unsigned int vcc,
void *priv_data)
{
- int *has_shmem = priv_data;
+ int *priv = priv_data;
+ int try = (*priv & 0x1);
int i;
cistpl_io_t *io = &cfg->io;
i = p_dev->resource[1]->end = 0;
}
- *has_shmem = ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000));
+ *priv &= ((cfg->mem.nwin == 1) &&
+ (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10;
+
p_dev->resource[0]->start = io->win[i].base;
p_dev->resource[0]->end = io->win[i].len;
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!try)
+ p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+ else
+ p_dev->io_lines = 16;
if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
return try_io_port(p_dev);
- return 0;
+ return -EINVAL;
+}
+
+static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
+ int *has_shmem, int try)
+{
+ struct net_device *dev = link->priv;
+ hw_info_t *local_hw_info;
+ pcnet_dev_t *info = PRIV(dev);
+ int priv = try;
+ int ret;
+
+ ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
+ if (ret) {
+ dev_warn(&link->dev, "no useable port range found\n");
+ return NULL;
+ }
+ *has_shmem = (priv & 0x10);
+
+ if (!link->irq)
+ return NULL;
+
+ if (resource_size(link->resource[1]) == 8) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+ if ((link->manf_id == MANFID_IBM) &&
+ (link->card_id == PRODID_IBM_HOME_AND_AWAY))
+ link->conf.ConfigIndex |= 0x10;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ return NULL;
+
+ dev->irq = link->irq;
+ dev->base_addr = link->resource[0]->start;
+
+ if (info->flags & HAS_MISC_REG) {
+ if ((if_port == 1) || (if_port == 2))
+ dev->if_port = if_port;
+ else
+ dev_notice(&link->dev, "invalid if_port requested\n");
+ } else
+ dev->if_port = 0;
+
+ if ((link->conf.ConfigBase == 0x03c0) &&
+ (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
+ dev_info(&link->dev,
+ "this is an AX88190 card - use axnet_cs instead.\n");
+ return NULL;
+ }
+
+ local_hw_info = get_hwinfo(link);
+ if (!local_hw_info)
+ local_hw_info = get_prom(link);
+ if (!local_hw_info)
+ local_hw_info = get_dl10019(link);
+ if (!local_hw_info)
+ local_hw_info = get_ax88190(link);
+ if (!local_hw_info)
+ local_hw_info = get_hwired(link);
+
+ return local_hw_info;
}
static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- int ret, start_pg, stop_pg, cm_offset;
+ int start_pg, stop_pg, cm_offset;
int has_shmem = 0;
hw_info_t *local_hw_info;
dev_dbg(&link->dev, "pcnet_config\n");
- ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
- if (ret)
- goto failed;
-
- if (!link->irq)
- goto failed;
-
- if (resource_size(link->resource[1]) == 8) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
- if ((link->manf_id == MANFID_IBM) &&
- (link->card_id == PRODID_IBM_HOME_AND_AWAY))
- link->conf.ConfigIndex |= 0x10;
-
- ret = pcmcia_request_configuration(link, &link->conf);
- if (ret)
- goto failed;
- dev->irq = link->irq;
- dev->base_addr = link->resource[0]->start;
- if (info->flags & HAS_MISC_REG) {
- if ((if_port == 1) || (if_port == 2))
- dev->if_port = if_port;
- else
- printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
- } else {
- dev->if_port = 0;
- }
-
- if ((link->conf.ConfigBase == 0x03c0) &&
- (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
- printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
- printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
- goto failed;
- }
-
- local_hw_info = get_hwinfo(link);
- if (local_hw_info == NULL)
- local_hw_info = get_prom(link);
- if (local_hw_info == NULL)
- local_hw_info = get_dl10019(link);
- if (local_hw_info == NULL)
- local_hw_info = get_ax88190(link);
- if (local_hw_info == NULL)
- local_hw_info = get_hwired(link);
-
- if (local_hw_info == NULL) {
- printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
- " address for io base %#3lx\n", dev->base_addr);
- goto failed;
+ local_hw_info = pcnet_try_config(link, &has_shmem, 0);
+ if (!local_hw_info) {
+ /* check whether forcing io_lines to 16 helps... */
+ pcmcia_disable_device(link);
+ local_hw_info = pcnet_try_config(link, &has_shmem, 1);
+ if (local_hw_info == NULL) {
+ dev_notice(&link->dev, "unable to read hardware net"
+ " address for io base %#3lx\n", dev->base_addr);
+ goto failed;
+ }
}
info->flags = local_hw_info->flags;
c = p_dev->function_config;
if (!(c->state & CONFIG_LOCKED)) {
- dev_dbg(&s->dev, "Configuration isnt't locked\n");
+ dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
mutex_unlock(&s->ops_mutex);
return -EACCES;
}
s->win[w].card_start = offset;
ret = s->ops->set_mem_map(s, &s->win[w]);
if (ret)
- dev_warn(&s->dev, "failed to set_mem_map\n");
+ dev_warn(&p_dev->dev, "failed to set_mem_map\n");
mutex_unlock(&s->ops_mutex);
return ret;
} /* pcmcia_map_mem_page */
c = p_dev->function_config;
if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&s->dev, "No card present\n");
+ dev_dbg(&p_dev->dev, "No card present\n");
ret = -ENODEV;
goto unlock;
}
if (!(c->state & CONFIG_LOCKED)) {
- dev_dbg(&s->dev, "Configuration isnt't locked\n");
+ dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
ret = -EACCES;
goto unlock;
}
if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) {
- dev_dbg(&s->dev,
+ dev_dbg(&p_dev->dev,
"changing Vcc or IRQ is not allowed at this time\n");
ret = -EINVAL;
goto unlock;
if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
if (mod->Vpp1 != mod->Vpp2) {
- dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
+ dev_dbg(&p_dev->dev,
+ "Vpp1 and Vpp2 must be the same\n");
ret = -EINVAL;
goto unlock;
}
s->socket.Vpp = mod->Vpp1;
if (s->ops->set_socket(s, &s->socket)) {
- dev_printk(KERN_WARNING, &s->dev,
+ dev_printk(KERN_WARNING, &p_dev->dev,
"Unable to set VPP\n");
ret = -EIO;
goto unlock;
}
} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
- dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
+ dev_dbg(&p_dev->dev,
+ "changing Vcc is not allowed at this time\n");
ret = -EINVAL;
goto unlock;
}
win = &s->win[w];
if (!(p_dev->_win & CLIENT_WIN_REQ(w))) {
- dev_dbg(&s->dev, "not releasing unknown window\n");
+ dev_dbg(&p_dev->dev, "not releasing unknown window\n");
mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
return -ENODEV;
if (req->IntType & INT_CARDBUS) {
- dev_dbg(&s->dev, "IntType may not be INT_CARDBUS\n");
+ dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n");
return -EINVAL;
}
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
mutex_unlock(&s->ops_mutex);
- dev_dbg(&s->dev, "Configuration is locked\n");
+ dev_dbg(&p_dev->dev, "Configuration is locked\n");
return -EACCES;
}
s->socket.Vpp = req->Vpp;
if (s->ops->set_socket(s, &s->socket)) {
mutex_unlock(&s->ops_mutex);
- dev_printk(KERN_WARNING, &s->dev,
+ dev_printk(KERN_WARNING, &p_dev->dev,
"Unable to set socket state\n");
return -EINVAL;
}
int ret = -EINVAL;
mutex_lock(&s->ops_mutex);
- dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
+ dev_dbg(&p_dev->dev, "pcmcia_request_io: %pR , %pR",
+ &c->io[0], &c->io[1]);
if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&s->dev, "pcmcia_request_io: No card present\n");
+ dev_dbg(&p_dev->dev, "pcmcia_request_io: No card present\n");
goto out;
}
if (c->state & CONFIG_LOCKED) {
- dev_dbg(&s->dev, "Configuration is locked\n");
+ dev_dbg(&p_dev->dev, "Configuration is locked\n");
goto out;
}
if (c->state & CONFIG_IO_REQ) {
- dev_dbg(&s->dev, "IO already configured\n");
+ dev_dbg(&p_dev->dev, "IO already configured\n");
goto out;
}
c->state |= CONFIG_IO_REQ;
p_dev->_io = 1;
- dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR",
+ dev_dbg(&p_dev->dev, "pcmcia_request_io succeeded: %pR , %pR",
&c->io[0], &c->io[1]);
out:
mutex_unlock(&s->ops_mutex);
int w;
if (!(s->state & SOCKET_PRESENT)) {
- dev_dbg(&s->dev, "No card present\n");
+ dev_dbg(&p_dev->dev, "No card present\n");
return -ENODEV;
}
req->Size = s->map_size;
align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size;
if (req->Size & (s->map_size-1)) {
- dev_dbg(&s->dev, "invalid map size\n");
+ dev_dbg(&p_dev->dev, "invalid map size\n");
return -EINVAL;
}
if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) ||
(req->Base & (align-1))) {
- dev_dbg(&s->dev, "invalid base address\n");
+ dev_dbg(&p_dev->dev, "invalid base address\n");
return -EINVAL;
}
if (req->Base)
if (!(s->state & SOCKET_WIN_REQ(w)))
break;
if (w == MAX_WIN) {
- dev_dbg(&s->dev, "all windows are used already\n");
+ dev_dbg(&p_dev->dev, "all windows are used already\n");
mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
win->res = pcmcia_find_mem_region(req->Base, req->Size, align,
0, s);
if (!win->res) {
- dev_dbg(&s->dev, "allocating mem region failed\n");
+ dev_dbg(&p_dev->dev, "allocating mem region failed\n");
mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
win->card_start = 0;
if (s->ops->set_mem_map(s, win) != 0) {
- dev_dbg(&s->dev, "failed to set memory mapping\n");
+ dev_dbg(&p_dev->dev, "failed to set memory mapping\n");
mutex_unlock(&s->ops_mutex);
return -EIO;
}
if (win->res)
request_resource(&iomem_resource, res);
- dev_dbg(&s->dev, "request_window results in %pR\n", res);
+ dev_dbg(&p_dev->dev, "request_window results in %pR\n", res);
mutex_unlock(&s->ops_mutex);
*wh = res;
info->p_dev = link;
link->priv = info;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[0]->end = 8;
link->conf.Attributes = CONF_ENABLE_IRQ;
if (do_sound) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
/*====================================================================*/
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+ unsigned int port = 0;
+ struct serial_info *info = p_dev->priv;
+
+ if ((p_dev->resource[1]->end != 0) &&
+ (resource_size(p_dev->resource[1]) == 8)) {
+ port = p_dev->resource[1]->start;
+ info->slave = 1;
+ } else if ((info->manfid == MANFID_OSITECH) &&
+ (resource_size(p_dev->resource[0]) == 0x40)) {
+ port = p_dev->resource[0]->start + 0x28;
+ info->slave = 1;
+ }
+ if (info->slave)
+ return setup_serial(p_dev, info, port, p_dev->irq);
+
+ dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+ return -ENODEV;
+}
+
static int simple_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
cistpl_cftable_entry_t *dflt,
struct serial_info *info = link->priv;
int i = -ENODEV, try;
- /* If the card is already configured, look up the port and irq */
- if (link->function_config) {
- unsigned int port = 0;
- if ((link->resource[1]->end != 0) &&
- (resource_size(link->resource[1]) == 8)) {
- port = link->resource[1]->end;
- info->slave = 1;
- } else if ((info->manfid == MANFID_OSITECH) &&
- (resource_size(link->resource[0]) == 0x40)) {
- port = link->resource[0]->start + 0x28;
- info->slave = 1;
- }
- if (info->slave) {
- return setup_serial(link, info, port,
- link->irq);
- }
- }
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ link->resource[0]->end = 8;
/* First pass: look for a config entry that looks normal.
* Two tries: without IO aliases, then with aliases */
if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
goto found_port;
- printk(KERN_NOTICE
- "serial_cs: no usable port range found, giving up\n");
+ dev_warn(&link->dev, "no usable port range found, giving up\n");
return -1;
found_port:
int i, base2 = 0;
/* First, look for a generic full-sized window */
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[0]->end = info->multi * 8;
if (pcmcia_loop_config(link, multi_config_check, &base2)) {
/* If that didn't work, look for two windows */
info->multi = 2;
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
- printk(KERN_NOTICE "serial_cs: no usable port range"
+ dev_warn(&link->dev, "no usable port range "
"found, giving up\n");
return -ENODEV;
}
}
if (!link->irq)
- dev_warn(&link->dev,
- "serial_cs: no usable IRQ found, continuing...\n");
+ dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
/*
* Apply any configuration quirks.
multifunction cards that ask for appropriate IO port ranges */
if ((info->multi == 0) &&
(link->has_func_id) &&
+ (link->socket->pcmcia_pfc == 0) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
(link->func_id == CISTPL_FUNCID_SERIAL)))
pcmcia_loop_config(link, serial_check_for_multi, info);
if (info->quirk && info->quirk->multi != -1)
info->multi = info->quirk->multi;
- if (info->multi > 1)
+ dev_info(&link->dev,
+ "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+ link->manf_id, link->card_id,
+ link->socket->pcmcia_pfc, info->multi, info->quirk);
+ if (link->socket->pcmcia_pfc)
+ i = pfc_config(link);
+ else if (info->multi > 1)
i = multi_config(link);
else
i = simple_config(link);
return 0;
failed:
- dev_warn(&link->dev, "serial_cs: failed to initialize\n");
+ dev_warn(&link->dev, "failed to initialize\n");
serial_remove(link);
return -ENODEV;
}
projects / karo-tx-linux.git / commitdiff