performs the same operation).
"marvell,"aurora-outer-cache: Marvell Controller designed to be
compatible with the ARM one with outer cache mode.
+ "bcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
+ offset needs to be added to the address before passing down to the L2
+ cache controller
- cache-unified : Specifies the cache is a unified cache.
- cache-level : Should be set to 2 for a level 2 cache.
- reg : Physical base address and size of cache controller's memory mapped
and that the relevant menu configurations are displayed for
it.
+config ARCH_HAS_BANDGAP
+ bool
+
config GENERIC_HWEIGHT
bool
default y
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
+arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
endif
-arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
+arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t
+arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4
+arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3
+
+# Evaluate arch cc-option calls now
+arch-y := $(arch-y)
# This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI) :=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526) :=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_ARM7TDMI) =-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T) =-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI) =-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T) =-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E) =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM920T) =-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T) =-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T) =-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526) =-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110) =-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_XSC3) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_FEROCEON) =$(call cc-option,-mtune=marvell-f,-mtune=xscale)
+tune-$(CONFIG_CPU_V6) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+
+# Evaluate tune cc-option calls now
+tune-y := $(tune-y)
ifeq ($(CONFIG_AEABI),y)
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-%.dtb: scripts
+%.dtb: | scripts
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
+PHONY += dtbs
dtbs: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs
return fdt_getprop(fdt, offset, property, len);
}
+static uint32_t get_cell_size(const void *fdt)
+{
+ int len;
+ uint32_t cell_size = 1;
+ const uint32_t *size_len = getprop(fdt, "/", "#size-cells", &len);
+
+ if (size_len)
+ cell_size = fdt32_to_cpu(*size_len);
+ return cell_size;
+}
+
static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
{
char cmdline[COMMAND_LINE_SIZE];
int atags_to_fdt(void *atag_list, void *fdt, int total_space)
{
struct tag *atag = atag_list;
- uint32_t mem_reg_property[2 * NR_BANKS];
+ /* In the case of 64 bits memory size, need to reserve 2 cells for
+ * address and size for each bank */
+ uint32_t mem_reg_property[2 * 2 * NR_BANKS];
int memcount = 0;
- int ret;
+ int ret, memsize;
/* make sure we've got an aligned pointer */
if ((u32)atag_list & 0x3)
continue;
if (!atag->u.mem.size)
continue;
- mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
- mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+ memsize = get_cell_size(fdt);
+
+ if (memsize == 2) {
+ /* if memsize is 2, that means that
+ * each data needs 2 cells of 32 bits,
+ * so the data are 64 bits */
+ uint64_t *mem_reg_prop64 =
+ (uint64_t *)mem_reg_property;
+ mem_reg_prop64[memcount++] =
+ cpu_to_fdt64(atag->u.mem.start);
+ mem_reg_prop64[memcount++] =
+ cpu_to_fdt64(atag->u.mem.size);
+ } else {
+ mem_reg_property[memcount++] =
+ cpu_to_fdt32(atag->u.mem.start);
+ mem_reg_property[memcount++] =
+ cpu_to_fdt32(atag->u.mem.size);
+ }
+
} else if (atag->hdr.tag == ATAG_INITRD2) {
uint32_t initrd_start, initrd_size;
initrd_start = atag->u.initrd.start;
}
}
- if (memcount)
- setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+ if (memcount) {
+ setprop(fdt, "/memory", "reg", mem_reg_property,
+ 4 * memcount * memsize);
+ }
return fdt_pack(fdt);
}
mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
-#ifndef __ARM_ARCH_2__
/*
* Booting from Angel - need to enter SVC mode and disable
* FIQs/IRQs (numeric definitions from angel arm.h source).
safe_svcmode_maskall r0
msr spsr_cxsf, r9 @ Save the CPU boot mode in
@ SPSR
-#else
- teqp pc, #0x0c000003 @ turn off interrupts
-#endif
-
/*
* Note that some cache flushing and other stuff may
* be needed here - is there an Angel SWI call for this?
ldr r4, =zreladdr
#endif
- bl cache_on
+ /*
+ * Set up a page table only if it won't overwrite ourself.
+ * That means r4 < pc && r4 - 16k page directory > &_end.
+ * Given that r4 > &_end is most unfrequent, we add a rough
+ * additional 1MB of room for a possible appended DTB.
+ */
+ mov r0, pc
+ cmp r0, r4
+ ldrcc r0, LC0+32
+ addcc r0, r0, pc
+ cmpcc r4, r0
+ orrcc r4, r4, #1 @ remember we skipped cache_on
+ blcs cache_on
restart: adr r0, LC0
ldmia r0, {r1, r2, r3, r6, r10, r11, r12}
* r0 = delta
* r2 = BSS start
* r3 = BSS end
- * r4 = final kernel address
+ * r4 = final kernel address (possibly with LSB set)
* r5 = appended dtb size (still unknown)
* r6 = _edata
* r7 = architecture ID
*/
cmp r0, #1
sub r0, r4, #TEXT_OFFSET
+ bic r0, r0, #1
add r0, r0, #0x100
mov r1, r6
sub r2, sp, r6
/*
* Check to see if we will overwrite ourselves.
- * r4 = final kernel address
+ * r4 = final kernel address (possibly with LSB set)
* r9 = size of decompressed image
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
* r4 - 16k page directory >= r10 -> OK
* r4 + image length <= address of wont_overwrite -> OK
+ * Note: the possible LSB in r4 is harmless here.
*/
add r10, r10, #16384
cmp r4, r10
add sp, sp, r6
#endif
- bl cache_clean_flush
+ tst r4, #1
+ bleq cache_clean_flush
adr r0, BSYM(restart)
add r0, r0, r6
* r0 = delta
* r2 = BSS start
* r3 = BSS end
- * r4 = kernel execution address
+ * r4 = kernel execution address (possibly with LSB set)
* r5 = appended dtb size (0 if not present)
* r7 = architecture ID
* r8 = atags pointer
cmp r2, r3
blo 1b
+ /*
+ * Did we skip the cache setup earlier?
+ * That is indicated by the LSB in r4.
+ * Do it now if so.
+ */
+ tst r4, #1
+ bic r4, r4, #1
+ blne cache_on
+
/*
* The C runtime environment should now be setup sufficiently.
* Set up some pointers, and start decompressing.
.word _got_start @ r11
.word _got_end @ ip
.word .L_user_stack_end @ sp
+ .word _end - restart + 16384 + 1024*1024
.size LC0, . - LC0
#ifdef CONFIG_ARCH_RPC
};
L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0x3ff20000 0x1000>;
- cache-unified;
- cache-level = <2>;
+ compatible = "bcm,bcm11351-a2-pl310-cache";
+ reg = <0x3ff20000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
};
timer@35006000 {
1901: adr r0, 1902b
bl printascii
mov r0, r9
- bl printhex8
+ bl printhex2
adr r0, 1903b
bl printascii
mov r0, r10
- bl printhex8
+ bl printhex2
adr r0, 1904b
bl printascii
#endif
#include <asm/smp.h>
#include <asm/smp_plat.h>
-static void __init simple_smp_init_cpus(void)
-{
-}
-
static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned int mpidr, pcpu, pcluster, ret;
#endif
static struct smp_operations __initdata mcpm_smp_ops = {
- .smp_init_cpus = simple_smp_init_cpus,
.smp_boot_secondary = mcpm_boot_secondary,
.smp_secondary_init = mcpm_secondary_init,
#ifdef CONFIG_HOTPLUG_CPU
__rem; \
})
-#if __GNUC__ < 4
+#if __GNUC__ < 4 || !defined(CONFIG_AEABI)
/*
* gcc versions earlier than 4.0 are simply too problematic for the
*/
extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long,
size_t, unsigned int, void *);
-extern void __iomem *__arm_ioremap_caller(unsigned long, size_t, unsigned int,
+extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
void *);
extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap(unsigned long, size_t, unsigned int);
-extern void __iomem *__arm_ioremap_exec(unsigned long, size_t, bool cached);
+extern void __iomem *__arm_ioremap(phys_addr_t, size_t, unsigned int);
+extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
extern void __iounmap(volatile void __iomem *addr);
extern void __arm_iounmap(volatile void __iomem *addr);
-extern void __iomem * (*arch_ioremap_caller)(unsigned long, size_t,
+extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
unsigned int, void *);
extern void (*arch_iounmap)(volatile void __iomem *);
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/proc-fns.h>
+#include <asm/smp_plat.h>
#include <asm-generic/mm_hooks.h>
void __check_vmalloc_seq(struct mm_struct *mm);
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
-DECLARE_PER_CPU(atomic64_t, active_asids);
+#ifdef CONFIG_ARM_ERRATA_798181
+void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
+ cpumask_t *mask);
+#else /* !CONFIG_ARM_ERRATA_798181 */
+static inline void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
+ cpumask_t *mask)
+{
+}
+#endif /* CONFIG_ARM_ERRATA_798181 */
#else /* !CONFIG_CPU_HAS_ASID */
#ifdef CONFIG_MMU
unsigned int cpu = smp_processor_id();
-#ifdef CONFIG_SMP
- /* check for possible thread migration */
- if (!cpumask_empty(mm_cpumask(next)) &&
+ /*
+ * __sync_icache_dcache doesn't broadcast the I-cache invalidation,
+ * so check for possible thread migration and invalidate the I-cache
+ * if we're new to this CPU.
+ */
+ if (cache_ops_need_broadcast() &&
+ !cpumask_empty(mm_cpumask(next)) &&
!cpumask_test_cpu(cpu, mm_cpumask(next)))
__flush_icache_all();
-#endif
+
if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
check_and_switch_context(next, tsk);
if (cache_is_vivt())
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
- unsigned long tmp;
+ unsigned long contended, res;
u32 slock;
- __asm__ __volatile__(
-" ldrex %0, [%2]\n"
-" subs %1, %0, %0, ror #16\n"
-" addeq %0, %0, %3\n"
-" strexeq %1, %0, [%2]"
- : "=&r" (slock), "=&r" (tmp)
- : "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
- : "cc");
-
- if (tmp == 0) {
+ do {
+ __asm__ __volatile__(
+ " ldrex %0, [%3]\n"
+ " mov %2, #0\n"
+ " subs %1, %0, %0, ror #16\n"
+ " addeq %0, %0, %4\n"
+ " strexeq %2, %0, [%3]"
+ : "=&r" (slock), "=&r" (contended), "=r" (res)
+ : "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
+ : "cc");
+ } while (res);
+
+ if (!contended) {
smp_mb();
return 1;
} else {
struct cpu_context_save cpu_context; /* cpu context */
__u32 syscall; /* syscall number */
__u8 used_cp[16]; /* thread used copro */
- unsigned long tp_value;
+ unsigned long tp_value[2]; /* TLS registers */
#ifdef CONFIG_CRUNCH
struct crunch_state crunchstate;
#endif
#define __ASMARM_TLS_H
#ifdef __ASSEMBLY__
- .macro set_tls_none, tp, tmp1, tmp2
+#include <asm/asm-offsets.h>
+ .macro switch_tls_none, base, tp, tpuser, tmp1, tmp2
.endm
- .macro set_tls_v6k, tp, tmp1, tmp2
+ .macro switch_tls_v6k, base, tp, tpuser, tmp1, tmp2
+ mrc p15, 0, \tmp2, c13, c0, 2 @ get the user r/w register
mcr p15, 0, \tp, c13, c0, 3 @ set TLS register
- mov \tmp1, #0
- mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
+ mcr p15, 0, \tpuser, c13, c0, 2 @ and the user r/w register
+ str \tmp2, [\base, #TI_TP_VALUE + 4] @ save it
.endm
- .macro set_tls_v6, tp, tmp1, tmp2
+ .macro switch_tls_v6, base, tp, tpuser, tmp1, tmp2
ldr \tmp1, =elf_hwcap
ldr \tmp1, [\tmp1, #0]
mov \tmp2, #0xffff0fff
tst \tmp1, #HWCAP_TLS @ hardware TLS available?
- mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register
- movne \tmp1, #0
- mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register
streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0
+ mrcne p15, 0, \tmp2, c13, c0, 2 @ get the user r/w register
+ mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register
+ mcrne p15, 0, \tpuser, c13, c0, 2 @ set user r/w register
+ strne \tmp2, [\base, #TI_TP_VALUE + 4] @ save it
.endm
- .macro set_tls_software, tp, tmp1, tmp2
+ .macro switch_tls_software, base, tp, tpuser, tmp1, tmp2
mov \tmp1, #0xffff0fff
str \tp, [\tmp1, #-15] @ set TLS value at 0xffff0ff0
.endm
#ifdef CONFIG_TLS_REG_EMUL
#define tls_emu 1
#define has_tls_reg 1
-#define set_tls set_tls_none
+#define switch_tls switch_tls_none
#elif defined(CONFIG_CPU_V6)
#define tls_emu 0
#define has_tls_reg (elf_hwcap & HWCAP_TLS)
-#define set_tls set_tls_v6
+#define switch_tls switch_tls_v6
#elif defined(CONFIG_CPU_32v6K)
#define tls_emu 0
#define has_tls_reg 1
-#define set_tls set_tls_v6k
+#define switch_tls switch_tls_v6k
#else
#define tls_emu 0
#define has_tls_reg 0
-#define set_tls set_tls_software
+#define switch_tls switch_tls_software
#endif
+#ifndef __ASSEMBLY__
+static inline unsigned long get_tpuser(void)
+{
+ unsigned long reg = 0;
+
+ if (has_tls_reg && !tls_emu)
+ __asm__("mrc p15, 0, %0, c13, c0, 2" : "=r" (reg));
+
+ return reg;
+}
+#endif
#endif /* __ASMARM_TLS_H */
UNWIND(.fnstart )
UNWIND(.cantunwind )
add ip, r1, #TI_CPU_SAVE
- ldr r3, [r2, #TI_TP_VALUE]
ARM( stmia ip!, {r4 - sl, fp, sp, lr} ) @ Store most regs on stack
THUMB( stmia ip!, {r4 - sl, fp} ) @ Store most regs on stack
THUMB( str sp, [ip], #4 )
THUMB( str lr, [ip], #4 )
+ ldr r4, [r2, #TI_TP_VALUE]
+ ldr r5, [r2, #TI_TP_VALUE + 4]
#ifdef CONFIG_CPU_USE_DOMAINS
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
- set_tls r3, r4, r5
+ switch_tls r1, r4, r5, r3, r7
#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
ldr r7, [r2, #TI_TASK]
ldr r8, =__stack_chk_guard
str r0, [sp, #S_OLD_R0] @ Save OLD_R0
zero_fp
+#ifdef CONFIG_ALIGNMENT_TRAP
+ ldr ip, __cr_alignment
+ ldr ip, [ip]
+ mcr p15, 0, ip, c1, c0 @ update control register
+#endif
+
+ enable_irq
+ ct_user_exit
+ get_thread_info tsk
+
/*
* Get the system call number.
*/
#ifdef CONFIG_ARM_THUMB
tst r8, #PSR_T_BIT
movne r10, #0 @ no thumb OABI emulation
- ldreq r10, [lr, #-4] @ get SWI instruction
+ USER( ldreq r10, [lr, #-4] ) @ get SWI instruction
#else
- ldr r10, [lr, #-4] @ get SWI instruction
+ USER( ldr r10, [lr, #-4] ) @ get SWI instruction
#endif
#ifdef CONFIG_CPU_ENDIAN_BE8
rev r10, r10 @ little endian instruction
/* Legacy ABI only, possibly thumb mode. */
tst r8, #PSR_T_BIT @ this is SPSR from save_user_regs
addne scno, r7, #__NR_SYSCALL_BASE @ put OS number in
- ldreq scno, [lr, #-4]
+ USER( ldreq scno, [lr, #-4] )
#else
/* Legacy ABI only. */
- ldr scno, [lr, #-4] @ get SWI instruction
+ USER( ldr scno, [lr, #-4] ) @ get SWI instruction
#endif
-#ifdef CONFIG_ALIGNMENT_TRAP
- ldr ip, __cr_alignment
- ldr ip, [ip]
- mcr p15, 0, ip, c1, c0 @ update control register
-#endif
- enable_irq
- ct_user_exit
-
- get_thread_info tsk
adr tbl, sys_call_table @ load syscall table pointer
#if defined(CONFIG_OABI_COMPAT)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
+
+#if defined(CONFIG_OABI_COMPAT) || !defined(CONFIG_AEABI)
+ /*
+ * We failed to handle a fault trying to access the page
+ * containing the swi instruction, but we're not really in a
+ * position to return -EFAULT. Instead, return back to the
+ * instruction and re-enter the user fault handling path trying
+ * to page it in. This will likely result in sending SEGV to the
+ * current task.
+ */
+9001:
+ sub lr, lr, #4
+ str lr, [sp, #S_PC]
+ b ret_fast_syscall
+#endif
ENDPROC(vector_swi)
/*
return;
}
+ perf_callchain_store(entry, regs->ARM_pc);
tail = (struct frame_tail __user *)regs->ARM_fp - 1;
while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
#include <asm/thread_notify.h>
#include <asm/stacktrace.h>
#include <asm/mach/time.h>
+#include <asm/tls.h>
#ifdef CONFIG_CC_STACKPROTECTOR
#include <linux/stackprotector.h>
clear_ptrace_hw_breakpoint(p);
if (clone_flags & CLONE_SETTLS)
- thread->tp_value = childregs->ARM_r3;
+ thread->tp_value[0] = childregs->ARM_r3;
+ thread->tp_value[1] = get_tpuser();
thread_notify(THREAD_NOTIFY_COPY, thread);
#endif
case PTRACE_GET_THREAD_AREA:
- ret = put_user(task_thread_info(child)->tp_value,
+ ret = put_user(task_thread_info(child)->tp_value[0],
datap);
break;
for (i = 1; i < nr_cpu_ids; ++i)
cpu_logical_map(i) = i == cpu ? 0 : i;
+ /*
+ * clear __my_cpu_offset on boot CPU to avoid hang caused by
+ * using percpu variable early, for example, lockdep will
+ * access percpu variable inside lock_release
+ */
+ set_my_cpu_offset(0);
+
printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr);
}
static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
{
- int cpu, this_cpu;
+ int this_cpu;
cpumask_t mask = { CPU_BITS_NONE };
if (!erratum_a15_798181())
dummy_flush_tlb_a15_erratum();
this_cpu = get_cpu();
- for_each_online_cpu(cpu) {
- if (cpu == this_cpu)
- continue;
- /*
- * We only need to send an IPI if the other CPUs are running
- * the same ASID as the one being invalidated. There is no
- * need for locking around the active_asids check since the
- * switch_mm() function has at least one dmb() (as required by
- * this workaround) in case a context switch happens on
- * another CPU after the condition below.
- */
- if (atomic64_read(&mm->context.id) ==
- atomic64_read(&per_cpu(active_asids, cpu)))
- cpumask_set_cpu(cpu, &mask);
- }
+ a15_erratum_get_cpumask(this_cpu, mm, &mask);
smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
put_cpu();
}
return regs->ARM_r0;
case NR(set_tls):
- thread->tp_value = regs->ARM_r0;
+ thread->tp_value[0] = regs->ARM_r0;
if (tls_emu)
return 0;
if (has_tls_reg) {
int reg = (instr >> 12) & 15;
if (reg == 15)
return 1;
- regs->uregs[reg] = current_thread_info()->tp_value;
+ regs->uregs[reg] = current_thread_info()->tp_value[0];
regs->ARM_pc += 4;
return 0;
}
iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
}
-static void __iomem *ebsa110_ioremap_caller(unsigned long cookie, size_t size,
+static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
unsigned int flags, void *caller)
{
return (void __iomem *)cookie;
: "=r" (reg));
}
-static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
+static void __iomem *imx3_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
if (mtype == MT_DEVICE) {
#include "pci.h"
-static void __iomem *__iop13xx_ioremap_caller(unsigned long cookie,
+static void __iomem *__iop13xx_ioremap_caller(phys_addr_t cookie,
size_t size, unsigned int mtype, void *caller)
{
void __iomem * retval;
* fallback to the default.
*/
-static void __iomem *ixp4xx_ioremap_caller(unsigned long addr, size_t size,
+static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
unsigned int mtype, void *caller)
{
if (!is_pci_memory(addr))
extern void msm_map_msm8960_io(void);
extern void msm_map_qsd8x50_io(void);
-extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
+extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
}
#endif /* CONFIG_ARCH_MSM7X30 */
-void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size,
+void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
if (mtype == MT_DEVICE) {
config ARCH_OMAP2PLUS
bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
}
}
+/*
+ * For certain Broadcom SoCs, depending on the address range, different offsets
+ * need to be added to the address before passing it to L2 for
+ * invalidation/clean/flush
+ *
+ * Section Address Range Offset EMI
+ * 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC
+ * 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS
+ * 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC
+ *
+ * When the start and end addresses have crossed two different sections, we
+ * need to break the L2 operation into two, each within its own section.
+ * For example, if we need to invalidate addresses starts at 0xBFFF0000 and
+ * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2)
+ * 0xC0000000 - 0xC0001000
+ *
+ * Note 1:
+ * By breaking a single L2 operation into two, we may potentially suffer some
+ * performance hit, but keep in mind the cross section case is very rare
+ *
+ * Note 2:
+ * We do not need to handle the case when the start address is in
+ * Section 1 and the end address is in Section 3, since it is not a valid use
+ * case
+ *
+ * Note 3:
+ * Section 1 in practical terms can no longer be used on rev A2. Because of
+ * that the code does not need to handle section 1 at all.
+ *
+ */
+#define BCM_SYS_EMI_START_ADDR 0x40000000UL
+#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL
+
+#define BCM_SYS_EMI_OFFSET 0x40000000UL
+#define BCM_VC_EMI_OFFSET 0x80000000UL
+
+static inline int bcm_addr_is_sys_emi(unsigned long addr)
+{
+ return (addr >= BCM_SYS_EMI_START_ADDR) &&
+ (addr < BCM_VC_EMI_SEC3_START_ADDR);
+}
+
+static inline unsigned long bcm_l2_phys_addr(unsigned long addr)
+{
+ if (bcm_addr_is_sys_emi(addr))
+ return addr + BCM_SYS_EMI_OFFSET;
+ else
+ return addr + BCM_VC_EMI_OFFSET;
+}
+
+static void bcm_inv_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2x0_inv_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2x0_inv_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
+static void bcm_clean_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ if ((end - start) >= l2x0_size) {
+ l2x0_clean_all();
+ return;
+ }
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2x0_clean_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2x0_clean_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
+static void bcm_flush_range(unsigned long start, unsigned long end)
+{
+ unsigned long new_start, new_end;
+
+ BUG_ON(start < BCM_SYS_EMI_START_ADDR);
+
+ if (unlikely(end <= start))
+ return;
+
+ if ((end - start) >= l2x0_size) {
+ l2x0_flush_all();
+ return;
+ }
+
+ new_start = bcm_l2_phys_addr(start);
+ new_end = bcm_l2_phys_addr(end);
+
+ /* normal case, no cross section between start and end */
+ if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) {
+ l2x0_flush_range(new_start, new_end);
+ return;
+ }
+
+ /* They cross sections, so it can only be a cross from section
+ * 2 to section 3
+ */
+ l2x0_flush_range(new_start,
+ bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1));
+ l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR),
+ new_end);
+}
+
static void __init l2x0_of_setup(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
},
};
+static const struct l2x0_of_data bcm_l2x0_data = {
+ .setup = pl310_of_setup,
+ .save = pl310_save,
+ .outer_cache = {
+ .resume = pl310_resume,
+ .inv_range = bcm_inv_range,
+ .clean_range = bcm_clean_range,
+ .flush_range = bcm_flush_range,
+ .sync = l2x0_cache_sync,
+ .flush_all = l2x0_flush_all,
+ .inv_all = l2x0_inv_all,
+ .disable = l2x0_disable,
+ },
+};
+
static const struct of_device_id l2x0_ids[] __initconst = {
{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
.data = (void *)&aurora_no_outer_data},
{ .compatible = "marvell,aurora-outer-cache",
.data = (void *)&aurora_with_outer_data},
+ { .compatible = "bcm,bcm11351-a2-pl310-cache",
+ .data = (void *)&bcm_l2x0_data},
{}
};
* non 64-bit operations.
*/
#define ASID_FIRST_VERSION (1ULL << ASID_BITS)
-#define NUM_USER_ASIDS (ASID_FIRST_VERSION - 1)
-
-#define ASID_TO_IDX(asid) ((asid & ~ASID_MASK) - 1)
-#define IDX_TO_ASID(idx) ((idx + 1) & ~ASID_MASK)
+#define NUM_USER_ASIDS ASID_FIRST_VERSION
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
-DEFINE_PER_CPU(atomic64_t, active_asids);
+static DEFINE_PER_CPU(atomic64_t, active_asids);
static DEFINE_PER_CPU(u64, reserved_asids);
static cpumask_t tlb_flush_pending;
+#ifdef CONFIG_ARM_ERRATA_798181
+void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
+ cpumask_t *mask)
+{
+ int cpu;
+ unsigned long flags;
+ u64 context_id, asid;
+
+ raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+ context_id = mm->context.id.counter;
+ for_each_online_cpu(cpu) {
+ if (cpu == this_cpu)
+ continue;
+ /*
+ * We only need to send an IPI if the other CPUs are
+ * running the same ASID as the one being invalidated.
+ */
+ asid = per_cpu(active_asids, cpu).counter;
+ if (asid == 0)
+ asid = per_cpu(reserved_asids, cpu);
+ if (context_id == asid)
+ cpumask_set_cpu(cpu, mask);
+ }
+ raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
+}
+#endif
+
#ifdef CONFIG_ARM_LPAE
static void cpu_set_reserved_ttbr0(void)
{
asid = 0;
} else {
asid = atomic64_xchg(&per_cpu(active_asids, i), 0);
- __set_bit(ASID_TO_IDX(asid), asid_map);
+ /*
+ * If this CPU has already been through a
+ * rollover, but hasn't run another task in
+ * the meantime, we must preserve its reserved
+ * ASID, as this is the only trace we have of
+ * the process it is still running.
+ */
+ if (asid == 0)
+ asid = per_cpu(reserved_asids, i);
+ __set_bit(asid & ~ASID_MASK, asid_map);
}
per_cpu(reserved_asids, i) = asid;
}
/*
* Allocate a free ASID. If we can't find one, take a
* note of the currently active ASIDs and mark the TLBs
- * as requiring flushes.
+ * as requiring flushes. We always count from ASID #1,
+ * as we reserve ASID #0 to switch via TTBR0 and indicate
+ * rollover events.
*/
- asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS);
+ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
if (asid == NUM_USER_ASIDS) {
generation = atomic64_add_return(ASID_FIRST_VERSION,
&asid_generation);
flush_context(cpu);
- asid = find_first_zero_bit(asid_map, NUM_USER_ASIDS);
+ asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
}
__set_bit(asid, asid_map);
- asid = generation | IDX_TO_ASID(asid);
+ asid |= generation;
cpumask_clear(mm_cpumask(mm));
}
dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
/*
- * Mark the D-cache clean for this page to avoid extra flushing.
+ * Mark the D-cache clean for these pages to avoid extra flushing.
*/
- if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE)
- set_bit(PG_dcache_clean, &page->flags);
+ if (dir != DMA_TO_DEVICE && size >= PAGE_SIZE) {
+ unsigned long pfn;
+ size_t left = size;
+
+ pfn = page_to_pfn(page) + off / PAGE_SIZE;
+ off %= PAGE_SIZE;
+ if (off) {
+ pfn++;
+ left -= PAGE_SIZE - off;
+ }
+ while (left >= PAGE_SIZE) {
+ page = pfn_to_page(pfn++);
+ set_bit(PG_dcache_clean, &page->flags);
+ left -= PAGE_SIZE;
+ }
+ }
}
/**
mapping = page_mapping(page);
if (!cache_ops_need_broadcast() &&
- mapping && !mapping_mapped(mapping))
+ mapping && !page_mapped(page))
clear_bit(PG_dcache_clean, &page->flags);
else {
__flush_dcache_page(mapping, page);
return (void __iomem *) (offset + addr);
}
-void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
+void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
- unsigned long last_addr;
+ phys_addr_t last_addr;
unsigned long offset = phys_addr & ~PAGE_MASK;
unsigned long pfn = __phys_to_pfn(phys_addr);
}
EXPORT_SYMBOL(__arm_ioremap_pfn);
-void __iomem * (*arch_ioremap_caller)(unsigned long, size_t,
+void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
unsigned int, void *) =
__arm_ioremap_caller;
void __iomem *
-__arm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+__arm_ioremap(phys_addr_t phys_addr, size_t size, unsigned int mtype)
{
return arch_ioremap_caller(phys_addr, size, mtype,
__builtin_return_address(0));
* CONFIG_GENERIC_ALLOCATOR for allocating external memory.
*/
void __iomem *
-__arm_ioremap_exec(unsigned long phys_addr, size_t size, bool cached)
+__arm_ioremap_exec(phys_addr_t phys_addr, size_t size, bool cached)
{
unsigned int mtype;
return __arm_ioremap_pfn(pfn, offset, size, mtype);
}
-void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
+void __iomem *__arm_ioremap(phys_addr_t phys_addr, size_t size,
unsigned int mtype)
{
return (void __iomem *)phys_addr;
}
EXPORT_SYMBOL(__arm_ioremap);
-void __iomem * (*arch_ioremap_caller)(unsigned long, size_t, unsigned int, void *);
+void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *);
-void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
+void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller)
{
return __arm_ioremap(phys_addr, size, mtype);
#include <linux/linkage.h>
#include <linux/init.h>
- __INIT
-
/*
* Realview/Versatile Express specific entry point for secondary CPUs.
* This provides a "holding pen" into which all secondary cores are held
* @pwrreg_powerup: power up value for MMCIPOWER register
* @signal_direction: input/out direction of bus signals can be indicated
* @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
+ * @busy_detect: true if busy detection on dat0 is supported
*/
struct variant_data {
unsigned int clkreg;
u32 pwrreg_powerup;
bool signal_direction;
bool pwrreg_clkgate;
+ bool busy_detect;
};
static struct variant_data variant_arm = {
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
.pwrreg_clkgate = true,
+ .busy_detect = true,
};
static struct variant_data variant_ux500v2 = {
.pwrreg_powerup = MCI_PWR_ON,
.signal_direction = true,
.pwrreg_clkgate = true,
+ .busy_detect = true,
};
+static int mmci_card_busy(struct mmc_host *mmc)
+{
+ struct mmci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ int busy = 0;
+
+ pm_runtime_get_sync(mmc_dev(mmc));
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (readl(host->base + MMCISTATUS) & MCI_ST_CARDBUSY)
+ busy = 1;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
+
+ return busy;
+}
+
/*
* Validate mmc prerequisites
*/
}
}
+/*
+ * This must be called with host->lock held
+ */
+static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl)
+{
+ /* Keep ST Micro busy mode if enabled */
+ datactrl |= host->datactrl_reg & MCI_ST_DPSM_BUSYMODE;
+
+ if (host->datactrl_reg != datactrl) {
+ host->datactrl_reg = datactrl;
+ writel(datactrl, host->base + MMCIDATACTRL);
+ }
+}
+
/*
* This must be called with host->lock held
*/
struct variant_data *variant = host->variant;
u32 clk = variant->clkreg;
+ /* Make sure cclk reflects the current calculated clock */
+ host->cclk = 0;
+
if (desired) {
if (desired >= host->mclk) {
clk = MCI_CLK_BYPASS;
/* clk |= MCI_CLK_PWRSAVE; */
}
+ /* Set actual clock for debug */
+ host->mmc->actual_clock = host->cclk;
+
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
clk |= MCI_4BIT_BUS;
if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8)
static void mmci_stop_data(struct mmci_host *host)
{
- writel(0, host->base + MMCIDATACTRL);
+ mmci_write_datactrlreg(host, 0);
mmci_set_mask1(host, 0);
host->data = NULL;
}
const char *rxname, *txname;
dma_cap_mask_t mask;
- if (!plat || !plat->dma_filter) {
- dev_info(mmc_dev(host->mmc), "no DMA platform data\n");
- return;
- }
+ host->dma_rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "rx");
+ host->dma_tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), "tx");
/* initialize pre request cookie */
host->next_data.cookie = 1;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- /*
- * If only an RX channel is specified, the driver will
- * attempt to use it bidirectionally, however if it is
- * is specified but cannot be located, DMA will be disabled.
- */
- if (plat->dma_rx_param) {
- host->dma_rx_channel = dma_request_channel(mask,
+ if (plat && plat->dma_filter) {
+ if (!host->dma_rx_channel && plat->dma_rx_param) {
+ host->dma_rx_channel = dma_request_channel(mask,
plat->dma_filter,
plat->dma_rx_param);
- /* E.g if no DMA hardware is present */
- if (!host->dma_rx_channel)
- dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
- }
+ /* E.g if no DMA hardware is present */
+ if (!host->dma_rx_channel)
+ dev_err(mmc_dev(host->mmc), "no RX DMA channel\n");
+ }
- if (plat->dma_tx_param) {
- host->dma_tx_channel = dma_request_channel(mask,
+ if (!host->dma_tx_channel && plat->dma_tx_param) {
+ host->dma_tx_channel = dma_request_channel(mask,
plat->dma_filter,
plat->dma_tx_param);
- if (!host->dma_tx_channel)
- dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
- } else {
- host->dma_tx_channel = host->dma_rx_channel;
+ if (!host->dma_tx_channel)
+ dev_warn(mmc_dev(host->mmc), "no TX DMA channel\n");
+ }
}
+ /*
+ * If only an RX channel is specified, the driver will
+ * attempt to use it bidirectionally, however if it is
+ * is specified but cannot be located, DMA will be disabled.
+ */
+ if (host->dma_rx_channel && !host->dma_tx_channel)
+ host->dma_tx_channel = host->dma_rx_channel;
+
if (host->dma_rx_channel)
rxname = dma_chan_name(host->dma_rx_channel);
else
datactrl |= MCI_DPSM_DMAENABLE;
/* Trigger the DMA transfer */
- writel(datactrl, host->base + MMCIDATACTRL);
+ mmci_write_datactrlreg(host, datactrl);
/*
* Let the MMCI say when the data is ended and it's time
irqmask = MCI_TXFIFOHALFEMPTYMASK;
}
- writel(datactrl, base + MMCIDATACTRL);
+ mmci_write_datactrlreg(host, datactrl);
writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
mmci_set_mask1(host, irqmask);
}
/* The error clause is handled above, success! */
data->bytes_xfered = data->blksz * data->blocks;
- if (!data->stop) {
+ if (!data->stop || host->mrq->sbc) {
mmci_request_end(host, data->mrq);
} else {
mmci_start_command(host, data->stop, 0);
unsigned int status)
{
void __iomem *base = host->base;
+ bool sbc = (cmd == host->mrq->sbc);
host->cmd = NULL;
cmd->resp[3] = readl(base + MMCIRESPONSE3);
}
- if (!cmd->data || cmd->error) {
+ if ((!sbc && !cmd->data) || cmd->error) {
if (host->data) {
/* Terminate the DMA transfer */
if (dma_inprogress(host)) {
}
mmci_stop_data(host);
}
- mmci_request_end(host, cmd->mrq);
+ mmci_request_end(host, host->mrq);
+ } else if (sbc) {
+ mmci_start_command(host, host->mrq->cmd, 0);
} else if (!(cmd->data->flags & MMC_DATA_READ)) {
mmci_start_data(host, cmd->data);
}
if (mrq->data && mrq->data->flags & MMC_DATA_READ)
mmci_start_data(host, mrq->data);
- mmci_start_command(host, mrq->cmd, 0);
+ if (mrq->sbc)
+ mmci_start_command(host, mrq->sbc, 0);
+ else
+ mmci_start_command(host, mrq->cmd, 0);
spin_unlock_irqrestore(&host->lock, flags);
}
if (!IS_ERR(mmc->supply.vmmc))
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
- if (!IS_ERR(mmc->supply.vqmmc) &&
- regulator_is_enabled(mmc->supply.vqmmc))
+ if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
regulator_disable(mmc->supply.vqmmc);
+ host->vqmmc_enabled = false;
+ }
break;
case MMC_POWER_UP:
break;
case MMC_POWER_ON:
- if (!IS_ERR(mmc->supply.vqmmc) &&
- !regulator_is_enabled(mmc->supply.vqmmc)) {
+ if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
ret = regulator_enable(mmc->supply.vqmmc);
if (ret < 0)
dev_err(mmc_dev(mmc),
"failed to enable vqmmc regulator\n");
+ else
+ host->vqmmc_enabled = true;
}
pwr |= MCI_PWR_ON;
return status;
}
+static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ int ret = 0;
+
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+
+ pm_runtime_get_sync(mmc_dev(mmc));
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
+ 2700000, 3600000);
+ break;
+ case MMC_SIGNAL_VOLTAGE_180:
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
+ 1700000, 1950000);
+ break;
+ case MMC_SIGNAL_VOLTAGE_120:
+ ret = regulator_set_voltage(mmc->supply.vqmmc,
+ 1100000, 1300000);
+ break;
+ }
+
+ if (ret)
+ dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
+
+ pm_runtime_mark_last_busy(mmc_dev(mmc));
+ pm_runtime_put_autosuspend(mmc_dev(mmc));
+ }
+
+ return ret;
+}
+
static irqreturn_t mmci_cd_irq(int irq, void *dev_id)
{
struct mmci_host *host = dev_id;
return IRQ_HANDLED;
}
-static const struct mmc_host_ops mmci_ops = {
+static struct mmc_host_ops mmci_ops = {
.request = mmci_request,
.pre_req = mmci_pre_request,
.post_req = mmci_post_request,
.set_ios = mmci_set_ios,
.get_ro = mmci_get_ro,
.get_cd = mmci_get_cd,
+ .start_signal_voltage_switch = mmci_sig_volt_switch,
};
#ifdef CONFIG_OF
dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer);
dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision);
- host->clk = clk_get(&dev->dev, NULL);
+ host->clk = devm_clk_get(&dev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
- host->clk = NULL;
goto host_free;
}
ret = clk_prepare_enable(host->clk);
if (ret)
- goto clk_free;
+ goto host_free;
host->plat = plat;
host->variant = variant;
goto clk_disable;
}
+ if (variant->busy_detect) {
+ mmci_ops.card_busy = mmci_card_busy;
+ mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);
+ }
+
mmc->ops = &mmci_ops;
/*
* The ARM and ST versions of the block have slightly different
iounmap(host->base);
clk_disable:
clk_disable_unprepare(host->clk);
- clk_free:
- clk_put(host->clk);
host_free:
mmc_free_host(mmc);
rel_regions:
iounmap(host->base);
clk_disable_unprepare(host->clk);
- clk_put(host->clk);
mmc_free_host(mmc);
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOIT (1 << 22)
#define MCI_ST_CEATAEND (1 << 23)
+#define MCI_ST_CARDBUSY (1 << 24)
#define MMCICLEAR 0x038
#define MCI_CMDCRCFAILCLR (1 << 0)
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOITC (1 << 22)
#define MCI_ST_CEATAENDC (1 << 23)
+#define MCI_ST_BUSYENDC (1 << 24)
#define MMCIMASK0 0x03c
#define MCI_CMDCRCFAILMASK (1 << 0)
unsigned int cclk;
u32 pwr_reg;
u32 clk_reg;
+ u32 datactrl_reg;
+ bool vqmmc_enabled;
struct mmci_platform_data *plat;
struct variant_data *variant;
projects / karo-tx-linux.git / commitdiff