static void __init ams_delta_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static struct map_desc ams_delta_io_desc[] __initdata = {
.reserve = omap_reserve,
.init_irq = ams_delta_init_irq,
.init_machine = ams_delta_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
EXPORT_SYMBOL(ams_delta_latch1_write);
static void __init omap_fsample_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
.reserve = omap_reserve,
.init_irq = omap_fsample_init_irq,
.init_machine = omap_fsample_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init omap_generic_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
/* assume no Mini-AB port */
.reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
.init_machine = omap_generic_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init h2_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static struct omap_usb_config h2_usb_config __initdata = {
.reserve = omap_reserve,
.init_irq = h2_init_irq,
.init_machine = h2_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init h3_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static void __init h3_map_io(void)
.reserve = omap_reserve,
.init_irq = h3_init_irq,
.init_machine = h3_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
{
printk(KERN_INFO "htcherald_init_irq.\n");
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
MACHINE_START(HERALD, "HTC Herald")
.reserve = omap_reserve,
.init_irq = htcherald_init_irq,
.init_machine = htcherald_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init innovator_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
#ifdef CONFIG_ARCH_OMAP15XX
.reserve = omap_reserve,
.init_irq = innovator_init_irq,
.init_machine = innovator_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static const unsigned int nokia770_keymap[] = {
.reserve = omap_reserve,
.init_irq = omap_nokia770_init_irq,
.init_machine = omap_nokia770_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init osk_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static struct omap_usb_config osk_usb_config __initdata = {
.reserve = omap_reserve,
.init_irq = osk_init_irq,
.init_machine = osk_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init omap_palmte_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static const unsigned int palmte_keymap[] = {
.reserve = omap_reserve,
.init_irq = omap_palmte_init_irq,
.init_machine = omap_palmte_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init omap_palmtt_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static struct omap_usb_config palmtt_usb_config __initdata = {
.reserve = omap_reserve,
.init_irq = omap_palmtt_init_irq,
.init_machine = omap_palmtt_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
omap_palmz71_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static const unsigned int palmz71_keymap[] = {
.reserve = omap_reserve,
.init_irq = omap_palmz71_init_irq,
.init_machine = omap_palmz71_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init omap_perseus2_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
.reserve = omap_reserve,
.init_irq = omap_perseus2_init_irq,
.init_machine = omap_perseus2_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init omap_sx1_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
/*----------------------------------------*/
.reserve = omap_reserve,
.init_irq = omap_sx1_init_irq,
.init_machine = omap_sx1_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
static void __init voiceblue_init_irq(void)
{
omap1_init_common_hw();
- omap_init_irq();
+ omap1_init_irq();
}
static void __init voiceblue_map_io(void)
.reserve = omap_reserve,
.init_irq = voiceblue_init_irq,
.init_machine = voiceblue_init,
- .timer = &omap_timer,
+ .timer = &omap1_timer,
MACHINE_END
.irq_set_wake = omap_wake_irq,
};
-void __init omap_init_irq(void)
+void __init omap1_init_irq(void)
{
int i, j;
* On 1510, 1610 and 1710, McBSP1 and McBSP3
* are DSP public peripherals.
*/
- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+ if (id == 0 || id == 2) {
if (dsp_use++ == 0) {
api_clk = clk_get(NULL, "api_ck");
dsp_clk = clk_get(NULL, "dsp_ck");
static void omap1_mcbsp_free(unsigned int id)
{
- if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
+ if (id == 0 || id == 2) {
if (--dsp_use == 0) {
if (!IS_ERR(api_clk)) {
clk_disable(api_clk);
* Timer initialization
* ---------------------------------------------------------------------------
*/
-static void __init omap_timer_init(void)
+static void __init omap1_timer_init(void)
{
if (omap_32k_timer_usable()) {
preferred_sched_clock_init(1);
}
}
-struct sys_timer omap_timer = {
- .init = omap_timer_init,
+struct sys_timer omap1_timer = {
+ .init = omap1_timer_init,
};
bool __init omap_32k_timer_init(void)
{
omap_init_clocksource_32k();
-
-#ifdef CONFIG_OMAP_DM_TIMER
- omap_dm_timer_init();
-#endif
omap_init_32k_timer();
return true;
select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
- bool "CompuLab CM-T35 module"
+ bool "CompuLab CM-T35/CM-T3730 modules"
depends on ARCH_OMAP3
default y
+ select MACH_CM_T3730
select OMAP_PACKAGE_CUS
config MACH_CM_T3517
default y
select OMAP_PACKAGE_CBB
+config MACH_CM_T3730
+ bool
+
config MACH_IGEP0020
bool "IGEP v2 board"
depends on ARCH_OMAP3
#
# Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o
omap-2-3-common = irq.o sdrc.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
-obj-y += common-board-devices.o
+obj-y += common-board-devices.o twl-common.o
.reserve = omap_reserve,
.map_io = omap_2430sdp_map_io,
.init_early = omap_2430sdp_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
- .timer = &omap_timer,
+ .timer = &omap2_timer,
MACHINE_END
omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
}
-static int sdp3430_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
-8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
-5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
-4040, 3910, 3790, 3670, 3550
-};
-
-static struct twl4030_bci_platform_data sdp3430_bci_data = {
- .battery_tmp_tbl = sdp3430_batt_table,
- .tblsize = ARRAY_SIZE(sdp3430_batt_table),
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.setup = sdp3430_twl_gpio_setup,
};
-static struct twl4030_usb_data sdp3430_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_madc_platform_data sdp3430_madc_data = {
- .irq_line = 1,
-};
-
/* regulator consumer mappings */
/* ads7846 on SPI */
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
-static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
.consumer_supplies = sdp3430_vsim_supplies,
};
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data sdp3430_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies),
- .consumer_supplies = sdp3430_vdda_dac_supplies,
-};
-
-static struct regulator_init_data sdp3430_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
- .consumer_supplies = sdp3430_vpll2_supplies,
-};
-
-static struct twl4030_codec_audio_data sdp3430_audio;
-
-static struct twl4030_codec_data sdp3430_codec = {
- .audio_mclk = 26000000,
- .audio = &sdp3430_audio,
-};
-
static struct twl4030_platform_data sdp3430_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .bci = &sdp3430_bci_data,
.gpio = &sdp3430_gpio_data,
- .madc = &sdp3430_madc_data,
.keypad = &sdp3430_kp_data,
- .usb = &sdp3430_usb_data,
- .codec = &sdp3430_codec,
.vaux1 = &sdp3430_vaux1,
.vaux2 = &sdp3430_vaux2,
.vmmc1 = &sdp3430_vmmc1,
.vmmc2 = &sdp3430_vmmc2,
.vsim = &sdp3430_vsim,
- .vdac = &sdp3430_vdac,
- .vpll2 = &sdp3430_vpll2,
};
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
+ omap3_pmic_get_config(&sdp3430_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+ TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+ sdp3430_twldata.vdac->constraints.apply_uV = true;
+ sdp3430_twldata.vpll2->constraints.apply_uV = true;
+ sdp3430_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("twl4030", &sdp3430_twldata);
+
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
omap_register_i2c_bus(2, 400, NULL, 0);
/* i2c3 on display connector (for DVI, tfp410) */
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_3430sdp_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_sdp_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
#include <linux/i2c/twl.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
+#include <linux/wl12xx.h>
#include "mux.h"
#include "hsmmc.h"
-#include "timer-gp.h"
#include "control.h"
#include "common-board-devices.h"
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define GPIO_WIFI_PMENA 54
+#define GPIO_WIFI_IRQ 53
+
static const int sdp4430_keymap[] = {
KEY(0, 0, KEY_E),
KEY(0, 1, KEY_R),
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
+static struct omap_device_pad keypad_pads[] __initdata = {
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col1.kpd_col1",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col2.kpd_col2",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col3.kpd_col3",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col4.kpd_col4",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_col5.kpd_col5",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a23.kpd_col7",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "gpmc_a22.kpd_col6",
+ .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
+ },
+ { .name = "kpd_row0.kpd_row0",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row1.kpd_row1",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row2.kpd_row2",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row3.kpd_row3",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row4.kpd_row4",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "kpd_row5.kpd_row5",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a18.kpd_row6",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+ { .name = "gpmc_a19.kpd_row7",
+ .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
+ OMAP_MUX_MODE1 | OMAP_INPUT_EN,
+ },
+};
static struct matrix_keymap_data sdp4430_keymap_data = {
.keymap = sdp4430_keymap,
.rows = 8,
.cols = 8,
};
+
+static struct omap_board_data keypad_data = {
+ .id = 1,
+ .pads = keypad_pads,
+ .pads_cnt = ARRAY_SIZE(keypad_pads),
+};
+
static struct gpio_led sdp4430_gpio_leds[] = {
{
.name = "omap4:green:debug0",
{
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
-#ifdef CONFIG_OMAP_32K_TIMER
- omap2_gp_clockevent_set_gptimer(1);
-#endif
}
static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
-static struct twl4030_usb_data omap4_usbphy_data = {
- .phy_init = omap4430_phy_init,
- .phy_exit = omap4430_phy_exit,
- .phy_power = omap4430_phy_power,
- .phy_set_clock = omap4430_phy_set_clk,
- .phy_suspend = omap4430_phy_suspend,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 2,
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+ .gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
+ {
+ .mmc = 5,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .ocr_mask = MMC_VDD_165_195,
+ .nonremovable = true,
+ },
{} /* Terminator */
};
static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
- {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.1",
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
+
+static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
+ .supply = "vmmc",
+ .dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data sdp4430_vmmc5 = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
};
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
- {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.0",
+
+static struct fixed_voltage_config sdp4430_vwlan = {
+ .supply_name = "vwl1271",
+ .microvolts = 1800000, /* 1.8V */
+ .gpio = GPIO_WIFI_PMENA,
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+ .init_data = &sdp4430_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdp4430_vwlan,
},
};
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
+ .num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply),
.consumer_supplies = sdp4430_vaux_supply,
};
-static struct regulator_init_data sdp4430_vaux2 = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_vaux3 = {
- .constraints = {
- .min_uV = 1000000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data sdp4430_vmmc = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = sdp4430_vmmc_supply,
-};
-
-static struct regulator_init_data sdp4430_vpp = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 2500000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
static struct regulator_init_data sdp4430_vusim = {
.constraints = {
.min_uV = 1200000,
},
};
-static struct regulator_init_data sdp4430_vana = {
- .constraints = {
- .min_uV = 2100000,
- .max_uV = 2100000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_vcxio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_vusb = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data sdp4430_clk32kg = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
static struct twl4030_platform_data sdp4430_twldata = {
- .irq_base = TWL6030_IRQ_BASE,
- .irq_end = TWL6030_IRQ_END,
-
/* Regulators */
- .vmmc = &sdp4430_vmmc,
- .vpp = &sdp4430_vpp,
.vusim = &sdp4430_vusim,
- .vana = &sdp4430_vana,
- .vcxio = &sdp4430_vcxio,
- .vdac = &sdp4430_vdac,
- .vusb = &sdp4430_vusb,
.vaux1 = &sdp4430_vaux1,
- .vaux2 = &sdp4430_vaux2,
- .vaux3 = &sdp4430_vaux3,
- .clk32kg = &sdp4430_clk32kg,
- .usb = &omap4_usbphy_data
};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
};
static int __init omap4_i2c_init(void)
{
+ omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
+ TWL_COMMON_REGULATOR_VDAC |
+ TWL_COMMON_REGULATOR_VAUX2 |
+ TWL_COMMON_REGULATOR_VAUX3 |
+ TWL_COMMON_REGULATOR_VMMC |
+ TWL_COMMON_REGULATOR_VPP |
+ TWL_COMMON_REGULATOR_VANA |
+ TWL_COMMON_REGULATOR_VCXIO |
+ TWL_COMMON_REGULATOR_VUSB |
+ TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
}
#endif
+static void omap4_sdp4430_wifi_mux_init(void)
+{
+ omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
+ OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
+
+ omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
+ OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
+
+}
+
+static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
+ .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+ .board_ref_clock = WL12XX_REFCLOCK_26,
+ .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
+};
+
+static void omap4_sdp4430_wifi_init(void)
+{
+ omap4_sdp4430_wifi_mux_init();
+ if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
+ pr_err("Error setting wl12xx data\n");
+ platform_device_register(&omap_vwlan_device);
+}
+
static void __init omap_4430sdp_init(void)
{
int status;
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
ARRAY_SIZE(sdp4430_spi_board_info));
}
- status = omap4_keyboard_init(&sdp4430_keypad_data);
+ status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
.init_early = omap_4430sdp_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
- .timer = &omap_timer,
+ .timer = &omap4_timer,
MACHINE_END
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_crane_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_evm_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
.reserve = omap_reserve,
.map_io = omap_apollon_map_io,
.init_early = omap_apollon_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
- .timer = &omap_timer,
+ .timer = &omap2_timer,
MACHINE_END
/*
- * board-cm-t35.c (CompuLab CM-T35 module)
+ * CompuLab CM-T35/CM-T3730 modules support
*
- * Copyright (C) 2009 CompuLab, Ltd.
- * Author: Mike Rapoport <mike@compulab.co.il>
+ * Copyright (C) 2009-2011 CompuLab, Ltd.
+ * Authors: Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
*/
#include <linux/kernel.h>
},
{
.name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
.size = 32 * NAND_BLOCK_SIZE,
},
{
.name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
.size = MTDPART_SIZ_FULL,
},
};
static struct omap_nand_platform_data cm_t35_nand_data = {
.parts = cm_t35_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
-
};
static void __init cm_t35_init_nand(void)
}
}
-static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply cm_t35_vsim_supply = {
- .supply = "vmmc_aux",
+static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply cm_t35_vdac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply cm_t35_vdvi_supply =
- REGULATOR_SUPPLY("vdvi", "omapdss");
+static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
+ REGULATOR_SUPPLY("vdvi", "omapdss"),
+};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data cm_t35_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply),
+ .consumer_supplies = cm_t35_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data cm_t35_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data cm_t35_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cm_t35_vdvi_supply,
-};
-
-static struct twl4030_usb_data cm_t35_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
+ .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply),
+ .consumer_supplies = cm_t35_vsim_supply,
};
static uint32_t cm_t35_keymap[] = {
if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) {
gpio_export(wlan_rst, 0);
udelay(10);
- gpio_set_value(wlan_rst, 0);
+ gpio_set_value_cansleep(wlan_rst, 0);
udelay(10);
- gpio_set_value(wlan_rst, 1);
+ gpio_set_value_cansleep(wlan_rst, 1);
} else {
pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
}
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- cm_t35_vmmc1_supply.dev = mmc[0].dev;
- cm_t35_vsim_supply.dev = mmc[0].dev;
-
return 0;
}
};
static struct twl4030_platform_data cm_t35_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.keypad = &cm_t35_kp_data,
- .usb = &cm_t35_usb_data,
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
- .vdac = &cm_t35_vdac,
- .vpll2 = &cm_t35_vpll2,
};
static void __init cm_t35_init_i2c(void)
{
+ omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ cm_t35_twldata.vpll2->constraints.name = "VDVI";
+ cm_t35_twldata.vpll2->num_consumer_supplies =
+ ARRAY_SIZE(cm_t35_vdvi_supply);
+ cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
+
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
- /* DSS */
+ /* common DSS */
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
- OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
+
+static void __init cm_t3x_common_dss_mux_init(int mux_mode)
+{
+ omap_mux_init_signal("dss_data18", mux_mode);
+ omap_mux_init_signal("dss_data19", mux_mode);
+ omap_mux_init_signal("dss_data20", mux_mode);
+ omap_mux_init_signal("dss_data21", mux_mode);
+ omap_mux_init_signal("dss_data22", mux_mode);
+ omap_mux_init_signal("dss_data23", mux_mode);
+}
+
+static void __init cm_t35_init_mux(void)
+{
+ omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+ cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
+}
+
+static void __init cm_t3730_init_mux(void)
+{
+ omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+ cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
+}
+#else
+static inline void cm_t35_init_mux(void) {}
+static inline void cm_t3730_init_mux(void) {}
#endif
static struct omap_board_config_kernel cm_t35_config[] __initdata = {
};
-static void __init cm_t35_init(void)
+static void __init cm_t3x_common_init(void)
{
omap_board_config = cm_t35_config;
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
- cm_t35_init_nand();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
cm_t35_init_led();
usbhs_init(&usbhs_bdata);
}
+static void __init cm_t35_init(void)
+{
+ cm_t3x_common_init();
+ cm_t35_init_mux();
+ cm_t35_init_nand();
+}
+
+static void __init cm_t3730_init(void)
+{
+ cm_t3x_common_init();
+ cm_t3730_init_mux();
+}
+
MACHINE_START(CM_T35, "Compulab CM-T35")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t35_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
+MACHINE_END
+
+MACHINE_START(CM_T3730, "Compulab CM-T3730")
+ .boot_params = 0x80000100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = cm_t35_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = cm_t3730_init,
+ .timer = &omap3_timer,
MACHINE_END
static struct omap_nand_platform_data cm_t3517_nand_data = {
.parts = cm_t3517_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions),
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
};
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t3517_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
#include "mux.h"
#include "hsmmc.h"
-#include "timer-gp.h"
#include "common-board-devices.h"
#define OMAP_DM9000_GPIO_IRQ 25
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
-static struct regulator_consumer_supply devkit8000_vmmc1_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
-
+static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
/* ads7846 on SPI */
-static struct regulator_consumer_supply devkit8000_vio_supply =
- REGULATOR_SUPPLY("vcc", "spi2.0");
+static struct regulator_consumer_supply devkit8000_vio_supply[] = {
+ REGULATOR_SUPPLY("vcc", "spi2.0"),
+};
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
.default_device = &devkit8000_lcd_device,
};
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_1),
KEY(1, 0, KEY_2),
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &devkit8000_vmmc1_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data devkit8000_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &devkit8000_vdda_dac_supply,
+ .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply),
+ .consumer_supplies = devkit8000_vmmc1_supply,
};
/* VPLL1 for digital video outputs */
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &devkit8000_vio_supply,
-};
-
-static struct twl4030_usb_data devkit8000_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data devkit8000_audio_data;
-
-static struct twl4030_codec_data devkit8000_codec_data = {
- .audio_mclk = 26000000,
- .audio = &devkit8000_audio_data,
+ .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply),
+ .consumer_supplies = devkit8000_vio_supply,
};
static struct twl4030_platform_data devkit8000_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &devkit8000_usb_data,
.gpio = &devkit8000_gpio_data,
- .codec = &devkit8000_codec_data,
.vmmc1 = &devkit8000_vmmc1,
- .vdac = &devkit8000_vdac,
.vpll1 = &devkit8000_vpll1,
.vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
static int __init devkit8000_i2c_init(void)
{
+ omap3_pmic_get_config(&devkit8000_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC);
omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
static void __init devkit8000_init_irq(void)
{
- omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
- omap2_gp_clockevent_set_gptimer(12);
-#endif
+ omap3_init_irq();
}
#define OMAP_DM9000_BASE 0x2c000000
.init_early = devkit8000_init_early,
.init_irq = devkit8000_init_irq,
.init_machine = devkit8000_init,
- .timer = &omap_timer,
+ .timer = &omap3_secure_timer,
MACHINE_END
};
static struct omap_nand_platform_data board_nand_data = {
- .nand_setup = NULL,
.gpmc_t = &nand_timings,
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
- .dev_ready = NULL,
- .devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */
};
void
.reserve = omap_reserve,
.map_io = omap_generic_map_io,
.init_early = omap_generic_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
static void __init omap_h4_init_irq(void)
{
- omap_init_irq();
+ omap2_init_irq();
}
static struct at24_platform_data m24c01 = {
.init_early = omap_h4_init_early,
.init_irq = omap_h4_init_irq,
.init_machine = omap_h4_init,
- .timer = &omap_timer,
+ .timer = &omap2_timer,
MACHINE_END
static inline void __init igep2_init_smsc911x(void) { }
#endif
-static struct regulator_consumer_supply igep_vmmc1_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply igep_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &igep_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply),
+ .consumer_supplies = igep_vmmc1_supply,
};
-static struct regulator_consumer_supply igep_vio_supply =
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+static struct regulator_consumer_supply igep_vio_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
static struct regulator_init_data igep_vio = {
.constraints = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &igep_vio_supply,
+ .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply),
+ .consumer_supplies = igep_vio_supply,
};
-static struct regulator_consumer_supply igep_vmmc2_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply igep_vmmc2_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
static struct regulator_init_data igep_vmmc2 = {
.constraints = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &igep_vmmc2_supply,
+ .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply),
+ .consumer_supplies = igep_vmmc2_supply,
};
static struct fixed_voltage_config igep_vwlan = {
.setup = igep_twl_gpio_setup,
};
-static struct twl4030_usb_data igep_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static int igep2_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
.default_device = &igep2_dvi_device,
};
-static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data igep2_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies),
- .consumer_supplies = igep2_vpll2_supplies,
-};
-
static void __init igep2_display_init(void)
{
int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
m65kxxxxam_sdrc_params);
}
-static struct twl4030_codec_audio_data igep2_audio_data;
-
-static struct twl4030_codec_data igep2_codec_data = {
- .audio_mclk = 26000000,
- .audio = &igep2_audio_data,
-};
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
};
static struct twl4030_platform_data igep_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &igep_usb_data,
.gpio = &igep_twl4030_gpio_pdata,
.vmmc1 = &igep_vmmc1,
.vio = &igep_vio,
{
int ret;
+ omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
+
if (machine_is_igep0020()) {
/*
* Bus 3 is attached to the DVI port where devices like the
if (ret)
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
- igep_twldata.codec = &igep2_codec_data;
igep_twldata.keypad = &igep2_keypad_pdata;
- igep_twldata.vpll2 = &igep2_vpll2;
+ /* Get common pmic data */
+ omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VPLL2);
+ igep_twldata.vpll2->constraints.apply_uV = true;
+ igep_twldata.vpll2->constraints.name = "VDVI";
}
omap3_pmic_init("twl4030", &igep_twldata);
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = igep_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = igep_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
omap2_init_common_devices(NULL, NULL);
}
-static struct twl4030_usb_data ldp_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
-static struct twl4030_madc_platform_data ldp_madc_data = {
- .irq_line = 1,
-};
-
-static struct regulator_consumer_supply ldp_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &ldp_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply),
+ .consumer_supplies = ldp_vmmc1_supply,
};
/* ads7846 on SPI */
};
static struct twl4030_platform_data ldp_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .madc = &ldp_madc_data,
- .usb = &ldp_usb_data,
.vmmc1 = &ldp_vmmc1,
.vaux1 = &ldp_vaux1,
.gpio = &ldp_gpio_data,
static int __init omap_i2c_init(void)
{
+ omap3_pmic_get_config(&ldp_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
omap3_pmic_init("twl4030", &ldp_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- ldp_vmmc1_supply.dev = mmc[0].dev;
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_ldp_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
- .timer = &omap_timer,
+ .timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
- .timer = &omap_timer,
+ .timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
- .timer = &omap_timer,
+ .timer = &omap2_timer,
MACHINE_END
#include "mux.h"
#include "hsmmc.h"
-#include "timer-gp.h"
#include "pm.h"
#include "common-board-devices.h"
* AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
* C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
* C4 = GPIO173, GPIO172, GPIO171: 1 0 1
- * XM = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
+ * XMC = GPIO173, GPIO172, GPIO171: 0 1 0
*/
enum {
OMAP3BEAGLE_BOARD_UNKN = 0,
OMAP3BEAGLE_BOARD_C1_3,
OMAP3BEAGLE_BOARD_C4,
OMAP3BEAGLE_BOARD_XM,
+ OMAP3BEAGLE_BOARD_XMC,
};
static u8 omap3_beagle_version;
-static u8 omap3_beagle_get_rev(void)
-{
- return omap3_beagle_version;
-}
+/*
+ * Board-specific configuration
+ * Defaults to BeagleBoard-xMC
+ */
+static struct {
+ int mmc1_gpio_wp;
+ int usb_pwr_level;
+ int reset_gpio;
+ int usr_button_gpio;
+} beagle_config = {
+ .mmc1_gpio_wp = -EINVAL,
+ .usb_pwr_level = GPIOF_OUT_INIT_LOW,
+ .reset_gpio = 129,
+ .usr_button_gpio = 4,
+};
static struct gpio omap3_beagle_rev_gpios[] __initdata = {
{ 171, GPIOF_IN, "rev_id_0" },
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+ beagle_config.mmc1_gpio_wp = 29;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+ beagle_config.mmc1_gpio_wp = 23;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+ beagle_config.mmc1_gpio_wp = 23;
+ beagle_config.reset_gpio = 170;
+ beagle_config.usr_button_gpio = 7;
break;
case 0:
- printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+ beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
+ break;
+ case 2:
+ printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
+ omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
break;
default:
printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
.default_device = &beagle_dvi_device,
};
-static struct regulator_consumer_supply beagle_vdac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
static void __init beagle_display_init(void)
{
int r;
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 29,
+ .gpio_wp = -EINVAL,
},
{} /* Terminator */
};
-static struct regulator_consumer_supply beagle_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply beagle_vsim_supply = {
- .supply = "vmmc_aux",
+static struct regulator_consumer_supply beagle_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int r, usb_pwr_level;
-
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- mmc[0].gpio_wp = -EINVAL;
- } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
- (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- mmc[0].gpio_wp = 23;
- } else {
- omap_mux_init_gpio(29, OMAP_PIN_INPUT);
- }
+ int r;
+
+ if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+ mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- beagle_vmmc1_supply.dev = mmc[0].dev;
- beagle_vsim_supply.dev = mmc[0].dev;
-
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
* high / others active low)
* DVI reset GPIO is different between beagle revisions
*/
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
- usb_pwr_level = GPIOF_OUT_INIT_HIGH;
- beagle_dvi_device.reset_gpio = 129;
+ /* Valid for all -xM revisions */
+ if (cpu_is_omap3630()) {
/*
* gpio + 1 on Xm controls the TFP410's enable line (active low)
* gpio + 2 control varies depending on the board rev as below:
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
} else {
- usb_pwr_level = GPIOF_OUT_INIT_LOW;
- beagle_dvi_device.reset_gpio = 170;
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
+ beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
- gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
+ gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
+ "nEN_USB_PWR");
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply),
+ .consumer_supplies = beagle_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data beagle_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &beagle_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data beagle_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies),
- .consumer_supplies = beagle_vdvi_supplies,
-};
-
-static struct twl4030_usb_data beagle_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data beagle_audio_data;
-
-static struct twl4030_codec_data beagle_codec_data = {
- .audio_mclk = 26000000,
- .audio = &beagle_audio_data,
+ .num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply),
+ .consumer_supplies = beagle_vsim_supply,
};
static struct twl4030_platform_data beagle_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
- .codec = &beagle_codec_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
- .vdac = &beagle_vdac,
- .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
static int __init omap3_beagle_i2c_init(void)
{
+ omap3_pmic_get_config(&beagle_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ beagle_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
static struct gpio_keys_button gpio_buttons[] = {
{
.code = BTN_EXTRA,
- .gpio = 7,
+ /* Dynamically assigned depending on board */
+ .gpio = -EINVAL,
.desc = "user",
.wakeup = 1,
},
static void __init omap3_beagle_init_irq(void)
{
- omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
- omap2_gp_clockevent_set_gptimer(12);
-#endif
+ omap3_init_irq();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
return;
}
- /* Custom OPP enabled for XM */
- if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ /* Custom OPP enabled for all xM versions */
+ if (cpu_is_omap3630()) {
struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
struct omap_hwmod *dh = omap_hwmod_lookup("iva");
struct device *dev;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
omap3_beagle_i2c_init();
+
+ gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
+
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
.init_early = omap3_beagle_init_early,
.init_irq = omap3_beagle_init_irq,
.init_machine = omap3_beagle_init,
- .timer = &omap_timer,
+ .timer = &omap3_secure_timer,
MACHINE_END
.default_device = &omap3_evm_lcd_device,
};
-static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply omap3evm_vsim_supply = {
- .supply = "vmmc_aux",
+static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply),
+ .consumer_supplies = omap3evm_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vsim_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply),
+ .consumer_supplies = omap3evm_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- omap3evm_vmmc1_supply.dev = mmc[0].dev;
- omap3evm_vsim_supply.dev = mmc[0].dev;
-
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
.setup = omap3evm_twl_gpio_setup,
};
-static struct twl4030_usb_data omap3evm_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
.rep = 1,
};
-static struct twl4030_madc_platform_data omap3evm_madc_data = {
- .irq_line = 1,
-};
-
-static struct twl4030_codec_audio_data omap3evm_audio_data;
-
-static struct twl4030_codec_data omap3evm_codec_data = {
- .audio_mclk = 26000000,
- .audio = &omap3evm_audio_data,
-};
-
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_evm_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3_evm_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_evm_vpll2 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies),
- .consumer_supplies = omap3_evm_vpll2_supplies,
-};
-
/* ads7846 on SPI */
-static struct regulator_consumer_supply omap3evm_vio_supply =
- REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply omap3evm_vio_supply[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
/* VIO for ads7846 */
static struct regulator_init_data omap3evm_vio = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vio_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply),
+ .consumer_supplies = omap3evm_vio_supply,
};
#ifdef CONFIG_WL12XX_PLATFORM_DATA
#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
-static struct regulator_consumer_supply omap3evm_vmmc2_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
/* VMMC2 for driving the WL12xx module */
static struct regulator_init_data omap3evm_vmmc2 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vmmc2_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply),
+ .consumer_supplies = omap3evm_vmmc2_supply,
};
static struct fixed_voltage_config omap3evm_vwlan = {
#endif
static struct twl4030_platform_data omap3evm_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
- .madc = &omap3evm_madc_data,
- .usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
- .codec = &omap3evm_codec_data,
- .vdac = &omap3_evm_vdac,
- .vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
static int __init omap3_evm_i2c_init(void)
{
+ omap3_pmic_get_config(&omap3evm_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ omap3evm_twldata.vdac->constraints.apply_uV = true;
+ omap3evm_twldata.vpll2->constraints.apply_uV = true;
+
omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_evm_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
#include "mux.h"
#include "hsmmc.h"
-#include "timer-gp.h"
#include "control.h"
#include "common-board-devices.h"
#define OMAP3_TORPEDO_MMC_GPIO_CD 127
#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129
-static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3logic_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply),
+ .consumer_supplies = omap3logic_vmmc1_supply,
};
static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
}
omap2_hsmmc_init(board_mmc_info);
- /* link regulators to MMC adapters */
- omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
}
static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
.setup = omap3pandora_twl_gpio_setup,
};
-static struct regulator_consumer_supply pandora_vmmc1_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
-
-static struct regulator_consumer_supply pandora_vmmc2_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
-static struct regulator_consumer_supply pandora_vmmc3_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
+static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
+};
-static struct regulator_consumer_supply pandora_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
+static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
+};
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
-static struct regulator_consumer_supply pandora_vcc_lcd_supply =
- REGULATOR_SUPPLY("vcc", "display0");
+static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
+ REGULATOR_SUPPLY("vcc", "display0"),
+};
-static struct regulator_consumer_supply pandora_usb_phy_supply =
- REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
+ REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
+};
/* ads7846 on SPI and 2 nub controllers on I2C */
static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
REGULATOR_SUPPLY("vcc", "3-0067"),
};
-static struct regulator_consumer_supply pandora_adac_supply =
- REGULATOR_SUPPLY("vcc", "soc-audio");
+static struct regulator_consumer_supply pandora_adac_supply[] = {
+ REGULATOR_SUPPLY("vcc", "soc-audio"),
+};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data pandora_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply),
+ .consumer_supplies = pandora_vmmc1_supply,
};
/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_vmmc2_supply,
-};
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data pandora_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data pandora_vpll2 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
- .consumer_supplies = pandora_vdds_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply),
+ .consumer_supplies = pandora_vmmc2_supply,
};
/* VAUX1 for LCD */
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_vcc_lcd_supply,
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply),
+ .consumer_supplies = pandora_vcc_lcd_supply,
};
/* VAUX2 for USB host PHY */
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_usb_phy_supply,
+ .num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply),
+ .consumer_supplies = pandora_usb_phy_supply,
};
/* VAUX4 for ads7846 and nubs */
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_adac_supply,
+ .num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply),
+ .consumer_supplies = pandora_adac_supply,
};
/* Fixed regulator internal to Wifi module */
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &pandora_vmmc3_supply,
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
+ .consumer_supplies = pandora_vmmc3_supply,
};
static struct fixed_voltage_config pandora_vwlan = {
},
};
-static struct twl4030_usb_data omap3pandora_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data omap3pandora_audio_data;
-
-static struct twl4030_codec_data omap3pandora_codec_data = {
- .audio_mclk = 26000000,
- .audio = &omap3pandora_audio_data,
-};
-
static struct twl4030_bci_platform_data pandora_bci_data;
static struct twl4030_platform_data omap3pandora_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
- .usb = &omap3pandora_usb_data,
- .codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
- .vdac = &pandora_vdac,
- .vpll2 = &pandora_vpll2,
.vaux1 = &pandora_vaux1,
.vaux2 = &pandora_vaux2,
.vaux4 = &pandora_vaux4,
static int __init omap3pandora_i2c_init(void)
{
+ omap3_pmic_get_config(&omap3pandora_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ omap3pandora_twldata.vdac->constraints.apply_uV = true;
+
+ omap3pandora_twldata.vpll2->constraints.apply_uV = true;
+ omap3pandora_twldata.vpll2->num_consumer_supplies =
+ ARRAY_SIZE(pandora_vdds_supplies);
+ omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
+
omap3_pmic_init("tps65950", &omap3pandora_twldata);
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3pandora_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
-#include "timer-gp.h"
#include "common-board-devices.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
.default_device = &omap3_stalker_dvi_device,
};
-static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply omap3stalker_vsim_supply = {
- .supply = "vmmc_aux",
+static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3stalker_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply),
+ .consumer_supplies = omap3stalker_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3stalker_vsim_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply),
+ .consumer_supplies = omap3stalker_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- omap3stalker_vmmc1_supply.dev = mmc[0].dev;
- omap3stalker_vsim_supply.dev = mmc[0].dev;
-
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
.setup = omap3stalker_twl_gpio_setup,
};
-static struct twl4030_usb_data omap3stalker_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
.rep = 1,
};
-static struct twl4030_madc_platform_data omap3stalker_madc_data = {
- .irq_line = 1,
-};
-
-static struct twl4030_codec_audio_data omap3stalker_audio_data;
-
-static struct twl4030_codec_data omap3stalker_codec_data = {
- .audio_mclk = 26000000,
- .audio = &omap3stalker_audio_data,
-};
-
-static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_stalker_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3_stalker_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_stalker_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies),
- .consumer_supplies = omap3_stalker_vpll2_supplies,
-};
-
static struct twl4030_platform_data omap3stalker_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.keypad = &omap3stalker_kp_data,
- .madc = &omap3stalker_madc_data,
- .usb = &omap3stalker_usb_data,
.gpio = &omap3stalker_gpio_data,
- .codec = &omap3stalker_codec_data,
- .vdac = &omap3_stalker_vdac,
- .vpll2 = &omap3_stalker_vpll2,
.vmmc1 = &omap3stalker_vmmc1,
.vsim = &omap3stalker_vsim,
};
static int __init omap3_stalker_i2c_init(void)
{
+ omap3_pmic_get_config(&omap3stalker_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ omap3stalker_twldata.vdac->constraints.apply_uV = true;
+ omap3stalker_twldata.vpll2->constraints.apply_uV = true;
+ omap3stalker_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("twl4030", &omap3stalker_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
static void __init omap3_stalker_init_irq(void)
{
- omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
- omap2_gp_clockevent_set_gptimer(12);
-#endif
+ omap3_init_irq();
}
static struct platform_device *omap3_stalker_devices[] __initdata = {
.init_early = omap3_stalker_init_early,
.init_irq = omap3_stalker_init_irq,
.init_machine = omap3_stalker_init,
- .timer = &omap_timer,
+ .timer = &omap3_secure_timer,
MACHINE_END
#include "mux.h"
#include "hsmmc.h"
-#include "timer-gp.h"
#include "common-board-devices.h"
#include <asm/setup.h>
.ctrl_name = "internal",
};
-static struct regulator_consumer_supply touchbook_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply touchbook_vsim_supply = {
- .supply = "vmmc_aux",
+static struct regulator_consumer_supply touchbook_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct gpio_led gpio_leds[];
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters */
- touchbook_vmmc1_supply.dev = mmc[0].dev;
- touchbook_vsim_supply.dev = mmc[0].dev;
-
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
.setup = touchbook_twl_gpio_setup,
};
-static struct regulator_consumer_supply touchbook_vdac_supply = {
+static struct regulator_consumer_supply touchbook_vdac_supply[] = {
+{
.supply = "vdac",
.dev = &omap3_touchbook_lcd_device.dev,
+},
};
-static struct regulator_consumer_supply touchbook_vdvi_supply = {
+static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
+{
.supply = "vdvi",
.dev = &omap3_touchbook_lcd_device.dev,
+},
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply),
+ .consumer_supplies = touchbook_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vsim_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data touchbook_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vdac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data touchbook_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &touchbook_vdvi_supply,
-};
-
-static struct twl4030_usb_data touchbook_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
-static struct twl4030_codec_audio_data touchbook_audio_data;
-
-static struct twl4030_codec_data touchbook_codec_data = {
- .audio_mclk = 26000000,
- .audio = &touchbook_audio_data,
+ .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply),
+ .consumer_supplies = touchbook_vsim_supply,
};
static struct twl4030_platform_data touchbook_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .usb = &touchbook_usb_data,
.gpio = &touchbook_gpio_data,
- .codec = &touchbook_codec_data,
.vmmc1 = &touchbook_vmmc1,
.vsim = &touchbook_vsim,
- .vdac = &touchbook_vdac,
- .vpll2 = &touchbook_vpll2,
};
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
static int __init omap3_touchbook_i2c_init(void)
{
/* Standard TouchBook bus */
- omap3_pmic_init("twl4030", &touchbook_twldata);
+ omap3_pmic_get_config(&touchbook_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ touchbook_twldata.vdac->num_consumer_supplies =
+ ARRAY_SIZE(touchbook_vdac_supply);
+ touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
+ touchbook_twldata.vpll2->constraints.name = "VDVI";
+ touchbook_twldata.vpll2->num_consumer_supplies =
+ ARRAY_SIZE(touchbook_vdvi_supply);
+ touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
+
+ omap3_pmic_init("twl4030", &touchbook_twldata);
/* Additional TouchBook bus */
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
ARRAY_SIZE(touchBook_i2c_boardinfo));
static void __init omap3_touchbook_init_irq(void)
{
- omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
- omap2_gp_clockevent_set_gptimer(12);
-#endif
+ omap3_init_irq();
}
static struct platform_device *omap3_touchbook_devices[] __initdata = {
.init_early = omap3_touchbook_init_early,
.init_irq = omap3_touchbook_init_irq,
.init_machine = omap3_touchbook_init,
- .timer = &omap_timer,
+ .timer = &omap3_secure_timer,
MACHINE_END
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-generic-dpi.h>
-#include "timer-gp.h"
#include "hsmmc.h"
#include "control.h"
.power = 100,
};
-static struct twl4030_usb_data omap4_usbphy_data = {
- .phy_init = omap4430_phy_init,
- .phy_exit = omap4430_phy_exit,
- .phy_power = omap4430_phy_power,
- .phy_set_clock = omap4430_phy_set_clk,
- .phy_suspend = omap4430_phy_suspend,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
{} /* Terminator */
};
-static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
- {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.0",
- },
-};
-
-static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.4",
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
};
static struct regulator_init_data panda_vmmc5 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap4_panda_vmmc5_supply,
+ .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
+ .consumer_supplies = omap4_panda_vmmc5_supply,
};
static struct fixed_voltage_config panda_vwlan = {
return 0;
}
-static struct regulator_init_data omap4_panda_vaux2 = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vaux3 = {
- .constraints = {
- .min_uV = 1000000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VMMC1 for MMC1 card */
-static struct regulator_init_data omap4_panda_vmmc = {
- .constraints = {
- .min_uV = 1200000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = omap4_panda_vmmc_supply,
-};
-
-static struct regulator_init_data omap4_panda_vpp = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 2500000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vana = {
- .constraints = {
- .min_uV = 2100000,
- .max_uV = 2100000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vcxio = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_vusb = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct regulator_init_data omap4_panda_clk32kg = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
-};
-
-static struct twl4030_platform_data omap4_panda_twldata = {
- .irq_base = TWL6030_IRQ_BASE,
- .irq_end = TWL6030_IRQ_END,
-
- /* Regulators */
- .vmmc = &omap4_panda_vmmc,
- .vpp = &omap4_panda_vpp,
- .vana = &omap4_panda_vana,
- .vcxio = &omap4_panda_vcxio,
- .vdac = &omap4_panda_vdac,
- .vusb = &omap4_panda_vusb,
- .vaux2 = &omap4_panda_vaux2,
- .vaux3 = &omap4_panda_vaux3,
- .clk32kg = &omap4_panda_clk32kg,
- .usb = &omap4_usbphy_data,
-};
+/* Panda board uses the common PMIC configuration */
+static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
static int __init omap4_panda_i2c_init(void)
{
+ omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
+ TWL_COMMON_REGULATOR_VDAC |
+ TWL_COMMON_REGULATOR_VAUX2 |
+ TWL_COMMON_REGULATOR_VAUX3 |
+ TWL_COMMON_REGULATOR_VMMC |
+ TWL_COMMON_REGULATOR_VPP |
+ TWL_COMMON_REGULATOR_VANA |
+ TWL_COMMON_REGULATOR_VCXIO |
+ TWL_COMMON_REGULATOR_VUSB |
+ TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
.init_early = omap4_panda_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
- .timer = &omap_timer,
+ .timer = &omap4_timer,
MACHINE_END
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
/* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply =
- REGULATOR_SUPPLY("vcc", "spi1.0");
+static struct regulator_consumer_supply ads7846_supply[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+};
static struct regulator_init_data vads7846_regulator = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &ads7846_supply,
+ .num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
+ .consumer_supplies = ads7846_supply,
};
static struct fixed_voltage_config vads7846 = {
.default_device = &overo_dvi_device,
};
-static struct regulator_consumer_supply overo_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
{} /* Terminator */
};
-static struct regulator_consumer_supply overo_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply overo_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
{
omap2_hsmmc_init(mmc);
- overo_vmmc1_supply.dev = mmc[0].dev;
-
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
.setup = overo_twl_gpio_setup,
};
-static struct twl4030_usb_data overo_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct regulator_init_data overo_vmmc1 = {
.constraints = {
.min_uV = 1850000,
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &overo_vmmc1_supply,
-};
-
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data overo_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &overo_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data overo_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
- .consumer_supplies = overo_vdds_dsi_supply,
-};
-
-static struct twl4030_codec_audio_data overo_audio_data;
-
-static struct twl4030_codec_data overo_codec_data = {
- .audio_mclk = 26000000,
- .audio = &overo_audio_data,
+ .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
+ .consumer_supplies = overo_vmmc1_supply,
};
static struct twl4030_platform_data overo_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
- .usb = &overo_usb_data,
- .codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
- .vdac = &overo_vdac,
- .vpll2 = &overo_vpll2,
};
static int __init overo_i2c_init(void)
{
+ omap3_pmic_get_config(&overo_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ overo_twldata.vpll2->constraints.name = "VDVI";
+
omap3_pmic_init("tps65950", &overo_twldata);
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
- overo_ads7846_init();
overo_init_smsc911x();
overo_display_init();
overo_init_led();
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = overo_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = overo_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
-static struct twl4030_usb_data rm680_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_platform_data rm680_twl_data = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
.gpio = &rm680_gpio_data,
- .usb = &rm680_usb_data,
/* add rest of the children here */
};
static void __init rm680_i2c_init(void)
{
+ omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
.reserve = omap_reserve,
.map_io = rm680_map_io,
.init_early = rm680_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = rm680_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
#include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
+#include <linux/leds-lp5523.h>
#include <../drivers/staging/iio/light/tsl2563.h>
#define RX51_WL1251_IRQ_GPIO 42
#define RX51_FMTX_RESET_GPIO 163
#define RX51_FMTX_IRQ 53
+#define RX51_LP5523_CHIP_EN_GPIO 41
#define RX51_USB_TRANSCEIVER_RST_GPIO 67
};
#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+static struct lp5523_led_config rx51_lp5523_led_config[] = {
+ {
+ .chan_nr = 0,
+ .led_current = 50,
+ }, {
+ .chan_nr = 1,
+ .led_current = 50,
+ }, {
+ .chan_nr = 2,
+ .led_current = 50,
+ }, {
+ .chan_nr = 3,
+ .led_current = 50,
+ }, {
+ .chan_nr = 4,
+ .led_current = 50,
+ }, {
+ .chan_nr = 5,
+ .led_current = 50,
+ }, {
+ .chan_nr = 6,
+ .led_current = 50,
+ }, {
+ .chan_nr = 7,
+ .led_current = 50,
+ }, {
+ .chan_nr = 8,
+ .led_current = 50,
+ }
+};
+
+static int rx51_lp5523_setup(void)
+{
+ return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
+ "lp5523_enable");
+}
+
+static void rx51_lp5523_release(void)
+{
+ gpio_free(RX51_LP5523_CHIP_EN_GPIO);
+}
+
+static void rx51_lp5523_enable(bool state)
+{
+ gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
+}
+
+static struct lp5523_platform_data rx51_lp5523_platform_data = {
+ .led_config = rx51_lp5523_led_config,
+ .num_channels = ARRAY_SIZE(rx51_lp5523_led_config),
+ .clock_mode = LP5523_CLOCK_AUTO,
+ .setup_resources = rx51_lp5523_setup,
+ .release_resources = rx51_lp5523_release,
+ .enable = rx51_lp5523_enable,
+};
+#endif
+
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
.rep = 1,
};
-static struct twl4030_madc_platform_data rx51_madc_data = {
- .irq_line = 1,
-};
-
/* Enable input logic and pull all lines up when eMMC is on. */
static struct omap_board_mux rx51_mmc2_on_mux[] = {
OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
{} /* Terminator */
};
-static struct regulator_consumer_supply rx51_vmmc1_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
+static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
-static struct regulator_consumer_supply rx51_vaux3_supply =
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
+static struct regulator_consumer_supply rx51_vaux3_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
+};
-static struct regulator_consumer_supply rx51_vsim_supply =
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
+static struct regulator_consumer_supply rx51_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
+};
static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
/* tlv320aic3x analog supplies */
REGULATOR_SUPPLY("vdd", "2-0063"),
};
-static struct regulator_consumer_supply rx51_vdac_supply[] = {
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &rx51_vaux3_supply,
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply),
+ .consumer_supplies = rx51_vaux3_supply,
};
static struct regulator_init_data rx51_vaux4 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &rx51_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply),
+ .consumer_supplies = rx51_vmmc1_supply,
};
static struct regulator_init_data rx51_vmmc2 = {
.consumer_supplies = rx51_vmmc2_supplies,
};
-static struct regulator_init_data rx51_vsim = {
+static struct regulator_init_data rx51_vpll1 = {
.constraints = {
- .name = "VMMC2_IO_18",
+ .name = "VPLL",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
+ .always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vpll2 = {
+ .constraints = {
+ .name = "VSDI_CSI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &rx51_vsim_supply,
};
-static struct regulator_init_data rx51_vdac = {
+static struct regulator_init_data rx51_vsim = {
.constraints = {
- .name = "VDAC",
+ .name = "VMMC2_IO_18",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = rx51_vdac_supply,
+ .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply),
+ .consumer_supplies = rx51_vsim_supply,
};
static struct regulator_init_data rx51_vio = {
.consumer_supplies = rx51_vio_supplies,
};
+static struct regulator_init_data rx51_vintana1 = {
+ .constraints = {
+ .name = "VINTANA1",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintana2 = {
+ .constraints = {
+ .name = "VINTANA2",
+ .min_uV = 2750000,
+ .max_uV = 2750000,
+ .apply_uV = true,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
+static struct regulator_init_data rx51_vintdig = {
+ .constraints = {
+ .name = "VINTDIG",
+ .min_uV = 1500000,
+ .max_uV = 1500000,
+ .always_on = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE,
+ },
+};
+
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
.setup = rx51_twlgpio_setup,
};
-static struct twl4030_usb_data rx51_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_ins sleep_on_seq[] __initdata = {
/*
* Turn off everything
};
static struct twl4030_platform_data rx51_twldata __initdata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
- .madc = &rx51_madc_data,
- .usb = &rx51_usb_data,
.power = &rx51_t2scripts_data,
.codec = &rx51_codec_data,
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
+ .vpll1 = &rx51_vpll1,
+ .vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
- .vdac = &rx51_vdac,
+ .vintana1 = &rx51_vintana1,
+ .vintana2 = &rx51_vintana2,
+ .vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
I2C_BOARD_INFO("tsl2563", 0x29),
.platform_data = &rx51_tsl2563_platform_data,
},
+#endif
+#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
+ {
+ I2C_BOARD_INFO("lp5523", 0x32),
+ .platform_data = &rx51_lp5523_platform_data,
+ },
#endif
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
rx51_twldata.vaux3 = &rx51_vaux3_cam;
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
+ omap3_pmic_get_config(&rx51_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
+ TWL_COMMON_REGULATOR_VDAC);
+
+ rx51_twldata.vdac->constraints.apply_uV = true;
+ rx51_twldata.vdac->constraints.name = "VDAC";
+
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
+ regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
board_smc91x_init();
rx51_add_gpio_keys();
.reserve = rx51_reserve,
.map_io = rx51_map_io,
.init_early = rx51_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = rx51_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
omap2_init_common_devices(NULL, NULL);
}
-static void __init ti8168_evm_init_irq(void)
-{
- omap_init_irq();
-}
-
static void __init ti8168_evm_init(void)
{
omap_serial_init();
.boot_params = 0x80000100,
.map_io = ti8168_evm_map_io,
.init_early = ti8168_init_early,
- .init_irq = ti8168_evm_init_irq,
- .timer = &omap_timer,
+ .init_irq = ti816x_init_irq,
+ .timer = &omap3_timer,
.init_machine = ti8168_evm_init,
MACHINE_END
#define ZOOM_SMSC911X_GPIO 158
#define ZOOM_QUADUART_CS 3
#define ZOOM_QUADUART_GPIO 102
+#define ZOOM_QUADUART_RST_GPIO 152
#define QUART_CLK 1843200
#define DEBUG_BASE 0x08000000
#define ZOOM_ETHR_START DEBUG_BASE
unsigned long cs_mem_base;
int quart_gpio = 0;
+ if (gpio_request_one(ZOOM_QUADUART_RST_GPIO,
+ GPIOF_OUT_INIT_LOW,
+ "TL16CP754C GPIO") < 0) {
+ pr_err("Failed to request GPIO%d for TL16CP754C\n",
+ ZOOM_QUADUART_RST_GPIO);
+ return;
+ }
+
quart_cs = ZOOM_QUADUART_CS;
if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
.rep = 1,
};
-static struct regulator_consumer_supply zoom_vmmc1_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply zoom_vsim_supply = {
- .supply = "vmmc_aux",
+static struct regulator_consumer_supply zoom_vsim_supply[] = {
+ REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
-static struct regulator_consumer_supply zoom_vmmc2_supply = {
- .supply = "vmmc",
+static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
-static struct regulator_consumer_supply zoom_vmmc3_supply = {
- .supply = "vmmc",
- .dev_name = "omap_hsmmc.2",
+static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vmmc1_supply,
+ .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc1_supply),
+ .consumer_supplies = zoom_vmmc1_supply,
};
/* VMMC2 for MMC2 card */
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vmmc2_supply,
+ .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc2_supply),
+ .consumer_supplies = zoom_vmmc2_supply,
};
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vsim_supply,
+ .num_consumer_supplies = ARRAY_SIZE(zoom_vsim_supply),
+ .consumer_supplies = zoom_vsim_supply,
};
static struct regulator_init_data zoom_vmmc3 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vmmc3_supply,
+ .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc3_supply),
+ .consumer_supplies = zoom_vmmc3_supply,
};
static struct fixed_voltage_config zoom_vwlan = {
{} /* Terminator */
};
-static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_consumer_supply zoom_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
-static struct regulator_init_data zoom_vpll2 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies),
- .consumer_supplies = zoom_vpll2_supplies,
-};
-
-static struct regulator_init_data zoom_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &zoom_vdda_dac_supply,
-};
-
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters ... we "know" the
- * regulators will be set up only *after* we return.
- */
- zoom_vmmc1_supply.dev = mmc[0].dev;
- zoom_vsim_supply.dev = mmc[0].dev;
- zoom_vmmc2_supply.dev = mmc[1].dev;
-
ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
"lcd enable");
if (ret)
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
}
-static int zoom_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
-8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
-5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
-4040, 3910, 3790, 3670, 3550
-};
-
-static struct twl4030_bci_platform_data zoom_bci_data = {
- .battery_tmp_tbl = zoom_batt_table,
- .tblsize = ARRAY_SIZE(zoom_batt_table),
-};
-
-static struct twl4030_usb_data zoom_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.setup = zoom_twl_gpio_setup,
};
-static struct twl4030_madc_platform_data zoom_madc_data = {
- .irq_line = 1,
-};
-
-static struct twl4030_codec_audio_data zoom_audio_data;
-
-static struct twl4030_codec_data zoom_codec_data = {
- .audio_mclk = 26000000,
- .audio = &zoom_audio_data,
-};
-
static struct twl4030_platform_data zoom_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
- .bci = &zoom_bci_data,
- .madc = &zoom_madc_data,
- .usb = &zoom_usb_data,
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
- .codec = &zoom_codec_data,
.vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
- .vpll2 = &zoom_vpll2,
- .vdac = &zoom_vdac,
};
static int __init omap_i2c_init(void)
{
+ omap3_pmic_get_config(&zoom_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
+ TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
if (machine_is_omap_zoom2()) {
- zoom_audio_data.ramp_delay_value = 3; /* 161 ms */
- zoom_audio_data.hs_extmute = 1;
- zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+ struct twl4030_codec_audio_data *audio_data;
+ audio_data = zoom_twldata.codec->audio;
+
+ audio_data->ramp_delay_value = 3; /* 161 ms */
+ audio_data->hs_extmute = 1;
+ audio_data->set_hs_extmute = zoom2_set_hs_extmute;
}
omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END
if (IS_ERR_VALUE(r)) {
WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
mpurate_ck->name, mpurate, r);
+ clk_put(mpurate_ck);
return -EINVAL;
}
*
*/
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <plat/i2c.h>
#include <plat/mcspi.h>
#include <plat/nand.h>
#include "common-board-devices.h"
-static struct i2c_board_info __initdata pmic_i2c_board_info = {
- .addr = 0x48,
- .flags = I2C_CLIENT_WAKE,
-};
-
-void __init omap_pmic_init(int bus, u32 clkrate,
- const char *pmic_type, int pmic_irq,
- struct twl4030_platform_data *pmic_data)
-{
- strncpy(pmic_i2c_board_info.type, pmic_type,
- sizeof(pmic_i2c_board_info.type));
- pmic_i2c_board_info.irq = pmic_irq;
- pmic_i2c_board_info.platform_data = pmic_data;
-
- omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
-}
-
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data = {
- .dma_channel = -1, /* disable DMA in OMAP NAND driver */
-};
+static struct omap_nand_platform_data nand_data;
void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
int nr_parts)
nand_data.cs = nandcs;
nand_data.parts = parts;
nand_data.nr_parts = nr_parts;
- nand_data.options = options;
+ nand_data.devsize = options;
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
if (gpmc_nand_init(&nand_data) < 0)
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
+#include "twl-common.h"
+
#define NAND_BLOCK_SIZE SZ_128K
-struct twl4030_platform_data;
struct mtd_partition;
-
-void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
- struct twl4030_platform_data *pmic_data);
-
-static inline void omap2_pmic_init(const char *pmic_type,
- struct twl4030_platform_data *pmic_data)
-{
- omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
-}
-
-static inline void omap3_pmic_init(const char *pmic_type,
- struct twl4030_platform_data *pmic_data)
-{
- omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
-}
-
-static inline void omap4_pmic_init(const char *pmic_type,
- struct twl4030_platform_data *pmic_data)
-{
- /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
- omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
-
struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
};
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
- *sdp4430_keypad_data)
+ *sdp4430_keypad_data, struct omap_board_data *bdata)
{
struct omap_device *od;
struct omap_hwmod *oh;
name, oh->name);
return PTR_ERR(od);
}
+ oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
return 0;
}
#include <plat/board.h>
#include <plat/gpmc.h>
-static struct omap_nand_platform_data *gpmc_nand_data;
-
static struct resource gpmc_nand_resource = {
.flags = IORESOURCE_MEM,
};
.resource = &gpmc_nand_resource,
};
-static int omap2_nand_gpmc_retime(void)
+static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
{
struct gpmc_timings t;
int err;
return 0;
}
-int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
{
int err = 0;
struct device *dev = &gpmc_nand_device.dev;
- gpmc_nand_data = _nand_data;
- gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime;
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
}
/* Set timings in GPMC */
- err = omap2_nand_gpmc_retime();
+ err = omap2_nand_gpmc_retime(gpmc_nand_data);
if (err < 0) {
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
#include <plat/omap-pm.h>
static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
- if ((mmc_controller->slots[0].switch_pin > 0) && \
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+ if (gpio_is_valid(mmc_controller->slots[0].switch_pin))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
- if ((mmc_controller->slots[0].gpio_wp > 0) && \
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+ if (gpio_is_valid(mmc_controller->slots[0].gpio_wp))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
+/* See irq.c, omap4-common.c and entry-macro.S */
void __iomem *omap_irq_base;
-/*
- * Initialize asm_irq_base for entry-macro.S
- */
-static inline void omap_irq_base_init(void)
-{
- if (cpu_is_omap24xx())
- omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
- else if (cpu_is_omap34xx())
- omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
- else if (cpu_is_omap44xx())
- omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
- else
- pr_err("Could not initialize omap_irq_base\n");
-}
-
void __init omap2_init_common_infrastructure(void)
{
u8 postsetup_state;
_omap2_init_reprogram_sdrc();
}
- omap_irq_base_init();
}
/*
attr = e->mixed << 5;
attr |= e->endian;
attr |= e->elsz >> 3;
- attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
-
+ attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) ||
+ (e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6);
return attr;
}
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
-void __init omap_init_irq(void)
+static void __init omap_init_irq(u32 base, int nr_irqs)
{
unsigned long nr_of_irqs = 0;
unsigned int nr_banks = 0;
int i, j;
+ omap_irq_base = ioremap(base, SZ_4K);
+ if (WARN_ON(!omap_irq_base))
+ return;
+
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
- unsigned long base = 0;
struct omap_irq_bank *bank = irq_banks + i;
- if (cpu_is_omap24xx())
- base = OMAP24XX_IC_BASE;
- else if (cpu_is_omap34xx())
- base = OMAP34XX_IC_BASE;
-
- BUG_ON(!base);
-
- if (cpu_is_ti816x())
- bank->nr_irqs = 128;
+ bank->nr_irqs = nr_irqs;
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
}
+void __init omap2_init_irq(void)
+{
+ omap_init_irq(OMAP24XX_IC_BASE, 96);
+}
+
+void __init omap3_init_irq(void)
+{
+ omap_init_irq(OMAP34XX_IC_BASE, 96);
+}
+
+void __init ti816x_init_irq(void)
+{
+ omap_init_irq(OMAP34XX_IC_BASE, 128);
+}
+
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
.pdata = {
.name = "ducati",
.nr_tlb_entries = 32,
- .clk_name = "ducati_ick",
+ .clk_name = "ipu_fck",
.da_start = 0x0,
.da_end = 0xFFFFF000,
},
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
+#include <plat/irqs.h>
+
#include <mach/hardware.h>
#include <mach/omap4-common.h>
void __init gic_init_irq(void)
{
- void __iomem *gic_cpu_base;
-
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!gic_dist_base_addr);
/* Static mapping, never released */
- gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
- BUG_ON(!gic_cpu_base);
+ omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+ BUG_ON(!omap_irq_base);
- gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
+ gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
}
#ifdef CONFIG_CACHE_L2X0
#include "prm2xxx_3xxx.h"
#include "pm.h"
-int omap2_pm_debug;
u32 enable_off_mode;
-u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
-
-#define DUMP_PRM_MOD_REG(mod, reg) \
- regs[reg_count].name = #mod "." #reg; \
- regs[reg_count++].val = omap2_prm_read_mod_reg(mod, reg)
-#define DUMP_CM_MOD_REG(mod, reg) \
- regs[reg_count].name = #mod "." #reg; \
- regs[reg_count++].val = omap2_cm_read_mod_reg(mod, reg)
-#define DUMP_PRM_REG(reg) \
- regs[reg_count].name = #reg; \
- regs[reg_count++].val = __raw_readl(reg)
-#define DUMP_CM_REG(reg) \
- regs[reg_count].name = #reg; \
- regs[reg_count++].val = __raw_readl(reg)
-#define DUMP_INTC_REG(reg, off) \
- regs[reg_count].name = #reg; \
- regs[reg_count++].val = \
- __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
-
-void omap2_pm_dump(int mode, int resume, unsigned int us)
-{
- struct reg {
- const char *name;
- u32 val;
- } regs[32];
- int reg_count = 0, i;
- const char *s1 = NULL, *s2 = NULL;
-
- if (!resume) {
-#if 0
- /* MPU */
- DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
- DUMP_CM_MOD_REG(MPU_MOD, OMAP2_CM_CLKSTCTRL);
- DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTCTRL);
- DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTST);
- DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
-#endif
-#if 0
- /* INTC */
- DUMP_INTC_REG(INTC_MIR0, 0x0084);
- DUMP_INTC_REG(INTC_MIR1, 0x00a4);
- DUMP_INTC_REG(INTC_MIR2, 0x00c4);
-#endif
-#if 0
- DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
- if (cpu_is_omap24xx()) {
- DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
- DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
- OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
- DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
- OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
- }
- DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
- DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
- DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
- DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
- DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
- DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
- DUMP_PRM_MOD_REG(CORE_MOD, OMAP2_PM_PWSTST);
-#endif
-#if 0
- /* DSP */
- if (cpu_is_omap24xx()) {
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
- DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_CM_CLKSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTST);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTCTRL);
- DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTST);
- }
-#endif
- } else {
- DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
- if (cpu_is_omap24xx())
- DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
- DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
- DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-#if 1
- DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
- DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
- DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
-#endif
- }
-
- switch (mode) {
- case 0:
- s1 = "full";
- s2 = "retention";
- break;
- case 1:
- s1 = "MPU";
- s2 = "retention";
- break;
- case 2:
- s1 = "MPU";
- s2 = "idle";
- break;
- }
-
- if (!resume)
-#ifdef CONFIG_NO_HZ
- printk(KERN_INFO
- "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
- jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
- jiffies));
-#else
- printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
-#endif
- else
- printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
- us / 1000, us % 1000);
-
- for (i = 0; i < reg_count; i++)
- printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
-}
-
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-static void pm_dbg_regset_store(u32 *ptr);
-
-static struct dentry *pm_dbg_dir;
-
static int pm_dbg_init_done;
static int pm_dbg_init(void);
DEBUG_FILE_TIMERS,
};
-struct pm_module_def {
- char name[8]; /* Name of the module */
- short type; /* CM or PRM */
- unsigned short offset;
- int low; /* First register address on this module */
- int high; /* Last register address on this module */
-};
-
-#define MOD_CM 0
-#define MOD_PRM 1
-
-static const struct pm_module_def *pm_dbg_reg_modules;
-static const struct pm_module_def omap3_pm_reg_modules[] = {
- { "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c },
- { "OCP", MOD_CM, OCP_MOD, 0, 0x10 },
- { "MPU", MOD_CM, MPU_MOD, 4, 0x4c },
- { "CORE", MOD_CM, CORE_MOD, 0, 0x4c },
- { "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c },
- { "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 },
- { "CCR", MOD_CM, PLL_MOD, 0, 0x70 },
- { "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c },
- { "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c },
- { "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c },
- { "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 },
- { "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 },
- { "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c },
-
- { "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc },
- { "OCP", MOD_PRM, OCP_MOD, 4, 0x1c },
- { "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 },
- { "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 },
- { "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 },
- { "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 },
- { "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 },
- { "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 },
- { "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 },
- { "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 },
- { "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 },
- { "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 },
- { "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 },
- { "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 },
- { "", 0, 0, 0, 0 },
-};
-
-#define PM_DBG_MAX_REG_SETS 4
-
-static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS];
-
-static int pm_dbg_get_regset_size(void)
-{
- static int regset_size;
-
- if (regset_size == 0) {
- int i = 0;
-
- while (pm_dbg_reg_modules[i].name[0] != 0) {
- regset_size += pm_dbg_reg_modules[i].high +
- 4 - pm_dbg_reg_modules[i].low;
- i++;
- }
- }
- return regset_size;
-}
-
-static int pm_dbg_show_regs(struct seq_file *s, void *unused)
-{
- int i, j;
- unsigned long val;
- int reg_set = (int)s->private;
- u32 *ptr;
- void *store = NULL;
- int regs;
- int linefeed;
-
- if (reg_set == 0) {
- store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
- ptr = store;
- pm_dbg_regset_store(ptr);
- } else {
- ptr = pm_dbg_reg_set[reg_set - 1];
- }
-
- i = 0;
-
- while (pm_dbg_reg_modules[i].name[0] != 0) {
- regs = 0;
- linefeed = 0;
- if (pm_dbg_reg_modules[i].type == MOD_CM)
- seq_printf(s, "MOD: CM_%s (%08x)\n",
- pm_dbg_reg_modules[i].name,
- (u32)(OMAP3430_CM_BASE +
- pm_dbg_reg_modules[i].offset));
- else
- seq_printf(s, "MOD: PRM_%s (%08x)\n",
- pm_dbg_reg_modules[i].name,
- (u32)(OMAP3430_PRM_BASE +
- pm_dbg_reg_modules[i].offset));
-
- for (j = pm_dbg_reg_modules[i].low;
- j <= pm_dbg_reg_modules[i].high; j += 4) {
- val = *(ptr++);
- if (val != 0) {
- regs++;
- if (linefeed) {
- seq_printf(s, "\n");
- linefeed = 0;
- }
- seq_printf(s, " %02x => %08lx", j, val);
- if (regs % 4 == 0)
- linefeed = 1;
- }
- }
- seq_printf(s, "\n");
- i++;
- }
-
- if (store != NULL)
- kfree(store);
-
- return 0;
-}
-
-static void pm_dbg_regset_store(u32 *ptr)
-{
- int i, j;
- u32 val;
-
- i = 0;
-
- while (pm_dbg_reg_modules[i].name[0] != 0) {
- for (j = pm_dbg_reg_modules[i].low;
- j <= pm_dbg_reg_modules[i].high; j += 4) {
- if (pm_dbg_reg_modules[i].type == MOD_CM)
- val = omap2_cm_read_mod_reg(
- pm_dbg_reg_modules[i].offset, j);
- else
- val = omap2_prm_read_mod_reg(
- pm_dbg_reg_modules[i].offset, j);
- *(ptr++) = val;
- }
- i++;
- }
-}
-
-int pm_dbg_regset_save(int reg_set)
-{
- if (pm_dbg_reg_set[reg_set-1] == NULL)
- return -EINVAL;
-
- pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]);
-
- return 0;
-}
-
static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = {
"OFF",
"RET",
};
}
-static int pm_dbg_reg_open(struct inode *inode, struct file *file)
-{
- return single_open(file, pm_dbg_show_regs, inode->i_private);
-}
-
static const struct file_operations debug_fops = {
.open = pm_dbg_open,
.read = seq_read,
.release = single_release,
};
-static const struct file_operations debug_reg_fops = {
- .open = pm_dbg_reg_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-int pm_dbg_regset_init(int reg_set)
-{
- char name[2];
-
- if (!pm_dbg_init_done)
- pm_dbg_init();
-
- if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS ||
- pm_dbg_reg_set[reg_set-1] != NULL)
- return -EINVAL;
-
- pm_dbg_reg_set[reg_set-1] =
- kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
-
- if (pm_dbg_reg_set[reg_set-1] == NULL)
- return -ENOMEM;
-
- if (pm_dbg_dir != NULL) {
- sprintf(name, "%d", reg_set);
-
- (void) debugfs_create_file(name, S_IRUGO,
- pm_dbg_dir, (void *)reg_set, &debug_reg_fops);
- }
-
- return 0;
-}
-
static int pwrdm_suspend_get(void *data, u64 *val)
{
int ret = -EINVAL;
{
u32 *option = data;
- if (option == &wakeup_timer_milliseconds && val >= 1000)
- return -EINVAL;
-
*option = val;
if (option == &enable_off_mode) {
DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
-static int pm_dbg_init(void)
+static int __init pm_dbg_init(void)
{
- int i;
struct dentry *d;
- char name[2];
if (pm_dbg_init_done)
return 0;
- if (cpu_is_omap34xx())
- pm_dbg_reg_modules = omap3_pm_reg_modules;
- else {
- printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
- return -ENODEV;
- }
-
d = debugfs_create_dir("pm_debug", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
pwrdm_for_each(pwrdms_setup, (void *)d);
- pm_dbg_dir = debugfs_create_dir("registers", d);
- if (IS_ERR(pm_dbg_dir))
- return PTR_ERR(pm_dbg_dir);
-
- (void) debugfs_create_file("current", S_IRUGO,
- pm_dbg_dir, (void *)0, &debug_reg_fops);
-
- for (i = 0; i < PM_DBG_MAX_REG_SETS; i++)
- if (pm_dbg_reg_set[i] != NULL) {
- sprintf(name, "%d", i+1);
- (void) debugfs_create_file(name, S_IRUGO,
- pm_dbg_dir, (void *)(i+1), &debug_reg_fops);
-
- }
-
(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d,
&enable_off_mode, &pm_dbg_option_fops);
- (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
- &sleep_while_idle, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
- &wakeup_timer_seconds, &pm_dbg_option_fops);
- (void) debugfs_create_file("wakeup_timer_milliseconds",
- S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
- &pm_dbg_option_fops);
pm_dbg_init_done = 1;
return 0;
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
-extern u32 wakeup_timer_seconds;
-extern u32 wakeup_timer_milliseconds;
-extern struct omap_dm_timer *gptimer_wakeup;
-
#ifdef CONFIG_PM_DEBUG
-extern void omap2_pm_dump(int mode, int resume, unsigned int us);
-extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
-extern int omap2_pm_debug;
extern u32 enable_off_mode;
-extern u32 sleep_while_idle;
#else
-#define omap2_pm_dump(mode, resume, us) do {} while (0);
-#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0);
-#define omap2_pm_debug 0
#define enable_off_mode 0
-#define sleep_while_idle 0
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
-extern int pm_dbg_regset_save(int reg_set);
-extern int pm_dbg_regset_init(int reg_set);
#else
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
-#define pm_dbg_regset_save(reg_set) do {} while (0);
-#define pm_dbg_regset_init(reg_set) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
extern void omap24xx_idle_loop_suspend(void);
#include "powerdomain.h"
#include "clockdomain.h"
+static int omap2_pm_debug;
+
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
omap2_gpio_prepare_for_idle(0);
if (omap2_pm_debug) {
- omap2_pm_dump(0, 0, 0);
getnstimeofday(&ts_preidle);
}
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- omap2_pm_dump(0, 1, tmp);
}
omap2_gpio_resume_after_idle();
}
if (omap2_pm_debug) {
- omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
getnstimeofday(&ts_preidle);
}
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
}
}
int omap3_can_sleep(void)
{
- if (!sleep_while_idle)
- return 0;
if (!omap_uart_can_sleep())
return 0;
return 1;
struct power_state *pwrst;
int state, ret = 0;
- if (wakeup_timer_seconds || wakeup_timer_milliseconds)
- omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
- wakeup_timer_milliseconds);
-
/* Read current next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node)
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
sr_write_reg(sr_info, IRQSTATUS, status);
}
- if (sr_class->class_type == SR_CLASS2 && sr_class->notify)
+ if (sr_class->notify)
sr_class->notify(sr_info->voltdm, status);
return IRQ_HANDLED;
struct resource *mem;
int ret = 0;
- if (sr_class->class_type == SR_CLASS2 &&
- sr_class->notify_flags && sr_info->irq) {
-
+ if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
if (name == NULL) {
ret = -ENOMEM;
0, name, (void *)sr_info);
if (ret)
goto error;
+ disable_irq(sr_info->irq);
}
if (pdata && pdata->enable_on_init)
return ret;
error:
- iounmap(sr_info->base);
- mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, resource_size(mem));
- list_del(&sr_info->node);
- dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
- "interrupt handler. Smartreflex will"
- "not function as desired\n", __func__);
- kfree(name);
- kfree(sr_info);
- return ret;
+ iounmap(sr_info->base);
+ mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, resource_size(mem));
+ list_del(&sr_info->node);
+ dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
+ "interrupt handler. Smartreflex will"
+ "not function as desired\n", __func__);
+ kfree(name);
+ kfree(sr_info);
+ return ret;
}
static void sr_v1_disable(struct omap_sr *sr)
return -EINVAL;
}
- if (!val)
- sr_stop_vddautocomp(sr_info);
- else
- sr_start_vddautocomp(sr_info);
+ /* control enable/disable only if there is a delta in value */
+ if (sr_info->autocomp_active != val) {
+ if (!val)
+ sr_stop_vddautocomp(sr_info);
+ else
+ sr_start_vddautocomp(sr_info);
+ }
return 0;
}
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/timer-gp.c
- *
- * OMAP2 GP timer support.
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Update to use new clocksource/clockevent layers
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * Original driver:
- * Copyright (C) 2005 Nokia Corporation
- * Author: Paul Mundt <paul.mundt@nokia.com>
- * Juha Yrjölä <juha.yrjola@nokia.com>
- * OMAP Dual-mode timer framework support by Timo Teras
- *
- * Some parts based off of TI's 24xx code:
- *
- * Copyright (C) 2004-2009 Texas Instruments, Inc.
- *
- * Roughly modelled after the OMAP1 MPU timer code.
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach/time.h>
-#include <plat/dmtimer.h>
-#include <asm/localtimer.h>
-#include <asm/sched_clock.h>
-#include <plat/common.h>
-#include <plat/omap_hwmod.h>
-
-#include "timer-gp.h"
-
-
-/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
-#define MAX_GPTIMER_ID 12
-
-static struct omap_dm_timer *gptimer;
-static struct clock_event_device clockevent_gpt;
-static u8 __initdata gptimer_id = 1;
-static u8 __initdata inited;
-struct omap_dm_timer *gptimer_wakeup;
-
-static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
-{
- struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id;
- struct clock_event_device *evt = &clockevent_gpt;
-
- omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW);
-
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap2_gp_timer_irq = {
- .name = "gp timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = omap2_gp_timer_interrupt,
-};
-
-static int omap2_gp_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles);
-
- return 0;
-}
-
-static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- u32 period;
-
- omap_dm_timer_stop(gptimer);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
- period -= 1;
- omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static struct clock_event_device clockevent_gpt = {
- .name = "gp timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_next_event = omap2_gp_timer_set_next_event,
- .set_mode = omap2_gp_timer_set_mode,
-};
-
-/**
- * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
- * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
- *
- * Define the GPTIMER that the system should use for the tick timer.
- * Meant to be called from board-*.c files in the event that GPTIMER1, the
- * default, is unsuitable. Returns -EINVAL on error or 0 on success.
- */
-int __init omap2_gp_clockevent_set_gptimer(u8 id)
-{
- if (id < 1 || id > MAX_GPTIMER_ID)
- return -EINVAL;
-
- BUG_ON(inited);
-
- gptimer_id = id;
-
- return 0;
-}
-
-static void __init omap2_gp_clockevent_init(void)
-{
- u32 tick_rate;
- int src;
- char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */
-
- inited = 1;
-
- sprintf(clockevent_hwmod_name, "timer%d", gptimer_id);
- omap_hwmod_setup_one(clockevent_hwmod_name);
-
- gptimer = omap_dm_timer_request_specific(gptimer_id);
- BUG_ON(gptimer == NULL);
- gptimer_wakeup = gptimer;
-
-#if defined(CONFIG_OMAP_32K_TIMER)
- src = OMAP_TIMER_SRC_32_KHZ;
-#else
- src = OMAP_TIMER_SRC_SYS_CLK;
- WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
- "secure 32KiHz clock source\n");
-#endif
-
- if (gptimer_id != 12)
- WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
- "timer-gp: omap_dm_timer_set_source() failed\n");
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
-
- pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
- gptimer_id, tick_rate);
-
- omap2_gp_timer_irq.dev_id = (void *)gptimer;
- setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
- omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-
- clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC,
- clockevent_gpt.shift);
- clockevent_gpt.max_delta_ns =
- clockevent_delta2ns(0xffffffff, &clockevent_gpt);
- clockevent_gpt.min_delta_ns =
- clockevent_delta2ns(3, &clockevent_gpt);
- /* Timer internal resynch latency. */
-
- clockevent_gpt.cpumask = cpumask_of(0);
- clockevents_register_device(&clockevent_gpt);
-}
-
-/* Clocksource code */
-
-#ifdef CONFIG_OMAP_32K_TIMER
-/*
- * When 32k-timer is enabled, don't use GPTimer for clocksource
- * instead, just leave default clocksource which uses the 32k
- * sync counter. See clocksource setup in plat-omap/counter_32k.c
- */
-
-static void __init omap2_gp_clocksource_init(void)
-{
- omap_init_clocksource_32k();
-}
-
-#else
-/*
- * clocksource
- */
-static DEFINE_CLOCK_DATA(cd);
-static struct omap_dm_timer *gpt_clocksource;
-static cycle_t clocksource_read_cycles(struct clocksource *cs)
-{
- return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
-}
-
-static struct clocksource clocksource_gpt = {
- .name = "gp timer",
- .rating = 300,
- .read = clocksource_read_cycles,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void notrace dmtimer_update_sched_clock(void)
-{
- u32 cyc;
-
- cyc = omap_dm_timer_read_counter(gpt_clocksource);
-
- update_sched_clock(&cd, cyc, (u32)~0);
-}
-
-/* Setup free-running counter for clocksource */
-static void __init omap2_gp_clocksource_init(void)
-{
- static struct omap_dm_timer *gpt;
- u32 tick_rate;
- static char err1[] __initdata = KERN_ERR
- "%s: failed to request dm-timer\n";
- static char err2[] __initdata = KERN_ERR
- "%s: can't register clocksource!\n";
-
- gpt = omap_dm_timer_request();
- if (!gpt)
- printk(err1, clocksource_gpt.name);
- gpt_clocksource = gpt;
-
- omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
-
- omap_dm_timer_set_load_start(gpt, 1, 0);
-
- init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate);
-
- if (clocksource_register_hz(&clocksource_gpt, tick_rate))
- printk(err2, clocksource_gpt.name);
-}
-#endif
-
-static void __init omap2_gp_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
- if (cpu_is_omap44xx()) {
- twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
- BUG_ON(!twd_base);
- }
-#endif
- omap_dm_timer_init();
-
- omap2_gp_clockevent_init();
- omap2_gp_clocksource_init();
-}
-
-struct sys_timer omap_timer = {
- .init = omap2_gp_timer_init,
-};
+++ /dev/null
-/*
- * OMAP2/3 GPTIMER support.headers
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
-
-extern int __init omap2_gp_clockevent_set_gptimer(u8 id);
-
-#endif
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/timer.c
+ *
+ * OMAP2 GP timer support.
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ * Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <asm/mach/time.h>
+#include <plat/dmtimer.h>
+#include <asm/localtimer.h>
+#include <asm/sched_clock.h>
+#include <plat/common.h>
+#include <plat/omap_hwmod.h>
+
+/* Parent clocks, eventually these will come from the clock framework */
+
+#define OMAP2_MPU_SOURCE "sys_ck"
+#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE
+#define OMAP4_MPU_SOURCE "sys_clkin_ck"
+#define OMAP2_32K_SOURCE "func_32k_ck"
+#define OMAP3_32K_SOURCE "omap_32k_fck"
+#define OMAP4_32K_SOURCE "sys_32k_ck"
+
+#ifdef CONFIG_OMAP_32K_TIMER
+#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE
+#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE
+#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE
+#define OMAP3_SECURE_TIMER 12
+#else
+#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE
+#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE
+#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE
+#define OMAP3_SECURE_TIMER 1
+#endif
+
+/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
+#define MAX_GPTIMER_ID 12
+
+u32 sys_timer_reserved;
+
+/* Clockevent code */
+
+static struct omap_dm_timer clkev;
+static struct clock_event_device clockevent_gpt;
+
+static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_gpt;
+
+ __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction omap2_gp_timer_irq = {
+ .name = "gp timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = omap2_gp_timer_interrupt,
+};
+
+static int omap2_gp_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST,
+ 0xffffffff - cycles, 1);
+
+ return 0;
+}
+
+static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ u32 period;
+
+ __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ period = clkev.rate / HZ;
+ period -= 1;
+ /* Looks like we need to first set the load value separately */
+ __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG,
+ 0xffffffff - period, 1);
+ __omap_dm_timer_load_start(clkev.io_base,
+ OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
+ 0xffffffff - period, 1);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_gpt = {
+ .name = "gp timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .set_next_event = omap2_gp_timer_set_next_event,
+ .set_mode = omap2_gp_timer_set_mode,
+};
+
+static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
+ int gptimer_id,
+ const char *fck_source)
+{
+ char name[10]; /* 10 = sizeof("gptXX_Xck0") */
+ struct omap_hwmod *oh;
+ size_t size;
+ int res = 0;
+
+ sprintf(name, "timer%d", gptimer_id);
+ omap_hwmod_setup_one(name);
+ oh = omap_hwmod_lookup(name);
+ if (!oh)
+ return -ENODEV;
+
+ timer->irq = oh->mpu_irqs[0].irq;
+ timer->phys_base = oh->slaves[0]->addr->pa_start;
+ size = oh->slaves[0]->addr->pa_end - timer->phys_base;
+
+ /* Static mapping, never released */
+ timer->io_base = ioremap(timer->phys_base, size);
+ if (!timer->io_base)
+ return -ENXIO;
+
+ /* After the dmtimer is using hwmod these clocks won't be needed */
+ sprintf(name, "gpt%d_fck", gptimer_id);
+ timer->fclk = clk_get(NULL, name);
+ if (IS_ERR(timer->fclk))
+ return -ENODEV;
+
+ sprintf(name, "gpt%d_ick", gptimer_id);
+ timer->iclk = clk_get(NULL, name);
+ if (IS_ERR(timer->iclk)) {
+ clk_put(timer->fclk);
+ return -ENODEV;
+ }
+
+ omap_hwmod_enable(oh);
+
+ sys_timer_reserved |= (1 << (gptimer_id - 1));
+
+ if (gptimer_id != 12) {
+ struct clk *src;
+
+ src = clk_get(NULL, fck_source);
+ if (IS_ERR(src)) {
+ res = -EINVAL;
+ } else {
+ res = __omap_dm_timer_set_source(timer->fclk, src);
+ if (IS_ERR_VALUE(res))
+ pr_warning("%s: timer%i cannot set source\n",
+ __func__, gptimer_id);
+ clk_put(src);
+ }
+ }
+ __omap_dm_timer_reset(timer->io_base, 1, 1);
+ timer->posted = 1;
+
+ timer->rate = clk_get_rate(timer->fclk);
+
+ timer->reserved = 1;
+
+ return res;
+}
+
+static void __init omap2_gp_clockevent_init(int gptimer_id,
+ const char *fck_source)
+{
+ int res;
+
+ res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source);
+ BUG_ON(res);
+
+ omap2_gp_timer_irq.dev_id = (void *)&clkev;
+ setup_irq(clkev.irq, &omap2_gp_timer_irq);
+
+ __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+
+ clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
+ clockevent_gpt.shift);
+ clockevent_gpt.max_delta_ns =
+ clockevent_delta2ns(0xffffffff, &clockevent_gpt);
+ clockevent_gpt.min_delta_ns =
+ clockevent_delta2ns(3, &clockevent_gpt);
+ /* Timer internal resynch latency. */
+
+ clockevent_gpt.cpumask = cpumask_of(0);
+ clockevents_register_device(&clockevent_gpt);
+
+ pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
+ gptimer_id, clkev.rate);
+}
+
+/* Clocksource code */
+
+#ifdef CONFIG_OMAP_32K_TIMER
+/*
+ * When 32k-timer is enabled, don't use GPTimer for clocksource
+ * instead, just leave default clocksource which uses the 32k
+ * sync counter. See clocksource setup in plat-omap/counter_32k.c
+ */
+
+static void __init omap2_gp_clocksource_init(int unused, const char *dummy)
+{
+ omap_init_clocksource_32k();
+}
+
+#else
+
+static struct omap_dm_timer clksrc;
+
+/*
+ * clocksource
+ */
+static DEFINE_CLOCK_DATA(cd);
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
+{
+ return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1);
+}
+
+static struct clocksource clocksource_gpt = {
+ .name = "gp timer",
+ .rating = 300,
+ .read = clocksource_read_cycles,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void notrace dmtimer_update_sched_clock(void)
+{
+ u32 cyc;
+
+ cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+unsigned long long notrace sched_clock(void)
+{
+ u32 cyc = 0;
+
+ if (clksrc.reserved)
+ cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+/* Setup free-running counter for clocksource */
+static void __init omap2_gp_clocksource_init(int gptimer_id,
+ const char *fck_source)
+{
+ int res;
+
+ res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source);
+ BUG_ON(res);
+
+ pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
+ gptimer_id, clksrc.rate);
+
+ __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1);
+ init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
+
+ if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
+ pr_err("Could not register clocksource %s\n",
+ clocksource_gpt.name);
+}
+#endif
+
+#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \
+ clksrc_nr, clksrc_src) \
+static void __init omap##name##_timer_init(void) \
+{ \
+ omap2_gp_clockevent_init((clkev_nr), clkev_src); \
+ omap2_gp_clocksource_init((clksrc_nr), clksrc_src); \
+}
+
+#define OMAP_SYS_TIMER(name) \
+struct sys_timer omap##name##_timer = { \
+ .init = omap##name##_timer_init, \
+};
+
+#ifdef CONFIG_ARCH_OMAP2
+OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE)
+OMAP_SYS_TIMER(2)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE)
+OMAP_SYS_TIMER(3)
+OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE,
+ 2, OMAP3_MPU_SOURCE)
+OMAP_SYS_TIMER(3_secure)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static void __init omap4_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
+ BUG_ON(!twd_base);
+#endif
+ omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
+ omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE);
+}
+OMAP_SYS_TIMER(4)
+#endif
--- /dev/null
+/*
+ * twl-common.c
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc..
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c/twl.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+
+#include <plat/i2c.h>
+#include <plat/usb.h>
+
+#include "twl-common.h"
+
+static struct i2c_board_info __initdata pmic_i2c_board_info = {
+ .addr = 0x48,
+ .flags = I2C_CLIENT_WAKE,
+};
+
+void __init omap_pmic_init(int bus, u32 clkrate,
+ const char *pmic_type, int pmic_irq,
+ struct twl4030_platform_data *pmic_data)
+{
+ strncpy(pmic_i2c_board_info.type, pmic_type,
+ sizeof(pmic_i2c_board_info.type));
+ pmic_i2c_board_info.irq = pmic_irq;
+ pmic_i2c_board_info.platform_data = pmic_data;
+
+ omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
+}
+
+static struct twl4030_usb_data omap4_usb_pdata = {
+ .phy_init = omap4430_phy_init,
+ .phy_exit = omap4430_phy_exit,
+ .phy_power = omap4430_phy_power,
+ .phy_set_clock = omap4430_phy_set_clk,
+ .phy_suspend = omap4430_phy_suspend,
+};
+
+static struct twl4030_usb_data omap3_usb_pdata = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int omap3_batt_table[] = {
+/* 0 C */
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
+8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
+5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
+4040, 3910, 3790, 3670, 3550
+};
+
+static struct twl4030_bci_platform_data omap3_bci_pdata = {
+ .battery_tmp_tbl = omap3_batt_table,
+ .tblsize = ARRAY_SIZE(omap3_batt_table),
+};
+
+static struct twl4030_madc_platform_data omap3_madc_pdata = {
+ .irq_line = 1,
+};
+
+static struct twl4030_codec_audio_data omap3_audio;
+
+static struct twl4030_codec_data omap3_codec_pdata = {
+ .audio_mclk = 26000000,
+ .audio = &omap3_audio,
+};
+
+static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {
+ REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
+};
+
+static struct regulator_init_data omap3_vdac_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies),
+ .consumer_supplies = omap3_vdda_dac_supplies,
+};
+
+static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
+};
+
+static struct regulator_init_data omap3_vpll2_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies),
+ .consumer_supplies = omap3_vpll2_supplies,
+};
+
+static struct regulator_init_data omap4_vdac_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data omap4_vaux2_idata = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data omap4_vaux3_idata = {
+ .constraints = {
+ .min_uV = 1000000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_consumer_supply omap4_vmmc_supply[] = {
+ REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data omap4_vmmc_idata = {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap4_vmmc_supply),
+ .consumer_supplies = omap4_vmmc_supply,
+};
+
+static struct regulator_init_data omap4_vpp_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 2500000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data omap4_vana_idata = {
+ .constraints = {
+ .min_uV = 2100000,
+ .max_uV = 2100000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data omap4_vcxio_idata = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data omap4_vusb_idata = {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static struct regulator_init_data omap4_clk32kg_idata = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
+ u32 pdata_flags, u32 regulators_flags)
+{
+ if (!pmic_data->irq_base)
+ pmic_data->irq_base = TWL6030_IRQ_BASE;
+ if (!pmic_data->irq_end)
+ pmic_data->irq_end = TWL6030_IRQ_END;
+
+ /* Common platform data configurations */
+ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+ pmic_data->usb = &omap4_usb_pdata;
+
+ /* Common regulator configurations */
+ if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+ pmic_data->vdac = &omap4_vdac_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2)
+ pmic_data->vaux2 = &omap4_vaux2_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3)
+ pmic_data->vaux3 = &omap4_vaux3_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc)
+ pmic_data->vmmc = &omap4_vmmc_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp)
+ pmic_data->vpp = &omap4_vpp_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana)
+ pmic_data->vana = &omap4_vana_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio)
+ pmic_data->vcxio = &omap4_vcxio_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb)
+ pmic_data->vusb = &omap4_vusb_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG &&
+ !pmic_data->clk32kg)
+ pmic_data->clk32kg = &omap4_clk32kg_idata;
+}
+
+void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+ u32 pdata_flags, u32 regulators_flags)
+{
+ if (!pmic_data->irq_base)
+ pmic_data->irq_base = TWL4030_IRQ_BASE;
+ if (!pmic_data->irq_end)
+ pmic_data->irq_end = TWL4030_IRQ_END;
+
+ /* Common platform data configurations */
+ if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
+ pmic_data->usb = &omap3_usb_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
+ pmic_data->bci = &omap3_bci_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
+ pmic_data->madc = &omap3_madc_pdata;
+
+ if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec)
+ pmic_data->codec = &omap3_codec_pdata;
+
+ /* Common regulator configurations */
+ if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
+ pmic_data->vdac = &omap3_vdac_idata;
+
+ if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
+ pmic_data->vpll2 = &omap3_vpll2_idata;
+}
--- /dev/null
+#ifndef __OMAP_PMIC_COMMON__
+#define __OMAP_PMIC_COMMON__
+
+#define TWL_COMMON_PDATA_USB (1 << 0)
+#define TWL_COMMON_PDATA_BCI (1 << 1)
+#define TWL_COMMON_PDATA_MADC (1 << 2)
+#define TWL_COMMON_PDATA_AUDIO (1 << 3)
+
+/* Common LDO regulators for TWL4030/TWL6030 */
+#define TWL_COMMON_REGULATOR_VDAC (1 << 0)
+#define TWL_COMMON_REGULATOR_VAUX1 (1 << 1)
+#define TWL_COMMON_REGULATOR_VAUX2 (1 << 2)
+#define TWL_COMMON_REGULATOR_VAUX3 (1 << 3)
+
+/* TWL6030 LDO regulators */
+#define TWL_COMMON_REGULATOR_VMMC (1 << 4)
+#define TWL_COMMON_REGULATOR_VPP (1 << 5)
+#define TWL_COMMON_REGULATOR_VUSIM (1 << 6)
+#define TWL_COMMON_REGULATOR_VANA (1 << 7)
+#define TWL_COMMON_REGULATOR_VCXIO (1 << 8)
+#define TWL_COMMON_REGULATOR_VUSB (1 << 9)
+#define TWL_COMMON_REGULATOR_CLK32KG (1 << 10)
+
+/* TWL4030 LDO regulators */
+#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4)
+#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5)
+
+
+struct twl4030_platform_data;
+
+void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
+ struct twl4030_platform_data *pmic_data);
+
+static inline void omap2_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data)
+{
+ omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
+}
+
+static inline void omap3_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data)
+{
+ omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
+}
+
+static inline void omap4_pmic_init(const char *pmic_type,
+ struct twl4030_platform_data *pmic_data)
+{
+ /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
+ omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
+}
+
+void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
+ u32 pdata_flags, u32 regulators_flags);
+
+void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
+ u32 pdata_flags, u32 regulators_flags);
+
+#endif /* __OMAP_PMIC_COMMON__ */
return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
}
-#ifndef CONFIG_OMAP_MPU_TIMER
+#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER)
unsigned long long notrace sched_clock(void)
{
return _omap_32k_sched_clock();
#include <plat/dmtimer.h>
#include <mach/irqs.h>
-/* register offsets */
-#define _OMAP_TIMER_ID_OFFSET 0x00
-#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10
-#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14
-#define _OMAP_TIMER_STAT_OFFSET 0x18
-#define _OMAP_TIMER_INT_EN_OFFSET 0x1c
-#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
-#define _OMAP_TIMER_CTRL_OFFSET 0x24
-#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
-#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
-#define OMAP_TIMER_CTRL_PT (1 << 12)
-#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
-#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
-#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
-#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
-#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
-#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
-#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */
-#define OMAP_TIMER_CTRL_POSTED (1 << 2)
-#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
-#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
-#define _OMAP_TIMER_COUNTER_OFFSET 0x28
-#define _OMAP_TIMER_LOAD_OFFSET 0x2c
-#define _OMAP_TIMER_TRIGGER_OFFSET 0x30
-#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34
-#define WP_NONE 0 /* no write pending bit */
-#define WP_TCLR (1 << 0)
-#define WP_TCRR (1 << 1)
-#define WP_TLDR (1 << 2)
-#define WP_TTGR (1 << 3)
-#define WP_TMAR (1 << 4)
-#define WP_TPIR (1 << 5)
-#define WP_TNIR (1 << 6)
-#define WP_TCVR (1 << 7)
-#define WP_TOCR (1 << 8)
-#define WP_TOWR (1 << 9)
-#define _OMAP_TIMER_MATCH_OFFSET 0x38
-#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c
-#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40
-#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */
-#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */
-#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */
-#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */
-#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */
-
-/* register offsets with the write pending bit encoded */
-#define WPSHIFT 16
-
-#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \
- | (WP_TCLR << WPSHIFT))
-
-#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \
- | (WP_TCRR << WPSHIFT))
-
-#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \
- | (WP_TLDR << WPSHIFT))
-
-#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \
- | (WP_TTGR << WPSHIFT))
-
-#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \
- | (WP_TMAR << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \
- | (WP_TPIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \
- | (WP_TNIR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \
- | (WP_TCVR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_SET_REG \
- (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
-
-#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
- (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
-
-struct omap_dm_timer {
- unsigned long phys_base;
- int irq;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- struct clk *iclk, *fclk;
-#endif
- void __iomem *io_base;
- unsigned reserved:1;
- unsigned enabled:1;
- unsigned posted:1;
-};
-
static int dm_timer_count;
#ifdef CONFIG_ARCH_OMAP1
*/
static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
{
- if (timer->posted)
- while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
- cpu_relax();
- return readl(timer->io_base + (reg & 0xff));
+ return __omap_dm_timer_read(timer->io_base, reg, timer->posted);
}
/*
static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
u32 value)
{
- if (timer->posted)
- while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
- cpu_relax();
- writel(value, timer->io_base + (reg & 0xff));
+ __omap_dm_timer_write(timer->io_base, reg, value, timer->posted);
}
static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
static void omap_dm_timer_reset(struct omap_dm_timer *timer)
{
- u32 l;
+ int autoidle = 0, wakeup = 0;
if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
}
omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
- l |= 0x02 << 3; /* Set to smart-idle mode */
- l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
-
- /* Enable autoidle on OMAP2 / OMAP3 */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- l |= 0x1 << 0;
+ /* Enable autoidle on OMAP2+ */
+ if (cpu_class_is_omap2())
+ autoidle = 1;
/*
* Enable wake-up on OMAP2 CPUs.
*/
if (cpu_class_is_omap2())
- l |= 1 << 2;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+ wakeup = 1;
- /* Match hardware reset default of posted mode */
- omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
- OMAP_TIMER_CTRL_POSTED);
+ __omap_dm_timer_reset(timer->io_base, autoidle, wakeup);
timer->posted = 1;
}
-static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+void omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
omap_dm_timer_enable(timer);
omap_dm_timer_reset(timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer)
{
- u32 l;
+ unsigned long rate = 0;
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- if (l & OMAP_TIMER_CTRL_ST) {
- l &= ~0x1;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
#ifdef CONFIG_ARCH_OMAP2PLUS
- /* Readback to make sure write has completed */
- omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
- /*
- * Wait for functional clock period x 3.5 to make sure that
- * timer is stopped
- */
- udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+ rate = clk_get_rate(timer->fclk);
#endif
- }
- /* Ack possibly pending interrupt */
- omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
- OMAP_TIMER_INT_OVERFLOW);
+
+ __omap_dm_timer_stop(timer->io_base, timer->posted, rate);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
- int ret = -EINVAL;
-
if (source < 0 || source >= 3)
return -EINVAL;
- clk_disable(timer->fclk);
- ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
- clk_enable(timer->fclk);
-
- /*
- * When the functional clock disappears, too quick writes seem
- * to cause an abort. XXX Is this still necessary?
- */
- __delay(300000);
-
- return ret;
+ return __omap_dm_timer_set_source(timer->fclk,
+ dm_source_clocks[source]);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
}
l |= OMAP_TIMER_CTRL_ST;
- omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load);
- omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+ __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
- omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value);
+ __omap_dm_timer_int_enable(timer->io_base, value);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
+ __omap_dm_timer_write_status(timer->io_base, value);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
- unsigned int l;
-
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
-
- return l;
+ return __omap_dm_timer_read_counter(timer->io_base, timer->posted);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
}
EXPORT_SYMBOL_GPL(omap_dm_timers_active);
-int __init omap_dm_timer_init(void)
+static int __init omap_dm_timer_init(void)
{
struct omap_dm_timer *timer;
int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
sprintf(clk_name, "gpt%d_fck", i + 1);
timer->fclk = clk_get(NULL, clk_name);
}
+
+ /* One or two timers may be set up early for sys_timer */
+ if (sys_timer_reserved & (1 << i)) {
+ timer->reserved = 1;
+ timer->posted = 1;
+ }
#endif
}
return 0;
}
+
+arch_initcall(omap_dm_timer_init);
struct sys_timer;
extern void omap_map_common_io(void);
-extern struct sys_timer omap_timer;
+extern struct sys_timer omap1_timer;
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
extern bool omap_32k_timer_init(void);
extern int __init omap_init_clocksource_32k(void);
extern unsigned long long notrace omap_32k_sched_clock(void);
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/clk.h>
+#include <linux/delay.h>
+
#ifndef __ASM_ARCH_DMTIMER_H
#define __ASM_ARCH_DMTIMER_H
*/
#define OMAP_TIMER_IP_VERSION_1 0x1
struct omap_dm_timer;
-extern struct omap_dm_timer *gptimer_wakeup;
-extern struct sys_timer omap_timer;
struct clk;
-int omap_dm_timer_init(void);
-
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
void omap_dm_timer_free(struct omap_dm_timer *timer);
int omap_dm_timers_active(void);
+/*
+ * Do not use the defines below, they are not needed. They should be only
+ * used by dmtimer.c and sys_timer related code.
+ */
+
+/* register offsets */
+#define _OMAP_TIMER_ID_OFFSET 0x00
+#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10
+#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14
+#define _OMAP_TIMER_STAT_OFFSET 0x18
+#define _OMAP_TIMER_INT_EN_OFFSET 0x1c
+#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
+#define _OMAP_TIMER_CTRL_OFFSET 0x24
+#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
+#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
+#define OMAP_TIMER_CTRL_PT (1 << 12)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
+#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
+#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */
+#define OMAP_TIMER_CTRL_POSTED (1 << 2)
+#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
+#define _OMAP_TIMER_COUNTER_OFFSET 0x28
+#define _OMAP_TIMER_LOAD_OFFSET 0x2c
+#define _OMAP_TIMER_TRIGGER_OFFSET 0x30
+#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34
+#define WP_NONE 0 /* no write pending bit */
+#define WP_TCLR (1 << 0)
+#define WP_TCRR (1 << 1)
+#define WP_TLDR (1 << 2)
+#define WP_TTGR (1 << 3)
+#define WP_TMAR (1 << 4)
+#define WP_TPIR (1 << 5)
+#define WP_TNIR (1 << 6)
+#define WP_TCVR (1 << 7)
+#define WP_TOCR (1 << 8)
+#define WP_TOWR (1 << 9)
+#define _OMAP_TIMER_MATCH_OFFSET 0x38
+#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c
+#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40
+#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */
+#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */
+#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */
+#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */
+#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */
+
+/* register offsets with the write pending bit encoded */
+#define WPSHIFT 16
+
+#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \
+ | (WP_TCLR << WPSHIFT))
+
+#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \
+ | (WP_TCRR << WPSHIFT))
+
+#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \
+ | (WP_TLDR << WPSHIFT))
+
+#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \
+ | (WP_TTGR << WPSHIFT))
+
+#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \
+ | (WP_TMAR << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \
+ | (WP_NONE << WPSHIFT))
+
+#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \
+ | (WP_TPIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \
+ | (WP_TNIR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \
+ | (WP_TCVR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_SET_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT))
+
+#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \
+ (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT))
+
+struct omap_dm_timer {
+ unsigned long phys_base;
+ int irq;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ struct clk *iclk, *fclk;
+#endif
+ void __iomem *io_base;
+ unsigned long rate;
+ unsigned reserved:1;
+ unsigned enabled:1;
+ unsigned posted:1;
+};
+
+extern u32 sys_timer_reserved;
+void omap_dm_timer_prepare(struct omap_dm_timer *timer);
+
+static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
+ int posted)
+{
+ if (posted)
+ while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+ & (reg >> WPSHIFT))
+ cpu_relax();
+
+ return __raw_readl(base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
+ int posted)
+{
+ if (posted)
+ while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
+ & (reg >> WPSHIFT))
+ cpu_relax();
+
+ __raw_writel(val, base + (reg & 0xff));
+}
+
+/* Assumes the source clock has been set by caller */
+static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle,
+ int wakeup)
+{
+ u32 l;
+
+ l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0);
+ l |= 0x02 << 3; /* Set to smart-idle mode */
+ l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
+
+ if (autoidle)
+ l |= 0x1 << 0;
+
+ if (wakeup)
+ l |= 1 << 2;
+
+ __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0);
+
+ /* Match hardware reset default of posted mode */
+ __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG,
+ OMAP_TIMER_CTRL_POSTED, 0);
+}
+
+static inline int __omap_dm_timer_set_source(struct clk *timer_fck,
+ struct clk *parent)
+{
+ int ret;
+
+ clk_disable(timer_fck);
+ ret = clk_set_parent(timer_fck, parent);
+ clk_enable(timer_fck);
+
+ /*
+ * When the functional clock disappears, too quick writes seem
+ * to cause an abort. XXX Is this still necessary?
+ */
+ __delay(300000);
+
+ return ret;
+}
+
+static inline void __omap_dm_timer_stop(void __iomem *base, int posted,
+ unsigned long rate)
+{
+ u32 l;
+
+ l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ if (l & OMAP_TIMER_CTRL_ST) {
+ l &= ~0x1;
+ __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ /* Readback to make sure write has completed */
+ __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ /*
+ * Wait for functional clock period x 3.5 to make sure that
+ * timer is stopped
+ */
+ udelay(3500000 / rate + 1);
+#endif
+ }
+
+ /* Ack possibly pending interrupt */
+ __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG,
+ OMAP_TIMER_INT_OVERFLOW, 0);
+}
+
+static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl,
+ unsigned int load, int posted)
+{
+ __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted);
+ __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted);
+}
+
+static inline void __omap_dm_timer_int_enable(void __iomem *base,
+ unsigned int value)
+{
+ __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0);
+ __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+}
+
+static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base,
+ int posted)
+{
+ return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted);
+}
+
+static inline void __omap_dm_timer_write_status(void __iomem *base,
+ unsigned int value)
+{
+ __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0);
+}
#endif /* __ASM_ARCH_DMTIMER_H */
#define INTCPS_NR_IRQS 96
#ifndef __ASSEMBLY__
-extern void omap_init_irq(void);
+extern void __iomem *omap_irq_base;
+void omap1_init_irq(void);
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
extern int omap_irq_pending(void);
void omap_intc_save_context(void);
void omap_intc_restore_context(void);
#ifndef __ASM_ARCH_OMAP_MCBSP_H
#define __ASM_ARCH_OMAP_MCBSP_H
-#include <linux/completion.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
static struct platform_device omap_mcbsp##port_nr = { \
.name = "omap-mcbsp-dai", \
- .id = OMAP_MCBSP##port_nr, \
+ .id = port_nr - 1, \
}
#define MCBSP_CONFIG_TYPE2 0x2
u16 rccr;
};
-typedef enum {
- OMAP_MCBSP1 = 0,
- OMAP_MCBSP2,
- OMAP_MCBSP3,
- OMAP_MCBSP4,
- OMAP_MCBSP5
-} omap_mcbsp_id;
-
-typedef int __bitwise omap_mcbsp_io_type_t;
-#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
-#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
-
typedef enum {
OMAP_MCBSP_WORD_8 = 0,
OMAP_MCBSP_WORD_12,
OMAP_MCBSP_WORD_32,
} omap_mcbsp_word_length;
-typedef enum {
- OMAP_MCBSP_CLK_RISING = 0,
- OMAP_MCBSP_CLK_FALLING,
-} omap_mcbsp_clk_polarity;
-
-typedef enum {
- OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
- OMAP_MCBSP_FS_ACTIVE_LOW,
-} omap_mcbsp_fs_polarity;
-
-typedef enum {
- OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
- OMAP_MCBSP_CLK_STP_MODE_DELAY,
-} omap_mcbsp_clk_stp_mode;
-
-
-/******* SPI specific mode **********/
-typedef enum {
- OMAP_MCBSP_SPI_MASTER = 0,
- OMAP_MCBSP_SPI_SLAVE,
-} omap_mcbsp_spi_mode;
-
-struct omap_mcbsp_spi_cfg {
- omap_mcbsp_spi_mode spi_mode;
- omap_mcbsp_clk_polarity rx_clock_polarity;
- omap_mcbsp_clk_polarity tx_clock_polarity;
- omap_mcbsp_fs_polarity fsx_polarity;
- u8 clk_div;
- omap_mcbsp_clk_stp_mode clk_stp_mode;
- omap_mcbsp_word_length word_length;
-};
-
/* Platform specific configuration */
struct omap_mcbsp_ops {
void (*request)(unsigned int);
void __iomem *io_base;
u8 id;
u8 free;
- omap_mcbsp_word_length rx_word_length;
- omap_mcbsp_word_length tx_word_length;
- omap_mcbsp_io_type_t io_type; /* IRQ or poll */
- /* IRQ based TX/RX */
int rx_irq;
int tx_irq;
/* DMA stuff */
u8 dma_rx_sync;
- short dma_rx_lch;
u8 dma_tx_sync;
- short dma_tx_lch;
-
- /* Completion queues */
- struct completion tx_irq_completion;
- struct completion rx_irq_completion;
- struct completion tx_dma_completion;
- struct completion rx_dma_completion;
/* Protect the field .free, while checking if the mcbsp is in use */
spinlock_t lock;
void omap_mcbsp_free(unsigned int id);
void omap_mcbsp_start(unsigned int id, int tx, int rx);
void omap_mcbsp_stop(unsigned int id, int tx, int rx);
-void omap_mcbsp_xmit_word(unsigned int id, u32 word);
-u32 omap_mcbsp_recv_word(unsigned int id);
-
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
-
/* McBSP functional clock source changing function */
extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
-/* SPI specific API */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
-
-/* Polled read/write functions */
-int omap_mcbsp_pollread(unsigned int id, u16 * buf);
-int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
-int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
/* McBSP signal muxing API */
void omap2_mcbsp1_mux_clkr_src(u8 mux);
};
struct omap_nand_platform_data {
- unsigned int options;
int cs;
- int gpio_irq;
struct mtd_partition *parts;
struct gpmc_timings *gpmc_t;
int nr_parts;
- int (*nand_setup)(void);
- int (*dev_ready)(struct omap_nand_platform_data *);
- int dma_channel;
+ bool dev_ready;
int gpmc_irq;
enum nand_io xfer_type;
unsigned long phys_base;
u8 cols;
};
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
+ struct omap_board_data *);
#endif
/* omap3 based boards using UART3 */
DEBUG_LL_OMAP3(3, cm_t35);
DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
DEBUG_LL_OMAP3(3, craneboard);
DEBUG_LL_OMAP3(3, devkit8000);
DEBUG_LL_OMAP3(3, igep0020);
for_each_sg(sgt->sgl, sg, sgt->nents, i) {
size_t bytes;
- bytes = sg_dma_len(sg);
+ bytes = sg->length;
if (!iopgsz_ok(bytes)) {
pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
int err;
pa = sg_phys(sg);
- bytes = sg_dma_len(sg);
+ bytes = sg->length;
BUG_ON(bytes != PAGE_SIZE);
struct iotlb_entry e;
pa = sg_phys(sg);
- bytes = sg_dma_len(sg);
+ bytes = sg->length;
flags &= ~IOVMF_PGSZ_MASK;
pgsz = bytes_to_iopgsz(bytes);
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <linux/wait.h>
-#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
-#include <plat/dma.h>
#include <plat/mcbsp.h>
#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
irqst_spcr2);
/* Writing zero to XSYNC_ERR clears the IRQ */
MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2));
- } else {
- complete(&mcbsp_tx->tx_irq_completion);
}
return IRQ_HANDLED;
irqst_spcr1);
/* Writing zero to RSYNC_ERR clears the IRQ */
MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
- } else {
- complete(&mcbsp_rx->rx_irq_completion);
}
return IRQ_HANDLED;
}
-static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
-{
- struct omap_mcbsp *mcbsp_dma_tx = data;
-
- dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n",
- MCBSP_READ(mcbsp_dma_tx, SPCR2));
-
- /* We can free the channels */
- omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
- mcbsp_dma_tx->dma_tx_lch = -1;
-
- complete(&mcbsp_dma_tx->tx_dma_completion);
-}
-
-static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
-{
- struct omap_mcbsp *mcbsp_dma_rx = data;
-
- dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n",
- MCBSP_READ(mcbsp_dma_rx, SPCR2));
-
- /* We can free the channels */
- omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
- mcbsp_dma_rx->dma_rx_lch = -1;
-
- complete(&mcbsp_dma_rx->rx_dma_completion);
-}
-
/*
* omap_mcbsp_config simply write a config to the
* appropriate McBSP.
static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
#endif
-/*
- * We can choose between IRQ based or polled IO.
- * This needs to be called before omap_mcbsp_request().
- */
-int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- spin_lock(&mcbsp->lock);
-
- if (!mcbsp->free) {
- dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
- mcbsp->id);
- spin_unlock(&mcbsp->lock);
- return -EINVAL;
- }
-
- mcbsp->io_type = io_type;
-
- spin_unlock(&mcbsp->lock);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_set_io_type);
-
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
MCBSP_WRITE(mcbsp, SPCR1, 0);
MCBSP_WRITE(mcbsp, SPCR2, 0);
- if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
- /* We need to get IRQs here */
- init_completion(&mcbsp->tx_irq_completion);
- err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
- 0, "McBSP", (void *)mcbsp);
+ err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
+ 0, "McBSP", (void *)mcbsp);
+ if (err != 0) {
+ dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
+ "for McBSP%d\n", mcbsp->tx_irq,
+ mcbsp->id);
+ goto err_clk_disable;
+ }
+
+ if (mcbsp->rx_irq) {
+ err = request_irq(mcbsp->rx_irq,
+ omap_mcbsp_rx_irq_handler,
+ 0, "McBSP", (void *)mcbsp);
if (err != 0) {
- dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
- "for McBSP%d\n", mcbsp->tx_irq,
+ dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
+ "for McBSP%d\n", mcbsp->rx_irq,
mcbsp->id);
- goto err_clk_disable;
- }
-
- if (mcbsp->rx_irq) {
- init_completion(&mcbsp->rx_irq_completion);
- err = request_irq(mcbsp->rx_irq,
- omap_mcbsp_rx_irq_handler,
- 0, "McBSP", (void *)mcbsp);
- if (err != 0) {
- dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
- "for McBSP%d\n", mcbsp->rx_irq,
- mcbsp->id);
- goto err_free_irq;
- }
+ goto err_free_irq;
}
}
pm_runtime_put_sync(mcbsp->dev);
- if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
- /* Free IRQs */
- if (mcbsp->rx_irq)
- free_irq(mcbsp->rx_irq, (void *)mcbsp);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
- }
+ if (mcbsp->rx_irq)
+ free_irq(mcbsp->rx_irq, (void *)mcbsp);
+ free_irq(mcbsp->tx_irq, (void *)mcbsp);
reg_cache = mcbsp->reg_cache;
if (cpu_is_omap34xx())
omap_st_start(mcbsp);
- mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
- mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
-
/* Only enable SRG, if McBSP is master */
w = MCBSP_READ_CACHE(mcbsp, PCR0);
if (w & (FSXM | FSRM | CLKXM | CLKRM))
}
EXPORT_SYMBOL(omap_mcbsp_stop);
-/* polled mcbsp i/o operations */
-int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
-
- MCBSP_WRITE(mcbsp, DXR1, buf);
- /* if frame sync error - clear the error */
- if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) {
- /* clear error */
- MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2));
- /* resend */
- return -1;
- } else {
- /* wait for transmit confirmation */
- int attemps = 0;
- while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) {
- if (attemps++ > 1000) {
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) &
- (~XRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) |
- (XRST));
- udelay(10);
- dev_err(mcbsp->dev, "Could not write to"
- " McBSP%d Register\n", mcbsp->id);
- return -2;
- }
- }
- }
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_pollwrite);
-
-int omap_mcbsp_pollread(unsigned int id, u16 *buf)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- /* if frame sync error - clear the error */
- if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) {
- /* clear error */
- MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1));
- /* resend */
- return -1;
- } else {
- /* wait for receive confirmation */
- int attemps = 0;
- while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) {
- if (attemps++ > 1000) {
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) &
- (~RRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) |
- (RRST));
- udelay(10);
- dev_err(mcbsp->dev, "Could not read from"
- " McBSP%d Register\n", mcbsp->id);
- return -2;
- }
- }
- }
- *buf = MCBSP_READ(mcbsp, DRR1);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_pollread);
-
-/*
- * IRQ based word transmission.
- */
-void omap_mcbsp_xmit_word(unsigned int id, u32 word)
-{
- struct omap_mcbsp *mcbsp;
- omap_mcbsp_word_length word_length;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
- word_length = mcbsp->tx_word_length;
-
- wait_for_completion(&mcbsp->tx_irq_completion);
-
- if (word_length > OMAP_MCBSP_WORD_16)
- MCBSP_WRITE(mcbsp, DXR2, word >> 16);
- MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
-}
-EXPORT_SYMBOL(omap_mcbsp_xmit_word);
-
-u32 omap_mcbsp_recv_word(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- u16 word_lsb, word_msb = 0;
- omap_mcbsp_word_length word_length;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- word_length = mcbsp->rx_word_length;
-
- wait_for_completion(&mcbsp->rx_irq_completion);
-
- if (word_length > OMAP_MCBSP_WORD_16)
- word_msb = MCBSP_READ(mcbsp, DRR2);
- word_lsb = MCBSP_READ(mcbsp, DRR1);
-
- return (word_lsb | (word_msb << 16));
-}
-EXPORT_SYMBOL(omap_mcbsp_recv_word);
-
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
-{
- struct omap_mcbsp *mcbsp;
- omap_mcbsp_word_length tx_word_length;
- omap_mcbsp_word_length rx_word_length;
- u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
- tx_word_length = mcbsp->tx_word_length;
- rx_word_length = mcbsp->rx_word_length;
-
- if (tx_word_length != rx_word_length)
- return -EINVAL;
-
- /* First we wait for the transmitter to be ready */
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- while (!(spcr2 & XRDY)) {
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- if (attempts++ > 1000) {
- /* We must reset the transmitter */
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d transmitter not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* Now we can push the data */
- if (tx_word_length > OMAP_MCBSP_WORD_16)
- MCBSP_WRITE(mcbsp, DXR2, word >> 16);
- MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
-
- /* We wait for the receiver to be ready */
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- while (!(spcr1 & RRDY)) {
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- if (attempts++ > 1000) {
- /* We must reset the receiver */
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d receiver not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* Receiver is ready, let's read the dummy data */
- if (rx_word_length > OMAP_MCBSP_WORD_16)
- word_msb = MCBSP_READ(mcbsp, DRR2);
- word_lsb = MCBSP_READ(mcbsp, DRR1);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
-
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
-{
- struct omap_mcbsp *mcbsp;
- u32 clock_word = 0;
- omap_mcbsp_word_length tx_word_length;
- omap_mcbsp_word_length rx_word_length;
- u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
-
- tx_word_length = mcbsp->tx_word_length;
- rx_word_length = mcbsp->rx_word_length;
-
- if (tx_word_length != rx_word_length)
- return -EINVAL;
-
- /* First we wait for the transmitter to be ready */
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- while (!(spcr2 & XRDY)) {
- spcr2 = MCBSP_READ(mcbsp, SPCR2);
- if (attempts++ > 1000) {
- /* We must reset the transmitter */
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR2,
- MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d transmitter not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* We first need to enable the bus clock */
- if (tx_word_length > OMAP_MCBSP_WORD_16)
- MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16);
- MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff);
-
- /* We wait for the receiver to be ready */
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- while (!(spcr1 & RRDY)) {
- spcr1 = MCBSP_READ(mcbsp, SPCR1);
- if (attempts++ > 1000) {
- /* We must reset the receiver */
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
- udelay(10);
- MCBSP_WRITE(mcbsp, SPCR1,
- MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
- udelay(10);
- dev_err(mcbsp->dev, "McBSP%d receiver not "
- "ready\n", mcbsp->id);
- return -EAGAIN;
- }
- }
-
- /* Receiver is ready, there is something for us */
- if (rx_word_length > OMAP_MCBSP_WORD_16)
- word_msb = MCBSP_READ(mcbsp, DRR2);
- word_lsb = MCBSP_READ(mcbsp, DRR1);
-
- word[0] = (word_lsb | (word_msb << 16));
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
-
-/*
- * Simple DMA based buffer rx/tx routines.
- * Nothing fancy, just a single buffer tx/rx through DMA.
- * The DMA resources are released once the transfer is done.
- * For anything fancier, you should use your own customized DMA
- * routines and callbacks.
- */
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
- unsigned int length)
-{
- struct omap_mcbsp *mcbsp;
- int dma_tx_ch;
- int src_port = 0;
- int dest_port = 0;
- int sync_dev = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX",
- omap_mcbsp_tx_dma_callback,
- mcbsp,
- &dma_tx_ch)) {
- dev_err(mcbsp->dev, " Unable to request DMA channel for "
- "McBSP%d TX. Trying IRQ based TX\n",
- mcbsp->id);
- return -EAGAIN;
- }
- mcbsp->dma_tx_lch = dma_tx_ch;
-
- dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id,
- dma_tx_ch);
-
- init_completion(&mcbsp->tx_dma_completion);
-
- if (cpu_class_is_omap1()) {
- src_port = OMAP_DMA_PORT_TIPB;
- dest_port = OMAP_DMA_PORT_EMIFF;
- }
- if (cpu_class_is_omap2())
- sync_dev = mcbsp->dma_tx_sync;
-
- omap_set_dma_transfer_params(mcbsp->dma_tx_lch,
- OMAP_DMA_DATA_TYPE_S16,
- length >> 1, 1,
- OMAP_DMA_SYNC_ELEMENT,
- sync_dev, 0);
-
- omap_set_dma_dest_params(mcbsp->dma_tx_lch,
- src_port,
- OMAP_DMA_AMODE_CONSTANT,
- mcbsp->phys_base + OMAP_MCBSP_REG_DXR1,
- 0, 0);
-
- omap_set_dma_src_params(mcbsp->dma_tx_lch,
- dest_port,
- OMAP_DMA_AMODE_POST_INC,
- buffer,
- 0, 0);
-
- omap_start_dma(mcbsp->dma_tx_lch);
- wait_for_completion(&mcbsp->tx_dma_completion);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
-
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
- unsigned int length)
-{
- struct omap_mcbsp *mcbsp;
- int dma_rx_ch;
- int src_port = 0;
- int dest_port = 0;
- int sync_dev = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX",
- omap_mcbsp_rx_dma_callback,
- mcbsp,
- &dma_rx_ch)) {
- dev_err(mcbsp->dev, "Unable to request DMA channel for "
- "McBSP%d RX. Trying IRQ based RX\n",
- mcbsp->id);
- return -EAGAIN;
- }
- mcbsp->dma_rx_lch = dma_rx_ch;
-
- dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id,
- dma_rx_ch);
-
- init_completion(&mcbsp->rx_dma_completion);
-
- if (cpu_class_is_omap1()) {
- src_port = OMAP_DMA_PORT_TIPB;
- dest_port = OMAP_DMA_PORT_EMIFF;
- }
- if (cpu_class_is_omap2())
- sync_dev = mcbsp->dma_rx_sync;
-
- omap_set_dma_transfer_params(mcbsp->dma_rx_lch,
- OMAP_DMA_DATA_TYPE_S16,
- length >> 1, 1,
- OMAP_DMA_SYNC_ELEMENT,
- sync_dev, 0);
-
- omap_set_dma_src_params(mcbsp->dma_rx_lch,
- src_port,
- OMAP_DMA_AMODE_CONSTANT,
- mcbsp->phys_base + OMAP_MCBSP_REG_DRR1,
- 0, 0);
-
- omap_set_dma_dest_params(mcbsp->dma_rx_lch,
- dest_port,
- OMAP_DMA_AMODE_POST_INC,
- buffer,
- 0, 0);
-
- omap_start_dma(mcbsp->dma_rx_lch);
- wait_for_completion(&mcbsp->rx_dma_completion);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
-
-/*
- * SPI wrapper.
- * Since SPI setup is much simpler than the generic McBSP one,
- * this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
- * Once this is done, you can call omap_mcbsp_start().
- */
-void omap_mcbsp_set_spi_mode(unsigned int id,
- const struct omap_mcbsp_spi_cfg *spi_cfg)
-{
- struct omap_mcbsp *mcbsp;
- struct omap_mcbsp_reg_cfg mcbsp_cfg;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
-
- /* SPI has only one frame */
- mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
- mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
-
- /* Clock stop mode */
- if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
- mcbsp_cfg.spcr1 |= (1 << 12);
- else
- mcbsp_cfg.spcr1 |= (3 << 11);
-
- /* Set clock parities */
- if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING)
- mcbsp_cfg.pcr0 |= CLKRP;
- else
- mcbsp_cfg.pcr0 &= ~CLKRP;
-
- if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING)
- mcbsp_cfg.pcr0 &= ~CLKXP;
- else
- mcbsp_cfg.pcr0 |= CLKXP;
-
- /* Set SCLKME to 0 and CLKSM to 1 */
- mcbsp_cfg.pcr0 &= ~SCLKME;
- mcbsp_cfg.srgr2 |= CLKSM;
-
- /* Set FSXP */
- if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH)
- mcbsp_cfg.pcr0 &= ~FSXP;
- else
- mcbsp_cfg.pcr0 |= FSXP;
-
- if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
- mcbsp_cfg.pcr0 |= CLKXM;
- mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1);
- mcbsp_cfg.pcr0 |= FSXM;
- mcbsp_cfg.srgr2 &= ~FSGM;
- mcbsp_cfg.xcr2 |= XDATDLY(1);
- mcbsp_cfg.rcr2 |= RDATDLY(1);
- } else {
- mcbsp_cfg.pcr0 &= ~CLKXM;
- mcbsp_cfg.srgr1 |= CLKGDV(1);
- mcbsp_cfg.pcr0 &= ~FSXM;
- mcbsp_cfg.xcr2 &= ~XDATDLY(3);
- mcbsp_cfg.rcr2 &= ~RDATDLY(3);
- }
-
- mcbsp_cfg.xcr2 &= ~XPHASE;
- mcbsp_cfg.rcr2 &= ~RPHASE;
-
- omap_mcbsp_config(id, &mcbsp_cfg);
-}
-EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
-
#ifdef CONFIG_ARCH_OMAP3
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
spin_lock_init(&mcbsp->lock);
mcbsp->id = id + 1;
mcbsp->free = true;
- mcbsp->dma_tx_lch = -1;
- mcbsp->dma_rx_lch = -1;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
if (!res) {
else
mcbsp->phys_dma_base = res->start;
- /* Default I/O is IRQ based */
- mcbsp->io_type = OMAP_MCBSP_IRQ_IO;
-
mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
projects / karo-tx-linux.git / commitdiff