--- /dev/null
+What: /sys/class/scsi_host/hostX/isci_id
+Date: June 2011
+Contact: Dave Jiang <dave.jiang@intel.com>
+Description:
+ This file contains the enumerated host ID for the Intel
+ SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+ Storage Control Unit embeds up to two 4-port controllers in
+ a single PCI device. The controllers are enumerated in order
+ which usually means the lowest number scsi_host corresponds
+ with the first controller, but this association is not
+ guaranteed. The 'isci_id' attribute unambiguously identifies
+ the controller index: '0' for the first controller,
+ '1' for the second.
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M: Intel SCU Linux support <intel-linux-scu@intel.com>
+M: Dan Williams <dan.j.williams@intel.com>
+M: Dave Jiang <dave.jiang@intel.com>
+M: Ed Nadolski <edmund.nadolski@intel.com>
+L: linux-scsi@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S: Maintained
+F: drivers/scsi/isci/
+F: firmware/isci/
+
INTEL IDLE DRIVER
M: Len Brown <lenb@kernel.org>
L: linux-pm@lists.linux-foundation.org
nopout_wqe->itt = ((u16)task->itt |
(ISCSI_TASK_TYPE_MPATH <<
ISCSI_TMF_REQUEST_TYPE_SHIFT));
- nopout_wqe->ttt = nopout_hdr->ttt;
+ nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt);
nopout_wqe->flags = 0;
if (!unsol)
nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
u8 flogi_maddr[ETH_ALEN];
const struct net_device_ops *ops;
+ rtnl_lock();
+
/*
* Don't listen for Ethernet packets anymore.
* synchronize_net() ensures that the packet handlers are not running
" specific feature for LLD.\n");
}
+ rtnl_unlock();
+
/* Release the self-reference taken during fcoe_interface_create() */
fcoe_interface_put(fcoe);
}
fcoe_if_destroy(port->lport);
/* Do not tear down the fcoe interface for NPIV port */
- if (!npiv) {
- rtnl_lock();
+ if (!npiv)
fcoe_interface_cleanup(fcoe);
- rtnl_unlock();
- }
mutex_unlock(&fcoe_config_mutex);
}
printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
netdev->name);
rc = -EIO;
+ rtnl_unlock();
fcoe_interface_cleanup(fcoe);
- goto out_nodev;
+ goto out_nortnl;
}
/* Make this the "master" N_Port */
out_nodev:
rtnl_unlock();
+out_nortnl:
mutex_unlock(&fcoe_config_mutex);
return rc;
}
BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
removed[*nremoved] = h->dev[entry];
(*nremoved)++;
+
+ /*
+ * New physical devices won't have target/lun assigned yet
+ * so we need to preserve the values in the slot we are replacing.
+ */
+ if (new_entry->target == -1) {
+ new_entry->target = h->dev[entry]->target;
+ new_entry->lun = h->dev[entry]->lun;
+ }
+
h->dev[entry] = new_entry;
added[*nadded] = new_entry;
(*nadded)++;
}
static int hpsa_update_device_info(struct ctlr_info *h,
- unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
+ unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
+ unsigned char *is_OBDR_device)
{
-#define OBDR_TAPE_INQ_SIZE 49
+
+#define OBDR_SIG_OFFSET 43
+#define OBDR_TAPE_SIG "$DR-10"
+#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1)
+#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN)
+
unsigned char *inq_buff;
+ unsigned char *obdr_sig;
inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
if (!inq_buff)
else
this_device->raid_level = RAID_UNKNOWN;
+ if (is_OBDR_device) {
+ /* See if this is a One-Button-Disaster-Recovery device
+ * by looking for "$DR-10" at offset 43 in inquiry data.
+ */
+ obdr_sig = &inq_buff[OBDR_SIG_OFFSET];
+ *is_OBDR_device = (this_device->devtype == TYPE_ROM &&
+ strncmp(obdr_sig, OBDR_TAPE_SIG,
+ OBDR_SIG_LEN) == 0);
+ }
+
kfree(inq_buff);
return 0;
return 0;
}
- if (hpsa_update_device_info(h, scsi3addr, this_device))
+ if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
return 0;
(*nmsa2xxx_enclosures)++;
hpsa_set_bus_target_lun(this_device, bus, target, 0);
*/
struct ReportLUNdata *physdev_list = NULL;
struct ReportLUNdata *logdev_list = NULL;
- unsigned char *inq_buff = NULL;
u32 nphysicals = 0;
u32 nlogicals = 0;
u32 ndev_allocated = 0;
GFP_KERNEL);
physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
- inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
- if (!currentsd || !physdev_list || !logdev_list ||
- !inq_buff || !tmpdevice) {
+ if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
dev_err(&h->pdev->dev, "out of memory\n");
goto out;
}
/* adjust our table of devices */
nmsa2xxx_enclosures = 0;
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
- u8 *lunaddrbytes;
+ u8 *lunaddrbytes, is_OBDR = 0;
/* Figure out where the LUN ID info is coming from */
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
continue;
/* Get device type, vendor, model, device id */
- if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice))
+ if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+ &is_OBDR))
continue; /* skip it if we can't talk to it. */
figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun,
tmpdevice);
hpsa_set_bus_target_lun(this_device, bus, target, lun);
switch (this_device->devtype) {
- case TYPE_ROM: {
+ case TYPE_ROM:
/* We don't *really* support actual CD-ROM devices,
* just "One Button Disaster Recovery" tape drive
* which temporarily pretends to be a CD-ROM drive.
* device by checking for "$DR-10" in bytes 43-48 of
* the inquiry data.
*/
- char obdr_sig[7];
-#define OBDR_TAPE_SIG "$DR-10"
- strncpy(obdr_sig, &inq_buff[43], 6);
- obdr_sig[6] = '\0';
- if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
- /* Not OBDR device, ignore it. */
- break;
- }
- ncurrent++;
+ if (is_OBDR)
+ ncurrent++;
break;
case TYPE_DISK:
if (i < nphysicals)
for (i = 0; i < ndev_allocated; i++)
kfree(currentsd[i]);
kfree(currentsd);
- kfree(inq_buff);
kfree(physdev_list);
kfree(logdev_list);
}
break;
case SCU_COMPLETION_TYPE_EVENT:
+ sci_controller_event_completion(ihost, ent);
+ break;
+
case SCU_COMPLETION_TYPE_NOTIFY: {
event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) <<
(SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT);
struct isci_request *request;
struct isci_request *next_request;
struct sas_task *task;
+ u16 active;
INIT_LIST_HEAD(&completed_request_list);
INIT_LIST_HEAD(&errored_request_list);
}
}
+ /* the coalesence timeout doubles at each encoding step, so
+ * update it based on the ilog2 value of the outstanding requests
+ */
+ active = isci_tci_active(ihost);
+ writel(SMU_ICC_GEN_VAL(NUMBER, active) |
+ SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)),
+ &ihost->smu_registers->interrupt_coalesce_control);
}
/**
struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
/* set the default interrupt coalescence number and timeout value. */
- sci_controller_set_interrupt_coalescence(ihost, 0x10, 250);
+ sci_controller_set_interrupt_coalescence(ihost, 0, 0);
}
static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm)
#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
+/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
+#define ISCI_COALESCE_BASE 9
+
/* expander attached sata devices require 3 rnc slots */
static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
{
#include <linux/firmware.h>
#include <linux/efi.h>
#include <asm/string.h>
+#include <scsi/scsi_host.h>
#include "isci.h"
#include "task.h"
#include "probe_roms.h"
+#define MAJ 1
+#define MIN 0
+#define BUILD 0
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+ __stringify(BUILD)
+
+MODULE_VERSION(DRV_VERSION);
+
static struct scsi_transport_template *isci_transport_template;
static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
+static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
+}
+
+static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
+
+struct device_attribute *isci_host_attrs[] = {
+ &dev_attr_isci_id,
+ NULL
+};
+
static struct scsi_host_template isci_sht = {
.module = THIS_MODULE,
.slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
+ .shost_attrs = isci_host_attrs,
};
static struct sas_domain_function_template isci_transport_ops = {
return 0;
}
-static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
- struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
- struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
-}
-
-static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
-
static void isci_unregister(struct isci_host *isci_host)
{
struct Scsi_Host *shost;
return;
shost = isci_host->shost;
- device_remove_file(&shost->shost_dev, &dev_attr_isci_id);
sas_unregister_ha(&isci_host->sas_ha);
if (err)
goto err_shost_remove;
- err = device_create_file(&shost->shost_dev, &dev_attr_isci_id);
- if (err)
- goto err_unregister_ha;
-
return isci_host;
- err_unregister_ha:
- sas_unregister_ha(&(isci_host->sas_ha));
err_shost_remove:
scsi_remove_host(shost);
err_shost:
{
int err;
- pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME);
+ pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
+ DRV_NAME, DRV_VERSION);
isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
if (!isci_transport_template)
u32 parity_count = 0;
u32 llctl, link_rate;
u32 clksm_value = 0;
+ u32 sp_timeouts = 0;
iphy->link_layer_registers = reg;
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
writel(llctl, &iphy->link_layer_registers->link_layer_control);
+ sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+
+ /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
+ sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
+
+ /* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can
+ * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
+ */
+ sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
+
+ writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+
if (is_a2(ihost->pdev)) {
/* Program the max ARB time for the PHY to 700us so we inter-operate with
* the PMC expander which shuts down PHYs if the expander PHY generates too
#define SCU_AFE_XCVRCR_OFFSET 0x00DC
#define SCU_AFE_LUTCR_OFFSET 0x00E0
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT (0UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK (0x000000FFUL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT (8UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK (0x0000FF00UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT (16UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK (0x00FF0000UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT (24UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK (0xFF000000UL)
+
+#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value)
+
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0)
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003)
#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0)
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
return SCI_SUCCESS;
case SCI_REQ_TASK_WAIT_TC_RESP:
+ /* The task frame was already confirmed to have been
+ * sent by the SCU HW. Since the state machine is
+ * now only waiting for the task response itself,
+ * abort the request and complete it immediately
+ * and don't wait for the task response.
+ */
sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
return SCI_SUCCESS;
case SCI_REQ_ABORTING:
- sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
- return SCI_SUCCESS;
+ /* If a request has a termination requested twice, return
+ * a failure indication, since HW confirmation of the first
+ * abort is still outstanding.
+ */
case SCI_REQ_COMPLETED:
default:
dev_warn(&ireq->owning_controller->pdev->dev,
}
}
-static void isci_request_process_stp_response(struct sas_task *task,
- void *response_buffer)
+static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
{
- struct dev_to_host_fis *d2h_reg_fis = response_buffer;
struct task_status_struct *ts = &task->task_status;
struct ata_task_resp *resp = (void *)&ts->buf[0];
- resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6));
- memcpy(&resp->ending_fis[0], response_buffer + 16, 24);
+ resp->frame_len = sizeof(*fis);
+ memcpy(resp->ending_fis, fis, sizeof(*fis));
ts->buf_valid_size = sizeof(*resp);
- /**
- * If the device fault bit is set in the status register, then
+ /* If the device fault bit is set in the status register, then
* set the sense data and return.
*/
- if (d2h_reg_fis->status & ATA_DF)
+ if (fis->status & ATA_DF)
ts->stat = SAS_PROTO_RESPONSE;
else
ts->stat = SAM_STAT_GOOD;
{
struct sas_task *task = isci_request_access_task(request);
struct ssp_response_iu *resp_iu;
- void *resp_buf;
unsigned long task_flags;
struct isci_remote_device *idev = isci_lookup_device(task->dev);
enum service_response response = SAS_TASK_UNDELIVERED;
task);
if (sas_protocol_ata(task->task_proto)) {
- resp_buf = &request->stp.rsp;
- isci_request_process_stp_response(task,
- resp_buf);
+ isci_process_stp_response(task, &request->stp.rsp);
} else if (SAS_PROTOCOL_SSP == task->task_proto) {
/* crack the iu response buffer. */
*/
buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header);
- size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t);
+ size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]);
/*
* The Unsolicited Frame buffers are set at the start of the UF
* starting address of the UF address table.
* 64-bit pointers are required by the hardware.
*/
- dma_addr_t *array;
+ u64 *array;
/**
* This field specifies the physical address location for the UF
*/
error = lport->tt.frame_send(lport, fp);
+ if (fh->fh_type == FC_TYPE_BLS)
+ return error;
+
/*
* Update the exchange and sequence flags,
* assuming all frames for the sequence have been sent.
}
/**
- * fc_seq_exch_abort() - Abort an exchange and sequence
- * @req_sp: The sequence to be aborted
+ * fc_exch_abort_locked() - Abort an exchange
+ * @ep: The exchange to be aborted
* @timer_msec: The period of time to wait before aborting
*
- * Generally called because of a timeout or an abort from the upper layer.
+ * Locking notes: Called with exch lock held
+ *
+ * Return value: 0 on success else error code
*/
-static int fc_seq_exch_abort(const struct fc_seq *req_sp,
- unsigned int timer_msec)
+static int fc_exch_abort_locked(struct fc_exch *ep,
+ unsigned int timer_msec)
{
struct fc_seq *sp;
- struct fc_exch *ep;
struct fc_frame *fp;
int error;
- ep = fc_seq_exch(req_sp);
-
- spin_lock_bh(&ep->ex_lock);
if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) ||
- ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) {
- spin_unlock_bh(&ep->ex_lock);
+ ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP))
return -ENXIO;
- }
/*
* Send the abort on a new sequence if possible.
*/
sp = fc_seq_start_next_locked(&ep->seq);
- if (!sp) {
- spin_unlock_bh(&ep->ex_lock);
+ if (!sp)
return -ENOMEM;
- }
ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL;
if (timer_msec)
fc_exch_timer_set_locked(ep, timer_msec);
- spin_unlock_bh(&ep->ex_lock);
/*
* If not logged into the fabric, don't send ABTS but leave
return error;
}
+/**
+ * fc_seq_exch_abort() - Abort an exchange and sequence
+ * @req_sp: The sequence to be aborted
+ * @timer_msec: The period of time to wait before aborting
+ *
+ * Generally called because of a timeout or an abort from the upper layer.
+ *
+ * Return value: 0 on success else error code
+ */
+static int fc_seq_exch_abort(const struct fc_seq *req_sp,
+ unsigned int timer_msec)
+{
+ struct fc_exch *ep;
+ int error;
+
+ ep = fc_seq_exch(req_sp);
+ spin_lock_bh(&ep->ex_lock);
+ error = fc_exch_abort_locked(ep, timer_msec);
+ spin_unlock_bh(&ep->ex_lock);
+ return error;
+}
+
/**
* fc_exch_timeout() - Handle exchange timer expiration
* @work: The work_struct identifying the exchange that timed out
int rc = 1;
spin_lock_bh(&ep->ex_lock);
+ fc_exch_abort_locked(ep, 0);
ep->state |= FC_EX_RST_CLEANUP;
if (cancel_delayed_work(&ep->timeout_work))
atomic_dec(&ep->ex_refcnt); /* drop hold for timer */
struct fc_exch *ep;
struct fc_seq *sp = NULL;
struct fc_frame_header *fh;
+ struct fc_fcp_pkt *fsp = NULL;
int rc = 1;
ep = fc_exch_alloc(lport, fp);
fc_exch_setup_hdr(ep, fp, ep->f_ctl);
sp->cnt++;
- if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
+ if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) {
+ fsp = fr_fsp(fp);
fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
+ }
if (unlikely(lport->tt.frame_send(lport, fp)))
goto err;
spin_unlock_bh(&ep->ex_lock);
return sp;
err:
- fc_fcp_ddp_done(fr_fsp(fp));
+ if (fsp)
+ fc_fcp_ddp_done(fsp);
rc = fc_exch_done_locked(ep);
spin_unlock_bh(&ep->ex_lock);
if (!rc)
struct fc_fcp_internal *si;
int rc = FAILED;
unsigned long flags;
+ int rval;
+
+ rval = fc_block_scsi_eh(sc_cmd);
+ if (rval)
+ return rval;
lport = shost_priv(sc_cmd->device->host);
if (lport->state != LPORT_ST_READY)
int rc = FAILED;
int rval;
- rval = fc_remote_port_chkready(rport);
+ rval = fc_block_scsi_eh(sc_cmd);
if (rval)
- goto out;
+ return rval;
lport = shost_priv(sc_cmd->device->host);
FC_SCSI_DBG(lport, "Resetting host\n");
+ fc_block_scsi_eh(sc_cmd);
+
lport->tt.lport_reset(lport);
wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
*/
#include <linux/timer.h>
+#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
FCH_EVT_LIPRESET, 0);
fc_vports_linkchange(lport);
fc_lport_reset_locked(lport);
- if (lport->link_up)
+ if (lport->link_up) {
+ /*
+ * Wait upto resource allocation time out before
+ * doing re-login since incomplete FIP exchanged
+ * from last session may collide with exchanges
+ * in new session.
+ */
+ msleep(lport->r_a_tov);
fc_lport_enter_flogi(lport);
+ }
}
/**
fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
}
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
+ int prot = 0;
vha->flags.difdix_supported = 1;
ql_dbg(ql_dbg_user, vha, 0x7082,
"Registered for DIF/DIX type 1 and 3 protection.\n");
+ if (ql2xenabledif == 1)
+ prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(vha->host,
- SHOST_DIF_TYPE1_PROTECTION
+ prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
/*
* Table for showing the current message id in use for particular level
* Change this table for addition of log/debug messages.
- * -----------------------------------------------------
- * | Level | Last Value Used |
- * -----------------------------------------------------
- * | Module Init and Probe | 0x0116 |
- * | Mailbox commands | 0x111e |
- * | Device Discovery | 0x2083 |
- * | Queue Command and IO tracing | 0x302e |
- * | DPC Thread | 0x401c |
- * | Async Events | 0x5059 |
- * | Timer Routines | 0x600d |
- * | User Space Interactions | 0x709c |
- * | Task Management | 0x8043 |
- * | AER/EEH | 0x900f |
- * | Virtual Port | 0xa007 |
- * | ISP82XX Specific | 0xb027 |
- * | MultiQ | 0xc00b |
- * | Misc | 0xd00b |
- * -----------------------------------------------------
+ * ----------------------------------------------------------------------
+ * | Level | Last Value Used | Holes |
+ * ----------------------------------------------------------------------
+ * | Module Init and Probe | 0x0116 | |
+ * | Mailbox commands | 0x1126 | |
+ * | Device Discovery | 0x2083 | |
+ * | Queue Command and IO tracing | 0x302e | 0x3008 |
+ * | DPC Thread | 0x401c | |
+ * | Async Events | 0x5059 | |
+ * | Timer Routines | 0x600d | |
+ * | User Space Interactions | 0x709d | |
+ * | Task Management | 0x8041 | |
+ * | AER/EEH | 0x900f | |
+ * | Virtual Port | 0xa007 | |
+ * | ISP82XX Specific | 0xb04f | |
+ * | MultiQ | 0xc00b | |
+ * | Misc | 0xd00b | |
+ * ----------------------------------------------------------------------
*/
#include "qla_def.h"
#define DT_ISP8021 BIT_14
#define DT_ISP_LAST (DT_ISP8021 << 1)
+#define DT_T10_PI BIT_25
#define DT_IIDMA BIT_26
#define DT_FWI2 BIT_27
#define DT_ZIO_SUPPORTED BIT_28
#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha))
#define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
+#define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI)
#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
#define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
/*
* If DIF Error is set in comp_status, these additional fields are
* defined:
+ *
+ * !!! NOTE: Firmware sends expected/actual DIF data in big endian
+ * format; but all of the "data" field gets swab32-d in the beginning
+ * of qla2x00_status_entry().
+ *
* &data[10] : uint8_t report_runt_bg[2]; - computed guard
* &data[12] : uint8_t actual_dif[8]; - DIF Data received
* &data[20] : uint8_t expected_dif[8]; - DIF Data computed
req = vha->req;
rsp = req->rsp;
- atomic_set(&vha->loop_state, LOOP_UPDATE);
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
if (vha->flags.online) {
if (!(rval = qla2x00_fw_ready(vha))) {
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
- atomic_set(&vha->loop_state, LOOP_UPDATE);
-
/* Issue a marker after FW becomes ready. */
qla2x00_marker(vha, req, rsp, 0, 0,
MK_SYNC_ALL);
fcport->d_id.b.al_pa);
}
}
+
+static inline int
+qla2x00_hba_err_chk_enabled(srb_t *sp)
+{
+ /*
+ * Uncomment when corresponding SCSI changes are done.
+ *
+ if (!sp->cmd->prot_chk)
+ return 0;
+ *
+ */
+
+ switch (scsi_get_prot_op(sp->cmd)) {
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ if (ql2xenablehba_err_chk >= 1)
+ return 1;
+ break;
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ if (ql2xenablehba_err_chk >= 2)
+ return 1;
+ break;
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ return 1;
+ }
+ return 0;
+}
*
*/
static inline void
-qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
+qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
unsigned int protcnt)
{
- struct sd_dif_tuple *spt;
+ struct scsi_cmnd *cmd = sp->cmd;
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
- unsigned char op = scsi_get_prot_op(cmd);
switch (scsi_get_prot_type(cmd)) {
- /* For TYPE 0 protection: no checking */
case SCSI_PROT_DIF_TYPE0:
- pkt->ref_tag_mask[0] = 0x00;
- pkt->ref_tag_mask[1] = 0x00;
- pkt->ref_tag_mask[2] = 0x00;
- pkt->ref_tag_mask[3] = 0x00;
+ /*
+ * No check for ql2xenablehba_err_chk, as it would be an
+ * I/O error if hba tag generation is not done.
+ */
+ pkt->ref_tag = cpu_to_le32((uint32_t)
+ (0xffffffff & scsi_get_lba(cmd)));
+
+ if (!qla2x00_hba_err_chk_enabled(sp))
+ break;
+
+ pkt->ref_tag_mask[0] = 0xff;
+ pkt->ref_tag_mask[1] = 0xff;
+ pkt->ref_tag_mask[2] = 0xff;
+ pkt->ref_tag_mask[3] = 0xff;
break;
/*
* match LBA in CDB + N
*/
case SCSI_PROT_DIF_TYPE2:
- if (!ql2xenablehba_err_chk)
- break;
-
- if (scsi_prot_sg_count(cmd)) {
- spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
- scsi_prot_sglist(cmd)[0].offset;
- pkt->app_tag = swab32(spt->app_tag);
- pkt->app_tag_mask[0] = 0xff;
- pkt->app_tag_mask[1] = 0xff;
- }
+ pkt->app_tag = __constant_cpu_to_le16(0);
+ pkt->app_tag_mask[0] = 0x0;
+ pkt->app_tag_mask[1] = 0x0;
pkt->ref_tag = cpu_to_le32((uint32_t)
(0xffffffff & scsi_get_lba(cmd)));
+ if (!qla2x00_hba_err_chk_enabled(sp))
+ break;
+
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
* 16 bit app tag.
*/
case SCSI_PROT_DIF_TYPE1:
- if (!ql2xenablehba_err_chk)
+ pkt->ref_tag = cpu_to_le32((uint32_t)
+ (0xffffffff & scsi_get_lba(cmd)));
+ pkt->app_tag = __constant_cpu_to_le16(0);
+ pkt->app_tag_mask[0] = 0x0;
+ pkt->app_tag_mask[1] = 0x0;
+
+ if (!qla2x00_hba_err_chk_enabled(sp))
break;
- if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
- op == SCSI_PROT_WRITE_PASS)) {
- spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
- scsi_prot_sglist(cmd)[0].offset;
- ql_dbg(ql_dbg_io, vha, 0x3008,
- "LBA from user %p, lba = 0x%x for cmd=%p.\n",
- spt, (int)spt->ref_tag, cmd);
- pkt->ref_tag = swab32(spt->ref_tag);
- pkt->app_tag_mask[0] = 0x0;
- pkt->app_tag_mask[1] = 0x0;
- } else {
- pkt->ref_tag = cpu_to_le32((uint32_t)
- (0xffffffff & scsi_get_lba(cmd)));
- pkt->app_tag = __constant_cpu_to_le16(0);
- pkt->app_tag_mask[0] = 0x0;
- pkt->app_tag_mask[1] = 0x0;
- }
/* enable ALL bytes of the ref tag */
pkt->ref_tag_mask[0] = 0xff;
pkt->ref_tag_mask[1] = 0xff;
scsi_get_prot_type(cmd), cmd);
}
+struct qla2_sgx {
+ dma_addr_t dma_addr; /* OUT */
+ uint32_t dma_len; /* OUT */
+
+ uint32_t tot_bytes; /* IN */
+ struct scatterlist *cur_sg; /* IN */
+
+ /* for book keeping, bzero on initial invocation */
+ uint32_t bytes_consumed;
+ uint32_t num_bytes;
+ uint32_t tot_partial;
+
+ /* for debugging */
+ uint32_t num_sg;
+ srb_t *sp;
+};
+static int
+qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx,
+ uint32_t *partial)
+{
+ struct scatterlist *sg;
+ uint32_t cumulative_partial, sg_len;
+ dma_addr_t sg_dma_addr;
+
+ if (sgx->num_bytes == sgx->tot_bytes)
+ return 0;
+
+ sg = sgx->cur_sg;
+ cumulative_partial = sgx->tot_partial;
+
+ sg_dma_addr = sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed;
+
+ if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) {
+ sgx->dma_len = (blk_sz - cumulative_partial);
+ sgx->tot_partial = 0;
+ sgx->num_bytes += blk_sz;
+ *partial = 0;
+ } else {
+ sgx->dma_len = sg_len - sgx->bytes_consumed;
+ sgx->tot_partial += sgx->dma_len;
+ *partial = 1;
+ }
+
+ sgx->bytes_consumed += sgx->dma_len;
+
+ if (sg_len == sgx->bytes_consumed) {
+ sg = sg_next(sg);
+ sgx->num_sg++;
+ sgx->cur_sg = sg;
+ sgx->bytes_consumed = 0;
+ }
+
+ return 1;
+}
+
+static int
+qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp,
+ uint32_t *dsd, uint16_t tot_dsds)
+{
+ void *next_dsd;
+ uint8_t avail_dsds = 0;
+ uint32_t dsd_list_len;
+ struct dsd_dma *dsd_ptr;
+ struct scatterlist *sg_prot;
+ uint32_t *cur_dsd = dsd;
+ uint16_t used_dsds = tot_dsds;
+
+ uint32_t prot_int;
+ uint32_t partial;
+ struct qla2_sgx sgx;
+ dma_addr_t sle_dma;
+ uint32_t sle_dma_len, tot_prot_dma_len = 0;
+ struct scsi_cmnd *cmd = sp->cmd;
+
+ prot_int = cmd->device->sector_size;
+
+ memset(&sgx, 0, sizeof(struct qla2_sgx));
+ sgx.tot_bytes = scsi_bufflen(sp->cmd);
+ sgx.cur_sg = scsi_sglist(sp->cmd);
+ sgx.sp = sp;
+
+ sg_prot = scsi_prot_sglist(sp->cmd);
+
+ while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) {
+
+ sle_dma = sgx.dma_addr;
+ sle_dma_len = sgx.dma_len;
+alloc_and_fill:
+ /* Allocate additional continuation packets? */
+ if (avail_dsds == 0) {
+ avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
+ QLA_DSDS_PER_IOCB : used_dsds;
+ dsd_list_len = (avail_dsds + 1) * 12;
+ used_dsds -= avail_dsds;
+
+ /* allocate tracking DS */
+ dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
+ if (!dsd_ptr)
+ return 1;
+
+ /* allocate new list */
+ dsd_ptr->dsd_addr = next_dsd =
+ dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
+ &dsd_ptr->dsd_list_dma);
+
+ if (!next_dsd) {
+ /*
+ * Need to cleanup only this dsd_ptr, rest
+ * will be done by sp_free_dma()
+ */
+ kfree(dsd_ptr);
+ return 1;
+ }
+
+ list_add_tail(&dsd_ptr->list,
+ &((struct crc_context *)sp->ctx)->dsd_list);
+
+ sp->flags |= SRB_CRC_CTX_DSD_VALID;
+
+ /* add new list to cmd iocb or last list */
+ *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
+ *cur_dsd++ = dsd_list_len;
+ cur_dsd = (uint32_t *)next_dsd;
+ }
+ *cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+ *cur_dsd++ = cpu_to_le32(sle_dma_len);
+ avail_dsds--;
+
+ if (partial == 0) {
+ /* Got a full protection interval */
+ sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len;
+ sle_dma_len = 8;
+
+ tot_prot_dma_len += sle_dma_len;
+ if (tot_prot_dma_len == sg_dma_len(sg_prot)) {
+ tot_prot_dma_len = 0;
+ sg_prot = sg_next(sg_prot);
+ }
+
+ partial = 1; /* So as to not re-enter this block */
+ goto alloc_and_fill;
+ }
+ }
+ /* Null termination */
+ *cur_dsd++ = 0;
+ *cur_dsd++ = 0;
+ *cur_dsd++ = 0;
+ return 0;
+}
static int
qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
uint16_t tot_dsds)
struct scsi_cmnd *cmd;
struct scatterlist *cur_seg;
int sgc;
- uint32_t total_bytes;
+ uint32_t total_bytes = 0;
uint32_t data_bytes;
uint32_t dif_bytes;
uint8_t bundling = 1;
__constant_cpu_to_le16(CF_READ_DATA);
}
- tot_prot_dsds = scsi_prot_sg_count(cmd);
- if (!tot_prot_dsds)
+ if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) ||
+ (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT))
bundling = 0;
/* Allocate CRC context from global pool */
INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
- qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *)
+ qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *)
&crc_ctx_pkt->ref_tag, tot_prot_dsds);
cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma));
fcp_cmnd->additional_cdb_len |= 2;
int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
- host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
/* Compute dif len and adjust data len to incude protection */
- total_bytes = data_bytes;
dif_bytes = 0;
blk_size = cmd->device->sector_size;
- if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
- dif_bytes = (data_bytes / blk_size) * 8;
- total_bytes += dif_bytes;
+ dif_bytes = (data_bytes / blk_size) * 8;
+
+ switch (scsi_get_prot_op(sp->cmd)) {
+ case SCSI_PROT_READ_INSERT:
+ case SCSI_PROT_WRITE_STRIP:
+ total_bytes = data_bytes;
+ data_bytes += dif_bytes;
+ break;
+
+ case SCSI_PROT_READ_STRIP:
+ case SCSI_PROT_WRITE_INSERT:
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
+ total_bytes = data_bytes + dif_bytes;
+ break;
+ default:
+ BUG();
}
- if (!ql2xenablehba_err_chk)
+ if (!qla2x00_hba_err_chk_enabled(sp))
fw_prot_opts |= 0x10; /* Disable Guard tag checking */
if (!bundling) {
cmd_pkt->control_flags |=
__constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE);
- if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
+
+ if (!bundling && tot_prot_dsds) {
+ if (qla24xx_walk_and_build_sglist_no_difb(ha, sp,
+ cur_dsd, tot_dsds))
+ goto crc_queuing_error;
+ } else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
(tot_dsds - tot_prot_dsds)))
goto crc_queuing_error;
goto queuing_error;
else
sp->flags |= SRB_DMA_VALID;
+
+ if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+ struct qla2_sgx sgx;
+ uint32_t partial;
+
+ memset(&sgx, 0, sizeof(struct qla2_sgx));
+ sgx.tot_bytes = scsi_bufflen(cmd);
+ sgx.cur_sg = scsi_sglist(cmd);
+ sgx.sp = sp;
+
+ nseg = 0;
+ while (qla24xx_get_one_block_sg(
+ cmd->device->sector_size, &sgx, &partial))
+ nseg++;
+ }
} else
nseg = 0;
goto queuing_error;
else
sp->flags |= SRB_CRC_PROT_DMA_VALID;
+
+ if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+ (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+ nseg = scsi_bufflen(cmd) / cmd->device->sector_size;
+ }
} else {
nseg = 0;
}
/* Build header part of command packet (excluding the OPCODE). */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
+ sp->handle = handle;
sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
vha->flags.rscn_queue_overflow = 1;
}
- atomic_set(&vha->loop_state, LOOP_UPDATE);
atomic_set(&vha->loop_down_timer, 0);
vha->flags.management_server_logged_in = 0;
* ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST
* to indicate to the kernel that the HBA detected error.
*/
-static inline void
+static inline int
qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
{
struct scsi_qla_host *vha = sp->fcport->vha;
struct scsi_cmnd *cmd = sp->cmd;
- struct scsi_dif_tuple *ep =
- (struct scsi_dif_tuple *)&sts24->data[20];
- struct scsi_dif_tuple *ap =
- (struct scsi_dif_tuple *)&sts24->data[12];
+ uint8_t *ap = &sts24->data[12];
+ uint8_t *ep = &sts24->data[20];
uint32_t e_ref_tag, a_ref_tag;
uint16_t e_app_tag, a_app_tag;
uint16_t e_guard, a_guard;
- e_ref_tag = be32_to_cpu(ep->ref_tag);
- a_ref_tag = be32_to_cpu(ap->ref_tag);
- e_app_tag = be16_to_cpu(ep->app_tag);
- a_app_tag = be16_to_cpu(ap->app_tag);
- e_guard = be16_to_cpu(ep->guard);
- a_guard = be16_to_cpu(ap->guard);
+ /*
+ * swab32 of the "data" field in the beginning of qla2x00_status_entry()
+ * would make guard field appear at offset 2
+ */
+ a_guard = le16_to_cpu(*(uint16_t *)(ap + 2));
+ a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0));
+ a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4));
+ e_guard = le16_to_cpu(*(uint16_t *)(ep + 2));
+ e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0));
+ e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4));
ql_dbg(ql_dbg_io, vha, 0x3023,
"iocb(s) %p Returned STATUS.\n", sts24);
cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag,
a_app_tag, e_app_tag, a_guard, e_guard);
+ /*
+ * Ignore sector if:
+ * For type 3: ref & app tag is all 'f's
+ * For type 0,1,2: app tag is all 'f's
+ */
+ if ((a_app_tag == 0xffff) &&
+ ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) ||
+ (a_ref_tag == 0xffffffff))) {
+ uint32_t blocks_done, resid;
+ sector_t lba_s = scsi_get_lba(cmd);
+
+ /* 2TB boundary case covered automatically with this */
+ blocks_done = e_ref_tag - (uint32_t)lba_s + 1;
+
+ resid = scsi_bufflen(cmd) - (blocks_done *
+ cmd->device->sector_size);
+
+ scsi_set_resid(cmd, resid);
+ cmd->result = DID_OK << 16;
+
+ /* Update protection tag */
+ if (scsi_prot_sg_count(cmd)) {
+ uint32_t i, j = 0, k = 0, num_ent;
+ struct scatterlist *sg;
+ struct sd_dif_tuple *spt;
+
+ /* Patch the corresponding protection tags */
+ scsi_for_each_prot_sg(cmd, sg,
+ scsi_prot_sg_count(cmd), i) {
+ num_ent = sg_dma_len(sg) / 8;
+ if (k + num_ent < blocks_done) {
+ k += num_ent;
+ continue;
+ }
+ j = blocks_done - k - 1;
+ k = blocks_done;
+ break;
+ }
+
+ if (k != blocks_done) {
+ qla_printk(KERN_WARNING, sp->fcport->vha->hw,
+ "unexpected tag values tag:lba=%x:%lx)\n",
+ e_ref_tag, lba_s);
+ return 1;
+ }
+
+ spt = page_address(sg_page(sg)) + sg->offset;
+ spt += j;
+
+ spt->app_tag = 0xffff;
+ if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3)
+ spt->ref_tag = 0xffffffff;
+ }
+
+ return 0;
+ }
+
/* check guard */
if (e_guard != a_guard) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
- /* check appl tag */
- if (e_app_tag != a_app_tag) {
+ /* check ref tag */
+ if (e_ref_tag != a_ref_tag) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
- 0x10, 0x2);
+ 0x10, 0x3);
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
- /* check ref tag */
- if (e_ref_tag != a_ref_tag) {
+ /* check appl tag */
+ if (e_app_tag != a_app_tag) {
scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
- 0x10, 0x3);
+ 0x10, 0x2);
set_driver_byte(cmd, DRIVER_SENSE);
set_host_byte(cmd, DID_ABORT);
cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
- return;
+ return 1;
}
+
+ return 1;
}
/**
break;
case CS_DIF_ERROR:
- qla2x00_handle_dif_error(sp, sts24);
+ logit = qla2x00_handle_dif_error(sp, sts24);
break;
default:
cp->result = DID_ERROR << 16;
goto skip_msi;
}
- if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
- !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
+ if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) {
ql_log(ql_log_warn, vha, 0x0035,
"MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n",
- ha->pdev->revision, ha->fw_attributes);
+ ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX);
goto skip_msix;
}
host->can_queue = base_vha->req->length + 128;
host->this_id = 255;
host->cmd_per_lun = 3;
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_82xx __iomem *reg;
+ unsigned long flags;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
ha = rsp->hw;
reg = &ha->iobase->isp82;
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
vha = pci_get_drvdata(ha->pdev);
qla24xx_process_response_queue(vha, rsp);
WRT_REG_DWORD(®->host_int, 0);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
return IRQ_HANDLED;
}
int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
+ /* build FCP_CMND IU */
+ memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
+ int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
+ ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
+
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ ctx->fcp_cmnd->additional_cdb_len |= 1;
+ else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+ ctx->fcp_cmnd->additional_cdb_len |= 2;
+
/*
* Update tagged queuing modifier -- default is TSK_SIMPLE (0).
*/
}
}
- /* build FCP_CMND IU */
- memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
- int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
- ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
-
- if (cmd->sc_data_direction == DMA_TO_DEVICE)
- ctx->fcp_cmnd->additional_cdb_len |= 1;
- else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
- ctx->fcp_cmnd->additional_cdb_len |= 2;
-
memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 +
"Maximum queue depth to report for target devices.");
/* Do not change the value of this after module load */
-int ql2xenabledif = 1;
+int ql2xenabledif = 0;
module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenabledif,
" Enable T10-CRC-DIF "
- " Default is 0 - No DIF Support. 1 - Enable it");
+ " Default is 0 - No DIF Support. 1 - Enable it"
+ ", 2 - Enable DIF for all types, except Type 0.");
-int ql2xenablehba_err_chk;
+int ql2xenablehba_err_chk = 2;
module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xenablehba_err_chk,
- " Enable T10-CRC-DIF Error isolation by HBA"
- " Default is 0 - Error isolation disabled, 1 - Enable it");
+ " Enable T10-CRC-DIF Error isolation by HBA:\n"
+ " Default is 1.\n"
+ " 0 -- Error isolation disabled\n"
+ " 1 -- Error isolation enabled only for DIX Type 0\n"
+ " 2 -- Error isolation enabled for all Types\n");
int ql2xiidmaenable=1;
module_param(ql2xiidmaenable, int, S_IRUGO);
"Abort command mbx success.\n");
wait = 1;
}
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
qla2x00_sp_compl(ha, sp);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ /* Did the command return during mailbox execution? */
+ if (ret == FAILED && !CMD_SP(cmd))
+ ret = SUCCESS;
/* Wait for the command to be returned. */
if (wait) {
host->this_id = 255;
host->cmd_per_lun = 3;
host->unique_id = host->host_no;
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
host->max_cmd_len = 32;
else
host->max_cmd_len = MAX_CMDSZ;
"Detected hba at address=%p.\n",
ha);
- if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+ if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
if (ha->fw_attributes & BIT_4) {
+ int prot = 0;
base_vha->flags.difdix_supported = 1;
ql_dbg(ql_dbg_init, base_vha, 0x00f1,
"Registering for DIF/DIX type 1 and 3 protection.\n");
+ if (ql2xenabledif == 1)
+ prot = SHOST_DIX_TYPE0_PROTECTION;
scsi_host_set_prot(host,
- SHOST_DIF_TYPE1_PROTECTION
+ prot | SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE2_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION
| SHOST_DIX_TYPE1_PROTECTION
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.07.03-k"
+#define QLA2XXX_VERSION "8.03.07.07-k"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
projects / karo-tx-linux.git / commitdiff