device tree bindings for your controller.
GPIOs mappings are defined in the consumer device's node, in a property named
-<function>-gpios, where <function> is the function the driver will request
-through gpiod_get(). For example:
+either <function>-gpios or <function>-gpio, where <function> is the function
+the driver will request through gpiod_get(). For example:
foo_device {
compatible = "acme,foo";
<&gpio 16 GPIO_ACTIVE_HIGH>, /* green */
<&gpio 17 GPIO_ACTIVE_HIGH>; /* blue */
- power-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ power-gpio = <&gpio 1 GPIO_ACTIVE_LOW>;
};
This property will make GPIOs 15, 16 and 17 available to the driver under the
struct gpio_desc *red, *green, *blue, *power;
- red = gpiod_get_index(dev, "led", 0);
- green = gpiod_get_index(dev, "led", 1);
- blue = gpiod_get_index(dev, "led", 2);
+ red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+ green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+ blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
- power = gpiod_get(dev, "power");
+ power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
gpiod_is_active_low(power) will be true).
+The second parameter of the gpiod_get() functions, the con_id string, has to be
+the <function>-prefix of the GPIO suffixes ("gpios" or "gpio", automatically
+looked up by the gpiod functions internally) used in the device tree. With above
+"led-gpios" example, use the prefix without the "-" as con_id parameter: "led".
+
+Internally, the GPIO subsystem prefixes the GPIO suffix ("gpios" or "gpio")
+with the string passed in con_id to get the resulting string
+(snprintf(... "%s-%s", con_id, gpio_suffixes[]).
+
ACPI
----
ACPI also supports function names for GPIOs in a similar fashion to DT.
struct gpio_desc *red, *green, *blue, *power;
- red = gpiod_get_index(dev, "led", 0);
- green = gpiod_get_index(dev, "led", 1);
- blue = gpiod_get_index(dev, "led", 2);
+ red = gpiod_get_index(dev, "led", 0, GPIOD_OUT_HIGH);
+ green = gpiod_get_index(dev, "led", 1, GPIOD_OUT_HIGH);
+ blue = gpiod_get_index(dev, "led", 2, GPIOD_OUT_HIGH);
- power = gpiod_get(dev, "power");
- gpiod_direction_output(power, 1);
+ power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
-Since the "power" GPIO is mapped as active-low, its actual signal will be 0
-after this code. Contrary to the legacy integer GPIO interface, the active-low
-property is handled during mapping and is thus transparent to GPIO consumers.
+Since the "led" GPIOs are mapped as active-high, this example will switch their
+signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
+as active-low, its actual signal will be 0 after this code. Contrary to the legacy
+integer GPIO interface, the active-low property is handled during mapping and is
+thus transparent to GPIO consumers.
const char *con_id, unsigned int idx,
enum gpiod_flags flags)
+For a more detailed description of the con_id parameter in the DeviceTree case
+see Documentation/gpio/board.txt
+
The flags parameter is used to optionally specify a direction and initial value
for the GPIO. Values can be:
Prefix: 'nct6792'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
+ * Nuvoton NCT6793D
+ Prefix: 'nct6793'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
Authors:
Guenter Roeck <linux@roeck-us.net>
DEFINE_STATIC_KEY_TRUE(key);
DEFINE_STATIC_KEY_FALSE(key);
-static_key_likely()
-statick_key_unlikely()
+static_branch_likely()
+static_branch_unlikely()
0) Abstract
LD += -EL
endif
+#
+# The Scalar Replacement of Aggregates (SRA) optimization pass in GCC 4.9 and
+# later may result in code being generated that handles signed short and signed
+# char struct members incorrectly. So disable it.
+# (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932)
+#
+KBUILD_CFLAGS += $(call cc-option,-fno-ipa-sra)
+
# This selects which instruction set is used.
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
#endif
.endm
- .macro uaccess_save_and_disable, tmp
- uaccess_save \tmp
- uaccess_disable \tmp
- .endm
-
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro ret\c, reg
#if __LINUX_ARM_ARCH__ < 6
"2:\t.asciz " #__file "\n" \
".popsection\n" \
".pushsection __bug_table,\"a\"\n" \
+ ".align 2\n" \
"3:\t.word 1b, 2b\n" \
"\t.hword " #__line ", 0\n" \
".popsection"); \
#ifndef __ASSEMBLY__
#include <asm/barrier.h>
+#include <asm/thread_info.h>
#endif
/*
asm(
"mrc p15, 0, %0, c3, c0 @ get domain"
- : "=r" (domain));
+ : "=r" (domain)
+ : "m" (current_thread_info()->cpu_domain));
return domain;
}
{
asm volatile(
"mcr p15, 0, %0, c3, c0 @ set domain"
- : : "r" (val));
+ : : "r" (val) : "memory");
isb();
}
struct task_struct;
#include <asm/types.h>
-#include <asm/domain.h>
typedef unsigned long mm_segment_t;
memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
+#ifdef CONFIG_CPU_USE_DOMAINS
/*
* Copy the initial value of the domain access control register
* from the current thread: thread->addr_limit will have been
* kernel/fork.c
*/
thread->cpu_domain = get_domain();
+#endif
if (likely(!(p->flags & PF_KTHREAD))) {
*childregs = *current_pt_regs();
reteq r4 @ no, return failure
next:
+ uaccess_enable r3
.Lx1: ldrt r6, [r5], #4 @ get the next instruction and
@ increment PC
-
+ uaccess_disable r3
and r2, r6, #0x0F000000 @ test for FP insns
teq r2, #0x0C000000
teqne r2, #0x0D000000
mov r1, r2
mov r2, r3
ldr r3, [sp, #8]
+ /*
+ * Privcmd calls are issued by the userspace. We need to allow the
+ * kernel to access the userspace memory before issuing the hypercall.
+ */
+ uaccess_enable r4
+
+ /* r4 is loaded now as we use it as scratch register before */
ldr r4, [sp, #4]
__HVC(XEN_IMM)
+
+ /*
+ * Disable userspace access from kernel. This is fine to do it
+ * unconditionally as no set_fs(KERNEL_DS)/set_fs(get_ds()) is
+ * called before.
+ */
+ uaccess_disable r4
+
ldm sp!, {r4}
ret lr
ENDPROC(privcmd_call);
-#define NR_syscalls 319 /* length of syscall table */
+#define NR_syscalls 321 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
#define __NR_memfd_create 1340
#define __NR_bpf 1341
#define __NR_execveat 1342
+#define __NR_userfaultfd 1343
+#define __NR_membarrier 1344
#endif /* _UAPI_ASM_IA64_UNISTD_H */
data8 sys_memfd_create // 1340
data8 sys_bpf
data8 sys_execveat
+ data8 sys_userfaultfd
+ data8 sys_membarrier
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
depends on X86_MCE_INTEL
config X86_LEGACY_VM86
- bool "Legacy VM86 support (obsolete)"
+ bool "Legacy VM86 support"
default n
depends on X86_32
---help---
available to accelerate real mode DOS programs. However, any
recent version of DOSEMU, X, or vbetool should be fully
functional even without kernel VM86 support, as they will all
- fall back to (pretty well performing) software emulation.
+ fall back to software emulation. Nevertheless, if you are using
+ a 16-bit DOS program where 16-bit performance matters, vm86
+ mode might be faster than emulation and you might want to
+ enable this option.
- Anything that works on a 64-bit kernel is unlikely to need
- this option, as 64-bit kernels don't, and can't, support V8086
- mode. This option is also unrelated to 16-bit protected mode
- and is not needed to run most 16-bit programs under Wine.
+ Note that any app that works on a 64-bit kernel is unlikely to
+ need this option, as 64-bit kernels don't, and can't, support
+ V8086 mode. This option is also unrelated to 16-bit protected
+ mode and is not needed to run most 16-bit programs under Wine.
- Enabling this option adds considerable attack surface to the
- kernel and slows down system calls and exception handling.
+ Enabling this option increases the complexity of the kernel
+ and slows down exception handling a tiny bit.
- Unless you use very old userspace or need the last drop of
- performance in your real mode DOS games and can't use KVM,
- say N here.
+ If unsure, say N here.
config VM86
bool
#define X86_FEATURE_AVX512PF ( 9*32+26) /* AVX-512 Prefetch */
#define X86_FEATURE_AVX512ER ( 9*32+27) /* AVX-512 Exponential and Reciprocal */
#define X86_FEATURE_AVX512CD ( 9*32+28) /* AVX-512 Conflict Detection */
+#define X86_FEATURE_SHA_NI ( 9*32+29) /* SHA1/SHA256 Instruction Extensions */
/* Extended state features, CPUID level 0x0000000d:1 (eax), word 10 */
#define X86_FEATURE_XSAVEOPT (10*32+ 0) /* XSAVEOPT */
struct pv_time_ops {
unsigned long long (*sched_clock)(void);
unsigned long long (*steal_clock)(int cpu);
- unsigned long (*get_tsc_khz)(void);
};
struct pv_cpu_ops {
}
#endif
-#define virt_queued_spin_lock virt_queued_spin_lock
-
-static inline bool virt_queued_spin_lock(struct qspinlock *lock)
+#ifdef CONFIG_PARAVIRT
+#define virt_spin_lock virt_spin_lock
+static inline bool virt_spin_lock(struct qspinlock *lock)
{
if (!static_cpu_has(X86_FEATURE_HYPERVISOR))
return false;
- while (atomic_cmpxchg(&lock->val, 0, _Q_LOCKED_VAL) != 0)
- cpu_relax();
+ /*
+ * On hypervisors without PARAVIRT_SPINLOCKS support we fall
+ * back to a Test-and-Set spinlock, because fair locks have
+ * horrible lock 'holder' preemption issues.
+ */
+
+ do {
+ while (atomic_read(&lock->val) != 0)
+ cpu_relax();
+ } while (atomic_cmpxchg(&lock->val, 0, _Q_LOCKED_VAL) != 0);
return true;
}
+#endif /* CONFIG_PARAVIRT */
#include <asm-generic/qspinlock.h>
static void __init_or_module optimize_nops(struct alt_instr *a, u8 *instr)
{
+ unsigned long flags;
+
if (instr[0] != 0x90)
return;
+ local_irq_save(flags);
add_nops(instr + (a->instrlen - a->padlen), a->padlen);
+ sync_core();
+ local_irq_restore(flags);
DUMP_BYTES(instr, a->instrlen, "%p: [%d:%d) optimized NOPs: ",
instr, a->instrlen - a->padlen, a->padlen);
apic_write(APIC_LVTT, lvtt_value);
if (lvtt_value & APIC_LVT_TIMER_TSCDEADLINE) {
+ /*
+ * See Intel SDM: TSC-Deadline Mode chapter. In xAPIC mode,
+ * writing to the APIC LVTT and TSC_DEADLINE MSR isn't serialized.
+ * According to Intel, MFENCE can do the serialization here.
+ */
+ asm volatile("mfence" : : : "memory");
+
printk_once(KERN_DEBUG "TSC deadline timer enabled\n");
return;
}
int pin, ioapic, irq, irq_entry;
const struct cpumask *mask;
struct irq_data *idata;
+ struct irq_chip *chip;
if (skip_ioapic_setup == 1)
return;
else
mask = apic->target_cpus();
- irq_set_affinity(irq, mask);
+ chip = irq_data_get_irq_chip(idata);
+ chip->irq_set_affinity(idata, mask, false);
}
-
}
#endif
else
printk(KERN_CONT "%d86", c->x86);
- printk(KERN_CONT " (fam: %02x, model: %02x", c->x86, c->x86_model);
+ printk(KERN_CONT " (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
if (c->x86_mask || c->cpuid_level >= 0)
- printk(KERN_CONT ", stepping: %02x)\n", c->x86_mask);
+ printk(KERN_CONT ", stepping: 0x%x)\n", c->x86_mask);
else
printk(KERN_CONT ")\n");
intel_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
struct perf_event *event)
{
- struct event_constraint *c1 = cpuc->event_constraint[idx];
+ struct event_constraint *c1 = NULL;
struct event_constraint *c2;
+ if (idx >= 0) /* fake does < 0 */
+ c1 = cpuc->event_constraint[idx];
+
/*
* first time only
* - static constraint: no change across incremental scheduling calls
if (!buf || bts_buffer_is_full(buf, bts))
return;
+ event->hw.itrace_started = 1;
event->hw.state = 0;
if (!buf->snapshot)
if (alloc_size > PAGE_SIZE)
new_ldt->entries = vzalloc(alloc_size);
else
- new_ldt->entries = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ new_ldt->entries = (void *)get_zeroed_page(GFP_KERNEL);
if (!new_ldt->entries) {
kfree(new_ldt);
if (ldt->size * LDT_ENTRY_SIZE > PAGE_SIZE)
vfree(ldt->entries);
else
- kfree(ldt->entries);
+ free_page((unsigned long)ldt->entries);
kfree(ldt);
}
#include <asm/hypervisor.h>
#include <asm/nmi.h>
#include <asm/x86_init.h>
+#include <asm/geode.h>
unsigned int __read_mostly cpu_khz; /* TSC clocks / usec, not used here */
EXPORT_SYMBOL(cpu_khz);
static void __init check_system_tsc_reliable(void)
{
-#ifdef CONFIG_MGEODE_LX
- /* RTSC counts during suspend */
+#if defined(CONFIG_MGEODEGX1) || defined(CONFIG_MGEODE_LX) || defined(CONFIG_X86_GENERIC)
+ if (is_geode_lx()) {
+ /* RTSC counts during suspend */
#define RTSC_SUSP 0x100
- unsigned long res_low, res_high;
+ unsigned long res_low, res_high;
- rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
- /* Geode_LX - the OLPC CPU has a very reliable TSC */
- if (res_low & RTSC_SUSP)
- tsc_clocksource_reliable = 1;
+ rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
+ /* Geode_LX - the OLPC CPU has a very reliable TSC */
+ if (res_low & RTSC_SUSP)
+ tsc_clocksource_reliable = 1;
+ }
#endif
if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
tsc_clocksource_reliable = 1;
#include <linux/audit.h>
#include <linux/stddef.h>
#include <linux/slab.h>
+#include <linux/security.h>
#include <asm/uaccess.h>
#include <asm/io.h>
struct pt_regs *regs = current_pt_regs();
unsigned long err = 0;
+ err = security_mmap_addr(0);
+ if (err) {
+ /*
+ * vm86 cannot virtualize the address space, so vm86 users
+ * need to manage the low 1MB themselves using mmap. Given
+ * that BIOS places important data in the first page, vm86
+ * is essentially useless if mmap_min_addr != 0. DOSEMU,
+ * for example, won't even bother trying to use vm86 if it
+ * can't map a page at virtual address 0.
+ *
+ * To reduce the available kernel attack surface, simply
+ * disallow vm86(old) for users who cannot mmap at va 0.
+ *
+ * The implementation of security_mmap_addr will allow
+ * suitably privileged users to map va 0 even if
+ * vm.mmap_min_addr is set above 0, and we want this
+ * behavior for vm86 as well, as it ensures that legacy
+ * tools like vbetool will not fail just because of
+ * vm.mmap_min_addr.
+ */
+ pr_info_once("Denied a call to vm86(old) from %s[%d] (uid: %d). Set the vm.mmap_min_addr sysctl to 0 and/or adjust LSM mmap_min_addr policy to enable vm86 if you are using a vm86-based DOS emulator.\n",
+ current->comm, task_pid_nr(current),
+ from_kuid_munged(&init_user_ns, current_uid()));
+ return -EPERM;
+ }
+
if (!vm86) {
if (!(vm86 = kzalloc(sizeof(*vm86), GFP_KERNEL)))
return -ENOMEM;
node_set(node, numa_nodes_parsed);
- pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s\n",
+ pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s%s\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1,
- hotpluggable ? " hotplug" : "");
+ hotpluggable ? " hotplug" : "",
+ ma->flags & ACPI_SRAT_MEM_NON_VOLATILE ? " non-volatile" : "");
/* Mark hotplug range in memblock. */
if (hotpluggable && memblock_mark_hotplug(start, ma->length))
char *xbuf[XBUFSIZE];
char *xoutbuf[XBUFSIZE];
int ret = -ENOMEM;
+ unsigned int ivsize = crypto_skcipher_ivsize(tfm);
if (testmgr_alloc_buf(xbuf))
goto out_nobuf;
continue;
if (template[i].iv)
- memcpy(iv, template[i].iv, MAX_IVLEN);
+ memcpy(iv, template[i].iv, ivsize);
else
memset(iv, 0, MAX_IVLEN);
continue;
if (template[i].iv)
- memcpy(iv, template[i].iv, MAX_IVLEN);
+ memcpy(iv, template[i].iv, ivsize);
else
memset(iv, 0, MAX_IVLEN);
#include <linux/err.h>
#include <linux/device.h>
#include <linux/of_address.h>
+#include <linux/slab.h>
static DEFINE_SPINLOCK(clklock);
config COMMON_CLK_HI6220
bool "Hi6220 Clock Driver"
- depends on (ARCH_HISI || COMPILE_TEST) && MAILBOX
+ depends on ARCH_HISI || COMPILE_TEST
default ARCH_HISI
help
Build the Hisilicon Hi6220 clock driver based on the common clock framework.
+
+config STUB_CLK_HI6220
+ bool "Hi6220 Stub Clock Driver"
+ depends on COMMON_CLK_HI6220 && MAILBOX
+ help
+ Build the Hisilicon Hi6220 stub clock driver.
obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
-obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o clk-hi6220-stub.o
+obj-$(CONFIG_COMMON_CLK_HI6220) += clk-hi6220.o
+obj-$(CONFIG_STUB_CLK_HI6220) += clk-hi6220-stub.o
"aclk_cpu",
"aclk_peri",
"hclk_peri",
+ "pclk_cpu",
+ "pclk_peri",
};
static void __init rk3188_common_clk_init(struct device_node *np)
rockchip_clk_register_branches(common_clk_branches,
ARRAY_SIZE(common_clk_branches));
- rockchip_clk_protect_critical(rk3188_critical_clocks,
- ARRAY_SIZE(rk3188_critical_clocks));
rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
ROCKCHIP_SOFTRST_HIWORD_MASK);
mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
&rk3066_cpuclk_data, rk3066_cpuclk_rates,
ARRAY_SIZE(rk3066_cpuclk_rates));
+ rockchip_clk_protect_critical(rk3188_critical_clocks,
+ ARRAY_SIZE(rk3188_critical_clocks));
}
CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init);
pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n",
__func__);
}
+
+ rockchip_clk_protect_critical(rk3188_critical_clocks,
+ ARRAY_SIZE(rk3188_critical_clocks));
}
CLK_OF_DECLARE(rk3188a_cru, "rockchip,rk3188a-cru", rk3188a_clk_init);
config CRYPTO_DEV_VMX
bool "Support for VMX cryptographic acceleration instructions"
- depends on PPC64
+ depends on PPC64 && VSX
help
Support for VMX cryptographic acceleration instructions.
sg_miter_next(&mo);
oo = 0;
}
- } while (mo.length > 0);
+ } while (oleft > 0);
if (areq->info) {
for (i = 0; i < 4 && i < ivsize / 4; i++) {
config GPIO_RCAR
tristate "Renesas R-Car GPIO"
- depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
+ depends on ARCH_SHMOBILE || COMPILE_TEST
select GPIOLIB_IRQCHIP
help
Say yes here to support GPIO on Renesas R-Car SoCs.
return 0;
}
-static void mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
+static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base,
port->base, handle_level_irq);
+ if (!gc)
+ return -ENOMEM;
gc->private = port;
ct = gc->chip_types;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
IRQ_NOREQUEST, 0);
+
+ return 0;
}
static void mxc_gpio_get_hw(struct platform_device *pdev)
}
/* gpio-mxc can be a generic irq chip */
- mxc_gpio_init_gc(port, irq_base);
+ err = mxc_gpio_init_gc(port, irq_base);
+ if (err < 0)
+ goto out_irqdomain_remove;
list_add_tail(&port->node, &mxc_gpio_ports);
return 0;
+out_irqdomain_remove:
+ irq_domain_remove(port->domain);
out_irqdesc_free:
irq_free_descs(irq_base, 32);
out_gpiochip_remove:
return 0;
}
-static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
+static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base,
port->base, handle_level_irq);
+ if (!gc)
+ return -ENOMEM;
+
gc->private = port;
ct = gc->chip_types;
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
IRQ_NOREQUEST, 0);
+
+ return 0;
}
static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
}
/* gpio-mxs can be a generic irq chip */
- mxs_gpio_init_gc(port, irq_base);
+ err = mxs_gpio_init_gc(port, irq_base);
+ if (err < 0)
+ goto out_irqdomain_remove;
/* setup one handler for each entry */
irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
out_bgpio_remove:
bgpio_remove(&port->bgc);
+out_irqdomain_remove:
+ irq_domain_remove(port->domain);
out_irqdesc_free:
irq_free_descs(irq_base, 32);
return err;
} else {
bank->chip.label = "gpio";
bank->chip.base = gpio;
- gpio += bank->width;
}
bank->chip.ngpio = bank->width;
return ret;
}
+ if (!bank->is_mpuio)
+ gpio += bank->width;
+
#ifdef CONFIG_ARCH_OMAP1
/*
* REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
omap_gpio_mod_init(bank);
ret = omap_gpio_chip_init(bank, irqc);
- if (ret)
+ if (ret) {
+ pm_runtime_put_sync(bank->dev);
+ pm_runtime_disable(bank->dev);
return ret;
+ }
omap_gpio_show_rev(bank);
MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("i2c:sx150x");
* that the GPIO was actually requested.
*/
-static bool _gpiod_get_raw_value(const struct gpio_desc *desc)
+static int _gpiod_get_raw_value(const struct gpio_desc *desc)
{
struct gpio_chip *chip;
- bool value;
int offset;
+ int value;
chip = desc->chip;
offset = gpio_chip_hwgpio(desc);
- value = chip->get ? chip->get(chip, offset) : false;
+ value = chip->get ? chip->get(chip, offset) : -EIO;
+ value = value < 0 ? value : !!value;
trace_gpio_value(desc_to_gpio(desc), 1, value);
return value;
}
* @desc: gpio whose value will be returned
*
* Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
*
* This function should be called from contexts where we cannot sleep, and will
* complain if the GPIO chip functions potentially sleep.
* @desc: gpio whose value will be returned
*
* Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
*
* This function should be called from contexts where we cannot sleep, and will
* complain if the GPIO chip functions potentially sleep.
WARN_ON(desc->chip->can_sleep);
value = _gpiod_get_raw_value(desc);
+ if (value < 0)
+ return value;
+
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
value = !value;
* @desc: gpio whose value will be returned
*
* Return the GPIO's raw value, i.e. the value of the physical line disregarding
- * its ACTIVE_LOW status.
+ * its ACTIVE_LOW status, or negative errno on failure.
*
* This function is to be called from contexts that can sleep.
*/
* @desc: gpio whose value will be returned
*
* Return the GPIO's logical value, i.e. taking the ACTIVE_LOW status into
- * account.
+ * account, or negative errno on failure.
*
* This function is to be called from contexts that can sleep.
*/
return 0;
value = _gpiod_get_raw_value(desc);
+ if (value < 0)
+ return value;
+
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
value = !value;
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
- NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
- replaces the w83627ehf driver for NCT6775F and NCT6776F.
+ NCT6791D, NCT6792D, NCT6793D, and compatible Super-I/O chips. This
+ driver replaces the w83627ehf driver for NCT6775F and NCT6776F.
This driver can also be built as a module. If so, the module
will be called nct6775.
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
* nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3
* nct6792d 15 6 6 2+6 0xc910 0xc1 0x5ca3
+ * nct6793d 15 6 6 2+6 0xd120 0xc1 0x5ca3
*
* #temp lists the number of monitored temperature sources (first value) plus
* the number of directly connectable temperature sensors (second value).
#define USE_ALTERNATE
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792 };
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
"nct6779",
"nct6791",
"nct6792",
+ "nct6793",
+};
+
+static const char * const nct6775_sio_names[] __initconst = {
+ "NCT6106D",
+ "NCT6775F",
+ "NCT6776D/F",
+ "NCT6779D",
+ "NCT6791D",
+ "NCT6792D",
+ "NCT6793D",
};
static unsigned short force_id;
#define SIO_NCT6779_ID 0xc560
#define SIO_NCT6791_ID 0xc800
#define SIO_NCT6792_ID 0xc910
+#define SIO_NCT6793_ID 0xd120
#define SIO_ID_MASK 0xFFF0
enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
/* NCT6776 specific data */
+/* STEP_UP_TIME and STEP_DOWN_TIME regs are swapped for all chips but NCT6775 */
+#define NCT6776_REG_FAN_STEP_UP_TIME NCT6775_REG_FAN_STEP_DOWN_TIME
+#define NCT6776_REG_FAN_STEP_DOWN_TIME NCT6775_REG_FAN_STEP_UP_TIME
+
static const s8 NCT6776_ALARM_BITS[] = {
0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */
17, -1, -1, -1, -1, -1, -1, /* in8..in14 */
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, 9 }; /* intrusion0, intrusion1 */
-/* NCT6792 specific data */
+/* NCT6792/NCT6793 specific data */
static const u16 NCT6792_REG_TEMP_MON[] = {
0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d };
case nct6779:
case nct6791:
case nct6792:
+ case nct6793:
return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
reg == 0x402 ||
case nct6779:
case nct6791:
case nct6792:
+ case nct6793:
reg = nct6775_read_value(data,
data->REG_CRITICAL_PWM_ENABLE[i]);
if (reg & data->CRITICAL_PWM_ENABLE_MASK)
case nct6779:
case nct6791:
case nct6792:
+ case nct6793:
nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
val);
reg = nct6775_read_value(data,
pwm4pin = false;
pwm5pin = false;
pwm6pin = false;
- } else { /* NCT6779D, NCT6791D, or NCT6792D */
+ } else { /* NCT6779D, NCT6791D, NCT6792D, or NCT6793D */
regval = superio_inb(sioreg, 0x1c);
fan3pin = !(regval & (1 << 5));
fan4min = fan4pin;
- if (data->kind == nct6791 || data->kind == nct6792) {
+ if (data->kind == nct6791 || data->kind == nct6792 ||
+ data->kind == nct6793) {
regval = superio_inb(sioreg, 0x2d);
fan6pin = (regval & (1 << 1));
pwm6pin = (regval & (1 << 0));
data->REG_FAN_PULSES = NCT6776_REG_FAN_PULSES;
data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
- data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
- data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+ data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
data->REG_PWM[0] = NCT6775_REG_PWM;
data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
- data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
- data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+ data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
data->REG_PWM[0] = NCT6775_REG_PWM;
data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
break;
case nct6791:
case nct6792:
+ case nct6793:
data->in_num = 15;
data->pwm_num = 6;
data->auto_pwm_num = 4;
data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES;
data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT;
data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME;
- data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME;
- data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME;
+ data->REG_FAN_TIME[1] = NCT6776_REG_FAN_STEP_UP_TIME;
+ data->REG_FAN_TIME[2] = NCT6776_REG_FAN_STEP_DOWN_TIME;
data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H;
data->REG_PWM[0] = NCT6775_REG_PWM;
data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT;
case nct6779:
case nct6791:
case nct6792:
+ case nct6793:
break;
}
break;
case nct6791:
case nct6792:
+ case nct6793:
tmp |= 0x7e;
break;
}
if (reg != data->sio_reg_enable)
superio_outb(sioreg, SIO_REG_ENABLE, data->sio_reg_enable);
- if (data->kind == nct6791 || data->kind == nct6792)
+ if (data->kind == nct6791 || data->kind == nct6792 ||
+ data->kind == nct6793)
nct6791_enable_io_mapping(sioreg);
superio_exit(sioreg);
.probe = nct6775_probe,
};
-static const char * const nct6775_sio_names[] __initconst = {
- "NCT6106D",
- "NCT6775F",
- "NCT6776D/F",
- "NCT6779D",
- "NCT6791D",
- "NCT6792D",
-};
-
/* nct6775_find() looks for a '627 in the Super-I/O config space */
static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
{
case SIO_NCT6792_ID:
sio_data->kind = nct6792;
break;
+ case SIO_NCT6793_ID:
+ sio_data->kind = nct6793;
+ break;
default:
if (val != 0xffff)
pr_debug("unsupported chip ID: 0x%04x\n", val);
superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
}
- if (sio_data->kind == nct6791 || sio_data->kind == nct6792)
+ if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
+ sio_data->kind == nct6793)
nct6791_enable_io_mapping(sioaddr);
superio_exit(sioaddr);
}
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D/NCT6792D driver");
+MODULE_DESCRIPTION("Driver for NCT6775F and compatible chips");
MODULE_LICENSE("GPL");
module_init(sensors_nct6775_init);
source "drivers/infiniband/hw/mthca/Kconfig"
source "drivers/infiniband/hw/qib/Kconfig"
-source "drivers/infiniband/hw/ehca/Kconfig"
source "drivers/infiniband/hw/cxgb3/Kconfig"
source "drivers/infiniband/hw/cxgb4/Kconfig"
source "drivers/infiniband/hw/mlx4/Kconfig"
obj-$(CONFIG_INFINIBAND_MTHCA) += mthca/
obj-$(CONFIG_INFINIBAND_QIB) += qib/
-obj-$(CONFIG_INFINIBAND_EHCA) += ehca/
obj-$(CONFIG_INFINIBAND_CXGB3) += cxgb3/
obj-$(CONFIG_INFINIBAND_CXGB4) += cxgb4/
obj-$(CONFIG_MLX4_INFINIBAND) += mlx4/
struct pinctrl_gpio_range *range = NULL;
struct gpio_chip *chip = gpio_to_chip(gpio);
+ if (WARN(!chip, "no gpio_chip for gpio%i?", gpio))
+ return false;
+
mutex_lock(&pinctrldev_list_mutex);
/* Loop over the pin controllers */
pmap->dev = &pdev->dev;
pmap->pctl = pinctrl_register(pctl_desc, &pdev->dev, pmap);
- if (!pmap->pctl) {
+ if (IS_ERR(pmap->pctl)) {
dev_err(&pdev->dev, "pinctrl driver registration failed\n");
- return -EINVAL;
+ return PTR_ERR(pmap->pctl);
}
ret = dc_gpiochip_add(pmap, pdev->dev.of_node);
/* See if this pctldev has this function */
while (selector < nfuncs) {
- const char *fname = ops->get_function_name(pctldev,
- selector);
+ const char *fname = ops->get_function_name(pctldev, selector);
if (!strcmp(function, fname))
return selector;
#endif
pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl);
- if (!pctrl->pctrl) {
+ if (IS_ERR(pctrl->pctrl)) {
dev_err(&pdev->dev, "couldn't register pm8xxx gpio driver\n");
- return -ENODEV;
+ return PTR_ERR(pctrl->pctrl);
}
pctrl->chip = pm8xxx_gpio_template;
#endif
pctrl->pctrl = pinctrl_register(&pctrl->desc, &pdev->dev, pctrl);
- if (!pctrl->pctrl) {
+ if (IS_ERR(pctrl->pctrl)) {
dev_err(&pdev->dev, "couldn't register pm8xxx mpp driver\n");
- return -ENODEV;
+ return PTR_ERR(pctrl->pctrl);
}
pctrl->chip = pm8xxx_mpp_template;
u32 offset, u32 range)
{
struct s3c24xx_eint_data *data = irq_desc_get_handler_data(desc);
- struct irq_chip *chip = irq_desc_get_irq_chip(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
struct samsung_pinctrl_drv_data *d = data->drvdata;
unsigned int pend, mask;
source "drivers/staging/rdma/amso1100/Kconfig"
+source "drivers/staging/rdma/ehca/Kconfig"
+
source "drivers/staging/rdma/hfi1/Kconfig"
source "drivers/staging/rdma/ipath/Kconfig"
# Entries for RDMA_STAGING tree
obj-$(CONFIG_INFINIBAND_AMSO1100) += amso1100/
+obj-$(CONFIG_INFINIBAND_EHCA) += ehca/
obj-$(CONFIG_INFINIBAND_HFI1) += hfi1/
obj-$(CONFIG_INFINIBAND_IPATH) += ipath/
tristate "eHCA support"
depends on IBMEBUS
---help---
- This driver supports the IBM pSeries eHCA InfiniBand adapter.
+ This driver supports the deprecated IBM pSeries eHCA InfiniBand
+ adapter.
To compile the driver as a module, choose M here. The module
will be called ib_ehca.
--- /dev/null
+9/2015
+
+The ehca driver has been deprecated and moved to drivers/staging/rdma.
+It will be removed in the 4.6 merge window.
static void
cifs_show_security(struct seq_file *s, struct cifs_ses *ses)
{
- if (ses->sectype == Unspecified)
+ if (ses->sectype == Unspecified) {
+ if (ses->user_name == NULL)
+ seq_puts(s, ",sec=none");
return;
+ }
seq_puts(s, ",sec=");
goto out_drop_write;
}
+ if (src_file.file->f_op->unlocked_ioctl != cifs_ioctl) {
+ rc = -EBADF;
+ cifs_dbg(VFS, "src file seems to be from a different filesystem type\n");
+ goto out_fput;
+ }
+
if ((!src_file.file->private_data) || (!dst_file->private_data)) {
rc = -EBADF;
cifs_dbg(VFS, "missing cifsFileInfo on copy range src file\n");
cpu_relax();
}
-#ifndef virt_queued_spin_lock
-static __always_inline bool virt_queued_spin_lock(struct qspinlock *lock)
+#ifndef virt_spin_lock
+static __always_inline bool virt_spin_lock(struct qspinlock *lock)
{
return false;
}
struct clock_event_device;
struct module;
-/* Clock event mode commands for legacy ->set_mode(): OBSOLETE */
-enum clock_event_mode {
- CLOCK_EVT_MODE_UNUSED,
- CLOCK_EVT_MODE_SHUTDOWN,
- CLOCK_EVT_MODE_PERIODIC,
- CLOCK_EVT_MODE_ONESHOT,
- CLOCK_EVT_MODE_RESUME,
-};
-
/*
* Possible states of a clock event device.
*
* @min_delta_ns: minimum delta value in ns
* @mult: nanosecond to cycles multiplier
* @shift: nanoseconds to cycles divisor (power of two)
- * @mode: operating mode, relevant only to ->set_mode(), OBSOLETE
* @state_use_accessors:current state of the device, assigned by the core code
* @features: features
* @retries: number of forced programming retries
- * @set_mode: legacy set mode function, only for modes <= CLOCK_EVT_MODE_RESUME.
- * @set_state_periodic: switch state to periodic, if !set_mode
- * @set_state_oneshot: switch state to oneshot, if !set_mode
- * @set_state_oneshot_stopped: switch state to oneshot_stopped, if !set_mode
- * @set_state_shutdown: switch state to shutdown, if !set_mode
- * @tick_resume: resume clkevt device, if !set_mode
+ * @set_state_periodic: switch state to periodic
+ * @set_state_oneshot: switch state to oneshot
+ * @set_state_oneshot_stopped: switch state to oneshot_stopped
+ * @set_state_shutdown: switch state to shutdown
+ * @tick_resume: resume clkevt device
* @broadcast: function to broadcast events
* @min_delta_ticks: minimum delta value in ticks stored for reconfiguration
* @max_delta_ticks: maximum delta value in ticks stored for reconfiguration
u64 min_delta_ns;
u32 mult;
u32 shift;
- enum clock_event_mode mode;
enum clock_event_state state_use_accessors;
unsigned int features;
unsigned long retries;
- /*
- * State transition callback(s): Only one of the two groups should be
- * defined:
- * - set_mode(), only for modes <= CLOCK_EVT_MODE_RESUME.
- * - set_state_{shutdown|periodic|oneshot|oneshot_stopped}(), tick_resume().
- */
- void (*set_mode)(enum clock_event_mode mode, struct clock_event_device *);
int (*set_state_periodic)(struct clock_event_device *);
int (*set_state_oneshot)(struct clock_event_device *);
int (*set_state_oneshot_stopped)(struct clock_event_device *);
*
* DEFINE_STATIC_KEY_TRUE(key);
* DEFINE_STATIC_KEY_FALSE(key);
- * static_key_likely()
- * statick_key_unlikely()
+ * static_branch_likely()
+ * static_branch_unlikely()
*
* Jump labels provide an interface to generate dynamic branches using
* self-modifying code. Assuming toolchain and architecture support, if we
* statement, setting the key to true requires us to patch in a jump
* to the out-of-line of true branch.
*
- * In addtion to static_branch_{enable,disable}, we can also reference count
+ * In addition to static_branch_{enable,disable}, we can also reference count
* the key or branch direction via static_branch_{inc,dec}. Thus,
* static_branch_inc() can be thought of as a 'make more true' and
- * static_branch_dec() as a 'make more false'. The inc()/dec()
- * interface is meant to be used exclusively from the inc()/dec() for a given
- * key.
+ * static_branch_dec() as a 'make more false'.
*
* Since this relies on modifying code, the branch modifying functions
* must be considered absolute slow paths (machine wide synchronization etc.).
cpumask_or(mask, mask, tick_nohz_full_mask);
}
+static inline int housekeeping_any_cpu(void)
+{
+ return cpumask_any_and(housekeeping_mask, cpu_online_mask);
+}
+
extern void tick_nohz_full_kick(void);
extern void tick_nohz_full_kick_cpu(int cpu);
extern void tick_nohz_full_kick_all(void);
extern void __tick_nohz_task_switch(void);
#else
+static inline int housekeeping_any_cpu(void)
+{
+ return smp_processor_id();
+}
static inline bool tick_nohz_full_enabled(void) { return false; }
static inline bool tick_nohz_full_cpu(int cpu) { return false; }
static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask) { }
if (pv_enabled())
goto queue;
- if (virt_queued_spin_lock(lock))
+ if (virt_spin_lock(lock))
return;
/*
int i, cpu = smp_processor_id();
struct sched_domain *sd;
- if (!idle_cpu(cpu))
+ if (!idle_cpu(cpu) && is_housekeeping_cpu(cpu))
return cpu;
rcu_read_lock();
for_each_domain(cpu, sd) {
for_each_cpu(i, sched_domain_span(sd)) {
- if (!idle_cpu(i)) {
+ if (!idle_cpu(i) && is_housekeeping_cpu(cpu)) {
cpu = i;
goto unlock;
}
}
}
+
+ if (!is_housekeeping_cpu(cpu))
+ cpu = housekeeping_any_cpu();
unlock:
rcu_read_unlock();
return cpu;
break;
/*
- * Ensure rq->lock covers the entire task selection
- * until the migration.
+ * pick_next_task assumes pinned rq->lock.
*/
lockdep_pin_lock(&rq->lock);
next = pick_next_task(rq, &fake_task);
BUG_ON(!next);
next->sched_class->put_prev_task(rq, next);
+ /*
+ * Rules for changing task_struct::cpus_allowed are holding
+ * both pi_lock and rq->lock, such that holding either
+ * stabilizes the mask.
+ *
+ * Drop rq->lock is not quite as disastrous as it usually is
+ * because !cpu_active at this point, which means load-balance
+ * will not interfere. Also, stop-machine.
+ */
+ lockdep_unpin_lock(&rq->lock);
+ raw_spin_unlock(&rq->lock);
+ raw_spin_lock(&next->pi_lock);
+ raw_spin_lock(&rq->lock);
+
+ /*
+ * Since we're inside stop-machine, _nothing_ should have
+ * changed the task, WARN if weird stuff happened, because in
+ * that case the above rq->lock drop is a fail too.
+ */
+ if (WARN_ON(task_rq(next) != rq || !task_on_rq_queued(next))) {
+ raw_spin_unlock(&next->pi_lock);
+ continue;
+ }
+
/* Find suitable destination for @next, with force if needed. */
dest_cpu = select_fallback_rq(dead_rq->cpu, next);
- lockdep_unpin_lock(&rq->lock);
rq = __migrate_task(rq, next, dest_cpu);
if (rq != dead_rq) {
raw_spin_unlock(&rq->lock);
rq = dead_rq;
raw_spin_lock(&rq->lock);
}
+ raw_spin_unlock(&next->pi_lock);
}
rq->stop = stop;
static int __clockevents_switch_state(struct clock_event_device *dev,
enum clock_event_state state)
{
- /* Transition with legacy set_mode() callback */
- if (dev->set_mode) {
- /* Legacy callback doesn't support new modes */
- if (state > CLOCK_EVT_STATE_ONESHOT)
- return -ENOSYS;
- /*
- * 'clock_event_state' and 'clock_event_mode' have 1-to-1
- * mapping until *_ONESHOT, and so a simple cast will work.
- */
- dev->set_mode((enum clock_event_mode)state, dev);
- dev->mode = (enum clock_event_mode)state;
- return 0;
- }
-
if (dev->features & CLOCK_EVT_FEAT_DUMMY)
return 0;
{
int ret = 0;
- if (dev->set_mode) {
- dev->set_mode(CLOCK_EVT_MODE_RESUME, dev);
- dev->mode = CLOCK_EVT_MODE_RESUME;
- } else if (dev->tick_resume) {
+ if (dev->tick_resume)
ret = dev->tick_resume(dev);
- }
return ret;
}
}
EXPORT_SYMBOL_GPL(clockevents_unbind_device);
-/* Sanity check of state transition callbacks */
-static int clockevents_sanity_check(struct clock_event_device *dev)
-{
- /* Legacy set_mode() callback */
- if (dev->set_mode) {
- /* We shouldn't be supporting new modes now */
- WARN_ON(dev->set_state_periodic || dev->set_state_oneshot ||
- dev->set_state_shutdown || dev->tick_resume ||
- dev->set_state_oneshot_stopped);
-
- BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
- return 0;
- }
-
- if (dev->features & CLOCK_EVT_FEAT_DUMMY)
- return 0;
-
- return 0;
-}
-
/**
* clockevents_register_device - register a clock event device
* @dev: device to register
{
unsigned long flags;
- BUG_ON(clockevents_sanity_check(dev));
-
/* Initialize state to DETACHED */
clockevent_set_state(dev, CLOCK_EVT_STATE_DETACHED);
* the set mode function!
*/
clockevent_set_state(dev, CLOCK_EVT_STATE_DETACHED);
- dev->mode = CLOCK_EVT_MODE_UNUSED;
clockevents_exchange_device(dev, NULL);
dev->event_handler = clockevents_handle_noop;
td->evtdev = NULL;
__setup("nohz_full=", tick_nohz_full_setup);
static int tick_nohz_cpu_down_callback(struct notifier_block *nfb,
- unsigned long action,
- void *hcpu)
+ unsigned long action,
+ void *hcpu)
{
unsigned int cpu = (unsigned long)hcpu;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DOWN_PREPARE:
/*
- * If we handle the timekeeping duty for full dynticks CPUs,
- * we can't safely shutdown that CPU.
+ * The boot CPU handles housekeeping duty (unbound timers,
+ * workqueues, timekeeping, ...) on behalf of full dynticks
+ * CPUs. It must remain online when nohz full is enabled.
*/
if (tick_nohz_full_running && tick_do_timer_cpu == cpu)
return NOTIFY_BAD;
cpu_notifier(tick_nohz_cpu_down_callback, 0);
pr_info("NO_HZ: Full dynticks CPUs: %*pbl.\n",
cpumask_pr_args(tick_nohz_full_mask));
+
+ /*
+ * We need at least one CPU to handle housekeeping work such
+ * as timekeeping, unbound timers, workqueues, ...
+ */
+ WARN_ON_ONCE(cpumask_empty(housekeeping_mask));
}
#endif
negative = (tick_error < 0);
/* Sort out the magnitude of the correction */
- tick_error = abs(tick_error);
+ tick_error = abs64(tick_error);
for (adj = 0; tick_error > interval; adj++)
tick_error >>= 1;
(unsigned long long) dev->min_delta_ns);
SEQ_printf(m, " mult: %u\n", dev->mult);
SEQ_printf(m, " shift: %u\n", dev->shift);
- SEQ_printf(m, " mode: %d\n", dev->mode);
+ SEQ_printf(m, " mode: %d\n", clockevent_get_state(dev));
SEQ_printf(m, " next_event: %Ld nsecs\n",
(unsigned long long) ktime_to_ns(dev->next_event));
print_name_offset(m, dev->set_next_event);
SEQ_printf(m, "\n");
- if (dev->set_mode) {
- SEQ_printf(m, " set_mode: ");
- print_name_offset(m, dev->set_mode);
+ if (dev->set_state_shutdown) {
+ SEQ_printf(m, " shutdown: ");
+ print_name_offset(m, dev->set_state_shutdown);
SEQ_printf(m, "\n");
- } else {
- if (dev->set_state_shutdown) {
- SEQ_printf(m, " shutdown: ");
- print_name_offset(m, dev->set_state_shutdown);
- SEQ_printf(m, "\n");
- }
+ }
- if (dev->set_state_periodic) {
- SEQ_printf(m, " periodic: ");
- print_name_offset(m, dev->set_state_periodic);
- SEQ_printf(m, "\n");
- }
+ if (dev->set_state_periodic) {
+ SEQ_printf(m, " periodic: ");
+ print_name_offset(m, dev->set_state_periodic);
+ SEQ_printf(m, "\n");
+ }
- if (dev->set_state_oneshot) {
- SEQ_printf(m, " oneshot: ");
- print_name_offset(m, dev->set_state_oneshot);
- SEQ_printf(m, "\n");
- }
+ if (dev->set_state_oneshot) {
+ SEQ_printf(m, " oneshot: ");
+ print_name_offset(m, dev->set_state_oneshot);
+ SEQ_printf(m, "\n");
+ }
- if (dev->set_state_oneshot_stopped) {
- SEQ_printf(m, " oneshot stopped: ");
- print_name_offset(m, dev->set_state_oneshot_stopped);
- SEQ_printf(m, "\n");
- }
+ if (dev->set_state_oneshot_stopped) {
+ SEQ_printf(m, " oneshot stopped: ");
+ print_name_offset(m, dev->set_state_oneshot_stopped);
+ SEQ_printf(m, "\n");
+ }
- if (dev->tick_resume) {
- SEQ_printf(m, " resume: ");
- print_name_offset(m, dev->tick_resume);
- SEQ_printf(m, "\n");
- }
+ if (dev->tick_resume) {
+ SEQ_printf(m, " resume: ");
+ print_name_offset(m, dev->tick_resume);
+ SEQ_printf(m, "\n");
}
SEQ_printf(m, " event_handler: ");
/* Extract X.509 certificate in DER form from PKCS#11 or PEM.
*
- * Copyright © 2014 Red Hat, Inc. All Rights Reserved.
- * Copyright © 2015 Intel Corporation.
+ * Copyright © 2014-2015 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2015 Intel Corporation.
*
* Authors: David Howells <dhowells@redhat.com>
* David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the licence, or (at your option) any later version.
*/
#define _GNU_SOURCE
#include <stdio.h>
/* Sign a module file using the given key.
*
- * Copyright (C) 2014 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
+ * Copyright © 2014-2015 Red Hat, Inc. All Rights Reserved.
+ * Copyright © 2015 Intel Corporation.
+ *
+ * Authors: David Howells <dhowells@redhat.com>
+ * David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the licence, or (at your option) any later version.
*/
#define _GNU_SOURCE
#include <stdio.h>
bool match = false;
RCU_LOCKDEP_WARN(!rcu_read_lock_held() &&
- lockdep_is_held(&devcgroup_mutex),
+ !lockdep_is_held(&devcgroup_mutex),
"device_cgroup:verify_new_ex called without proper synchronization");
if (dev_cgroup->behavior == DEVCG_DEFAULT_ALLOW) {
if (!evsel->attr.sample_id_all) {
sample->cpu = 0;
sample->time = 0;
- sample->tid = event->comm.tid;
- sample->pid = event->comm.pid;
+ sample->tid = event->fork.tid;
+ sample->pid = event->fork.pid;
}
print_sample_start(sample, thread, evsel);
perf_event__fprintf(event, stdout);
.disabled = 1,
.freq = 1,
};
+ struct cpu_map *cpus;
+ struct thread_map *threads;
attr.sample_freq = 500;
}
perf_evlist__add(evlist, evsel);
- evlist->cpus = cpu_map__dummy_new();
- evlist->threads = thread_map__new_by_tid(getpid());
- if (!evlist->cpus || !evlist->threads) {
+ cpus = cpu_map__dummy_new();
+ threads = thread_map__new_by_tid(getpid());
+ if (!cpus || !threads) {
err = -ENOMEM;
pr_debug("Not enough memory to create thread/cpu maps\n");
- goto out_delete_evlist;
+ goto out_free_maps;
}
+ perf_evlist__set_maps(evlist, cpus, threads);
+
+ cpus = NULL;
+ threads = NULL;
+
if (perf_evlist__open(evlist)) {
const char *knob = "/proc/sys/kernel/perf_event_max_sample_rate";
err = -1;
}
+out_free_maps:
+ cpu_map__put(cpus);
+ thread_map__put(threads);
out_delete_evlist:
perf_evlist__delete(evlist);
return err;
};
const char *argv[] = { "true", NULL };
char sbuf[STRERR_BUFSIZE];
+ struct cpu_map *cpus;
+ struct thread_map *threads;
signal(SIGCHLD, sig_handler);
* perf_evlist__prepare_workload we'll fill in the only thread
* we're monitoring, the one forked there.
*/
- evlist->cpus = cpu_map__dummy_new();
- evlist->threads = thread_map__new_by_tid(-1);
- if (!evlist->cpus || !evlist->threads) {
+ cpus = cpu_map__dummy_new();
+ threads = thread_map__new_by_tid(-1);
+ if (!cpus || !threads) {
err = -ENOMEM;
pr_debug("Not enough memory to create thread/cpu maps\n");
- goto out_delete_evlist;
+ goto out_free_maps;
}
+ perf_evlist__set_maps(evlist, cpus, threads);
+
+ cpus = NULL;
+ threads = NULL;
+
err = perf_evlist__prepare_workload(evlist, &target, argv, false,
workload_exec_failed_signal);
if (err < 0) {
err = -1;
}
+out_free_maps:
+ cpu_map__put(cpus);
+ thread_map__put(threads);
out_delete_evlist:
perf_evlist__delete(evlist);
return err;
&options[nr_options], dso);
nr_options += add_map_opt(browser, &actions[nr_options],
&options[nr_options],
- browser->selection->map);
+ browser->selection ?
+ browser->selection->map : NULL);
/* perf script support */
if (browser->he_selection) {
&actions[nr_options],
&options[nr_options],
thread, NULL);
+ /*
+ * Note that browser->selection != NULL
+ * when browser->he_selection is not NULL,
+ * so we don't need to check browser->selection
+ * before fetching browser->selection->sym like what
+ * we do before fetching browser->selection->map.
+ *
+ * See hist_browser__show_entry.
+ */
nr_options += add_script_opt(browser,
&actions[nr_options],
&options[nr_options],
free(evlist);
}
+static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,
+ struct perf_evsel *evsel)
+{
+ /*
+ * We already have cpus for evsel (via PMU sysfs) so
+ * keep it, if there's no target cpu list defined.
+ */
+ if (!evsel->own_cpus || evlist->has_user_cpus) {
+ cpu_map__put(evsel->cpus);
+ evsel->cpus = cpu_map__get(evlist->cpus);
+ } else if (evsel->cpus != evsel->own_cpus) {
+ cpu_map__put(evsel->cpus);
+ evsel->cpus = cpu_map__get(evsel->own_cpus);
+ }
+
+ thread_map__put(evsel->threads);
+ evsel->threads = thread_map__get(evlist->threads);
+}
+
+static void perf_evlist__propagate_maps(struct perf_evlist *evlist)
+{
+ struct perf_evsel *evsel;
+
+ evlist__for_each(evlist, evsel)
+ __perf_evlist__propagate_maps(evlist, evsel);
+}
+
void perf_evlist__add(struct perf_evlist *evlist, struct perf_evsel *entry)
{
entry->evlist = evlist;
if (!evlist->nr_entries++)
perf_evlist__set_id_pos(evlist);
+
+ __perf_evlist__propagate_maps(evlist, entry);
}
void perf_evlist__splice_list_tail(struct perf_evlist *evlist,
- struct list_head *list,
- int nr_entries)
+ struct list_head *list)
{
- bool set_id_pos = !evlist->nr_entries;
+ struct perf_evsel *evsel, *temp;
- list_splice_tail(list, &evlist->entries);
- evlist->nr_entries += nr_entries;
- if (set_id_pos)
- perf_evlist__set_id_pos(evlist);
+ __evlist__for_each_safe(list, temp, evsel) {
+ list_del_init(&evsel->node);
+ perf_evlist__add(evlist, evsel);
+ }
}
void __perf_evlist__set_leader(struct list_head *list)
list_add_tail(&evsel->node, &head);
}
- perf_evlist__splice_list_tail(evlist, &head, nr_attrs);
+ perf_evlist__splice_list_tail(evlist, &head);
return 0;
return perf_evlist__mmap_ex(evlist, pages, overwrite, 0, false);
}
-static int perf_evlist__propagate_maps(struct perf_evlist *evlist,
- bool has_user_cpus)
-{
- struct perf_evsel *evsel;
-
- evlist__for_each(evlist, evsel) {
- /*
- * We already have cpus for evsel (via PMU sysfs) so
- * keep it, if there's no target cpu list defined.
- */
- if (evsel->cpus && has_user_cpus)
- cpu_map__put(evsel->cpus);
-
- if (!evsel->cpus || has_user_cpus)
- evsel->cpus = cpu_map__get(evlist->cpus);
-
- evsel->threads = thread_map__get(evlist->threads);
-
- if ((evlist->cpus && !evsel->cpus) ||
- (evlist->threads && !evsel->threads))
- return -ENOMEM;
- }
-
- return 0;
-}
-
int perf_evlist__create_maps(struct perf_evlist *evlist, struct target *target)
{
- evlist->threads = thread_map__new_str(target->pid, target->tid,
- target->uid);
+ struct cpu_map *cpus;
+ struct thread_map *threads;
+
+ threads = thread_map__new_str(target->pid, target->tid, target->uid);
- if (evlist->threads == NULL)
+ if (!threads)
return -1;
if (target__uses_dummy_map(target))
- evlist->cpus = cpu_map__dummy_new();
+ cpus = cpu_map__dummy_new();
else
- evlist->cpus = cpu_map__new(target->cpu_list);
+ cpus = cpu_map__new(target->cpu_list);
- if (evlist->cpus == NULL)
+ if (!cpus)
goto out_delete_threads;
- return perf_evlist__propagate_maps(evlist, !!target->cpu_list);
+ evlist->has_user_cpus = !!target->cpu_list;
+
+ perf_evlist__set_maps(evlist, cpus, threads);
+
+ return 0;
out_delete_threads:
- thread_map__put(evlist->threads);
- evlist->threads = NULL;
+ thread_map__put(threads);
return -1;
}
-int perf_evlist__set_maps(struct perf_evlist *evlist,
- struct cpu_map *cpus,
- struct thread_map *threads)
+void perf_evlist__set_maps(struct perf_evlist *evlist, struct cpu_map *cpus,
+ struct thread_map *threads)
{
- if (evlist->cpus)
+ /*
+ * Allow for the possibility that one or another of the maps isn't being
+ * changed i.e. don't put it. Note we are assuming the maps that are
+ * being applied are brand new and evlist is taking ownership of the
+ * original reference count of 1. If that is not the case it is up to
+ * the caller to increase the reference count.
+ */
+ if (cpus != evlist->cpus) {
cpu_map__put(evlist->cpus);
+ evlist->cpus = cpus;
+ }
- evlist->cpus = cpus;
-
- if (evlist->threads)
+ if (threads != evlist->threads) {
thread_map__put(evlist->threads);
+ evlist->threads = threads;
+ }
- evlist->threads = threads;
-
- return perf_evlist__propagate_maps(evlist, false);
+ perf_evlist__propagate_maps(evlist);
}
int perf_evlist__apply_filters(struct perf_evlist *evlist, struct perf_evsel **err_evsel)
static int perf_evlist__create_syswide_maps(struct perf_evlist *evlist)
{
+ struct cpu_map *cpus;
+ struct thread_map *threads;
int err = -ENOMEM;
/*
* error, and we may not want to do that fallback to a
* default cpu identity map :-\
*/
- evlist->cpus = cpu_map__new(NULL);
- if (evlist->cpus == NULL)
+ cpus = cpu_map__new(NULL);
+ if (!cpus)
goto out;
- evlist->threads = thread_map__new_dummy();
- if (evlist->threads == NULL)
- goto out_free_cpus;
+ threads = thread_map__new_dummy();
+ if (!threads)
+ goto out_put;
- err = 0;
+ perf_evlist__set_maps(evlist, cpus, threads);
out:
return err;
-out_free_cpus:
- cpu_map__put(evlist->cpus);
- evlist->cpus = NULL;
+out_put:
+ cpu_map__put(cpus);
goto out;
}
int nr_mmaps;
bool overwrite;
bool enabled;
+ bool has_user_cpus;
size_t mmap_len;
int id_pos;
int is_pos;
void perf_evlist__set_selected(struct perf_evlist *evlist,
struct perf_evsel *evsel);
-int perf_evlist__set_maps(struct perf_evlist *evlist,
- struct cpu_map *cpus,
- struct thread_map *threads);
+void perf_evlist__set_maps(struct perf_evlist *evlist, struct cpu_map *cpus,
+ struct thread_map *threads);
int perf_evlist__create_maps(struct perf_evlist *evlist, struct target *target);
int perf_evlist__apply_filters(struct perf_evlist *evlist, struct perf_evsel **err_evsel);
bool perf_evlist__valid_read_format(struct perf_evlist *evlist);
void perf_evlist__splice_list_tail(struct perf_evlist *evlist,
- struct list_head *list,
- int nr_entries);
+ struct list_head *list);
static inline struct perf_evsel *perf_evlist__first(struct perf_evlist *evlist)
{
perf_evsel__free_config_terms(evsel);
close_cgroup(evsel->cgrp);
cpu_map__put(evsel->cpus);
+ cpu_map__put(evsel->own_cpus);
thread_map__put(evsel->threads);
zfree(&evsel->group_name);
zfree(&evsel->name);
struct cgroup_sel *cgrp;
void *handler;
struct cpu_map *cpus;
+ struct cpu_map *own_cpus;
struct thread_map *threads;
unsigned int sample_size;
int id_pos;
if (ph->needs_swap)
nr = bswap_32(nr);
- ph->env.nr_cpus_online = nr;
+ ph->env.nr_cpus_avail = nr;
ret = readn(fd, &nr, sizeof(nr));
if (ret != sizeof(nr))
if (ph->needs_swap)
nr = bswap_32(nr);
- ph->env.nr_cpus_avail = nr;
+ ph->env.nr_cpus_online = nr;
return 0;
}
if (err)
return err;
if (event->header.type == PERF_RECORD_EXIT) {
- err = intel_bts_process_tid_exit(bts, event->comm.tid);
+ err = intel_bts_process_tid_exit(bts, event->fork.tid);
if (err)
return err;
}
if (pt->timeless_decoding) {
if (event->header.type == PERF_RECORD_EXIT) {
err = intel_pt_process_timeless_queues(pt,
- event->comm.tid,
+ event->fork.tid,
sample->time);
}
} else if (timestamp) {
if (!evsel)
return NULL;
- if (cpus)
- evsel->cpus = cpu_map__get(cpus);
+ evsel->cpus = cpu_map__get(cpus);
+ evsel->own_cpus = cpu_map__get(cpus);
if (name)
evsel->name = strdup(name);
ret = parse_events__scanner(str, &data, PE_START_EVENTS);
perf_pmu__parse_cleanup();
if (!ret) {
- int entries = data.idx - evlist->nr_entries;
struct perf_evsel *last;
- perf_evlist__splice_list_tail(evlist, &data.list, entries);
+ perf_evlist__splice_list_tail(evlist, &data.list);
evlist->nr_groups += data.nr_groups;
last = perf_evlist__last(evlist);
last->cmdline_group_boundary = true;
list_add_tail(&term->list, head);
ALLOC_LIST(list);
- ABORT_ON(parse_events_add_pmu(list, &data->idx, "cpu", head));
+ ABORT_ON(parse_events_add_pmu(data, list, "cpu", head));
parse_events__free_terms(head);
$$ = list;
}
v86->regs.eip = eip;
ret = vm86(VM86_ENTER, v86);
- if (ret == -1 && errno == ENOSYS) {
- printf("[SKIP]\tvm86 not supported\n");
+ if (ret == -1 && (errno == ENOSYS || errno == EPERM)) {
+ printf("[SKIP]\tvm86 %s\n",
+ errno == ENOSYS ? "not supported" : "not allowed");
return false;
}