/*
- * ARC700 VIPT Cache Management
+ * ARC Cache Management
*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs
- * -flush_cache_dup_mm (fork)
- * -likewise for flush_cache_mm (exit/execve)
- * -likewise for flush_cache_range,flush_cache_page (munmap, exit, COW-break)
- *
- * vineetg: Apr 2011
- * -Now that MMU can support larger pg sz (16K), the determiniation of
- * aliasing shd not be based on assumption of 8k pg
- *
- * vineetg: Mar 2011
- * -optimised version of flush_icache_range( ) for making I/D coherent
- * when vaddr is available (agnostic of num of aliases)
- *
- * vineetg: Mar 2011
- * -Added documentation about I-cache aliasing on ARC700 and the way it
- * was handled up until MMU V2.
- * -Spotted a three year old bug when killing the 4 aliases, which needs
- * bottom 2 bits, so we need to do paddr | {0x00, 0x01, 0x02, 0x03}
- * instead of paddr | {0x00, 0x01, 0x10, 0x11}
- * (Rajesh you owe me one now)
- *
- * vineetg: Dec 2010
- * -Off-by-one error when computing num_of_lines to flush
- * This broke signal handling with bionic which uses synthetic sigret stub
- *
- * vineetg: Mar 2010
- * -GCC can't generate ZOL for core cache flush loops.
- * Conv them into iterations based as opposed to while (start < end) types
- *
- * Vineetg: July 2009
- * -In I-cache flush routine we used to chk for aliasing for every line INV.
- * Instead now we setup routines per cache geometry and invoke them
- * via function pointers.
- *
- * Vineetg: Jan 2009
- * -Cache Line flush routines used to flush an extra line beyond end addr
- * because check was while (end >= start) instead of (end > start)
- * =Some call sites had to work around by doing -1, -4 etc to end param
- * =Some callers didnt care. This was spec bad in case of INV routines
- * which would discard valid data (cause of the horrible ext2 bug
- * in ARC IDE driver)
- *
- * vineetg: June 11th 2008: Fixed flush_icache_range( )
- * -Since ARC700 caches are not coherent (I$ doesnt snoop D$) both need
- * to be flushed, which it was not doing.
- * -load_module( ) passes vmalloc addr (Kernel Virtual Addr) to the API,
- * however ARC cache maintenance OPs require PHY addr. Thus need to do
- * vmalloc_to_phy.
- * -Also added optimisation there, that for range > PAGE SIZE we flush the
- * entire cache in one shot rather than line by line. For e.g. a module
- * with Code sz 600k, old code flushed 600k worth of cache (line-by-line),
- * while cache is only 16 or 32k.
*/
#include <linux/module.h>
}
/*
- * 1. Validate the Cache Geomtery (compile time config matches hardware)
- * 2. If I-cache suffers from aliasing, setup work arounds (difft flush rtn)
- * (aliasing D-cache configurations are not supported YET)
- * 3. Enable the Caches, setup default flush mode for D-Cache
- * 3. Calculate the SHMLBA used by user space
+ * Line Operation on {I,D}-Cache
*/
-void arc_cache_init(void)
-{
- unsigned int __maybe_unused cpu = smp_processor_id();
- char str[256];
-
- printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
-
- if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
- struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
-
- if (!ic->ver)
- panic("cache support enabled but non-existent cache\n");
-
- if (ic->line_len != L1_CACHE_BYTES)
- panic("ICache line [%d] != kernel Config [%d]",
- ic->line_len, L1_CACHE_BYTES);
-
- if (ic->ver != CONFIG_ARC_MMU_VER)
- panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
- ic->ver, CONFIG_ARC_MMU_VER);
- }
-
- if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
- struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
- int handled;
-
- if (!dc->ver)
- panic("cache support enabled but non-existent cache\n");
-
- if (dc->line_len != L1_CACHE_BYTES)
- panic("DCache line [%d] != kernel Config [%d]",
- dc->line_len, L1_CACHE_BYTES);
-
- /* check for D-Cache aliasing */
- handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-
- if (dc->alias && !handled)
- panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
- else if (!dc->alias && handled)
- panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n");
- }
-}
#define OP_INV 0x1
#define OP_FLUSH 0x2
#define OP_INV_IC 0x4
/*
- * Common Helper for Line Operations on {I,D}-Cache
+ * I-Cache Aliasing in ARC700 VIPT caches (MMU v1-v3)
+ *
+ * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
+ * The orig Cache Management Module "CDU" only required paddr to invalidate a
+ * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
+ * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
+ * the exact same line.
+ *
+ * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
+ * paddr alone could not be used to correctly index the cache.
+ *
+ * ------------------
+ * MMU v1/v2 (Fixed Page Size 8k)
+ * ------------------
+ * The solution was to provide CDU with these additonal vaddr bits. These
+ * would be bits [x:13], x would depend on cache-geometry, 13 comes from
+ * standard page size of 8k.
+ * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
+ * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
+ * orig 5 bits of paddr were anyways ignored by CDU line ops, as they
+ * represent the offset within cache-line. The adv of using this "clumsy"
+ * interface for additional info was no new reg was needed in CDU programming
+ * model.
+ *
+ * 17:13 represented the max num of bits passable, actual bits needed were
+ * fewer, based on the num-of-aliases possible.
+ * -for 2 alias possibility, only bit 13 needed (32K cache)
+ * -for 4 alias possibility, bits 14:13 needed (64K cache)
+ *
+ * ------------------
+ * MMU v3
+ * ------------------
+ * This ver of MMU supports variable page sizes (1k-16k): although Linux will
+ * only support 8k (default), 16k and 4k.
+ * However from hardware perspective, smaller page sizes aggrevate aliasing
+ * meaning more vaddr bits needed to disambiguate the cache-line-op ;
+ * the existing scheme of piggybacking won't work for certain configurations.
+ * Two new registers IC_PTAG and DC_PTAG inttoduced.
+ * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
*/
+
static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
- unsigned long sz, const int cacheop)
+ unsigned long sz, const int op)
{
unsigned int aux_cmd, aux_tag;
int num_lines;
const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE;
- if (cacheop == OP_INV_IC) {
+ if (op == OP_INV_IC) {
aux_cmd = ARC_REG_IC_IVIL;
#if (CONFIG_ARC_MMU_VER > 2)
aux_tag = ARC_REG_IC_PTAG;
}
else {
/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
- aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
+ aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
#if (CONFIG_ARC_MMU_VER > 2)
aux_tag = ARC_REG_DC_PTAG;
#endif
/*
* Operation on Entire D-Cache
- * @cacheop = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV}
+ * @op = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV}
* Note that constant propagation ensures all the checks are gone
* in generated code
*/
-static inline void __dc_entire_op(const int cacheop)
+static inline void __dc_entire_op(const int op)
{
unsigned int ctrl_reg;
int aux;
- ctrl_reg = __before_dc_op(cacheop);
+ ctrl_reg = __before_dc_op(op);
- if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */
+ if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */
aux = ARC_REG_DC_IVDC;
else
aux = ARC_REG_DC_FLSH;
write_aux_reg(aux, 0x1);
- __after_dc_op(cacheop, ctrl_reg);
+ __after_dc_op(op, ctrl_reg);
}
/* For kernel mappings cache operation: index is same as paddr */
#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op)
/*
- * D-Cache : Per Line INV (discard or wback+discard) or FLUSH (wback)
+ * D-Cache Line ops: Per Line INV (discard or wback+discard) or FLUSH (wback)
*/
static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
- unsigned long sz, const int cacheop)
+ unsigned long sz, const int op)
{
unsigned long flags;
unsigned int ctrl_reg;
local_irq_save(flags);
- ctrl_reg = __before_dc_op(cacheop);
+ ctrl_reg = __before_dc_op(op);
- __cache_line_loop(paddr, vaddr, sz, cacheop);
+ __cache_line_loop(paddr, vaddr, sz, op);
- __after_dc_op(cacheop, ctrl_reg);
+ __after_dc_op(op, ctrl_reg);
local_irq_restore(flags);
}
#else
-#define __dc_entire_op(cacheop)
-#define __dc_line_op(paddr, vaddr, sz, cacheop)
-#define __dc_line_op_k(paddr, sz, cacheop)
+#define __dc_entire_op(op)
+#define __dc_line_op(paddr, vaddr, sz, op)
+#define __dc_line_op_k(paddr, sz, op)
#endif /* CONFIG_ARC_HAS_DCACHE */
-
#ifdef CONFIG_ARC_HAS_ICACHE
-/*
- * I-Cache Aliasing in ARC700 VIPT caches
- *
- * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
- * The orig Cache Management Module "CDU" only required paddr to invalidate a
- * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
- * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
- * the exact same line.
- *
- * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
- * paddr alone could not be used to correctly index the cache.
- *
- * ------------------
- * MMU v1/v2 (Fixed Page Size 8k)
- * ------------------
- * The solution was to provide CDU with these additonal vaddr bits. These
- * would be bits [x:13], x would depend on cache-geometry, 13 comes from
- * standard page size of 8k.
- * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
- * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
- * orig 5 bits of paddr were anyways ignored by CDU line ops, as they
- * represent the offset within cache-line. The adv of using this "clumsy"
- * interface for additional info was no new reg was needed in CDU programming
- * model.
- *
- * 17:13 represented the max num of bits passable, actual bits needed were
- * fewer, based on the num-of-aliases possible.
- * -for 2 alias possibility, only bit 13 needed (32K cache)
- * -for 4 alias possibility, bits 14:13 needed (64K cache)
- *
- * ------------------
- * MMU v3
- * ------------------
- * This ver of MMU supports variable page sizes (1k-16k): although Linux will
- * only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggrevate aliasing
- * meaning more vaddr bits needed to disambiguate the cache-line-op ;
- * the existing scheme of piggybacking won't work for certain configurations.
- * Two new registers IC_PTAG and DC_PTAG inttoduced.
- * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
- */
-
-/***********************************************************
- * Machine specific helper for per line I-Cache invalidate.
- */
-
static inline void __ic_entire_inv(void)
{
write_aux_reg(ARC_REG_IC_IVIC, 1);
flush_cache_all();
return 0;
}
+
+void arc_cache_init(void)
+{
+ unsigned int __maybe_unused cpu = smp_processor_id();
+ char str[256];
+
+ printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
+ struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
+
+ if (!ic->ver)
+ panic("cache support enabled but non-existent cache\n");
+
+ if (ic->line_len != L1_CACHE_BYTES)
+ panic("ICache line [%d] != kernel Config [%d]",
+ ic->line_len, L1_CACHE_BYTES);
+
+ if (ic->ver != CONFIG_ARC_MMU_VER)
+ panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
+ ic->ver, CONFIG_ARC_MMU_VER);
+ }
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
+ struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
+ int handled;
+
+ if (!dc->ver)
+ panic("cache support enabled but non-existent cache\n");
+
+ if (dc->line_len != L1_CACHE_BYTES)
+ panic("DCache line [%d] != kernel Config [%d]",
+ dc->line_len, L1_CACHE_BYTES);
+
+ /* check for D-Cache aliasing */
+ handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+
+ if (dc->alias && !handled)
+ panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+ else if (!dc->alias && handled)
+ panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+ }
+}
projects / karo-tx-linux.git / commitdiff