--- /dev/null
+* Broadcom Keypad Controller device tree bindings
+
+Broadcom Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be "brcm,bcm-keypad"
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Board Specific Properties:
+- keypad,num-rows: Number of row lines connected to the keypad
+ controller.
+
+- keypad,num-columns: Number of column lines connected to the
+ keypad controller.
+
+- col-debounce-filter-period: The debounce period for the Column filter.
+
+ KEYPAD_DEBOUNCE_1_ms = 0
+ KEYPAD_DEBOUNCE_2_ms = 1
+ KEYPAD_DEBOUNCE_4_ms = 2
+ KEYPAD_DEBOUNCE_8_ms = 3
+ KEYPAD_DEBOUNCE_16_ms = 4
+ KEYPAD_DEBOUNCE_32_ms = 5
+ KEYPAD_DEBOUNCE_64_ms = 6
+ KEYPAD_DEBOUNCE_128_ms = 7
+
+- status-debounce-filter-period: The debounce period for the Status filter.
+
+ KEYPAD_DEBOUNCE_1_ms = 0
+ KEYPAD_DEBOUNCE_2_ms = 1
+ KEYPAD_DEBOUNCE_4_ms = 2
+ KEYPAD_DEBOUNCE_8_ms = 3
+ KEYPAD_DEBOUNCE_16_ms = 4
+ KEYPAD_DEBOUNCE_32_ms = 5
+ KEYPAD_DEBOUNCE_64_ms = 6
+ KEYPAD_DEBOUNCE_128_ms = 7
+
+- row-output-enabled: An optional property indicating whether the row or
+ column is being used as output. If specified the row is being used
+ as the output. Else defaults to column.
+
+- pull-up-enabled: An optional property indicating the Keypad scan mode.
+ If specified implies the keypad scan pull-up has been enabled.
+
+- autorepeat: Boolean, Enable auto repeat feature of Linux input
+ subsystem (optional).
+
+- linux,keymap: The keymap for keys as described in the binding document
+ devicetree/bindings/input/matrix-keymap.txt.
+
+Example:
+#include "dt-bindings/input/input.h"
+
+/ {
+ keypad: keypad@180ac000 {
+ /* Required SoC specific properties */
+ compatible = "brcm,bcm-keypad";
+
+ /* Required Board specific properties */
+ keypad,num-rows = <5>;
+ keypad,num-columns = <5>;
+ status = "okay";
+
+ linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
+ MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
+ MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */
+ MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */
+ MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */
+ MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */
+ MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */
+ MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */
+ MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */
+ MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */
+ MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */
+ MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */
+ MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */
+ MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */
+ MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */
+ MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */
+ MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */
+ MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */
+ MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */
+ MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */
+ MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */
+ MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */
+ MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */
+ >;
+
+ /* Optional board specific properties */
+ col-debounce-filter-period = <5>;
+ row-output-enabled;
+ pull-up-enabled;
+
+ };
+};
--- /dev/null
+Qualcomm PM8941 PMIC Power Key
+
+PROPERTIES
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,pm8941-pwrkey"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: base address of registers for block
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: key change interrupt; The format of the specifier is
+ defined by the binding document describing the node's
+ interrupt parent.
+
+- debounce:
+ Usage: optional
+ Value type: <u32>
+ Definition: time in microseconds that key must be pressed or released
+ for state change interrupt to trigger.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <empty>
+ Definition: presence of this property indicates that the KPDPWR_N pin
+ should be configured for pull up.
+
+EXAMPLE
+
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
--- /dev/null
+* Broadcom's IPROC Touchscreen Controller
+
+Required properties:
+- compatible: must be "brcm,iproc-touchscreen"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- clocks: The clock provided by the SOC to driver the tsc
+- clock-name: name for the clock
+- interrupts: The touchscreen controller's interrupt
+
+Optional properties:
+- scanning_period: Time between scans. Each step is 1024 us. Valid 1-256.
+- debounce_timeout: Each step is 512 us. Valid 0-255
+- settling_timeout: The settling duration (in ms) is the amount of time
+ the tsc waits to allow the voltage to settle after
+ turning on the drivers in detection mode.
+ Valid values: 0-11
+ 0 = 0.008 ms
+ 1 = 0.01 ms
+ 2 = 0.02 ms
+ 3 = 0.04 ms
+ 4 = 0.08 ms
+ 5 = 0.16 ms
+ 6 = 0.32 ms
+ 7 = 0.64 ms
+ 8 = 1.28 ms
+ 9 = 2.56 ms
+ 10 = 5.12 ms
+ 11 = 10.24 ms
+- touch_timeout: The continuous number of scan periods in which touch is
+ not detected before the controller returns to idle state.
+ Valid values 0-255.
+- average_data: Number of data samples which are averaged before a final
+ data point is placed into the FIFO
+ Valid values 0-7
+ 0 = 1 sample
+ 1 = 2 samples
+ 2 = 4 samples
+ 3 = 8 samples
+ 4 = 16 samples
+ 5 = 32 samples
+ 6 = 64 samples
+ 7 = 128 samples
+- fifo_threshold: Interrupt is generated whenever the number of fifo
+ entries exceeds this value
+ Valid values 0-31
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+- touchscreen-fuzz-x: horizontal noise value of the absolute input
+ device (in pixels)
+- touchscreen-fuzz-y: vertical noise value of the absolute input
+ device (in pixels)
+- touchscreen-inverted-x: X axis is inverted (boolean)
+- touchscreen-inverted-y: Y axis is inverted (boolean)
+
+Example:
+
+ touchscreen: tsc@0x180A6000 {
+ compatible = "brcm,iproc-touchscreen";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x180A6000 0x40>;
+ clocks = <&adc_clk>;
+ clock-names = "tsc_clk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+ scanning_period = <5>;
+ debounce_timeout = <40>;
+ settling_timeout = <7>;
+ touch_timeout = <10>;
+ average_data = <5>;
+ fifo_threshold = <1>;
+ /* Touchscreen is rotated 180 degrees. */
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
--- /dev/null
+* ChipOne icn8318 I2C touchscreen controller
+
+Required properties:
+ - compatible : "chipone,icn8318"
+ - reg : I2C slave address of the chip (0x40)
+ - interrupt-parent : a phandle pointing to the interrupt controller
+ serving the interrupt for this chip
+ - interrupts : interrupt specification for the icn8318 interrupt
+ - wake-gpios : GPIO specification for the WAKE input
+ - touchscreen-size-x : horizontal resolution of touchscreen (in pixels)
+ - touchscreen-size-y : vertical resolution of touchscreen (in pixels)
+
+Optional properties:
+ - pinctrl-names : should be "default"
+ - pinctrl-0: : a phandle pointing to the pin settings for the
+ control gpios
+ - touchscreen-fuzz-x : horizontal noise value of the absolute input
+ device (in pixels)
+ - touchscreen-fuzz-y : vertical noise value of the absolute input
+ device (in pixels)
+ - touchscreen-inverted-x : X axis is inverted (boolean)
+ - touchscreen-inverted-y : Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
+ Swapping is done after inverting the axis
+
+Example:
+
+i2c@00000000 {
+ /* ... */
+
+ chipone_icn8318@40 {
+ compatible = "chipone,icn8318";
+ reg = <0x40>;
+ interrupt-parent = <&pio>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_wake_pin_p66>;
+ wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-swapped-x-y;
+ };
+
+ /* ... */
+};
--- /dev/null
+Device tree bindings for Goodix GT9xx series touchscreen controller
+
+Required properties:
+
+ - compatible : Should be "goodix,gt911"
+ or "goodix,gt9110"
+ or "goodix,gt912"
+ or "goodix,gt927"
+ or "goodix,gt9271"
+ or "goodix,gt928"
+ or "goodix,gt967"
+ - reg : I2C address of the chip. Should be 0x5d or 0x14
+ - interrupt-parent : Interrupt controller to which the chip is connected
+ - interrupts : Interrupt to which the chip is connected
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ gt928@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <0 0>;
+ };
+
+ /* ... */
+ };
--------------------------------------
Required properties:
- - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts"
+ - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
+ "allwinner,sun6i-a31-ts"
- reg: mmio address range of the chip
- interrupts: interrupt to which the chip is connected
- #thermal-sensor-cells: shall be 0
Optional properties:
- - allwinner,ts-attached: boolean indicating that an actual touchscreen is
- attached to the controller
+ - allwinner,ts-attached : boolean indicating that an actual touchscreen
+ is attached to the controller
+ - allwinner,tp-sensitive-adjust : integer (4 bits)
+ adjust sensitivity of pen down detection
+ between 0 (least sensitive) and 15
+ (defaults to 15)
+ - allwinner,filter-type : integer (2 bits)
+ select median and averaging filter
+ samples used for median / averaging filter
+ 0: 4/2
+ 1: 5/3
+ 2: 8/4
+ 3: 16/8
+ (defaults to 1)
Example:
interrupts = <29>;
allwinner,ts-attached;
#thermal-sensor-cells = <0>;
+ /* sensitive/noisy touch panel */
+ allwinner,tp-sensitive-adjust = <0>;
+ allwinner,filter-type = <3>;
};
--- /dev/null
+* Semtech SX8654 I2C Touchscreen Controller
+
+Required properties:
+- compatible: must be "semtech,sx8654"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+
+Example:
+
+ sx8654@48 {
+ compatible = "semtech,sx8654";
+ reg = <0x48>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
controller)
- touchscreen-inverted-x : X axis is inverted (boolean)
- touchscreen-inverted-y : Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
+ Swapping is done after inverting the axis
Deprecated properties for Touchscreens:
- x-size : deprecated name for touchscreen-size-x
cavium Cavium, Inc.
cdns Cadence Design Systems Inc.
chipidea Chipidea, Inc
+chipone ChipOne
chipspark ChipSPARK
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
giantplus Giantplus Technology Co., Ltd.
globalscale Globalscale Technologies, Inc.
gmt Global Mixed-mode Technology, Inc.
+goodix Shenzhen Huiding Technology Co., Ltd.
google Google, Inc.
gumstix Gumstix, Inc.
gw Gateworks Corporation
S: Maintained
F: drivers/usb/chipidea/
+CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER
+M: Hans de Goede <hdegoede@redhat.com>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+F: drivers/input/touchscreen/chipone_icn8318.c
+
CHROME HARDWARE PLATFORM SUPPORT
M: Olof Johansson <olof@lixom.net>
S: Maintained
[KEY_DELETEFILE] = "DeleteFile", [KEY_XFER] = "X-fer",
[KEY_PROG1] = "Prog1", [KEY_PROG2] = "Prog2",
[KEY_WWW] = "WWW", [KEY_MSDOS] = "MSDOS",
- [KEY_COFFEE] = "Coffee", [KEY_DIRECTION] = "Direction",
+ [KEY_COFFEE] = "Coffee", [KEY_ROTATE_DISPLAY] = "RotateDisplay",
[KEY_CYCLEWINDOWS] = "CycleWindows", [KEY_MAIL] = "Mail",
[KEY_BOOKMARKS] = "Bookmarks", [KEY_COMPUTER] = "Computer",
[KEY_BACK] = "Back", [KEY_FORWARD] = "Forward",
int *slots, int num_pos)
{
struct input_mt_slot *s;
- int *w = mt->red, *p;
+ int *w = mt->red, j;
- for (p = slots; p != slots + num_pos; p++)
- *p = -1;
+ for (j = 0; j != num_pos; j++)
+ slots[j] = -1;
for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
if (!input_mt_is_active(s))
continue;
- for (p = slots; p != slots + num_pos; p++)
- if (*w++ < 0)
- *p = s - mt->slots;
+
+ for (j = 0; j != num_pos; j++) {
+ if (w[j] < 0) {
+ slots[j] = s - mt->slots;
+ break;
+ }
+ }
+
+ w += num_pos;
}
for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
if (input_mt_is_active(s))
continue;
- for (p = slots; p != slots + num_pos; p++)
- if (*p < 0) {
- *p = s - mt->slots;
+
+ for (j = 0; j != num_pos; j++) {
+ if (slots[j] < 0) {
+ slots[j] = s - mt->slots;
break;
}
+ }
}
}
To compile this driver as a module, choose M here: the
module will be called davinci_keyscan.
+config KEYBOARD_IPAQ_MICRO
+ tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+ depends on MFD_IPAQ_MICRO
+ help
+ Say Y to enable support for the buttons attached to
+ Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+ To compile this driver as a module, choose M here: the
+ module will be called ipaq-micro-keys.
+
config KEYBOARD_OMAP
tristate "TI OMAP keypad support"
depends on ARCH_OMAP1
To compile this driver as a module, choose M here: the
module will be called cap11xx.
+config KEYBOARD_BCM
+ tristate "Broadcom keypad driver"
+ depends on OF && HAVE_CLK
+ select INPUT_MATRIXKMAP
+ default ARCH_BCM_CYGNUS
+ help
+ Say Y here if you want to use Broadcom keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm-keypad.
+
endif
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
+obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o
obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o
obj-$(CONFIG_KEYBOARD_TCA8418) += tca8418_keypad.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
+obj-$(CONFIG_KEYBOARD_IPAQ_MICRO) += ipaq-micro-keys.o
obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o
obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
return 1;
}
+/*
+ * NOTE: do not add any more "force release" quirks to this table. The
+ * task of adjusting list of keys that should be "released" automatically
+ * by the driver is now delegated to userspace tools, such as udev, so
+ * submit such quirks there.
+ */
static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
{
.matches = {
--- /dev/null
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#define DEFAULT_CLK_HZ 31250
+#define MAX_ROWS 8
+#define MAX_COLS 8
+
+/* Register/field definitions */
+#define KPCR_OFFSET 0x00000080
+#define KPCR_MODE 0x00000002
+#define KPCR_MODE_SHIFT 1
+#define KPCR_MODE_MASK 1
+#define KPCR_ENABLE 0x00000001
+#define KPCR_STATUSFILTERENABLE 0x00008000
+#define KPCR_STATUSFILTERTYPE_SHIFT 12
+#define KPCR_COLFILTERENABLE 0x00000800
+#define KPCR_COLFILTERTYPE_SHIFT 8
+#define KPCR_ROWWIDTH_SHIFT 20
+#define KPCR_COLUMNWIDTH_SHIFT 16
+
+#define KPIOR_OFFSET 0x00000084
+#define KPIOR_ROWOCONTRL_SHIFT 24
+#define KPIOR_ROWOCONTRL_MASK 0xFF000000
+#define KPIOR_COLUMNOCONTRL_SHIFT 16
+#define KPIOR_COLUMNOCONTRL_MASK 0x00FF0000
+#define KPIOR_COLUMN_IO_DATA_SHIFT 0
+
+#define KPEMR0_OFFSET 0x00000090
+#define KPEMR1_OFFSET 0x00000094
+#define KPEMR2_OFFSET 0x00000098
+#define KPEMR3_OFFSET 0x0000009C
+#define KPEMR_EDGETYPE_BOTH 3
+
+#define KPSSR0_OFFSET 0x000000A0
+#define KPSSR1_OFFSET 0x000000A4
+#define KPSSRN_OFFSET(reg_n) (KPSSR0_OFFSET + 4 * (reg_n))
+#define KPIMR0_OFFSET 0x000000B0
+#define KPIMR1_OFFSET 0x000000B4
+#define KPICR0_OFFSET 0x000000B8
+#define KPICR1_OFFSET 0x000000BC
+#define KPICRN_OFFSET(reg_n) (KPICR0_OFFSET + 4 * (reg_n))
+#define KPISR0_OFFSET 0x000000C0
+#define KPISR1_OFFSET 0x000000C4
+
+#define KPCR_STATUSFILTERTYPE_MAX 7
+#define KPCR_COLFILTERTYPE_MAX 7
+
+/* Macros to determine the row/column from a bit that is set in SSR0/1. */
+#define BIT_TO_ROW_SSRN(bit_nr, reg_n) (((bit_nr) >> 3) + 4 * (reg_n))
+#define BIT_TO_COL(bit_nr) ((bit_nr) % 8)
+
+/* Structure representing various run-time entities */
+struct bcm_kp {
+ void __iomem *base;
+ int irq;
+ struct clk *clk;
+ struct input_dev *input_dev;
+ unsigned long last_state[2];
+ unsigned int n_rows;
+ unsigned int n_cols;
+ u32 kpcr;
+ u32 kpior;
+ u32 kpemr;
+ u32 imr0_val;
+ u32 imr1_val;
+};
+
+/*
+ * Returns the keycode from the input device keymap given the row and
+ * column.
+ */
+static int bcm_kp_get_keycode(struct bcm_kp *kp, int row, int col)
+{
+ unsigned int row_shift = get_count_order(kp->n_cols);
+ unsigned short *keymap = kp->input_dev->keycode;
+
+ return keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
+}
+
+static void bcm_kp_report_keys(struct bcm_kp *kp, int reg_num, int pull_mode)
+{
+ unsigned long state, change;
+ int bit_nr;
+ int key_press;
+ int row, col;
+ unsigned int keycode;
+
+ /* Clear interrupts */
+ writel(0xFFFFFFFF, kp->base + KPICRN_OFFSET(reg_num));
+
+ state = readl(kp->base + KPSSRN_OFFSET(reg_num));
+ change = kp->last_state[reg_num] ^ state;
+ kp->last_state[reg_num] = state;
+
+ for_each_set_bit(bit_nr, &change, BITS_PER_LONG) {
+ key_press = state & BIT(bit_nr);
+ /* The meaning of SSR register depends on pull mode. */
+ key_press = pull_mode ? !key_press : key_press;
+ row = BIT_TO_ROW_SSRN(bit_nr, reg_num);
+ col = BIT_TO_COL(bit_nr);
+ keycode = bcm_kp_get_keycode(kp, row, col);
+ input_report_key(kp->input_dev, keycode, key_press);
+ }
+}
+
+static irqreturn_t bcm_kp_isr_thread(int irq, void *dev_id)
+{
+ struct bcm_kp *kp = dev_id;
+ int pull_mode = (kp->kpcr >> KPCR_MODE_SHIFT) & KPCR_MODE_MASK;
+ int reg_num;
+
+ for (reg_num = 0; reg_num <= 1; reg_num++)
+ bcm_kp_report_keys(kp, reg_num, pull_mode);
+
+ input_sync(kp->input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int bcm_kp_start(struct bcm_kp *kp)
+{
+ int error;
+
+ if (kp->clk) {
+ error = clk_prepare_enable(kp->clk);
+ if (error)
+ return error;
+ }
+
+ writel(kp->kpior, kp->base + KPIOR_OFFSET);
+
+ writel(kp->imr0_val, kp->base + KPIMR0_OFFSET);
+ writel(kp->imr1_val, kp->base + KPIMR1_OFFSET);
+
+ writel(kp->kpemr, kp->base + KPEMR0_OFFSET);
+ writel(kp->kpemr, kp->base + KPEMR1_OFFSET);
+ writel(kp->kpemr, kp->base + KPEMR2_OFFSET);
+ writel(kp->kpemr, kp->base + KPEMR3_OFFSET);
+
+ writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+ writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+ kp->last_state[0] = readl(kp->base + KPSSR0_OFFSET);
+ kp->last_state[0] = readl(kp->base + KPSSR1_OFFSET);
+
+ writel(kp->kpcr | KPCR_ENABLE, kp->base + KPCR_OFFSET);
+
+ return 0;
+}
+
+static void bcm_kp_stop(const struct bcm_kp *kp)
+{
+ u32 val;
+
+ val = readl(kp->base + KPCR_OFFSET);
+ val &= ~KPCR_ENABLE;
+ writel(0, kp->base + KPCR_OFFSET);
+ writel(0, kp->base + KPIMR0_OFFSET);
+ writel(0, kp->base + KPIMR1_OFFSET);
+ writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+ writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+ if (kp->clk)
+ clk_disable_unprepare(kp->clk);
+}
+
+static int bcm_kp_open(struct input_dev *dev)
+{
+ struct bcm_kp *kp = input_get_drvdata(dev);
+
+ return bcm_kp_start(kp);
+}
+
+static void bcm_kp_close(struct input_dev *dev)
+{
+ struct bcm_kp *kp = input_get_drvdata(dev);
+
+ bcm_kp_stop(kp);
+}
+
+static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp)
+{
+ struct device *dev = kp->input_dev->dev.parent;
+ struct device_node *np = dev->of_node;
+ int error;
+ unsigned int dt_val;
+ unsigned int i;
+ unsigned int num_rows, col_mask, rows_set;
+
+ /* Initialize the KPCR Keypad Configuration Register */
+ kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE;
+
+ error = matrix_keypad_parse_of_params(dev, &kp->n_rows, &kp->n_cols);
+ if (error) {
+ dev_err(dev, "failed to parse kp params\n");
+ return error;
+ }
+
+ /* Set row width for the ASIC block. */
+ kp->kpcr |= (kp->n_rows - 1) << KPCR_ROWWIDTH_SHIFT;
+
+ /* Set column width for the ASIC block. */
+ kp->kpcr |= (kp->n_cols - 1) << KPCR_COLUMNWIDTH_SHIFT;
+
+ /* Configure the IMR registers */
+
+ /*
+ * IMR registers contain interrupt enable bits for 8x8 matrix
+ * IMR0 register format: <row3> <row2> <row1> <row0>
+ * IMR1 register format: <row7> <row6> <row5> <row4>
+ */
+ col_mask = (1 << (kp->n_cols)) - 1;
+ num_rows = kp->n_rows;
+
+ /* Set column bits in rows 0 to 3 in IMR0 */
+ kp->imr0_val = col_mask;
+
+ rows_set = 1;
+ while (--num_rows && rows_set++ < 4)
+ kp->imr0_val |= kp->imr0_val << MAX_COLS;
+
+ /* Set column bits in rows 4 to 7 in IMR1 */
+ kp->imr1_val = 0;
+ if (num_rows) {
+ kp->imr1_val = col_mask;
+ while (--num_rows)
+ kp->imr1_val |= kp->imr1_val << MAX_COLS;
+ }
+
+ /* Initialize the KPEMR Keypress Edge Mode Registers */
+ /* Trigger on both edges */
+ kp->kpemr = 0;
+ for (i = 0; i <= 30; i += 2)
+ kp->kpemr |= (KPEMR_EDGETYPE_BOTH << i);
+
+ /*
+ * Obtain the Status filter debounce value and verify against the
+ * possible values specified in the DT binding.
+ */
+ of_property_read_u32(np, "status-debounce-filter-period", &dt_val);
+
+ if (dt_val > KPCR_STATUSFILTERTYPE_MAX) {
+ dev_err(dev, "Invalid Status filter debounce value %d\n",
+ dt_val);
+ return -EINVAL;
+ }
+
+ kp->kpcr |= dt_val << KPCR_STATUSFILTERTYPE_SHIFT;
+
+ /*
+ * Obtain the Column filter debounce value and verify against the
+ * possible values specified in the DT binding.
+ */
+ of_property_read_u32(np, "col-debounce-filter-period", &dt_val);
+
+ if (dt_val > KPCR_COLFILTERTYPE_MAX) {
+ dev_err(dev, "Invalid Column filter debounce value %d\n",
+ dt_val);
+ return -EINVAL;
+ }
+
+ kp->kpcr |= dt_val << KPCR_COLFILTERTYPE_SHIFT;
+
+ /*
+ * Determine between the row and column,
+ * which should be configured as output.
+ */
+ if (of_property_read_bool(np, "row-output-enabled")) {
+ /*
+ * Set RowOContrl or ColumnOContrl in KPIOR
+ * to the number of pins to drive as outputs
+ */
+ kp->kpior = ((1 << kp->n_rows) - 1) <<
+ KPIOR_ROWOCONTRL_SHIFT;
+ } else {
+ kp->kpior = ((1 << kp->n_cols) - 1) <<
+ KPIOR_COLUMNOCONTRL_SHIFT;
+ }
+
+ /*
+ * Determine if the scan pull up needs to be enabled
+ */
+ if (of_property_read_bool(np, "pull-up-enabled"))
+ kp->kpcr |= KPCR_MODE;
+
+ dev_dbg(dev, "n_rows=%d n_col=%d kpcr=%x kpior=%x kpemr=%x\n",
+ kp->n_rows, kp->n_cols,
+ kp->kpcr, kp->kpior, kp->kpemr);
+
+ return 0;
+}
+
+
+static int bcm_kp_probe(struct platform_device *pdev)
+{
+ struct bcm_kp *kp;
+ struct input_dev *input_dev;
+ struct resource *res;
+ int error;
+
+ kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+ if (!kp)
+ return -ENOMEM;
+
+ input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!input_dev) {
+ dev_err(&pdev->dev, "failed to allocate the input device\n");
+ return -ENOMEM;
+ }
+
+ __set_bit(EV_KEY, input_dev->evbit);
+
+ /* Enable auto repeat feature of Linux input subsystem */
+ if (of_property_read_bool(pdev->dev.of_node, "autorepeat"))
+ __set_bit(EV_REP, input_dev->evbit);
+
+ input_dev->name = pdev->name;
+ input_dev->phys = "keypad/input0";
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->open = bcm_kp_open;
+ input_dev->close = bcm_kp_close;
+
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+
+ input_set_drvdata(input_dev, kp);
+
+ kp->input_dev = input_dev;
+
+ platform_set_drvdata(pdev, kp);
+
+ error = bcm_kp_matrix_key_parse_dt(kp);
+ if (error)
+ return error;
+
+ error = matrix_keypad_build_keymap(NULL, NULL,
+ kp->n_rows, kp->n_cols,
+ NULL, input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ return error;
+ }
+
+ /* Get the KEYPAD base address */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing keypad base address resource\n");
+ return -ENODEV;
+ }
+
+ kp->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(kp->base))
+ return PTR_ERR(kp->base);
+
+ /* Enable clock */
+ kp->clk = devm_clk_get(&pdev->dev, "peri_clk");
+ if (IS_ERR(kp->clk)) {
+ error = PTR_ERR(kp->clk);
+ if (error != -ENOENT) {
+ if (error != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to get clock\n");
+ return error;
+ }
+ dev_dbg(&pdev->dev,
+ "No clock specified. Assuming it's enabled\n");
+ kp->clk = NULL;
+ } else {
+ unsigned int desired_rate;
+ long actual_rate;
+
+ error = of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &desired_rate);
+ if (error < 0)
+ desired_rate = DEFAULT_CLK_HZ;
+
+ actual_rate = clk_round_rate(kp->clk, desired_rate);
+ if (actual_rate <= 0)
+ return -EINVAL;
+
+ error = clk_set_rate(kp->clk, actual_rate);
+ if (error)
+ return error;
+
+ error = clk_prepare_enable(kp->clk);
+ if (error)
+ return error;
+ }
+
+ /* Put the kp into a known sane state */
+ bcm_kp_stop(kp);
+
+ kp->irq = platform_get_irq(pdev, 0);
+ if (kp->irq < 0) {
+ dev_err(&pdev->dev, "no IRQ specified\n");
+ return -EINVAL;
+ }
+
+ error = devm_request_threaded_irq(&pdev->dev, kp->irq,
+ NULL, bcm_kp_isr_thread,
+ IRQF_ONESHOT, pdev->name, kp);
+ if (error) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id bcm_kp_of_match[] = {
+ { .compatible = "brcm,bcm-keypad" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bcm_kp_of_match);
+
+static struct platform_driver bcm_kp_device_driver = {
+ .probe = bcm_kp_probe,
+ .driver = {
+ .name = "bcm-keypad",
+ .of_match_table = of_match_ptr(bcm_kp_of_match),
+ }
+};
+
+module_platform_driver(bcm_kp_device_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("BCM Keypad Driver");
+MODULE_LICENSE("GPL v2");
* wake source (e.g. the lid is open and the user might press a key to
* wake) then the key scan buffer should be preserved.
*/
- if (ckdev->ec->was_wake_device)
+ if (!ckdev->ec->was_wake_device)
cros_ec_keyb_clear_keyboard(ckdev);
return 0;
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, key subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct ipaq_micro_keys {
+ struct ipaq_micro *micro;
+ struct input_dev *input;
+ u16 *codes;
+};
+
+static const u16 micro_keycodes[] = {
+ KEY_RECORD, /* 1: Record button */
+ KEY_CALENDAR, /* 2: Calendar */
+ KEY_ADDRESSBOOK, /* 3: Contacts (looks like Outlook) */
+ KEY_MAIL, /* 4: Envelope (Q on older iPAQs) */
+ KEY_HOMEPAGE, /* 5: Start (looks like swoopy arrow) */
+ KEY_UP, /* 6: Up */
+ KEY_RIGHT, /* 7: Right */
+ KEY_LEFT, /* 8: Left */
+ KEY_DOWN, /* 9: Down */
+};
+
+static void micro_key_receive(void *data, int len, unsigned char *msg)
+{
+ struct ipaq_micro_keys *keys = data;
+ int key, down;
+
+ down = 0x80 & msg[0];
+ key = 0x7f & msg[0];
+
+ if (key < ARRAY_SIZE(micro_keycodes)) {
+ input_report_key(keys->input, keys->codes[key], down);
+ input_sync(keys->input);
+ }
+}
+
+static void micro_key_start(struct ipaq_micro_keys *keys)
+{
+ spin_lock(&keys->micro->lock);
+ keys->micro->key = micro_key_receive;
+ keys->micro->key_data = keys;
+ spin_unlock(&keys->micro->lock);
+}
+
+static void micro_key_stop(struct ipaq_micro_keys *keys)
+{
+ spin_lock(&keys->micro->lock);
+ keys->micro->key = NULL;
+ keys->micro->key_data = NULL;
+ spin_unlock(&keys->micro->lock);
+}
+
+static int micro_key_open(struct input_dev *input)
+{
+ struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+ micro_key_start(keys);
+
+ return 0;
+}
+
+static void micro_key_close(struct input_dev *input)
+{
+ struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+ micro_key_stop(keys);
+}
+
+static int micro_key_probe(struct platform_device *pdev)
+{
+ struct ipaq_micro_keys *keys;
+ int error;
+ int i;
+
+ keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+ if (!keys)
+ return -ENOMEM;
+
+ keys->micro = dev_get_drvdata(pdev->dev.parent);
+
+ keys->input = devm_input_allocate_device(&pdev->dev);
+ if (!keys->input)
+ return -ENOMEM;
+
+ keys->input->keycodesize = sizeof(micro_keycodes[0]);
+ keys->input->keycodemax = ARRAY_SIZE(micro_keycodes);
+ keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes,
+ keys->input->keycodesize * keys->input->keycodemax,
+ GFP_KERNEL);
+ keys->input->keycode = keys->codes;
+
+ __set_bit(EV_KEY, keys->input->evbit);
+ for (i = 0; i < ARRAY_SIZE(micro_keycodes); i++)
+ __set_bit(micro_keycodes[i], keys->input->keybit);
+
+ keys->input->name = "h3600 micro keys";
+ keys->input->open = micro_key_open;
+ keys->input->close = micro_key_close;
+ input_set_drvdata(keys->input, keys);
+
+ error = input_register_device(keys->input);
+ if (error)
+ return error;
+
+ platform_set_drvdata(pdev, keys);
+ return 0;
+}
+
+static int __maybe_unused micro_key_suspend(struct device *dev)
+{
+ struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+
+ micro_key_stop(keys);
+
+ return 0;
+}
+
+static int __maybe_unused micro_key_resume(struct device *dev)
+{
+ struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+ struct input_dev *input = keys->input;
+
+ mutex_lock(&input->mutex);
+
+ if (input->users)
+ micro_key_start(keys);
+
+ mutex_unlock(&input->mutex);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(micro_key_dev_pm_ops,
+ micro_key_suspend, micro_key_resume);
+
+static struct platform_driver micro_key_device_driver = {
+ .driver = {
+ .name = "ipaq-micro-keys",
+ .pm = µ_key_dev_pm_ops,
+ },
+ .probe = micro_key_probe,
+};
+module_platform_driver(micro_key_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys");
+MODULE_ALIAS("platform:ipaq-micro-keys");
#define TC3589x_EVT_INT_CLR 0x2
#define TC3589x_KBD_INT_CLR 0x1
+/**
+ * struct tc35893_keypad_platform_data - platform specific keypad data
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow: mask for available rows, value is 0xFF
+ * @kcol: mask for available columns, value is 0xFF
+ * @debounce_period: platform specific debounce time
+ * @settle_time: platform specific settle down time
+ * @irqtype: type of interrupt, falling or rising edge
+ * @enable_wakeup: specifies if keypad event can wake up system from sleep
+ * @no_autorepeat: flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+ u8 krow;
+ u8 kcol;
+ u8 debounce_period;
+ u8 settle_time;
+ unsigned long irqtype;
+ bool enable_wakeup;
+ bool no_autorepeat;
+};
+
/**
* struct tc_keypad - data structure used by keypad driver
* @tc3589x: pointer to tc35893
const struct tc3589x_keypad_platform_data *plat;
int error, irq;
- plat = tc3589x->pdata->keypad;
- if (!plat) {
- plat = tc3589x_keypad_of_probe(&pdev->dev);
- if (IS_ERR(plat)) {
- dev_err(&pdev->dev, "invalid keypad platform data\n");
- return PTR_ERR(plat);
- }
+ plat = tc3589x_keypad_of_probe(&pdev->dev);
+ if (IS_ERR(plat)) {
+ dev_err(&pdev->dev, "invalid keypad platform data\n");
+ return PTR_ERR(plat);
}
irq = platform_get_irq(pdev, 0);
To compile this driver as a module, choose M here: the
module will be called pcspkr.
+config INPUT_PM8941_PWRKEY
+ tristate "Qualcomm PM8941 power key support"
+ depends on MFD_SPMI_PMIC
+ help
+ Say Y here if you want support for the power key usually found
+ on boards using a Qualcomm PM8941 compatible PMIC.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pm8941-pwrkey.
+
config INPUT_PM8XXX_VIBRATOR
tristate "Qualcomm PM8XXX vibrator support"
depends on MFD_PM8XXX
To compile this driver as module, choose M here: the
module will be called max77693-haptic.
+config INPUT_MAX77843_HAPTIC
+ tristate "MAXIM MAX77843 haptic controller support"
+ depends on MFD_MAX77843 && REGULATOR
+ select INPUT_FF_MEMLESS
+ help
+ This option enables support for the haptic controller on
+ MAXIM MAX77843 chip. The driver supports ff-memless interface
+ from input framework.
+
+ To compile this driver as module, choose M here: the
+ module will be called max77843-haptic.
+
config INPUT_MAX8925_ONKEY
tristate "MAX8925 ONKEY support"
depends on MFD_MAX8925
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o
+obj-$(CONFIG_INPUT_MAX77843_HAPTIC) += max77843-haptic.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
+obj-$(CONFIG_INPUT_PM8941_PWRKEY) += pm8941-pwrkey.o
obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o
obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
--- /dev/null
+/*
+ * MAXIM MAX77693 Haptic device driver
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define MAX_MAGNITUDE_SHIFT 16
+
+enum max77843_haptic_motor_type {
+ MAX77843_HAPTIC_ERM = 0,
+ MAX77843_HAPTIC_LRA,
+};
+
+enum max77843_haptic_pwm_divisor {
+ MAX77843_HAPTIC_PWM_DIVISOR_32 = 0,
+ MAX77843_HAPTIC_PWM_DIVISOR_64,
+ MAX77843_HAPTIC_PWM_DIVISOR_128,
+ MAX77843_HAPTIC_PWM_DIVISOR_256,
+};
+
+struct max77843_haptic {
+ struct regmap *regmap_haptic;
+ struct device *dev;
+ struct input_dev *input_dev;
+ struct pwm_device *pwm_dev;
+ struct regulator *motor_reg;
+ struct work_struct work;
+ struct mutex mutex;
+
+ unsigned int magnitude;
+ unsigned int pwm_duty;
+
+ bool active;
+ bool suspended;
+
+ enum max77843_haptic_motor_type type;
+ enum max77843_haptic_pwm_divisor pwm_divisor;
+};
+
+static int max77843_haptic_set_duty_cycle(struct max77843_haptic *haptic)
+{
+ int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
+ int error;
+
+ error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
+ if (error) {
+ dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int max77843_haptic_bias(struct max77843_haptic *haptic, bool on)
+{
+ int error;
+
+ error = regmap_update_bits(haptic->regmap_haptic,
+ MAX77843_SYS_REG_MAINCTRL1,
+ MAX77843_MAINCTRL1_BIASEN_MASK,
+ on << MAINCTRL1_BIASEN_SHIFT);
+ if (error) {
+ dev_err(haptic->dev, "failed to %s bias: %d\n",
+ on ? "enable" : "disable", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int max77843_haptic_config(struct max77843_haptic *haptic, bool enable)
+{
+ unsigned int value;
+ int error;
+
+ value = (haptic->type << MCONFIG_MODE_SHIFT) |
+ (enable << MCONFIG_MEN_SHIFT) |
+ (haptic->pwm_divisor << MCONFIG_PDIV_SHIFT);
+
+ error = regmap_write(haptic->regmap_haptic,
+ MAX77843_HAP_REG_MCONFIG, value);
+ if (error) {
+ dev_err(haptic->dev,
+ "failed to update haptic config: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int max77843_haptic_enable(struct max77843_haptic *haptic)
+{
+ int error;
+
+ if (haptic->active)
+ return 0;
+
+ error = pwm_enable(haptic->pwm_dev);
+ if (error) {
+ dev_err(haptic->dev,
+ "failed to enable pwm device: %d\n", error);
+ return error;
+ }
+
+ error = max77843_haptic_config(haptic, true);
+ if (error)
+ goto err_config;
+
+ haptic->active = true;
+
+ return 0;
+
+err_config:
+ pwm_disable(haptic->pwm_dev);
+
+ return error;
+}
+
+static int max77843_haptic_disable(struct max77843_haptic *haptic)
+{
+ int error;
+
+ if (!haptic->active)
+ return 0;
+
+ error = max77843_haptic_config(haptic, false);
+ if (error)
+ return error;
+
+ pwm_disable(haptic->pwm_dev);
+
+ haptic->active = false;
+
+ return 0;
+}
+
+static void max77843_haptic_play_work(struct work_struct *work)
+{
+ struct max77843_haptic *haptic =
+ container_of(work, struct max77843_haptic, work);
+ int error;
+
+ mutex_lock(&haptic->mutex);
+
+ if (haptic->suspended)
+ goto out_unlock;
+
+ if (haptic->magnitude) {
+ error = max77843_haptic_set_duty_cycle(haptic);
+ if (error) {
+ dev_err(haptic->dev,
+ "failed to set duty cycle: %d\n", error);
+ goto out_unlock;
+ }
+
+ error = max77843_haptic_enable(haptic);
+ if (error)
+ dev_err(haptic->dev,
+ "cannot enable haptic: %d\n", error);
+ } else {
+ error = max77843_haptic_disable(haptic);
+ if (error)
+ dev_err(haptic->dev,
+ "cannot disable haptic: %d\n", error);
+ }
+
+out_unlock:
+ mutex_unlock(&haptic->mutex);
+}
+
+static int max77843_haptic_play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct max77843_haptic *haptic = input_get_drvdata(dev);
+ u64 period_mag_multi;
+
+ haptic->magnitude = effect->u.rumble.strong_magnitude;
+ if (!haptic->magnitude)
+ haptic->magnitude = effect->u.rumble.weak_magnitude;
+
+ period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
+ haptic->pwm_duty = (unsigned int)(period_mag_multi >>
+ MAX_MAGNITUDE_SHIFT);
+
+ schedule_work(&haptic->work);
+
+ return 0;
+}
+
+static int max77843_haptic_open(struct input_dev *dev)
+{
+ struct max77843_haptic *haptic = input_get_drvdata(dev);
+ int error;
+
+ error = max77843_haptic_bias(haptic, true);
+ if (error)
+ return error;
+
+ error = regulator_enable(haptic->motor_reg);
+ if (error) {
+ dev_err(haptic->dev,
+ "failed to enable regulator: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static void max77843_haptic_close(struct input_dev *dev)
+{
+ struct max77843_haptic *haptic = input_get_drvdata(dev);
+ int error;
+
+ cancel_work_sync(&haptic->work);
+ max77843_haptic_disable(haptic);
+
+ error = regulator_disable(haptic->motor_reg);
+ if (error)
+ dev_err(haptic->dev,
+ "failed to disable regulator: %d\n", error);
+
+ max77843_haptic_bias(haptic, false);
+}
+
+static int max77843_haptic_probe(struct platform_device *pdev)
+{
+ struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+ struct max77843_haptic *haptic;
+ int error;
+
+ haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
+ if (!haptic)
+ return -ENOMEM;
+
+ haptic->regmap_haptic = max77843->regmap;
+ haptic->dev = &pdev->dev;
+ haptic->type = MAX77843_HAPTIC_LRA;
+ haptic->pwm_divisor = MAX77843_HAPTIC_PWM_DIVISOR_128;
+
+ INIT_WORK(&haptic->work, max77843_haptic_play_work);
+ mutex_init(&haptic->mutex);
+
+ haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL);
+ if (IS_ERR(haptic->pwm_dev)) {
+ dev_err(&pdev->dev, "failed to get pwm device\n");
+ return PTR_ERR(haptic->pwm_dev);
+ }
+
+ haptic->motor_reg = devm_regulator_get_exclusive(&pdev->dev, "haptic");
+ if (IS_ERR(haptic->motor_reg)) {
+ dev_err(&pdev->dev, "failed to get regulator\n");
+ return PTR_ERR(haptic->motor_reg);
+ }
+
+ haptic->input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!haptic->input_dev) {
+ dev_err(&pdev->dev, "failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ haptic->input_dev->name = "max77843-haptic";
+ haptic->input_dev->id.version = 1;
+ haptic->input_dev->dev.parent = &pdev->dev;
+ haptic->input_dev->open = max77843_haptic_open;
+ haptic->input_dev->close = max77843_haptic_close;
+ input_set_drvdata(haptic->input_dev, haptic);
+ input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
+
+ error = input_ff_create_memless(haptic->input_dev, NULL,
+ max77843_haptic_play_effect);
+ if (error) {
+ dev_err(&pdev->dev, "failed to create force-feedback\n");
+ return error;
+ }
+
+ error = input_register_device(haptic->input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ return error;
+ }
+
+ platform_set_drvdata(pdev, haptic);
+
+ return 0;
+}
+
+static int __maybe_unused max77843_haptic_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct max77843_haptic *haptic = platform_get_drvdata(pdev);
+ int error;
+
+ error = mutex_lock_interruptible(&haptic->mutex);
+ if (error)
+ return error;
+
+ max77843_haptic_disable(haptic);
+
+ haptic->suspended = true;
+
+ mutex_unlock(&haptic->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused max77843_haptic_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct max77843_haptic *haptic = platform_get_drvdata(pdev);
+ unsigned int magnitude;
+
+ mutex_lock(&haptic->mutex);
+
+ haptic->suspended = false;
+
+ magnitude = ACCESS_ONCE(haptic->magnitude);
+ if (magnitude)
+ max77843_haptic_enable(haptic);
+
+ mutex_unlock(&haptic->mutex);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max77843_haptic_pm_ops,
+ max77843_haptic_suspend, max77843_haptic_resume);
+
+static struct platform_driver max77843_haptic_driver = {
+ .driver = {
+ .name = "max77843-haptic",
+ .pm = &max77843_haptic_pm_ops,
+ },
+ .probe = max77843_haptic_probe,
+};
+module_platform_driver(max77843_haptic_driver);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_DESCRIPTION("MAXIM MAX77843 Haptic driver");
+MODULE_LICENSE("GPL");
struct mma8450 *m;
int err;
- m = kzalloc(sizeof(struct mma8450), GFP_KERNEL);
- idev = input_allocate_polled_device();
- if (!m || !idev) {
- err = -ENOMEM;
- goto err_free_mem;
- }
+ m = devm_kzalloc(&c->dev, sizeof(*m), GFP_KERNEL);
+ if (!m)
+ return -ENOMEM;
+
+ idev = devm_input_allocate_polled_device(&c->dev);
+ if (!idev)
+ return -ENOMEM;
m->client = c;
m->idev = idev;
idev->private = m;
idev->input->name = MMA8450_DRV_NAME;
idev->input->id.bustype = BUS_I2C;
- idev->input->dev.parent = &c->dev;
idev->poll = mma8450_poll;
idev->poll_interval = POLL_INTERVAL;
idev->poll_interval_max = POLL_INTERVAL_MAX;
err = input_register_polled_device(idev);
if (err) {
dev_err(&c->dev, "failed to register polled input device\n");
- goto err_free_mem;
+ return err;
}
i2c_set_clientdata(c, m);
- return 0;
-
-err_free_mem:
- input_free_polled_device(idev);
- kfree(m);
- return err;
-}
-
-static int mma8450_remove(struct i2c_client *c)
-{
- struct mma8450 *m = i2c_get_clientdata(c);
- struct input_polled_dev *idev = m->idev;
-
- input_unregister_polled_device(idev);
- input_free_polled_device(idev);
- kfree(m);
-
return 0;
}
static struct i2c_driver mma8450_driver = {
.driver = {
.name = MMA8450_DRV_NAME,
- .owner = THIS_MODULE,
.of_match_table = mma8450_dt_ids,
},
.probe = mma8450_probe,
- .remove = mma8450_remove,
.id_table = mma8450_id,
};
palmas_pwron_suspend, palmas_pwron_resume);
#ifdef CONFIG_OF
-static struct of_device_id of_palmas_pwr_match[] = {
+static const struct of_device_id of_palmas_pwr_match[] = {
{ .compatible = "ti,palmas-pwrbutton" },
{ },
};
--- /dev/null
+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#define PON_REV2 0x01
+
+#define PON_RT_STS 0x10
+#define PON_KPDPWR_N_SET BIT(0)
+
+#define PON_PS_HOLD_RST_CTL 0x5a
+#define PON_PS_HOLD_RST_CTL2 0x5b
+#define PON_PS_HOLD_ENABLE BIT(7)
+#define PON_PS_HOLD_TYPE_MASK 0x0f
+#define PON_PS_HOLD_TYPE_SHUTDOWN 4
+#define PON_PS_HOLD_TYPE_HARD_RESET 7
+
+#define PON_PULL_CTL 0x70
+#define PON_KPDPWR_PULL_UP BIT(1)
+
+#define PON_DBC_CTL 0x71
+#define PON_DBC_DELAY_MASK 0x7
+
+
+struct pm8941_pwrkey {
+ struct device *dev;
+ int irq;
+ u32 baseaddr;
+ struct regmap *regmap;
+ struct input_dev *input;
+
+ unsigned int revision;
+ struct notifier_block reboot_notifier;
+};
+
+static int pm8941_reboot_notify(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
+ reboot_notifier);
+ unsigned int enable_reg;
+ unsigned int reset_type;
+ int error;
+
+ /* PMICs with revision 0 have the enable bit in same register as ctrl */
+ if (pwrkey->revision == 0)
+ enable_reg = PON_PS_HOLD_RST_CTL;
+ else
+ enable_reg = PON_PS_HOLD_RST_CTL2;
+
+ error = regmap_update_bits(pwrkey->regmap,
+ pwrkey->baseaddr + enable_reg,
+ PON_PS_HOLD_ENABLE,
+ 0);
+ if (error)
+ dev_err(pwrkey->dev,
+ "unable to clear ps hold reset enable: %d\n",
+ error);
+
+ /*
+ * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
+ * writes.
+ */
+ usleep_range(100, 1000);
+
+ switch (code) {
+ case SYS_HALT:
+ case SYS_POWER_OFF:
+ reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
+ break;
+ case SYS_RESTART:
+ default:
+ reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
+ break;
+ };
+
+ error = regmap_update_bits(pwrkey->regmap,
+ pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
+ PON_PS_HOLD_TYPE_MASK,
+ reset_type);
+ if (error)
+ dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
+ error);
+
+ error = regmap_update_bits(pwrkey->regmap,
+ pwrkey->baseaddr + enable_reg,
+ PON_PS_HOLD_ENABLE,
+ PON_PS_HOLD_ENABLE);
+ if (error)
+ dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
+
+ return NOTIFY_DONE;
+}
+
+static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
+{
+ struct pm8941_pwrkey *pwrkey = _data;
+ unsigned int sts;
+ int error;
+
+ error = regmap_read(pwrkey->regmap,
+ pwrkey->baseaddr + PON_RT_STS, &sts);
+ if (error)
+ return IRQ_HANDLED;
+
+ input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET));
+ input_sync(pwrkey->input);
+
+ return IRQ_HANDLED;
+}
+
+static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
+{
+ struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(pwrkey->irq);
+
+ return 0;
+}
+
+static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
+{
+ struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(pwrkey->irq);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
+ pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
+
+static int pm8941_pwrkey_probe(struct platform_device *pdev)
+{
+ struct pm8941_pwrkey *pwrkey;
+ bool pull_up;
+ u32 req_delay;
+ int error;
+
+ if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
+ req_delay = 15625;
+
+ if (req_delay > 2000000 || req_delay == 0) {
+ dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
+ return -EINVAL;
+ }
+
+ pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
+
+ pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
+ if (!pwrkey)
+ return -ENOMEM;
+
+ pwrkey->dev = &pdev->dev;
+
+ pwrkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!pwrkey->regmap) {
+ dev_err(&pdev->dev, "failed to locate regmap\n");
+ return -ENODEV;
+ }
+
+ pwrkey->irq = platform_get_irq(pdev, 0);
+ if (pwrkey->irq < 0) {
+ dev_err(&pdev->dev, "failed to get irq\n");
+ return pwrkey->irq;
+ }
+
+ error = of_property_read_u32(pdev->dev.of_node, "reg",
+ &pwrkey->baseaddr);
+ if (error)
+ return error;
+
+ error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
+ &pwrkey->revision);
+ if (error) {
+ dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
+ return error;
+ }
+
+ pwrkey->input = devm_input_allocate_device(&pdev->dev);
+ if (!pwrkey->input) {
+ dev_dbg(&pdev->dev, "unable to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ input_set_capability(pwrkey->input, EV_KEY, KEY_POWER);
+
+ pwrkey->input->name = "pm8941_pwrkey";
+ pwrkey->input->phys = "pm8941_pwrkey/input0";
+
+ req_delay = (req_delay << 6) / USEC_PER_SEC;
+ req_delay = ilog2(req_delay);
+
+ error = regmap_update_bits(pwrkey->regmap,
+ pwrkey->baseaddr + PON_DBC_CTL,
+ PON_DBC_DELAY_MASK,
+ req_delay);
+ if (error) {
+ dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
+ return error;
+ }
+
+ error = regmap_update_bits(pwrkey->regmap,
+ pwrkey->baseaddr + PON_PULL_CTL,
+ PON_KPDPWR_PULL_UP,
+ pull_up ? PON_KPDPWR_PULL_UP : 0);
+ if (error) {
+ dev_err(&pdev->dev, "failed to set pull: %d\n", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
+ NULL, pm8941_pwrkey_irq,
+ IRQF_ONESHOT,
+ "pm8941_pwrkey", pwrkey);
+ if (error) {
+ dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(pwrkey->input);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device: %d\n",
+ error);
+ return error;
+ }
+
+ pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
+ error = register_reboot_notifier(&pwrkey->reboot_notifier);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
+ error);
+ return error;
+ }
+
+ platform_set_drvdata(pdev, pwrkey);
+ device_init_wakeup(&pdev->dev, 1);
+
+ return 0;
+}
+
+static int pm8941_pwrkey_remove(struct platform_device *pdev)
+{
+ struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
+
+ device_init_wakeup(&pdev->dev, 0);
+ unregister_reboot_notifier(&pwrkey->reboot_notifier);
+
+ return 0;
+}
+
+static const struct of_device_id pm8941_pwr_key_id_table[] = {
+ { .compatible = "qcom,pm8941-pwrkey" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
+
+static struct platform_driver pm8941_pwrkey_driver = {
+ .probe = pm8941_pwrkey_probe,
+ .remove = pm8941_pwrkey_remove,
+ .driver = {
+ .name = "pm8941-pwrkey",
+ .pm = &pm8941_pwr_key_pm_ops,
+ .of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
+ },
+};
+module_platform_driver(pm8941_pwrkey_driver);
+
+MODULE_DESCRIPTION("PM8941 Power Key driver");
+MODULE_LICENSE("GPL v2");
}
if (value == 0) {
- pwm_config(beeper->pwm, 0, 0);
pwm_disable(beeper->pwm);
} else {
period = HZ_TO_NANOSECONDS(value);
static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
pwm_beeper_suspend, pwm_beeper_resume);
-#ifdef CONFIG_PM_SLEEP
-#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
-#else
-#define PWM_BEEPER_PM_OPS NULL
-#endif
-
#ifdef CONFIG_OF
static const struct of_device_id pwm_beeper_match[] = {
{ .compatible = "pwm-beeper", },
.remove = pwm_beeper_remove,
.driver = {
.name = "pwm-beeper",
- .pm = PWM_BEEPER_PM_OPS,
+ .pm = &pwm_beeper_pm_ops,
.of_match_table = of_match_ptr(pwm_beeper_match),
},
};
static SIMPLE_DEV_PM_OPS(regulator_haptic_pm_ops,
regulator_haptic_suspend, regulator_haptic_resume);
-static struct of_device_id regulator_haptic_dt_match[] = {
+static const struct of_device_id regulator_haptic_dt_match[] = {
{ .compatible = "regulator-haptic" },
{ /* sentinel */ },
};
return 0;
}
-static struct of_device_id of_tps65218_pwr_match[] = {
+static const struct of_device_id of_tps65218_pwr_match[] = {
{ .compatible = "ti,tps65218-pwrbutton" },
{ },
};
ALPS_PROTO_V7, 0x48, 0x48, ALPS_DUALPOINT
};
+static const struct alps_protocol_info alps_v8_protocol_data = {
+ ALPS_PROTO_V8, 0x18, 0x18, 0
+};
+
static void alps_set_abs_params_st(struct alps_data *priv,
struct input_dev *dev1);
static void alps_set_abs_params_mt(struct alps_data *priv,
struct input_dev *dev1);
+static void alps_set_abs_params_v7(struct alps_data *priv,
+ struct input_dev *dev1);
+static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
+ struct input_dev *dev1);
/* Packet formats are described in Documentation/input/alps.txt */
return;
}
+ /* Non interleaved V2 dualpoint has separate stick button bits */
+ if (priv->proto_version == ALPS_PROTO_V2 &&
+ priv->flags == (ALPS_PASS | ALPS_DUALPOINT)) {
+ left |= packet[0] & 1;
+ right |= packet[0] & 2;
+ middle |= packet[0] & 4;
+ }
+
alps_report_buttons(dev, dev2, left, right, middle);
/* Convert hardware tap to a reasonable Z value */
alps_process_touchpad_packet_v7(psmouse);
}
+static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte)
+{
+ unsigned char pkt_id = SS4_PACKET_ID_IDLE;
+
+ if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
+ (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) {
+ pkt_id = SS4_PACKET_ID_IDLE;
+ } else if (!(byte[3] & 0x10)) {
+ pkt_id = SS4_PACKET_ID_ONE;
+ } else if (!(byte[3] & 0x20)) {
+ pkt_id = SS4_PACKET_ID_TWO;
+ } else {
+ pkt_id = SS4_PACKET_ID_MULTI;
+ }
+
+ return pkt_id;
+}
+
+static int alps_decode_ss4_v2(struct alps_fields *f,
+ unsigned char *p, struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ unsigned char pkt_id;
+ unsigned int no_data_x, no_data_y;
+
+ pkt_id = alps_get_pkt_id_ss4_v2(p);
+
+ /* Current packet is 1Finger coordinate packet */
+ switch (pkt_id) {
+ case SS4_PACKET_ID_ONE:
+ f->mt[0].x = SS4_1F_X_V2(p);
+ f->mt[0].y = SS4_1F_Y_V2(p);
+ f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f;
+ f->fingers = 1;
+ f->first_mp = 0;
+ f->is_mp = 0;
+ break;
+
+ case SS4_PACKET_ID_TWO:
+ if (priv->flags & ALPS_BUTTONPAD) {
+ f->mt[0].x = SS4_BTL_MF_X_V2(p, 0);
+ f->mt[0].y = SS4_BTL_MF_Y_V2(p, 0);
+ f->mt[1].x = SS4_BTL_MF_X_V2(p, 1);
+ f->mt[1].y = SS4_BTL_MF_Y_V2(p, 1);
+ } else {
+ f->mt[0].x = SS4_STD_MF_X_V2(p, 0);
+ f->mt[0].y = SS4_STD_MF_Y_V2(p, 0);
+ f->mt[1].x = SS4_STD_MF_X_V2(p, 1);
+ f->mt[1].y = SS4_STD_MF_Y_V2(p, 1);
+ }
+ f->pressure = SS4_MF_Z_V2(p, 0) ? 0x30 : 0;
+
+ if (SS4_IS_MF_CONTINUE(p)) {
+ f->first_mp = 1;
+ } else {
+ f->fingers = 2;
+ f->first_mp = 0;
+ }
+ f->is_mp = 0;
+
+ break;
+
+ case SS4_PACKET_ID_MULTI:
+ if (priv->flags & ALPS_BUTTONPAD) {
+ f->mt[2].x = SS4_BTL_MF_X_V2(p, 0);
+ f->mt[2].y = SS4_BTL_MF_Y_V2(p, 0);
+ f->mt[3].x = SS4_BTL_MF_X_V2(p, 1);
+ f->mt[3].y = SS4_BTL_MF_Y_V2(p, 1);
+ no_data_x = SS4_MFPACKET_NO_AX_BL;
+ no_data_y = SS4_MFPACKET_NO_AY_BL;
+ } else {
+ f->mt[2].x = SS4_STD_MF_X_V2(p, 0);
+ f->mt[2].y = SS4_STD_MF_Y_V2(p, 0);
+ f->mt[3].x = SS4_STD_MF_X_V2(p, 1);
+ f->mt[3].y = SS4_STD_MF_Y_V2(p, 1);
+ no_data_x = SS4_MFPACKET_NO_AX;
+ no_data_y = SS4_MFPACKET_NO_AY;
+ }
+
+ f->first_mp = 0;
+ f->is_mp = 1;
+
+ if (SS4_IS_5F_DETECTED(p)) {
+ f->fingers = 5;
+ } else if (f->mt[3].x == no_data_x &&
+ f->mt[3].y == no_data_y) {
+ f->mt[3].x = 0;
+ f->mt[3].y = 0;
+ f->fingers = 3;
+ } else {
+ f->fingers = 4;
+ }
+ break;
+
+ case SS4_PACKET_ID_IDLE:
+ default:
+ memset(f, 0, sizeof(struct alps_fields));
+ break;
+ }
+
+ f->left = !!(SS4_BTN_V2(p) & 0x01);
+ if (!(priv->flags & ALPS_BUTTONPAD)) {
+ f->right = !!(SS4_BTN_V2(p) & 0x02);
+ f->middle = !!(SS4_BTN_V2(p) & 0x04);
+ }
+
+ return 0;
+}
+
+static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ struct input_dev *dev = psmouse->dev;
+ struct alps_fields *f = &priv->f;
+
+ memset(f, 0, sizeof(struct alps_fields));
+ priv->decode_fields(f, packet, psmouse);
+ if (priv->multi_packet) {
+ /*
+ * Sometimes the first packet will indicate a multi-packet
+ * sequence, but sometimes the next multi-packet would not
+ * come. Check for this, and when it happens process the
+ * position packet as usual.
+ */
+ if (f->is_mp) {
+ /* Now process the 1st packet */
+ priv->decode_fields(f, priv->multi_data, psmouse);
+ } else {
+ priv->multi_packet = 0;
+ }
+ }
+
+ /*
+ * "f.is_mp" would always be '0' after merging the 1st and 2nd packet.
+ * When it is set, it means 2nd packet comes without 1st packet come.
+ */
+ if (f->is_mp)
+ return;
+
+ /* Save the first packet */
+ if (!priv->multi_packet && f->first_mp) {
+ priv->multi_packet = 1;
+ memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
+ return;
+ }
+
+ priv->multi_packet = 0;
+
+ alps_report_mt_data(psmouse, (f->fingers <= 4) ? f->fingers : 4);
+
+ input_mt_report_finger_count(dev, f->fingers);
+
+ input_report_key(dev, BTN_LEFT, f->left);
+ input_report_key(dev, BTN_RIGHT, f->right);
+ input_report_key(dev, BTN_MIDDLE, f->middle);
+
+ input_report_abs(dev, ABS_PRESSURE, f->pressure);
+ input_sync(dev);
+}
+
+static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)
+{
+ if (psmouse->pktcnt == 4 && ((psmouse->packet[3] & 0x08) != 0x08))
+ return false;
+ if (psmouse->pktcnt == 6 && ((psmouse->packet[5] & 0x10) != 0x0))
+ return false;
+ return true;
+}
+
static DEFINE_MUTEX(alps_mutex);
static void alps_register_bare_ps2_mouse(struct work_struct *work)
bool report_buttons)
{
struct alps_data *priv = psmouse->private;
- struct input_dev *dev;
+ struct input_dev *dev, *dev2 = NULL;
/* Figure out which device to use to report the bare packet */
if (priv->proto_version == ALPS_PROTO_V2 &&
(priv->flags & ALPS_DUALPOINT)) {
/* On V2 devices the DualPoint Stick reports bare packets */
dev = priv->dev2;
+ dev2 = psmouse->dev;
} else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) {
/* Register dev3 mouse if we received PS/2 packet first time */
if (!IS_ERR(priv->dev3))
}
if (report_buttons)
- alps_report_buttons(dev, NULL,
+ alps_report_buttons(dev, dev2,
packet[0] & 1, packet[0] & 2, packet[0] & 4);
input_report_rel(dev, REL_X,
* a device connected to the external PS/2 port. Because bare PS/2
* protocol does not have enough constant bits to self-synchronize
* properly we only do this if the device is fully synchronized.
+ * Can not distinguish V8's first byte from PS/2 packet's
*/
- if (!psmouse->out_of_sync_cnt && (psmouse->packet[0] & 0xc8) == 0x08) {
+ if (priv->proto_version != ALPS_PROTO_V8 &&
+ !psmouse->out_of_sync_cnt &&
+ (psmouse->packet[0] & 0xc8) == 0x08) {
+
if (psmouse->pktcnt == 3) {
alps_report_bare_ps2_packet(psmouse, psmouse->packet,
true);
return PSMOUSE_BAD_DATA;
}
- if (priv->proto_version == ALPS_PROTO_V7 &&
- !alps_is_valid_package_v7(psmouse)) {
+ if ((priv->proto_version == ALPS_PROTO_V7 &&
+ !alps_is_valid_package_v7(psmouse)) ||
+ (priv->proto_version == ALPS_PROTO_V8 &&
+ !alps_is_valid_package_ss4_v2(psmouse))) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
psmouse->packet[psmouse->pktcnt - 1]);
return -1;
}
+static int alps_get_otp_values_ss4_v2(struct psmouse *psmouse,
+ unsigned char index, unsigned char otp[])
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ switch (index) {
+ case 0:
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
+ return -1;
+
+ break;
+
+ case 1:
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) ||
+ ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO))
+ return -1;
+
+ break;
+ }
+
+ return 0;
+}
+
+static int alps_update_device_area_ss4_v2(unsigned char otp[][4],
+ struct alps_data *priv)
+{
+ int num_x_electrode;
+ int num_y_electrode;
+ int x_pitch, y_pitch, x_phys, y_phys;
+
+ num_x_electrode = SS4_NUMSENSOR_XOFFSET + (otp[1][0] & 0x0F);
+ num_y_electrode = SS4_NUMSENSOR_YOFFSET + ((otp[1][0] >> 4) & 0x0F);
+
+ priv->x_max = (num_x_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
+ priv->y_max = (num_y_electrode - 1) * SS4_COUNT_PER_ELECTRODE;
+
+ x_pitch = ((otp[1][2] >> 2) & 0x07) + SS4_MIN_PITCH_MM;
+ y_pitch = ((otp[1][2] >> 5) & 0x07) + SS4_MIN_PITCH_MM;
+
+ x_phys = x_pitch * (num_x_electrode - 1); /* In 0.1 mm units */
+ y_phys = y_pitch * (num_y_electrode - 1); /* In 0.1 mm units */
+
+ priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */
+ priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */
+
+ return 0;
+}
+
+static int alps_update_btn_info_ss4_v2(unsigned char otp[][4],
+ struct alps_data *priv)
+{
+ unsigned char is_btnless;
+
+ is_btnless = (otp[1][1] >> 3) & 0x01;
+
+ if (is_btnless)
+ priv->flags |= ALPS_BUTTONPAD;
+
+ return 0;
+}
+
+static int alps_set_defaults_ss4_v2(struct psmouse *psmouse,
+ struct alps_data *priv)
+{
+ unsigned char otp[2][4];
+
+ memset(otp, 0, sizeof(otp));
+
+ if (alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]) ||
+ alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0]))
+ return -1;
+
+ alps_update_device_area_ss4_v2(otp, priv);
+
+ alps_update_btn_info_ss4_v2(otp, priv);
+
+ return 0;
+}
+
static int alps_dolphin_get_device_area(struct psmouse *psmouse,
struct alps_data *priv)
{
return ret;
}
+static int alps_hw_init_ss4_v2(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ char param[2] = {0x64, 0x28};
+ int ret = -1;
+
+ /* enter absolute mode */
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) ||
+ ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) {
+ goto error;
+ }
+
+ /* T.B.D. Decread noise packet number, delete in the future */
+ if (alps_exit_command_mode(psmouse) ||
+ alps_enter_command_mode(psmouse) ||
+ alps_command_mode_write_reg(psmouse, 0x001D, 0x20)) {
+ goto error;
+ }
+ alps_exit_command_mode(psmouse);
+
+ return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+
+error:
+ alps_exit_command_mode(psmouse);
+ return ret;
+}
+
static int alps_set_protocol(struct psmouse *psmouse,
struct alps_data *priv,
const struct alps_protocol_info *protocol)
priv->hw_init = alps_hw_init_v7;
priv->process_packet = alps_process_packet_v7;
priv->decode_fields = alps_decode_packet_v7;
- priv->set_abs_params = alps_set_abs_params_mt;
+ priv->set_abs_params = alps_set_abs_params_v7;
priv->nibble_commands = alps_v3_nibble_commands;
priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
priv->x_max = 0xfff;
priv->flags |= ALPS_BUTTONPAD;
break;
+
+ case ALPS_PROTO_V8:
+ priv->hw_init = alps_hw_init_ss4_v2;
+ priv->process_packet = alps_process_packet_ss4_v2;
+ priv->decode_fields = alps_decode_ss4_v2;
+ priv->set_abs_params = alps_set_abs_params_ss4_v2;
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+
+ if (alps_set_defaults_ss4_v2(psmouse, priv))
+ return -EIO;
+
+ break;
}
return 0;
} else if (ec[0] == 0x88 && ec[1] == 0x07 &&
ec[2] >= 0x90 && ec[2] <= 0x9d) {
protocol = &alps_v3_protocol_data;
+ } else if (e7[0] == 0x73 && e7[1] == 0x03 &&
+ e7[2] == 0x14 && ec[1] == 0x02) {
+ protocol = &alps_v8_protocol_data;
} else {
psmouse_dbg(psmouse,
"Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec);
{
input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0);
input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0);
+ input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
}
-static void alps_set_abs_params_mt(struct alps_data *priv,
- struct input_dev *dev1)
+static void alps_set_abs_params_mt_common(struct alps_data *priv,
+ struct input_dev *dev1)
{
input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res);
input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res);
- input_mt_init_slots(dev1, MAX_TOUCHES, INPUT_MT_POINTER |
- INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK | INPUT_MT_SEMI_MT);
-
set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
+}
+
+static void alps_set_abs_params_mt(struct alps_data *priv,
+ struct input_dev *dev1)
+{
+ alps_set_abs_params_mt_common(priv, dev1);
+ input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
+
+ input_mt_init_slots(dev1, MAX_TOUCHES,
+ INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
+ INPUT_MT_TRACK | INPUT_MT_SEMI_MT);
+}
+
+static void alps_set_abs_params_v7(struct alps_data *priv,
+ struct input_dev *dev1)
+{
+ alps_set_abs_params_mt_common(priv, dev1);
+ set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
+
+ input_mt_init_slots(dev1, MAX_TOUCHES,
+ INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
+ INPUT_MT_TRACK);
+
+ set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
+}
+
+static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
+ struct input_dev *dev1)
+{
+ alps_set_abs_params_mt_common(priv, dev1);
+ input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
+ set_bit(BTN_TOOL_QUINTTAP, dev1->keybit);
- /* V7 is real multi-touch */
- if (priv->proto_version == ALPS_PROTO_V7)
- clear_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
+ input_mt_init_slots(dev1, MAX_TOUCHES,
+ INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
+ INPUT_MT_TRACK);
}
int alps_init(struct psmouse *psmouse)
dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
priv->set_abs_params(priv, dev1);
- /* No pressure on V7 */
- if (priv->proto_version != ALPS_PROTO_V7)
- input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
if (priv->flags & ALPS_WHEEL) {
dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
#define ALPS_PROTO_V5 0x500
#define ALPS_PROTO_V6 0x600
#define ALPS_PROTO_V7 0x700 /* t3btl t4s */
+#define ALPS_PROTO_V8 0x800 /* SS4btl SS4s */
-#define MAX_TOUCHES 2
+#define MAX_TOUCHES 4
#define DOLPHIN_COUNT_PER_ELECTRODE 64
#define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */
#define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */
+/*
+ * enum SS4_PACKET_ID - defines the packet type for V8
+ * SS4_PACKET_ID_IDLE: There's no finger and no button activity.
+ * SS4_PACKET_ID_ONE: There's one finger on touchpad
+ * or there's button activities.
+ * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
+ * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
+*/
+enum SS4_PACKET_ID {
+ SS4_PACKET_ID_IDLE = 0,
+ SS4_PACKET_ID_ONE,
+ SS4_PACKET_ID_TWO,
+ SS4_PACKET_ID_MULTI,
+};
+
+#define SS4_COUNT_PER_ELECTRODE 256
+#define SS4_NUMSENSOR_XOFFSET 7
+#define SS4_NUMSENSOR_YOFFSET 7
+#define SS4_MIN_PITCH_MM 50
+
+#define SS4_MASK_NORMAL_BUTTONS 0x07
+
+#define SS4_1F_X_V2(_b) ((_b[0] & 0x0007) | \
+ ((_b[1] << 3) & 0x0078) | \
+ ((_b[1] << 2) & 0x0380) | \
+ ((_b[2] << 5) & 0x1C00) \
+ )
+
+#define SS4_1F_Y_V2(_b) (((_b[2]) & 0x000F) | \
+ ((_b[3] >> 2) & 0x0030) | \
+ ((_b[4] << 6) & 0x03C0) | \
+ ((_b[4] << 5) & 0x0C00) \
+ )
+
+#define SS4_1F_Z_V2(_b) (((_b[5]) & 0x0F) | \
+ ((_b[5] >> 1) & 0x70) | \
+ ((_b[4]) & 0x80) \
+ )
+
+#define SS4_1F_LFB_V2(_b) (((_b[2] >> 4) & 0x01) == 0x01)
+
+#define SS4_MF_LF_V2(_b, _i) ((_b[1 + (_i) * 3] & 0x0004) == 0x0004)
+
+#define SS4_BTN_V2(_b) ((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS)
+
+#define SS4_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 5) & 0x00E0) | \
+ ((_b[1 + _i * 3] << 5) & 0x1F00) \
+ )
+
+#define SS4_STD_MF_Y_V2(_b, _i) (((_b[1 + (_i) * 3] << 3) & 0x0010) | \
+ ((_b[2 + (_i) * 3] << 5) & 0x01E0) | \
+ ((_b[2 + (_i) * 3] << 4) & 0x0E00) \
+ )
+
+#define SS4_BTL_MF_X_V2(_b, _i) (SS4_STD_MF_X_V2(_b, _i) | \
+ ((_b[0 + (_i) * 3] >> 3) & 0x0010) \
+ )
+
+#define SS4_BTL_MF_Y_V2(_b, _i) (SS4_STD_MF_Y_V2(_b, _i) | \
+ ((_b[0 + (_i) * 3] >> 3) & 0x0008) \
+ )
+
+#define SS4_MF_Z_V2(_b, _i) (((_b[1 + (_i) * 3]) & 0x0001) | \
+ ((_b[1 + (_i) * 3] >> 1) & 0x0002) \
+ )
+
+#define SS4_IS_MF_CONTINUE(_b) ((_b[2] & 0x10) == 0x10)
+#define SS4_IS_5F_DETECTED(_b) ((_b[2] & 0x10) == 0x10)
+
+
+#define SS4_MFPACKET_NO_AX 8160 /* X-Coordinate value */
+#define SS4_MFPACKET_NO_AY 4080 /* Y-Coordinate value */
+#define SS4_MFPACKET_NO_AX_BL 8176 /* Buttonless X-Coordinate value */
+#define SS4_MFPACKET_NO_AY_BL 4088 /* Buttonless Y-Coordinate value */
+
/*
* enum V7_PACKET_ID - defines the packet type for V7
* V7_PACKET_ID_IDLE: There's no finger and no button activity.
*/
#ifndef _ELAN_I2C_H
-#define _ELAN_i2C_H
+#define _ELAN_I2C_H
#include <linux/types.h>
error = regulator_enable(data->vcc);
if (error) {
dev_err(&data->client->dev,
- "Failed to enable regulator: %d\n", error);
+ "failed to enable regulator: %d\n", error);
return error;
}
msleep(30);
} while (--repeat > 0);
+ dev_err(&data->client->dev, "failed to enable power: %d\n", error);
return error;
}
error = regulator_disable(data->vcc);
if (error) {
dev_err(&data->client->dev,
- "Failed to disable regulator: %d\n",
+ "failed to disable regulator: %d\n",
error);
/* Attempt to power the chip back up */
data->ops->power_control(data->client, true);
msleep(30);
} while (--repeat > 0);
+ dev_err(&data->client->dev, "failed to disable power: %d\n", error);
return error;
}
if (!error)
return 0;
- repeat--;
msleep(30);
} while (--repeat > 0);
}
error = elan_enable_power(data);
- if (error)
+ if (error) {
dev_err(dev, "power up when resuming failed: %d\n", error);
+ goto err;
+ }
error = elan_initialize(data);
if (error)
dev_err(dev, "initialize when resuming failed: %d\n", error);
+err:
enable_irq(data->client->irq);
-
- return 0;
+ return error;
}
static SIMPLE_DEV_PM_OPS(elan_pm_ops, elan_suspend, elan_resume);
int ret;
ret = i2c_transfer(client->adapter, &msg, 1);
- return ret == 1 ? 0 : (ret < 0 ? ret : -EIO);
+ if (ret != 1) {
+ if (ret >= 0)
+ ret = -EIO;
+ dev_err(&client->dev, "writing cmd (0x%04x) failed: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ return 0;
}
static int elan_i2c_initialize(struct i2c_client *client)
return PSMOUSE_FULL_PACKET;
}
+/*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+ unsigned int rate)
+{
+ struct elantech_data *etd = psmouse->private;
+
+ etd->original_set_rate(psmouse, rate);
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
/*
* Put the touchpad into absolute mode
*/
* Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
* Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
* Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
+ * Asus TP500LN 0x381f17 10, 14, 0e clickpad
+ * Asus X750JN 0x381f17 10, 14, 0e clickpad
* Asus UX31 0x361f00 20, 15, 0e clickpad
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
goto init_fail;
}
+ if (etd->fw_version == 0x381f17) {
+ etd->original_set_rate = psmouse->set_rate;
+ psmouse->set_rate = elantech_set_rate_restore_reg_07;
+ }
+
if (elantech_set_input_params(psmouse)) {
psmouse_err(psmouse, "failed to query touchpad range.\n");
goto init_fail;
struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+ void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
};
#ifdef CONFIG_MOUSE_PS2_ELANTECH
int lifebook_detect(struct psmouse *psmouse, bool set_properties)
{
- if (!lifebook_present)
- return -1;
+ if (!lifebook_present)
+ return -1;
if (desired_serio_phys &&
strcmp(psmouse->ps2dev.serio->phys, desired_serio_phys))
psmouse->name = "Lifebook TouchScreen";
}
- return 0;
+ return 0;
}
static int lifebook_create_relative_device(struct psmouse *psmouse)
PSMOUSE_CMD_POLL | (psmouse->pktsize << 8));
}
+static bool psmouse_check_pnp_id(const char *id, const char * const ids[])
+{
+ int i;
+
+ for (i = 0; ids[i]; i++)
+ if (!strcasecmp(id, ids[i]))
+ return true;
+
+ return false;
+}
+
/*
* psmouse_matches_pnp_id - check if psmouse matches one of the passed in ids.
*/
bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[])
{
- int i;
-
- if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4))
- for (i = 0; ids[i]; i++)
- if (strstr(psmouse->ps2dev.serio->firmware_id, ids[i]))
- return true;
+ struct serio *serio = psmouse->ps2dev.serio;
+ char *p, *fw_id_copy, *save_ptr;
+ bool found = false;
+
+ if (strncmp(serio->firmware_id, "PNP: ", 5))
+ return false;
+
+ fw_id_copy = kstrndup(&serio->firmware_id[5],
+ sizeof(serio->firmware_id) - 5,
+ GFP_KERNEL);
+ if (!fw_id_copy)
+ return false;
+
+ save_ptr = fw_id_copy;
+ while ((p = strsep(&fw_id_copy, " ")) != NULL) {
+ if (psmouse_check_pnp_id(p, ids)) {
+ found = true;
+ break;
+ }
+ }
- return false;
+ kfree(save_ptr);
+ return found;
}
/*
#define X_MAX_POSITIVE 8176
#define Y_MAX_POSITIVE 8176
+/* maximum ABS_MT_POSITION displacement (in mm) */
+#define DMAX 10
+
/*****************************************************************************
* Stuff we need even when we do not want native Synaptics support
****************************************************************************/
NULL
};
+/* This list has been kindly provided by Synaptics. */
+static const char * const forcepad_pnp_ids[] = {
+ "SYN300D",
+ "SYN3014",
+ NULL
+};
+
/*****************************************************************************
* Synaptics communications functions
****************************************************************************/
hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits;
}
-static bool is_forcepad;
-
static int synaptics_parse_hw_state(const unsigned char buf[],
struct synaptics_data *priv,
struct synaptics_hw_state *hw)
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (is_forcepad) {
+ if (priv->is_forcepad) {
/*
* ForcePads, like Clickpads, use middle button
* bits to report primary button clicks.
pos[i].y = synaptics_invert_y(hw[i]->y);
}
- input_mt_assign_slots(dev, slot, pos, nsemi, 0);
+ input_mt_assign_slots(dev, slot, pos, nsemi, DMAX * priv->x_res);
for (i = 0; i < nsemi; i++) {
input_mt_slot(dev, slot[i]);
ABS_MT_POSITION_Y);
/* Image sensors can report per-contact pressure */
input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
- input_mt_init_slots(dev, 2, INPUT_MT_POINTER | INPUT_MT_TRACK);
+ input_mt_init_slots(dev, 3, INPUT_MT_POINTER | INPUT_MT_TRACK);
/* Image sensors can signal 4 and 5 finger clicks */
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
{ }
};
-static const struct dmi_system_id forcepad_dmi_table[] __initconst = {
-#if defined(CONFIG_DMI) && defined(CONFIG_X86)
- {
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Folio 1040 G1"),
- },
- },
-#endif
- { }
-};
-
void __init synaptics_module_init(void)
{
impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
broken_olpc_ec = dmi_check_system(olpc_dmi_table);
cr48_profile_sensor = dmi_check_system(cr48_dmi_table);
-
- /*
- * Unfortunately ForcePad capability is not exported over PS/2,
- * so we have to resort to checking DMI.
- */
- is_forcepad = dmi_check_system(forcepad_dmi_table);
}
static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
if (SYN_ID_DISGEST_SUPPORTED(priv->identity))
priv->disable_gesture = true;
+ /*
+ * Unfortunately ForcePad capability is not exported over PS/2,
+ * so we have to resort to checking PNP IDs.
+ */
+ priv->is_forcepad = psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids);
+
if (synaptics_set_mode(psmouse)) {
psmouse_err(psmouse, "Unable to initialize device.\n");
goto init_fail;
unsigned long press_start;
bool press;
bool report_press;
+ bool is_forcepad;
};
void synaptics_module_init(void);
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <linux/pci_ids.h>
#include <asm/irq.h>
#include <asm/io.h>
static int i8042_pm_suspend(struct device *dev)
{
+ int i;
+
i8042_controller_reset(true);
+ /* Set up serio interrupts for system wakeup. */
+ for (i = 0; i < I8042_NUM_PORTS; i++) {
+ struct serio *serio = i8042_ports[i].serio;
+
+ if (serio && device_may_wakeup(&serio->dev))
+ enable_irq_wake(i8042_ports[i].irq);
+ }
+
return 0;
}
static int i8042_pm_resume(struct device *dev)
{
+ int i;
+
+ for (i = 0; i < I8042_NUM_PORTS; i++) {
+ struct serio *serio = i8042_ports[i].serio;
+
+ if (serio && device_may_wakeup(&serio->dev))
+ disable_irq_wake(i8042_ports[i].irq);
+ }
+
/*
* On resume from S2R we always try to reset the controller
* to bring it in a sane state. (In case of S2D we expect
int i;
for (i = 0; i < I8042_NUM_PORTS; i++) {
- if (i8042_ports[i].serio) {
+ struct serio *serio = i8042_ports[i].serio;
+
+ if (serio) {
printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
- i8042_ports[i].serio->name,
+ serio->name,
(unsigned long) I8042_DATA_REG,
(unsigned long) I8042_COMMAND_REG,
i8042_ports[i].irq);
- serio_register_port(i8042_ports[i].serio);
+ serio_register_port(serio);
+ device_set_wakeup_capable(&serio->dev, true);
}
}
}
To compile this driver as a module, choose M here: the
module will be called bu21013_ts.
+config TOUCHSCREEN_CHIPONE_ICN8318
+ tristate "chipone icn8318 touchscreen controller"
+ depends on GPIOLIB
+ depends on I2C
+ depends on OF
+ help
+ Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called chipone_icn8318.
+
config TOUCHSCREEN_CY8CTMG110
tristate "cy8ctmg110 touchscreen"
depends on I2C
config TOUCHSCREEN_GOODIX
tristate "Goodix I2C touchscreen"
- depends on I2C && ACPI
+ depends on I2C
help
Say Y here if you have the Goodix touchscreen (such as one
installed in Onda v975w tablets) connected to your
- system.
+ system. It also supports 5-finger chip models, which can be
+ found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called ili210x.
+config TOUCHSCREEN_IPROC
+ tristate "IPROC touch panel driver support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ help
+ Say Y here if you want to add support for the IPROC touch
+ controller to your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm_iproc_tsc.
+
config TOUCHSCREEN_S3C2410
tristate "Samsung S3C2410/generic touchscreen input driver"
depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
To compile this driver as a module, choose M here: the
module will be called sur40.
+config TOUCHSCREEN_SX8654
+ tristate "Semtech SX8654 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a Semtech SX8654 touchscreen controller.
+
+ If unsure, say N
+
+ To compile this driver as a module, choose M here: the
+ module will be called sx8654.
+
config TOUCHSCREEN_TPS6507X
tristate "TPS6507x based touchscreens"
depends on I2C
obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o
obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o
obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o
obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
+obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o
obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o
obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
};
MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id);
-static struct of_device_id ar1021_i2c_of_match[] = {
+static const struct of_device_id ar1021_i2c_of_match[] = {
{ .compatible = "microchip,ar1021-i2c", },
{ }
};
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/slab.h>
+#include <asm/unaligned.h>
/* Version */
#define MXT_VER_20 20
#define MXT_SPT_DIGITIZER_T43 43
#define MXT_SPT_MESSAGECOUNT_T44 44
#define MXT_SPT_CTECONFIG_T46 46
+#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
/* MXT_GEN_MESSAGE_T5 object */
#define MXT_RPTID_NOMSG 0xff
#define MXT_RESET_VALUE 0x01
#define MXT_BACKUP_VALUE 0x55
+/* T100 Multiple Touch Touchscreen */
+#define MXT_T100_CTRL 0
+#define MXT_T100_CFG1 1
+#define MXT_T100_TCHAUX 3
+#define MXT_T100_XRANGE 13
+#define MXT_T100_YRANGE 24
+
+#define MXT_T100_CFG_SWITCHXY BIT(5)
+
+#define MXT_T100_TCHAUX_VECT BIT(0)
+#define MXT_T100_TCHAUX_AMPL BIT(1)
+#define MXT_T100_TCHAUX_AREA BIT(2)
+
+#define MXT_T100_DETECT BIT(7)
+#define MXT_T100_TYPE_MASK 0x70
+
+enum t100_type {
+ MXT_T100_TYPE_FINGER = 1,
+ MXT_T100_TYPE_PASSIVE_STYLUS = 2,
+ MXT_T100_TYPE_HOVERING_FINGER = 4,
+ MXT_T100_TYPE_GLOVE = 5,
+ MXT_T100_TYPE_LARGE_TOUCH = 6,
+};
+
+#define MXT_DISTANCE_ACTIVE_TOUCH 0
+#define MXT_DISTANCE_HOVERING 1
+
+#define MXT_TOUCH_MAJOR_DEFAULT 1
+#define MXT_PRESSURE_DEFAULT 1
+
/* Delay times */
#define MXT_BACKUP_TIME 50 /* msec */
#define MXT_RESET_TIME 200 /* msec */
unsigned int max_y;
bool in_bootloader;
u16 mem_size;
+ u8 t100_aux_ampl;
+ u8 t100_aux_area;
+ u8 t100_aux_vect;
u8 max_reportid;
u32 config_crc;
u32 info_crc;
bool update_input;
u8 last_message_count;
u8 num_touchids;
+ u8 multitouch;
/* Cached parameters from object table */
u16 T5_address;
u8 T9_reportid_max;
u8 T19_reportid;
u16 T44_address;
+ u8 T100_reportid_min;
+ u8 T100_reportid_max;
/* for fw update in bootloader */
struct completion bl_completion;
data->update_input = true;
}
+static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
+{
+ struct device *dev = &data->client->dev;
+ struct input_dev *input_dev = data->input_dev;
+ int id;
+ u8 status;
+ u8 type = 0;
+ u16 x;
+ u16 y;
+ int distance = 0;
+ int tool = 0;
+ u8 major = 0;
+ u8 pressure = 0;
+ u8 orientation = 0;
+
+ id = message[0] - data->T100_reportid_min - 2;
+
+ /* ignore SCRSTATUS events */
+ if (id < 0)
+ return;
+
+ status = message[1];
+ x = get_unaligned_le16(&message[2]);
+ y = get_unaligned_le16(&message[4]);
+
+ if (status & MXT_T100_DETECT) {
+ type = (status & MXT_T100_TYPE_MASK) >> 4;
+
+ switch (type) {
+ case MXT_T100_TYPE_HOVERING_FINGER:
+ tool = MT_TOOL_FINGER;
+ distance = MXT_DISTANCE_HOVERING;
+
+ if (data->t100_aux_vect)
+ orientation = message[data->t100_aux_vect];
+
+ break;
+
+ case MXT_T100_TYPE_FINGER:
+ case MXT_T100_TYPE_GLOVE:
+ tool = MT_TOOL_FINGER;
+ distance = MXT_DISTANCE_ACTIVE_TOUCH;
+
+ if (data->t100_aux_area)
+ major = message[data->t100_aux_area];
+
+ if (data->t100_aux_ampl)
+ pressure = message[data->t100_aux_ampl];
+
+ if (data->t100_aux_vect)
+ orientation = message[data->t100_aux_vect];
+
+ break;
+
+ case MXT_T100_TYPE_PASSIVE_STYLUS:
+ tool = MT_TOOL_PEN;
+
+ /*
+ * Passive stylus is reported with size zero so
+ * hardcode.
+ */
+ major = MXT_TOUCH_MAJOR_DEFAULT;
+
+ if (data->t100_aux_ampl)
+ pressure = message[data->t100_aux_ampl];
+
+ break;
+
+ case MXT_T100_TYPE_LARGE_TOUCH:
+ /* Ignore suppressed touch */
+ break;
+
+ default:
+ dev_dbg(dev, "Unexpected T100 type\n");
+ return;
+ }
+ }
+
+ /*
+ * Values reported should be non-zero if tool is touching the
+ * device
+ */
+ if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+ pressure = MXT_PRESSURE_DEFAULT;
+
+ input_mt_slot(input_dev, id);
+
+ if (status & MXT_T100_DETECT) {
+ dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
+ id, type, x, y, major, pressure, orientation);
+
+ input_mt_report_slot_state(input_dev, tool, 1);
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
+ input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+ input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
+ input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+ } else {
+ dev_dbg(dev, "[%u] release\n", id);
+
+ /* close out slot */
+ input_mt_report_slot_state(input_dev, 0, 0);
+ }
+
+ data->update_input = true;
+}
+
static int mxt_proc_message(struct mxt_data *data, u8 *message)
{
u8 report_id = message[0];
* is not yet registered.
*/
mxt_dump_message(data, message);
- } else if (report_id >= data->T9_reportid_min
- && report_id <= data->T9_reportid_max) {
+ } else if (report_id >= data->T9_reportid_min &&
+ report_id <= data->T9_reportid_max) {
mxt_proc_t9_message(data, message);
+ } else if (report_id >= data->T100_reportid_min &&
+ report_id <= data->T100_reportid_max) {
+ mxt_proc_t100_message(data, message);
} else if (report_id == data->T19_reportid) {
mxt_input_button(data, message);
data->update_input = true;
data->T9_reportid_max = 0;
data->T19_reportid = 0;
data->T44_address = 0;
+ data->T100_reportid_min = 0;
+ data->T100_reportid_max = 0;
data->max_reportid = 0;
}
data->T7_address = object->start_address;
break;
case MXT_TOUCH_MULTI_T9:
+ data->multitouch = MXT_TOUCH_MULTI_T9;
data->T9_reportid_min = min_id;
data->T9_reportid_max = max_id;
data->num_touchids = object->num_report_ids
case MXT_SPT_GPIOPWM_T19:
data->T19_reportid = min_id;
break;
+ case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+ data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
+ data->T100_reportid_min = min_id;
+ data->T100_reportid_max = max_id;
+ /* first two report IDs reserved */
+ data->num_touchids = object->num_report_ids - 2;
+ break;
}
end_address = object->start_address
return 0;
}
+static int mxt_read_t100_config(struct mxt_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+ struct mxt_object *object;
+ u16 range_x, range_y;
+ u8 cfg, tchaux;
+ u8 aux;
+
+ object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
+ if (!object)
+ return -EINVAL;
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T100_XRANGE,
+ sizeof(range_x), &range_x);
+ if (error)
+ return error;
+
+ le16_to_cpus(&range_x);
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T100_YRANGE,
+ sizeof(range_y), &range_y);
+ if (error)
+ return error;
+
+ le16_to_cpus(&range_y);
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T100_CFG1,
+ 1, &cfg);
+ if (error)
+ return error;
+
+ error = __mxt_read_reg(client,
+ object->start_address + MXT_T100_TCHAUX,
+ 1, &tchaux);
+ if (error)
+ return error;
+
+ /* Handle default values */
+ if (range_x == 0)
+ range_x = 1023;
+
+ if (range_y == 0)
+ range_y = 1023;
+
+ if (cfg & MXT_T100_CFG_SWITCHXY) {
+ data->max_x = range_y;
+ data->max_y = range_x;
+ } else {
+ data->max_x = range_x;
+ data->max_y = range_y;
+ }
+
+ /* allocate aux bytes */
+ aux = 6;
+
+ if (tchaux & MXT_T100_TCHAUX_VECT)
+ data->t100_aux_vect = aux++;
+
+ if (tchaux & MXT_T100_TCHAUX_AMPL)
+ data->t100_aux_ampl = aux++;
+
+ if (tchaux & MXT_T100_TCHAUX_AREA)
+ data->t100_aux_area = aux++;
+
+ dev_dbg(&client->dev,
+ "T100 aux mappings vect:%u ampl:%u area:%u\n",
+ data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
+
+ dev_info(&client->dev,
+ "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+ return 0;
+}
+
static int mxt_input_open(struct input_dev *dev);
static void mxt_input_close(struct input_dev *dev);
-static int mxt_initialize_t9_input_device(struct mxt_data *data)
+static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
+ struct mxt_data *data)
{
- struct device *dev = &data->client->dev;
const struct mxt_platform_data *pdata = data->pdata;
+ int i;
+
+ input_dev->name = "Atmel maXTouch Touchpad";
+
+ __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+ input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+ input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+ MXT_PIXELS_PER_MM);
+ input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+ MXT_PIXELS_PER_MM);
+
+ for (i = 0; i < pdata->t19_num_keys; i++)
+ if (pdata->t19_keymap[i] != KEY_RESERVED)
+ input_set_capability(input_dev, EV_KEY,
+ pdata->t19_keymap[i]);
+}
+
+static int mxt_initialize_input_device(struct mxt_data *data)
+{
+ const struct mxt_platform_data *pdata = data->pdata;
+ struct device *dev = &data->client->dev;
struct input_dev *input_dev;
int error;
unsigned int num_mt_slots;
unsigned int mt_flags = 0;
- int i;
- error = mxt_read_t9_resolution(data);
- if (error)
- dev_warn(dev, "Failed to initialize T9 resolution\n");
+ switch (data->multitouch) {
+ case MXT_TOUCH_MULTI_T9:
+ num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+ error = mxt_read_t9_resolution(data);
+ if (error)
+ dev_warn(dev, "Failed to initialize T9 resolution\n");
+ break;
+
+ case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+ num_mt_slots = data->num_touchids;
+ error = mxt_read_t100_config(data);
+ if (error)
+ dev_warn(dev, "Failed to read T100 config\n");
+ break;
+
+ default:
+ dev_err(dev, "Invalid multitouch object\n");
+ return -EINVAL;
+ }
input_dev = input_allocate_device();
if (!input_dev) {
input_dev->open = mxt_input_open;
input_dev->close = mxt_input_close;
- __set_bit(EV_ABS, input_dev->evbit);
- __set_bit(EV_KEY, input_dev->evbit);
- __set_bit(BTN_TOUCH, input_dev->keybit);
+ input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
- if (pdata->t19_num_keys) {
- __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+ /* For single touch */
+ input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
- for (i = 0; i < pdata->t19_num_keys; i++)
- if (pdata->t19_keymap[i] != KEY_RESERVED)
- input_set_capability(input_dev, EV_KEY,
- pdata->t19_keymap[i]);
+ if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+ (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->t100_aux_ampl)) {
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+ }
+ /* If device has buttons we assume it is a touchpad */
+ if (pdata->t19_num_keys) {
+ mxt_set_up_as_touchpad(input_dev, data);
mt_flags |= INPUT_MT_POINTER;
-
- input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
- input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
- input_abs_set_res(input_dev, ABS_MT_POSITION_X,
- MXT_PIXELS_PER_MM);
- input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
- MXT_PIXELS_PER_MM);
-
- input_dev->name = "Atmel maXTouch Touchpad";
}
- /* For single touch */
- input_set_abs_params(input_dev, ABS_X,
- 0, data->max_x, 0, 0);
- input_set_abs_params(input_dev, ABS_Y,
- 0, data->max_y, 0, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE,
- 0, 255, 0, 0);
-
/* For multi touch */
- num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
if (error) {
dev_err(dev, "Error %d initialising slots\n", error);
goto err_free_mem;
}
- input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
- 0, MXT_MAX_AREA, 0, 0);
+ if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
+ input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+ 0, MT_TOOL_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_DISTANCE,
+ MXT_DISTANCE_ACTIVE_TOUCH,
+ MXT_DISTANCE_HOVERING,
+ 0, 0);
+ }
+
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, data->max_x, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, data->max_y, 0, 0);
- input_set_abs_params(input_dev, ABS_MT_PRESSURE,
- 0, 255, 0, 0);
+
+ if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+ (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->t100_aux_area)) {
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ 0, MXT_MAX_AREA, 0, 0);
+ }
+
+ if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+ (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->t100_aux_ampl)) {
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+ 0, 255, 0, 0);
+ }
+
+ if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->t100_aux_vect) {
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+ 0, 255, 0, 0);
+ }
+
+ if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->t100_aux_ampl) {
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+ 0, 255, 0, 0);
+ }
+
+ if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+ data->t100_aux_vect) {
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+ 0, 255, 0, 0);
+ }
input_set_drvdata(input_dev, data);
dev_warn(dev, "Error %d updating config\n", error);
}
- error = mxt_initialize_t9_input_device(data);
- if (error)
- return error;
+ if (data->multitouch) {
+ error = mxt_initialize_input_device(data);
+ if (error)
+ return error;
+ } else {
+ dev_warn(dev, "No touch object detected\n");
+ }
dev_info(dev,
"Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
static void mxt_start(struct mxt_data *data)
{
/* Touch enable */
- mxt_write_object(data,
- MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83);
+ mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0x83);
}
static void mxt_stop(struct mxt_data *data)
{
/* Touch disable */
- mxt_write_object(data,
- MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0);
+ mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0);
}
static int mxt_input_open(struct input_dev *dev)
--- /dev/null
+/*
+* Copyright (C) 2015 Broadcom Corporation
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation version 2.
+*
+* This program is distributed "as is" WITHOUT ANY WARRANTY of any
+* kind, whether express or implied; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/serio.h>
+
+#define IPROC_TS_NAME "iproc-ts"
+
+#define PEN_DOWN_STATUS 1
+#define PEN_UP_STATUS 0
+
+#define X_MIN 0
+#define Y_MIN 0
+#define X_MAX 0xFFF
+#define Y_MAX 0xFFF
+
+/* Value given by controller for invalid coordinate. */
+#define INVALID_COORD 0xFFFFFFFF
+
+/* Register offsets */
+#define REGCTL1 0x00
+#define REGCTL2 0x04
+#define INTERRUPT_THRES 0x08
+#define INTERRUPT_MASK 0x0c
+
+#define INTERRUPT_STATUS 0x10
+#define CONTROLLER_STATUS 0x14
+#define FIFO_DATA 0x18
+#define FIFO_DATA_X_Y_MASK 0xFFFF
+#define ANALOG_CONTROL 0x1c
+
+#define AUX_DATA 0x20
+#define DEBOUNCE_CNTR_STAT 0x24
+#define SCAN_CNTR_STAT 0x28
+#define REM_CNTR_STAT 0x2c
+
+#define SETTLING_TIMER_STAT 0x30
+#define SPARE_REG 0x34
+#define SOFT_BYPASS_CONTROL 0x38
+#define SOFT_BYPASS_DATA 0x3c
+
+
+/* Bit values for INTERRUPT_MASK and INTERRUPT_STATUS regs */
+#define TS_PEN_INTR_MASK BIT(0)
+#define TS_FIFO_INTR_MASK BIT(2)
+
+/* Bit values for CONTROLLER_STATUS reg1 */
+#define TS_PEN_DOWN BIT(0)
+
+/* Shift values for control reg1 */
+#define SCANNING_PERIOD_SHIFT 24
+#define DEBOUNCE_TIMEOUT_SHIFT 16
+#define SETTLING_TIMEOUT_SHIFT 8
+#define TOUCH_TIMEOUT_SHIFT 0
+
+/* Shift values for coordinates from fifo */
+#define X_COORD_SHIFT 0
+#define Y_COORD_SHIFT 16
+
+/* Bit values for REGCTL2 */
+#define TS_CONTROLLER_EN_BIT BIT(16)
+#define TS_CONTROLLER_AVGDATA_SHIFT 8
+#define TS_CONTROLLER_AVGDATA_MASK (0x7 << TS_CONTROLLER_AVGDATA_SHIFT)
+#define TS_CONTROLLER_PWR_LDO BIT(5)
+#define TS_CONTROLLER_PWR_ADC BIT(4)
+#define TS_CONTROLLER_PWR_BGP BIT(3)
+#define TS_CONTROLLER_PWR_TS BIT(2)
+#define TS_WIRE_MODE_BIT BIT(1)
+
+#define dbg_reg(dev, priv, reg) \
+ dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
+
+struct tsc_param {
+ /* Each step is 1024 us. Valid 1-256 */
+ u32 scanning_period;
+
+ /* Each step is 512 us. Valid 0-255 */
+ u32 debounce_timeout;
+
+ /*
+ * The settling duration (in ms) is the amount of time the tsc
+ * waits to allow the voltage to settle after turning on the
+ * drivers in detection mode. Valid values: 0-11
+ * 0 = 0.008 ms
+ * 1 = 0.01 ms
+ * 2 = 0.02 ms
+ * 3 = 0.04 ms
+ * 4 = 0.08 ms
+ * 5 = 0.16 ms
+ * 6 = 0.32 ms
+ * 7 = 0.64 ms
+ * 8 = 1.28 ms
+ * 9 = 2.56 ms
+ * 10 = 5.12 ms
+ * 11 = 10.24 ms
+ */
+ u32 settling_timeout;
+
+ /* touch timeout in sample counts */
+ u32 touch_timeout;
+
+ /*
+ * Number of data samples which are averaged before a final data point
+ * is placed into the FIFO
+ */
+ u32 average_data;
+
+ /* FIFO threshold */
+ u32 fifo_threshold;
+
+ /* Optional standard touchscreen properties. */
+ u32 max_x;
+ u32 max_y;
+ u32 fuzz_x;
+ u32 fuzz_y;
+ bool invert_x;
+ bool invert_y;
+};
+
+struct iproc_ts_priv {
+ struct platform_device *pdev;
+ struct input_dev *idev;
+
+ void __iomem *regs;
+ struct clk *tsc_clk;
+
+ int pen_status;
+ struct tsc_param cfg_params;
+};
+
+/*
+ * Set default values the same as hardware reset values
+ * except for fifo_threshold with is set to 1.
+ */
+static const struct tsc_param iproc_default_config = {
+ .scanning_period = 0x5, /* 1 to 256 */
+ .debounce_timeout = 0x28, /* 0 to 255 */
+ .settling_timeout = 0x7, /* 0 to 11 */
+ .touch_timeout = 0xa, /* 0 to 255 */
+ .average_data = 5, /* entry 5 = 32 pts */
+ .fifo_threshold = 1, /* 0 to 31 */
+ .max_x = X_MAX,
+ .max_y = Y_MAX,
+};
+
+static void ts_reg_dump(struct iproc_ts_priv *priv)
+{
+ struct device *dev = &priv->pdev->dev;
+
+ dbg_reg(dev, priv, REGCTL1);
+ dbg_reg(dev, priv, REGCTL2);
+ dbg_reg(dev, priv, INTERRUPT_THRES);
+ dbg_reg(dev, priv, INTERRUPT_MASK);
+ dbg_reg(dev, priv, INTERRUPT_STATUS);
+ dbg_reg(dev, priv, CONTROLLER_STATUS);
+ dbg_reg(dev, priv, FIFO_DATA);
+ dbg_reg(dev, priv, ANALOG_CONTROL);
+ dbg_reg(dev, priv, AUX_DATA);
+ dbg_reg(dev, priv, DEBOUNCE_CNTR_STAT);
+ dbg_reg(dev, priv, SCAN_CNTR_STAT);
+ dbg_reg(dev, priv, REM_CNTR_STAT);
+ dbg_reg(dev, priv, SETTLING_TIMER_STAT);
+ dbg_reg(dev, priv, SPARE_REG);
+ dbg_reg(dev, priv, SOFT_BYPASS_CONTROL);
+ dbg_reg(dev, priv, SOFT_BYPASS_DATA);
+}
+
+static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct iproc_ts_priv *priv = platform_get_drvdata(pdev);
+ u32 intr_status;
+ u32 raw_coordinate;
+ u16 x;
+ u16 y;
+ int i;
+ bool needs_sync = false;
+
+ intr_status = readl(priv->regs + INTERRUPT_STATUS);
+ intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+ if (intr_status == 0)
+ return IRQ_NONE;
+
+ /* Clear all interrupt status bits, write-1-clear */
+ writel(intr_status, priv->regs + INTERRUPT_STATUS);
+
+ /* Pen up/down */
+ if (intr_status & TS_PEN_INTR_MASK) {
+ if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN)
+ priv->pen_status = PEN_DOWN_STATUS;
+ else
+ priv->pen_status = PEN_UP_STATUS;
+
+ input_report_key(priv->idev, BTN_TOUCH, priv->pen_status);
+ needs_sync = true;
+
+ dev_dbg(&priv->pdev->dev,
+ "pen up-down (%d)\n", priv->pen_status);
+ }
+
+ /* coordinates in FIFO exceed the theshold */
+ if (intr_status & TS_FIFO_INTR_MASK) {
+ for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
+ raw_coordinate = readl(priv->regs + FIFO_DATA);
+ if (raw_coordinate == INVALID_COORD)
+ continue;
+
+ /*
+ * The x and y coordinate are 16 bits each
+ * with the x in the lower 16 bits and y in the
+ * upper 16 bits.
+ */
+ x = (raw_coordinate >> X_COORD_SHIFT) &
+ FIFO_DATA_X_Y_MASK;
+ y = (raw_coordinate >> Y_COORD_SHIFT) &
+ FIFO_DATA_X_Y_MASK;
+
+ /* We only want to retain the 12 msb of the 16 */
+ x = (x >> 4) & 0x0FFF;
+ y = (y >> 4) & 0x0FFF;
+
+ /* adjust x y according to lcd tsc mount angle */
+ if (priv->cfg_params.invert_x)
+ x = priv->cfg_params.max_x - x;
+
+ if (priv->cfg_params.invert_y)
+ y = priv->cfg_params.max_y - y;
+
+ input_report_abs(priv->idev, ABS_X, x);
+ input_report_abs(priv->idev, ABS_Y, y);
+ needs_sync = true;
+
+ dev_dbg(&priv->pdev->dev, "xy (0x%x 0x%x)\n", x, y);
+ }
+ }
+
+ if (needs_sync)
+ input_sync(priv->idev);
+
+ return IRQ_HANDLED;
+}
+
+static int iproc_ts_start(struct input_dev *idev)
+{
+ struct iproc_ts_priv *priv = input_get_drvdata(idev);
+ u32 val;
+ int error;
+
+ /* Enable clock */
+ error = clk_prepare_enable(priv->tsc_clk);
+ if (error) {
+ dev_err(&priv->pdev->dev, "%s clk_prepare_enable failed %d\n",
+ __func__, error);
+ return error;
+ }
+
+ /*
+ * Interrupt is generated when:
+ * FIFO reaches the int_th value, and pen event(up/down)
+ */
+ val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+ writel(val, priv->regs + INTERRUPT_MASK);
+
+ writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES);
+
+ /* Initialize control reg1 */
+ val = 0;
+ val |= priv->cfg_params.scanning_period << SCANNING_PERIOD_SHIFT;
+ val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT;
+ val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT;
+ val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT;
+ writel(val, priv->regs + REGCTL1);
+
+ /* Try to clear all interrupt status */
+ val = readl(priv->regs + INTERRUPT_STATUS);
+ val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
+ writel(val, priv->regs + INTERRUPT_STATUS);
+
+ /* Initialize control reg2 */
+ val = readl(priv->regs + REGCTL2);
+ val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
+
+ val &= ~TS_CONTROLLER_AVGDATA_MASK;
+ val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT;
+
+ val &= ~(TS_CONTROLLER_PWR_LDO | /* PWR up LDO */
+ TS_CONTROLLER_PWR_ADC | /* PWR up ADC */
+ TS_CONTROLLER_PWR_BGP | /* PWR up BGP */
+ TS_CONTROLLER_PWR_TS); /* PWR up TS */
+
+ writel(val, priv->regs + REGCTL2);
+
+ ts_reg_dump(priv);
+
+ return 0;
+}
+
+static void iproc_ts_stop(struct input_dev *dev)
+{
+ u32 val;
+ struct iproc_ts_priv *priv = input_get_drvdata(dev);
+
+ writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */
+
+ /* Only power down touch screen controller */
+ val = readl(priv->regs + REGCTL2);
+ val |= TS_CONTROLLER_PWR_TS;
+ writel(val, priv->regs + REGCTL2);
+
+ clk_disable(priv->tsc_clk);
+}
+
+static int iproc_get_tsc_config(struct device *dev, struct iproc_ts_priv *priv)
+{
+ struct device_node *np = dev->of_node;
+ u32 val;
+
+ priv->cfg_params = iproc_default_config;
+
+ if (!np)
+ return 0;
+
+ if (of_property_read_u32(np, "scanning_period", &val) >= 0) {
+ if (val < 1 || val > 256) {
+ dev_err(dev, "scanning_period (%u) must be [1-256]\n",
+ val);
+ return -EINVAL;
+ }
+ priv->cfg_params.scanning_period = val;
+ }
+
+ if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
+ if (val > 255) {
+ dev_err(dev, "debounce_timeout (%u) must be [0-255]\n",
+ val);
+ return -EINVAL;
+ }
+ priv->cfg_params.debounce_timeout = val;
+ }
+
+ if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
+ if (val > 11) {
+ dev_err(dev, "settling_timeout (%u) must be [0-11]\n",
+ val);
+ return -EINVAL;
+ }
+ priv->cfg_params.settling_timeout = val;
+ }
+
+ if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
+ if (val > 255) {
+ dev_err(dev, "touch_timeout (%u) must be [0-255]\n",
+ val);
+ return -EINVAL;
+ }
+ priv->cfg_params.touch_timeout = val;
+ }
+
+ if (of_property_read_u32(np, "average_data", &val) >= 0) {
+ if (val > 8) {
+ dev_err(dev, "average_data (%u) must be [0-8]\n", val);
+ return -EINVAL;
+ }
+ priv->cfg_params.average_data = val;
+ }
+
+ if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
+ if (val > 31) {
+ dev_err(dev, "fifo_threshold (%u)) must be [0-31]\n",
+ val);
+ return -EINVAL;
+ }
+ priv->cfg_params.fifo_threshold = val;
+ }
+
+ /* Parse optional properties. */
+ of_property_read_u32(np, "touchscreen-size-x", &priv->cfg_params.max_x);
+ of_property_read_u32(np, "touchscreen-size-y", &priv->cfg_params.max_y);
+
+ of_property_read_u32(np, "touchscreen-fuzz-x",
+ &priv->cfg_params.fuzz_x);
+ of_property_read_u32(np, "touchscreen-fuzz-y",
+ &priv->cfg_params.fuzz_y);
+
+ priv->cfg_params.invert_x =
+ of_property_read_bool(np, "touchscreen-inverted-x");
+ priv->cfg_params.invert_y =
+ of_property_read_bool(np, "touchscreen-inverted-y");
+
+ return 0;
+}
+
+static int iproc_ts_probe(struct platform_device *pdev)
+{
+ struct iproc_ts_priv *priv;
+ struct input_dev *idev;
+ struct resource *res;
+ int irq;
+ int error;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ /* touchscreen controller memory mapped regs */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->regs)) {
+ error = PTR_ERR(priv->regs);
+ dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error);
+ return error;
+ }
+
+ priv->tsc_clk = devm_clk_get(&pdev->dev, "tsc_clk");
+ if (IS_ERR(priv->tsc_clk)) {
+ error = PTR_ERR(priv->tsc_clk);
+ dev_err(&pdev->dev,
+ "failed getting clock tsc_clk: %d\n", error);
+ return error;
+ }
+
+ priv->pdev = pdev;
+ error = iproc_get_tsc_config(&pdev->dev, priv);
+ if (error) {
+ dev_err(&pdev->dev, "get_tsc_config failed: %d\n", error);
+ return error;
+ }
+
+ idev = devm_input_allocate_device(&pdev->dev);
+ if (!idev) {
+ dev_err(&pdev->dev, "failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ priv->idev = idev;
+ priv->pen_status = PEN_UP_STATUS;
+
+ /* Set input device info */
+ idev->name = IPROC_TS_NAME;
+ idev->dev.parent = &pdev->dev;
+
+ idev->id.bustype = BUS_HOST;
+ idev->id.vendor = SERIO_UNKNOWN;
+ idev->id.product = 0;
+ idev->id.version = 0;
+
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ __set_bit(BTN_TOUCH, idev->keybit);
+
+ input_set_abs_params(idev, ABS_X, X_MIN, priv->cfg_params.max_x,
+ priv->cfg_params.fuzz_x, 0);
+ input_set_abs_params(idev, ABS_Y, Y_MIN, priv->cfg_params.max_y,
+ priv->cfg_params.fuzz_y, 0);
+
+ idev->open = iproc_ts_start;
+ idev->close = iproc_ts_stop;
+
+ input_set_drvdata(idev, priv);
+ platform_set_drvdata(pdev, priv);
+
+ /* get interrupt */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "platform_get_irq failed: %d\n", irq);
+ return irq;
+ }
+
+ error = devm_request_irq(&pdev->dev, irq,
+ iproc_touchscreen_interrupt,
+ IRQF_SHARED, IPROC_TS_NAME, pdev);
+ if (error)
+ return error;
+
+ error = input_register_device(priv->idev);
+ if (error) {
+ dev_err(&pdev->dev,
+ "failed to register input device: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id iproc_ts_of_match[] = {
+ {.compatible = "brcm,iproc-touchscreen", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, iproc_ts_of_match);
+
+static struct platform_driver iproc_ts_driver = {
+ .probe = iproc_ts_probe,
+ .driver = {
+ .name = IPROC_TS_NAME,
+ .of_match_table = of_match_ptr(iproc_ts_of_match),
+ },
+};
+
+module_platform_driver(iproc_ts_driver);
+
+MODULE_DESCRIPTION("IPROC Touchscreen driver");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * Driver for ChipOne icn8318 i2c touchscreen controller
+ *
+ * Copyright (c) 2015 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define ICN8318_REG_POWER 4
+#define ICN8318_REG_TOUCHDATA 16
+
+#define ICN8318_POWER_ACTIVE 0
+#define ICN8318_POWER_MONITOR 1
+#define ICN8318_POWER_HIBERNATE 2
+
+#define ICN8318_MAX_TOUCHES 5
+
+struct icn8318_touch {
+ __u8 slot;
+ __be16 x;
+ __be16 y;
+ __u8 pressure; /* Seems more like finger width then pressure really */
+ __u8 event;
+/* The difference between 2 and 3 is unclear */
+#define ICN8318_EVENT_NO_DATA 1 /* No finger seen yet since wakeup */
+#define ICN8318_EVENT_UPDATE1 2 /* New or updated coordinates */
+#define ICN8318_EVENT_UPDATE2 3 /* New or updated coordinates */
+#define ICN8318_EVENT_END 4 /* Finger lifted */
+} __packed;
+
+struct icn8318_touch_data {
+ __u8 softbutton;
+ __u8 touch_count;
+ struct icn8318_touch touches[ICN8318_MAX_TOUCHES];
+} __packed;
+
+struct icn8318_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct gpio_desc *wake_gpio;
+ u32 max_x;
+ u32 max_y;
+ bool invert_x;
+ bool invert_y;
+ bool swap_x_y;
+};
+
+static int icn8318_read_touch_data(struct i2c_client *client,
+ struct icn8318_touch_data *touch_data)
+{
+ u8 reg = ICN8318_REG_TOUCHDATA;
+ struct i2c_msg msg[2] = {
+ {
+ .addr = client->addr,
+ .len = 1,
+ .buf = ®
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = sizeof(struct icn8318_touch_data),
+ .buf = (u8 *)touch_data
+ }
+ };
+
+ return i2c_transfer(client->adapter, msg, 2);
+}
+
+static inline bool icn8318_touch_active(u8 event)
+{
+ return (event == ICN8318_EVENT_UPDATE1) ||
+ (event == ICN8318_EVENT_UPDATE2);
+}
+
+static irqreturn_t icn8318_irq(int irq, void *dev_id)
+{
+ struct icn8318_data *data = dev_id;
+ struct device *dev = &data->client->dev;
+ struct icn8318_touch_data touch_data;
+ int i, ret, x, y;
+
+ ret = icn8318_read_touch_data(data->client, &touch_data);
+ if (ret < 0) {
+ dev_err(dev, "Error reading touch data: %d\n", ret);
+ return IRQ_HANDLED;
+ }
+
+ if (touch_data.softbutton) {
+ /*
+ * Other data is invalid when a softbutton is pressed.
+ * This needs some extra devicetree bindings to map the icn8318
+ * softbutton codes to evdev codes. Currently no known devices
+ * use this.
+ */
+ return IRQ_HANDLED;
+ }
+
+ if (touch_data.touch_count > ICN8318_MAX_TOUCHES) {
+ dev_warn(dev, "Too much touches %d > %d\n",
+ touch_data.touch_count, ICN8318_MAX_TOUCHES);
+ touch_data.touch_count = ICN8318_MAX_TOUCHES;
+ }
+
+ for (i = 0; i < touch_data.touch_count; i++) {
+ struct icn8318_touch *touch = &touch_data.touches[i];
+ bool act = icn8318_touch_active(touch->event);
+
+ input_mt_slot(data->input, touch->slot);
+ input_mt_report_slot_state(data->input, MT_TOOL_FINGER, act);
+ if (!act)
+ continue;
+
+ x = be16_to_cpu(touch->x);
+ y = be16_to_cpu(touch->y);
+
+ if (data->invert_x)
+ x = data->max_x - x;
+
+ if (data->invert_y)
+ y = data->max_y - y;
+
+ if (!data->swap_x_y) {
+ input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+ input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
+ } else {
+ input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
+ input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
+ }
+ }
+
+ input_mt_sync_frame(data->input);
+ input_sync(data->input);
+
+ return IRQ_HANDLED;
+}
+
+static int icn8318_start(struct input_dev *dev)
+{
+ struct icn8318_data *data = input_get_drvdata(dev);
+
+ enable_irq(data->client->irq);
+ gpiod_set_value_cansleep(data->wake_gpio, 1);
+
+ return 0;
+}
+
+static void icn8318_stop(struct input_dev *dev)
+{
+ struct icn8318_data *data = input_get_drvdata(dev);
+
+ disable_irq(data->client->irq);
+ i2c_smbus_write_byte_data(data->client, ICN8318_REG_POWER,
+ ICN8318_POWER_HIBERNATE);
+ gpiod_set_value_cansleep(data->wake_gpio, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int icn8318_suspend(struct device *dev)
+{
+ struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+ mutex_lock(&data->input->mutex);
+ if (data->input->users)
+ icn8318_stop(data->input);
+ mutex_unlock(&data->input->mutex);
+
+ return 0;
+}
+
+static int icn8318_resume(struct device *dev)
+{
+ struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+ mutex_lock(&data->input->mutex);
+ if (data->input->users)
+ icn8318_start(data->input);
+ mutex_unlock(&data->input->mutex);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(icn8318_pm_ops, icn8318_suspend, icn8318_resume);
+
+static int icn8318_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device_node *np = dev->of_node;
+ struct icn8318_data *data;
+ struct input_dev *input;
+ u32 fuzz_x = 0, fuzz_y = 0;
+ int error;
+
+ if (!client->irq) {
+ dev_err(dev, "Error no irq specified\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW);
+ if (IS_ERR(data->wake_gpio)) {
+ error = PTR_ERR(data->wake_gpio);
+ if (error != -EPROBE_DEFER)
+ dev_err(dev, "Error getting wake gpio: %d\n", error);
+ return error;
+ }
+
+ if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
+ of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
+ dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+ return -EINVAL;
+ }
+
+ /* Optional */
+ of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
+ of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
+ data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
+ data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
+ data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+
+ input->name = client->name;
+ input->id.bustype = BUS_I2C;
+ input->open = icn8318_start;
+ input->close = icn8318_stop;
+ input->dev.parent = dev;
+
+ if (!data->swap_x_y) {
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+ data->max_x, fuzz_x, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+ data->max_y, fuzz_y, 0);
+ } else {
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+ data->max_y, fuzz_y, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+ data->max_x, fuzz_x, 0);
+ }
+
+ error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error)
+ return error;
+
+ data->client = client;
+ data->input = input;
+ input_set_drvdata(input, data);
+
+ error = devm_request_threaded_irq(dev, client->irq, NULL, icn8318_irq,
+ IRQF_ONESHOT, client->name, data);
+ if (error) {
+ dev_err(dev, "Error requesting irq: %d\n", error);
+ return error;
+ }
+
+ /* Stop device till opened */
+ icn8318_stop(data->input);
+
+ error = input_register_device(input);
+ if (error)
+ return error;
+
+ i2c_set_clientdata(client, data);
+
+ return 0;
+}
+
+static const struct of_device_id icn8318_of_match[] = {
+ { .compatible = "chipone,icn8318" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, icn8318_of_match);
+
+/* This is useless for OF-enabled devices, but it is needed by I2C subsystem */
+static const struct i2c_device_id icn8318_i2c_id[] = {
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, icn8318_i2c_id);
+
+static struct i2c_driver icn8318_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "chipone_icn8318",
+ .pm = &icn8318_pm_ops,
+ .of_match_table = icn8318_of_match,
+ },
+ .probe = icn8318_probe,
+ .id_table = icn8318_i2c_id,
+};
+
+module_i2c_driver(icn8318_driver);
+
+MODULE_DESCRIPTION("ChipOne icn8318 I2C Touchscreen Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
#include <linux/input/edt-ft5x06.h>
#define MAX_SUPPORT_POINTS 5
input->id.bustype = BUS_I2C;
input->dev.parent = &client->dev;
- __set_bit(EV_SYN, input->evbit);
__set_bit(EV_KEY, input->evbit);
__set_bit(EV_ABS, input->evbit);
__set_bit(BTN_TOUCH, input->keybit);
0, tsdata->num_x * 64 - 1, 0, 0);
input_set_abs_params(input, ABS_MT_POSITION_Y,
0, tsdata->num_y * 64 - 1, 0, 0);
+
+ if (!pdata)
+ touchscreen_parse_of_params(input);
+
error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
if (error) {
dev_err(&client->dev, "Unable to init MT slots.\n");
#define MAX_FW_UPDATE_RETRIES 30
#define ELAN_FW_PAGESIZE 132
-#define ELAN_FW_FILENAME "elants_i2c.bin"
/* calibration timeout definition */
#define ELAN_CALI_TIMEOUT_MSEC 10000
{
struct i2c_client *client = ts->client;
const struct firmware *fw;
+ char *fw_name;
int error;
- error = request_firmware(&fw, ELAN_FW_FILENAME, &client->dev);
+ fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%4x.bin", ts->hw_version);
+ if (!fw_name)
+ return -ENOMEM;
+
+ dev_info(&client->dev, "requesting fw name = %s\n", fw_name);
+ error = request_firmware(&fw, fw_name, &client->dev);
+ kfree(fw_name);
if (error) {
- dev_err(&client->dev, "failed to request firmware %s: %d\n",
- ELAN_FW_FILENAME, error);
+ dev_err(&client->dev, "failed to request firmware: %d\n",
+ error);
return error;
}
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
#include <asm/unaligned.h>
struct goodix_ts_data {
#define GOODIX_REG_VERSION 0x8140
#define RESOLUTION_LOC 1
+#define MAX_CONTACTS_LOC 5
#define TRIGGER_LOC 6
static const unsigned long goodix_irq_flags[] = {
}
touch_num = data[0] & 0x0f;
- if (touch_num > GOODIX_MAX_CONTACTS)
+ if (touch_num > ts->max_touch_num)
return -EPROTO;
if (touch_num > 1) {
*/
static void goodix_process_events(struct goodix_ts_data *ts)
{
- u8 point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+ u8 point_data[1 + GOODIX_CONTACT_SIZE * ts->max_touch_num];
int touch_num;
int i;
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
ts->int_trigger_type = GOODIX_INT_TRIGGER;
+ ts->max_touch_num = GOODIX_MAX_CONTACTS;
return;
}
ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
- ts->int_trigger_type = (config[TRIGGER_LOC]) & 0x03;
- if (!ts->abs_x_max || !ts->abs_y_max) {
+ ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
+ ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+ if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
dev_err(&ts->client->dev,
"Invalid config, using defaults\n");
ts->abs_x_max = GOODIX_MAX_WIDTH;
ts->abs_y_max = GOODIX_MAX_HEIGHT;
+ ts->max_touch_num = GOODIX_MAX_CONTACTS;
}
}
-
/**
* goodix_read_version - Read goodix touchscreen version
*
input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
- input_mt_init_slots(ts->input_dev, GOODIX_MAX_CONTACTS,
+ input_mt_init_slots(ts->input_dev, ts->max_touch_num,
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
ts->input_dev->name = "Goodix Capacitive TouchScreen";
{ }
};
+#ifdef CONFIG_ACPI
static const struct acpi_device_id goodix_acpi_match[] = {
{ "GDIX1001", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id goodix_of_match[] = {
+ { .compatible = "goodix,gt911" },
+ { .compatible = "goodix,gt9110" },
+ { .compatible = "goodix,gt912" },
+ { .compatible = "goodix,gt927" },
+ { .compatible = "goodix,gt9271" },
+ { .compatible = "goodix,gt928" },
+ { .compatible = "goodix,gt967" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, goodix_of_match);
+#endif
static struct i2c_driver goodix_ts_driver = {
.probe = goodix_ts_probe,
.driver = {
.name = "Goodix-TS",
.owner = THIS_MODULE,
- .acpi_match_table = goodix_acpi_match,
+ .acpi_match_table = ACPI_PTR(goodix_acpi_match),
+ .of_match_table = of_match_ptr(goodix_of_match),
},
};
module_i2c_driver(goodix_ts_driver);
#include <linux/of.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
+static u32 of_get_optional_u32(struct device_node *np,
+ const char *property)
+{
+ u32 val = 0;
+
+ of_property_read_u32(np, property, &val);
+
+ return val;
+}
+
+static void touchscreen_set_params(struct input_dev *dev,
+ unsigned long axis,
+ int max, int fuzz)
+{
+ struct input_absinfo *absinfo;
+
+ if (!test_bit(axis, dev->absbit)) {
+ /*
+ * Emit a warning only if the axis is not a multitouch
+ * axis, which might not be set by the driver.
+ */
+ if (!input_is_mt_axis(axis))
+ dev_warn(&dev->dev,
+ "DT specifies parameters but the axis is not set up\n");
+ return;
+ }
+
+ absinfo = &dev->absinfo[axis];
+ absinfo->maximum = max;
+ absinfo->fuzz = fuzz;
+}
+
/**
* touchscreen_parse_of_params - parse common touchscreen DT properties
* @dev: device that should be parsed
void touchscreen_parse_of_params(struct input_dev *dev)
{
struct device_node *np = dev->dev.parent->of_node;
- struct input_absinfo *absinfo;
+ u32 maximum, fuzz;
input_alloc_absinfo(dev);
if (!dev->absinfo)
return;
- absinfo = &dev->absinfo[ABS_X];
- of_property_read_u32(np, "touchscreen-size-x", &absinfo->maximum);
- of_property_read_u32(np, "touchscreen-fuzz-x", &absinfo->fuzz);
+ maximum = of_get_optional_u32(np, "touchscreen-size-x");
+ fuzz = of_get_optional_u32(np, "touchscreen-fuzz-x");
+ if (maximum || fuzz) {
+ touchscreen_set_params(dev, ABS_X, maximum, fuzz);
+ touchscreen_set_params(dev, ABS_MT_POSITION_X, maximum, fuzz);
+ }
- absinfo = &dev->absinfo[ABS_Y];
- of_property_read_u32(np, "touchscreen-size-y", &absinfo->maximum);
- of_property_read_u32(np, "touchscreen-fuzz-y", &absinfo->fuzz);
+ maximum = of_get_optional_u32(np, "touchscreen-size-y");
+ fuzz = of_get_optional_u32(np, "touchscreen-fuzz-y");
+ if (maximum || fuzz) {
+ touchscreen_set_params(dev, ABS_Y, maximum, fuzz);
+ touchscreen_set_params(dev, ABS_MT_POSITION_Y, maximum, fuzz);
+ }
- absinfo = &dev->absinfo[ABS_PRESSURE];
- of_property_read_u32(np, "touchscreen-max-pressure", &absinfo->maximum);
- of_property_read_u32(np, "touchscreen-fuzz-pressure", &absinfo->fuzz);
+ maximum = of_get_optional_u32(np, "touchscreen-max-pressure");
+ fuzz = of_get_optional_u32(np, "touchscreen-fuzz-pressure");
+ if (maximum || fuzz) {
+ touchscreen_set_params(dev, ABS_PRESSURE, maximum, fuzz);
+ touchscreen_set_params(dev, ABS_MT_PRESSURE, maximum, fuzz);
+ }
}
EXPORT_SYMBOL(touchscreen_parse_of_params);
* These kinds of heuristics are just asking for trouble (and don't belong
* in the kernel). So this driver offers straight forward, reliable single
* touch functionality only.
+ *
+ * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README)
+ * (looks like the description in the A20 User Manual v1.3 is better
+ * than the one in the A10 User Manual v.1.5)
*/
#include <linux/err.h>
if (ts->temp_data == -1)
return -EAGAIN;
- *temp = (ts->temp_data - ts->temp_offset) * ts->temp_step;
+ *temp = ts->temp_data * ts->temp_step - ts->temp_offset;
return 0;
}
int error;
u32 reg;
bool ts_attached;
+ u32 tp_sensitive_adjust = 15;
+ u32 filter_type = 1;
ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
if (!ts)
ts->ignore_fifo_data = true;
ts->temp_data = -1;
if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) {
- /* Allwinner SDK has temperature = -271 + (value / 6) (C) */
- ts->temp_offset = 1626;
+ /* Allwinner SDK has temperature (C) = (value / 6) - 271 */
+ ts->temp_offset = 271000;
ts->temp_step = 167;
+ } else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) {
+ /*
+ * The A10 temperature sensor has quite a wide spread, these
+ * parameters are based on the averaging of the calibration
+ * results of 4 completely different boards, with a spread of
+ * temp_step from 0.096 - 0.170 and temp_offset from 176 - 331.
+ */
+ ts->temp_offset = 257000;
+ ts->temp_step = 133;
} else {
/*
* The user manuals do not contain the formula for calculating
* the temperature. The formula used here is from the AXP209,
* which is designed by X-Powers, an affiliate of Allwinner:
*
- * temperature = -144.7 + (value * 0.1)
+ * temperature (C) = (value * 0.1) - 144.7
*
* Allwinner does not have any documentation whatsoever for
* this hardware. Moreover, it is claimed that the sensor
* is inaccurate and cannot work properly.
*/
- ts->temp_offset = 1447;
+ ts->temp_offset = 144700;
ts->temp_step = 100;
}
ts->base + TP_CTRL0);
/*
- * sensitive_adjust = 15 : max, which is not all that sensitive,
+ * tp_sensitive_adjust is an optional property
* tp_mode = 0 : only x and y coordinates, as we don't use dual touch
*/
- writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0),
+ of_property_read_u32(np, "allwinner,tp-sensitive-adjust",
+ &tp_sensitive_adjust);
+ writel(TP_SENSITIVE_ADJUST(tp_sensitive_adjust) | TP_MODE_SELECT(0),
ts->base + TP_CTRL2);
- /* Enable median filter, type 1 : 5/3 */
- writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3);
+ /*
+ * Enable median and averaging filter, optional property for
+ * filter type.
+ */
+ of_property_read_u32(np, "allwinner,filter-type", &filter_type);
+ writel(FILTER_EN(1) | FILTER_TYPE(filter_type), ts->base + TP_CTRL3);
/* Enable temperature measurement, period 1953 (2 seconds) */
writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
* finally enable tp mode.
*/
reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1);
- if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts"))
- reg |= TP_MODE_EN(1);
- else
+ if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts"))
reg |= SUN6I_TP_MODE_EN(1);
+ else
+ reg |= TP_MODE_EN(1);
writel(reg, ts->base + TP_CTRL1);
/*
static const struct of_device_id sun4i_ts_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-ts", },
+ { .compatible = "allwinner,sun5i-a13-ts", },
{ .compatible = "allwinner,sun6i-a31-ts", },
{ /* sentinel */ }
};
--- /dev/null
+/*
+ * Driver for Semtech SX8654 I2C touchscreen controller.
+ *
+ * Copyright (c) 2015 Armadeus Systems
+ * Sébastien Szymanski <sebastien.szymanski@armadeus.com>
+ *
+ * Using code from:
+ * - sx865x.c
+ * Copyright (c) 2013 U-MoBo Srl
+ * Pierluigi Passaro <p.passaro@u-mobo.com>
+ * - sx8650.c
+ * Copyright (c) 2009 Wayne Roberts
+ * - tsc2007.c
+ * Copyright (c) 2008 Kwangwoo Lee
+ * - ads7846.c
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * - corgi_ts.c
+ * Copyright (C) 2004-2005 Richard Purdie
+ * - omap_ts.[hc], ads7846.h, ts_osk.c
+ * Copyright (C) 2002 MontaVista Software
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2005 Dirk Behme
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+/* register addresses */
+#define I2C_REG_TOUCH0 0x00
+#define I2C_REG_TOUCH1 0x01
+#define I2C_REG_CHANMASK 0x04
+#define I2C_REG_IRQMASK 0x22
+#define I2C_REG_IRQSRC 0x23
+#define I2C_REG_SOFTRESET 0x3f
+
+/* commands */
+#define CMD_READ_REGISTER 0x40
+#define CMD_MANUAL 0xc0
+#define CMD_PENTRG 0xe0
+
+/* value for I2C_REG_SOFTRESET */
+#define SOFTRESET_VALUE 0xde
+
+/* bits for I2C_REG_IRQSRC */
+#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08
+#define IRQ_PENRELEASE 0x04
+
+/* bits for RegTouch1 */
+#define CONDIRQ 0x20
+#define FILT_7SA 0x03
+
+/* bits for I2C_REG_CHANMASK */
+#define CONV_X 0x80
+#define CONV_Y 0x40
+
+/* coordinates rate: higher nibble of CTRL0 register */
+#define RATE_MANUAL 0x00
+#define RATE_5000CPS 0xf0
+
+/* power delay: lower nibble of CTRL0 register */
+#define POWDLY_1_1MS 0x0b
+
+#define MAX_12BIT ((1 << 12) - 1)
+
+struct sx8654 {
+ struct input_dev *input;
+ struct i2c_client *client;
+};
+
+static irqreturn_t sx8654_irq(int irq, void *handle)
+{
+ struct sx8654 *sx8654 = handle;
+ int irqsrc;
+ u8 data[4];
+ unsigned int x, y;
+ int retval;
+
+ irqsrc = i2c_smbus_read_byte_data(sx8654->client,
+ CMD_READ_REGISTER | I2C_REG_IRQSRC);
+ dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
+
+ if (irqsrc < 0)
+ goto out;
+
+ if (irqsrc & IRQ_PENRELEASE) {
+ dev_dbg(&sx8654->client->dev, "pen release interrupt");
+
+ input_report_key(sx8654->input, BTN_TOUCH, 0);
+ input_sync(sx8654->input);
+ }
+
+ if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
+ dev_dbg(&sx8654->client->dev, "pen touch interrupt");
+
+ retval = i2c_master_recv(sx8654->client, data, sizeof(data));
+ if (retval != sizeof(data))
+ goto out;
+
+ /* invalid data */
+ if (unlikely(data[0] & 0x80 || data[2] & 0x80))
+ goto out;
+
+ x = ((data[0] & 0xf) << 8) | (data[1]);
+ y = ((data[2] & 0xf) << 8) | (data[3]);
+
+ input_report_abs(sx8654->input, ABS_X, x);
+ input_report_abs(sx8654->input, ABS_Y, y);
+ input_report_key(sx8654->input, BTN_TOUCH, 1);
+ input_sync(sx8654->input);
+
+ dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int sx8654_open(struct input_dev *dev)
+{
+ struct sx8654 *sx8654 = input_get_drvdata(dev);
+ struct i2c_client *client = sx8654->client;
+ int error;
+
+ /* enable pen trigger mode */
+ error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
+ RATE_5000CPS | POWDLY_1_1MS);
+ if (error) {
+ dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+ return error;
+ }
+
+ error = i2c_smbus_write_byte(client, CMD_PENTRG);
+ if (error) {
+ dev_err(&client->dev, "writing command CMD_PENTRG failed");
+ return error;
+ }
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static void sx8654_close(struct input_dev *dev)
+{
+ struct sx8654 *sx8654 = input_get_drvdata(dev);
+ struct i2c_client *client = sx8654->client;
+ int error;
+
+ disable_irq(client->irq);
+
+ /* enable manual mode mode */
+ error = i2c_smbus_write_byte(client, CMD_MANUAL);
+ if (error) {
+ dev_err(&client->dev, "writing command CMD_MANUAL failed");
+ return;
+ }
+
+ error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+ if (error) {
+ dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+ return;
+ }
+}
+
+static int sx8654_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sx8654 *sx8654;
+ struct input_dev *input;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_WORD_DATA))
+ return -ENXIO;
+
+ sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
+ if (!sx8654)
+ return -ENOMEM;
+
+ input = devm_input_allocate_device(&client->dev);
+ if (!sx8654)
+ return -ENOMEM;
+
+ input->name = "SX8654 I2C Touchscreen";
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = &client->dev;
+ input->open = sx8654_open;
+ input->close = sx8654_close;
+
+ __set_bit(INPUT_PROP_DIRECT, input->propbit);
+ input_set_capability(input, EV_KEY, BTN_TOUCH);
+ input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
+
+ sx8654->client = client;
+ sx8654->input = input;
+
+ input_set_drvdata(sx8654->input, sx8654);
+
+ error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
+ SOFTRESET_VALUE);
+ if (error) {
+ dev_err(&client->dev, "writing softreset value failed");
+ return error;
+ }
+
+ error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
+ CONV_X | CONV_Y);
+ if (error) {
+ dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
+ return error;
+ }
+
+ error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
+ IRQ_PENTOUCH_TOUCHCONVDONE |
+ IRQ_PENRELEASE);
+ if (error) {
+ dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
+ return error;
+ }
+
+ error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
+ CONDIRQ | FILT_7SA);
+ if (error) {
+ dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
+ return error;
+ }
+
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, sx8654_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ client->name, sx8654);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to enable IRQ %d, error: %d\n",
+ client->irq, error);
+ return error;
+ }
+
+ /* Disable the IRQ, we'll enable it in sx8654_open() */
+ disable_irq(client->irq);
+
+ error = input_register_device(sx8654->input);
+ if (error)
+ return error;
+
+ i2c_set_clientdata(client, sx8654);
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sx8654_of_match[] = {
+ { .compatible = "semtech,sx8654", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sx8654_of_match);
+#endif
+
+static const struct i2c_device_id sx8654_id_table[] = {
+ { "semtech_sx8654", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
+
+static struct i2c_driver sx8654_driver = {
+ .driver = {
+ .name = "sx8654",
+ .of_match_table = of_match_ptr(sx8654_of_match),
+ },
+ .id_table = sx8654_id_table,
+ .probe = sx8654_probe,
+};
+module_i2c_driver(sx8654_driver);
+
+MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>");
+MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
u16 model;
u16 x_plate_ohms;
u16 max_rt;
- unsigned long poll_period;
+ unsigned long poll_period; /* in jiffies */
int fuzzx;
int fuzzy;
int fuzzz;
dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
}
- wait_event_timeout(ts->wait, ts->stopped,
- msecs_to_jiffies(ts->poll_period));
+ wait_event_timeout(ts->wait, ts->stopped, ts->poll_period);
}
dev_dbg(&ts->client->dev, "UP\n");
ts->fuzzz = val32;
if (!of_property_read_u64(np, "ti,poll-period", &val64))
- ts->poll_period = val64;
+ ts->poll_period = msecs_to_jiffies(val64);
else
- ts->poll_period = 1;
+ ts->poll_period = msecs_to_jiffies(1);
if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
ts->x_plate_ohms = val32;
ts->model = pdata->model;
ts->x_plate_ohms = pdata->x_plate_ohms;
ts->max_rt = pdata->max_rt ? : MAX_12BIT;
- ts->poll_period = pdata->poll_period ? : 1;
+ ts->poll_period = msecs_to_jiffies(pdata->poll_period ? : 1);
ts->get_pendown_state = pdata->get_pendown_state;
ts->clear_penirq = pdata->clear_penirq;
ts->fuzzx = pdata->fuzzx;
DEVTYPE_GUNZE,
DEVTYPE_DMC_TSC10,
DEVTYPE_IRTOUCH,
+ DEVTYPE_IRTOUCH_HIRES,
DEVTYPE_IDEALTEK,
DEVTYPE_GENERAL_TOUCH,
DEVTYPE_GOTOP,
#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+ {USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
.rept_size = 8,
.read_data = irtouch_read_data,
},
+
+ [DEVTYPE_IRTOUCH_HIRES] = {
+ .min_xc = 0x0,
+ .max_xc = 0x7fff,
+ .min_yc = 0x0,
+ .max_yc = 0x7fff,
+ .rept_size = 8,
+ .read_data = irtouch_read_data,
+ },
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
KEY_RESERVED,
KEY_SCROLLDOWN,
KEY_SCROLLUP,
- KEY_DIRECTION,
+ KEY_ROTATE_DISPLAY,
KEY_LEFTCTRL,
KEY_BRIGHTNESSUP,
KEY_BRIGHTNESSDOWN,
KEY_RESERVED,
KEY_PROG1,
KEY_PROG2,
- KEY_DIRECTION,
+ KEY_ROTATE_DISPLAY,
KEY_RESERVED,
KEY_RESERVED,
KEY_RESERVED,
KEY_RESERVED,
KEY_RESERVED,
KEY_MAIL,
- KEY_DIRECTION,
+ KEY_ROTATE_DISPLAY,
KEY_ESC,
KEY_ENTER,
KEY_BRIGHTNESSUP,
{ KE_KEY, 0x20e8, { KEY_MEDIA } },
{ KE_KEY, 0x2142, { KEY_MEDIA } },
{ KE_KEY, 0x213b, { KEY_INFO } },
- { KE_KEY, 0x2169, { KEY_DIRECTION } },
+ { KE_KEY, 0x2169, { KEY_ROTATE_DISPLAY } },
{ KE_KEY, 0x216a, { KEY_SETUP } },
{ KE_KEY, 0x231b, { KEY_HELP } },
{ KE_END, 0 }
#define TC_KPD_DEBOUNCE_PERIOD 0xA3
#define TC_KPD_SETTLE_TIME 0xA3
-/**
- * struct tc35893_platform_data - data structure for platform specific data
- * @keymap_data: matrix scan code table for keycodes
- * @krow: mask for available rows, value is 0xFF
- * @kcol: mask for available columns, value is 0xFF
- * @debounce_period: platform specific debounce time
- * @settle_time: platform specific settle down time
- * @irqtype: type of interrupt, falling or rising edge
- * @enable_wakeup: specifies if keypad event can wake up system from sleep
- * @no_autorepeat: flag for auto repetition
- */
-struct tc3589x_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
- u8 krow;
- u8 kcol;
- u8 debounce_period;
- u8 settle_time;
- unsigned long irqtype;
- bool enable_wakeup;
- bool no_autorepeat;
-};
/**
* struct tc3589x_platform_data - TC3589x platform data
* @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
- * @keypad: keypad-specific platform data
*/
struct tc3589x_platform_data {
unsigned int block;
- const struct tc3589x_keypad_platform_data *keypad;
};
#endif
#define KEY_MSDOS 151
#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
#define KEY_SCREENLOCK KEY_COFFEE
-#define KEY_DIRECTION 153
+#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */
+#define KEY_DIRECTION KEY_ROTATE_DISPLAY
#define KEY_CYCLEWINDOWS 154
#define KEY_MAIL 155
#define KEY_BOOKMARKS 156 /* AC Bookmarks */
projects / karo-tx-linux.git / commitdiff