--- /dev/null
+/*
+ * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "meson8.dtsi"
+
+/ {
+ model = "MINIX NEO-X8";
+ compatible = "minix,neo-x8", "amlogic,meson8";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "x8:blue:power";
+ gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c_AO {
+ status = "okay";
+ pinctrl-0 = <&i2c_ao_pins>;
+ pinctrl-names = "default";
+
+ pmic@32 {
+ compatible = "ricoh,rn5t618";
+ reg = <0x32>;
+
+ regulators {
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&spifc {
+ status = "okay";
+ pinctrl-0 = <&spi_nor_pins>;
+ pinctrl-names = "default";
+
+ spi-flash@0 {
+ compatible = "mxicy,mx25l1606e";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "env";
+ reg = <0x100000 0x10000>;
+ };
+ };
+};
+
+&ir_receiver {
+ status = "okay";
+ pinctrl-0 = <&ir_recv_pins>;
+ pinctrl-names = "default";
+};
+
+ðmac {
+ status = "okay";
+ pinctrl-0 = <ð_pins>;
+ pnictrl-names = "default";
+};
* OTHER DEALINGS IN THE SOFTWARE.
*/
+#include <dt-bindings/gpio/meson8-gpio.h>
/include/ "meson.dtsi"
/ {
compatible = "fixed-clock";
clock-frequency = <141666666>;
};
+
+ pinctrl: pinctrl@c1109880 {
+ compatible = "amlogic,meson8-pinctrl";
+ reg = <0xc1109880 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio: banks@c11080b0 {
+ reg = <0xc11080b0 0x28>,
+ <0xc11080e8 0x18>,
+ <0xc1108120 0x18>,
+ <0xc1108030 0x30>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_ao: ao-bank@c1108030 {
+ reg = <0xc8100014 0x4>,
+ <0xc810002c 0x4>,
+ <0xc8100024 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_mst_ao {
+ mux {
+ groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+ function = "i2c_mst_ao";
+ };
+ };
+
+ spi_nor_pins: nor {
+ mux {
+ groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+ function = "nor";
+ };
+ };
+
+ ir_recv_pins: remote {
+ mux {
+ groups = "remote_input";
+ function = "remote";
+ };
+ };
+
+ eth_pins: ethernet {
+ mux {
+ groups = "eth_tx_clk_50m", "eth_tx_en",
+ "eth_txd1", "eth_txd0",
+ "eth_rx_clk_in", "eth_rx_dv",
+ "eth_rxd1", "eth_rxd0", "eth_mdio",
+ "eth_mdc";
+ function = "ethernet";
+ };
+ };
+ };
+
}; /* end of / */
projects / karo-tx-linux.git / commitdiff