* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits)
gpu/stub: fix acpi_video build error, fix stub kconfig dependencies
drm/radeon/kms: dynamically allocate power state space
drm/radeon/kms: fix s/r issues with bios scratch regs
agp: ensure GART has an address before enabling it
Revert "agp: AMD AGP is used on UP1100 & UP1500 alpha boxen"
amd-k7-agp: remove non-x86 code
drm/radeon/kms/evergreen: always set certain VGT regs at CP init
drm/radeon/kms: add updated ib_execute function for evergreen
drm/radeon: remove 0x4243 pci id
drm/radeon/kms: Enable new pll calculation for avivo+ asics
drm/radeon/kms: add new pll algo for avivo asics
drm/radeon/kms: add pll debugging output
drm/radeon/kms: switch back to min->max pll post divider iteration
drm/radeon/kms: rv6xx+ thermal sensor fixes
drm/nv50: fix display on 0x50
drm/nouveau: correctly pair hwmon_init and hwmon_fini
drm/i915: Only bind to function 0 of the PCI device
drm/i915: Suppress spurious vblank interrupts
drm: Avoid leak of adjusted mode along quick set_mode paths
drm: Simplify and defend later checks when disabling a crtc
...
config AGP_AMD
tristate "AMD Irongate, 761, and 762 chipset support"
- depends on AGP && (X86_32 || ALPHA)
+ depends on AGP && X86_32
help
This option gives you AGP support for the GLX component of
X on AMD Irongate, 761, and 762 chipsets.
if (page_map->real == NULL)
return -ENOMEM;
-#ifndef CONFIG_X86
- SetPageReserved(virt_to_page(page_map->real));
- global_cache_flush();
- page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real),
- PAGE_SIZE);
- if (page_map->remapped == NULL) {
- ClearPageReserved(virt_to_page(page_map->real));
- free_page((unsigned long) page_map->real);
- page_map->real = NULL;
- return -ENOMEM;
- }
- global_cache_flush();
-#else
set_memory_uc((unsigned long)page_map->real, 1);
page_map->remapped = page_map->real;
-#endif
for (i = 0; i < PAGE_SIZE / sizeof(unsigned long); i++) {
writel(agp_bridge->scratch_page, page_map->remapped+i);
static void amd_free_page_map(struct amd_page_map *page_map)
{
-#ifndef CONFIG_X86
- iounmap(page_map->remapped);
- ClearPageReserved(virt_to_page(page_map->real));
-#else
set_memory_wb((unsigned long)page_map->real, 1);
-#endif
free_page((unsigned long) page_map->real);
}
dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
- /*
- * If the device has not been properly setup, the following will catch
- * the problem and should stop the system from crashing.
- * 20030610 - hamish@zot.org
- */
- if (pci_enable_device(pdev)) {
- dev_err(&pdev->dev, "can't enable PCI device\n");
- agp_put_bridge(bridge);
- return -ENODEV;
- }
-
/*
* The following fixes the case where the BIOS has "forgotten" to
* provide an address range for the GART.
* 20030610 - hamish@zot.org
+ * This happens before pci_enable_device() intentionally;
+ * calling pci_enable_device() before assigning the resource
+ * will result in the GART being disabled on machines with such
+ * BIOSs (the GART ends up with a BAR starting at 0, which
+ * conflicts a lot of other devices).
*/
r = &pdev->resource[0];
if (!r->start && r->end) {
}
}
+ /*
+ * If the device has not been properly setup, the following will catch
+ * the problem and should stop the system from crashing.
+ * 20030610 - hamish@zot.org
+ */
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev, "can't enable PCI device\n");
+ agp_put_bridge(bridge);
+ return -ENODEV;
+ }
+
/* Fill in the mode register */
if (cap_ptr) {
pci_read_config_dword(pdev,
mutex_unlock(&dev->mode_config.mutex);
return ret;
}
+
+void drm_mode_config_reset(struct drm_device *dev)
+{
+ struct drm_crtc *crtc;
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+ if (crtc->funcs->reset)
+ crtc->funcs->reset(crtc);
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+ if (encoder->funcs->reset)
+ encoder->funcs->reset(encoder);
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->funcs->reset)
+ connector->funcs->reset(connector);
+}
+EXPORT_SYMBOL(drm_mode_config_reset);
struct drm_encoder *encoder;
bool ret = true;
- adjusted_mode = drm_mode_duplicate(dev, mode);
-
crtc->enabled = drm_helper_crtc_in_use(crtc);
-
if (!crtc->enabled)
return true;
+ adjusted_mode = drm_mode_duplicate(dev, mode);
+
saved_hwmode = crtc->hwmode;
saved_mode = crtc->mode;
saved_x = crtc->x;
*/
drm_calc_timestamping_constants(crtc);
- /* XXX free adjustedmode */
- drm_mode_destroy(dev, adjusted_mode);
/* FIXME: add subpixel order */
done:
+ drm_mode_destroy(dev, adjusted_mode);
if (!ret) {
crtc->hwmode = saved_hwmode;
crtc->mode = saved_mode;
crtc_funcs = set->crtc->helper_private;
+ if (!set->mode)
+ set->fb = NULL;
+
if (set->fb) {
DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
set->crtc->base.id, set->fb->base.id,
(int)set->num_connectors, set->x, set->y);
} else {
- DRM_DEBUG_KMS("[CRTC:%d] [NOFB] #connectors=%d (x y) (%i %i)\n",
- set->crtc->base.id, (int)set->num_connectors,
- set->x, set->y);
+ DRM_DEBUG_KMS("[CRTC:%d] [NOFB]\n", set->crtc->base.id);
+ set->mode = NULL;
+ set->num_connectors = 0;
}
dev = set->crtc->dev;
mode_changed = true;
if (mode_changed) {
- set->crtc->enabled = (set->mode != NULL);
- if (set->mode != NULL) {
+ set->crtc->enabled = drm_helper_crtc_in_use(set->crtc);
+ if (set->crtc->enabled) {
DRM_DEBUG_KMS("attempting to set mode from"
" userspace\n");
drm_mode_debug_printmodeline(set->mode);
* Drivers should call this routine in their vblank interrupt handlers to
* update the vblank counter and send any signals that may be pending.
*/
-void drm_handle_vblank(struct drm_device *dev, int crtc)
+bool drm_handle_vblank(struct drm_device *dev, int crtc)
{
u32 vblcount;
s64 diff_ns;
unsigned long irqflags;
if (!dev->num_crtcs)
- return;
+ return false;
/* Need timestamp lock to prevent concurrent execution with
* vblank enable/disable, as this would cause inconsistent
/* Vblank irq handling disabled. Nothing to do. */
if (!dev->vblank_enabled[crtc]) {
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
- return;
+ return false;
}
/* Fetch corresponding timestamp for this vblank interval from
drm_handle_vblank_events(dev, crtc);
spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
+ return true;
}
EXPORT_SYMBOL(drm_handle_vblank);
error = i915_gem_init_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
+ drm_mode_config_reset(dev);
drm_irq_install(dev);
/* Resume the modeset for every activated CRTC */
mutex_unlock(&dev->struct_mutex);
drm_irq_uninstall(dev);
+ drm_mode_config_reset(dev);
drm_irq_install(dev);
mutex_lock(&dev->struct_mutex);
}
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ /* Only bind to function 0 of the device. Early generations
+ * used function 1 as a placeholder for multi-head. This causes
+ * us confusion instead, especially on the systems where both
+ * functions have the same PCI-ID!
+ */
+ if (PCI_FUNC(pdev->devfn))
+ return -ENODEV;
+
return drm_get_pci_dev(pdev, ent, &driver);
}
intel_finish_page_flip_plane(dev, 1);
}
- if (pipea_stats & vblank_status) {
+ if (pipea_stats & vblank_status &&
+ drm_handle_vblank(dev, 0)) {
vblank++;
- drm_handle_vblank(dev, 0);
if (!dev_priv->flip_pending_is_done) {
i915_pageflip_stall_check(dev, 0);
intel_finish_page_flip(dev, 0);
}
}
- if (pipeb_stats & vblank_status) {
+ if (pipeb_stats & vblank_status &&
+ drm_handle_vblank(dev, 1)) {
vblank++;
- drm_handle_vblank(dev, 1);
if (!dev_priv->flip_pending_is_done) {
i915_pageflip_stall_check(dev, 1);
intel_finish_page_flip(dev, 1);
return 0;
}
+static void intel_crt_reset(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct intel_crt *crt = intel_attached_crt(connector);
+
+ if (HAS_PCH_SPLIT(dev))
+ crt->force_hotplug_required = 1;
+}
+
/*
* Routines for controlling stuff on the analog port
*/
};
static const struct drm_connector_funcs intel_crt_connector_funcs = {
+ .reset = intel_crt_reset,
.dpms = drm_helper_connector_dpms,
.detect = intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
return ret;
}
+static void intel_crtc_reset(struct drm_crtc *crtc)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ /* Reset flags back to the 'unknown' status so that they
+ * will be correctly set on the initial modeset.
+ */
+ intel_crtc->cursor_addr = 0;
+ intel_crtc->dpms_mode = -1;
+ intel_crtc->active = true; /* force the pipe off on setup_init_config */
+}
+
static struct drm_crtc_helper_funcs intel_helper_funcs = {
.dpms = intel_crtc_dpms,
.mode_fixup = intel_crtc_mode_fixup,
};
static const struct drm_crtc_funcs intel_crtc_funcs = {
+ .reset = intel_crtc_reset,
.cursor_set = intel_crtc_cursor_set,
.cursor_move = intel_crtc_cursor_move,
.gamma_set = intel_crtc_gamma_set,
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
- intel_crtc->cursor_addr = 0;
- intel_crtc->dpms_mode = -1;
- intel_crtc->active = true; /* force the pipe off on setup_init_config */
+ intel_crtc_reset(&intel_crtc->base);
if (HAS_PCH_SPLIT(dev)) {
intel_helper_funcs.prepare = ironlake_crtc_prepare;
return false;
}
- i = 3;
- while (status == SDVO_CMD_STATUS_PENDING && i--) {
- if (!intel_sdvo_read_byte(intel_sdvo,
- SDVO_I2C_CMD_STATUS,
- &status))
- return false;
- }
- if (status != SDVO_CMD_STATUS_SUCCESS) {
- DRM_DEBUG_KMS("command returns response %s [%d]\n",
- status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP ? cmd_status_names[status] : "???",
- status);
- return false;
- }
-
return true;
}
u8 status;
int i;
+ DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo));
+
/*
* The documentation states that all commands will be
* processed within 15µs, and that we need only poll
*
* Check 5 times in case the hardware failed to read the docs.
*/
- do {
+ if (!intel_sdvo_read_byte(intel_sdvo,
+ SDVO_I2C_CMD_STATUS,
+ &status))
+ goto log_fail;
+
+ while (status == SDVO_CMD_STATUS_PENDING && retry--) {
+ udelay(15);
if (!intel_sdvo_read_byte(intel_sdvo,
SDVO_I2C_CMD_STATUS,
&status))
- return false;
- } while (status == SDVO_CMD_STATUS_PENDING && --retry);
+ goto log_fail;
+ }
- DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(intel_sdvo));
if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
DRM_LOG_KMS("(%s)", cmd_status_names[status]);
else
return true;
log_fail:
- DRM_LOG_KMS("\n");
+ DRM_LOG_KMS("... failed\n");
return false;
}
static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo,
u8 ddc_bus)
{
+ /* This must be the immediately preceding write before the i2c xfer */
return intel_sdvo_write_cmd(intel_sdvo,
SDVO_CMD_SET_CONTROL_BUS_SWITCH,
&ddc_bus, 1);
static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len)
{
- return intel_sdvo_write_cmd(intel_sdvo, cmd, data, len);
+ if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len))
+ return false;
+
+ return intel_sdvo_read_response(intel_sdvo, NULL, 0);
}
static bool
intel_dip_infoframe_csum(&avi_if);
- if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_INDEX,
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_INDEX,
set_buf_index, 2))
return false;
for (i = 0; i < sizeof(avi_if); i += 8) {
- if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_DATA,
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_DATA,
data, 8))
return false;
data++;
}
- return intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_HBUF_TXRATE,
+ return intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_TXRATE,
&tx_rate, 1);
}
struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
if (pm->hwmon) {
- sysfs_remove_group(&pm->hwmon->kobj, &hwmon_attrgroup);
+ sysfs_remove_group(&dev->pdev->dev.kobj, &hwmon_attrgroup);
hwmon_device_unregister(pm->hwmon);
}
#endif
nv50_evo_channel_del(&dev_priv->evo);
return ret;
}
- } else
- if (dev_priv->chipset != 0x50) {
+ } else {
ret = nv50_evo_dmaobj_new(evo, 0x3d, NvEvoFB16, 0x70, 0x19,
0, 0xffffffff, 0x00010000);
if (ret) {
dp_clock = dig_connector->dp_clock;
}
}
+/* this might work properly with the new pll algo */
#if 0 /* doesn't work properly on some laptops */
/* use recommended ref_div for ss */
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
adjusted_clock = mode->clock * 2;
if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
+ /* rv515 needs more testing with this option */
+ if (rdev->family != CHIP_RV515) {
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ pll->flags |= RADEON_PLL_IS_LCD;
+ }
} else {
if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
/* adjust pixel clock as needed */
adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss);
- radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
- &ref_div, &post_div);
+ /* rv515 seems happier with the old algo */
+ if (rdev->family == CHIP_RV515)
+ radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+ &ref_div, &post_div);
+ else if (ASIC_IS_AVIVO(rdev))
+ radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+ &ref_div, &post_div);
+ else
+ radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+ &ref_div, &post_div);
atombios_crtc_program_ss(crtc, ATOM_DISABLE, radeon_crtc->pll_id, &ss);
}
/* get temperature in millidegrees */
-u32 evergreen_get_temp(struct radeon_device *rdev)
+int evergreen_get_temp(struct radeon_device *rdev)
{
u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
ASIC_T_SHIFT;
u32 actual_temp = 0;
- if ((temp >> 10) & 1)
- actual_temp = 0;
- else if ((temp >> 9) & 1)
+ if (temp & 0x400)
+ actual_temp = -256;
+ else if (temp & 0x200)
actual_temp = 255;
- else
- actual_temp = (temp >> 1) & 0xff;
+ else if (temp & 0x100) {
+ actual_temp = temp & 0x1ff;
+ actual_temp |= ~0x1ff;
+ } else
+ actual_temp = temp & 0xff;
- return actual_temp * 1000;
+ return (actual_temp * 1000) / 2;
}
-u32 sumo_get_temp(struct radeon_device *rdev)
+int sumo_get_temp(struct radeon_device *rdev)
{
u32 temp = RREG32(CG_THERMAL_STATUS) & 0xff;
- u32 actual_temp = (temp >> 1) & 0xff;
+ int actual_temp = temp - 49;
return actual_temp * 1000;
}
/*
* CP.
*/
+void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib)
+{
+ /* set to DX10/11 mode */
+ radeon_ring_write(rdev, PACKET3(PACKET3_MODE_CONTROL, 0));
+ radeon_ring_write(rdev, 1);
+ /* FIXME: implement */
+ radeon_ring_write(rdev, PACKET3(PACKET3_INDIRECT_BUFFER, 2));
+ radeon_ring_write(rdev, ib->gpu_addr & 0xFFFFFFFC);
+ radeon_ring_write(rdev, upper_32_bits(ib->gpu_addr) & 0xFF);
+ radeon_ring_write(rdev, ib->length_dw);
+}
+
static int evergreen_cp_load_microcode(struct radeon_device *rdev)
{
cp_me = 0xff;
WREG32(CP_ME_CNTL, cp_me);
- r = radeon_ring_lock(rdev, evergreen_default_size + 15);
+ r = radeon_ring_lock(rdev, evergreen_default_size + 19);
if (r) {
DRM_ERROR("radeon: cp failed to lock ring (%d).\n", r);
return r;
radeon_ring_write(rdev, 0xffffffff);
radeon_ring_write(rdev, 0xffffffff);
+ radeon_ring_write(rdev, 0xc0026900);
+ radeon_ring_write(rdev, 0x00000316);
+ radeon_ring_write(rdev, 0x0000000e); /* VGT_VERTEX_REUSE_BLOCK_CNTL */
+ radeon_ring_write(rdev, 0x00000010); /* */
+
radeon_ring_unlock_commit(rdev);
return 0;
WREG32(VGT_CACHE_INVALIDATION, vgt_cache_invalidation);
WREG32(VGT_GS_VERTEX_REUSE, 16);
+ WREG32(PA_SU_LINE_STIPPLE_VALUE, 0);
WREG32(PA_SC_LINE_STIPPLE_STATE, 0);
WREG32(VGT_VERTEX_REUSE_BLOCK_CNTL, 14);
}
-/* emits 34 */
+/* emits 36 */
static void
set_default_state(struct radeon_device *rdev)
{
radeon_ring_write(rdev, 0x00000000);
radeon_ring_write(rdev, 0x00000000);
+ /* set to DX10/11 mode */
+ radeon_ring_write(rdev, PACKET3(PACKET3_MODE_CONTROL, 0));
+ radeon_ring_write(rdev, 1);
+
/* emit an IB pointing at default state */
dwords = ALIGN(rdev->r600_blit.state_len, 0x10);
gpu_addr = rdev->r600_blit.shader_gpu_addr + rdev->r600_blit.state_offset;
/* calculate number of loops correctly */
ring_size = num_loops * dwords_per_loop;
/* set default + shaders */
- ring_size += 50; /* shaders + def state */
+ ring_size += 52; /* shaders + def state */
ring_size += 10; /* fence emit for VB IB */
ring_size += 5; /* done copy */
ring_size += 10; /* fence emit for done copy */
if (r)
return r;
- set_default_state(rdev); /* 34 */
+ set_default_state(rdev); /* 36 */
set_shaders(rdev); /* 16 */
return 0;
}
#define FORCE_EOV_MAX_CLK_CNT(x) ((x) << 0)
#define FORCE_EOV_MAX_REZ_CNT(x) ((x) << 16)
#define PA_SC_LINE_STIPPLE 0x28A0C
+#define PA_SU_LINE_STIPPLE_VALUE 0x8A60
#define PA_SC_LINE_STIPPLE_STATE 0x8B10
#define SCRATCH_REG0 0x8500
#define PACKET3_DISPATCH_DIRECT 0x15
#define PACKET3_DISPATCH_INDIRECT 0x16
#define PACKET3_INDIRECT_BUFFER_END 0x17
+#define PACKET3_MODE_CONTROL 0x18
#define PACKET3_SET_PREDICATION 0x20
#define PACKET3_REG_RMW 0x21
#define PACKET3_COND_EXEC 0x22
static void r600_pcie_gen2_enable(struct radeon_device *rdev);
/* get temperature in millidegrees */
-u32 rv6xx_get_temp(struct radeon_device *rdev)
+int rv6xx_get_temp(struct radeon_device *rdev)
{
u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >>
ASIC_T_SHIFT;
+ int actual_temp = temp & 0xff;
- return temp * 1000;
+ if (temp & 0x100)
+ actual_temp -= 256;
+
+ return actual_temp * 1000;
}
void r600_pm_get_dynpm_state(struct radeon_device *rdev)
void radeon_atombios_get_power_modes(struct radeon_device *rdev);
void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level);
void rs690_pm_info(struct radeon_device *rdev);
-extern u32 rv6xx_get_temp(struct radeon_device *rdev);
-extern u32 rv770_get_temp(struct radeon_device *rdev);
-extern u32 evergreen_get_temp(struct radeon_device *rdev);
-extern u32 sumo_get_temp(struct radeon_device *rdev);
+extern int rv6xx_get_temp(struct radeon_device *rdev);
+extern int rv770_get_temp(struct radeon_device *rdev);
+extern int evergreen_get_temp(struct radeon_device *rdev);
+extern int sumo_get_temp(struct radeon_device *rdev);
/*
* Fences.
fixed20_12 sclk;
fixed20_12 mclk;
fixed20_12 needed_bandwidth;
- /* XXX: use a define for num power modes */
- struct radeon_power_state power_state[8];
+ struct radeon_power_state *power_state;
/* number of valid power states */
int num_power_states;
int current_power_state_index;
.gart_tlb_flush = &evergreen_pcie_gart_tlb_flush,
.gart_set_page = &rs600_gart_set_page,
.ring_test = &r600_ring_test,
- .ring_ib_execute = &r600_ring_ib_execute,
+ .ring_ib_execute = &evergreen_ring_ib_execute,
.irq_set = &evergreen_irq_set,
.irq_process = &evergreen_irq_process,
.get_vblank_counter = &evergreen_get_vblank_counter,
.gart_tlb_flush = &evergreen_pcie_gart_tlb_flush,
.gart_set_page = &rs600_gart_set_page,
.ring_test = &r600_ring_test,
- .ring_ib_execute = &r600_ring_ib_execute,
+ .ring_ib_execute = &evergreen_ring_ib_execute,
.irq_set = &evergreen_irq_set,
.irq_process = &evergreen_irq_process,
.get_vblank_counter = &evergreen_get_vblank_counter,
.gart_tlb_flush = &evergreen_pcie_gart_tlb_flush,
.gart_set_page = &rs600_gart_set_page,
.ring_test = &r600_ring_test,
- .ring_ib_execute = &r600_ring_ib_execute,
+ .ring_ib_execute = &evergreen_ring_ib_execute,
.irq_set = &evergreen_irq_set,
.irq_process = &evergreen_irq_process,
.get_vblank_counter = &evergreen_get_vblank_counter,
bool evergreen_gpu_is_lockup(struct radeon_device *rdev);
int evergreen_asic_reset(struct radeon_device *rdev);
void evergreen_bandwidth_update(struct radeon_device *rdev);
+void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int evergreen_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
unsigned num_pages, struct radeon_fence *fence);
p1pll->pll_out_min = 64800;
else
p1pll->pll_out_min = 20000;
- } else if (p1pll->pll_out_min > 64800) {
- /* Limiting the pll output range is a good thing generally as
- * it limits the number of possible pll combinations for a given
- * frequency presumably to the ones that work best on each card.
- * However, certain duallink DVI monitors seem to like
- * pll combinations that would be limited by this at least on
- * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per
- * family.
- */
- p1pll->pll_out_min = 64800;
}
p1pll->pll_in_min =
num_modes = power_info->info.ucNumOfPowerModeEntries;
if (num_modes > ATOM_MAX_NUMBEROF_POWER_BLOCK)
num_modes = ATOM_MAX_NUMBEROF_POWER_BLOCK;
+ rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * num_modes, GFP_KERNEL);
+ if (!rdev->pm.power_state)
+ return state_index;
/* last mode is usually default, array is low to high */
for (i = 0; i < num_modes; i++) {
rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
power_info = (union power_info *)(mode_info->atom_context->bios + data_offset);
radeon_atombios_add_pplib_thermal_controller(rdev, &power_info->pplib.sThermalController);
+ rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) *
+ power_info->pplib.ucNumStates, GFP_KERNEL);
+ if (!rdev->pm.power_state)
+ return state_index;
/* first mode is usually default, followed by low to high */
for (i = 0; i < power_info->pplib.ucNumStates; i++) {
mode_index = 0;
non_clock_info_array = (struct NonClockInfoArray *)
(mode_info->atom_context->bios + data_offset +
power_info->pplib.usNonClockInfoArrayOffset);
+ rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) *
+ state_array->ucNumEntries, GFP_KERNEL);
+ if (!rdev->pm.power_state)
+ return state_index;
for (i = 0; i < state_array->ucNumEntries; i++) {
mode_index = 0;
power_state = (union pplib_power_state *)&state_array->states[i];
break;
}
} else {
- /* add the default mode */
- rdev->pm.power_state[state_index].type =
- POWER_STATE_TYPE_DEFAULT;
- rdev->pm.power_state[state_index].num_clock_modes = 1;
- rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
- rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
- rdev->pm.power_state[state_index].default_clock_mode =
- &rdev->pm.power_state[state_index].clock_info[0];
- rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
- rdev->pm.power_state[state_index].pcie_lanes = 16;
- rdev->pm.default_power_state_index = state_index;
- rdev->pm.power_state[state_index].flags = 0;
- state_index++;
+ rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL);
+ if (rdev->pm.power_state) {
+ /* add the default mode */
+ rdev->pm.power_state[state_index].type =
+ POWER_STATE_TYPE_DEFAULT;
+ rdev->pm.power_state[state_index].num_clock_modes = 1;
+ rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
+ rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
+ rdev->pm.power_state[state_index].default_clock_mode =
+ &rdev->pm.power_state[state_index].clock_info[0];
+ rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+ rdev->pm.power_state[state_index].pcie_lanes = 16;
+ rdev->pm.default_power_state_index = state_index;
+ rdev->pm.power_state[state_index].flags = 0;
+ state_index++;
+ }
}
rdev->pm.num_power_states = state_index;
bios_2_scratch &= ~ATOM_S2_VRI_BRIGHT_ENABLE;
/* tell the bios not to handle mode switching */
- bios_6_scratch |= (ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH | ATOM_S6_ACC_MODE);
+ bios_6_scratch |= ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH;
if (rdev->family >= CHIP_R600) {
WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
else
bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
- if (lock)
+ if (lock) {
bios_6_scratch |= ATOM_S6_CRITICAL_STATE;
- else
+ bios_6_scratch &= ~ATOM_S6_ACC_MODE;
+ } else {
bios_6_scratch &= ~ATOM_S6_CRITICAL_STATE;
+ bios_6_scratch |= ATOM_S6_ACC_MODE;
+ }
if (rdev->family >= CHIP_R600)
WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);
rdev->pm.default_power_state_index = -1;
+ /* allocate 2 power states */
+ rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * 2, GFP_KERNEL);
+ if (!rdev->pm.power_state) {
+ rdev->pm.default_power_state_index = state_index;
+ rdev->pm.num_power_states = 0;
+
+ rdev->pm.current_power_state_index = rdev->pm.default_power_state_index;
+ rdev->pm.current_clock_mode_index = 0;
+ return;
+ }
+
if (rdev->flags & RADEON_IS_MOBILITY) {
offset = combios_get_table_offset(dev, COMBIOS_POWERPLAY_INFO_TABLE);
if (offset) {
return ret;
}
+/* avivo */
+static void avivo_get_fb_div(struct radeon_pll *pll,
+ u32 target_clock,
+ u32 post_div,
+ u32 ref_div,
+ u32 *fb_div,
+ u32 *frac_fb_div)
+{
+ u32 tmp = post_div * ref_div;
+
+ tmp *= target_clock;
+ *fb_div = tmp / pll->reference_freq;
+ *frac_fb_div = tmp % pll->reference_freq;
+}
+
+static u32 avivo_get_post_div(struct radeon_pll *pll,
+ u32 target_clock)
+{
+ u32 vco, post_div, tmp;
+
+ if (pll->flags & RADEON_PLL_USE_POST_DIV)
+ return pll->post_div;
+
+ if (pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP) {
+ if (pll->flags & RADEON_PLL_IS_LCD)
+ vco = pll->lcd_pll_out_min;
+ else
+ vco = pll->pll_out_min;
+ } else {
+ if (pll->flags & RADEON_PLL_IS_LCD)
+ vco = pll->lcd_pll_out_max;
+ else
+ vco = pll->pll_out_max;
+ }
+
+ post_div = vco / target_clock;
+ tmp = vco % target_clock;
+
+ if (pll->flags & RADEON_PLL_PREFER_MINM_OVER_MAXP) {
+ if (tmp)
+ post_div++;
+ } else {
+ if (!tmp)
+ post_div--;
+ }
+
+ return post_div;
+}
+
+#define MAX_TOLERANCE 10
+
+void radeon_compute_pll_avivo(struct radeon_pll *pll,
+ u32 freq,
+ u32 *dot_clock_p,
+ u32 *fb_div_p,
+ u32 *frac_fb_div_p,
+ u32 *ref_div_p,
+ u32 *post_div_p)
+{
+ u32 target_clock = freq / 10;
+ u32 post_div = avivo_get_post_div(pll, target_clock);
+ u32 ref_div = pll->min_ref_div;
+ u32 fb_div = 0, frac_fb_div = 0, tmp;
+
+ if (pll->flags & RADEON_PLL_USE_REF_DIV)
+ ref_div = pll->reference_div;
+
+ if (pll->flags & RADEON_PLL_USE_FRAC_FB_DIV) {
+ avivo_get_fb_div(pll, target_clock, post_div, ref_div, &fb_div, &frac_fb_div);
+ frac_fb_div = (100 * frac_fb_div) / pll->reference_freq;
+ if (frac_fb_div >= 5) {
+ frac_fb_div -= 5;
+ frac_fb_div = frac_fb_div / 10;
+ frac_fb_div++;
+ }
+ if (frac_fb_div >= 10) {
+ fb_div++;
+ frac_fb_div = 0;
+ }
+ } else {
+ while (ref_div <= pll->max_ref_div) {
+ avivo_get_fb_div(pll, target_clock, post_div, ref_div,
+ &fb_div, &frac_fb_div);
+ if (frac_fb_div >= (pll->reference_freq / 2))
+ fb_div++;
+ frac_fb_div = 0;
+ tmp = (pll->reference_freq * fb_div) / (post_div * ref_div);
+ tmp = (tmp * 10000) / target_clock;
+
+ if (tmp > (10000 + MAX_TOLERANCE))
+ ref_div++;
+ else if (tmp >= (10000 - MAX_TOLERANCE))
+ break;
+ else
+ ref_div++;
+ }
+ }
+
+ *dot_clock_p = ((pll->reference_freq * fb_div * 10) + (pll->reference_freq * frac_fb_div)) /
+ (ref_div * post_div * 10);
+ *fb_div_p = fb_div;
+ *frac_fb_div_p = frac_fb_div;
+ *ref_div_p = ref_div;
+ *post_div_p = post_div;
+ DRM_DEBUG_KMS("%d, pll dividers - fb: %d.%d ref: %d, post %d\n",
+ *dot_clock_p, fb_div, frac_fb_div, ref_div, post_div);
+}
+
+/* pre-avivo */
static inline uint32_t radeon_div(uint64_t n, uint32_t d)
{
uint64_t mod;
return n;
}
-void radeon_compute_pll(struct radeon_pll *pll,
- uint64_t freq,
- uint32_t *dot_clock_p,
- uint32_t *fb_div_p,
- uint32_t *frac_fb_div_p,
- uint32_t *ref_div_p,
- uint32_t *post_div_p)
+void radeon_compute_pll_legacy(struct radeon_pll *pll,
+ uint64_t freq,
+ uint32_t *dot_clock_p,
+ uint32_t *fb_div_p,
+ uint32_t *frac_fb_div_p,
+ uint32_t *ref_div_p,
+ uint32_t *post_div_p)
{
uint32_t min_ref_div = pll->min_ref_div;
uint32_t max_ref_div = pll->max_ref_div;
pll_out_max = pll->pll_out_max;
}
+ if (pll_out_min > 64800)
+ pll_out_min = 64800;
+
if (pll->flags & RADEON_PLL_USE_REF_DIV)
min_ref_div = max_ref_div = pll->reference_div;
else {
max_fractional_feed_div = pll->max_frac_feedback_div;
}
- for (post_div = max_post_div; post_div >= min_post_div; --post_div) {
+ for (post_div = min_post_div; post_div <= max_post_div; ++post_div) {
uint32_t ref_div;
if ((pll->flags & RADEON_PLL_NO_ODD_POST_DIV) && (post_div & 1))
*frac_fb_div_p = best_frac_feedback_div;
*ref_div_p = best_ref_div;
*post_div_p = best_post_div;
+ DRM_DEBUG_KMS("%d %d, pll dividers - fb: %d.%d ref: %d, post %d\n",
+ freq, best_freq / 1000, best_feedback_div, best_frac_feedback_div,
+ best_ref_div, best_post_div);
+
}
static void radeon_user_framebuffer_destroy(struct drm_framebuffer *fb)
if (!ASIC_IS_DCE4(rdev))
return;
- if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) ||
+ if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) &&
(action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
return;
DRM_DEBUG_KMS("\n");
if (!use_bios_divs) {
- radeon_compute_pll(pll, mode->clock,
- &freq, &feedback_div, &frac_fb_div,
- &reference_div, &post_divider);
+ radeon_compute_pll_legacy(pll, mode->clock,
+ &freq, &feedback_div, &frac_fb_div,
+ &reference_div, &post_divider);
for (post_div = &post_divs[0]; post_div->divider; ++post_div) {
if (post_div->divider == post_divider)
#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
#define RADEON_PLL_USE_POST_DIV (1 << 12)
#define RADEON_PLL_IS_LCD (1 << 13)
+#define RADEON_PLL_PREFER_MINM_OVER_MAXP (1 << 14)
struct radeon_pll {
/* reference frequency */
struct radeon_atom_ss *ss,
int id, u32 clock);
-extern void radeon_compute_pll(struct radeon_pll *pll,
- uint64_t freq,
- uint32_t *dot_clock_p,
- uint32_t *fb_div_p,
- uint32_t *frac_fb_div_p,
- uint32_t *ref_div_p,
- uint32_t *post_div_p);
+extern void radeon_compute_pll_legacy(struct radeon_pll *pll,
+ uint64_t freq,
+ uint32_t *dot_clock_p,
+ uint32_t *fb_div_p,
+ uint32_t *frac_fb_div_p,
+ uint32_t *ref_div_p,
+ uint32_t *post_div_p);
+
+extern void radeon_compute_pll_avivo(struct radeon_pll *pll,
+ u32 freq,
+ u32 *dot_clock_p,
+ u32 *fb_div_p,
+ u32 *frac_fb_div_p,
+ u32 *ref_div_p,
+ u32 *post_div_p);
extern void radeon_setup_encoder_clones(struct drm_device *dev);
{
struct drm_device *ddev = pci_get_drvdata(to_pci_dev(dev));
struct radeon_device *rdev = ddev->dev_private;
- u32 temp;
+ int temp;
switch (rdev->pm.int_thermal_type) {
case THERMAL_TYPE_RV6XX:
#endif
}
+ if (rdev->pm.power_state)
+ kfree(rdev->pm.power_state);
+
radeon_hwmon_fini(rdev);
}
}
/* get temperature in millidegrees */
-u32 rv770_get_temp(struct radeon_device *rdev)
+int rv770_get_temp(struct radeon_device *rdev)
{
u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
ASIC_T_SHIFT;
- u32 actual_temp = 0;
-
- if ((temp >> 9) & 1)
- actual_temp = 0;
- else
- actual_temp = (temp >> 1) & 0xff;
-
- return actual_temp * 1000;
+ int actual_temp;
+
+ if (temp & 0x400)
+ actual_temp = -256;
+ else if (temp & 0x200)
+ actual_temp = 255;
+ else if (temp & 0x100) {
+ actual_temp = temp & 0x1ff;
+ actual_temp |= ~0x1ff;
+ } else
+ actual_temp = temp & 0xff;
+
+ return (actual_temp * 1000) / 2;
}
void rv770_pm_misc(struct radeon_device *rdev)
extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
extern u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
struct timeval *vblanktime);
-extern void drm_handle_vblank(struct drm_device *dev, int crtc);
+extern bool drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
extern void drm_vblank_off(struct drm_device *dev, int crtc);
/**
* drm_crtc_funcs - control CRTCs for a given device
+ * @reset: reset CRTC after state has been invalidate (e.g. resume)
* @dpms: control display power levels
* @save: save CRTC state
* @resore: restore CRTC state
void (*save)(struct drm_crtc *crtc); /* suspend? */
/* Restore CRTC state */
void (*restore)(struct drm_crtc *crtc); /* resume? */
+ /* Reset CRTC state */
+ void (*reset)(struct drm_crtc *crtc);
/* cursor controls */
int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
* @dpms: set power state (see drm_crtc_funcs above)
* @save: save connector state
* @restore: restore connector state
+ * @reset: reset connector after state has been invalidate (e.g. resume)
* @mode_valid: is this mode valid on the given connector?
* @mode_fixup: try to fixup proposed mode for this connector
* @mode_set: set this mode
void (*dpms)(struct drm_connector *connector, int mode);
void (*save)(struct drm_connector *connector);
void (*restore)(struct drm_connector *connector);
+ void (*reset)(struct drm_connector *connector);
/* Check to see if anything is attached to the connector.
* @force is set to false whilst polling, true when checking the
};
struct drm_encoder_funcs {
+ void (*reset)(struct drm_encoder *encoder);
void (*destroy)(struct drm_encoder *encoder);
};
struct drm_display_mode *mode);
extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode);
extern void drm_mode_config_init(struct drm_device *dev);
+extern void drm_mode_config_reset(struct drm_device *dev);
extern void drm_mode_config_cleanup(struct drm_device *dev);
extern void drm_mode_set_name(struct drm_display_mode *mode);
extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2);
{0x1002, 0x4156, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV350}, \
{0x1002, 0x4237, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP}, \
{0x1002, 0x4242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
- {0x1002, 0x4243, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R200}, \
{0x1002, 0x4336, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
{0x1002, 0x4337, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
{0x1002, 0x4437, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS200|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
projects / karo-tx-linux.git / commitdiff