--- /dev/null
+/*
+ * STMicroelectronics magnetometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_magn.h"
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_MAGN_DEFAULT_OUT_X_L_ADDR 0X04
+#define ST_MAGN_DEFAULT_OUT_Y_L_ADDR 0X08
+#define ST_MAGN_DEFAULT_OUT_Z_L_ADDR 0X06
+
+/* FULLSCALE */
+#define ST_MAGN_FS_AVL_1300MG 1300
+#define ST_MAGN_FS_AVL_1900MG 1900
+#define ST_MAGN_FS_AVL_2500MG 2500
+#define ST_MAGN_FS_AVL_4000MG 4000
+#define ST_MAGN_FS_AVL_4700MG 4700
+#define ST_MAGN_FS_AVL_5600MG 5600
+#define ST_MAGN_FS_AVL_8000MG 8000
+#define ST_MAGN_FS_AVL_8100MG 8100
+#define ST_MAGN_FS_AVL_10000MG 10000
+
+/* CUSTOM VALUES FOR SENSOR 1 */
+#define ST_MAGN_1_WAI_EXP 0x3c
+#define ST_MAGN_1_ODR_ADDR 0x00
+#define ST_MAGN_1_ODR_MASK 0x1c
+#define ST_MAGN_1_ODR_AVL_1HZ_VAL 0x00
+#define ST_MAGN_1_ODR_AVL_2HZ_VAL 0x01
+#define ST_MAGN_1_ODR_AVL_3HZ_VAL 0x02
+#define ST_MAGN_1_ODR_AVL_8HZ_VAL 0x03
+#define ST_MAGN_1_ODR_AVL_15HZ_VAL 0x04
+#define ST_MAGN_1_ODR_AVL_30HZ_VAL 0x05
+#define ST_MAGN_1_ODR_AVL_75HZ_VAL 0x06
+#define ST_MAGN_1_ODR_AVL_220HZ_VAL 0x07
+#define ST_MAGN_1_PW_ADDR 0x02
+#define ST_MAGN_1_PW_MASK 0x03
+#define ST_MAGN_1_PW_ON 0x00
+#define ST_MAGN_1_PW_OFF 0x03
+#define ST_MAGN_1_FS_ADDR 0x01
+#define ST_MAGN_1_FS_MASK 0xe0
+#define ST_MAGN_1_FS_AVL_1300_VAL 0x01
+#define ST_MAGN_1_FS_AVL_1900_VAL 0x02
+#define ST_MAGN_1_FS_AVL_2500_VAL 0x03
+#define ST_MAGN_1_FS_AVL_4000_VAL 0x04
+#define ST_MAGN_1_FS_AVL_4700_VAL 0x05
+#define ST_MAGN_1_FS_AVL_5600_VAL 0x06
+#define ST_MAGN_1_FS_AVL_8100_VAL 0x07
+#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 1100
+#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 855
+#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 670
+#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 450
+#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 400
+#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 330
+#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 230
+#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 980
+#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 760
+#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 600
+#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 400
+#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 355
+#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 295
+#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 205
+#define ST_MAGN_1_MULTIREAD_BIT false
+
+/* CUSTOM VALUES FOR SENSOR 2 */
+#define ST_MAGN_2_WAI_EXP 0x3d
+#define ST_MAGN_2_ODR_ADDR 0x20
+#define ST_MAGN_2_ODR_MASK 0x1c
+#define ST_MAGN_2_ODR_AVL_1HZ_VAL 0x00
+#define ST_MAGN_2_ODR_AVL_2HZ_VAL 0x01
+#define ST_MAGN_2_ODR_AVL_3HZ_VAL 0x02
+#define ST_MAGN_2_ODR_AVL_5HZ_VAL 0x03
+#define ST_MAGN_2_ODR_AVL_10HZ_VAL 0x04
+#define ST_MAGN_2_ODR_AVL_20HZ_VAL 0x05
+#define ST_MAGN_2_ODR_AVL_40HZ_VAL 0x06
+#define ST_MAGN_2_ODR_AVL_80HZ_VAL 0x07
+#define ST_MAGN_2_PW_ADDR 0x22
+#define ST_MAGN_2_PW_MASK 0x03
+#define ST_MAGN_2_PW_ON 0x00
+#define ST_MAGN_2_PW_OFF 0x03
+#define ST_MAGN_2_FS_ADDR 0x21
+#define ST_MAGN_2_FS_MASK 0x60
+#define ST_MAGN_2_FS_AVL_4000_VAL 0x00
+#define ST_MAGN_2_FS_AVL_8000_VAL 0x01
+#define ST_MAGN_2_FS_AVL_10000_VAL 0x02
+#define ST_MAGN_2_FS_AVL_4000_GAIN 430
+#define ST_MAGN_2_FS_AVL_8000_GAIN 230
+#define ST_MAGN_2_FS_AVL_10000_GAIN 230
+#define ST_MAGN_2_MULTIREAD_BIT false
+#define ST_MAGN_2_OUT_X_L_ADDR 0x28
+#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
+#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c
+
+static const struct iio_chan_spec st_magn_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_DEFAULT_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_X, IIO_MOD_X, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_X_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Y, IIO_MOD_Y, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Y_L_ADDR),
+ ST_SENSORS_LSM_CHANNELS(IIO_MAGN, ST_SENSORS_SCAN_Z, IIO_MOD_Z, IIO_LE,
+ ST_SENSORS_DEFAULT_16_REALBITS, ST_MAGN_2_OUT_Z_L_ADDR),
+ IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensors st_magn_sensors[] = {
+ {
+ .wai = ST_MAGN_1_WAI_EXP,
+ .sensors_supported = {
+ [0] = LSM303DLHC_MAGN_DEV_NAME,
+ [1] = LSM303DLM_MAGN_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_magn_16bit_channels,
+ .odr = {
+ .addr = ST_MAGN_1_ODR_ADDR,
+ .mask = ST_MAGN_1_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_MAGN_1_ODR_AVL_1HZ_VAL, },
+ { 2, ST_MAGN_1_ODR_AVL_2HZ_VAL, },
+ { 3, ST_MAGN_1_ODR_AVL_3HZ_VAL, },
+ { 8, ST_MAGN_1_ODR_AVL_8HZ_VAL, },
+ { 15, ST_MAGN_1_ODR_AVL_15HZ_VAL, },
+ { 30, ST_MAGN_1_ODR_AVL_30HZ_VAL, },
+ { 75, ST_MAGN_1_ODR_AVL_75HZ_VAL, },
+ { 220, ST_MAGN_1_ODR_AVL_220HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_MAGN_1_PW_ADDR,
+ .mask = ST_MAGN_1_PW_MASK,
+ .value_on = ST_MAGN_1_PW_ON,
+ .value_off = ST_MAGN_1_PW_OFF,
+ },
+ .fs = {
+ .addr = ST_MAGN_1_FS_ADDR,
+ .mask = ST_MAGN_1_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_MAGN_FS_AVL_1300MG,
+ .value = ST_MAGN_1_FS_AVL_1300_VAL,
+ .gain = ST_MAGN_1_FS_AVL_1300_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_1300_GAIN_Z,
+ },
+ [1] = {
+ .num = ST_MAGN_FS_AVL_1900MG,
+ .value = ST_MAGN_1_FS_AVL_1900_VAL,
+ .gain = ST_MAGN_1_FS_AVL_1900_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_1900_GAIN_Z,
+ },
+ [2] = {
+ .num = ST_MAGN_FS_AVL_2500MG,
+ .value = ST_MAGN_1_FS_AVL_2500_VAL,
+ .gain = ST_MAGN_1_FS_AVL_2500_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_2500_GAIN_Z,
+ },
+ [3] = {
+ .num = ST_MAGN_FS_AVL_4000MG,
+ .value = ST_MAGN_1_FS_AVL_4000_VAL,
+ .gain = ST_MAGN_1_FS_AVL_4000_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_4000_GAIN_Z,
+ },
+ [4] = {
+ .num = ST_MAGN_FS_AVL_4700MG,
+ .value = ST_MAGN_1_FS_AVL_4700_VAL,
+ .gain = ST_MAGN_1_FS_AVL_4700_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_4700_GAIN_Z,
+ },
+ [5] = {
+ .num = ST_MAGN_FS_AVL_5600MG,
+ .value = ST_MAGN_1_FS_AVL_5600_VAL,
+ .gain = ST_MAGN_1_FS_AVL_5600_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_5600_GAIN_Z,
+ },
+ [6] = {
+ .num = ST_MAGN_FS_AVL_8100MG,
+ .value = ST_MAGN_1_FS_AVL_8100_VAL,
+ .gain = ST_MAGN_1_FS_AVL_8100_GAIN_XY,
+ .gain2 = ST_MAGN_1_FS_AVL_8100_GAIN_Z,
+ },
+ },
+ },
+ .multi_read_bit = ST_MAGN_1_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+ {
+ .wai = ST_MAGN_2_WAI_EXP,
+ .sensors_supported = {
+ [0] = LIS3MDL_MAGN_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
+ .odr = {
+ .addr = ST_MAGN_2_ODR_ADDR,
+ .mask = ST_MAGN_2_ODR_MASK,
+ .odr_avl = {
+ { 1, ST_MAGN_2_ODR_AVL_1HZ_VAL, },
+ { 2, ST_MAGN_2_ODR_AVL_2HZ_VAL, },
+ { 3, ST_MAGN_2_ODR_AVL_3HZ_VAL, },
+ { 5, ST_MAGN_2_ODR_AVL_5HZ_VAL, },
+ { 10, ST_MAGN_2_ODR_AVL_10HZ_VAL, },
+ { 20, ST_MAGN_2_ODR_AVL_20HZ_VAL, },
+ { 40, ST_MAGN_2_ODR_AVL_40HZ_VAL, },
+ { 80, ST_MAGN_2_ODR_AVL_80HZ_VAL, },
+ },
+ },
+ .pw = {
+ .addr = ST_MAGN_2_PW_ADDR,
+ .mask = ST_MAGN_2_PW_MASK,
+ .value_on = ST_MAGN_2_PW_ON,
+ .value_off = ST_MAGN_2_PW_OFF,
+ },
+ .fs = {
+ .addr = ST_MAGN_2_FS_ADDR,
+ .mask = ST_MAGN_2_FS_MASK,
+ .fs_avl = {
+ [0] = {
+ .num = ST_MAGN_FS_AVL_4000MG,
+ .value = ST_MAGN_2_FS_AVL_4000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_4000_GAIN,
+ },
+ [1] = {
+ .num = ST_MAGN_FS_AVL_8000MG,
+ .value = ST_MAGN_2_FS_AVL_8000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_8000_GAIN,
+ },
+ [2] = {
+ .num = ST_MAGN_FS_AVL_10000MG,
+ .value = ST_MAGN_2_FS_AVL_10000_VAL,
+ .gain = ST_MAGN_2_FS_AVL_10000_GAIN,
+ },
+ },
+ },
+ .multi_read_bit = ST_MAGN_2_MULTIREAD_BIT,
+ .bootime = 2,
+ },
+};
+
+static int st_magn_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *ch, int *val,
+ int *val2, long mask)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ err = st_sensors_read_info_raw(indio_dev, ch, val);
+ if (err < 0)
+ goto read_error;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ if ((ch->scan_index == ST_SENSORS_SCAN_Z) &&
+ (mdata->current_fullscale->gain2 != 0))
+ *val2 = mdata->current_fullscale->gain2;
+ else
+ *val2 = mdata->current_fullscale->gain;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+read_error:
+ return err;
+}
+
+static int st_magn_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+ int err;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);
+
+static struct attribute *st_magn_attributes[] = {
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_in_magn_scale_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group st_magn_attribute_group = {
+ .attrs = st_magn_attributes,
+};
+
+static const struct iio_info magn_info = {
+ .driver_module = THIS_MODULE,
+ .attrs = &st_magn_attribute_group,
+ .read_raw = &st_magn_read_raw,
+ .write_raw = &st_magn_write_raw,
+};
+
+int st_magn_common_probe(struct iio_dev *indio_dev)
+{
+ int err;
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &magn_info;
+
+ err = st_sensors_check_device_support(indio_dev,
+ ARRAY_SIZE(st_magn_sensors), st_magn_sensors);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
+ mdata->multiread_bit = mdata->sensor->multi_read_bit;
+ indio_dev->channels = mdata->sensor->ch;
+ indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+ mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
+ &mdata->sensor->fs.fs_avl[0];
+ mdata->odr = mdata->sensor->odr.odr_avl[0].hz;
+
+ err = st_sensors_init_sensor(indio_dev);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+
+ if (mdata->get_irq_data_ready(indio_dev) > 0) {
+ err = st_magn_allocate_ring(indio_dev);
+ if (err < 0)
+ goto st_magn_common_probe_error;
+ err = st_sensors_allocate_trigger(indio_dev, NULL);
+ if (err < 0)
+ goto st_magn_probe_trigger_error;
+ }
+
+ err = iio_device_register(indio_dev);
+ if (err)
+ goto st_magn_device_register_error;
+
+ return err;
+
+st_magn_device_register_error:
+ if (mdata->get_irq_data_ready(indio_dev) > 0)
+ st_sensors_deallocate_trigger(indio_dev);
+st_magn_probe_trigger_error:
+ if (mdata->get_irq_data_ready(indio_dev) > 0)
+ st_magn_deallocate_ring(indio_dev);
+st_magn_common_probe_error:
+ return err;
+}
+EXPORT_SYMBOL(st_magn_common_probe);
+
+void st_magn_common_remove(struct iio_dev *indio_dev)
+{
+ struct st_sensor_data *mdata = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+ if (mdata->get_irq_data_ready(indio_dev) > 0) {
+ st_sensors_deallocate_trigger(indio_dev);
+ st_magn_deallocate_ring(indio_dev);
+ }
+ iio_device_free(indio_dev);
+}
+EXPORT_SYMBOL(st_magn_common_remove);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
+MODULE_LICENSE("GPL v2");
projects / karo-tx-linux.git / commitdiff