+ if (ha->optrom_state != QLA_SWRITING)
+ return -EINVAL;
+ if (off > ha->optrom_size)
+ return -ERANGE;
+ if (off + count > ha->optrom_size)
+ count = ha->optrom_size - off;
+
+ memcpy(&ha->optrom_buffer[off], buf, count);
+
+ return count;
+}
+
+static struct bin_attribute sysfs_optrom_attr = {
+ .attr = {
+ .name = "optrom",
+ .mode = S_IRUSR | S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = OPTROM_SIZE_24XX,
+ .read = qla2x00_sysfs_read_optrom,
+ .write = qla2x00_sysfs_write_optrom,
+};
+
+static ssize_t
+qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
+ struct device, kobj)));
+ int val;
+
+ if (off)
+ return 0;
+
+ if (sscanf(buf, "%d", &val) != 1)
+ return -EINVAL;
+
+ switch (val) {
+ case 0:
+ if (ha->optrom_state != QLA_SREADING &&
+ ha->optrom_state != QLA_SWRITING)
+ break;
+
+ ha->optrom_state = QLA_SWAITING;
+ vfree(ha->optrom_buffer);
+ ha->optrom_buffer = NULL;
+ break;
+ case 1:
+ if (ha->optrom_state != QLA_SWAITING)
+ break;
+
+ ha->optrom_state = QLA_SREADING;
+ ha->optrom_buffer = (uint8_t *)vmalloc(ha->optrom_size);
+ if (ha->optrom_buffer == NULL) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory for optrom retrieval "
+ "(%x).\n", ha->optrom_size);
+
+ ha->optrom_state = QLA_SWAITING;
+ return count;
+ }
+
+ memset(ha->optrom_buffer, 0, ha->optrom_size);
+ ha->isp_ops.read_optrom(ha, ha->optrom_buffer, 0,
+ ha->optrom_size);
+ break;
+ case 2:
+ if (ha->optrom_state != QLA_SWAITING)
+ break;
+
+ ha->optrom_state = QLA_SWRITING;
+ ha->optrom_buffer = (uint8_t *)vmalloc(ha->optrom_size);
+ if (ha->optrom_buffer == NULL) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory for optrom update "
+ "(%x).\n", ha->optrom_size);
+
+ ha->optrom_state = QLA_SWAITING;
+ return count;
+ }
+ memset(ha->optrom_buffer, 0, ha->optrom_size);
+ break;
+ case 3:
+ if (ha->optrom_state != QLA_SWRITING)
+ break;
+
+ ha->isp_ops.write_optrom(ha, ha->optrom_buffer, 0,
+ ha->optrom_size);
+ break;
+ }
+ return count;
+}
+
+static struct bin_attribute sysfs_optrom_ctl_attr = {
+ .attr = {
+ .name = "optrom_ctl",
+ .mode = S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = 0,
+ .write = qla2x00_sysfs_write_optrom_ctl,
+};
+
void
qla2x00_alloc_sysfs_attr(scsi_qla_host_t *ha)
{
struct Scsi_Host *host = ha->host;
sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr);
- sysfs_nvram_attr.size = ha->nvram_size;
sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr);
+ sysfs_create_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr);
+ sysfs_create_bin_file(&host->shost_gendev.kobj,
+ &sysfs_optrom_ctl_attr);
}
void
sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_fw_dump_attr);
sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_nvram_attr);
+ sysfs_remove_bin_file(&host->shost_gendev.kobj, &sysfs_optrom_attr);
+ sysfs_remove_bin_file(&host->shost_gendev.kobj,
+ &sysfs_optrom_ctl_attr);
+
+ if (ha->beacon_blink_led == 1)
+ ha->isp_ops.beacon_off(ha);
}
/* Scsi_Host attributes. */
return strlen(buf);
}
+static ssize_t
+qla2x00_beacon_show(struct class_device *cdev, char *buf)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ int len = 0;
+
+ if (ha->beacon_blink_led)
+ len += snprintf(buf + len, PAGE_SIZE-len, "Enabled\n");
+ else
+ len += snprintf(buf + len, PAGE_SIZE-len, "Disabled\n");
+ return len;
+}
+
+static ssize_t
+qla2x00_beacon_store(struct class_device *cdev, const char *buf,
+ size_t count)
+{
+ scsi_qla_host_t *ha = to_qla_host(class_to_shost(cdev));
+ int val = 0;
+ int rval;
+
+ if (IS_QLA2100(ha) || IS_QLA2200(ha))
+ return -EPERM;
+
+ if (test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) {
+ qla_printk(KERN_WARNING, ha,
+ "Abort ISP active -- ignoring beacon request.\n");
+ return -EBUSY;
+ }
+
+ if (sscanf(buf, "%d", &val) != 1)
+ return -EINVAL;
+
+ if (val)
+ rval = ha->isp_ops.beacon_on(ha);
+ else
+ rval = ha->isp_ops.beacon_off(ha);
+
+ if (rval != QLA_SUCCESS)
+ count = 0;
+
+ return count;
+}
+
static CLASS_DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show,
NULL);
static CLASS_DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
qla2x00_zio_store);
static CLASS_DEVICE_ATTR(zio_timer, S_IRUGO | S_IWUSR, qla2x00_zio_timer_show,
qla2x00_zio_timer_store);
+static CLASS_DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, qla2x00_beacon_show,
+ qla2x00_beacon_store);
struct class_device_attribute *qla2x00_host_attrs[] = {
&class_device_attr_driver_version,
&class_device_attr_state,
&class_device_attr_zio,
&class_device_attr_zio_timer,
+ &class_device_attr_beacon,
NULL,
};
ha->d_id.b.area << 8 | ha->d_id.b.al_pa;
}
+static void
+qla2x00_get_host_speed(struct Scsi_Host *shost)
+{
+ scsi_qla_host_t *ha = to_qla_host(shost);
+ uint32_t speed = 0;
+
+ switch (ha->link_data_rate) {
+ case LDR_1GB:
+ speed = 1;
+ break;
+ case LDR_2GB:
+ speed = 2;
+ break;
+ case LDR_4GB:
+ speed = 4;
+ break;
+ }
+ fc_host_speed(shost) = speed;
+}
+
+static void
+qla2x00_get_host_port_type(struct Scsi_Host *shost)
+{
+ scsi_qla_host_t *ha = to_qla_host(shost);
+ uint32_t port_type = FC_PORTTYPE_UNKNOWN;
+
+ switch (ha->current_topology) {
+ case ISP_CFG_NL:
+ port_type = FC_PORTTYPE_LPORT;
+ break;
+ case ISP_CFG_FL:
+ port_type = FC_PORTTYPE_NLPORT;
+ break;
+ case ISP_CFG_N:
+ port_type = FC_PORTTYPE_PTP;
+ break;
+ case ISP_CFG_F:
+ port_type = FC_PORTTYPE_NPORT;
+ break;
+ }
+ fc_host_port_type(shost) = port_type;
+}
+
static void
qla2x00_get_starget_node_name(struct scsi_target *starget)
{
return 0;
}
+static struct fc_host_statistics *
+qla2x00_get_fc_host_stats(struct Scsi_Host *shost)
+{
+ scsi_qla_host_t *ha = to_qla_host(shost);
+ int rval;
+ uint16_t mb_stat[1];
+ link_stat_t stat_buf;
+ struct fc_host_statistics *pfc_host_stat;
+
+ pfc_host_stat = &ha->fc_host_stat;
+ memset(pfc_host_stat, -1, sizeof(struct fc_host_statistics));
+
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ rval = qla24xx_get_isp_stats(ha, (uint32_t *)&stat_buf,
+ sizeof(stat_buf) / 4, mb_stat);
+ } else {
+ rval = qla2x00_get_link_status(ha, ha->loop_id, &stat_buf,
+ mb_stat);
+ }
+ if (rval != 0) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to retrieve host statistics (%d).\n", mb_stat[0]);
+ return pfc_host_stat;
+ }
+
+ pfc_host_stat->link_failure_count = stat_buf.link_fail_cnt;
+ pfc_host_stat->loss_of_sync_count = stat_buf.loss_sync_cnt;
+ pfc_host_stat->loss_of_signal_count = stat_buf.loss_sig_cnt;
+ pfc_host_stat->prim_seq_protocol_err_count = stat_buf.prim_seq_err_cnt;
+ pfc_host_stat->invalid_tx_word_count = stat_buf.inval_xmit_word_cnt;
+ pfc_host_stat->invalid_crc_count = stat_buf.inval_crc_cnt;
+
+ return pfc_host_stat;
+}
+
struct fc_function_template qla2xxx_transport_functions = {
.show_host_node_name = 1,
.get_host_port_id = qla2x00_get_host_port_id,
.show_host_port_id = 1,
+ .get_host_speed = qla2x00_get_host_speed,
+ .show_host_speed = 1,
+ .get_host_port_type = qla2x00_get_host_port_type,
+ .show_host_port_type = 1,
.dd_fcrport_size = sizeof(struct fc_port *),
.show_rport_supported_classes = 1,
.show_rport_dev_loss_tmo = 1,
.issue_fc_host_lip = qla2x00_issue_lip,
+ .get_fc_host_stats = qla2x00_get_fc_host_stats,
};
void
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_fc.h>
#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
#if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE)
#define WRT_REG_WORD(addr, data) writew(data,addr)
#define WRT_REG_DWORD(addr, data) writel(data,addr)
+/*
+ * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an
+ * 133Mhz slot.
+ */
+#define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr))
+#define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr))
+
/*
* Fibre Channel device definitions.
*/
#define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040
#define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080
#define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0
+#define GPIO_LED_ALL_OFF 0x0000
+#define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */
+#define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */
union {
struct {
void (*fw_dump) (struct scsi_qla_host *, int);
void (*ascii_fw_dump) (struct scsi_qla_host *);
+
+ int (*beacon_on) (struct scsi_qla_host *);
+ int (*beacon_off) (struct scsi_qla_host *);
+ void (*beacon_blink) (struct scsi_qla_host *);
+
+ uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *,
+ uint32_t, uint32_t);
+ int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t,
+ uint32_t);
};
/*
uint16_t min_external_loopid; /* First external loop Id */
uint16_t link_data_rate; /* F/W operating speed */
+#define LDR_1GB 0
+#define LDR_2GB 1
+#define LDR_4GB 3
+#define LDR_UNKNOWN 0xFFFF
uint8_t current_topology;
uint8_t prev_topology;
uint8_t *port_name;
uint32_t isp_abort_cnt;
+ /* Option ROM information. */
+ char *optrom_buffer;
+ uint32_t optrom_size;
+ int optrom_state;
+#define QLA_SWAITING 0
+#define QLA_SREADING 1
+#define QLA_SWRITING 2
+
/* Needed for BEACON */
uint16_t beacon_blink_led;
- uint16_t beacon_green_on;
+ uint8_t beacon_color_state;
+#define QLA_LED_GRN_ON 0x01
+#define QLA_LED_YLW_ON 0x02
+#define QLA_LED_ABR_ON 0x04
+#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */
+ /* ISP2322: red, green, amber. */
uint16_t zio_mode;
uint16_t zio_timer;
+ struct fc_host_statistics fc_host_stat;
} scsi_qla_host_t;
/*
* Flash support definitions
*/
-#define FLASH_IMAGE_SIZE 131072
+#define OPTROM_SIZE_2300 0x20000
+#define OPTROM_SIZE_2322 0x100000
+#define OPTROM_SIZE_24XX 0x100000
#include "qla_gbl.h"
#include "qla_dbg.h"
extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int);
extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int);
-extern void qla2x00_blink_led(scsi_qla_host_t *);
-
extern int qla2x00_down_timeout(struct semaphore *, unsigned long);
extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *);
+extern int qla2x00_wait_for_hba_online(scsi_qla_host_t *);
+
/*
* Global Function Prototypes in qla_iocb.c source file.
*/
extern int
qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map);
+extern int
+qla2x00_get_link_status(scsi_qla_host_t *, uint16_t, link_stat_t *,
+ uint16_t *);
+
+extern int
+qla24xx_get_isp_stats(scsi_qla_host_t *, uint32_t *, uint32_t, uint16_t *);
+
extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *);
extern int qla24xx_abort_target(fc_port_t *);
extern int qla24xx_write_nvram_data(scsi_qla_host_t *, uint8_t *, uint32_t,
uint32_t);
+extern int qla2x00_beacon_on(struct scsi_qla_host *);
+extern int qla2x00_beacon_off(struct scsi_qla_host *);
+extern void qla2x00_beacon_blink(struct scsi_qla_host *);
+extern int qla24xx_beacon_on(struct scsi_qla_host *);
+extern int qla24xx_beacon_off(struct scsi_qla_host *);
+extern void qla24xx_beacon_blink(struct scsi_qla_host *);
+
+extern uint8_t *qla2x00_read_optrom_data(struct scsi_qla_host *, uint8_t *,
+ uint32_t, uint32_t);
+extern int qla2x00_write_optrom_data(struct scsi_qla_host *, uint8_t *,
+ uint32_t, uint32_t);
+extern uint8_t *qla24xx_read_optrom_data(struct scsi_qla_host *, uint8_t *,
+ uint32_t, uint32_t);
+extern int qla24xx_write_optrom_data(struct scsi_qla_host *, uint8_t *,
+ uint32_t, uint32_t);
+
/*
* Global Function Prototypes in qla_dbg.c source file.
*/
#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <scsi/scsi_transport_fc.h>
#include "qla_devtbl.h"
cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain;
int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
+ host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* Load SCSI command packet. */
memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
break;
case MBA_LOOP_UP: /* Loop Up Event */
- ha->link_data_rate = 0;
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
link_speed = link_speeds[0];
+ ha->link_data_rate = LDR_1GB;
} else {
link_speed = link_speeds[LS_UNKNOWN];
if (mb[1] < 5)
}
ha->flags.management_server_logged_in = 0;
- ha->link_data_rate = 0;
+ ha->link_data_rate = LDR_UNKNOWN;
if (ql2xfdmienable)
set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
#include "qla_def.h"
#include <linux/delay.h>
-#include <scsi/scsi_transport_fc.h>
static void
qla2x00_mbx_sem_timeout(unsigned long data)
mcp->mb[3] = LSW(id_list_dma);
mcp->mb[6] = MSW(MSD(id_list_dma));
mcp->mb[7] = LSW(MSD(id_list_dma));
- mcp->out_mb |= MBX_7|MBX_6|MBX_3|MBX_2;
+ mcp->mb[8] = 0;
+ mcp->out_mb |= MBX_8|MBX_7|MBX_6|MBX_3|MBX_2;
} else {
mcp->mb[1] = MSW(id_list_dma);
mcp->mb[2] = LSW(id_list_dma);
return rval;
}
+#endif
+
+/*
+ * qla2x00_get_link_status
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * loop_id = device loop ID.
+ * ret_buf = pointer to link status return buffer.
+ *
+ * Returns:
+ * 0 = success.
+ * BIT_0 = mem alloc error.
+ * BIT_1 = mailbox error.
+ */
+int
+qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id,
+ link_stat_t *ret_buf, uint16_t *status)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ link_stat_t *stat_buf;
+ dma_addr_t stat_buf_dma;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+
+ stat_buf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &stat_buf_dma);
+ if (stat_buf == NULL) {
+ DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
+ __func__, ha->host_no));
+ return BIT_0;
+ }
+ memset(stat_buf, 0, sizeof(link_stat_t));
+
+ mcp->mb[0] = MBC_GET_LINK_STATUS;
+ mcp->mb[2] = MSW(stat_buf_dma);
+ mcp->mb[3] = LSW(stat_buf_dma);
+ mcp->mb[6] = MSW(MSD(stat_buf_dma));
+ mcp->mb[7] = LSW(MSD(stat_buf_dma));
+ mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
+ mcp->in_mb = MBX_0;
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ mcp->mb[1] = loop_id;
+ mcp->mb[4] = 0;
+ mcp->mb[10] = 0;
+ mcp->out_mb |= MBX_10|MBX_4|MBX_1;
+ mcp->in_mb |= MBX_1;
+ } else if (HAS_EXTENDED_IDS(ha)) {
+ mcp->mb[1] = loop_id;
+ mcp->mb[10] = 0;
+ mcp->out_mb |= MBX_10|MBX_1;
+ } else {
+ mcp->mb[1] = loop_id << 8;
+ mcp->out_mb |= MBX_1;
+ }
+ mcp->tov = 30;
+ mcp->flags = IOCTL_CMD;
+ rval = qla2x00_mailbox_command(ha, mcp);
+
+ if (rval == QLA_SUCCESS) {
+ if (mcp->mb[0] != MBS_COMMAND_COMPLETE) {
+ DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
+ __func__, ha->host_no, mcp->mb[0]);)
+ status[0] = mcp->mb[0];
+ rval = BIT_1;
+ } else {
+ /* copy over data -- firmware data is LE. */
+ ret_buf->link_fail_cnt =
+ le32_to_cpu(stat_buf->link_fail_cnt);
+ ret_buf->loss_sync_cnt =
+ le32_to_cpu(stat_buf->loss_sync_cnt);
+ ret_buf->loss_sig_cnt =
+ le32_to_cpu(stat_buf->loss_sig_cnt);
+ ret_buf->prim_seq_err_cnt =
+ le32_to_cpu(stat_buf->prim_seq_err_cnt);
+ ret_buf->inval_xmit_word_cnt =
+ le32_to_cpu(stat_buf->inval_xmit_word_cnt);
+ ret_buf->inval_crc_cnt =
+ le32_to_cpu(stat_buf->inval_crc_cnt);
+
+ DEBUG11(printk("%s(%ld): stat dump: fail_cnt=%d "
+ "loss_sync=%d loss_sig=%d seq_err=%d "
+ "inval_xmt_word=%d inval_crc=%d.\n", __func__,
+ ha->host_no, stat_buf->link_fail_cnt,
+ stat_buf->loss_sync_cnt, stat_buf->loss_sig_cnt,
+ stat_buf->prim_seq_err_cnt,
+ stat_buf->inval_xmit_word_cnt,
+ stat_buf->inval_crc_cnt);)
+ }
+ } else {
+ /* Failed. */
+ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
+ ha->host_no, rval);)
+ rval = BIT_1;
+ }
+
+ dma_pool_free(ha->s_dma_pool, stat_buf, stat_buf_dma);
-uint8_t
+ return rval;
+}
+
+int
qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords,
uint16_t *status)
{
return rval;
}
-#endif
int
qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)
goto qc_fail_command;
}
+ /* Close window on fcport/rport state-transitioning. */
+ if (!*(fc_port_t **)rport->dd_data) {
+ cmd->result = DID_IMM_RETRY << 16;
+ goto qc_fail_command;
+ }
+
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&ha->loop_state) == LOOP_DEAD) {
goto qc24_fail_command;
}
+ /* Close window on fcport/rport state-transitioning. */
+ if (!*(fc_port_t **)rport->dd_data) {
+ cmd->result = DID_IMM_RETRY << 16;
+ goto qc24_fail_command;
+ }
+
if (atomic_read(&fcport->state) != FCS_ONLINE) {
if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
atomic_read(&ha->loop_state) == LOOP_DEAD) {
* Success (Adapter is online) : 0
* Failed (Adapter is offline/disabled) : 1
*/
-static int
+int
qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
{
int return_status;
ha->ports = MAX_BUSES;
ha->init_cb_size = sizeof(init_cb_t);
ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
+ ha->link_data_rate = LDR_UNKNOWN;
+ ha->optrom_size = OPTROM_SIZE_2300;
/* Assign ISP specific operations. */
ha->isp_ops.pci_config = qla2100_pci_config;
ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
ha->isp_ops.fw_dump = qla2100_fw_dump;
ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump;
+ ha->isp_ops.read_optrom = qla2x00_read_optrom_data;
+ ha->isp_ops.write_optrom = qla2x00_write_optrom_data;
if (IS_QLA2100(ha)) {
host->max_id = MAX_TARGETS_2100;
ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
ha->isp_ops.intr_handler = qla2300_intr_handler;
ha->isp_ops.fw_dump = qla2300_fw_dump;
ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump;
+ ha->isp_ops.beacon_on = qla2x00_beacon_on;
+ ha->isp_ops.beacon_off = qla2x00_beacon_off;
+ ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
ha->gid_list_info_size = 6;
+ if (IS_QLA2322(ha) || IS_QLA6322(ha))
+ ha->optrom_size = OPTROM_SIZE_2322;
} else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
host->max_id = MAX_TARGETS_2200;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
ha->isp_ops.fw_dump = qla24xx_fw_dump;
ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump;
+ ha->isp_ops.read_optrom = qla24xx_read_optrom_data;
+ ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
+ ha->isp_ops.beacon_on = qla24xx_beacon_on;
+ ha->isp_ops.beacon_off = qla24xx_beacon_off;
+ ha->isp_ops.beacon_blink = qla24xx_beacon_blink;
ha->gid_list_info_size = 8;
+ ha->optrom_size = OPTROM_SIZE_24XX;
}
host->can_queue = ha->request_q_length + 128;
spin_lock_irqsave(&fcport->rport_lock, flags);
fcport->drport = rport;
fcport->rport = NULL;
+ *(fc_port_t **)rport->dd_data = NULL;
spin_unlock_irqrestore(&fcport->rport_lock, flags);
set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
} else {
spin_lock_irqsave(&fcport->rport_lock, flags);
fcport->rport = NULL;
+ *(fc_port_t **)rport->dd_data = NULL;
spin_unlock_irqrestore(&fcport->rport_lock, flags);
fc_remote_port_delete(rport);
}
ha->fw_dumped = 0;
ha->fw_dump_reading = 0;
ha->fw_dump_buffer = NULL;
+
+ vfree(ha->optrom_buffer);
}
/*
if (!ha->interrupts_on)
ha->isp_ops.enable_intrs(ha);
+ if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags))
+ ha->isp_ops.beacon_blink(ha);
+
ha->dpc_active = 0;
} /* End of while(1) */
atomic_read(&ha->loop_down_timer)));
}
+ /* Check if beacon LED needs to be blinked */
+ if (ha->beacon_blink_led == 1) {
+ set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags);
+ start_dpc++;
+ }
+
/* Schedule the DPC routine if needed */
if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
start_dpc ||
test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
+ test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
ha->dpc_wait && !ha->dpc_active) {
*/
#include "qla_def.h"
-#include <scsi/scsi_transport_fc.h>
-
/**
* IO descriptor handle definitions.
*
return ret;
}
+
+
+static inline void
+qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
+{
+ if (IS_QLA2322(ha)) {
+ /* Flip all colors. */
+ if (ha->beacon_color_state == QLA_LED_ALL_ON) {
+ /* Turn off. */
+ ha->beacon_color_state = 0;
+ *pflags = GPIO_LED_ALL_OFF;
+ } else {
+ /* Turn on. */
+ ha->beacon_color_state = QLA_LED_ALL_ON;
+ *pflags = GPIO_LED_RGA_ON;
+ }
+ } else {
+ /* Flip green led only. */
+ if (ha->beacon_color_state == QLA_LED_GRN_ON) {
+ /* Turn off. */
+ ha->beacon_color_state = 0;
+ *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
+ } else {
+ /* Turn on. */
+ ha->beacon_color_state = QLA_LED_GRN_ON;
+ *pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
+ }
+ }
+}
+
+void
+qla2x00_beacon_blink(struct scsi_qla_host *ha)
+{
+ uint16_t gpio_enable;
+ uint16_t gpio_data;
+ uint16_t led_color = 0;
+ unsigned long flags;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ if (ha->pio_address)
+ reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ /* Save the Original GPIOE. */
+ if (ha->pio_address) {
+ gpio_enable = RD_REG_WORD_PIO(®->gpioe);
+ gpio_data = RD_REG_WORD_PIO(®->gpiod);
+ } else {
+ gpio_enable = RD_REG_WORD(®->gpioe);
+ gpio_data = RD_REG_WORD(®->gpiod);
+ }
+
+ /* Set the modified gpio_enable values */
+ gpio_enable |= GPIO_LED_MASK;
+
+ if (ha->pio_address) {
+ WRT_REG_WORD_PIO(®->gpioe, gpio_enable);
+ } else {
+ WRT_REG_WORD(®->gpioe, gpio_enable);
+ RD_REG_WORD(®->gpioe);
+ }
+
+ qla2x00_flip_colors(ha, &led_color);
+
+ /* Clear out any previously set LED color. */
+ gpio_data &= ~GPIO_LED_MASK;
+
+ /* Set the new input LED color to GPIOD. */
+ gpio_data |= led_color;
+
+ /* Set the modified gpio_data values */
+ if (ha->pio_address) {
+ WRT_REG_WORD_PIO(®->gpiod, gpio_data);
+ } else {
+ WRT_REG_WORD(®->gpiod, gpio_data);
+ RD_REG_WORD(®->gpiod);
+ }
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+int
+qla2x00_beacon_on(struct scsi_qla_host *ha)
+{
+ uint16_t gpio_enable;
+ uint16_t gpio_data;
+ unsigned long flags;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
+ ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
+
+ if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to update fw options (beacon on).\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ if (ha->pio_address)
+ reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
+
+ /* Turn off LEDs. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ if (ha->pio_address) {
+ gpio_enable = RD_REG_WORD_PIO(®->gpioe);
+ gpio_data = RD_REG_WORD_PIO(®->gpiod);
+ } else {
+ gpio_enable = RD_REG_WORD(®->gpioe);
+ gpio_data = RD_REG_WORD(®->gpiod);
+ }
+ gpio_enable |= GPIO_LED_MASK;
+
+ /* Set the modified gpio_enable values. */
+ if (ha->pio_address) {
+ WRT_REG_WORD_PIO(®->gpioe, gpio_enable);
+ } else {
+ WRT_REG_WORD(®->gpioe, gpio_enable);
+ RD_REG_WORD(®->gpioe);
+ }
+
+ /* Clear out previously set LED colour. */
+ gpio_data &= ~GPIO_LED_MASK;
+ if (ha->pio_address) {
+ WRT_REG_WORD_PIO(®->gpiod, gpio_data);
+ } else {
+ WRT_REG_WORD(®->gpiod, gpio_data);
+ RD_REG_WORD(®->gpiod);
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /*
+ * Let the per HBA timer kick off the blinking process based on
+ * the following flags. No need to do anything else now.
+ */
+ ha->beacon_blink_led = 1;
+ ha->beacon_color_state = 0;
+
+ return QLA_SUCCESS;
+}
+
+int
+qla2x00_beacon_off(struct scsi_qla_host *ha)
+{
+ int rval = QLA_SUCCESS;
+
+ ha->beacon_blink_led = 0;
+
+ /* Set the on flag so when it gets flipped it will be off. */
+ if (IS_QLA2322(ha))
+ ha->beacon_color_state = QLA_LED_ALL_ON;
+ else
+ ha->beacon_color_state = QLA_LED_GRN_ON;
+
+ ha->isp_ops.beacon_blink(ha); /* This turns green LED off */
+
+ ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
+ ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
+
+ rval = qla2x00_set_fw_options(ha, ha->fw_options);
+ if (rval != QLA_SUCCESS)
+ qla_printk(KERN_WARNING, ha,
+ "Unable to update fw options (beacon off).\n");
+ return rval;
+}
+
+
+static inline void
+qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
+{
+ /* Flip all colors. */
+ if (ha->beacon_color_state == QLA_LED_ALL_ON) {
+ /* Turn off. */
+ ha->beacon_color_state = 0;
+ *pflags = 0;
+ } else {
+ /* Turn on. */
+ ha->beacon_color_state = QLA_LED_ALL_ON;
+ *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
+ }
+}
+
+void
+qla24xx_beacon_blink(struct scsi_qla_host *ha)
+{
+ uint16_t led_color = 0;
+ uint32_t gpio_data;
+ unsigned long flags;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+
+ /* Save the Original GPIOD. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ gpio_data = RD_REG_DWORD(®->gpiod);
+
+ /* Enable the gpio_data reg for update. */
+ gpio_data |= GPDX_LED_UPDATE_MASK;
+
+ WRT_REG_DWORD(®->gpiod, gpio_data);
+ gpio_data = RD_REG_DWORD(®->gpiod);
+
+ /* Set the color bits. */
+ qla24xx_flip_colors(ha, &led_color);
+
+ /* Clear out any previously set LED color. */
+ gpio_data &= ~GPDX_LED_COLOR_MASK;
+
+ /* Set the new input LED color to GPIOD. */
+ gpio_data |= led_color;
+
+ /* Set the modified gpio_data values. */
+ WRT_REG_DWORD(®->gpiod, gpio_data);
+ gpio_data = RD_REG_DWORD(®->gpiod);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+int
+qla24xx_beacon_on(struct scsi_qla_host *ha)
+{
+ uint32_t gpio_data;
+ unsigned long flags;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+
+ if (ha->beacon_blink_led == 0) {
+ /* Enable firmware for update */
+ ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
+
+ if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS)
+ return QLA_FUNCTION_FAILED;
+
+ if (qla2x00_get_fw_options(ha, ha->fw_options) !=
+ QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to update fw options (beacon on).\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ gpio_data = RD_REG_DWORD(®->gpiod);
+
+ /* Enable the gpio_data reg for update. */
+ gpio_data |= GPDX_LED_UPDATE_MASK;
+ WRT_REG_DWORD(®->gpiod, gpio_data);
+ RD_REG_DWORD(®->gpiod);
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ }
+
+ /* So all colors blink together. */
+ ha->beacon_color_state = 0;
+
+ /* Let the per HBA timer kick off the blinking process. */
+ ha->beacon_blink_led = 1;
+
+ return QLA_SUCCESS;
+}
+
+int
+qla24xx_beacon_off(struct scsi_qla_host *ha)
+{
+ uint32_t gpio_data;
+ unsigned long flags;
+ struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
+
+ ha->beacon_blink_led = 0;
+ ha->beacon_color_state = QLA_LED_ALL_ON;
+
+ ha->isp_ops.beacon_blink(ha); /* Will flip to all off. */
+
+ /* Give control back to firmware. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ gpio_data = RD_REG_DWORD(®->gpiod);
+
+ /* Disable the gpio_data reg for update. */
+ gpio_data &= ~GPDX_LED_UPDATE_MASK;
+ WRT_REG_DWORD(®->gpiod, gpio_data);
+ RD_REG_DWORD(®->gpiod);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
+
+ if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to update fw options (beacon off).\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to get fw options (beacon off).\n");
+ return QLA_FUNCTION_FAILED;
+ }
+
+ return QLA_SUCCESS;
+}
+
+
+/*
+ * Flash support routines
+ */
+
+/**
+ * qla2x00_flash_enable() - Setup flash for reading and writing.
+ * @ha: HA context
+ */
+static void
+qla2x00_flash_enable(scsi_qla_host_t *ha)
+{
+ uint16_t data;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ data = RD_REG_WORD(®->ctrl_status);
+ data |= CSR_FLASH_ENABLE;
+ WRT_REG_WORD(®->ctrl_status, data);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+}
+
+/**
+ * qla2x00_flash_disable() - Disable flash and allow RISC to run.
+ * @ha: HA context
+ */
+static void
+qla2x00_flash_disable(scsi_qla_host_t *ha)
+{
+ uint16_t data;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ data = RD_REG_WORD(®->ctrl_status);
+ data &= ~(CSR_FLASH_ENABLE);
+ WRT_REG_WORD(®->ctrl_status, data);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+}
+
+/**
+ * qla2x00_read_flash_byte() - Reads a byte from flash
+ * @ha: HA context
+ * @addr: Address in flash to read
+ *
+ * A word is read from the chip, but, only the lower byte is valid.
+ *
+ * Returns the byte read from flash @addr.
+ */
+static uint8_t
+qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr)
+{
+ uint16_t data;
+ uint16_t bank_select;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ bank_select = RD_REG_WORD(®->ctrl_status);
+
+ if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+ /* Specify 64K address range: */
+ /* clear out Module Select and Flash Address bits [19:16]. */
+ bank_select &= ~0xf8;
+ bank_select |= addr >> 12 & 0xf0;
+ bank_select |= CSR_FLASH_64K_BANK;
+ WRT_REG_WORD(®->ctrl_status, bank_select);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+
+ WRT_REG_WORD(®->flash_address, (uint16_t)addr);
+ data = RD_REG_WORD(®->flash_data);
+
+ return (uint8_t)data;
+ }
+
+ /* Setup bit 16 of flash address. */
+ if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
+ bank_select |= CSR_FLASH_64K_BANK;
+ WRT_REG_WORD(®->ctrl_status, bank_select);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+ } else if (((addr & BIT_16) == 0) &&
+ (bank_select & CSR_FLASH_64K_BANK)) {
+ bank_select &= ~(CSR_FLASH_64K_BANK);
+ WRT_REG_WORD(®->ctrl_status, bank_select);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+ }
+
+ /* Always perform IO mapped accesses to the FLASH registers. */
+ if (ha->pio_address) {
+ uint16_t data2;
+
+ reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
+ WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr);
+ do {
+ data = RD_REG_WORD_PIO(®->flash_data);
+ barrier();
+ cpu_relax();
+ data2 = RD_REG_WORD_PIO(®->flash_data);
+ } while (data != data2);
+ } else {
+ WRT_REG_WORD(®->flash_address, (uint16_t)addr);
+ data = qla2x00_debounce_register(®->flash_data);
+ }
+
+ return (uint8_t)data;
+}
+
+/**
+ * qla2x00_write_flash_byte() - Write a byte to flash
+ * @ha: HA context
+ * @addr: Address in flash to write
+ * @data: Data to write
+ */
+static void
+qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data)
+{
+ uint16_t bank_select;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ bank_select = RD_REG_WORD(®->ctrl_status);
+ if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+ /* Specify 64K address range: */
+ /* clear out Module Select and Flash Address bits [19:16]. */
+ bank_select &= ~0xf8;
+ bank_select |= addr >> 12 & 0xf0;
+ bank_select |= CSR_FLASH_64K_BANK;
+ WRT_REG_WORD(®->ctrl_status, bank_select);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+
+ WRT_REG_WORD(®->flash_address, (uint16_t)addr);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+ WRT_REG_WORD(®->flash_data, (uint16_t)data);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+
+ return;
+ }
+
+ /* Setup bit 16 of flash address. */
+ if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
+ bank_select |= CSR_FLASH_64K_BANK;
+ WRT_REG_WORD(®->ctrl_status, bank_select);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+ } else if (((addr & BIT_16) == 0) &&
+ (bank_select & CSR_FLASH_64K_BANK)) {
+ bank_select &= ~(CSR_FLASH_64K_BANK);
+ WRT_REG_WORD(®->ctrl_status, bank_select);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+ }
+
+ /* Always perform IO mapped accesses to the FLASH registers. */
+ if (ha->pio_address) {
+ reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
+ WRT_REG_WORD_PIO(®->flash_address, (uint16_t)addr);
+ WRT_REG_WORD_PIO(®->flash_data, (uint16_t)data);
+ } else {
+ WRT_REG_WORD(®->flash_address, (uint16_t)addr);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+ WRT_REG_WORD(®->flash_data, (uint16_t)data);
+ RD_REG_WORD(®->ctrl_status); /* PCI Posting. */
+ }
+}
+
+/**
+ * qla2x00_poll_flash() - Polls flash for completion.
+ * @ha: HA context
+ * @addr: Address in flash to poll
+ * @poll_data: Data to be polled
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * This function polls the device until bit 7 of what is read matches data
+ * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed
+ * out (a fatal error). The flash book recommeds reading bit 7 again after
+ * reading bit 5 as a 1.
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
+ uint8_t man_id, uint8_t flash_id)
+{
+ int status;
+ uint8_t flash_data;
+ uint32_t cnt;
+
+ status = 1;
+
+ /* Wait for 30 seconds for command to finish. */
+ poll_data &= BIT_7;
+ for (cnt = 3000000; cnt; cnt--) {
+ flash_data = qla2x00_read_flash_byte(ha, addr);
+ if ((flash_data & BIT_7) == poll_data) {
+ status = 0;
+ break;
+ }
+
+ if (man_id != 0x40 && man_id != 0xda) {
+ if ((flash_data & BIT_5) && cnt > 2)
+ cnt = 2;
+ }
+ udelay(10);
+ barrier();
+ }
+ return status;
+}
+
+#define IS_OEM_001(ha) \
+ ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322 && \
+ (ha)->pdev->subsystem_vendor == 0x1028 && \
+ (ha)->pdev->subsystem_device == 0x0170)
+
+/**
+ * qla2x00_program_flash_address() - Programs a flash address
+ * @ha: HA context
+ * @addr: Address in flash to program
+ * @data: Data to be written in flash
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data,
+ uint8_t man_id, uint8_t flash_id)
+{
+ /* Write Program Command Sequence. */
+ if (IS_OEM_001(ha)) {
+ qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x555, 0x55);
+ qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
+ qla2x00_write_flash_byte(ha, addr, data);
+ } else {
+ if (man_id == 0xda && flash_id == 0xc1) {
+ qla2x00_write_flash_byte(ha, addr, data);
+ if (addr & 0x7e)
+ return 0;
+ } else {
+ qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+ qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
+ qla2x00_write_flash_byte(ha, addr, data);
+ }
+ }
+
+ udelay(150);
+
+ /* Wait for write to complete. */
+ return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
+}
+
+/**
+ * qla2x00_erase_flash() - Erase the flash.
+ * @ha: HA context
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id)
+{
+ /* Individual Sector Erase Command Sequence */
+ if (IS_OEM_001(ha)) {
+ qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x555, 0x55);
+ qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
+ qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x555, 0x55);
+ qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
+ } else {
+ qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+ qla2x00_write_flash_byte(ha, 0x5555, 0x80);
+ qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+ qla2x00_write_flash_byte(ha, 0x5555, 0x10);
+ }
+
+ udelay(150);
+
+ /* Wait for erase to complete. */
+ return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
+}
+
+/**
+ * qla2x00_erase_flash_sector() - Erase a flash sector.
+ * @ha: HA context
+ * @addr: Flash sector to erase
+ * @sec_mask: Sector address mask
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ *
+ * Returns 0 on success, else non-zero.
+ */
+static int
+qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr,
+ uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
+{
+ /* Individual Sector Erase Command Sequence */
+ qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+ qla2x00_write_flash_byte(ha, 0x5555, 0x80);
+ qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+ if (man_id == 0x1f && flash_id == 0x13)
+ qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
+ else
+ qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
+
+ udelay(150);
+
+ /* Wait for erase to complete. */
+ return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
+}
+
+/**
+ * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
+ * @man_id: Flash manufacturer ID
+ * @flash_id: Flash ID
+ */
+static void
+qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
+ uint8_t *flash_id)
+{
+ qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+ qla2x00_write_flash_byte(ha, 0x5555, 0x90);
+ *man_id = qla2x00_read_flash_byte(ha, 0x0000);
+ *flash_id = qla2x00_read_flash_byte(ha, 0x0001);
+ qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
+ qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
+}
+
+
+static inline void
+qla2x00_suspend_hba(struct scsi_qla_host *ha)
+{
+ int cnt;
+ unsigned long flags;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ /* Suspend HBA. */
+ scsi_block_requests(ha->host);
+ ha->isp_ops.disable_intrs(ha);
+ set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+
+ /* Pause RISC. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ WRT_REG_WORD(®->hccr, HCCR_PAUSE_RISC);
+ RD_REG_WORD(®->hccr);
+ if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_WORD(®->hccr) & HCCR_RISC_PAUSE) != 0)
+ break;
+ udelay(100);
+ }
+ } else {
+ udelay(10);
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+static inline void
+qla2x00_resume_hba(struct scsi_qla_host *ha)
+{
+ /* Resume HBA. */
+ clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ up(ha->dpc_wait);
+ qla2x00_wait_for_hba_online(ha);
+ scsi_unblock_requests(ha->host);
+}
+
+uint8_t *
+qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+ uint32_t offset, uint32_t length)
+{
+ unsigned long flags;
+ uint32_t addr, midpoint;
+ uint8_t *data;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ /* Suspend HBA. */
+ qla2x00_suspend_hba(ha);
+
+ /* Go with read. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ midpoint = ha->optrom_size / 2;
+
+ qla2x00_flash_enable(ha);
+ WRT_REG_WORD(®->nvram, 0);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ for (addr = offset, data = buf; addr < length; addr++, data++) {
+ if (addr == midpoint) {
+ WRT_REG_WORD(®->nvram, NVR_SELECT);
+ RD_REG_WORD(®->nvram); /* PCI Posting. */
+ }
+
+ *data = qla2x00_read_flash_byte(ha, addr);
+ }
+ qla2x00_flash_disable(ha);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Resume HBA. */
+ qla2x00_resume_hba(ha);
+
+ return buf;
+}
+
+int
+qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+ uint32_t offset, uint32_t length)
+{
+
+ int rval;
+ unsigned long flags;
+ uint8_t man_id, flash_id, sec_number, data;
+ uint16_t wd;
+ uint32_t addr, liter, sec_mask, rest_addr;
+ struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+
+ /* Suspend HBA. */
+ qla2x00_suspend_hba(ha);
+
+ rval = QLA_SUCCESS;
+ sec_number = 0;
+
+ /* Reset ISP chip. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ WRT_REG_WORD(®->ctrl_status, CSR_ISP_SOFT_RESET);
+ pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
+
+ /* Go with write. */
+ qla2x00_flash_enable(ha);
+ do { /* Loop once to provide quick error exit */
+ /* Structure of flash memory based on manufacturer */
+ if (IS_OEM_001(ha)) {
+ /* OEM variant with special flash part. */
+ man_id = flash_id = 0;
+ rest_addr = 0xffff;
+ sec_mask = 0x10000;
+ goto update_flash;
+ }
+ qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
+ switch (man_id) {
+ case 0x20: /* ST flash. */
+ if (flash_id == 0xd2 || flash_id == 0xe3) {
+ /*
+ * ST m29w008at part - 64kb sector size with
+ * 32kb,8kb,8kb,16kb sectors at memory address
+ * 0xf0000.
+ */
+ rest_addr = 0xffff;
+ sec_mask = 0x10000;
+ break;
+ }
+ /*
+ * ST m29w010b part - 16kb sector size
+ * Default to 16kb sectors
+ */
+ rest_addr = 0x3fff;
+ sec_mask = 0x1c000;
+ break;
+ case 0x40: /* Mostel flash. */
+ /* Mostel v29c51001 part - 512 byte sector size. */
+ rest_addr = 0x1ff;
+ sec_mask = 0x1fe00;
+ break;
+ case 0xbf: /* SST flash. */
+ /* SST39sf10 part - 4kb sector size. */
+ rest_addr = 0xfff;
+ sec_mask = 0x1f000;
+ break;
+ case 0xda: /* Winbond flash. */
+ /* Winbond W29EE011 part - 256 byte sector size. */
+ rest_addr = 0x7f;
+ sec_mask = 0x1ff80;
+ break;
+ case 0xc2: /* Macronix flash. */
+ /* 64k sector size. */
+ if (flash_id == 0x38 || flash_id == 0x4f) {
+ rest_addr = 0xffff;
+ sec_mask = 0x10000;
+ break;
+ }
+ /* Fall through... */
+
+ case 0x1f: /* Atmel flash. */
+ /* 512k sector size. */
+ if (flash_id == 0x13) {
+ rest_addr = 0x7fffffff;
+ sec_mask = 0x80000000;
+ break;
+ }
+ /* Fall through... */
+
+ case 0x01: /* AMD flash. */
+ if (flash_id == 0x38 || flash_id == 0x40 ||
+ flash_id == 0x4f) {
+ /* Am29LV081 part - 64kb sector size. */
+ /* Am29LV002BT part - 64kb sector size. */
+ rest_addr = 0xffff;
+ sec_mask = 0x10000;
+ break;
+ } else if (flash_id == 0x3e) {
+ /*
+ * Am29LV008b part - 64kb sector size with
+ * 32kb,8kb,8kb,16kb sector at memory address
+ * h0xf0000.
+ */
+ rest_addr = 0xffff;
+ sec_mask = 0x10000;
+ break;
+ } else if (flash_id == 0x20 || flash_id == 0x6e) {
+ /*
+ * Am29LV010 part or AM29f010 - 16kb sector
+ * size.
+ */
+ rest_addr = 0x3fff;
+ sec_mask = 0x1c000;
+ break;
+ } else if (flash_id == 0x6d) {
+ /* Am29LV001 part - 8kb sector size. */
+ rest_addr = 0x1fff;
+ sec_mask = 0x1e000;
+ break;
+ }
+ default:
+ /* Default to 16 kb sector size. */
+ rest_addr = 0x3fff;
+ sec_mask = 0x1c000;
+ break;
+ }
+
+update_flash:
+ if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+ if (qla2x00_erase_flash(ha, man_id, flash_id)) {
+ rval = QLA_FUNCTION_FAILED;
+ break;
+ }
+ }
+
+ for (addr = offset, liter = 0; liter < length; liter++,
+ addr++) {
+ data = buf[liter];
+ /* Are we at the beginning of a sector? */
+ if ((addr & rest_addr) == 0) {
+ if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
+ if (addr >= 0x10000UL) {
+ if (((addr >> 12) & 0xf0) &&
+ ((man_id == 0x01 &&
+ flash_id == 0x3e) ||
+ (man_id == 0x20 &&
+ flash_id == 0xd2))) {
+ sec_number++;
+ if (sec_number == 1) {
+ rest_addr =
+ 0x7fff;
+ sec_mask =
+ 0x18000;
+ } else if (
+ sec_number == 2 ||
+ sec_number == 3) {
+ rest_addr =
+ 0x1fff;
+ sec_mask =
+ 0x1e000;
+ } else if (
+ sec_number == 4) {
+ rest_addr =
+ 0x3fff;
+ sec_mask =
+ 0x1c000;
+ }
+ }
+ }
+ } else if (addr == ha->optrom_size / 2) {
+ WRT_REG_WORD(®->nvram, NVR_SELECT);
+ RD_REG_WORD(®->nvram);
+ }
+
+ if (flash_id == 0xda && man_id == 0xc1) {
+ qla2x00_write_flash_byte(ha, 0x5555,
+ 0xaa);
+ qla2x00_write_flash_byte(ha, 0x2aaa,
+ 0x55);
+ qla2x00_write_flash_byte(ha, 0x5555,
+ 0xa0);
+ } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
+ /* Then erase it */
+ if (qla2x00_erase_flash_sector(ha,
+ addr, sec_mask, man_id,
+ flash_id)) {
+ rval = QLA_FUNCTION_FAILED;
+ break;
+ }
+ if (man_id == 0x01 && flash_id == 0x6d)
+ sec_number++;
+ }
+ }
+
+ if (man_id == 0x01 && flash_id == 0x6d) {
+ if (sec_number == 1 &&
+ addr == (rest_addr - 1)) {
+ rest_addr = 0x0fff;
+ sec_mask = 0x1f000;
+ } else if (sec_number == 3 && (addr & 0x7ffe)) {
+ rest_addr = 0x3fff;
+ sec_mask = 0x1c000;
+ }
+ }
+
+ if (qla2x00_program_flash_address(ha, addr, data,
+ man_id, flash_id)) {
+ rval = QLA_FUNCTION_FAILED;
+ break;
+ }
+ }
+ } while (0);
+ qla2x00_flash_disable(ha);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Resume HBA. */
+ qla2x00_resume_hba(ha);
+
+ return rval;
+}
+
+uint8_t *
+qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+ uint32_t offset, uint32_t length)
+{
+ /* Suspend HBA. */
+ scsi_block_requests(ha->host);
+ ha->isp_ops.disable_intrs(ha);
+ set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+
+ /* Go with read. */
+ qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2);
+
+ /* Resume HBA. */
+ clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+ ha->isp_ops.enable_intrs(ha);
+ scsi_unblock_requests(ha->host);
+
+ return buf;
+}
+
+int
+qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
+ uint32_t offset, uint32_t length)
+{
+ int rval;
+
+ /* Suspend HBA. */
+ scsi_block_requests(ha->host);
+ ha->isp_ops.disable_intrs(ha);
+ set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+
+ /* Go with write. */
+ rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2,
+ length >> 2);
+
+ /* Resume HBA -- RISC reset needed. */
+ clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
+ set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
+ up(ha->dpc_wait);
+ qla2x00_wait_for_hba_online(ha);
+ scsi_unblock_requests(ha->host);
+
+ return rval;
+}
.reset_bus = mv_reset_pci_bus,
};
+/*
+ * module options
+ */
+static int msi; /* Use PCI msi; either zero (off, default) or non-zero */
+
+
/*
* Functions
*/
}
/* Enable interrupts */
- if (pci_enable_msi(pdev) == 0) {
+ if (msi && pci_enable_msi(pdev) == 0) {
hpriv->hp_flags |= MV_HP_FLAG_MSI;
} else {
pci_intx(pdev, 1);
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+module_param(msi, int, 0444);
+MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+
module_init(mv_init);
module_exit(mv_exit);
MODULE_DEVICE_TABLE(pci, sil_pci_tbl);
MODULE_VERSION(DRV_VERSION);
+static int slow_down = 0;
+module_param(slow_down, int, 0444);
+MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)");
+
static unsigned char sil_get_device_cache_line(struct pci_dev *pdev)
{
}
/* limit requests to 15 sectors */
- if ((ap->flags & SIL_FLAG_MOD15WRITE) && (quirks & SIL_QUIRK_MOD15WRITE)) {
- printk(KERN_INFO "ata%u(%u): applying Seagate errata fix\n",
+ if (slow_down ||
+ ((ap->flags & SIL_FLAG_MOD15WRITE) &&
+ (quirks & SIL_QUIRK_MOD15WRITE))) {
+ printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n",
ap->id, dev->devno);
ap->host->max_sectors = 15;
ap->host->hostt->max_sectors = 15;
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <scsi/scsi.h>
#include <scsi/scsi_dbg.h>
device_for_each_child(dev, NULL, target_unblock);
}
EXPORT_SYMBOL_GPL(scsi_target_unblock);
+
+
+struct work_queue_work {
+ struct work_struct work;
+ void (*fn)(void *);
+ void *data;
+};
+
+static void execute_in_process_context_work(void *data)
+{
+ void (*fn)(void *data);
+ struct work_queue_work *wqw = data;
+
+ fn = wqw->fn;
+ data = wqw->data;
+
+ kfree(wqw);
+
+ fn(data);
+}
+
+/**
+ * scsi_execute_in_process_context - reliably execute the routine with user context
+ * @fn: the function to execute
+ * @data: data to pass to the function
+ *
+ * Executes the function immediately if process context is available,
+ * otherwise schedules the function for delayed execution.
+ *
+ * Returns: 0 - function was executed
+ * 1 - function was scheduled for execution
+ * <0 - error
+ */
+int scsi_execute_in_process_context(void (*fn)(void *data), void *data)
+{
+ struct work_queue_work *wqw;
+
+ if (!in_interrupt()) {
+ fn(data);
+ return 0;
+ }
+
+ wqw = kmalloc(sizeof(struct work_queue_work), GFP_ATOMIC);
+
+ if (unlikely(!wqw)) {
+ printk(KERN_ERR "Failed to allocate memory\n");
+ WARN_ON(1);
+ return -ENOMEM;
+ }
+
+ INIT_WORK(&wqw->work, execute_in_process_context_work, wqw);
+ wqw->fn = fn;
+ wqw->data = data;
+ schedule_work(&wqw->work);
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(scsi_execute_in_process_context);
return found_target;
}
-struct work_queue_wrapper {
- struct work_struct work;
- struct scsi_target *starget;
-};
-
-static void scsi_target_reap_work(void *data) {
- struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data;
- struct scsi_target *starget = wqw->starget;
+static void scsi_target_reap_usercontext(void *data)
+{
+ struct scsi_target *starget = data;
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
unsigned long flags;
- kfree(wqw);
-
spin_lock_irqsave(shost->host_lock, flags);
if (--starget->reap_ref == 0 && list_empty(&starget->devices)) {
*/
void scsi_target_reap(struct scsi_target *starget)
{
- struct work_queue_wrapper *wqw =
- kzalloc(sizeof(struct work_queue_wrapper), GFP_ATOMIC);
-
- if (!wqw) {
- starget_printk(KERN_ERR, starget,
- "Failed to allocate memory in scsi_reap_target()\n");
- return;
- }
-
- INIT_WORK(&wqw->work, scsi_target_reap_work, wqw);
- wqw->starget = starget;
- schedule_work(&wqw->work);
+ scsi_execute_in_process_context(scsi_target_reap_usercontext, starget);
}
/**
put_device(&sdev->sdev_gendev);
}
-static void scsi_device_dev_release(struct device *dev)
+static void scsi_device_dev_release_usercontext(void *data)
{
+ struct device *dev = data;
struct scsi_device *sdev;
struct device *parent;
struct scsi_target *starget;
if (sdev->request_queue) {
sdev->request_queue->queuedata = NULL;
+ /* user context needed to free queue */
scsi_free_queue(sdev->request_queue);
/* temporary expedient, try to catch use of queue lock
* after free of sdev */
put_device(parent);
}
+static void scsi_device_dev_release(struct device *dev)
+{
+ scsi_execute_in_process_context(scsi_device_dev_release_usercontext, dev);
+}
+
static struct class sdev_class = {
.name = "scsi_device",
.release = scsi_device_cls_release,
struct scsi_transport_template t;
struct iscsi_transport *iscsi_transport;
struct list_head list;
- /*
- * List of sessions for this transport
- */
- struct list_head sessions;
/*
* based on transport capabilities, at register time we set these
* bits to tell the transport class it wants attributes displayed
#define Z_MAX_ERROR 16
#define Z_HIWAT_ERROR 12
+static LIST_HEAD(sesslist);
+static DEFINE_SPINLOCK(sesslock);
static LIST_HEAD(connlist);
static DEFINE_SPINLOCK(connlock);
+static struct iscsi_cls_session *iscsi_session_lookup(uint64_t handle)
+{
+ unsigned long flags;
+ struct iscsi_cls_session *sess;
+
+ spin_lock_irqsave(&sesslock, flags);
+ list_for_each_entry(sess, &sesslist, sess_list) {
+ if (sess == iscsi_ptr(handle)) {
+ spin_unlock_irqrestore(&sesslock, flags);
+ return sess;
+ }
+ }
+ spin_unlock_irqrestore(&sesslock, flags);
+ return NULL;
+}
+
+static struct iscsi_cls_conn *iscsi_conn_lookup(uint64_t handle)
+{
+ unsigned long flags;
+ struct iscsi_cls_conn *conn;
+
+ spin_lock_irqsave(&connlock, flags);
+ list_for_each_entry(conn, &connlist, conn_list) {
+ if (conn == iscsi_ptr(handle)) {
+ spin_unlock_irqrestore(&connlock, flags);
+ return conn;
+ }
+ }
+ spin_unlock_irqrestore(&connlock, flags);
+ return NULL;
+}
+
/*
* The following functions can be used by LLDs that allocate
* their own scsi_hosts or by software iscsi LLDs
{
struct iscsi_cls_session *session;
struct Scsi_Host *shost;
+ unsigned long flags;
shost = scsi_host_alloc(transport->host_template,
hostdata_privsize(transport));
goto remove_host;
*(unsigned long*)shost->hostdata = (unsigned long)session;
+ spin_lock_irqsave(&sesslock, flags);
+ list_add(&session->sess_list, &sesslist);
+ spin_unlock_irqrestore(&sesslock, flags);
return shost;
remove_host:
int iscsi_transport_destroy_session(struct Scsi_Host *shost)
{
struct iscsi_cls_session *session;
+ unsigned long flags;
scsi_remove_host(shost);
session = hostdata_session(shost->hostdata);
+ spin_lock_irqsave(&sesslock, flags);
+ list_del(&session->sess_list);
+ spin_unlock_irqrestore(&sesslock, flags);
iscsi_destroy_session(session);
/* ref from host alloc */
scsi_host_put(shost);
/*
* iscsi interface functions
*/
-static struct iscsi_cls_conn*
-iscsi_if_find_conn(uint64_t key)
-{
- unsigned long flags;
- struct iscsi_cls_conn *conn;
-
- spin_lock_irqsave(&connlock, flags);
- list_for_each_entry(conn, &connlist, conn_list)
- if (conn->connh == key) {
- spin_unlock_irqrestore(&connlock, flags);
- return conn;
- }
- spin_unlock_irqrestore(&connlock, flags);
- return NULL;
-}
-
static struct iscsi_internal *
iscsi_if_transport_lookup(struct iscsi_transport *tt)
{
if (!zp)
return NULL;
+ zp->size = size;
+ zp->hiwat = hiwat;
+ INIT_LIST_HEAD(&zp->freequeue);
+ spin_lock_init(&zp->freelock);
+ atomic_set(&zp->allocated, 0);
+
zp->pool = mempool_create(max, mempool_zone_alloc_skb,
mempool_zone_free_skb, zp);
if (!zp->pool) {
return NULL;
}
- zp->size = size;
- zp->hiwat = hiwat;
-
- INIT_LIST_HEAD(&zp->freequeue);
- spin_lock_init(&zp->freelock);
- atomic_set(&zp->allocated, 0);
-
return zp;
}
return 0;
}
-int iscsi_recv_pdu(iscsi_connh_t connh, struct iscsi_hdr *hdr,
+int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size)
{
struct nlmsghdr *nlh;
struct sk_buff *skb;
struct iscsi_uevent *ev;
- struct iscsi_cls_conn *conn;
char *pdu;
int len = NLMSG_SPACE(sizeof(*ev) + sizeof(struct iscsi_hdr) +
data_size);
- conn = iscsi_if_find_conn(connh);
- BUG_ON(!conn);
-
mempool_zone_complete(conn->z_pdu);
skb = mempool_zone_get_skb(conn->z_pdu);
if (!skb) {
- iscsi_conn_error(connh, ISCSI_ERR_CONN_FAILED);
+ iscsi_conn_error(conn, ISCSI_ERR_CONN_FAILED);
dev_printk(KERN_ERR, &conn->dev, "iscsi: can not deliver "
"control PDU: OOM\n");
return -ENOMEM;
ev->type = ISCSI_KEVENT_RECV_PDU;
if (atomic_read(&conn->z_pdu->allocated) >= conn->z_pdu->hiwat)
ev->iferror = -ENOMEM;
- ev->r.recv_req.conn_handle = connh;
+ ev->r.recv_req.conn_handle = iscsi_handle(conn);
pdu = (char*)ev + sizeof(*ev);
memcpy(pdu, hdr, sizeof(struct iscsi_hdr));
memcpy(pdu + sizeof(struct iscsi_hdr), data, data_size);
}
EXPORT_SYMBOL_GPL(iscsi_recv_pdu);
-void iscsi_conn_error(iscsi_connh_t connh, enum iscsi_err error)
+void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error)
{
struct nlmsghdr *nlh;
struct sk_buff *skb;
struct iscsi_uevent *ev;
- struct iscsi_cls_conn *conn;
int len = NLMSG_SPACE(sizeof(*ev));
- conn = iscsi_if_find_conn(connh);
- BUG_ON(!conn);
-
mempool_zone_complete(conn->z_error);
skb = mempool_zone_get_skb(conn->z_error);
if (atomic_read(&conn->z_error->allocated) >= conn->z_error->hiwat)
ev->iferror = -ENOMEM;
ev->r.connerror.error = error;
- ev->r.connerror.conn_handle = connh;
+ ev->r.connerror.conn_handle = iscsi_handle(conn);
iscsi_unicast_skb(conn->z_error, skb);
}
static int
-iscsi_if_get_stats(struct iscsi_transport *transport, struct sk_buff *skb,
- struct nlmsghdr *nlh)
+iscsi_if_get_stats(struct iscsi_transport *transport, struct nlmsghdr *nlh)
{
struct iscsi_uevent *ev = NLMSG_DATA(nlh);
struct iscsi_stats *stats;
ISCSI_STATS_CUSTOM_MAX);
int err = 0;
- conn = iscsi_if_find_conn(ev->u.get_stats.conn_handle);
+ conn = iscsi_conn_lookup(ev->u.get_stats.conn_handle);
if (!conn)
return -EEXIST;
((char*)evstat + sizeof(*evstat));
memset(stats, 0, sizeof(*stats));
- transport->get_stats(ev->u.get_stats.conn_handle, stats);
+ transport->get_stats(conn, stats);
actual_size = NLMSG_SPACE(sizeof(struct iscsi_uevent) +
sizeof(struct iscsi_stats) +
sizeof(struct iscsi_stats_custom) *
stats->custom_length);
actual_size -= sizeof(*nlhstat);
actual_size = NLMSG_LENGTH(actual_size);
- skb_trim(skb, NLMSG_ALIGN(actual_size));
+ skb_trim(skbstat, NLMSG_ALIGN(actual_size));
nlhstat->nlmsg_len = actual_size;
err = iscsi_unicast_skb(conn->z_pdu, skbstat);
iscsi_if_create_session(struct iscsi_internal *priv, struct iscsi_uevent *ev)
{
struct iscsi_transport *transport = priv->iscsi_transport;
- struct Scsi_Host *shost;
-
- if (!transport->create_session)
- return -EINVAL;
+ struct iscsi_cls_session *session;
+ uint32_t sid;
- shost = transport->create_session(&priv->t,
- ev->u.c_session.initial_cmdsn);
- if (!shost)
+ session = transport->create_session(&priv->t,
+ ev->u.c_session.initial_cmdsn,
+ &sid);
+ if (!session)
return -ENOMEM;
- ev->r.c_session_ret.session_handle = iscsi_handle(iscsi_hostdata(shost->hostdata));
- ev->r.c_session_ret.sid = shost->host_no;
+ ev->r.c_session_ret.session_handle = iscsi_handle(session);
+ ev->r.c_session_ret.sid = sid;
return 0;
}
static int
-iscsi_if_destroy_session(struct iscsi_internal *priv, struct iscsi_uevent *ev)
+iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev)
{
- struct iscsi_transport *transport = priv->iscsi_transport;
-
- struct Scsi_Host *shost;
-
- if (!transport->destroy_session)
- return -EINVAL;
-
- shost = scsi_host_lookup(ev->u.d_session.sid);
- if (shost == ERR_PTR(-ENXIO))
- return -EEXIST;
-
- if (transport->destroy_session)
- transport->destroy_session(shost);
- /* ref from host lookup */
- scsi_host_put(shost);
- return 0;
-}
-
-static int
-iscsi_if_create_conn(struct iscsi_transport *transport, struct iscsi_uevent *ev){
- struct Scsi_Host *shost;
struct iscsi_cls_conn *conn;
+ struct iscsi_cls_session *session;
unsigned long flags;
- if (!transport->create_conn)
+ session = iscsi_session_lookup(ev->u.c_conn.session_handle);
+ if (!session)
return -EINVAL;
- shost = scsi_host_lookup(ev->u.c_conn.sid);
- if (shost == ERR_PTR(-ENXIO))
- return -EEXIST;
-
- conn = transport->create_conn(shost, ev->u.c_conn.cid);
+ conn = transport->create_conn(session, ev->u.c_conn.cid);
if (!conn)
- goto release_ref;
+ return -ENOMEM;
conn->z_pdu = mempool_zone_init(Z_MAX_PDU,
NLMSG_SPACE(sizeof(struct iscsi_uevent) +
goto free_pdu_pool;
}
- ev->r.handle = conn->connh = iscsi_handle(conn->dd_data);
+ ev->r.handle = iscsi_handle(conn);
spin_lock_irqsave(&connlock, flags);
list_add(&conn->conn_list, &connlist);
conn->active = 1;
spin_unlock_irqrestore(&connlock, flags);
- scsi_host_put(shost);
return 0;
free_pdu_pool:
destroy_conn:
if (transport->destroy_conn)
transport->destroy_conn(conn->dd_data);
-release_ref:
- scsi_host_put(shost);
return -ENOMEM;
}
struct iscsi_cls_conn *conn;
struct mempool_zone *z_error, *z_pdu;
- conn = iscsi_if_find_conn(ev->u.d_conn.conn_handle);
+ conn = iscsi_conn_lookup(ev->u.d_conn.conn_handle);
if (!conn)
- return -EEXIST;
-
- if (!transport->destroy_conn)
return -EINVAL;
-
spin_lock_irqsave(&connlock, flags);
conn->active = 0;
list_del(&conn->conn_list);
struct iscsi_uevent *ev = NLMSG_DATA(nlh);
struct iscsi_transport *transport = NULL;
struct iscsi_internal *priv;
-
- if (NETLINK_CREDS(skb)->uid)
- return -EPERM;
+ struct iscsi_cls_session *session;
+ struct iscsi_cls_conn *conn;
priv = iscsi_if_transport_lookup(iscsi_ptr(ev->transport_handle));
if (!priv)
return -EINVAL;
transport = priv->iscsi_transport;
- daemon_pid = NETLINK_CREDS(skb)->pid;
+ if (!try_module_get(transport->owner))
+ return -EINVAL;
switch (nlh->nlmsg_type) {
case ISCSI_UEVENT_CREATE_SESSION:
err = iscsi_if_create_session(priv, ev);
break;
case ISCSI_UEVENT_DESTROY_SESSION:
- err = iscsi_if_destroy_session(priv, ev);
+ session = iscsi_session_lookup(ev->u.d_session.session_handle);
+ if (session)
+ transport->destroy_session(session);
+ else
+ err = -EINVAL;
break;
case ISCSI_UEVENT_CREATE_CONN:
err = iscsi_if_create_conn(transport, ev);
err = iscsi_if_destroy_conn(transport, ev);
break;
case ISCSI_UEVENT_BIND_CONN:
- if (!iscsi_if_find_conn(ev->u.b_conn.conn_handle))
- return -EEXIST;
- ev->r.retcode = transport->bind_conn(
- ev->u.b_conn.session_handle,
- ev->u.b_conn.conn_handle,
- ev->u.b_conn.transport_fd,
- ev->u.b_conn.is_leading);
+ session = iscsi_session_lookup(ev->u.b_conn.session_handle);
+ conn = iscsi_conn_lookup(ev->u.b_conn.conn_handle);
+
+ if (session && conn)
+ ev->r.retcode = transport->bind_conn(session, conn,
+ ev->u.b_conn.transport_fd,
+ ev->u.b_conn.is_leading);
+ else
+ err = -EINVAL;
break;
case ISCSI_UEVENT_SET_PARAM:
- if (!iscsi_if_find_conn(ev->u.set_param.conn_handle))
- return -EEXIST;
- ev->r.retcode = transport->set_param(
- ev->u.set_param.conn_handle,
- ev->u.set_param.param, ev->u.set_param.value);
+ conn = iscsi_conn_lookup(ev->u.set_param.conn_handle);
+ if (conn)
+ ev->r.retcode = transport->set_param(conn,
+ ev->u.set_param.param, ev->u.set_param.value);
+ else
+ err = -EINVAL;
break;
case ISCSI_UEVENT_START_CONN:
- if (!iscsi_if_find_conn(ev->u.start_conn.conn_handle))
- return -EEXIST;
- ev->r.retcode = transport->start_conn(
- ev->u.start_conn.conn_handle);
+ conn = iscsi_conn_lookup(ev->u.start_conn.conn_handle);
+ if (conn)
+ ev->r.retcode = transport->start_conn(conn);
+ else
+ err = -EINVAL;
+
break;
case ISCSI_UEVENT_STOP_CONN:
- if (!iscsi_if_find_conn(ev->u.stop_conn.conn_handle))
- return -EEXIST;
- transport->stop_conn(ev->u.stop_conn.conn_handle,
- ev->u.stop_conn.flag);
+ conn = iscsi_conn_lookup(ev->u.stop_conn.conn_handle);
+ if (conn)
+ transport->stop_conn(conn, ev->u.stop_conn.flag);
+ else
+ err = -EINVAL;
break;
case ISCSI_UEVENT_SEND_PDU:
- if (!iscsi_if_find_conn(ev->u.send_pdu.conn_handle))
- return -EEXIST;
- ev->r.retcode = transport->send_pdu(
- ev->u.send_pdu.conn_handle,
- (struct iscsi_hdr*)((char*)ev + sizeof(*ev)),
- (char*)ev + sizeof(*ev) + ev->u.send_pdu.hdr_size,
- ev->u.send_pdu.data_size);
+ conn = iscsi_conn_lookup(ev->u.send_pdu.conn_handle);
+ if (conn)
+ ev->r.retcode = transport->send_pdu(conn,
+ (struct iscsi_hdr*)((char*)ev + sizeof(*ev)),
+ (char*)ev + sizeof(*ev) + ev->u.send_pdu.hdr_size,
+ ev->u.send_pdu.data_size);
+ else
+ err = -EINVAL;
break;
case ISCSI_UEVENT_GET_STATS:
- err = iscsi_if_get_stats(transport, skb, nlh);
+ err = iscsi_if_get_stats(transport, nlh);
break;
default:
err = -EINVAL;
break;
}
+ module_put(transport->owner);
return err;
}
/* Get message from skb (based on rtnetlink_rcv_skb). Each message is
* processed by iscsi_if_recv_msg. Malformed skbs with wrong length are
- * discarded silently. */
+ * or invalid creds discarded silently. */
static void
iscsi_if_rx(struct sock *sk, int len)
{
mutex_lock(&rx_queue_mutex);
while ((skb = skb_dequeue(&sk->sk_receive_queue)) != NULL) {
+ if (NETLINK_CREDS(skb)->uid) {
+ skb_pull(skb, skb->len);
+ goto free_skb;
+ }
+ daemon_pid = NETLINK_CREDS(skb)->pid;
+
while (skb->len >= NLMSG_SPACE(0)) {
int err;
uint32_t rlen;
skb->len < nlh->nlmsg_len) {
break;
}
+
ev = NLMSG_DATA(nlh);
rlen = NLMSG_ALIGN(nlh->nlmsg_len);
if (rlen > skb->len)
rlen = skb->len;
+
err = iscsi_if_recv_msg(skb, nlh);
if (err) {
ev->type = ISCSI_KEVENT_IF_ERROR;
} while (err < 0 && err != -ECONNREFUSED);
skb_pull(skb, rlen);
}
+free_skb:
kfree_skb(skb);
}
mutex_unlock(&rx_queue_mutex);
struct iscsi_cls_conn *conn = iscsi_cdev_to_conn(cdev); \
struct iscsi_transport *t = conn->transport; \
\
- t->get_conn_param(conn->dd_data, param, &value); \
+ t->get_conn_param(conn, param, &value); \
return snprintf(buf, 20, format"\n", value); \
}
{ \
uint32_t value = 0; \
struct iscsi_cls_session *session = iscsi_cdev_to_session(cdev); \
- struct Scsi_Host *shost = iscsi_session_to_shost(session); \
struct iscsi_transport *t = session->transport; \
\
- t->get_session_param(shost, param, &value); \
+ t->get_session_param(session, param, &value); \
return snprintf(buf, 20, format"\n", value); \
}
return NULL;
memset(priv, 0, sizeof(*priv));
INIT_LIST_HEAD(&priv->list);
- INIT_LIST_HEAD(&priv->sessions);
priv->iscsi_transport = tt;
priv->cdev.class = &iscsi_transport_class;
if (pm) {
dp_scr = scr_to_cpu(pm->ret);
- dp_ofs -= scr_to_cpu(pm->sg.size);
+ dp_ofs -= scr_to_cpu(pm->sg.size) & 0x00ffffff;
}
/*
}
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
port->ip_sscr |= IOC4_SSCR_HFC_EN;
}
else {
- info->flags &= ~ASYNC_CTS_FLOW;
port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
}
writel(port->ip_sscr, &port->ip_serial_regs->sscr);
info = the_port->info;
- if (info->tty) {
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- info->tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- info->tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- info->tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- info->tty->alt_speed = 460800;
- }
local_open(port);
/* set the speed of the serial port */
}
if (wait_time <= 0)
printk(KERN_WARNING "%s %s: BIOS handoff "
- "failed (BIOS bug ?)\n",
- pdev->dev.bus_id, "OHCI");
+ "failed (BIOS bug ?) %08x\n",
+ pdev->dev.bus_id, "OHCI",
+ readl(base + OHCI_CONTROL));
/* reset controller, preserving RWC */
writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
pr_debug("%s %s: BIOS handoff\n",
pdev->dev.bus_id, "EHCI");
+#if 0
+/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
+ * but that seems dubious in general (the BIOS left it off intentionally)
+ * and is known to prevent some systems from booting. so we won't do this
+ * unless maybe we can determine when we're on a system that needs SMI forced.
+ */
/* BIOS workaround (?): be sure the
* pre-Linux code receives the SMI
*/
pci_write_config_dword(pdev,
offset + EHCI_USBLEGCTLSTS,
val | EHCI_USBLEGCTLSTS_SOOE);
+#endif
}
/* always say Linux will own the hardware
* it down, and hope nothing goes too wrong
*/
printk(KERN_WARNING "%s %s: BIOS handoff "
- "failed (BIOS bug ?)\n",
- pdev->dev.bus_id, "EHCI");
+ "failed (BIOS bug ?) %08x\n",
+ pdev->dev.bus_id, "EHCI", cap);
pci_write_config_byte(pdev, offset + 2, 0);
}
},
};
-extern struct device_driver sl811h_driver;
+extern struct platform_driver sl811h_driver;
static struct platform_device platform_dev = {
.id = -1,
* initialized already because of the link order dependency created
* by referencing "sl811h_driver".
*/
- platform_dev.name = sl811h_driver.name;
+ platform_dev.name = sl811h_driver.driver.name;
return platform_device_register(&platform_dev);
}
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
#define USB_VENDOR_ID_LD 0x0f11
-#define USB_DEVICE_ID_CASSY 0x1000
-#define USB_DEVICE_ID_POCKETCASSY 0x1010
-#define USB_DEVICE_ID_MOBILECASSY 0x1020
-#define USB_DEVICE_ID_JWM 0x1080
-#define USB_DEVICE_ID_DMMP 0x1081
-#define USB_DEVICE_ID_UMIP 0x1090
-#define USB_DEVICE_ID_VIDEOCOM 0x1200
-#define USB_DEVICE_ID_COM3LAB 0x2000
-#define USB_DEVICE_ID_TELEPORT 0x2010
-#define USB_DEVICE_ID_NETWORKANALYSER 0x2020
-#define USB_DEVICE_ID_POWERCONTROL 0x2030
+#define USB_DEVICE_ID_LD_CASSY 0x1000
+#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010
+#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020
+#define USB_DEVICE_ID_LD_JWM 0x1080
+#define USB_DEVICE_ID_LD_DMMP 0x1081
+#define USB_DEVICE_ID_LD_UMIP 0x1090
+#define USB_DEVICE_ID_LD_XRAY1 0x1100
+#define USB_DEVICE_ID_LD_XRAY2 0x1101
+#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200
+#define USB_DEVICE_ID_LD_COM3LAB 0x2000
+#define USB_DEVICE_ID_LD_TELEPORT 0x2010
+#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020
+#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030
+#define USB_DEVICE_ID_LD_MACHINETEST 0x2040
#define USB_VENDOR_ID_APPLE 0x05ac
#define USB_DEVICE_ID_APPLE_POWERMOUSE 0x0304
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
config USB_LD
tristate "USB LD driver"
- depends on USB && EXPERIMENTAL
+ depends on USB
help
This driver is for generic USB devices that use interrupt transfers,
like LD Didactic's USB devices.
* V0.1 (mh) Initial version
* V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint)
* V0.12 (mh) Added kmalloc check for string buffer
+ * V0.13 (mh) Added support for LD X-Ray and Machine Test System
*/
#include <linux/config.h>
/* Define these values to match your devices */
#define USB_VENDOR_ID_LD 0x0f11 /* USB Vendor ID of LD Didactic GmbH */
-#define USB_DEVICE_ID_CASSY 0x1000 /* USB Product ID for all CASSY-S modules */
-#define USB_DEVICE_ID_POCKETCASSY 0x1010 /* USB Product ID for Pocket-CASSY */
-#define USB_DEVICE_ID_MOBILECASSY 0x1020 /* USB Product ID for Mobile-CASSY */
-#define USB_DEVICE_ID_JWM 0x1080 /* USB Product ID for Joule and Wattmeter */
-#define USB_DEVICE_ID_DMMP 0x1081 /* USB Product ID for Digital Multimeter P (reserved) */
-#define USB_DEVICE_ID_UMIP 0x1090 /* USB Product ID for UMI P */
-#define USB_DEVICE_ID_VIDEOCOM 0x1200 /* USB Product ID for VideoCom */
-#define USB_DEVICE_ID_COM3LAB 0x2000 /* USB Product ID for COM3LAB */
-#define USB_DEVICE_ID_TELEPORT 0x2010 /* USB Product ID for Terminal Adapter */
-#define USB_DEVICE_ID_NETWORKANALYSER 0x2020 /* USB Product ID for Network Analyser */
-#define USB_DEVICE_ID_POWERCONTROL 0x2030 /* USB Product ID for Controlling device for Power Electronics */
+#define USB_DEVICE_ID_LD_CASSY 0x1000 /* USB Product ID of CASSY-S */
+#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010 /* USB Product ID of Pocket-CASSY */
+#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020 /* USB Product ID of Mobile-CASSY */
+#define USB_DEVICE_ID_LD_JWM 0x1080 /* USB Product ID of Joule and Wattmeter */
+#define USB_DEVICE_ID_LD_DMMP 0x1081 /* USB Product ID of Digital Multimeter P (reserved) */
+#define USB_DEVICE_ID_LD_UMIP 0x1090 /* USB Product ID of UMI P */
+#define USB_DEVICE_ID_LD_XRAY1 0x1100 /* USB Product ID of X-Ray Apparatus */
+#define USB_DEVICE_ID_LD_XRAY2 0x1101 /* USB Product ID of X-Ray Apparatus */
+#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200 /* USB Product ID of VideoCom */
+#define USB_DEVICE_ID_LD_COM3LAB 0x2000 /* USB Product ID of COM3LAB */
+#define USB_DEVICE_ID_LD_TELEPORT 0x2010 /* USB Product ID of Terminal Adapter */
+#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020 /* USB Product ID of Network Analyser */
+#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030 /* USB Product ID of Converter Control Unit */
+#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */
#define USB_VENDOR_ID_VERNIER 0x08f7
#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
/* table of devices that work with this driver */
static struct usb_device_id ld_usb_table [] = {
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER) },
- { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
+ { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, ld_usb_table);
-MODULE_VERSION("V0.12");
+MODULE_VERSION("V0.13");
MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
MODULE_DESCRIPTION("LD USB Driver");
MODULE_LICENSE("GPL");
/* workaround for early firmware versions on fast computers */
if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) &&
- ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_CASSY) ||
- (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) &&
+ ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_CASSY) ||
+ (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) &&
(le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
buffer = kmalloc(256, GFP_KERNEL);
if (buffer == NULL) {
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
- { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
- { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID ) },
+ { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
+ { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
+ { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ } /* Terminating entry */
};
#define SAGEM_VENDOR_ID 0x079b
#define SAGEM_PRODUCT_ID 0x0027
+
+/* Leadtek GPS 9531 (ID 0413:2101) */
+#define LEADTEK_VENDOR_ID 0x0413
+#define LEADTEK_9531_PRODUCT_ID 0x2101
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Reported by Christian Leber <christian@leber.de> */
+UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100,
+ "TrekStor",
+ "i.Beat 115 2.0",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
+
/* Reported by Stefan Werner <dustbln@gmx.de> */
UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
"TrekStor",
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif
+/* Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
+UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
+ "Neuros Audio",
+ "USB 2.0 HD 2.5",
+ US_SC_DEVICE, US_PR_BULK, NULL,
+ US_FL_NEED_OVERRIDE ),
+
/*
* Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
* The key does not actually break, but it returns zero sense which
"USB Mass Storage Device",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
-/* Patch submitted by Daniel Drake <dsd@gentoo.org>
- * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
-UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
- "Neuros Audio",
- "USB 2.0 HD 2.5",
- US_SC_DEVICE, US_PR_BULK, NULL,
- US_FL_NEED_OVERRIDE ),
+/*
+* Bohdan Linda <bohdan.linda@gmail.com>
+* 1GB USB sticks MyFlash High Speed. I have restricted
+* the revision to my model only
+*/
+UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100,
+ "USB 2.0",
+ "Flash Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_NOT_LOCKABLE ),
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
"Rio",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_BULK32),
+/* Submitted by Jan De Luyck <lkml@kcore.org> */
+UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000,
+ "CITIZEN",
+ "X1DE-USB",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_SINGLE_LUN),
/* Entry needed for flags. Moreover, all devices with this ID use
* bulk-only transport, but _some_ falsely report Control/Bulk instead.
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
+UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
+ "Cowon Systems",
+ "iAUDIO M5",
+ US_SC_DEVICE, US_PR_BULK, NULL,
+ 0 ),
+
/* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
"USB",
US_FL_SINGLE_LUN),
#endif
+/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
+UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001,
+ "DataStor",
+ "USB4500 FW1.04",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
-config BUS_I2C
- bool
- depends on (FB = y) && VISWS
- default y
-
config FB_SUN3
bool "Sun3 framebuffer support"
depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
return retval;
}
+#ifndef MODULE
/**
* video_setup - process command line options
* @options: string of options
return 0;
}
__setup("video=", video_setup);
+#endif
/*
* Visible symbols for modules
par->SysIfaceCntl2 = 0xc0; /* VESA Bios sets this to 0x80! */
+ /* Initialize: by default, we want display config register to be read */
+ par->PanelDispCntlRegRead = 1;
+
/* Enable any user specified display devices. */
par->PanelDispCntlReg1 = 0x00;
if (par->internal_display)
struct neofb_par *par = info->par;
int seqflags, lcdflags, dpmsflags, reg;
+
+ /*
+ * Reload the value stored in the register, if sensible. It might have
+ * been changed via FN keystroke.
+ */
+ if (par->PanelDispCntlRegRead) {
+ neoUnlock();
+ par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03;
+ neoLock(&par->state);
+ }
+ par->PanelDispCntlRegRead = !blank_mode;
+
switch (blank_mode) {
case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
case FB_BLANK_NORMAL: /* just blank screen (backlight stays on) */
seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
lcdflags = par->PanelDispCntlReg1 & 0x02; /* LCD normal */
- dpmsflags = 0; /* no hsync/vsync suppression */
+ dpmsflags = 0x00; /* no hsync/vsync suppression */
break;
case FB_BLANK_UNBLANK: /* unblank */
seqflags = 0; /* Enable sequencer */
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO,
&bytes_read, &smb_read_data,
&buf_type);
pSMBr = (struct smb_com_read_rsp *)smb_read_data;
- if (copy_to_user(current_offset,
- smb_read_data + 4 /* RFC1001 hdr */
- + le16_to_cpu(pSMBr->DataOffset),
- bytes_read)) {
- rc = -EFAULT;
- }
if (smb_read_data) {
+ if (copy_to_user(current_offset,
+ smb_read_data +
+ 4 /* RFC1001 length field */ +
+ le16_to_cpu(pSMBr->DataOffset),
+ bytes_read)) {
+ rc = -EFAULT;
+ }
+
if(buf_type == CIFS_SMALL_BUFFER)
cifs_small_buf_release(smb_read_data);
else if(buf_type == CIFS_LARGE_BUFFER)
ret = compat_core_sys_select(n, inp, outp, exp, &timeout);
if (tvp) {
+ struct compat_timeval rtv;
+
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
- tv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
- tv.tv_sec = timeout;
- if (copy_to_user(tvp, &tv, sizeof(tv))) {
+ rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
+ rtv.tv_sec = timeout;
+ if (compat_timeval_compare(&rtv, &tv) < 0)
+ rtv = tv;
+ if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
sticky:
/*
* If an application puts its timeval in read-only
} while (!ret && !timeout && tsp && (ts.tv_sec || ts.tv_nsec));
if (tsp && !(current->personality & STICKY_TIMEOUTS)) {
- ts.tv_sec += timeout / HZ;
- ts.tv_nsec += (timeout % HZ) * (1000000000/HZ);
- if (ts.tv_nsec >= 1000000000) {
- ts.tv_sec++;
- ts.tv_nsec -= 1000000000;
+ struct compat_timespec rts;
+
+ rts.tv_sec = timeout / HZ;
+ rts.tv_nsec = (timeout % HZ) * (NSEC_PER_SEC/HZ);
+ if (rts.tv_nsec >= NSEC_PER_SEC) {
+ rts.tv_sec++;
+ rts.tv_nsec -= NSEC_PER_SEC;
}
- (void)copy_to_user(tsp, &ts, sizeof(ts));
+ if (compat_timespec_compare(&rts, &ts) < 0)
+ rts = ts;
+ copy_to_user(tsp, &rts, sizeof(rts));
}
if (ret == -ERESTARTNOHAND) {
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
if (tsp && timeout >= 0) {
+ struct compat_timespec rts;
+
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
/* Yes, we know it's actually an s64, but it's also positive. */
- ts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) * 1000;
- ts.tv_sec = timeout;
- if (copy_to_user(tsp, &ts, sizeof(ts))) {
+ rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
+ 1000;
+ rts.tv_sec = timeout;
+ if (compat_timespec_compare(&rts, &ts) < 0)
+ rts = ts;
+ if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
do_each_thread(g,p) {
if (mm == p->mm && p != tsk &&
p->ptrace && p->parent->mm == mm) {
- __ptrace_unlink(p);
+ __ptrace_detach(p, 0);
}
} while_each_thread(g,p);
write_unlock_irq(&tasklist_lock);
#include <linux/slab.h>
/*
- * Unlink a buffer from a transaction checkpoint list.
+ * Unlink a buffer from a transaction.
*
* Called with j_list_lock held.
*/
-static void __buffer_unlink_first(struct journal_head *jh)
+static inline void __buffer_unlink(struct journal_head *jh)
{
transaction_t *transaction;
transaction = jh->b_cp_transaction;
+ jh->b_cp_transaction = NULL;
jh->b_cpnext->b_cpprev = jh->b_cpprev;
jh->b_cpprev->b_cpnext = jh->b_cpnext;
- if (transaction->t_checkpoint_list == jh) {
+ if (transaction->t_checkpoint_list == jh)
transaction->t_checkpoint_list = jh->b_cpnext;
- if (transaction->t_checkpoint_list == jh)
- transaction->t_checkpoint_list = NULL;
- }
-}
-
-/*
- * Unlink a buffer from a transaction checkpoint(io) list.
- *
- * Called with j_list_lock held.
- */
-
-static inline void __buffer_unlink(struct journal_head *jh)
-{
- transaction_t *transaction;
-
- transaction = jh->b_cp_transaction;
-
- __buffer_unlink_first(jh);
- if (transaction->t_checkpoint_io_list == jh) {
- transaction->t_checkpoint_io_list = jh->b_cpnext;
- if (transaction->t_checkpoint_io_list == jh)
- transaction->t_checkpoint_io_list = NULL;
- }
-}
-
-/*
- * Move a buffer from the checkpoint list to the checkpoint io list
- *
- * Called with j_list_lock held
- */
-
-static inline void __buffer_relink_io(struct journal_head *jh)
-{
- transaction_t *transaction;
-
- transaction = jh->b_cp_transaction;
- __buffer_unlink_first(jh);
-
- if (!transaction->t_checkpoint_io_list) {
- jh->b_cpnext = jh->b_cpprev = jh;
- } else {
- jh->b_cpnext = transaction->t_checkpoint_io_list;
- jh->b_cpprev = transaction->t_checkpoint_io_list->b_cpprev;
- jh->b_cpprev->b_cpnext = jh;
- jh->b_cpnext->b_cpprev = jh;
- }
- transaction->t_checkpoint_io_list = jh;
+ if (transaction->t_checkpoint_list == jh)
+ transaction->t_checkpoint_list = NULL;
}
/*
* Try to release a checkpointed buffer from its transaction.
- * Returns 1 if we released it and 2 if we also released the
- * whole transaction.
- *
+ * Returns 1 if we released it.
* Requires j_list_lock
* Called under jbd_lock_bh_state(jh2bh(jh)), and drops it
*/
if (jh->b_jlist == BJ_None && !buffer_locked(bh) && !buffer_dirty(bh)) {
JBUFFER_TRACE(jh, "remove from checkpoint list");
- ret = __journal_remove_checkpoint(jh) + 1;
+ __journal_remove_checkpoint(jh);
jbd_unlock_bh_state(bh);
journal_remove_journal_head(bh);
BUFFER_TRACE(bh, "release");
__brelse(bh);
+ ret = 1;
} else {
jbd_unlock_bh_state(bh);
}
}
/*
- * Clean up transaction's list of buffers submitted for io.
- * We wait for any pending IO to complete and remove any clean
- * buffers. Note that we take the buffers in the opposite ordering
- * from the one in which they were submitted for IO.
+ * Clean up a transaction's checkpoint list.
+ *
+ * We wait for any pending IO to complete and make sure any clean
+ * buffers are removed from the transaction.
+ *
+ * Return 1 if we performed any actions which might have destroyed the
+ * checkpoint. (journal_remove_checkpoint() deletes the transaction when
+ * the last checkpoint buffer is cleansed)
*
* Called with j_list_lock held.
*/
-
-static void __wait_cp_io(journal_t *journal, transaction_t *transaction)
+static int __cleanup_transaction(journal_t *journal, transaction_t *transaction)
{
- struct journal_head *jh;
+ struct journal_head *jh, *next_jh, *last_jh;
struct buffer_head *bh;
- tid_t this_tid;
- int released = 0;
-
- this_tid = transaction->t_tid;
-restart:
- /* Didn't somebody clean up the transaction in the meanwhile */
- if (journal->j_checkpoint_transactions != transaction ||
- transaction->t_tid != this_tid)
- return;
- while (!released && transaction->t_checkpoint_io_list) {
- jh = transaction->t_checkpoint_io_list;
+ int ret = 0;
+
+ assert_spin_locked(&journal->j_list_lock);
+ jh = transaction->t_checkpoint_list;
+ if (!jh)
+ return 0;
+
+ last_jh = jh->b_cpprev;
+ next_jh = jh;
+ do {
+ jh = next_jh;
bh = jh2bh(jh);
- if (!jbd_trylock_bh_state(bh)) {
- jbd_sync_bh(journal, bh);
- spin_lock(&journal->j_list_lock);
- goto restart;
- }
if (buffer_locked(bh)) {
atomic_inc(&bh->b_count);
spin_unlock(&journal->j_list_lock);
- jbd_unlock_bh_state(bh);
wait_on_buffer(bh);
/* the journal_head may have gone by now */
BUFFER_TRACE(bh, "brelse");
__brelse(bh);
- spin_lock(&journal->j_list_lock);
- goto restart;
+ goto out_return_1;
}
+
/*
- * Now in whatever state the buffer currently is, we know that
- * it has been written out and so we can drop it from the list
+ * This is foul
*/
- released = __journal_remove_checkpoint(jh);
- jbd_unlock_bh_state(bh);
- }
+ if (!jbd_trylock_bh_state(bh)) {
+ jbd_sync_bh(journal, bh);
+ goto out_return_1;
+ }
+
+ if (jh->b_transaction != NULL) {
+ transaction_t *t = jh->b_transaction;
+ tid_t tid = t->t_tid;
+
+ spin_unlock(&journal->j_list_lock);
+ jbd_unlock_bh_state(bh);
+ log_start_commit(journal, tid);
+ log_wait_commit(journal, tid);
+ goto out_return_1;
+ }
+
+ /*
+ * AKPM: I think the buffer_jbddirty test is redundant - it
+ * shouldn't have NULL b_transaction?
+ */
+ next_jh = jh->b_cpnext;
+ if (!buffer_dirty(bh) && !buffer_jbddirty(bh)) {
+ BUFFER_TRACE(bh, "remove from checkpoint");
+ __journal_remove_checkpoint(jh);
+ jbd_unlock_bh_state(bh);
+ journal_remove_journal_head(bh);
+ __brelse(bh);
+ ret = 1;
+ } else {
+ jbd_unlock_bh_state(bh);
+ }
+ } while (jh != last_jh);
+
+ return ret;
+out_return_1:
+ spin_lock(&journal->j_list_lock);
+ return 1;
}
#define NR_BATCH 64
{
int i;
+ spin_unlock(&journal->j_list_lock);
ll_rw_block(SWRITE, *batch_count, bhs);
+ spin_lock(&journal->j_list_lock);
for (i = 0; i < *batch_count; i++) {
struct buffer_head *bh = bhs[i];
clear_buffer_jwrite(bh);
* Return 1 if something happened which requires us to abort the current
* scan of the checkpoint list.
*
- * Called with j_list_lock held and drops it if 1 is returned
+ * Called with j_list_lock held.
* Called under jbd_lock_bh_state(jh2bh(jh)), and drops it
*/
-static int __process_buffer(journal_t *journal, struct journal_head *jh,
- struct buffer_head **bhs, int *batch_count)
+static int __flush_buffer(journal_t *journal, struct journal_head *jh,
+ struct buffer_head **bhs, int *batch_count,
+ int *drop_count)
{
struct buffer_head *bh = jh2bh(jh);
int ret = 0;
- if (buffer_locked(bh)) {
- get_bh(bh);
- spin_unlock(&journal->j_list_lock);
- jbd_unlock_bh_state(bh);
- wait_on_buffer(bh);
- /* the journal_head may have gone by now */
- BUFFER_TRACE(bh, "brelse");
- put_bh(bh);
- ret = 1;
- }
- else if (jh->b_transaction != NULL) {
- transaction_t *t = jh->b_transaction;
- tid_t tid = t->t_tid;
+ if (buffer_dirty(bh) && !buffer_locked(bh) && jh->b_jlist == BJ_None) {
+ J_ASSERT_JH(jh, jh->b_transaction == NULL);
- spin_unlock(&journal->j_list_lock);
- jbd_unlock_bh_state(bh);
- log_start_commit(journal, tid);
- log_wait_commit(journal, tid);
- ret = 1;
- }
- else if (!buffer_dirty(bh)) {
- J_ASSERT_JH(jh, !buffer_jbddirty(bh));
- BUFFER_TRACE(bh, "remove from checkpoint");
- __journal_remove_checkpoint(jh);
- spin_unlock(&journal->j_list_lock);
- jbd_unlock_bh_state(bh);
- journal_remove_journal_head(bh);
- put_bh(bh);
- ret = 1;
- }
- else {
/*
* Important: we are about to write the buffer, and
* possibly block, while still holding the journal lock.
J_ASSERT_BH(bh, !buffer_jwrite(bh));
set_buffer_jwrite(bh);
bhs[*batch_count] = bh;
- __buffer_relink_io(jh);
jbd_unlock_bh_state(bh);
(*batch_count)++;
if (*batch_count == NR_BATCH) {
- spin_unlock(&journal->j_list_lock);
__flush_batch(journal, bhs, batch_count);
ret = 1;
}
+ } else {
+ int last_buffer = 0;
+ if (jh->b_cpnext == jh) {
+ /* We may be about to drop the transaction. Tell the
+ * caller that the lists have changed.
+ */
+ last_buffer = 1;
+ }
+ if (__try_to_free_cp_buf(jh)) {
+ (*drop_count)++;
+ ret = last_buffer;
+ }
}
return ret;
}
/*
- * Perform an actual checkpoint. We take the first transaction on the
- * list of transactions to be checkpointed and send all its buffers
- * to disk. We submit larger chunks of data at once.
+ * Perform an actual checkpoint. We don't write out only enough to
+ * satisfy the current blocked requests: rather we submit a reasonably
+ * sized chunk of the outstanding data to disk at once for
+ * efficiency. __log_wait_for_space() will retry if we didn't free enough.
*
+ * However, we _do_ take into account the amount requested so that once
+ * the IO has been queued, we can return as soon as enough of it has
+ * completed to disk.
+ *
* The journal should be locked before calling this function.
*/
int log_do_checkpoint(journal_t *journal)
{
- transaction_t *transaction;
- tid_t this_tid;
int result;
+ int batch_count = 0;
+ struct buffer_head *bhs[NR_BATCH];
jbd_debug(1, "Start checkpoint\n");
return result;
/*
- * OK, we need to start writing disk blocks. Take one transaction
- * and write it.
+ * OK, we need to start writing disk blocks. Try to free up a
+ * quarter of the log in a single checkpoint if we can.
*/
- spin_lock(&journal->j_list_lock);
- if (!journal->j_checkpoint_transactions)
- goto out;
- transaction = journal->j_checkpoint_transactions;
- this_tid = transaction->t_tid;
-restart:
/*
- * If someone cleaned up this transaction while we slept, we're
- * done (maybe it's a new transaction, but it fell at the same
- * address).
+ * AKPM: check this code. I had a feeling a while back that it
+ * degenerates into a busy loop at unmount time.
*/
- if (journal->j_checkpoint_transactions == transaction &&
- transaction->t_tid == this_tid) {
- int batch_count = 0;
- struct buffer_head *bhs[NR_BATCH];
- struct journal_head *jh;
- int retry = 0;
-
- while (!retry && transaction->t_checkpoint_list) {
+ spin_lock(&journal->j_list_lock);
+ while (journal->j_checkpoint_transactions) {
+ transaction_t *transaction;
+ struct journal_head *jh, *last_jh, *next_jh;
+ int drop_count = 0;
+ int cleanup_ret, retry = 0;
+ tid_t this_tid;
+
+ transaction = journal->j_checkpoint_transactions;
+ this_tid = transaction->t_tid;
+ jh = transaction->t_checkpoint_list;
+ last_jh = jh->b_cpprev;
+ next_jh = jh;
+ do {
struct buffer_head *bh;
- jh = transaction->t_checkpoint_list;
+ jh = next_jh;
+ next_jh = jh->b_cpnext;
bh = jh2bh(jh);
if (!jbd_trylock_bh_state(bh)) {
jbd_sync_bh(journal, bh);
+ spin_lock(&journal->j_list_lock);
retry = 1;
break;
}
- retry = __process_buffer(journal, jh, bhs,
- &batch_count);
- if (!retry &&
- lock_need_resched(&journal->j_list_lock)) {
- spin_unlock(&journal->j_list_lock);
+ retry = __flush_buffer(journal, jh, bhs, &batch_count, &drop_count);
+ if (cond_resched_lock(&journal->j_list_lock)) {
retry = 1;
break;
}
- }
+ } while (jh != last_jh && !retry);
if (batch_count) {
- if (!retry) {
- spin_unlock(&journal->j_list_lock);
- retry = 1;
- }
__flush_batch(journal, bhs, &batch_count);
+ retry = 1;
}
- if (retry) {
- spin_lock(&journal->j_list_lock);
- goto restart;
- }
/*
- * Now we have cleaned up the first transaction's checkpoint
- * list. Let's clean up the second one.
+ * If someone cleaned up this transaction while we slept, we're
+ * done
+ */
+ if (journal->j_checkpoint_transactions != transaction)
+ break;
+ if (retry)
+ continue;
+ /*
+ * Maybe it's a new transaction, but it fell at the same
+ * address
*/
- __wait_cp_io(journal, transaction);
+ if (transaction->t_tid != this_tid)
+ continue;
+ /*
+ * We have walked the whole transaction list without
+ * finding anything to write to disk. We had better be
+ * able to make some progress or we are in trouble.
+ */
+ cleanup_ret = __cleanup_transaction(journal, transaction);
+ J_ASSERT(drop_count != 0 || cleanup_ret != 0);
+ if (journal->j_checkpoint_transactions != transaction)
+ break;
}
-out:
spin_unlock(&journal->j_list_lock);
result = cleanup_journal_tail(journal);
if (result < 0)
return result;
+
return 0;
}
/* Checkpoint list management */
-/*
- * journal_clean_one_cp_list
- *
- * Find all the written-back checkpoint buffers in the given list and release them.
- *
- * Called with the journal locked.
- * Called with j_list_lock held.
- * Returns number of bufers reaped (for debug)
- */
-
-static int journal_clean_one_cp_list(struct journal_head *jh, int *released)
-{
- struct journal_head *last_jh;
- struct journal_head *next_jh = jh;
- int ret, freed = 0;
-
- *released = 0;
- if (!jh)
- return 0;
-
- last_jh = jh->b_cpprev;
- do {
- jh = next_jh;
- next_jh = jh->b_cpnext;
- /* Use trylock because of the ranking */
- if (jbd_trylock_bh_state(jh2bh(jh))) {
- ret = __try_to_free_cp_buf(jh);
- if (ret) {
- freed++;
- if (ret == 2) {
- *released = 1;
- return freed;
- }
- }
- }
- /*
- * This function only frees up some memory if possible so we
- * dont have an obligation to finish processing. Bail out if
- * preemption requested:
- */
- if (need_resched())
- return freed;
- } while (jh != last_jh);
-
- return freed;
-}
-
/*
* journal_clean_checkpoint_list
*
*
* Called with the journal locked.
* Called with j_list_lock held.
- * Returns number of buffers reaped (for debug)
+ * Returns number of bufers reaped (for debug)
*/
int __journal_clean_checkpoint_list(journal_t *journal)
{
transaction_t *transaction, *last_transaction, *next_transaction;
- int ret = 0, released;
+ int ret = 0;
transaction = journal->j_checkpoint_transactions;
- if (!transaction)
+ if (transaction == 0)
goto out;
last_transaction = transaction->t_cpprev;
next_transaction = transaction;
do {
+ struct journal_head *jh;
+
transaction = next_transaction;
next_transaction = transaction->t_cpnext;
- ret += journal_clean_one_cp_list(transaction->
- t_checkpoint_list, &released);
- if (need_resched())
- goto out;
- if (released)
- continue;
- /*
- * It is essential that we are as careful as in the case of
- * t_checkpoint_list with removing the buffer from the list as
- * we can possibly see not yet submitted buffers on io_list
- */
- ret += journal_clean_one_cp_list(transaction->
- t_checkpoint_io_list, &released);
- if (need_resched())
- goto out;
+ jh = transaction->t_checkpoint_list;
+ if (jh) {
+ struct journal_head *last_jh = jh->b_cpprev;
+ struct journal_head *next_jh = jh;
+
+ do {
+ jh = next_jh;
+ next_jh = jh->b_cpnext;
+ /* Use trylock because of the ranknig */
+ if (jbd_trylock_bh_state(jh2bh(jh)))
+ ret += __try_to_free_cp_buf(jh);
+ /*
+ * This function only frees up some memory
+ * if possible so we dont have an obligation
+ * to finish processing. Bail out if preemption
+ * requested:
+ */
+ if (need_resched())
+ goto out;
+ } while (jh != last_jh);
+ }
} while (transaction != last_transaction);
out:
return ret;
* buffer updates committed in that transaction have safely been stored
* elsewhere on disk. To achieve this, all of the buffers in a
* transaction need to be maintained on the transaction's checkpoint
- * lists until they have been rewritten, at which point this function is
+ * list until they have been rewritten, at which point this function is
* called to remove the buffer from the existing transaction's
- * checkpoint lists.
- *
- * The function returns 1 if it frees the transaction, 0 otherwise.
+ * checkpoint list.
*
* This function is called with the journal locked.
* This function is called with j_list_lock held.
- * This function is called with jbd_lock_bh_state(jh2bh(jh))
*/
-int __journal_remove_checkpoint(struct journal_head *jh)
+void __journal_remove_checkpoint(struct journal_head *jh)
{
transaction_t *transaction;
journal_t *journal;
- int ret = 0;
JBUFFER_TRACE(jh, "entry");
journal = transaction->t_journal;
__buffer_unlink(jh);
- jh->b_cp_transaction = NULL;
- if (transaction->t_checkpoint_list != NULL ||
- transaction->t_checkpoint_io_list != NULL)
+ if (transaction->t_checkpoint_list != NULL)
goto out;
JBUFFER_TRACE(jh, "transaction has no more buffers");
/* Just in case anybody was waiting for more transactions to be
checkpointed... */
wake_up(&journal->j_wait_logspace);
- ret = 1;
out:
JBUFFER_TRACE(jh, "exit");
- return ret;
}
/*
J_ASSERT(transaction->t_shadow_list == NULL);
J_ASSERT(transaction->t_log_list == NULL);
J_ASSERT(transaction->t_checkpoint_list == NULL);
- J_ASSERT(transaction->t_checkpoint_io_list == NULL);
J_ASSERT(transaction->t_updates == 0);
J_ASSERT(journal->j_committing_transaction != transaction);
J_ASSERT(journal->j_running_transaction != transaction);
journal->j_committing_transaction = NULL;
spin_unlock(&journal->j_state_lock);
- if (commit_transaction->t_checkpoint_list == NULL &&
- commit_transaction->t_checkpoint_io_list == NULL) {
+ if (commit_transaction->t_checkpoint_list == NULL) {
__journal_drop_transaction(journal, commit_transaction);
} else {
if (journal->j_checkpoint_transactions == NULL) {
/*
* The server lockd has called us back to tell us the lock was granted
*/
-u32
-nlmclnt_grant(struct nlm_lock *lock)
+u32 nlmclnt_grant(const struct sockaddr_in *addr, const struct nlm_lock *lock)
{
+ const struct file_lock *fl = &lock->fl;
+ const struct nfs_fh *fh = &lock->fh;
struct nlm_wait *block;
u32 res = nlm_lck_denied;
* Warning: must not use cookie to match it!
*/
list_for_each_entry(block, &nlm_blocked, b_list) {
- if (nlm_compare_locks(block->b_lock, &lock->fl)) {
- /* Alright, we found a lock. Set the return status
- * and wake up the caller
- */
- block->b_status = NLM_LCK_GRANTED;
- wake_up(&block->b_wait);
- res = nlm_granted;
- }
+ struct file_lock *fl_blocked = block->b_lock;
+
+ if (!nlm_compare_locks(fl_blocked, fl))
+ continue;
+ if (!nlm_cmp_addr(&block->b_host->h_addr, addr))
+ continue;
+ if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_dentry->d_inode) ,fh) != 0)
+ continue;
+ /* Alright, we found a lock. Set the return status
+ * and wake up the caller
+ */
+ block->b_status = NLM_LCK_GRANTED;
+ wake_up(&block->b_wait);
+ res = nlm_granted;
}
return res;
}
resp->cookie = argp->cookie;
dprintk("lockd: GRANTED called\n");
- resp->status = nlmclnt_grant(&argp->lock);
+ resp->status = nlmclnt_grant(&rqstp->rq_addr, &argp->lock);
dprintk("lockd: GRANTED status %d\n", ntohl(resp->status));
return rpc_success;
}
resp->cookie = argp->cookie;
dprintk("lockd: GRANTED called\n");
- resp->status = nlmclnt_grant(&argp->lock);
+ resp->status = nlmclnt_grant(&rqstp->rq_addr, &argp->lock);
dprintk("lockd: GRANTED status %d\n", ntohl(resp->status));
return rpc_success;
}
#define DLM_LOCK_RES_IN_PROGRESS 0x00000010
#define DLM_LOCK_RES_MIGRATING 0x00000020
+/* max milliseconds to wait to sync up a network failure with a node death */
+#define DLM_NODE_DEATH_WAIT_MAX (5 * 1000)
+
#define DLM_PURGE_INTERVAL_MS (8 * 1000)
struct dlm_lock_resource
void dlm_complete_recovery_thread(struct dlm_ctxt *dlm);
void dlm_wait_for_recovery(struct dlm_ctxt *dlm);
int dlm_is_node_dead(struct dlm_ctxt *dlm, u8 node);
+int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout);
void dlm_put(struct dlm_ctxt *dlm);
struct dlm_ctxt *dlm_grab(struct dlm_ctxt *dlm);
} else {
mlog_errno(tmpret);
if (dlm_is_host_down(tmpret)) {
+ /* instead of logging the same network error over
+ * and over, sleep here and wait for the heartbeat
+ * to notice the node is dead. times out after 5s. */
+ dlm_wait_for_node_death(dlm, res->owner,
+ DLM_NODE_DEATH_WAIT_MAX);
ret = DLM_RECOVERING;
mlog(0, "node %u died so returning DLM_RECOVERING "
"from convert message!\n", res->owner);
struct dlm_lockstatus *lksb;
enum dlm_status status = DLM_NORMAL;
u32 flags;
- int call_ast = 0, kick_thread = 0;
+ int call_ast = 0, kick_thread = 0, ast_reserved = 0;
if (!dlm_grab(dlm)) {
dlm_error(DLM_REJECTED);
status = __dlm_lockres_state_to_status(res);
if (status == DLM_NORMAL) {
__dlm_lockres_reserve_ast(res);
+ ast_reserved = 1;
res->state |= DLM_LOCK_RES_IN_PROGRESS;
status = __dlmconvert_master(dlm, res, lock, flags,
cnv->requested_type,
else
dlm_lock_put(lock);
- /* either queue the ast or release it */
+ /* either queue the ast or release it, if reserved */
if (call_ast)
dlm_queue_ast(dlm, lock);
- else
+ else if (ast_reserved)
dlm_lockres_release_ast(dlm, res);
if (kick_thread)
dlm_error(status);
dlm_revert_pending_lock(res, lock);
dlm_lock_put(lock);
+ } else if (dlm_is_recovery_lock(res->lockname.name,
+ res->lockname.len)) {
+ /* special case for the $RECOVERY lock.
+ * there will never be an AST delivered to put
+ * this lock on the proper secondary queue
+ * (granted), so do it manually. */
+ mlog(0, "%s: $RECOVERY lock for this node (%u) is "
+ "mastered by %u; got lock, manually granting (no ast)\n",
+ dlm->name, dlm->node_num, res->owner);
+ list_del_init(&lock->list);
+ list_add_tail(&lock->list, &res->granted);
}
spin_unlock(&res->spinlock);
mlog(0, "retrying lock with migration/"
"recovery/in progress\n");
msleep(100);
- dlm_wait_for_recovery(dlm);
+ /* no waiting for dlm_reco_thread */
+ if (recovery) {
+ if (status == DLM_RECOVERING) {
+ mlog(0, "%s: got RECOVERING "
+ "for $REOCVERY lock, master "
+ "was %u\n", dlm->name,
+ res->owner);
+ dlm_wait_for_node_death(dlm, res->owner,
+ DLM_NODE_DEATH_WAIT_MAX);
+ }
+ } else {
+ dlm_wait_for_recovery(dlm);
+ }
goto retry_lock;
}
atomic_set(&mle->woken, 1);
spin_unlock(&mle->spinlock);
wake_up(&mle->wq);
- /* final put will take care of list removal */
+ /* do not need events any longer, so detach
+ * from heartbeat */
+ __dlm_mle_detach_hb_events(dlm, mle);
__dlm_put_mle(mle);
}
continue;
spin_unlock(&res->spinlock);
dlm_lockres_put(res);
+ /* about to get rid of mle, detach from heartbeat */
+ __dlm_mle_detach_hb_events(dlm, mle);
+
/* dump the mle */
spin_lock(&dlm->master_lock);
__dlm_put_mle(mle);
return dead;
}
+int dlm_wait_for_node_death(struct dlm_ctxt *dlm, u8 node, int timeout)
+{
+ if (timeout) {
+ mlog(ML_NOTICE, "%s: waiting %dms for notification of "
+ "death of node %u\n", dlm->name, timeout, node);
+ wait_event_timeout(dlm->dlm_reco_thread_wq,
+ dlm_is_node_dead(dlm, node),
+ msecs_to_jiffies(timeout));
+ } else {
+ mlog(ML_NOTICE, "%s: waiting indefinitely for notification "
+ "of death of node %u\n", dlm->name, node);
+ wait_event(dlm->dlm_reco_thread_wq,
+ dlm_is_node_dead(dlm, node));
+ }
+ /* for now, return 0 */
+ return 0;
+}
+
/* callers of the top-level api calls (dlmlock/dlmunlock) should
* block on the dlm->reco.event when recovery is in progress.
* the dlm recovery thread will set this state when it begins
dlm->reco.new_master);
status = -EEXIST;
} else {
+ status = 0;
+
+ /* see if recovery was already finished elsewhere */
+ spin_lock(&dlm->spinlock);
+ if (dlm->reco.dead_node == O2NM_INVALID_NODE_NUM) {
+ status = -EINVAL;
+ mlog(0, "%s: got reco EX lock, but "
+ "node got recovered already\n", dlm->name);
+ if (dlm->reco.new_master != O2NM_INVALID_NODE_NUM) {
+ mlog(ML_ERROR, "%s: new master is %u "
+ "but no dead node!\n",
+ dlm->name, dlm->reco.new_master);
+ BUG();
+ }
+ }
+ spin_unlock(&dlm->spinlock);
+ }
+
+ /* if this node has actually become the recovery master,
+ * set the master and send the messages to begin recovery */
+ if (!status) {
+ mlog(0, "%s: dead=%u, this=%u, sending "
+ "begin_reco now\n", dlm->name,
+ dlm->reco.dead_node, dlm->node_num);
status = dlm_send_begin_reco_message(dlm,
dlm->reco.dead_node);
/* this always succeeds */
while (!(kthread_should_stop() &&
atomic_read(&journal->j_num_trans) == 0)) {
- wait_event_interruptible_timeout(osb->checkpoint_event,
- atomic_read(&journal->j_num_trans)
- || kthread_should_stop(),
- OCFS2_CHECKPOINT_INTERVAL);
+ wait_event_interruptible(osb->checkpoint_event,
+ atomic_read(&journal->j_num_trans)
+ || kthread_should_stop());
status = ocfs2_commit_cache(osb);
if (status < 0)
#include <linux/fs.h>
#include <linux/jbd.h>
-#define OCFS2_CHECKPOINT_INTERVAL (8 * HZ)
-
enum ocfs2_journal_state {
OCFS2_JOURNAL_FREE = 0,
OCFS2_JOURNAL_LOADED,
"reiserfs: cannot support attributes until flag is set in super-block");
REISERFS_SB(s)->s_mount_opt &= ~(1 << REISERFS_ATTRS);
}
- } else if (le32_to_cpu(rs->s_flags) & reiserfs_attrs_cleared) {
- REISERFS_SB(s)->s_mount_opt |= (1 << REISERFS_ATTRS);
}
}
acl = ERR_PTR(retval);
} else {
acl = posix_acl_from_disk(value, retval);
- *p_acl = posix_acl_dup(acl);
+ if (!IS_ERR(acl))
+ *p_acl = posix_acl_dup(acl);
}
kfree(value);
ret = core_sys_select(n, inp, outp, exp, &timeout);
if (tvp) {
+ struct timeval rtv;
+
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
- tv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
- tv.tv_sec = timeout;
- if (copy_to_user(tvp, &tv, sizeof(tv))) {
+ rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
+ rtv.tv_sec = timeout;
+ if (timeval_compare(&rtv, &tv) < 0)
+ rtv = tv;
+ if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
sticky:
/*
* If an application puts its timeval in read-only
ret = core_sys_select(n, inp, outp, exp, &timeout);
if (tsp) {
+ struct timespec rts;
+
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
- ts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) * 1000;
- ts.tv_sec = timeout;
- if (copy_to_user(tsp, &ts, sizeof(ts))) {
+ rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
+ 1000;
+ rts.tv_sec = timeout;
+ if (timespec_compare(&rts, &ts) < 0)
+ rts = ts;
+ if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
if (tsp && timeout >= 0) {
+ struct timespec rts;
+
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
/* Yes, we know it's actually an s64, but it's also positive. */
- ts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) * 1000;
- ts.tv_sec = timeout;
- if (copy_to_user(tsp, &ts, sizeof(ts))) {
+ rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
+ 1000;
+ rts.tv_sec = timeout;
+ if (timespec_compare(&rts, &ts) < 0)
+ rts = ts;
+ if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
return error;
}
+#ifndef __ARCH_WANT_STAT64
asmlinkage long sys_newfstatat(int dfd, char __user *filename,
struct stat __user *statbuf, int flag)
{
out:
return error;
}
+#endif
asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf)
{
return error;
}
+asmlinkage long sys_fstatat64(int dfd, char __user *filename,
+ struct stat64 __user *statbuf, int flag)
+{
+ struct kstat stat;
+ int error = -EINVAL;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (flag & AT_SYMLINK_NOFOLLOW)
+ error = vfs_lstat_fd(dfd, filename, &stat);
+ else
+ error = vfs_stat_fd(dfd, filename, &stat);
+
+ if (!error)
+ error = cp_new_stat64(&stat, statbuf);
+
+out:
+ return error;
+}
#endif /* __ARCH_WANT_STAT64 */
void inode_add_bytes(struct inode *inode, loff_t bytes)
#define MADV_WILLNEED 3 /* will need these pages */
#define MADV_SPACEAVAIL 5 /* ensure resources are available */
#define MADV_DONTNEED 6 /* don't need these pages */
-#define MADV_REMOVE 7 /* remove these pages & resources */
+
+/* common/generic parameters */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
/* compatibility flags */
#define MAP_ANON MAP_ANONYMOUS
--- /dev/null
+/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
+ *
+ * (c) 2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * iPAQ H1940 series - latch definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_LATCH_H
+#define __ASM_ARCH_H1940_LATCH_H
+
+
+#ifndef __ASSEMBLY__
+#define H1940_LATCH ((void __iomem *)0xF8000000)
+#else
+#define H1940_LATCH 0xF8000000
+#endif
+
+#define H1940_PA_LATCH (S3C2410_CS2)
+
+/* SD layer latch */
+
+#define H1940_LATCH_SDQ1 (1<<16)
+#define H1940_LATCH_LCD_P1 (1<<17)
+#define H1940_LATCH_LCD_P2 (1<<18)
+#define H1940_LATCH_LCD_P3 (1<<19)
+#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */
+#define H1940_LATCH_LED_RED (1<<21)
+#define H1940_LATCH_SDQ7 (1<<22)
+#define H1940_LATCH_USB_DP (1<<23)
+
+/* CPU layer latch */
+
+#define H1940_LATCH_UDA_POWER (1<<24)
+#define H1940_LATCH_AUDIO_POWER (1<<25)
+#define H1940_LATCH_SM803_ENABLE (1<<26)
+#define H1940_LATCH_LCD_P4 (1<<27)
+#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */
+#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */
+#define H1940_LATCH_LED_GREEN (1<<30)
+#define H1940_LATCH_LED_FLASH (1<<31)
+
+/* default settings */
+
+#define H1940_LATCH_DEFAULT \
+ H1940_LATCH_LCD_P4 | \
+ H1940_LATCH_SM803_ENABLE | \
+ H1940_LATCH_SDQ1 | \
+ H1940_LATCH_LCD_P1 | \
+ H1940_LATCH_LCD_P2 | \
+ H1940_LATCH_LCD_P3 | \
+ H1940_LATCH_MAX1698_nSHUTDOWN | \
+ H1940_LATCH_CPUQ5
+
+/* control functions */
+
+extern void h1940_latch_control(unsigned int clear, unsigned int set);
+
+#endif /* __ASM_ARCH_H1940_LATCH_H */
#ifndef __ARM_MMAN_H__
#define __ARM_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __ARM_MMAN_H__ */
#ifndef __ARM_MMAN_H__
#define __ARM_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __ARM_MMAN_H__ */
/* verbatim copy of asm-i386/ version */
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __CRIS_MMAN_H__ */
switch (sizeof(__xg_orig)) { \
case 4: \
asm volatile( \
- "swap%I0 %2,%M0" \
- : "+m"(*__xg_ptr), "=&r"(__xg_orig) \
- : "r"(x) \
+ "swap%I0 %M0,%1" \
+ : "+m"(*__xg_ptr), "=r"(__xg_orig) \
+ : "1"(x) \
: "memory" \
); \
break; \
flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE);
}
+/*
+ * permit ptrace to access another process's address space through the icache
+ * and the dcache
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+ memcpy((dst), (src), (len)); \
+ flush_icache_user_range((vma), (page), (vaddr), (len)); \
+} while(0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy((dst), (src), (len))
#endif /* _ASM_CACHEFLUSH_H */
#define IOMAP_WRITETHROUGH 3
extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-extern void __iounmap(void __iomem *addr, unsigned long size);
static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
{
#ifndef __ASM_MMAN_H__
#define __ASM_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __ASM_MMAN_H__ */
#define TBR_TT_TRAP0 (0x80 << 4)
#define TBR_TT_TRAP1 (0x81 << 4)
#define TBR_TT_TRAP2 (0x82 << 4)
+#define TBR_TT_TRAP3 (0x83 << 4)
#define TBR_TT_TRAP126 (0xfe << 4)
#define TBR_TT_BREAK (0xff << 4)
/*
* interrupt flag manipulation
+ * - use virtual interrupt management since touching the PSR is slow
+ * - ICC2.Z: T if interrupts virtually disabled
+ * - ICC2.C: F if interrupts really disabled
+ * - if Z==1 upon interrupt:
+ * - C is set to 0
+ * - interrupts are really disabled
+ * - entry.S returns immediately
+ * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts
+ * - if taken, the trap:
+ * - sets ICC2.C
+ * - enables interrupts
*/
-#define local_irq_disable() \
+#define local_irq_disable() \
+do { \
+ /* set Z flag, but don't change the C flag */ \
+ asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \
+ : \
+ : \
+ : "memory", "icc2" \
+ ); \
+} while(0)
+
+#define local_irq_enable() \
+do { \
+ /* clear Z flag and then test the C flag */ \
+ asm volatile(" oricc gr0,#1,gr0,icc2 \n" \
+ " tihi icc2,gr0,#2 \n" \
+ : \
+ : \
+ : "memory", "icc2" \
+ ); \
+} while(0)
+
+#define local_save_flags(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ asm volatile("movsg ccr,%0" \
+ : "=r"(flags) \
+ : \
+ : "memory"); \
+ \
+ /* shift ICC2.Z to bit 0 */ \
+ flags >>= 26; \
+ \
+ /* make flags 1 if interrupts disabled, 0 otherwise */ \
+ flags &= 1UL; \
+} while(0)
+
+#define irqs_disabled() \
+ ({unsigned long flags; local_save_flags(flags); flags; })
+
+#define local_irq_save(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ local_save_flags(flags); \
+ local_irq_disable(); \
+} while(0)
+
+#define local_irq_restore(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ \
+ /* load the Z flag by turning 1 if disabled into 0 if disabled \
+ * and thus setting the Z flag but not the C flag */ \
+ asm volatile(" xoricc %0,#1,gr0,icc2 \n" \
+ /* then test Z=0 and C=0 */ \
+ " tihi icc2,gr0,#2 \n" \
+ : \
+ : "r"(flags) \
+ : "memory", "icc2" \
+ ); \
+ \
+} while(0)
+
+/*
+ * real interrupt flag manipulation
+ */
+#define __local_irq_disable() \
do { \
unsigned long psr; \
asm volatile(" movsg psr,%0 \n" \
: "memory"); \
} while(0)
-#define local_irq_enable() \
+#define __local_irq_enable() \
do { \
unsigned long psr; \
asm volatile(" movsg psr,%0 \n" \
: "memory"); \
} while(0)
-#define local_save_flags(flags) \
+#define __local_save_flags(flags) \
do { \
typecheck(unsigned long, flags); \
asm("movsg psr,%0" \
: "memory"); \
} while(0)
-#define local_irq_save(flags) \
+#define __local_irq_save(flags) \
do { \
unsigned long npsr; \
typecheck(unsigned long, flags); \
: "memory"); \
} while(0)
-#define local_irq_restore(flags) \
+#define __local_irq_restore(flags) \
do { \
typecheck(unsigned long, flags); \
asm volatile(" movgs %0,psr \n" \
: "memory"); \
} while(0)
-#define irqs_disabled() \
+#define __irqs_disabled() \
((__get_PSR() & PSR_PIL) >= PSR_PIL_14)
/*
extern unsigned long search_exception_table(unsigned long addr);
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) memcpy(dst, src, len)
-
#endif /* _ASM_UACCESS_H */
#define __NR_add_key 286
#define __NR_request_key 287
#define __NR_keyctl 288
-#define __NR_vperfctr_open 289
-#define __NR_vperfctr_control (__NR_perfctr_info+1)
-#define __NR_vperfctr_unlink (__NR_perfctr_info+2)
-#define __NR_vperfctr_iresume (__NR_perfctr_info+3)
-#define __NR_vperfctr_read (__NR_perfctr_info+4)
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
+#define __NR_inotify_init 291
+#define __NR_inotify_add_watch 292
+#define __NR_inotify_rm_watch 293
+#define __NR_migrate_pages 294
+#define __NR_openat 295
+#define __NR_mkdirat 296
+#define __NR_mknodat 297
+#define __NR_fchownat 298
+#define __NR_futimesat 299
+#define __NR_newfstatat 300
+#define __NR_unlinkat 301
+#define __NR_renameat 302
+#define __NR_linkat 303
+#define __NR_symlinkat 304
+#define __NR_readlinkat 305
+#define __NR_fchmodat 306
+#define __NR_faccessat 307
+#define __NR_pselect6 308
+#define __NR_ppoll 309
-#define NR_syscalls 294
+#define NR_syscalls 310
/*
* process the return value of a syscall, consigning it to one of two possible fates
--- /dev/null
+#ifndef _ASM_GENERIC_MMAN_H
+#define _ASM_GENERIC_MMAN_H
+
+/*
+ Author: Michael S. Tsirkin <mst@mellanox.co.il>, Mellanox Technologies Ltd.
+ Based on: asm-xxx/mman.h
+*/
+
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED 0x01 /* Share changes */
+#define MAP_PRIVATE 0x02 /* Changes are private */
+#define MAP_TYPE 0x0f /* Mask for type of mapping */
+#define MAP_FIXED 0x10 /* Interpret addr exactly */
+#define MAP_ANONYMOUS 0x20 /* don't use a file */
+
+#define MS_ASYNC 1 /* sync memory asynchronously */
+#define MS_INVALIDATE 2 /* invalidate the caches */
+#define MS_SYNC 4 /* synchronous memory sync */
+
+#define MADV_NORMAL 0 /* no further special treatment */
+#define MADV_RANDOM 1 /* expect random page references */
+#define MADV_SEQUENTIAL 2 /* expect sequential page references */
+#define MADV_WILLNEED 3 /* will need these pages */
+#define MADV_DONTNEED 4 /* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
+
+/* compatibility flags */
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
+
+#endif
#ifndef __H8300_MMAN_H__
#define __H8300_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __H8300_MMAN_H__ */
#ifndef __I386_MMAN_H__
#define __I386_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __I386_MMAN_H__ */
#ifndef _ASM_I386_TOPOLOGY_H
#define _ASM_I386_TOPOLOGY_H
-#ifdef CONFIG_SMP
+#ifdef CONFIG_X86_HT
#define topology_physical_package_id(cpu) \
(phys_proc_id[cpu] == BAD_APICID ? -1 : phys_proc_id[cpu])
#define topology_core_id(cpu) \
#define __NR_mknodat 297
#define __NR_fchownat 298
#define __NR_futimesat 299
-#define __NR_newfstatat 300
+#define __NR_fstatat64 300
#define __NR_unlinkat 301
#define __NR_renameat 302
#define __NR_linkat 303
* David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
*/
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x00100 /* stack-like segment */
#define MAP_GROWSUP 0x00200 /* register stack-like segment */
#define MAP_POPULATE 0x08000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* _ASM_IA64_MMAN_H */
#define __NR_inotify_add_watch 1278
#define __NR_inotify_rm_watch 1279
#define __NR_migrate_pages 1280
+#define __NR_openat 1281
+#define __NR_mkdirat 1282
+#define __NR_mknodat 1283
+#define __NR_fchownat 1284
+#define __NR_futimesat 1285
+#define __NR_newfstatat 1286
+#define __NR_unlinkat 1287
+#define __NR_renameat 1288
+#define __NR_linkat 1289
+#define __NR_symlinkat 1290
+#define __NR_readlinkat 1291
+#define __NR_fchmodat 1292
+#define __NR_faccessat 1293
+/* 1294, 1295 reserved for pselect/ppoll */
+#define __NR_unshare 1296
#ifdef __KERNEL__
#include <linux/config.h>
-#define NR_syscalls 270 /* length of syscall table */
+#define NR_syscalls 273 /* length of syscall table */
#define __ARCH_WANT_SYS_RT_SIGACTION
#ifndef __M32R_MMAN_H__
#define __M32R_MMAN_H__
-/* orig : i386 2.6.0-test6 */
-
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+#include <asm-generic/mman.h>
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+/* orig : i386 2.6.0-test6 */
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __M32R_MMAN_H__ */
#ifndef __M68K_MMAN_H__
#define __M68K_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __M68K_MMAN_H__ */
*/
#define MIPS_CPU_ISA_I 0x00000001
#define MIPS_CPU_ISA_II 0x00000002
-#define MIPS_CPU_ISA_III 0x00000003
-#define MIPS_CPU_ISA_IV 0x00000004
-#define MIPS_CPU_ISA_V 0x00000005
+#define MIPS_CPU_ISA_III 0x00000004
+#define MIPS_CPU_ISA_IV 0x00000008
+#define MIPS_CPU_ISA_V 0x00000010
#define MIPS_CPU_ISA_M32R1 0x00000020
#define MIPS_CPU_ISA_M32R2 0x00000040
#define MIPS_CPU_ISA_M64R1 0x00000080
+++ /dev/null
-/*
- * include/sgidefs.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996 by Ralf Baechle
- *
- * This file is here to satisfy GCC's expectations.
- */
-#ifndef __SGIDEFS_H
-#define __SGIDEFS_H
-
-#include <asm/sgidefs.h>
-
-#endif /* __SGIDEFS_H */
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 by Ralf Baechle
+ * Copyright (C) 2003, 2005 by Ralf Baechle
*/
#ifndef __ASM_MACH_GENERIC_TIMEX_H
#define __ASM_MACH_GENERIC_TIMEX_H
-#include <linux/config.h>
-
-/*
- * Last remaining user of the i8254 PIC, will be converted, too ...
- */
-#ifdef CONFIG_SNI_RM200_PCI
-#define CLOCK_TICK_RATE 1193182
-#else
#define CLOCK_TICK_RATE 500000
-#endif
#endif /* __ASM_MACH_GENERIC_TIMEX_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2005 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_RM200_TIMEX_H
+#define __ASM_MACH_RM200_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193182
+
+#endif /* __ASM_MACH_RM200_TIMEX_H */
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
+#define MADV_NORMAL 0 /* no further special treatment */
+#define MADV_RANDOM 1 /* expect random page references */
+#define MADV_SEQUENTIAL 2 /* expect sequential page references */
+#define MADV_WILLNEED 3 /* will need these pages */
+#define MADV_DONTNEED 4 /* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
#endif /* _ASM_MMAN_H */
#include <asm/asm.h>
#include <asm/cacheops.h>
+#include <asm/cpu-features.h>
/*
* This macro return a properly sign-extended address suitable as base address
cache_op(Hit_Writeback_Inv_SD, addr);
}
+#define protected_cache_op(op,addr) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+ " .set noreorder \n" \
+ " .set mips3 \n" \
+ "1: cache %0, (%1) \n" \
+ "2: .set pop \n" \
+ " .section __ex_table,\"a\" \n" \
+ " "STR(PTR)" 1b, 2b \n" \
+ " .previous" \
+ : \
+ : "i" (op), "r" (addr))
+
/*
* The next two are for badland addresses like signal trampolines.
*/
static inline void protected_flush_icache_line(unsigned long addr)
{
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " .set mips3 \n"
- "1: cache %0, (%1) \n"
- "2: .set pop \n"
- " .section __ex_table,\"a\" \n"
- " "STR(PTR)" 1b, 2b \n"
- " .previous"
- :
- : "i" (Hit_Invalidate_I), "r" (addr));
+ protected_cache_op(Hit_Invalidate_I, addr);
}
/*
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " .set mips3 \n"
- "1: cache %0, (%1) \n"
- "2: .set pop \n"
- " .section __ex_table,\"a\" \n"
- " "STR(PTR)" 1b, 2b \n"
- " .previous"
- :
- : "i" (Hit_Writeback_Inv_D), "r" (addr));
+ protected_cache_op(Hit_Writeback_Inv_D, addr);
}
static inline void protected_writeback_scache_line(unsigned long addr)
{
- __asm__ __volatile__(
- " .set push \n"
- " .set noreorder \n"
- " .set mips3 \n"
- "1: cache %0, (%1) \n"
- "2: .set pop \n"
- " .section __ex_table,\"a\" \n"
- " "STR(PTR)" 1b, 2b \n"
- " .previous"
- :
- : "i" (Hit_Writeback_Inv_SD), "r" (addr));
+ protected_cache_op(Hit_Writeback_Inv_SD, addr);
}
/*
__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+/* build blast_xxx_range, protected_blast_xxx_range */
+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
+static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+ unsigned long end) \
+{ \
+ unsigned long lsize = cpu_##desc##_line_size(); \
+ unsigned long addr = start & ~(lsize - 1); \
+ unsigned long aend = (end - 1) & ~(lsize - 1); \
+ while (1) { \
+ prot##cache_op(hitop, addr); \
+ if (addr == aend) \
+ break; \
+ addr += lsize; \
+ } \
+}
+
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
+/* blast_inv_dcache_range */
+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+
#endif /* _ASM_R4KCACHE_H */
*/
#define __get_user_asm_ll32(val, addr) \
{ \
+ unsigned long long __gu_tmp; \
+ \
__asm__ __volatile__( \
"1: lw %1, (%3) \n" \
"2: lw %D1, 4(%3) \n" \
" " __UA_ADDR " 1b, 4b \n" \
" " __UA_ADDR " 2b, 4b \n" \
" .previous \n" \
- : "=r" (__gu_err), "=&r" (val) \
+ : "=r" (__gu_err), "=&r" (__gu_tmp) \
: "0" (0), "r" (addr), "i" (-EFAULT)); \
+ (val) = __gu_tmp; \
}
/*
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
-# ifndef __mips64
-# define __ARCH_WANT_STAT64
-# endif
# ifdef CONFIG_32BIT
+# define __ARCH_WANT_STAT64
# define __ARCH_WANT_SYS_TIME
# endif
# ifdef CONFIG_MIPS32_O32
#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */
#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */
#define MADV_VPS_INHERIT 7 /* Inherit parents page size */
-#define MADV_REMOVE 8 /* remove these pages & resources */
+
+/* common/generic parameters */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
/* The range 12-64 is reserved for page size specification. */
#define MADV_4K_PAGES 12 /* Use 4K pages */
#ifndef _ASM_POWERPC_MMAN_H
#define _ASM_POWERPC_MMAN_H
+#include <asm-generic/mman.h>
+
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* 2 of the License, or (at your option) any later version.
*/
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */
#define MAP_NORESERVE 0x40 /* don't reserve swap pages */
#define MAP_LOCKED 0x80
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */
#define MCL_FUTURE 0x4000 /* lock all additions to address space */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* _ASM_POWERPC_MMAN_H */
#define __NR_spu_create 279
#define __NR_pselect6 280
#define __NR_ppoll 281
+#define __NR_unshare 282
-#define __NR_syscalls 282
+#define __NR_syscalls 283
#ifdef __KERNEL__
#define __NR__exit __NR_exit
static inline int
__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
- return ((((volatile char *) addr)
- [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7)))) != 0;
+ return (((volatile char *) addr)
+ [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0;
}
#define test_bit(nr,addr) \
#ifndef __S390_MMAN_H__
#define __S390_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __S390_MMAN_H__ */
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
+#ifdef __KERNEL__
+
#include <asm/types.h>
#define PARMAREA 0x10400
IPL_PARMBLOCK_ORIGIN)
#define IPL_PARMBLOCK_SIZE (IPL_PARMBLOCK_START->hdr.length)
-#else
+#else /* __ASSEMBLY__ */
#ifndef __s390x__
#define IPL_DEVICE 0x10404
#endif /* __s390x__ */
#define COMMAND_LINE 0x10480
-#endif
-
-#endif
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_SETUP_H */
func(info);
return 0;
}
+#define smp_cpu_not_running(cpu) 1
#define smp_get_cpu(cpu) ({ 0; })
#define smp_put_cpu(cpu) ({ 0; })
#endif
#define __NR_mknodat 290
#define __NR_fchownat 291
#define __NR_futimesat 292
-#define __NR_newfstatat 293
+#define __NR_fstatat64 293
#define __NR_unlinkat 294
#define __NR_renameat 295
#define __NR_linkat 296
#define __NR_faccessat 300
#define __NR_pselect6 301
#define __NR_ppoll 302
+#define __NR_unshare 303
-#define NR_syscalls 303
+#define NR_syscalls 304
/*
* There are some system calls that are not present on 64 bit, some
#undef __NR_fcntl64
#undef __NR_sendfile64
#undef __NR_fadvise64_64
+#undef __NR_fstatat64
#define __NR_select 142
#define __NR_getrlimit 191 /* SuS compliant getrlimit */
#define __NR_setgid 214
#define __NR_setfsuid 215
#define __NR_setfsgid 216
+#define __NR_newfstatat 293
#endif
#ifndef __ASM_SH_MMAN_H
#define __ASM_SH_MMAN_H
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __ASM_SH_MMAN_H */
#ifndef __SPARC_MMAN_H__
#define __SPARC_MMAN_H__
+#include <asm-generic/mman.h>
+
/* SunOS'ified... */
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */
#define MAP_NORESERVE 0x40 /* don't reserve swap pages */
#define MAP_INHERIT 0x80 /* SunOS doesn't do this, but... */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */
#define MCL_FUTURE 0x4000 /* lock all additions to address space */
#define MC_LOCKAS 5 /* Lock an entire address space of the calling process */
#define MC_UNLOCKAS 6 /* Unlock entire address space of calling process */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
#define MADV_FREE 0x5 /* (Solaris) contents can be freed */
-#define MADV_REMOVE 0x6 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
#endif /* __SPARC_MMAN_H__ */
#define __NR_mknodat 286
#define __NR_fchownat 287
#define __NR_futimesat 288
-#define __NR_newfstatat 289
+#define __NR_fstatat64 289
#define __NR_unlinkat 290
#define __NR_renameat 291
#define __NR_linkat 292
#ifndef __SPARC64_MMAN_H__
#define __SPARC64_MMAN_H__
+#include <asm-generic/mman.h>
+
/* SunOS'ified... */
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_SEM 0x8 /* page may be used for atomic ops */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */
#define MAP_NORESERVE 0x40 /* don't reserve swap pages */
#define MAP_INHERIT 0x80 /* SunOS doesn't do this, but... */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */
#define MCL_FUTURE 0x4000 /* lock all additions to address space */
#define MC_LOCKAS 5 /* Lock an entire address space of the calling process */
#define MC_UNLOCKAS 6 /* Unlock entire address space of calling process */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
#define MADV_FREE 0x5 /* (Solaris) contents can be freed */
-#define MADV_REMOVE 0x6 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
#endif /* __SPARC64_MMAN_H__ */
#define __NR_mknodat 286
#define __NR_fchownat 287
#define __NR_futimesat 288
-#define __NR_newfstatat 289
+#define __NR_fstatat64 289
#define __NR_unlinkat 290
#define __NR_renameat 291
#define __NR_linkat 292
#ifndef __V850_MMAN_H__
#define __V850_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
-
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
+#include <asm-generic/mman.h>
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
#define MAP_LOCKED 0x2000 /* pages are locked */
#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif /* __V850_MMAN_H__ */
extern int hpet_rtc_timer_init(void);
extern int oem_force_hpet_timer(void);
+extern int hpet_use_timer;
+
#ifdef CONFIG_HPET_EMULATE_RTC
extern int hpet_mask_rtc_irq_bit(unsigned long bit_mask);
extern int hpet_set_rtc_irq_bit(unsigned long bit_mask);
#define __NR_ia32_mknodat 297
#define __NR_ia32_fchownat 298
#define __NR_ia32_futimesat 299
-#define __NR_ia32_newfstatat 300
+#define __NR_ia32_fstatat64 300
#define __NR_ia32_unlinkat 301
#define __NR_ia32_renameat 302
#define __NR_ia32_linkat 303
#ifndef __X8664_MMAN_H__
#define __X8664_MMAN_H__
-#define PROT_READ 0x1 /* page can be read */
-#define PROT_WRITE 0x2 /* page can be written */
-#define PROT_EXEC 0x4 /* page can be executed */
-#define PROT_NONE 0x0 /* page can not be accessed */
-#define PROT_SEM 0x8
-#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
-#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+#include <asm-generic/mman.h>
-#define MAP_SHARED 0x01 /* Share changes */
-#define MAP_PRIVATE 0x02 /* Changes are private */
-#define MAP_TYPE 0x0f /* Mask for type of mapping */
-#define MAP_FIXED 0x10 /* Interpret addr exactly */
-#define MAP_ANONYMOUS 0x20 /* don't use a file */
#define MAP_32BIT 0x40 /* only give out 32bit addresses */
#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MS_ASYNC 1 /* sync memory asynchronously */
-#define MS_INVALIDATE 2 /* invalidate the caches */
-#define MS_SYNC 4 /* synchronous memory sync */
-
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
-
-/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
-
#endif
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
-#define MADV_NORMAL 0x0 /* default page-in behavior */
-#define MADV_RANDOM 0x1 /* page-in minimum required */
-#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
-#define MADV_WILLNEED 0x3 /* pre-fault pages */
-#define MADV_DONTNEED 0x4 /* discard these pages */
-#define MADV_REMOVE 0x5 /* remove these pages & resources */
+#define MADV_NORMAL 0 /* no further special treatment */
+#define MADV_RANDOM 1 /* expect random page references */
+#define MADV_SEQUENTIAL 2 /* expect sequential page references */
+#define MADV_WILLNEED 3 /* will need these pages */
+#define MADV_DONTNEED 4 /* don't need these pages */
+
+/* common parameters: try to keep these consistent across architectures */
+#define MADV_REMOVE 9 /* remove these pages & resources */
+#define MADV_DONTFORK 10 /* don't inherit across fork */
+#define MADV_DOFORK 11 /* do inherit across fork */
/* compatibility flags */
-#define MAP_ANON MAP_ANONYMOUS
-#define MAP_FILE 0
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
#endif /* _XTENSA_MMAN_H */
int get_compat_sigevent(struct sigevent *event,
const struct compat_sigevent __user *u_event);
+static inline int compat_timeval_compare(struct compat_timeval *lhs,
+ struct compat_timeval *rhs)
+{
+ if (lhs->tv_sec < rhs->tv_sec)
+ return -1;
+ if (lhs->tv_sec > rhs->tv_sec)
+ return 1;
+ return lhs->tv_usec - rhs->tv_usec;
+}
+
+static inline int compat_timespec_compare(struct compat_timespec *lhs,
+ struct compat_timespec *rhs)
+{
+ if (lhs->tv_sec < rhs->tv_sec)
+ return -1;
+ if (lhs->tv_sec > rhs->tv_sec)
+ return 1;
+ return lhs->tv_nsec - rhs->tv_nsec;
+}
+
#endif /* CONFIG_COMPAT */
#endif /* _LINUX_COMPAT_H */
* bitmap of size NR_CPUS.
*
* #ifdef CONFIG_HOTPLUG_CPU
- * cpu_possible_map - all NR_CPUS bits set
+ * cpu_possible_map - has bit 'cpu' set iff cpu is populatable
* cpu_present_map - has bit 'cpu' set iff cpu is populated
* cpu_online_map - has bit 'cpu' set iff cpu available to scheduler
* #else
*/
struct journal_head *t_checkpoint_list;
- /*
- * Doubly-linked circular list of all buffers submitted for IO while
- * checkpointing. [j_list_lock]
- */
- struct journal_head *t_checkpoint_io_list;
-
/*
* Doubly-linked circular list of temporary buffers currently undergoing
* IO in the log [j_list_lock]
/* Checkpoint list management */
int __journal_clean_checkpoint_list(journal_t *journal);
-int __journal_remove_checkpoint(struct journal_head *);
+void __journal_remove_checkpoint(struct journal_head *);
void __journal_insert_checkpoint(struct journal_head *, transaction_t *);
/* Buffer IO */
{
unsigned long flags;
spin_lock_irqsave(&t->buf.lock, flags);
- if (t->buf.tail != NULL)
+ if (t->buf.tail != NULL) {
t->buf.tail->active = 0;
+ t->buf.tail->commit = t->buf.tail->used;
+ }
spin_unlock_irqrestore(&t->buf.lock, flags);
schedule_work(&t->buf.work);
}
#include <linux/list.h>
#include <linux/linkage.h>
#include <linux/compat.h>
+#include <linux/ioport.h>
#include <asm/kexec.h>
/* Verify architecture specific macros are defined */
({ (ktime_t){ .tv64 = (kt).tv64 + (nsval) }; })
/* convert a timespec to ktime_t format: */
-#define timespec_to_ktime(ts) ktime_set((ts).tv_sec, (ts).tv_nsec)
+static inline ktime_t timespec_to_ktime(struct timespec ts)
+{
+ return ktime_set(ts.tv_sec, ts.tv_nsec);
+}
/* convert a timeval to ktime_t format: */
-#define timeval_to_ktime(tv) ktime_set((tv).tv_sec, (tv).tv_usec * 1000)
+static inline ktime_t timeval_to_ktime(struct timeval tv)
+{
+ return ktime_set(tv.tv_sec, tv.tv_usec * NSEC_PER_USEC);
+}
/* Map the ktime_t to timespec conversion to ns_to_timespec function */
#define ktime_to_timespec(kt) ns_to_timespec((kt).tv64)
int nlmclnt_prepare_block(struct nlm_rqst *req, struct nlm_host *host, struct file_lock *fl);
void nlmclnt_finish_block(struct nlm_rqst *req);
long nlmclnt_block(struct nlm_rqst *req, long timeout);
-u32 nlmclnt_grant(struct nlm_lock *);
+u32 nlmclnt_grant(const struct sockaddr_in *addr, const struct nlm_lock *);
void nlmclnt_recovery(struct nlm_host *, u32);
int nlmclnt_reclaim(struct nlm_host *, struct file_lock *);
int nlmclnt_setgrantargs(struct nlm_rqst *, struct nlm_lock *);
* Compare two host addresses (needs modifying for ipv6)
*/
static __inline__ int
-nlm_cmp_addr(struct sockaddr_in *sin1, struct sockaddr_in *sin2)
+nlm_cmp_addr(const struct sockaddr_in *sin1, const struct sockaddr_in *sin2)
{
return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
}
* When the second lock is of type F_UNLCK, this acts like a wildcard.
*/
static __inline__ int
-nlm_compare_locks(struct file_lock *fl1, struct file_lock *fl2)
+nlm_compare_locks(const struct file_lock *fl1, const struct file_lock *fl2)
{
return fl1->fl_pid == fl2->fl_pid
&& fl1->fl_start == fl2->fl_start
struct sk_buff **pskb,
struct net_device *indev,
struct net_device *outdev,
- int (*okfn)(struct sk_buff *), int thresh)
+ int (*okfn)(struct sk_buff *), int thresh,
+ int cond)
{
+ if (!cond)
+ return 1;
#ifndef CONFIG_NETFILTER_DEBUG
if (list_empty(&nf_hooks[pf][hook]))
return 1;
struct net_device *indev, struct net_device *outdev,
int (*okfn)(struct sk_buff *))
{
- return nf_hook_thresh(pf, hook, pskb, indev, outdev, okfn, INT_MIN);
+ return nf_hook_thresh(pf, hook, pskb, indev, outdev, okfn, INT_MIN, 1);
}
/* Activate hook; either okfn or kfree_skb called, unless a hook
#define NF_HOOK_THRESH(pf, hook, skb, indev, outdev, okfn, thresh) \
({int __ret; \
-if ((__ret=nf_hook_thresh(pf, hook, &(skb), indev, outdev, okfn, thresh)) == 1)\
+if ((__ret=nf_hook_thresh(pf, hook, &(skb), indev, outdev, okfn, thresh, 1)) == 1)\
+ __ret = (okfn)(skb); \
+__ret;})
+
+#define NF_HOOK_COND(pf, hook, skb, indev, outdev, okfn, cond) \
+({int __ret; \
+if ((__ret=nf_hook_thresh(pf, hook, &(skb), indev, outdev, okfn, INT_MIN, cond)) == 1)\
__ret = (okfn)(skb); \
__ret;})
#else /* !CONFIG_NETFILTER */
#define NF_HOOK(pf, hook, skb, indev, outdev, okfn) (okfn)(skb)
+#define NF_HOOK_COND(pf, hook, skb, indev, outdev, okfn, cond) (okfn)(skb)
static inline int nf_hook_thresh(int pf, unsigned int hook,
struct sk_buff **pskb,
struct net_device *indev,
struct net_device *outdev,
- int (*okfn)(struct sk_buff *), int thresh)
+ int (*okfn)(struct sk_buff *), int thresh,
+ int cond)
{
return okfn(*pskb);
}
struct net_device *indev, struct net_device *outdev,
int (*okfn)(struct sk_buff *))
{
- return okfn(*pskb);
+ return 1;
}
static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
struct flowi;
#ifdef __KERNEL__
extern int ip_route_me_harder(struct sk_buff **pskb);
-
+extern int ip_xfrm_me_harder(struct sk_buff **pskb);
#endif /*__KERNEL__*/
#endif /*__LINUX_IP_NETFILTER_H*/
/* finegrained unicast helpers: */
struct sock *netlink_getsockbyfilp(struct file *filp);
-int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, long timeo);
+int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
+ long timeo, struct sock *ssk);
void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
int netlink_sendskb(struct sock *sk, struct sk_buff *skb, int protocol);
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000 0x0185
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186
#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187
#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188
extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
extern int ptrace_attach(struct task_struct *tsk);
extern int ptrace_detach(struct task_struct *, unsigned int);
+extern void __ptrace_detach(struct task_struct *, unsigned int);
extern void ptrace_disable(struct task_struct *);
extern int ptrace_check_attach(struct task_struct *task, int kill);
extern int ptrace_request(struct task_struct *child, long request, long addr, long data);
int lock_depth; /* BKL lock depth */
-#if defined(CONFIG_SMP)
- int last_waker_cpu; /* CPU that last woke this task up */
-#if defined(__ARCH_WANT_UNLOCKED_CTXSW)
+#if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
int oncpu;
-#endif
#endif
int prio, static_prio;
struct list_head run_list;
extern void sigqueue_free(struct sigqueue *);
extern int send_sigqueue(int, struct sigqueue *, struct task_struct *);
extern int send_group_sigqueue(int, struct sigqueue *, struct task_struct *);
-extern int do_sigaction(int, const struct k_sigaction *, struct k_sigaction *);
+extern int do_sigaction(int, struct k_sigaction *, struct k_sigaction *);
extern int do_sigaltstack(const stack_t __user *, stack_t __user *, unsigned long);
/* These can be the second arg to send_sig_info/send_group_sig_info. */
int mode);
asmlinkage long sys_newfstatat(int dfd, char __user *filename,
struct stat __user *statbuf, int flag);
+asmlinkage long sys_fstatat64(int dfd, char __user *filename,
+ struct stat64 __user *statbuf, int flag);
asmlinkage long sys_readlinkat(int dfd, const char __user *path, char __user *buf,
int bufsiz);
asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
#define NSEC_PER_SEC 1000000000L
#define NSEC_PER_USEC 1000L
-static __inline__ int timespec_equal(struct timespec *a, struct timespec *b)
+static inline int timespec_equal(struct timespec *a, struct timespec *b)
{
return (a->tv_sec == b->tv_sec) && (a->tv_nsec == b->tv_nsec);
}
+/*
+ * lhs < rhs: return <0
+ * lhs == rhs: return 0
+ * lhs > rhs: return >0
+ */
+static inline int timespec_compare(struct timespec *lhs, struct timespec *rhs)
+{
+ if (lhs->tv_sec < rhs->tv_sec)
+ return -1;
+ if (lhs->tv_sec > rhs->tv_sec)
+ return 1;
+ return lhs->tv_nsec - rhs->tv_nsec;
+}
+
+static inline int timeval_compare(struct timeval *lhs, struct timeval *rhs)
+{
+ if (lhs->tv_sec < rhs->tv_sec)
+ return -1;
+ if (lhs->tv_sec > rhs->tv_sec)
+ return 1;
+ return lhs->tv_usec - rhs->tv_usec;
+}
+
extern unsigned long mktime(const unsigned int year, const unsigned int mon,
const unsigned int day, const unsigned int hour,
const unsigned int min, const unsigned int sec);
int used;
int size;
int active;
+ int commit;
+ int read;
/* Data points here */
unsigned long data[0];
};
{
unsigned long flags;
spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
+ if (tty->buf.tail != NULL) {
tty->buf.tail->active = 0;
+ tty->buf.tail->commit = tty->buf.tail->used;
+ }
spin_unlock_irqrestore(&tty->buf.lock, flags);
schedule_delayed_work(&tty->buf.work, 1);
}
#define RFCOMM_DEFAULT_MTU 127
#define RFCOMM_DEFAULT_CREDITS 7
-#define RFCOMM_MAX_L2CAP_MTU 1024
+#define RFCOMM_MAX_L2CAP_MTU 1013
#define RFCOMM_MAX_CREDITS 40
#define RFCOMM_SKB_HEAD_RESERVE 8
#define IPSKB_XFRM_TUNNEL_SIZE 2
#define IPSKB_XFRM_TRANSFORMED 4
#define IPSKB_FRAG_COMPLETE 8
+#define IPSKB_REROUTED 16
};
struct ipcm_cookie
#define IRDA_ASSERT_LABEL(label)
#endif /* CONFIG_IRDA_DEBUG */
-#define IRDA_WARNING(args...) printk(KERN_WARNING args)
-#define IRDA_MESSAGE(args...) printk(KERN_INFO args)
-#define IRDA_ERROR(args...) printk(KERN_ERR args)
+#define IRDA_WARNING(args...) do { if (net_ratelimit()) printk(KERN_WARNING args); } while (0)
+#define IRDA_MESSAGE(args...) do { if (net_ratelimit()) printk(KERN_INFO args); } while (0)
+#define IRDA_ERROR(args...) do { if (net_ratelimit()) printk(KERN_ERR args); } while (0)
/*
* Magic numbers used by Linux-IrDA. Random numbers which must be unique to
/* May be different when we get VFIR */
#define LAP_MAX_HEADER (LAP_ADDR_HEADER + LAP_CTRL_HEADER)
+/* Each IrDA device gets a random 32 bits IRLAP device address */
+#define LAP_ALEN 4
+
#define BROADCAST 0xffffffff /* Broadcast device address */
#define CBROADCAST 0xfe /* Connection broadcast address */
#define XID_FORMAT 0x01 /* Discovery XID format */
extern int xfrm_init_state(struct xfrm_state *x);
extern int xfrm4_rcv(struct sk_buff *skb);
extern int xfrm4_output(struct sk_buff *skb);
-extern int xfrm4_output_finish(struct sk_buff *skb);
extern int xfrm4_tunnel_register(struct xfrm_tunnel *handler);
extern int xfrm4_tunnel_deregister(struct xfrm_tunnel *handler);
extern int xfrm6_rcv_spi(struct sk_buff **pskb, u32 spi);
};
#define ISCSI_PARAM_MAX 14
-typedef uint64_t iscsi_sessionh_t; /* iSCSI Data-Path session handle */
-typedef uint64_t iscsi_connh_t; /* iSCSI Data-Path connection handle */
-
#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
#define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr)
#define hostdata_session(_hostdata) (iscsi_ptr(*(unsigned long *)_hostdata))
/* Used to obtain the PCI location of a device */
#define SCSI_IOCTL_GET_PCI 0x5387
+int scsi_execute_in_process_context(void (*fn)(void *data), void *data);
+
#endif /* _SCSI_SCSI_H */
int max_lun;
unsigned int max_conn;
unsigned int max_cmd_len;
- struct Scsi_Host *(*create_session) (struct scsi_transport_template *t,
- uint32_t initial_cmdsn);
- void (*destroy_session) (struct Scsi_Host *shost);
- struct iscsi_cls_conn *(*create_conn) (struct Scsi_Host *shost,
+ struct iscsi_cls_session *(*create_session)
+ (struct scsi_transport_template *t, uint32_t sn, uint32_t *sid);
+ void (*destroy_session) (struct iscsi_cls_session *session);
+ struct iscsi_cls_conn *(*create_conn) (struct iscsi_cls_session *sess,
uint32_t cid);
- int (*bind_conn) (iscsi_sessionh_t session, iscsi_connh_t conn,
+ int (*bind_conn) (struct iscsi_cls_session *session,
+ struct iscsi_cls_conn *cls_conn,
uint32_t transport_fd, int is_leading);
- int (*start_conn) (iscsi_connh_t conn);
- void (*stop_conn) (iscsi_connh_t conn, int flag);
+ int (*start_conn) (struct iscsi_cls_conn *conn);
+ void (*stop_conn) (struct iscsi_cls_conn *conn, int flag);
void (*destroy_conn) (struct iscsi_cls_conn *conn);
- int (*set_param) (iscsi_connh_t conn, enum iscsi_param param,
+ int (*set_param) (struct iscsi_cls_conn *conn, enum iscsi_param param,
uint32_t value);
- int (*get_conn_param) (void *conndata, enum iscsi_param param,
+ int (*get_conn_param) (struct iscsi_cls_conn *conn,
+ enum iscsi_param param,
uint32_t *value);
- int (*get_session_param) (struct Scsi_Host *shost,
+ int (*get_session_param) (struct iscsi_cls_session *session,
enum iscsi_param param, uint32_t *value);
- int (*send_pdu) (iscsi_connh_t conn, struct iscsi_hdr *hdr,
+ int (*send_pdu) (struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size);
- void (*get_stats) (iscsi_connh_t conn, struct iscsi_stats *stats);
+ void (*get_stats) (struct iscsi_cls_conn *conn,
+ struct iscsi_stats *stats);
};
/*
/*
* control plane upcalls
*/
-extern void iscsi_conn_error(iscsi_connh_t conn, enum iscsi_err error);
-extern int iscsi_recv_pdu(iscsi_connh_t conn, struct iscsi_hdr *hdr,
+extern void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error);
+extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size);
struct iscsi_cls_conn {
struct list_head conn_list; /* item in connlist */
void *dd_data; /* LLD private data */
struct iscsi_transport *transport;
- iscsi_connh_t connh;
int active; /* must be accessed with the connlock */
struct device dev; /* sysfs transport/container device */
struct mempool_zone *z_error;
container_of(_dev, struct iscsi_cls_conn, dev)
struct iscsi_cls_session {
- struct list_head list; /* item in session_list */
+ struct list_head sess_list; /* item in session_list */
struct iscsi_transport *transport;
struct device dev; /* sysfs transport/container device */
};
unsigned char PanelDispCntlReg1;
unsigned char PanelDispCntlReg2;
unsigned char PanelDispCntlReg3;
+ unsigned char PanelDispCntlRegRead;
unsigned char PanelVertCenterReg1;
unsigned char PanelVertCenterReg2;
unsigned char PanelVertCenterReg3;
extern char __initramfs_start[], __initramfs_end[];
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/initrd.h>
+#include <linux/kexec.h>
static void __init free_initrd(void)
{
- free_initrd_mem(initrd_start, initrd_end);
+#ifdef CONFIG_KEXEC
+ unsigned long crashk_start = (unsigned long)__va(crashk_res.start);
+ unsigned long crashk_end = (unsigned long)__va(crashk_res.end);
+
+ /*
+ * If the initrd region is overlapped with crashkernel reserved region,
+ * free only memory that is not part of crashkernel region.
+ */
+ if (initrd_start < crashk_end && initrd_end > crashk_start) {
+ /*
+ * Initialize initrd memory region since the kexec boot does
+ * not do.
+ */
+ memset((void *)initrd_start, 0, initrd_end - initrd_start);
+ if (initrd_start < crashk_start)
+ free_initrd_mem(initrd_start, crashk_start);
+ if (initrd_end > crashk_end)
+ free_initrd_mem(crashk_end, initrd_end);
+ } else
+#endif
+ free_initrd_mem(initrd_start, initrd_end);
+
initrd_start = 0;
initrd_end = 0;
}
*/
child_reaper = current;
- /* Sets up cpus_possible() */
smp_prepare_cpus(max_cpus);
do_pre_smp_initcalls();
goto out;
}
- ret = netlink_attachskb(sock, nc, 0, MAX_SCHEDULE_TIMEOUT);
+ ret = netlink_attachskb(sock, nc, 0,
+ MAX_SCHEDULE_TIMEOUT, NULL);
if (ret == 1)
goto retry;
if (ret) {
* could possibly have landed at. Also cast things to loff_t to
* prevent overflows and make comparisions vs. equal-width types.
*/
+ size = PAGE_ALIGN(size);
while (vma && (loff_t)(vma->vm_end - addr) <= size) {
next = vma->vm_next;
* We don't need to task_lock() this reference to tsk->cpuset,
* because tsk is already marked PF_EXITING, so attach_task() won't
* mess with it, or task is a failed fork, never visible to attach_task.
+ *
+ * Hack:
+ *
+ * Set the exiting tasks cpuset to the root cpuset (top_cpuset).
+ *
+ * Don't leave a task unable to allocate memory, as that is an
+ * accident waiting to happen should someone add a callout in
+ * do_exit() after the cpuset_exit() call that might allocate.
+ * If a task tries to allocate memory with an invalid cpuset,
+ * it will oops in cpuset_update_task_memory_state().
+ *
+ * We call cpuset_exit() while the task is still competent to
+ * handle notify_on_release(), then leave the task attached to
+ * the root cpuset (top_cpuset) for the remainder of its exit.
+ *
+ * To do this properly, we would increment the reference count on
+ * top_cpuset, and near the very end of the kernel/exit.c do_exit()
+ * code we would add a second cpuset function call, to drop that
+ * reference. This would just create an unnecessary hot spot on
+ * the top_cpuset reference count, to no avail.
+ *
+ * Normally, holding a reference to a cpuset without bumping its
+ * count is unsafe. The cpuset could go away, or someone could
+ * attach us to a different cpuset, decrementing the count on
+ * the first cpuset that we never incremented. But in this case,
+ * top_cpuset isn't going away, and either task has PF_EXITING set,
+ * which wards off any attach_task() attempts, or task is a failed
+ * fork, never visible to attach_task.
+ *
+ * Another way to do this would be to set the cpuset pointer
+ * to NULL here, and check in cpuset_update_task_memory_state()
+ * for a NULL pointer. This hack avoids that NULL check, for no
+ * cost (other than this way too long comment ;).
**/
void cpuset_exit(struct task_struct *tsk)
struct cpuset *cs;
cs = tsk->cpuset;
- tsk->cpuset = NULL;
+ tsk->cpuset = &top_cpuset; /* Hack - see comment above */
if (notify_on_release(cs)) {
char *pathbuf = NULL;
p->real_parent = current;
p->parent = p->real_parent;
+ spin_lock(¤t->sighand->siglock);
if (clone_flags & CLONE_THREAD) {
- spin_lock(¤t->sighand->siglock);
/*
* Important: if an exit-all has been started then
* do not create this new thread - the whole thread
*/
p->it_prof_expires = jiffies_to_cputime(1);
}
-
- spin_unlock(¤t->sighand->siglock);
}
/*
if (unlikely(p->ptrace & PT_PTRACED))
__ptrace_link(p, current->parent);
- attach_pid(p, PIDTYPE_PID, p->pid);
- attach_pid(p, PIDTYPE_TGID, p->tgid);
if (thread_group_leader(p)) {
p->signal->tty = current->signal->tty;
p->signal->pgrp = process_group(current);
if (p->pid)
__get_cpu_var(process_counts)++;
}
+ attach_pid(p, PIDTYPE_TGID, p->tgid);
+ attach_pid(p, PIDTYPE_PID, p->pid);
nr_threads++;
total_forks++;
+ spin_unlock(¤t->sighand->siglock);
write_unlock_irq(&tasklist_lock);
proc_fork_connector(p);
return p;
/* Switch the timer base, if necessary: */
new_base = switch_hrtimer_base(timer, base);
- if (mode == HRTIMER_REL)
+ if (mode == HRTIMER_REL) {
tim = ktime_add(tim, new_base->get_time());
+ /*
+ * CONFIG_TIME_LOW_RES is a temporary way for architectures
+ * to signal that they simply return xtime in
+ * do_gettimeoffset(). In this case we want to round up by
+ * resolution when starting a relative timer, to avoid short
+ * timeouts. This will go away with the GTOD framework.
+ */
+#ifdef CONFIG_TIME_LOW_RES
+ tim = ktime_add(tim, base->resolution);
+#endif
+ }
timer->expires = tim;
enqueue_hrtimer(timer, new_base);
#endif
local_irq_enable();
for (i = 0;;) {
+ touch_softlockup_watchdog();
i += panic_blink(i);
mdelay(1);
i++;
* corrected eventually when the cases giving rise to this
* are better understood.
*/
- if (PageReserved(page)) {
- printk("highmem reserved page?!\n");
+ if (PageReserved(page))
continue;
- }
BUG_ON(PageNosave(page));
if (PageNosaveFree(page))
continue;
*/
void __ptrace_unlink(task_t *child)
{
- if (!child->ptrace)
- BUG();
+ BUG_ON(!child->ptrace);
+
child->ptrace = 0;
if (!list_empty(&child->ptrace_list)) {
list_del_init(&child->ptrace_list);
return retval;
}
+void __ptrace_detach(struct task_struct *child, unsigned int data)
+{
+ child->exit_code = data;
+ /* .. re-parent .. */
+ __ptrace_unlink(child);
+ /* .. and wake it up. */
+ if (child->exit_state != EXIT_ZOMBIE)
+ wake_up_process(child);
+}
+
int ptrace_detach(struct task_struct *child, unsigned int data)
{
if (!valid_signal(data))
- return -EIO;
+ return -EIO;
/* Architecture-specific hardware disable .. */
ptrace_disable(child);
- /* .. re-parent .. */
- child->exit_code = data;
-
write_lock_irq(&tasklist_lock);
- __ptrace_unlink(child);
- /* .. and wake it up. */
- if (child->exit_state != EXIT_ZOMBIE)
- wake_up_process(child);
+ if (child->ptrace)
+ __ptrace_detach(child, data);
write_unlock_irq(&tasklist_lock);
return 0;
if (write) {
copy_to_user_page(vma, page, addr,
maddr + offset, buf, bytes);
- if (!PageCompound(page))
- set_page_dirty_lock(page);
+ set_page_dirty_lock(page);
} else {
copy_from_user_page(vma, page, addr,
buf, maddr + offset, bytes);
*/
unsigned long nr_running;
#ifdef CONFIG_SMP
- unsigned long prio_bias;
unsigned long cpu_load[3];
#endif
unsigned long long nr_switches;
return prio;
}
-#ifdef CONFIG_SMP
-static inline void inc_prio_bias(runqueue_t *rq, int prio)
-{
- rq->prio_bias += MAX_PRIO - prio;
-}
-
-static inline void dec_prio_bias(runqueue_t *rq, int prio)
-{
- rq->prio_bias -= MAX_PRIO - prio;
-}
-
-static inline void inc_nr_running(task_t *p, runqueue_t *rq)
-{
- rq->nr_running++;
- if (rt_task(p)) {
- if (p != rq->migration_thread)
- /*
- * The migration thread does the actual balancing. Do
- * not bias by its priority as the ultra high priority
- * will skew balancing adversely.
- */
- inc_prio_bias(rq, p->prio);
- } else
- inc_prio_bias(rq, p->static_prio);
-}
-
-static inline void dec_nr_running(task_t *p, runqueue_t *rq)
-{
- rq->nr_running--;
- if (rt_task(p)) {
- if (p != rq->migration_thread)
- dec_prio_bias(rq, p->prio);
- } else
- dec_prio_bias(rq, p->static_prio);
-}
-#else
-static inline void inc_prio_bias(runqueue_t *rq, int prio)
-{
-}
-
-static inline void dec_prio_bias(runqueue_t *rq, int prio)
-{
-}
-
-static inline void inc_nr_running(task_t *p, runqueue_t *rq)
-{
- rq->nr_running++;
-}
-
-static inline void dec_nr_running(task_t *p, runqueue_t *rq)
-{
- rq->nr_running--;
-}
-#endif
-
/*
* __activate_task - move a task to the runqueue.
*/
static inline void __activate_task(task_t *p, runqueue_t *rq)
{
enqueue_task(p, rq->active);
- inc_nr_running(p, rq);
+ rq->nr_running++;
}
/*
static inline void __activate_idle_task(task_t *p, runqueue_t *rq)
{
enqueue_task_head(p, rq->active);
- inc_nr_running(p, rq);
+ rq->nr_running++;
}
static int recalc_task_prio(task_t *p, unsigned long long now)
*/
static void deactivate_task(struct task_struct *p, runqueue_t *rq)
{
- dec_nr_running(p, rq);
+ rq->nr_running--;
dequeue_task(p, p->array);
p->array = NULL;
}
* We want to under-estimate the load of migration sources, to
* balance conservatively.
*/
-static unsigned long __source_load(int cpu, int type, enum idle_type idle)
+static inline unsigned long source_load(int cpu, int type)
{
runqueue_t *rq = cpu_rq(cpu);
- unsigned long running = rq->nr_running;
- unsigned long source_load, cpu_load = rq->cpu_load[type-1],
- load_now = running * SCHED_LOAD_SCALE;
-
+ unsigned long load_now = rq->nr_running * SCHED_LOAD_SCALE;
if (type == 0)
- source_load = load_now;
- else
- source_load = min(cpu_load, load_now);
+ return load_now;
- if (running > 1 || (idle == NOT_IDLE && running))
- /*
- * If we are busy rebalancing the load is biased by
- * priority to create 'nice' support across cpus. When
- * idle rebalancing we should only bias the source_load if
- * there is more than one task running on that queue to
- * prevent idle rebalance from trying to pull tasks from a
- * queue with only one running task.
- */
- source_load = source_load * rq->prio_bias / running;
-
- return source_load;
-}
-
-static inline unsigned long source_load(int cpu, int type)
-{
- return __source_load(cpu, type, NOT_IDLE);
+ return min(rq->cpu_load[type-1], load_now);
}
/*
* Return a high guess at the load of a migration-target cpu
*/
-static inline unsigned long __target_load(int cpu, int type, enum idle_type idle)
+static inline unsigned long target_load(int cpu, int type)
{
runqueue_t *rq = cpu_rq(cpu);
- unsigned long running = rq->nr_running;
- unsigned long target_load, cpu_load = rq->cpu_load[type-1],
- load_now = running * SCHED_LOAD_SCALE;
-
+ unsigned long load_now = rq->nr_running * SCHED_LOAD_SCALE;
if (type == 0)
- target_load = load_now;
- else
- target_load = max(cpu_load, load_now);
-
- if (running > 1 || (idle == NOT_IDLE && running))
- target_load = target_load * rq->prio_bias / running;
+ return load_now;
- return target_load;
-}
-
-static inline unsigned long target_load(int cpu, int type)
-{
- return __target_load(cpu, type, NOT_IDLE);
+ return max(rq->cpu_load[type-1], load_now);
}
/*
}
}
- if (p->last_waker_cpu != this_cpu)
- goto out_set_cpu;
-
if (unlikely(!cpu_isset(this_cpu, p->cpus_allowed)))
goto out_set_cpu;
cpu = task_cpu(p);
}
- p->last_waker_cpu = this_cpu;
-
out_activate:
#endif /* CONFIG_SMP */
if (old_state == TASK_UNINTERRUPTIBLE) {
#ifdef CONFIG_SCHEDSTATS
memset(&p->sched_info, 0, sizeof(p->sched_info));
#endif
-#if defined(CONFIG_SMP)
- p->last_waker_cpu = cpu;
-#if defined(__ARCH_WANT_UNLOCKED_CTXSW)
+#if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW)
p->oncpu = 0;
#endif
-#endif
#ifdef CONFIG_PREEMPT
/* Want to start with kernel preemption disabled. */
task_thread_info(p)->preempt_count = 1;
list_add_tail(&p->run_list, ¤t->run_list);
p->array = current->array;
p->array->nr_active++;
- inc_nr_running(p, rq);
+ rq->nr_running++;
}
set_need_resched();
} else
runqueue_t *this_rq, prio_array_t *this_array, int this_cpu)
{
dequeue_task(p, src_array);
- dec_nr_running(p, src_rq);
+ src_rq->nr_running--;
set_task_cpu(p, this_cpu);
- inc_nr_running(p, this_rq);
+ this_rq->nr_running++;
enqueue_task(p, this_array);
p->timestamp = (p->timestamp - src_rq->timestamp_last_tick)
+ this_rq->timestamp_last_tick;
/* Bias balancing toward cpus of our domain */
if (local_group)
- load = __target_load(i, load_idx, idle);
+ load = target_load(i, load_idx);
else
- load = __source_load(i, load_idx, idle);
+ load = source_load(i, load_idx);
avg_load += load;
}
int i;
for_each_cpu_mask(i, group->cpumask) {
- load = __source_load(i, 0, idle);
+ load = source_load(i, 0);
if (load > max_load) {
max_load = load;
goto out_unlock;
}
array = p->array;
- if (array) {
+ if (array)
dequeue_task(p, array);
- dec_prio_bias(rq, p->static_prio);
- }
old_prio = p->prio;
new_prio = NICE_TO_PRIO(nice);
if (array) {
enqueue_task(p, array);
- inc_prio_bias(rq, p->static_prio);
/*
* If the task increased its priority or is running and
* lowered its priority, then reschedule its CPU:
}
int
-do_sigaction(int sig, const struct k_sigaction *act, struct k_sigaction *oact)
+do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact)
{
struct k_sigaction *k;
sigset_t mask;
*oact = *k;
if (act) {
+ sigdelsetmask(&act->sa.sa_mask,
+ sigmask(SIGKILL) | sigmask(SIGSTOP));
/*
* POSIX 3.3.1.3:
* "Setting a signal action to SIG_IGN for a signal that is
read_lock(&tasklist_lock);
spin_lock_irq(&t->sighand->siglock);
*k = *act;
- sigdelsetmask(&k->sa.sa_mask,
- sigmask(SIGKILL) | sigmask(SIGSTOP));
sigemptyset(&mask);
sigaddset(&mask, sig);
rm_from_queue_full(&mask, &t->signal->shared_pending);
}
*k = *act;
- sigdelsetmask(&k->sa.sa_mask,
- sigmask(SIGKILL) | sigmask(SIGSTOP));
}
spin_unlock_irq(¤t->sighand->siglock);
new_sa.sa.sa_handler = handler;
new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK;
+ sigemptyset(&new_sa.sa.sa_mask);
ret = do_sigaction(sig, &new_sa, &old_sa);
*/
nr_cleared_tags = 0;
for (tag = 0; tag < RADIX_TREE_TAGS; tag++) {
+ tags[tag] = 1;
if (tag_get(pathp->node, tag, pathp->offset)) {
tag_clear(pathp->node, tag, pathp->offset);
- tags[tag] = 0;
- nr_cleared_tags++;
- } else
- tags[tag] = 1;
+ if (!any_tag_set(pathp->node, tag)) {
+ tags[tag] = 0;
+ nr_cleared_tags++;
+ }
+ }
}
for (pathp--; nr_cleared_tags && pathp->node; pathp--) {
BUG_ON(page_count(page));
INIT_LIST_HEAD(&page->lru);
- page[1].mapping = NULL;
+ page[1].lru.next = NULL; /* reset dtor */
spin_lock(&hugetlb_lock);
enqueue_huge_page(page);
}
spin_unlock(&hugetlb_lock);
set_page_count(page, 1);
- page[1].mapping = (void *)free_huge_page;
+ page[1].lru.next = (void *)free_huge_page; /* set dtor */
for (i = 0; i < (HPAGE_SIZE/PAGE_SIZE); ++i)
clear_user_highpage(&page[i], addr);
return page;
struct mm_struct * mm = vma->vm_mm;
int error = 0;
pgoff_t pgoff;
- int new_flags = vma->vm_flags & ~VM_READHINTMASK;
+ int new_flags = vma->vm_flags;
switch (behavior) {
+ case MADV_NORMAL:
+ new_flags = new_flags & ~VM_RAND_READ & ~VM_SEQ_READ;
+ break;
case MADV_SEQUENTIAL:
- new_flags |= VM_SEQ_READ;
+ new_flags = (new_flags & ~VM_RAND_READ) | VM_SEQ_READ;
break;
case MADV_RANDOM:
- new_flags |= VM_RAND_READ;
+ new_flags = (new_flags & ~VM_SEQ_READ) | VM_RAND_READ;
break;
- default:
+ case MADV_DONTFORK:
+ new_flags |= VM_DONTCOPY;
+ break;
+ case MADV_DOFORK:
+ new_flags &= ~VM_DONTCOPY;
break;
}
long error;
switch (behavior) {
+ case MADV_DOFORK:
+ if (vma->vm_flags & VM_IO) {
+ error = -EINVAL;
+ break;
+ }
+ case MADV_DONTFORK:
case MADV_NORMAL:
case MADV_SEQUENTIAL:
case MADV_RANDOM:
int percpu_pagelist_fraction;
static void fastcall free_hot_cold_page(struct page *page, int cold);
+static void __free_pages_ok(struct page *page, unsigned int order);
/*
* results with 256, 32 in the lowmem_reserve sysctl:
* All pages have PG_compound set. All pages have their ->private pointing at
* the head page (even the head page has this).
*
- * The first tail page's ->mapping, if non-zero, holds the address of the
- * compound page's put_page() function.
- *
- * The order of the allocation is stored in the first tail page's ->index
- * This is only for debug at present. This usage means that zero-order pages
- * may not be compound.
+ * The first tail page's ->lru.next holds the address of the compound page's
+ * put_page() function. Its ->lru.prev holds the order of allocation.
+ * This usage means that zero-order pages may not be compound.
*/
+
+static void free_compound_page(struct page *page)
+{
+ __free_pages_ok(page, (unsigned long)page[1].lru.prev);
+}
+
static void prep_compound_page(struct page *page, unsigned long order)
{
int i;
int nr_pages = 1 << order;
- page[1].mapping = NULL;
- page[1].index = order;
+ page[1].lru.next = (void *)free_compound_page; /* set dtor */
+ page[1].lru.prev = (void *)order;
for (i = 0; i < nr_pages; i++) {
struct page *p = page + i;
int i;
int nr_pages = 1 << order;
- if (unlikely(page[1].index != order))
+ if (unlikely((unsigned long)page[1].lru.prev != order))
bad_page(page);
for (i = 0; i < nr_pages; i++) {
BUG();
}
+ /*
+ * Prevent CPUs from coming and going.
+ * lock_cpu_hotplug() nests outside cache_chain_mutex
+ */
+ lock_cpu_hotplug();
+
mutex_lock(&cache_chain_mutex);
list_for_each(p, &cache_chain) {
cachep->dtor = dtor;
cachep->name = name;
- /* Don't let CPUs to come and go */
- lock_cpu_hotplug();
if (g_cpucache_up == FULL) {
enable_cpucache(cachep);
/* cache setup completed, link it into the list */
list_add(&cachep->next, &cache_chain);
- unlock_cpu_hotplug();
oops:
if (!cachep && (flags & SLAB_PANIC))
panic("kmem_cache_create(): failed to create slab `%s'\n",
name);
mutex_unlock(&cache_chain_mutex);
+ unlock_cpu_hotplug();
return cachep;
}
EXPORT_SYMBOL(kmem_cache_create);
if (put_page_testzero(page)) {
void (*dtor)(struct page *page);
- dtor = (void (*)(struct page *))page[1].mapping;
+ dtor = (void (*)(struct page *))page[1].lru.next;
(*dtor)(page);
}
}
BUG_ON(PageActive(page));
sc->nr_scanned++;
+
+ if (!sc->may_swap && page_mapped(page))
+ goto keep_locked;
+
/* Double the slab pressure for mapped and swapcache pages */
if (page_mapped(page) || PageSwapCache(page))
sc->nr_scanned++;
struct address_space *mapping = page_mapping(page);
if (page_mapped(page) && mapping)
- if (try_to_unmap(page, 0) != SWAP_SUCCESS)
+ if (try_to_unmap(page, 1) != SWAP_SUCCESS)
goto unlock_retry;
if (PageDirty(page)) {
* pages are swapped out.
*
* The function returns after 10 attempts or if no pages
- * are movable anymore because t has become empty
+ * are movable anymore because to has become empty
* or no retryable pages exist anymore.
*
* Return: Number of pages not migrated when "to" ran empty.
goto unlock_both;
if (mapping->a_ops->migratepage) {
+ /*
+ * Most pages have a mapping and most filesystems
+ * should provide a migration function. Anonymous
+ * pages are part of swap space which also has its
+ * own migration function. This is the most common
+ * path for page migration.
+ */
rc = mapping->a_ops->migratepage(newpage, page);
goto unlock_both;
}
/*
- * Trigger writeout if page is dirty
+ * Default handling if a filesystem does not provide
+ * a migration function. We can only migrate clean
+ * pages so try to write out any dirty pages first.
*/
if (PageDirty(page)) {
switch (pageout(page, mapping)) {
; /* try to migrate the page below */
}
}
+
/*
- * If we have no buffer or can release the buffer
- * then do a simple migration.
+ * Buffers are managed in a filesystem specific way.
+ * We must have no buffers or drop them.
*/
if (!page_has_buffers(page) ||
try_to_release_page(page, GFP_KERNEL)) {
* swap them out.
*/
if (pass > 4) {
+ /*
+ * Persistently unable to drop buffers..... As a
+ * measure of last resort we fall back to
+ * swap_page().
+ */
unlock_page(newpage);
newpage = NULL;
rc = swap_page(page);
struct page *page;
struct pagevec pvec;
int reclaim_mapped = 0;
- long mapped_ratio;
- long distress;
- long swap_tendency;
+
+ if (unlikely(sc->may_swap)) {
+ long mapped_ratio;
+ long distress;
+ long swap_tendency;
+
+ /*
+ * `distress' is a measure of how much trouble we're having
+ * reclaiming pages. 0 -> no problems. 100 -> great trouble.
+ */
+ distress = 100 >> zone->prev_priority;
+
+ /*
+ * The point of this algorithm is to decide when to start
+ * reclaiming mapped memory instead of just pagecache. Work out
+ * how much memory
+ * is mapped.
+ */
+ mapped_ratio = (sc->nr_mapped * 100) / total_memory;
+
+ /*
+ * Now decide how much we really want to unmap some pages. The
+ * mapped ratio is downgraded - just because there's a lot of
+ * mapped memory doesn't necessarily mean that page reclaim
+ * isn't succeeding.
+ *
+ * The distress ratio is important - we don't want to start
+ * going oom.
+ *
+ * A 100% value of vm_swappiness overrides this algorithm
+ * altogether.
+ */
+ swap_tendency = mapped_ratio / 2 + distress + vm_swappiness;
+
+ /*
+ * Now use this metric to decide whether to start moving mapped
+ * memory onto the inactive list.
+ */
+ if (swap_tendency >= 100)
+ reclaim_mapped = 1;
+ }
lru_add_drain();
spin_lock_irq(&zone->lru_lock);
zone->nr_active -= pgmoved;
spin_unlock_irq(&zone->lru_lock);
- /*
- * `distress' is a measure of how much trouble we're having reclaiming
- * pages. 0 -> no problems. 100 -> great trouble.
- */
- distress = 100 >> zone->prev_priority;
-
- /*
- * The point of this algorithm is to decide when to start reclaiming
- * mapped memory instead of just pagecache. Work out how much memory
- * is mapped.
- */
- mapped_ratio = (sc->nr_mapped * 100) / total_memory;
-
- /*
- * Now decide how much we really want to unmap some pages. The mapped
- * ratio is downgraded - just because there's a lot of mapped memory
- * doesn't necessarily mean that page reclaim isn't succeeding.
- *
- * The distress ratio is important - we don't want to start going oom.
- *
- * A 100% value of vm_swappiness overrides this algorithm altogether.
- */
- swap_tendency = mapped_ratio / 2 + distress + vm_swappiness;
-
- /*
- * Now use this metric to decide whether to start moving mapped memory
- * onto the inactive list.
- */
- if (swap_tendency >= 100)
- reclaim_mapped = 1;
-
while (!list_empty(&l_hold)) {
cond_resched();
page = lru_to_page(&l_hold);
sc.nr_reclaimed = 0;
sc.priority = priority;
sc.swap_cluster_max = nr_pages? nr_pages : SWAP_CLUSTER_MAX;
- atomic_inc(&zone->reclaim_in_progress);
shrink_zone(zone, &sc);
- atomic_dec(&zone->reclaim_in_progress);
reclaim_state->reclaimed_slab = 0;
nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL,
lru_pages);
EXPORT_SYMBOL(destroy_8023_client);
EXPORT_SYMBOL(make_8023_client);
+
+MODULE_LICENSE("GPL");
remove_wait_queue(&sigd_sleep,&wait);
#else
if (!sigd) {
- printk(KERN_WARNING "atmsvc: no signaling demon\n");
+ if (net_ratelimit())
+ printk(KERN_WARNING "atmsvc: no signaling demon\n");
kfree_skb(skb);
return;
}
static int hci_sock_release(struct socket *sock)
{
struct sock *sk = sock->sk;
- struct hci_dev *hdev = hci_pi(sk)->hdev;
+ struct hci_dev *hdev;
BT_DBG("sock %p sk %p", sock, sk);
if (!sk)
return 0;
+ hdev = hci_pi(sk)->hdev;
+
bt_sock_unlink(&hci_sk_list, sk);
if (hdev) {
{
struct sockaddr_hci *haddr = (struct sockaddr_hci *) addr;
struct sock *sk = sock->sk;
+ struct hci_dev *hdev = hci_pi(sk)->hdev;
BT_DBG("sock %p sk %p", sock, sk);
+ if (!hdev)
+ return -EBADFD;
+
lock_sock(sk);
*addr_len = sizeof(*haddr);
haddr->hci_family = AF_BLUETOOTH;
- haddr->hci_dev = hci_pi(sk)->hdev->id;
+ haddr->hci_dev = hdev->id;
release_sock(sk);
return 0;
#include <net/bluetooth/l2cap.h>
#include <net/bluetooth/rfcomm.h>
-#define VERSION "1.6"
-
#ifndef CONFIG_BT_RFCOMM_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
+#define VERSION "1.7"
+
+static unsigned int l2cap_mtu = RFCOMM_MAX_L2CAP_MTU;
+
static struct task_struct *rfcomm_thread;
static DECLARE_MUTEX(rfcomm_sem);
/* Set L2CAP options */
sk = sock->sk;
lock_sock(sk);
- l2cap_pi(sk)->imtu = RFCOMM_MAX_L2CAP_MTU;
+ l2cap_pi(sk)->imtu = l2cap_mtu;
release_sock(sk);
s = rfcomm_session_add(sock, BT_BOUND);
/* Set L2CAP options */
sk = sock->sk;
lock_sock(sk);
- l2cap_pi(sk)->imtu = RFCOMM_MAX_L2CAP_MTU;
+ l2cap_pi(sk)->imtu = l2cap_mtu;
release_sock(sk);
/* Start listening on the socket */
module_init(rfcomm_init);
module_exit(rfcomm_exit);
+module_param(l2cap_mtu, uint, 0644);
+MODULE_PARM_DESC(l2cap_mtu, "Default MTU for the L2CAP connection");
+
MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth RFCOMM ver " VERSION);
MODULE_VERSION(VERSION);
*/
static void port_carrier_check(void *arg)
{
- struct net_bridge_port *p = arg;
+ struct net_device *dev = arg;
+ struct net_bridge_port *p;
rtnl_lock();
+ p = dev->br_port;
+ if (!p)
+ goto done;
+
if (netif_carrier_ok(p->dev)) {
u32 cost = port_cost(p->dev);
br_stp_disable_port(p);
spin_unlock_bh(&p->br->lock);
}
+done:
rtnl_unlock();
}
+static void release_nbp(struct kobject *kobj)
+{
+ struct net_bridge_port *p
+ = container_of(kobj, struct net_bridge_port, kobj);
+ kfree(p);
+}
+
+static struct kobj_type brport_ktype = {
+#ifdef CONFIG_SYSFS
+ .sysfs_ops = &brport_sysfs_ops,
+#endif
+ .release = release_nbp,
+};
+
static void destroy_nbp(struct net_bridge_port *p)
{
struct net_device *dev = p->dev;
- dev->br_port = NULL;
p->br = NULL;
p->dev = NULL;
dev_put(dev);
- br_sysfs_freeif(p);
+ kobject_put(&p->kobj);
}
static void destroy_nbp_rcu(struct rcu_head *head)
struct net_bridge *br = p->br;
struct net_device *dev = p->dev;
- /* Race between RTNL notify and RCU callback */
- if (p->deleted)
- return;
+ sysfs_remove_link(&br->ifobj, dev->name);
dev_set_promiscuity(dev, -1);
cancel_delayed_work(&p->carrier_check);
- flush_scheduled_work();
spin_lock_bh(&br->lock);
br_stp_disable_port(p);
- p->deleted = 1;
spin_unlock_bh(&br->lock);
br_fdb_delete_by_port(br, p);
list_del_rcu(&p->list);
+ rcu_assign_pointer(dev->br_port, NULL);
+
+ kobject_del(&p->kobj);
+
call_rcu(&p->rcu, destroy_nbp_rcu);
}
struct net_bridge_port *p, *n;
list_for_each_entry_safe(p, n, &br->port_list, list) {
- br_sysfs_removeif(p);
del_nbp(p);
}
p->dev = dev;
p->path_cost = port_cost(dev);
p->priority = 0x8000 >> BR_PORT_BITS;
- dev->br_port = p;
p->port_no = index;
br_init_port(p);
p->state = BR_STATE_DISABLED;
- INIT_WORK(&p->carrier_check, port_carrier_check, p);
+ INIT_WORK(&p->carrier_check, port_carrier_check, dev);
kobject_init(&p->kobj);
+ kobject_set_name(&p->kobj, SYSFS_BRIDGE_PORT_ATTR);
+ p->kobj.ktype = &brport_ktype;
+ p->kobj.parent = &(dev->class_dev.kobj);
+ p->kobj.kset = NULL;
+
return p;
}
if (dev->br_port != NULL)
return -EBUSY;
- if (IS_ERR(p = new_nbp(br, dev)))
+ p = new_nbp(br, dev);
+ if (IS_ERR(p))
return PTR_ERR(p);
- if ((err = br_fdb_insert(br, p, dev->dev_addr)))
- destroy_nbp(p);
-
- else if ((err = br_sysfs_addif(p)))
- del_nbp(p);
- else {
- dev_set_promiscuity(dev, 1);
+ err = kobject_add(&p->kobj);
+ if (err)
+ goto err0;
- list_add_rcu(&p->list, &br->port_list);
+ err = br_fdb_insert(br, p, dev->dev_addr);
+ if (err)
+ goto err1;
- spin_lock_bh(&br->lock);
- br_stp_recalculate_bridge_id(br);
- br_features_recompute(br);
- if ((br->dev->flags & IFF_UP)
- && (dev->flags & IFF_UP) && netif_carrier_ok(dev))
- br_stp_enable_port(p);
- spin_unlock_bh(&br->lock);
+ err = br_sysfs_addif(p);
+ if (err)
+ goto err2;
- dev_set_mtu(br->dev, br_min_mtu(br));
- }
+ rcu_assign_pointer(dev->br_port, p);
+ dev_set_promiscuity(dev, 1);
+
+ list_add_rcu(&p->list, &br->port_list);
+ spin_lock_bh(&br->lock);
+ br_stp_recalculate_bridge_id(br);
+ br_features_recompute(br);
+ schedule_delayed_work(&p->carrier_check, BR_PORT_DEBOUNCE);
+ spin_unlock_bh(&br->lock);
+
+ dev_set_mtu(br->dev, br_min_mtu(br));
+ kobject_uevent(&p->kobj, KOBJ_ADD);
+
+ return 0;
+err2:
+ br_fdb_delete_by_port(br, p);
+err1:
+ kobject_del(&p->kobj);
+err0:
+ kobject_put(&p->kobj);
return err;
}
if (!p || p->br != br)
return -EINVAL;
- br_sysfs_removeif(p);
del_nbp(p);
spin_lock_bh(&br->lock);
int br_handle_frame_finish(struct sk_buff *skb)
{
const unsigned char *dest = eth_hdr(skb)->h_dest;
- struct net_bridge_port *p = skb->dev->br_port;
- struct net_bridge *br = p->br;
+ struct net_bridge_port *p = rcu_dereference(skb->dev->br_port);
+ struct net_bridge *br;
struct net_bridge_fdb_entry *dst;
int passedup = 0;
+ if (!p || p->state == BR_STATE_DISABLED)
+ goto drop;
+
/* insert into forwarding database after filtering to avoid spoofing */
- br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
+ br = p->br;
+ br_fdb_update(br, p, eth_hdr(skb)->h_source);
- if (p->state == BR_STATE_LEARNING) {
- kfree_skb(skb);
- goto out;
- }
+ if (p->state == BR_STATE_LEARNING)
+ goto drop;
if (br->dev->flags & IFF_PROMISC) {
struct sk_buff *skb2;
out:
return 0;
+drop:
+ kfree_skb(skb);
+ goto out;
}
/*
#define store_orig_dstaddr(skb) (skb_origaddr(skb) = (skb)->nh.iph->daddr)
#define dnat_took_place(skb) (skb_origaddr(skb) != (skb)->nh.iph->daddr)
-#define has_bridge_parent(device) ((device)->br_port != NULL)
-#define bridge_parent(device) ((device)->br_port->br->dev)
-
#ifdef CONFIG_SYSCTL
static struct ctl_table_header *brnf_sysctl_header;
static int brnf_call_iptables = 1;
.rt_flags = 0,
};
+static inline struct net_device *bridge_parent(const struct net_device *dev)
+{
+ struct net_bridge_port *port = rcu_dereference(dev->br_port);
+
+ return port ? port->br->dev : NULL;
+}
/* PF_BRIDGE/PRE_ROUTING *********************************************/
/* Undo the changes made for ip6tables PREROUTING and continue the
skb->nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING;
skb->dev = bridge_parent(skb->dev);
- if (skb->protocol == __constant_htons(ETH_P_8021Q)) {
- skb_pull(skb, VLAN_HLEN);
- skb->nh.raw += VLAN_HLEN;
+ if (!skb->dev)
+ kfree_skb(skb);
+ else {
+ if (skb->protocol == __constant_htons(ETH_P_8021Q)) {
+ skb_pull(skb, VLAN_HLEN);
+ skb->nh.raw += VLAN_HLEN;
+ }
+ skb->dst->output(skb);
}
- skb->dst->output(skb);
return 0;
}
}
/* Some common code for IPv4/IPv6 */
-static void setup_pre_routing(struct sk_buff *skb)
+static struct net_device *setup_pre_routing(struct sk_buff *skb)
{
struct nf_bridge_info *nf_bridge = skb->nf_bridge;
nf_bridge->mask |= BRNF_NF_BRIDGE_PREROUTING;
nf_bridge->physindev = skb->dev;
skb->dev = bridge_parent(skb->dev);
+
+ return skb->dev;
}
/* We only check the length. A bridge shouldn't do any hop-by-hop stuff anyway */
nf_bridge_put(skb->nf_bridge);
if ((nf_bridge = nf_bridge_alloc(skb)) == NULL)
return NF_DROP;
- setup_pre_routing(skb);
+ if (!setup_pre_routing(skb))
+ return NF_DROP;
NF_HOOK(PF_INET6, NF_IP6_PRE_ROUTING, skb, skb->dev, NULL,
br_nf_pre_routing_finish_ipv6);
nf_bridge_put(skb->nf_bridge);
if ((nf_bridge = nf_bridge_alloc(skb)) == NULL)
return NF_DROP;
- setup_pre_routing(skb);
+ if (!setup_pre_routing(skb))
+ return NF_DROP;
store_orig_dstaddr(skb);
NF_HOOK(PF_INET, NF_IP_PRE_ROUTING, skb, skb->dev, NULL,
struct sk_buff *skb = *pskb;
struct nf_bridge_info *nf_bridge;
struct vlan_ethhdr *hdr = vlan_eth_hdr(skb);
+ struct net_device *parent;
int pf;
if (!skb->nf_bridge)
return NF_ACCEPT;
+ parent = bridge_parent(out);
+ if (!parent)
+ return NF_DROP;
+
if (skb->protocol == __constant_htons(ETH_P_IP) || IS_VLAN_IP)
pf = PF_INET;
else
nf_bridge->mask |= BRNF_BRIDGED;
nf_bridge->physoutdev = skb->dev;
- NF_HOOK(pf, NF_IP_FORWARD, skb, bridge_parent(in),
- bridge_parent(out), br_nf_forward_finish);
+ NF_HOOK(pf, NF_IP_FORWARD, skb, bridge_parent(in), parent,
+ br_nf_forward_finish);
return NF_STOLEN;
}
goto out;
}
realoutdev = bridge_parent(skb->dev);
+ if (!realoutdev)
+ return NF_DROP;
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
/* iptables should match -o br0.x */
/* IP forwarded traffic has a physindev, locally
* generated traffic hasn't. */
if (realindev != NULL) {
- if (!(nf_bridge->mask & BRNF_DONT_TAKE_PARENT) &&
- has_bridge_parent(realindev))
- realindev = bridge_parent(realindev);
+ if (!(nf_bridge->mask & BRNF_DONT_TAKE_PARENT) ) {
+ struct net_device *parent = bridge_parent(realindev);
+ if (parent)
+ realindev = parent;
+ }
NF_HOOK_THRESH(pf, NF_IP_FORWARD, skb, realindev,
realoutdev, br_nf_local_out_finish,
if (!nf_bridge)
return NF_ACCEPT;
+ if (!realoutdev)
+ return NF_DROP;
+
if (skb->protocol == __constant_htons(ETH_P_IP) || IS_VLAN_IP)
pf = PF_INET;
else
print_error:
if (skb->dev != NULL) {
printk("[%s]", skb->dev->name);
- if (has_bridge_parent(skb->dev))
- printk("[%s]", bridge_parent(skb->dev)->name);
+ if (realoutdev)
+ printk("[%s]", realoutdev->name);
}
printk(" head:%p, raw:%p, data:%p\n", skb->head, skb->mac.raw,
skb->data);
/* STP */
u8 priority;
u8 state;
- u8 deleted;
u16 port_no;
unsigned char topology_change_ack;
unsigned char config_pending;
#ifdef CONFIG_SYSFS
/* br_sysfs_if.c */
+extern struct sysfs_ops brport_sysfs_ops;
extern int br_sysfs_addif(struct net_bridge_port *p);
-extern void br_sysfs_removeif(struct net_bridge_port *p);
-extern void br_sysfs_freeif(struct net_bridge_port *p);
/* br_sysfs_br.c */
extern int br_sysfs_addbr(struct net_device *dev);
#else
#define br_sysfs_addif(p) (0)
-#define br_sysfs_removeif(p) do { } while(0)
-#define br_sysfs_freeif(p) kfree(p)
#define br_sysfs_addbr(dev) (0)
#define br_sysfs_delbr(dev) do { } while(0)
#endif /* CONFIG_SYSFS */
static const unsigned char header[6] = {0x42, 0x42, 0x03, 0x00, 0x00, 0x00};
-/* NO locks */
+/* NO locks, but rcu_read_lock (preempt_disabled) */
int br_stp_handle_bpdu(struct sk_buff *skb)
{
- struct net_bridge_port *p = skb->dev->br_port;
- struct net_bridge *br = p->br;
+ struct net_bridge_port *p = rcu_dereference(skb->dev->br_port);
+ struct net_bridge *br;
unsigned char *buf;
+ if (!p)
+ goto err;
+
+ br = p->br;
+ spin_lock(&br->lock);
+
+ if (p->state == BR_STATE_DISABLED || !(br->dev->flags & IFF_UP))
+ goto out;
+
/* insert into forwarding database after filtering to avoid spoofing */
- br_fdb_update(p->br, p, eth_hdr(skb)->h_source);
+ br_fdb_update(br, p, eth_hdr(skb)->h_source);
+
+ if (!br->stp_enabled)
+ goto out;
/* need at least the 802 and STP headers */
if (!pskb_may_pull(skb, sizeof(header)+1) ||
memcmp(skb->data, header, sizeof(header)))
- goto err;
+ goto out;
buf = skb_pull(skb, sizeof(header));
- spin_lock_bh(&br->lock);
- if (p->state == BR_STATE_DISABLED
- || !(br->dev->flags & IFF_UP)
- || !br->stp_enabled)
- goto out;
-
if (buf[0] == BPDU_TYPE_CONFIG) {
struct br_config_bpdu bpdu;
br_received_tcn_bpdu(p);
}
out:
- spin_unlock_bh(&br->lock);
+ spin_unlock(&br->lock);
err:
kfree_skb(skb);
return 0;
{
struct net_bridge_port *p;
- spin_lock(&br->lock);
+ spin_lock_bh(&br->lock);
list_for_each_entry(p, &br->port_list, list) {
if (p->state != BR_STATE_DISABLED)
br_stp_disable_port(p);
br->topology_change = 0;
br->topology_change_detected = 0;
- spin_unlock(&br->lock);
+ spin_unlock_bh(&br->lock);
del_timer_sync(&br->hello_timer);
del_timer_sync(&br->topology_change_timer);
return ret;
}
-/* called from kobject_put when port ref count goes to zero. */
-static void brport_release(struct kobject *kobj)
-{
- kfree(container_of(kobj, struct net_bridge_port, kobj));
-}
-
-static struct sysfs_ops brport_sysfs_ops = {
+struct sysfs_ops brport_sysfs_ops = {
.show = brport_show,
.store = brport_store,
};
-static struct kobj_type brport_ktype = {
- .sysfs_ops = &brport_sysfs_ops,
- .release = brport_release,
-};
-
-
/*
* Add sysfs entries to ethernet device added to a bridge.
* Creates a brport subdirectory with bridge attributes.
struct brport_attribute **a;
int err;
- ASSERT_RTNL();
-
- kobject_set_name(&p->kobj, SYSFS_BRIDGE_PORT_ATTR);
- p->kobj.ktype = &brport_ktype;
- p->kobj.parent = &(p->dev->class_dev.kobj);
- p->kobj.kset = NULL;
-
- err = kobject_add(&p->kobj);
- if(err)
- goto out1;
-
err = sysfs_create_link(&p->kobj, &br->dev->class_dev.kobj,
SYSFS_BRIDGE_PORT_LINK);
if (err)
goto out2;
}
- err = sysfs_create_link(&br->ifobj, &p->kobj, p->dev->name);
- if (err)
- goto out2;
-
- kobject_uevent(&p->kobj, KOBJ_ADD);
- return 0;
- out2:
- kobject_del(&p->kobj);
- out1:
+ err= sysfs_create_link(&br->ifobj, &p->kobj, p->dev->name);
+out2:
return err;
}
-
-void br_sysfs_removeif(struct net_bridge_port *p)
-{
- pr_debug("br_sysfs_removeif\n");
- sysfs_remove_link(&p->br->ifobj, p->dev->name);
- kobject_uevent(&p->kobj, KOBJ_REMOVE);
- kobject_del(&p->kobj);
-}
-
-void br_sysfs_freeif(struct net_bridge_port *p)
-{
- pr_debug("br_sysfs_freeif\n");
- kobject_put(&p->kobj);
-}
int skb_copy_datagram_iovec(const struct sk_buff *skb, int offset,
struct iovec *to, int len)
{
- int i, err, fraglen, end = 0;
- struct sk_buff *next = skb_shinfo(skb)->frag_list;
+ int start = skb_headlen(skb);
+ int i, copy = start - offset;
- if (!len)
- return 0;
+ /* Copy header. */
+ if (copy > 0) {
+ if (copy > len)
+ copy = len;
+ if (memcpy_toiovec(to, skb->data + offset, copy))
+ goto fault;
+ if ((len -= copy) == 0)
+ return 0;
+ offset += copy;
+ }
-next_skb:
- fraglen = skb_headlen(skb);
- i = -1;
+ /* Copy paged appendix. Hmm... why does this look so complicated? */
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ int end;
- while (1) {
- int start = end;
+ BUG_TRAP(start <= offset + len);
- if ((end += fraglen) > offset) {
- int copy = end - offset, o = offset - start;
+ end = start + skb_shinfo(skb)->frags[i].size;
+ if ((copy = end - offset) > 0) {
+ int err;
+ u8 *vaddr;
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ struct page *page = frag->page;
if (copy > len)
copy = len;
- if (i == -1)
- err = memcpy_toiovec(to, skb->data + o, copy);
- else {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- struct page *page = frag->page;
- void *p = kmap(page) + frag->page_offset + o;
- err = memcpy_toiovec(to, p, copy);
- kunmap(page);
- }
+ vaddr = kmap(page);
+ err = memcpy_toiovec(to, vaddr + frag->page_offset +
+ offset - start, copy);
+ kunmap(page);
if (err)
goto fault;
if (!(len -= copy))
return 0;
offset += copy;
}
- if (++i >= skb_shinfo(skb)->nr_frags)
- break;
- fraglen = skb_shinfo(skb)->frags[i].size;
+ start = end;
}
- if (next) {
- skb = next;
- BUG_ON(skb_shinfo(skb)->frag_list);
- next = skb->next;
- goto next_skb;
+
+ if (skb_shinfo(skb)->frag_list) {
+ struct sk_buff *list = skb_shinfo(skb)->frag_list;
+
+ for (; list; list = list->next) {
+ int end;
+
+ BUG_TRAP(start <= offset + len);
+
+ end = start + list->len;
+ if ((copy = end - offset) > 0) {
+ if (copy > len)
+ copy = len;
+ if (skb_copy_datagram_iovec(list,
+ offset - start,
+ to, copy))
+ goto fault;
+ if ((len -= copy) == 0)
+ return 0;
+ offset += copy;
+ }
+ start = end;
+ }
}
+ if (!len)
+ return 0;
+
fault:
return -EFAULT;
}
if (!skb)
return;
- if (rtnetlink_fill_ifinfo(skb, dev, type, current->pid, 0, change, 0) < 0) {
+ if (rtnetlink_fill_ifinfo(skb, dev, type, 0, 0, change, 0) < 0) {
kfree_skb(skb);
return;
}
if (!skb)
netlink_set_err(rtnl, 0, RTNLGRP_IPV4_IFADDR, ENOBUFS);
- else if (inet_fill_ifaddr(skb, ifa, current->pid, 0, event, 0) < 0) {
+ else if (inet_fill_ifaddr(skb, ifa, 0, 0, event, 0) < 0) {
kfree_skb(skb);
netlink_set_err(rtnl, 0, RTNLGRP_IPV4_IFADDR, EINVAL);
} else {
}
nl->nlmsg_flags = NLM_F_REQUEST;
- nl->nlmsg_pid = current->pid;
+ nl->nlmsg_pid = 0;
nl->nlmsg_seq = 0;
nl->nlmsg_len = NLMSG_LENGTH(sizeof(*rtm));
if (cmd == SIOCDELRT) {
int sysctl_icmp_echo_ignore_broadcasts = 1;
/* Control parameter - ignore bogus broadcast responses? */
-int sysctl_icmp_ignore_bogus_error_responses;
+int sysctl_icmp_ignore_bogus_error_responses = 1;
/*
* Configurable global rate limit.
skb->h.raw = skb->nh.raw;
skb->nh.raw = skb_push(skb, gre_hlen);
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
- IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE|IPSKB_XFRM_TRANSFORMED);
+ IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
+ IPSKB_REROUTED);
dst_release(skb->dst);
skb->dst = &rt->u.dst;
{
#if defined(CONFIG_NETFILTER) && defined(CONFIG_XFRM)
/* Policy lookup after SNAT yielded a new policy */
- if (skb->dst->xfrm != NULL)
- return xfrm4_output_finish(skb);
+ if (skb->dst->xfrm != NULL) {
+ IPCB(skb)->flags |= IPSKB_REROUTED;
+ return dst_output(skb);
+ }
#endif
if (skb->len > dst_mtu(skb->dst) &&
!(skb_shinfo(skb)->ufo_size || skb_shinfo(skb)->tso_size))
newskb->dev, ip_dev_loopback_xmit);
}
- return NF_HOOK(PF_INET, NF_IP_POST_ROUTING, skb, NULL, skb->dev,
- ip_finish_output);
+ return NF_HOOK_COND(PF_INET, NF_IP_POST_ROUTING, skb, NULL, skb->dev,
+ ip_finish_output,
+ !(IPCB(skb)->flags & IPSKB_REROUTED));
}
int ip_output(struct sk_buff *skb)
skb->dev = dev;
skb->protocol = htons(ETH_P_IP);
- return NF_HOOK(PF_INET, NF_IP_POST_ROUTING, skb, NULL, dev,
- ip_finish_output);
+ return NF_HOOK_COND(PF_INET, NF_IP_POST_ROUTING, skb, NULL, dev,
+ ip_finish_output,
+ !(IPCB(skb)->flags & IPSKB_REROUTED));
}
int ip_queue_xmit(struct sk_buff *skb, int ipfragok)
skb->h.raw = skb->nh.raw;
skb->nh.raw = skb_push(skb, sizeof(struct iphdr));
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
- IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE|IPSKB_XFRM_TRANSFORMED);
+ IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED |
+ IPSKB_REROUTED);
dst_release(skb->dst);
skb->dst = &rt->u.dst;
}
EXPORT_SYMBOL(ip_route_me_harder);
+#ifdef CONFIG_XFRM
+int ip_xfrm_me_harder(struct sk_buff **pskb)
+{
+ struct flowi fl;
+ unsigned int hh_len;
+ struct dst_entry *dst;
+
+ if (IPCB(*pskb)->flags & IPSKB_XFRM_TRANSFORMED)
+ return 0;
+ if (xfrm_decode_session(*pskb, &fl, AF_INET) < 0)
+ return -1;
+
+ dst = (*pskb)->dst;
+ if (dst->xfrm)
+ dst = ((struct xfrm_dst *)dst)->route;
+ dst_hold(dst);
+
+ if (xfrm_lookup(&dst, &fl, (*pskb)->sk, 0) < 0)
+ return -1;
+
+ dst_release((*pskb)->dst);
+ (*pskb)->dst = dst;
+
+ /* Change in oif may mean change in hh_len. */
+ hh_len = (*pskb)->dst->dev->hard_header_len;
+ if (skb_headroom(*pskb) < hh_len) {
+ struct sk_buff *nskb;
+
+ nskb = skb_realloc_headroom(*pskb, hh_len);
+ if (!nskb)
+ return -1;
+ if ((*pskb)->sk)
+ skb_set_owner_w(nskb, (*pskb)->sk);
+ kfree_skb(*pskb);
+ *pskb = nskb;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(ip_xfrm_me_harder);
+#endif
+
void (*ip_nat_decode_session)(struct sk_buff *, struct flowi *);
EXPORT_SYMBOL(ip_nat_decode_session);
return NF_ACCEPT;
ret = ip_nat_fn(hooknum, pskb, in, out, okfn);
+#ifdef CONFIG_XFRM
if (ret != NF_DROP && ret != NF_STOLEN
&& (ct = ip_conntrack_get(*pskb, &ctinfo)) != NULL) {
enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
if (ct->tuplehash[dir].tuple.src.ip !=
ct->tuplehash[!dir].tuple.dst.ip
-#ifdef CONFIG_XFRM
|| ct->tuplehash[dir].tuple.src.u.all !=
ct->tuplehash[!dir].tuple.dst.u.all
-#endif
)
- return ip_route_me_harder(pskb) == 0 ? ret : NF_DROP;
+ return ip_xfrm_me_harder(pskb) == 0 ? ret : NF_DROP;
}
+#endif
return ret;
}
goto cleanup_localinops;
}
#endif
-
- /* For use by REJECT target */
- ip_ct_attach = __nf_conntrack_attach;
-
return ret;
cleanup:
synchronize_net();
- ip_ct_attach = NULL;
#ifdef CONFIG_SYSCTL
unregister_sysctl_table(nf_ct_ipv4_sysctl_header);
cleanup_localinops:
tp->rcvq_space.space = space;
- if (sysctl_tcp_moderate_rcvbuf) {
+ if (sysctl_tcp_moderate_rcvbuf &&
+ !(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
int new_clamp = space;
/* Receive space grows, normalize in order to
goto out_exit;
}
-int xfrm4_output_finish(struct sk_buff *skb)
+static int xfrm4_output_finish(struct sk_buff *skb)
{
int err;
+#ifdef CONFIG_NETFILTER
+ if (!skb->dst->xfrm) {
+ IPCB(skb)->flags |= IPSKB_REROUTED;
+ return dst_output(skb);
+ }
+#endif
while (likely((err = xfrm4_output_one(skb)) == 0)) {
nf_reset(skb);
int xfrm4_output(struct sk_buff *skb)
{
- return NF_HOOK(PF_INET, NF_IP_POST_ROUTING, skb, NULL, skb->dst->dev,
- xfrm4_output_finish);
+ return NF_HOOK_COND(PF_INET, NF_IP_POST_ROUTING, skb, NULL, skb->dst->dev,
+ xfrm4_output_finish,
+ !(IPCB(skb)->flags & IPSKB_REROUTED));
}
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/init.h>
+#include <linux/netfilter.h>
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
struct icmpv6_msg {
struct sk_buff *skb;
int offset;
+ uint8_t type;
};
static int icmpv6_getfrag(void *from, char *to, int offset, int len, int odd, struct sk_buff *skb)
csum = skb_copy_and_csum_bits(org_skb, msg->offset + offset,
to, len, csum);
skb->csum = csum_block_add(skb->csum, csum, odd);
+ if (!(msg->type & ICMPV6_INFOMSG_MASK))
+ nf_ct_attach(skb, org_skb);
return 0;
}
msg.skb = skb;
msg.offset = skb->nh.raw - skb->data;
+ msg.type = type;
len = skb->len - msg.offset;
len = min_t(unsigned int, len, IPV6_MIN_MTU - sizeof(struct ipv6hdr) -sizeof(struct icmp6hdr));
msg.skb = skb;
msg.offset = 0;
+ msg.type = ICMPV6_ECHO_REPLY;
err = ip6_append_data(sk, icmpv6_getfrag, &msg, skb->len + sizeof(struct icmp6hdr),
sizeof(struct icmp6hdr), hlimit, tclass, NULL, &fl,
csum_partial((char *)tcph,
sizeof(struct tcphdr), 0));
+ nf_ct_attach(nskb, oldskb);
+
NF_HOOK(PF_INET6, NF_IP6_LOCAL_OUT, nskb, NULL, nskb->dst->dev,
dst_output);
}
err = rawv6_push_pending_frames(sk, &fl, rp);
}
done:
- ip6_dst_store(sk, dst,
- ipv6_addr_equal(&fl.fl6_dst, &np->daddr) ?
- &np->daddr : NULL);
-
+ dst_release(dst);
release_sock(sk);
out:
fl6_sock_release(flowlabel);
static void irda_device_setup(struct net_device *dev)
{
dev->hard_header_len = 0;
- dev->addr_len = 0;
+ dev->addr_len = LAP_ALEN;
dev->type = ARPHRD_IRDA;
dev->tx_queue_len = 8; /* Window size + 1 s-frame */
- memset(dev->broadcast, 0xff, 4);
+ memset(dev->broadcast, 0xff, LAP_ALEN);
dev->mtu = 2048;
dev->flags = IFF_NOARP;
{
/* Yes !!! Get it.. */
strlcpy(self->rname, discoveries[i].info, sizeof(self->rname));
- self->rname[NICKNAME_MAX_LEN + 1] = '\0';
+ self->rname[sizeof(self->rname) - 1] = '\0';
DEBUG(IRDA_SERV_INFO, "Device 0x%08x is in fact ``%s''.\n",
self->daddr, self->rname);
kfree(discoveries);
help
This option enables support for a netlink-based userspace interface
-endmenu
-
config NETFILTER_XTABLES
tristate "Netfilter Xtables support (required for ip_tables)"
help
tristate '"CONNMARK" target support'
depends on NETFILTER_XTABLES
depends on IP_NF_MANGLE || IP6_NF_MANGLE
- depends on (IP_NF_CONNTRACK && IP_NF_CONNTRACK_MARK) || (NF_CONNTRACK_MARK && NF_CONNTRACK_IPV4)
+ depends on (IP_NF_CONNTRACK && IP_NF_CONNTRACK_MARK) || (NF_CONNTRACK_MARK && NF_CONNTRACK)
help
This option adds a `CONNMARK' target, which allows one to manipulate
the connection mark value. Similar to the MARK target, but
config NETFILTER_XT_MATCH_CONNBYTES
tristate '"connbytes" per-connection counter match support'
depends on NETFILTER_XTABLES
- depends on (IP_NF_CONNTRACK && IP_NF_CT_ACCT) || NF_CT_ACCT
+ depends on (IP_NF_CONNTRACK && IP_NF_CT_ACCT) || (NF_CT_ACCT && NF_CONNTRACK)
help
This option adds a `connbytes' match, which allows you to match the
number of bytes and/or packets for each direction within a connection.
config NETFILTER_XT_MATCH_CONNMARK
tristate '"connmark" connection mark match support'
depends on NETFILTER_XTABLES
- depends on (IP_NF_CONNTRACK && IP_NF_CONNTRACK_MARK) || NF_CONNTRACK_MARK
+ depends on (IP_NF_CONNTRACK && IP_NF_CONNTRACK_MARK) || (NF_CONNTRACK_MARK && NF_CONNTRACK)
help
This option adds a `connmark' match, which allows you to match the
connection mark value previously set for the session by `CONNMARK'.
To compile it as a module, choose M here. If unsure, say N.
+endmenu
+
{
int i;
+ ip_ct_attach = NULL;
+
/* This makes sure all current packets have passed through
netfilter framework. Roll on, two-stage module
delete... */
nf_ct_l3protos[i] = &nf_conntrack_generic_l3proto;
write_unlock_bh(&nf_conntrack_lock);
+ /* For use by REJECT target */
+ ip_ct_attach = __nf_conntrack_attach;
+
/* Set up fake conntrack:
- to never be deleted, not in any hashes */
atomic_set(&nf_conntrack_untracked.ct_general.use, 1);
{
return csum_ipv6_magic(&skb->nh.ipv6h->saddr, &skb->nh.ipv6h->daddr,
skb->len - dataoff, IPPROTO_TCP,
- skb->ip_summed == CHECKSUM_HW ? skb->csum
+ skb->ip_summed == CHECKSUM_HW
+ ? csum_sub(skb->csum,
+ skb_checksum(skb, 0, dataoff, 0))
: skb_checksum(skb, dataoff, skb->len - dataoff,
0));
}
{
return csum_ipv6_magic(&skb->nh.ipv6h->saddr, &skb->nh.ipv6h->daddr,
skb->len - dataoff, IPPROTO_UDP,
- skb->ip_summed == CHECKSUM_HW ? skb->csum
+ skb->ip_summed == CHECKSUM_HW
+ ? csum_sub(skb->csum,
+ skb_checksum(skb, 0, dataoff, 0))
: skb_checksum(skb, dataoff, skb->len - dataoff,
0));
}
* 0: continue
* 1: repeat lookup - reference dropped while waiting for socket memory.
*/
-int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, long timeo)
+int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
+ long timeo, struct sock *ssk)
{
struct netlink_sock *nlk;
test_bit(0, &nlk->state)) {
DECLARE_WAITQUEUE(wait, current);
if (!timeo) {
- if (!nlk->pid)
+ if (!ssk || nlk_sk(ssk)->pid == 0)
netlink_overrun(sk);
sock_put(sk);
kfree_skb(skb);
kfree_skb(skb);
return PTR_ERR(sk);
}
- err = netlink_attachskb(sk, skb, nonblock, timeo);
+ err = netlink_attachskb(sk, skb, nonblock, timeo, ssk);
if (err == 1)
goto retry;
if (err)
sizeof(struct nlattr *), GFP_KERNEL);
if (family->attrbuf == NULL) {
err = -ENOMEM;
- goto errout;
+ goto errout_locked;
}
} else
family->attrbuf = NULL;
return -ENOENT;
}
-static inline int genl_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,
+static int genl_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,
int *errp)
{
struct genl_ops *ops;
do {
if (genl_trylock())
return;
- netlink_run_queue(sk, &qlen, &genl_rcv_msg);
+ netlink_run_queue(sk, &qlen, genl_rcv_msg);
genl_unlock();
} while (qlen && genl_sock && genl_sock->sk_receive_queue.qlen);
}
netlink_set_nonroot(NETLINK_GENERIC, NL_NONROOT_RECV);
genl_sock = netlink_kernel_create(NETLINK_GENERIC, GENL_MAX_ID,
genl_rcv, THIS_MODULE);
- if (genl_sock == NULL) {
+ if (genl_sock == NULL)
panic("GENL: Cannot initialize generic netlink\n");
- return -ENOMEM;
- }
return 0;
genl_unregister_family(&genl_ctrl);
errout:
panic("GENL: Cannot register controller: %d\n", err);
- return err;
}
subsys_initcall(genl_init);
xfrm_pol_put(policy);
if (dst)
dst_free(dst);
- goto restart;
+
+ err = -EHOSTUNREACH;
+ goto error;
}
dst->next = policy->bundles;
policy->bundles = dst;
then echo yes ; \
else echo no ; fi)
ifeq ($(KBUILD_HAVE_NLS),no)
- HOSTCFLAGS += -DKBUILD_NO_NLS
-else
- KBUILD_NEED_LINTL := $(shell \
- if echo -e "\#include <libintl.h>\nint main(int a, char** b) { gettext(\"\"); return 0; }\n" | \
- $(HOSTCC) $(HOSTCFLAGS) -x c - -o /dev/null> /dev/null 2>&1 ; \
- then echo no ; \
- else echo yes ; fi)
- ifeq ($(KBUILD_NEED_LINTL),yes)
- HOSTLOADLIBES_conf += -lintl
- HOSTLOADLIBES_mconf += -lintl
- endif
+HOSTCFLAGS += -DKBUILD_NO_NLS
endif
# generated files seem to need this to find local include files
projects / karo-tx-linux.git / commitdiff