--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _RTL8188E_XMIT_C_
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <wifi.h>
+#include <osdep_intf.h>
+#include <usb_ops.h>
+#include <rtl8188e_hal.h>
+
+s32 rtl8188eu_init_xmit_priv(struct adapter *adapt)
+{
+ struct xmit_priv *pxmitpriv = &adapt->xmitpriv;
+
+ tasklet_init(&pxmitpriv->xmit_tasklet,
+ (void(*)(unsigned long))rtl8188eu_xmit_tasklet,
+ (unsigned long)adapt);
+ return _SUCCESS;
+}
+
+void rtl8188eu_free_xmit_priv(struct adapter *adapt)
+{
+}
+
+static u8 urb_zero_packet_chk(struct adapter *adapt, int sz)
+{
+ u8 set_tx_desc_offset;
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ set_tx_desc_offset = (((sz + TXDESC_SIZE) % haldata->UsbBulkOutSize) == 0) ? 1 : 0;
+
+ return set_tx_desc_offset;
+}
+
+static void rtl8188eu_cal_txdesc_chksum(struct tx_desc *ptxdesc)
+{
+ u16 *usptr = (u16 *)ptxdesc;
+ u32 count = 16; /* (32 bytes / 2 bytes per XOR) => 16 times */
+ u32 index;
+ u16 checksum = 0;
+
+ /* Clear first */
+ ptxdesc->txdw7 &= cpu_to_le32(0xffff0000);
+
+ for (index = 0; index < count; index++)
+ checksum = checksum ^ le16_to_cpu(*(__le16 *)(usptr + index));
+ ptxdesc->txdw7 |= cpu_to_le32(0x0000ffff & checksum);
+}
+
+/* Description: In normal chip, we should send some packet to Hw which will be used by Fw */
+/* in FW LPS mode. The function is to fill the Tx descriptor of this packets, then */
+/* Fw can tell Hw to send these packet derectly. */
+void rtl8188e_fill_fake_txdesc(struct adapter *adapt, u8 *desc, u32 BufferLen, u8 ispspoll, u8 is_btqosnull)
+{
+ struct tx_desc *ptxdesc;
+
+ /* Clear all status */
+ ptxdesc = (struct tx_desc *)desc;
+ _rtw_memset(desc, 0, TXDESC_SIZE);
+
+ /* offset 0 */
+ ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG); /* own, bFirstSeg, bLastSeg; */
+
+ ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000); /* 32 bytes for TX Desc */
+
+ ptxdesc->txdw0 |= cpu_to_le32(BufferLen&0x0000ffff); /* Buffer size + command header */
+
+ /* offset 4 */
+ ptxdesc->txdw1 |= cpu_to_le32((QSLT_MGNT<<QSEL_SHT)&0x00001f00); /* Fixed queue of Mgnt queue */
+
+ /* Set NAVUSEHDR to prevent Ps-poll AId filed to be changed to error vlaue by Hw. */
+ if (ispspoll) {
+ ptxdesc->txdw1 |= cpu_to_le32(NAVUSEHDR);
+ } else {
+ ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); /* Hw set sequence number */
+ ptxdesc->txdw3 |= cpu_to_le32((8 << 28)); /* set bit3 to 1. Suugested by TimChen. 2009.12.29. */
+ }
+
+ if (is_btqosnull)
+ ptxdesc->txdw2 |= cpu_to_le32(BIT(23)); /* BT NULL */
+
+ /* offset 16 */
+ ptxdesc->txdw4 |= cpu_to_le32(BIT(8));/* driver uses rate */
+
+ /* USB interface drop packet if the checksum of descriptor isn't correct. */
+ /* Using this checksum can let hardware recovery from packet bulk out error (e.g. Cancel URC, Bulk out error.). */
+ rtl8188eu_cal_txdesc_chksum(ptxdesc);
+}
+
+static void fill_txdesc_sectype(struct pkt_attrib *pattrib, struct tx_desc *ptxdesc)
+{
+ if ((pattrib->encrypt > 0) && !pattrib->bswenc) {
+ switch (pattrib->encrypt) {
+ /* SEC_TYPE : 0:NO_ENC,1:WEP40/TKIP,2:WAPI,3:AES */
+ case _WEP40_:
+ case _WEP104_:
+ ptxdesc->txdw1 |= cpu_to_le32((0x01<<SEC_TYPE_SHT)&0x00c00000);
+ ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT);
+ break;
+ case _TKIP_:
+ case _TKIP_WTMIC_:
+ ptxdesc->txdw1 |= cpu_to_le32((0x01<<SEC_TYPE_SHT)&0x00c00000);
+ ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT);
+ break;
+ case _AES_:
+ ptxdesc->txdw1 |= cpu_to_le32((0x03<<SEC_TYPE_SHT)&0x00c00000);
+ ptxdesc->txdw2 |= cpu_to_le32(0x7 << AMPDU_DENSITY_SHT);
+ break;
+ case _NO_PRIVACY_:
+ default:
+ break;
+ }
+ }
+}
+
+static void fill_txdesc_vcs(struct pkt_attrib *pattrib, __le32 *pdw)
+{
+ switch (pattrib->vcs_mode) {
+ case RTS_CTS:
+ *pdw |= cpu_to_le32(RTS_EN);
+ break;
+ case CTS_TO_SELF:
+ *pdw |= cpu_to_le32(CTS_2_SELF);
+ break;
+ case NONE_VCS:
+ default:
+ break;
+ }
+ if (pattrib->vcs_mode) {
+ *pdw |= cpu_to_le32(HW_RTS_EN);
+ /* Set RTS BW */
+ if (pattrib->ht_en) {
+ *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(27)) : 0;
+
+ if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
+ *pdw |= cpu_to_le32((0x01 << 28) & 0x30000000);
+ else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER)
+ *pdw |= cpu_to_le32((0x02 << 28) & 0x30000000);
+ else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE)
+ *pdw |= 0;
+ else
+ *pdw |= cpu_to_le32((0x03 << 28) & 0x30000000);
+ }
+ }
+}
+
+static void fill_txdesc_phy(struct pkt_attrib *pattrib, __le32 *pdw)
+{
+ if (pattrib->ht_en) {
+ *pdw |= (pattrib->bwmode&HT_CHANNEL_WIDTH_40) ? cpu_to_le32(BIT(25)) : 0;
+
+ if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_LOWER)
+ *pdw |= cpu_to_le32((0x01 << DATA_SC_SHT) & 0x003f0000);
+ else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_UPPER)
+ *pdw |= cpu_to_le32((0x02 << DATA_SC_SHT) & 0x003f0000);
+ else if (pattrib->ch_offset == HAL_PRIME_CHNL_OFFSET_DONT_CARE)
+ *pdw |= 0;
+ else
+ *pdw |= cpu_to_le32((0x03 << DATA_SC_SHT) & 0x003f0000);
+ }
+}
+
+static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bagg_pkt)
+{
+ int pull = 0;
+ uint qsel;
+ u8 data_rate, pwr_status, offset;
+ struct adapter *adapt = pxmitframe->padapter;
+ struct pkt_attrib *pattrib = &pxmitframe->attrib;
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ struct tx_desc *ptxdesc = (struct tx_desc *)pmem;
+ struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
+ struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
+ int bmcst = IS_MCAST(pattrib->ra);
+
+ if (adapt->registrypriv.mp_mode == 0) {
+ if ((!bagg_pkt) && (urb_zero_packet_chk(adapt, sz) == 0)) {
+ ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ);
+ pull = 1;
+ }
+ }
+
+ _rtw_memset(ptxdesc, 0, sizeof(struct tx_desc));
+
+ /* 4 offset 0 */
+ ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
+ ptxdesc->txdw0 |= cpu_to_le32(sz & 0x0000ffff);/* update TXPKTSIZE */
+
+ offset = TXDESC_SIZE + OFFSET_SZ;
+
+ ptxdesc->txdw0 |= cpu_to_le32(((offset) << OFFSET_SHT) & 0x00ff0000);/* 32 bytes for TX Desc */
+
+ if (bmcst)
+ ptxdesc->txdw0 |= cpu_to_le32(BMC);
+
+ if (adapt->registrypriv.mp_mode == 0) {
+ if (!bagg_pkt) {
+ if ((pull) && (pxmitframe->pkt_offset > 0))
+ pxmitframe->pkt_offset = pxmitframe->pkt_offset - 1;
+ }
+ }
+
+ /* pkt_offset, unit:8 bytes padding */
+ if (pxmitframe->pkt_offset > 0)
+ ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000);
+
+ /* driver uses rate */
+ ptxdesc->txdw4 |= cpu_to_le32(USERATE);/* rate control always by driver */
+
+ if ((pxmitframe->frame_tag & 0x0f) == DATA_FRAMETAG) {
+ /* offset 4 */
+ ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3F);
+
+ qsel = (uint)(pattrib->qsel & 0x0000001f);
+ ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
+
+ ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000F0000);
+
+ fill_txdesc_sectype(pattrib, ptxdesc);
+
+ if (pattrib->ampdu_en) {
+ ptxdesc->txdw2 |= cpu_to_le32(AGG_EN);/* AGG EN */
+ ptxdesc->txdw6 = cpu_to_le32(0x6666f800);
+ } else {
+ ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */
+ }
+
+ /* offset 8 */
+
+ /* offset 12 */
+ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0FFF0000);
+
+ /* offset 16 , offset 20 */
+ if (pattrib->qos_en)
+ ptxdesc->txdw4 |= cpu_to_le32(QOS);/* QoS */
+
+ /* offset 20 */
+ if (pxmitframe->agg_num > 1)
+ ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << USB_TXAGG_NUM_SHT) & 0xFF000000);
+
+ if ((pattrib->ether_type != 0x888e) &&
+ (pattrib->ether_type != 0x0806) &&
+ (pattrib->ether_type != 0x88b4) &&
+ (pattrib->dhcp_pkt != 1)) {
+ /* Non EAP & ARP & DHCP type data packet */
+
+ fill_txdesc_vcs(pattrib, &ptxdesc->txdw4);
+ fill_txdesc_phy(pattrib, &ptxdesc->txdw4);
+
+ ptxdesc->txdw4 |= cpu_to_le32(0x00000008);/* RTS Rate=24M */
+ ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);/* DATA/RTS Rate FB LMT */
+
+ if (pattrib->ht_en) {
+ if (ODM_RA_GetShortGI_8188E(&haldata->odmpriv, pattrib->mac_id))
+ ptxdesc->txdw5 |= cpu_to_le32(SGI);/* SGI */
+ }
+ data_rate = ODM_RA_GetDecisionRate_8188E(&haldata->odmpriv, pattrib->mac_id);
+ ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F);
+ pwr_status = ODM_RA_GetHwPwrStatus_8188E(&haldata->odmpriv, pattrib->mac_id);
+ ptxdesc->txdw4 |= cpu_to_le32((pwr_status & 0x7) << PWR_STATUS_SHT);
+ } else {
+ /* EAP data packet and ARP packet and DHCP. */
+ /* Use the 1M data rate to send the EAP/ARP packet. */
+ /* This will maybe make the handshake smooth. */
+ ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */
+ if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT)
+ ptxdesc->txdw4 |= cpu_to_le32(BIT(24));/* DATA_SHORT */
+ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
+ }
+ } else if ((pxmitframe->frame_tag&0x0f) == MGNT_FRAMETAG) {
+ /* offset 4 */
+ ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3f);
+
+ qsel = (uint)(pattrib->qsel&0x0000001f);
+ ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
+
+ ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000f0000);
+
+ /* offset 8 */
+ /* CCX-TXRPT ack for xmit mgmt frames. */
+ if (pxmitframe->ack_report)
+ ptxdesc->txdw2 |= cpu_to_le32(BIT(19));
+
+ /* offset 12 */
+ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0FFF0000);
+
+ /* offset 20 */
+ ptxdesc->txdw5 |= cpu_to_le32(RTY_LMT_EN);/* retry limit enable */
+ if (pattrib->retry_ctrl)
+ ptxdesc->txdw5 |= cpu_to_le32(0x00180000);/* retry limit = 6 */
+ else
+ ptxdesc->txdw5 |= cpu_to_le32(0x00300000);/* retry limit = 12 */
+
+ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
+ } else if ((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG) {
+ DBG_88E("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
+ } else if (((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) &&
+ (adapt->registrypriv.mp_mode == 1)) {
+ fill_txdesc_for_mp(adapt, ptxdesc);
+ } else {
+ DBG_88E("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);
+
+ /* offset 4 */
+ ptxdesc->txdw1 |= cpu_to_le32((4) & 0x3f);/* CAM_ID(MAC_ID) */
+
+ ptxdesc->txdw1 |= cpu_to_le32((6 << RATE_ID_SHT) & 0x000f0000);/* raid */
+
+ /* offset 8 */
+
+ /* offset 12 */
+ ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0fff0000);
+
+ /* offset 20 */
+ ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
+ }
+
+ /* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
+ /* (1) The sequence number of each non-Qos frame / broadcast / multicast / */
+ /* mgnt frame should be controled by Hw because Fw will also send null data */
+ /* which we cannot control when Fw LPS enable. */
+ /* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
+ /* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
+ /* (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. */
+ /* 2010.06.23. Added by tynli. */
+ if (!pattrib->qos_en) {
+ ptxdesc->txdw3 |= cpu_to_le32(EN_HWSEQ); /* Hw set sequence number */
+ ptxdesc->txdw4 |= cpu_to_le32(HW_SSN); /* Hw set sequence number */
+ }
+
+ ODM_SetTxAntByTxInfo_88E(&haldata->odmpriv, pmem, pattrib->mac_id);
+
+ rtl8188eu_cal_txdesc_chksum(ptxdesc);
+ _dbg_dump_tx_info(adapt, pxmitframe->frame_tag, ptxdesc);
+ return pull;
+}
+
+/* for non-agg data frame or management frame */
+static s32 rtw_dump_xframe(struct adapter *adapt, struct xmit_frame *pxmitframe)
+{
+ s32 ret = _SUCCESS;
+ s32 inner_ret = _SUCCESS;
+ int t, sz, w_sz, pull = 0;
+ u8 *mem_addr;
+ u32 ff_hwaddr;
+ struct xmit_buf *pxmitbuf = pxmitframe->pxmitbuf;
+ struct pkt_attrib *pattrib = &pxmitframe->attrib;
+ struct xmit_priv *pxmitpriv = &adapt->xmitpriv;
+ struct security_priv *psecuritypriv = &adapt->securitypriv;
+ if ((pxmitframe->frame_tag == DATA_FRAMETAG) &&
+ (pxmitframe->attrib.ether_type != 0x0806) &&
+ (pxmitframe->attrib.ether_type != 0x888e) &&
+ (pxmitframe->attrib.ether_type != 0x88b4) &&
+ (pxmitframe->attrib.dhcp_pkt != 1))
+ rtw_issue_addbareq_cmd(adapt, pxmitframe);
+ mem_addr = pxmitframe->buf_addr;
+
+ RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_dump_xframe()\n"));
+
+ for (t = 0; t < pattrib->nr_frags; t++) {
+ if (inner_ret != _SUCCESS && ret == _SUCCESS)
+ ret = _FAIL;
+
+ if (t != (pattrib->nr_frags - 1)) {
+ RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("pattrib->nr_frags=%d\n", pattrib->nr_frags));
+
+ sz = pxmitpriv->frag_len;
+ sz = sz - 4 - (psecuritypriv->sw_encrypt ? 0 : pattrib->icv_len);
+ } else {
+ /* no frag */
+ sz = pattrib->last_txcmdsz;
+ }
+
+ pull = update_txdesc(pxmitframe, mem_addr, sz, false);
+
+ if (pull) {
+ mem_addr += PACKET_OFFSET_SZ; /* pull txdesc head */
+ pxmitframe->buf_addr = mem_addr;
+ w_sz = sz + TXDESC_SIZE;
+ } else {
+ w_sz = sz + TXDESC_SIZE + PACKET_OFFSET_SZ;
+ }
+ ff_hwaddr = rtw_get_ff_hwaddr(pxmitframe);
+
+ inner_ret = rtw_write_port(adapt, ff_hwaddr, w_sz, (unsigned char *)pxmitbuf);
+
+ rtw_count_tx_stats(adapt, pxmitframe, sz);
+
+ RT_TRACE(_module_rtl871x_xmit_c_, _drv_info_, ("rtw_write_port, w_sz=%d\n", w_sz));
+
+ mem_addr += w_sz;
+
+ mem_addr = (u8 *)RND4(((size_t)(mem_addr)));
+ }
+
+ rtw_free_xmitframe(pxmitpriv, pxmitframe);
+
+ if (ret != _SUCCESS)
+ rtw_sctx_done_err(&pxmitbuf->sctx, RTW_SCTX_DONE_UNKNOWN);
+
+ return ret;
+}
+
+static u32 xmitframe_need_length(struct xmit_frame *pxmitframe)
+{
+ struct pkt_attrib *pattrib = &pxmitframe->attrib;
+
+ u32 len = 0;
+
+ /* no consider fragement */
+ len = pattrib->hdrlen + pattrib->iv_len +
+ SNAP_SIZE + sizeof(u16) +
+ pattrib->pktlen +
+ ((pattrib->bswenc) ? pattrib->icv_len : 0);
+
+ if (pattrib->encrypt == _TKIP_)
+ len += 8;
+
+ return len;
+}
+
+s32 rtl8188eu_xmitframe_complete(struct adapter *adapt, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
+{
+ struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
+ struct xmit_frame *pxmitframe = NULL;
+ struct xmit_frame *pfirstframe = NULL;
+
+ /* aggregate variable */
+ struct hw_xmit *phwxmit;
+ struct sta_info *psta = NULL;
+ struct tx_servq *ptxservq = NULL;
+
+ unsigned long irql;
+ struct list_head *xmitframe_plist = NULL, *xmitframe_phead = NULL;
+
+ u32 pbuf; /* next pkt address */
+ u32 pbuf_tail; /* last pkt tail */
+ u32 len; /* packet length, except TXDESC_SIZE and PKT_OFFSET */
+
+ u32 bulksize = haldata->UsbBulkOutSize;
+ u8 desc_cnt;
+ u32 bulkptr;
+
+ /* dump frame variable */
+ u32 ff_hwaddr;
+
+ RT_TRACE(_module_rtl8192c_xmit_c_, _drv_info_, ("+xmitframe_complete\n"));
+
+ /* check xmitbuffer is ok */
+ if (pxmitbuf == NULL) {
+ pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
+ if (pxmitbuf == NULL)
+ return false;
+ }
+
+ /* 3 1. pick up first frame */
+ do {
+ rtw_free_xmitframe(pxmitpriv, pxmitframe);
+
+ pxmitframe = rtw_dequeue_xframe(pxmitpriv, pxmitpriv->hwxmits, pxmitpriv->hwxmit_entry);
+ if (pxmitframe == NULL) {
+ /* no more xmit frame, release xmit buffer */
+ rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
+ return false;
+ }
+
+ pxmitframe->pxmitbuf = pxmitbuf;
+ pxmitframe->buf_addr = pxmitbuf->pbuf;
+ pxmitbuf->priv_data = pxmitframe;
+
+ pxmitframe->agg_num = 1; /* alloc xmitframe should assign to 1. */
+ pxmitframe->pkt_offset = 1; /* first frame of aggregation, reserve offset */
+
+ rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe);
+
+ /* always return ndis_packet after rtw_xmitframe_coalesce */
+ rtw_os_xmit_complete(adapt, pxmitframe);
+
+ break;
+ } while (1);
+
+ /* 3 2. aggregate same priority and same DA(AP or STA) frames */
+ pfirstframe = pxmitframe;
+ len = xmitframe_need_length(pfirstframe) + TXDESC_SIZE + (pfirstframe->pkt_offset*PACKET_OFFSET_SZ);
+ pbuf_tail = len;
+ pbuf = _RND8(pbuf_tail);
+
+ /* check pkt amount in one bulk */
+ desc_cnt = 0;
+ bulkptr = bulksize;
+ if (pbuf < bulkptr) {
+ desc_cnt++;
+ } else {
+ desc_cnt = 0;
+ bulkptr = ((pbuf / bulksize) + 1) * bulksize; /* round to next bulksize */
+ }
+
+ /* dequeue same priority packet from station tx queue */
+ psta = pfirstframe->attrib.psta;
+ switch (pfirstframe->attrib.priority) {
+ case 1:
+ case 2:
+ ptxservq = &(psta->sta_xmitpriv.bk_q);
+ phwxmit = pxmitpriv->hwxmits + 3;
+ break;
+ case 4:
+ case 5:
+ ptxservq = &(psta->sta_xmitpriv.vi_q);
+ phwxmit = pxmitpriv->hwxmits + 1;
+ break;
+ case 6:
+ case 7:
+ ptxservq = &(psta->sta_xmitpriv.vo_q);
+ phwxmit = pxmitpriv->hwxmits;
+ break;
+ case 0:
+ case 3:
+ default:
+ ptxservq = &(psta->sta_xmitpriv.be_q);
+ phwxmit = pxmitpriv->hwxmits + 2;
+ break;
+ }
+ _enter_critical_bh(&pxmitpriv->lock, &irql);
+
+ xmitframe_phead = get_list_head(&ptxservq->sta_pending);
+ xmitframe_plist = get_next(xmitframe_phead);
+
+ while (!rtw_end_of_queue_search(xmitframe_phead, xmitframe_plist)) {
+ pxmitframe = LIST_CONTAINOR(xmitframe_plist, struct xmit_frame, list);
+ xmitframe_plist = get_next(xmitframe_plist);
+
+ pxmitframe->agg_num = 0; /* not first frame of aggregation */
+ pxmitframe->pkt_offset = 0; /* not first frame of aggregation, no need to reserve offset */
+
+ len = xmitframe_need_length(pxmitframe) + TXDESC_SIZE + (pxmitframe->pkt_offset*PACKET_OFFSET_SZ);
+
+ if (_RND8(pbuf + len) > MAX_XMITBUF_SZ) {
+ pxmitframe->agg_num = 1;
+ pxmitframe->pkt_offset = 1;
+ break;
+ }
+ rtw_list_delete(&pxmitframe->list);
+ ptxservq->qcnt--;
+ phwxmit->accnt--;
+
+ pxmitframe->buf_addr = pxmitbuf->pbuf + pbuf;
+
+ rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe);
+ /* always return ndis_packet after rtw_xmitframe_coalesce */
+ rtw_os_xmit_complete(adapt, pxmitframe);
+
+ /* (len - TXDESC_SIZE) == pxmitframe->attrib.last_txcmdsz */
+ update_txdesc(pxmitframe, pxmitframe->buf_addr, pxmitframe->attrib.last_txcmdsz, true);
+
+ /* don't need xmitframe any more */
+ rtw_free_xmitframe(pxmitpriv, pxmitframe);
+
+ /* handle pointer and stop condition */
+ pbuf_tail = pbuf + len;
+ pbuf = _RND8(pbuf_tail);
+
+ pfirstframe->agg_num++;
+ if (MAX_TX_AGG_PACKET_NUMBER == pfirstframe->agg_num)
+ break;
+
+ if (pbuf < bulkptr) {
+ desc_cnt++;
+ if (desc_cnt == haldata->UsbTxAggDescNum)
+ break;
+ } else {
+ desc_cnt = 0;
+ bulkptr = ((pbuf / bulksize) + 1) * bulksize;
+ }
+ } /* end while (aggregate same priority and same DA(AP or STA) frames) */
+
+ if (_rtw_queue_empty(&ptxservq->sta_pending) == true)
+ rtw_list_delete(&ptxservq->tx_pending);
+
+ _exit_critical_bh(&pxmitpriv->lock, &irql);
+ if ((pfirstframe->attrib.ether_type != 0x0806) &&
+ (pfirstframe->attrib.ether_type != 0x888e) &&
+ (pfirstframe->attrib.ether_type != 0x88b4) &&
+ (pfirstframe->attrib.dhcp_pkt != 1))
+ rtw_issue_addbareq_cmd(adapt, pfirstframe);
+ /* 3 3. update first frame txdesc */
+ if ((pbuf_tail % bulksize) == 0) {
+ /* remove pkt_offset */
+ pbuf_tail -= PACKET_OFFSET_SZ;
+ pfirstframe->buf_addr += PACKET_OFFSET_SZ;
+ pfirstframe->pkt_offset--;
+ }
+
+ update_txdesc(pfirstframe, pfirstframe->buf_addr, pfirstframe->attrib.last_txcmdsz, true);
+
+ /* 3 4. write xmit buffer to USB FIFO */
+ ff_hwaddr = rtw_get_ff_hwaddr(pfirstframe);
+ rtw_write_port(adapt, ff_hwaddr, pbuf_tail, (u8 *)pxmitbuf);
+
+ /* 3 5. update statisitc */
+ pbuf_tail -= (pfirstframe->agg_num * TXDESC_SIZE);
+ pbuf_tail -= (pfirstframe->pkt_offset * PACKET_OFFSET_SZ);
+
+ rtw_count_tx_stats(adapt, pfirstframe, pbuf_tail);
+
+ rtw_free_xmitframe(pxmitpriv, pfirstframe);
+
+ return true;
+}
+
+static s32 xmitframe_direct(struct adapter *adapt, struct xmit_frame *pxmitframe)
+{
+ s32 res = _SUCCESS;
+
+ res = rtw_xmitframe_coalesce(adapt, pxmitframe->pkt, pxmitframe);
+ if (res == _SUCCESS)
+ rtw_dump_xframe(adapt, pxmitframe);
+ else
+ DBG_88E("==> %s xmitframe_coalsece failed\n", __func__);
+ return res;
+}
+
+/*
+ * Return
+ * true dump packet directly
+ * false enqueue packet
+ */
+static s32 pre_xmitframe(struct adapter *adapt, struct xmit_frame *pxmitframe)
+{
+ unsigned long irql;
+ s32 res;
+ struct xmit_buf *pxmitbuf = NULL;
+ struct xmit_priv *pxmitpriv = &adapt->xmitpriv;
+ struct pkt_attrib *pattrib = &pxmitframe->attrib;
+ struct mlme_priv *pmlmepriv = &adapt->mlmepriv;
+
+ _enter_critical_bh(&pxmitpriv->lock, &irql);
+
+ if (rtw_txframes_sta_ac_pending(adapt, pattrib) > 0)
+ goto enqueue;
+
+ if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == true)
+ goto enqueue;
+
+ pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
+ if (pxmitbuf == NULL)
+ goto enqueue;
+
+ _exit_critical_bh(&pxmitpriv->lock, &irql);
+
+ pxmitframe->pxmitbuf = pxmitbuf;
+ pxmitframe->buf_addr = pxmitbuf->pbuf;
+ pxmitbuf->priv_data = pxmitframe;
+
+ if (xmitframe_direct(adapt, pxmitframe) != _SUCCESS) {
+ rtw_free_xmitbuf(pxmitpriv, pxmitbuf);
+ rtw_free_xmitframe(pxmitpriv, pxmitframe);
+ }
+
+ return true;
+
+enqueue:
+ res = rtw_xmitframe_enqueue(adapt, pxmitframe);
+ _exit_critical_bh(&pxmitpriv->lock, &irql);
+
+ if (res != _SUCCESS) {
+ RT_TRACE(_module_xmit_osdep_c_, _drv_err_, ("pre_xmitframe: enqueue xmitframe fail\n"));
+ rtw_free_xmitframe(pxmitpriv, pxmitframe);
+
+ /* Trick, make the statistics correct */
+ pxmitpriv->tx_pkts--;
+ pxmitpriv->tx_drop++;
+ return true;
+ }
+
+ return false;
+}
+
+s32 rtl8188eu_mgnt_xmit(struct adapter *adapt, struct xmit_frame *pmgntframe)
+{
+ return rtw_dump_xframe(adapt, pmgntframe);
+}
+
+/*
+ * Return
+ * true dump packet directly ok
+ * false temporary can't transmit packets to hardware
+ */
+s32 rtl8188eu_hal_xmit(struct adapter *adapt, struct xmit_frame *pxmitframe)
+{
+ return pre_xmitframe(adapt, pxmitframe);
+}
projects / karo-tx-linux.git / commitdiff