#
# Licensed under GPLv2
-config CPU_S3C2440
- bool
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select S3C2440_DMA if S3C2410_DMA
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
- bool
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
- bool
- depends on CPU_S3C2440 || CPU_S3C2442
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-
-
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
default y if CPU_FREQ_S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
-config S3C2440_DMA
- bool
- depends on CPU_S3C2440
- help
- Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 and S3C2442 Machines"
-
-config MACH_ANUBIS
- bool "Simtec Electronics ANUBIS"
- select CPU_S3C2440
- select S3C24XX_DCLK
- select PM_SIMTEC if PM
- select HAVE_PATA_PLATFORM
- select S3C24XX_GPIO_EXTRA64
- select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Simtec Electronics ANUBIS
- development system
-
-config MACH_NEO1973_GTA02
- bool "Openmoko GTA02 / Freerunner phone"
- select CPU_S3C2442
- select MFD_PCF50633
- select PCF50633_GPIO
- select I2C
- select POWER_SUPPLY
- select MACH_NEO1973
- select S3C2410_PWM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_OSIRIS
- bool "Simtec IM2440D20 (OSIRIS) module"
- select CPU_S3C2440
- select S3C24XX_DCLK
- select PM_SIMTEC if PM
- select S3C24XX_GPIO_EXTRA128
- select S3C2440_XTAL_12000000
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Simtec IM2440D20 module, also
- known as the Osiris.
-
-config MACH_OSIRIS_DVS
- tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
- depends on MACH_OSIRIS
- select TPS65010
- help
- Say Y/M here if you want to have dynamic voltage scaling support
- on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
- The DVS driver alters the voltage supplied to the ARM core
- depending on the frequency it is running at. The driver itself
- does not do any of the frequency alteration, which is left up
- to the cpufreq driver.
-
-config MACH_RX3715
- bool "HP iPAQ rx3715"
- select CPU_S3C2440
- select S3C2440_XTAL_16934400
- select PM_H1940 if PM
- select S3C_DEV_NAND
- help
- Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
- bool "SMDK2440"
- select CPU_S3C2440
- select S3C2440_XTAL_16934400
- select MACH_SMDK
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the SMDK2440.
-
-config MACH_NEXCODER_2440
- bool "NexVision NEXCODER 2440 Light Board"
- select CPU_S3C2440
- select S3C2440_XTAL_12000000
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config SMDK2440_CPU2440
- bool "SMDK2440 with S3C2440 CPU module"
- default y if ARCH_S3C2440
- select S3C2440_XTAL_16934400
- select CPU_S3C2440
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- select CPU_S3C2442
-
-config MACH_AT2440EVB
- bool "Avantech AT2440EVB development board"
- select CPU_S3C2440
- select S3C_DEV_USB_HOST
- select S3C_DEV_NAND
- help
- Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
- bool "MINI2440 development board"
- select CPU_S3C2440
- select EEPROM_AT24
- select NEW_LEDS
- select LEDS_CLASS
- select LEDS_TRIGGER
- select LEDS_TRIGGER_BACKLIGHT
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- help
- Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
- available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_RX1950
- bool "HP iPAQ rx1950"
- select CPU_S3C2442
- select S3C24XX_DCLK
- select PM_H1940 if PM
- select I2C
- select S3C2410_PWM
- select S3C_DEV_NAND
- select S3C2410_IOTIMING if S3C2440_CPUFREQ
- select S3C2440_XTAL_16934400
- help
- Say Y here if you're using HP iPAQ rx1950
-
-endmenu
obj-n :=
obj- :=
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C2440) += dsc.o
-obj-$(CONFIG_CPU_S3C2440) += irq.o
-obj-$(CONFIG_CPU_S3C2440) += clock.o
-obj-$(CONFIG_S3C2440_DMA) += dma.o
-
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
-obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
-
-# extra machine support
-
-obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
+++ /dev/null
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Common Header for S3C2440 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
-#define __ARCH_ARM_MACH_S3C2440_COMMON_H
-
-void s3c2440_restart(char mode, const char *cmd);
-
-#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
help
Support for the S3C2416 SoC from the S3C24XX line
+config CPU_S3C2440
+ bool "SAMSUNG S3C2440"
+ select CPU_ARM920T
+ select CPU_LLSERIAL_S3C2440
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ select S3C2440_DMA if S3C24XX_DMA
+ help
+ Support for S3C2440 Samsung Mobile CPU based systems.
+
+config CPU_S3C2442
+ bool "SAMSUNG S3C2442"
+ select CPU_ARM920T
+ select CPU_LLSERIAL_S3C2440
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+ def_bool y
+ depends on CPU_S3C2440 || CPU_S3C2442
+
if CPU_S3C2410
config S3C2410_DMA
bool
- depends on S3C24XX_DMA && CPU_S3C2410
- default y if CPU_S3C2410
+ depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
+ default y if CPU_S3C2410 || CPU_S3C2442
help
DMA device selection for S3C2410 and compatible CPUs
endif # CPU_S3C2416
+if CPU_S3C2440
+
+config S3C2440_DMA
+ bool
+ help
+ Support for S3C2440 specific DMA code5A
+
+comment "S3C2440 Boards"
+
+#
+# The "S3C2440 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select S3C24XX_DCLK
+ select PM_SIMTEC if PM
+ select HAVE_PATA_PLATFORM
+ select S3C24XX_GPIO_EXTRA64
+ select S3C2440_XTAL_12000000
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Simtec Electronics ANUBIS
+ development system
+
+config MACH_AT2440EVB
+ bool "Avantech AT2440EVB development board"
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the AT2440EVB development board
+
+config MACH_MINI2440
+ bool "MINI2440 development board"
+ select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
+ select LEDS_TRIGGER_BACKLIGHT
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
+ available via various sources. It can come with a 3.5" or 7" touch LCD.
+
+config MACH_NEXCODER_2440
+ bool "NexVision NEXCODER 2440 Light Board"
+ select S3C2440_XTAL_12000000
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select S3C24XX_DCLK
+ select PM_SIMTEC if PM
+ select S3C24XX_GPIO_EXTRA128
+ select S3C2440_XTAL_12000000
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
+config MACH_OSIRIS_DVS
+ tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+ depends on MACH_OSIRIS
+ select TPS65010
+ help
+ Say Y/M here if you want to have dynamic voltage scaling support
+ on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+ The DVS driver alters the voltage supplied to the ARM core
+ depending on the frequency it is running at. The driver itself
+ does not do any of the frequency alteration, which is left up
+ to the cpufreq driver.
+
+config MACH_RX3715
+ bool "HP iPAQ rx3715"
+ select S3C2440_XTAL_16934400
+ select PM_H1940 if PM
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+ bool "SMDK2440"
+ select S3C2440_XTAL_16934400
+ select MACH_SMDK
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ help
+ Say Y here if you are using the SMDK2440.
+
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 CPU module"
+ default y if ARCH_S3C2440
+ select S3C2440_XTAL_16934400
+
+endif # CPU_S3C2440
+
+if CPU_S3C2442
+
+comment "S3C2442 Boards"
+
+#
+# The "S3C2442 Boards" list is ordered alphabetically by option text.
+# (without ARCH_ or MACH_)
+#
+
+config MACH_NEO1973_GTA02
+ bool "Openmoko GTA02 / Freerunner phone"
+ select MFD_PCF50633
+ select PCF50633_GPIO
+ select I2C
+ select POWER_SUPPLY
+ select MACH_NEO1973
+ select S3C2410_PWM
+ select S3C_DEV_USB_HOST
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
+config MACH_RX1950
+ bool "HP iPAQ rx1950"
+ select S3C24XX_DCLK
+ select PM_H1940 if PM
+ select I2C
+ select S3C2410_PWM
+ select S3C_DEV_NAND
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2440_XTAL_16934400
+ help
+ Say Y here if you're using HP iPAQ rx1950
+
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+
+endif # CPU_S3C2440
+
endmenu # SAMSUNG S3C24XX SoCs Support
endif # ARCH_S3C24XX
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
+
#
# machine support
# following is ordered alphabetically by option text.
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
+obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
+obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
+obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
+obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
+
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
+
# common bits of machine support
obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
# machine additions
obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
+obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
#define __ARCH_ARM_MACH_S3C2410_COMMON_H
+#ifdef CONFIG_CPU_S3C2410
void s3c2410_restart(char mode, const char *cmd);
+#endif
+
+#ifdef CONFIG_CPU_S3C2440
+void s3c2440_restart(char mode, const char *cmd);
+#endif
#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
projects / karo-tx-linux.git / commitdiff