]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
dmaengine: k3: Split device_control
authorMaxime Ripard <maxime.ripard@free-electrons.com>
Mon, 17 Nov 2014 13:42:20 +0000 (14:42 +0100)
committerVinod Koul <vinod.koul@intel.com>
Mon, 22 Dec 2014 06:58:59 +0000 (12:28 +0530)
Split the device_control callback of the Hisilicon K3 DMA driver to make use
of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
drivers/dma/k3dma.c

index a1de14ab2c511e2eec6b2f100999f54f769afbbd..49be7f687c4cd140891adf40b1bfcdaa493729cb 100644 (file)
@@ -441,7 +441,7 @@ static struct dma_async_tx_descriptor *k3_dma_prep_memcpy(
        num = 0;
 
        if (!c->ccfg) {
-               /* default is memtomem, without calling device_control */
+               /* default is memtomem, without calling device_config */
                c->ccfg = CX_CFG_SRCINCR | CX_CFG_DSTINCR | CX_CFG_EN;
                c->ccfg |= (0xf << 20) | (0xf << 24);   /* burst = 16 */
                c->ccfg |= (0x3 << 12) | (0x3 << 16);   /* width = 64 bit */
@@ -523,112 +523,126 @@ static struct dma_async_tx_descriptor *k3_dma_prep_slave_sg(
        return vchan_tx_prep(&c->vc, &ds->vd, flags);
 }
 
-static int k3_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
-       unsigned long arg)
+static int k3_dma_config(struct dma_chan *chan,
+                        struct dma_slave_config *cfg)
+{
+       struct k3_dma_chan *c = to_k3_chan(chan);
+       u32 maxburst = 0, val = 0;
+       enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
+
+       if (cfg == NULL)
+               return -EINVAL;
+       c->dir = cfg->direction;
+       if (c->dir == DMA_DEV_TO_MEM) {
+               c->ccfg = CX_CFG_DSTINCR;
+               c->dev_addr = cfg->src_addr;
+               maxburst = cfg->src_maxburst;
+               width = cfg->src_addr_width;
+       } else if (c->dir == DMA_MEM_TO_DEV) {
+               c->ccfg = CX_CFG_SRCINCR;
+               c->dev_addr = cfg->dst_addr;
+               maxburst = cfg->dst_maxburst;
+               width = cfg->dst_addr_width;
+       }
+       switch (width) {
+       case DMA_SLAVE_BUSWIDTH_1_BYTE:
+       case DMA_SLAVE_BUSWIDTH_2_BYTES:
+       case DMA_SLAVE_BUSWIDTH_4_BYTES:
+       case DMA_SLAVE_BUSWIDTH_8_BYTES:
+               val =  __ffs(width);
+               break;
+       default:
+               val = 3;
+               break;
+       }
+       c->ccfg |= (val << 12) | (val << 16);
+
+       if ((maxburst == 0) || (maxburst > 16))
+               val = 16;
+       else
+               val = maxburst - 1;
+       c->ccfg |= (val << 20) | (val << 24);
+       c->ccfg |= CX_CFG_MEM2PER | CX_CFG_EN;
+
+       /* specific request line */
+       c->ccfg |= c->vc.chan.chan_id << 4;
+
+       return 0;
+}
+
+static int k3_dma_terminate_all(struct dma_chan *chan)
 {
        struct k3_dma_chan *c = to_k3_chan(chan);
        struct k3_dma_dev *d = to_k3_dma(chan->device);
-       struct dma_slave_config *cfg = (void *)arg;
        struct k3_dma_phy *p = c->phy;
        unsigned long flags;
-       u32 maxburst = 0, val = 0;
-       enum dma_slave_buswidth width = DMA_SLAVE_BUSWIDTH_UNDEFINED;
        LIST_HEAD(head);
 
-       switch (cmd) {
-       case DMA_SLAVE_CONFIG:
-               if (cfg == NULL)
-                       return -EINVAL;
-               c->dir = cfg->direction;
-               if (c->dir == DMA_DEV_TO_MEM) {
-                       c->ccfg = CX_CFG_DSTINCR;
-                       c->dev_addr = cfg->src_addr;
-                       maxburst = cfg->src_maxburst;
-                       width = cfg->src_addr_width;
-               } else if (c->dir == DMA_MEM_TO_DEV) {
-                       c->ccfg = CX_CFG_SRCINCR;
-                       c->dev_addr = cfg->dst_addr;
-                       maxburst = cfg->dst_maxburst;
-                       width = cfg->dst_addr_width;
-               }
-               switch (width) {
-               case DMA_SLAVE_BUSWIDTH_1_BYTE:
-               case DMA_SLAVE_BUSWIDTH_2_BYTES:
-               case DMA_SLAVE_BUSWIDTH_4_BYTES:
-               case DMA_SLAVE_BUSWIDTH_8_BYTES:
-                       val =  __ffs(width);
-                       break;
-               default:
-                       val = 3;
-                       break;
-               }
-               c->ccfg |= (val << 12) | (val << 16);
+       dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc);
 
-               if ((maxburst == 0) || (maxburst > 16))
-                       val = 16;
-               else
-                       val = maxburst - 1;
-               c->ccfg |= (val << 20) | (val << 24);
-               c->ccfg |= CX_CFG_MEM2PER | CX_CFG_EN;
+       /* Prevent this channel being scheduled */
+       spin_lock(&d->lock);
+       list_del_init(&c->node);
+       spin_unlock(&d->lock);
 
-               /* specific request line */
-               c->ccfg |= c->vc.chan.chan_id << 4;
-               break;
+       /* Clear the tx descriptor lists */
+       spin_lock_irqsave(&c->vc.lock, flags);
+       vchan_get_all_descriptors(&c->vc, &head);
+       if (p) {
+               /* vchan is assigned to a pchan - stop the channel */
+               k3_dma_terminate_chan(p, d);
+               c->phy = NULL;
+               p->vchan = NULL;
+               p->ds_run = p->ds_done = NULL;
+       }
+       spin_unlock_irqrestore(&c->vc.lock, flags);
+       vchan_dma_desc_free_list(&c->vc, &head);
 
-       case DMA_TERMINATE_ALL:
-               dev_dbg(d->slave.dev, "vchan %p: terminate all\n", &c->vc);
+       return 0;
+}
 
-               /* Prevent this channel being scheduled */
-               spin_lock(&d->lock);
-               list_del_init(&c->node);
-               spin_unlock(&d->lock);
+static int k3_dma_pause(struct dma_chan *chan)
+{
+       struct k3_dma_chan *c = to_k3_chan(chan);
+       struct k3_dma_dev *d = to_k3_dma(chan->device);
+       struct k3_dma_phy *p = c->phy;
 
-               /* Clear the tx descriptor lists */
-               spin_lock_irqsave(&c->vc.lock, flags);
-               vchan_get_all_descriptors(&c->vc, &head);
+       dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc);
+       if (c->status == DMA_IN_PROGRESS) {
+               c->status = DMA_PAUSED;
                if (p) {
-                       /* vchan is assigned to a pchan - stop the channel */
-                       k3_dma_terminate_chan(p, d);
-                       c->phy = NULL;
-                       p->vchan = NULL;
-                       p->ds_run = p->ds_done = NULL;
+                       k3_dma_pause_dma(p, false);
+               } else {
+                       spin_lock(&d->lock);
+                       list_del_init(&c->node);
+                       spin_unlock(&d->lock);
                }
-               spin_unlock_irqrestore(&c->vc.lock, flags);
-               vchan_dma_desc_free_list(&c->vc, &head);
-               break;
+       }
 
-       case DMA_PAUSE:
-               dev_dbg(d->slave.dev, "vchan %p: pause\n", &c->vc);
-               if (c->status == DMA_IN_PROGRESS) {
-                       c->status = DMA_PAUSED;
-                       if (p) {
-                               k3_dma_pause_dma(p, false);
-                       } else {
-                               spin_lock(&d->lock);
-                               list_del_init(&c->node);
-                               spin_unlock(&d->lock);
-                       }
-               }
-               break;
+       return 0;
+}
 
-       case DMA_RESUME:
-               dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc);
-               spin_lock_irqsave(&c->vc.lock, flags);
-               if (c->status == DMA_PAUSED) {
-                       c->status = DMA_IN_PROGRESS;
-                       if (p) {
-                               k3_dma_pause_dma(p, true);
-                       } else if (!list_empty(&c->vc.desc_issued)) {
-                               spin_lock(&d->lock);
-                               list_add_tail(&c->node, &d->chan_pending);
-                               spin_unlock(&d->lock);
-                       }
+static int k3_dma_resume(struct dma_chan *chan)
+{
+       struct k3_dma_chan *c = to_k3_chan(chan);
+       struct k3_dma_dev *d = to_k3_dma(chan->device);
+       struct k3_dma_phy *p = c->phy;
+       unsigned long flags;
+
+       dev_dbg(d->slave.dev, "vchan %p: resume\n", &c->vc);
+       spin_lock_irqsave(&c->vc.lock, flags);
+       if (c->status == DMA_PAUSED) {
+               c->status = DMA_IN_PROGRESS;
+               if (p) {
+                       k3_dma_pause_dma(p, true);
+               } else if (!list_empty(&c->vc.desc_issued)) {
+                       spin_lock(&d->lock);
+                       list_add_tail(&c->node, &d->chan_pending);
+                       spin_unlock(&d->lock);
                }
-               spin_unlock_irqrestore(&c->vc.lock, flags);
-               break;
-       default:
-               return -ENXIO;
        }
+       spin_unlock_irqrestore(&c->vc.lock, flags);
+
        return 0;
 }
 
@@ -720,7 +734,10 @@ static int k3_dma_probe(struct platform_device *op)
        d->slave.device_prep_dma_memcpy = k3_dma_prep_memcpy;
        d->slave.device_prep_slave_sg = k3_dma_prep_slave_sg;
        d->slave.device_issue_pending = k3_dma_issue_pending;
-       d->slave.device_control = k3_dma_control;
+       d->slave.device_config = k3_dma_config;
+       d->slave.device_pause = k3_dma_pause;
+       d->slave.device_resume = k3_dma_resume;
+       d->slave.device_terminate_all = k3_dma_terminate_all;
        d->slave.copy_align = DMA_ALIGN;
 
        /* init virtual channel */