clock-frequency = <600000000>;
status = "okay";
};
+
+ pinctrl {
+ pwr_led_pin: pwr-led-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ stat_led_pins: stat-led-pins {
+ marvell,pins = "mpp64", "mpp65";
+ marvell,function = "gpio";
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
+
+ green_pwr_led {
+ label = "mirabox:green:pwr";
+ gpios = <&gpio1 31 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ blue_stat_led {
+ label = "mirabox:blue:stat";
+ gpios = <&gpio2 0 1>;
+ linux,default-trigger = "cpu0";
+ };
+
+ green_stat_led {
+ label = "mirabox:green:stat";
+ gpios = <&gpio2 1 1>;
+ default-state = "off";
+ };
+ };
+
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
mvsdio@d00d4000 {
- pinctrl-0 = <&sdio_pins2>;
+ pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
/*
usb@d0051000 {
status = "okay";
};
+
+ i2c@d0011000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pca9505: pca9505@25 {
+ compatible = "nxp,pca9505";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x25>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ /* Internal mini-PCIe connector */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /* Connected on the PCB to a USB 3.0 XHCI controller */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
};
};
"mpp50", "mpp51", "mpp52";
marvell,function = "sd0";
};
+
+ sdio_pins3: sdio-pins3 {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp51", "mpp52", "mpp53";
+ marvell,function = "sd0";
+ };
};
gpio0: gpio@d0018100 {
clocks = <&coreclk 0>;
};
+ thermal@d0018300 {
+ compatible = "marvell,armada370-thermal";
+ reg = <0xd0018300 0x4
+ 0xd0018304 0x4>;
+ status = "okay";
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-370-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+
+ reg = <0xd0040000 0x2000>, <0xd0080000 0x2000>;
+
+ reg-names = "pcie0.0", "pcie1.0";
+
+ ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0xd0080000 0xd0080000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
+ 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 9>;
+ status = "disabled";
+ };
+ };
};
};
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
- <2 6 0x1 0x1 /* PB6 periph A with pullup */
- 2 7 0x1 0x0>; /* PB7 periph A */
+ <1 6 0x1 0x1 /* PB6 periph A with pullup */
+ 1 7 0x1 0x0>; /* PB7 periph A */
};
pinctrl_usart1_rts: usart1_rts-0 {
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
- <2 10 0x1 0x1 /* PB10 periph A with pullup */
- 2 11 0x1 0x0>; /* PB11 periph A */
+ <1 10 0x1 0x1 /* PB10 periph A with pullup */
+ 1 11 0x1 0x0>; /* PB11 periph A */
};
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
- <3 8 0x2 0x0>; /* PB8 periph B */
+ <2 8 0x2 0x0>; /* PC8 periph B */
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
- <3 10 0x2 0x0>; /* PB10 periph B */
+ <2 10 0x2 0x0>; /* PC10 periph B */
};
};
uart1 {
pinctrl_uart1: uart1-0 {
atmel,pins =
- <2 12 0x1 0x1 /* PB12 periph A with pullup */
- 2 13 0x1 0x0>; /* PB13 periph A */
+ <1 12 0x1 0x1 /* PB12 periph A with pullup */
+ 1 13 0x1 0x0>; /* PB13 periph A */
};
};
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */
+ 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */
+ 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
status = "disabled";
};
+ spi0: spi@fffc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffc8000 0x200>;
+ interrupts = <12 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ status = "disabled";
+ };
+
+ spi1: spi@fffcc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ status = "disabled";
+ };
+
adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
atmel,adc-drdy-mask = <0x10000>;
atmel,adc-status-register = <0x1c>;
atmel,adc-trigger-register = <0x04>;
+ atmel,adc-res = <8 10>;
+ atmel,adc-res-names = "lowres", "highres";
+ atmel,adc-use-res = "highres";
trigger@0 {
trigger-name = "timer-counter-0";
};
};
};
+
+ spi0: spi@fffa4000 {
+ status = "okay";
+ cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
};
nand0: nand@40000000 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
left_click {
label = "left_click";
status = "okay";
pinctrl-0 = <&pinctrl_ssc0_tx>;
};
+
+ spi0: spi@fffc8000 {
+ status = "okay";
+ cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+ };
};
nand0: nand@40000000 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
btn3 {
label = "Button 3";
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */
+ 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */
+ 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
atmel,adc-drdy-mask = <0x10000>;
atmel,adc-status-register = <0x1c>;
atmel,adc-trigger-register = <0x08>;
+ atmel,adc-res = <8 10>;
+ atmel,adc-res-names = "lowres", "highres";
+ atmel,adc-use-res = "highres";
trigger@0 {
trigger-name = "external-rising";
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
status = "disabled";
+ };
+
+ spi0: spi@fffa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa4000 0x200>;
+ interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ status = "disabled";
+ };
+
+ spi1: spi@fffa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa8000 0x200>;
+ interrupts = <15 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ status = "disabled";
};
};
};
};
};
+
+ spi0: spi@fffa4000{
+ status = "okay";
+ cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <13000000>;
+ reg = <0>;
+ };
+ };
};
nand0: nand@40000000 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
left_click {
label = "left_click";
};
};
};
+
+ spi0: spi@f0000000 {
+ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
};
nand0: nand@40000000 {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
enter {
label = "Enter";
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */
+ 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */
+ 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */
+ 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */
+ 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <0 30 0x1 0x0 /* PA30 periph A I2C0 data */
+ 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <2 0 0x3 0x0 /* PC0 periph C I2C1 data */
+ 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2: i2c2-0 {
+ atmel,pins =
+ <1 4 0x2 0x0 /* PB4 periph B I2C2 data */
+ 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */
+ };
+ };
+
+ i2c_gpio0 {
+ pinctrl_i2c_gpio0: i2c_gpio0-0 {
+ atmel,pins =
+ <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */
+ 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */
+ };
+ };
+
+ i2c_gpio1 {
+ pinctrl_i2c_gpio1: i2c_gpio1-0 {
+ atmel,pins =
+ <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */
+ 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */
+ };
+ };
+
+ i2c_gpio2 {
+ pinctrl_i2c_gpio2: i2c_gpio2-0 {
+ atmel,pins =
+ <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */
+ 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <9 4 6>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
status = "disabled";
};
interrupts = <10 4 6>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "disabled";
};
interrupts = <11 4 6>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "disabled";
};
atmel,adc-drdy-mask = <0x1000000>;
atmel,adc-status-register = <0x30>;
atmel,adc-trigger-register = <0xc0>;
+ atmel,adc-res = <8 10>;
+ atmel,adc-res-names = "lowres", "highres";
+ atmel,adc-use-res = "highres";
trigger@0 {
trigger-name = "external-rising";
};
};
+ spi0: spi@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0000000 0x100>;
+ interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ status = "disabled";
+ };
+
+ spi1: spi@f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ status = "disabled";
+ };
++
+ rtc@fffffeb0 {
+ compatible = "atmel,at91rm9200-rtc";
+ reg = <0xfffffeb0 0x40>;
+ interrupts = <1 4 7>;
+ status = "disabled";
+ };
};
nand0: nand@40000000 {
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio0>;
status = "disabled";
};
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio1>;
status = "disabled";
};
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio2>;
status = "disabled";
};
};
compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen {
- bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
};
ahb {
status = "okay";
};
- macb0: ethernet@f802c000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
i2c0: i2c@f8010000 {
status = "okay";
};
- i2c1: i2c@f8014000 {
- status = "okay";
- };
-
- i2c2: i2c@f8018000 {
- status = "okay";
- };
-
pinctrl@fffff400 {
mmc0 {
pinctrl_board_mmc0: mmc0-board {
};
};
};
+
+ spi0: spi@f0000000 {
+ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ m25p80@0 {
+ compatible = "atmel,at25df321a";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+ };
};
usb0: ohci@00600000 {
* http://www.gnu.org/copyleft/gpl.html
*/
- /include/ "skeleton.dtsi"
+ #include "skeleton.dtsi"
/ {
aliases {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
+ clocks = <&clks 15>;
};
L2: l2-cache@00a02000 {
cache-level = <2>;
};
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 94 0x04>;
+ };
+
aips-bus@02000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
compatible = "fsl,imx6q-gpt";
reg = <0x02098000 0x4000>;
interrupts = <0 55 0x04>;
+ clocks = <&clks 119>, <&clks 120>;
+ clock-names = "ipg", "per";
};
gpio1: gpio@0209c000 {
};
src: src@020d8000 {
- compatible = "fsl,imx6q-src";
+ compatible = "fsl,imx6q-src", "fsl,imx51-src";
reg = <0x020d8000 0x4000>;
interrupts = <0 91 0x04 0 96 0x04>;
+ #reset-cells = <1>;
};
gpc: gpc@020dc000 {
reg = <0x020e0000 0x38>;
};
+ ldb: ldb@020e0008 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ldb", "fsl,imx53-ldb";
+ gpr = <&gpr>;
+ status = "disabled";
+
+ lvds-channel@0 {
+ reg = <0>;
+ crtcs = <&ipu1 0>;
+ status = "disabled";
+ };
+
+ lvds-channel@1 {
+ reg = <1>;
+ crtcs = <&ipu1 1>;
+ status = "disabled";
+ };
+ };
+
dcic1: dcic@020e4000 {
reg = <0x020e4000 0x4000>;
interrupts = <0 124 0x04>;
interrupts = <0 6 0x4 0 5 0x4>;
clocks = <&clks 130>, <&clks 131>, <&clks 132>;
clock-names = "bus", "di0", "di1";
+ resets = <&src 2>;
};
};
};
compatible = "marvell,orion5x";
interrupt-parent = <&intc>;
+ aliases {
+ gpio0 = &gpio0;
+ };
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
- ngpio = <32>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <6>, <7>, <8>, <9>;
};
status = "okay";
};
+ ehci@50000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <17>;
+ status = "disabled";
+ };
+
+ ehci@a0000 {
+ compatible = "marvell,orion-ehci";
+ reg = <0xa0000 0x1000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+
sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
status = "disabled";
};
+ xor@60900 {
+ compatible = "marvell,orion-xor";
+ reg = <0x60900 0x100
+ 0x60b00 0x100>;
+ status = "okay";
+
+ xor00 {
+ interrupts = <30>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor01 {
+ interrupts = <31>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
crypto@90000 {
compatible = "marvell,orion-crypto";
reg = <0x90000 0x10000>,
<0xf2200000 0x800>;
reg-names = "regs", "sram";
- interrupts = <22>;
+ interrupts = <28>;
status = "okay";
};
};
clock-frequency = <24000000>;
};
+ ref25: ref25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ pllb: pllb {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-pll-clock";
+ clocks = <&ref25>;
+ reg = <0x204>;
+ };
+
clkuart0: uart0 {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
enable-reg = <0x250>;
enable-bit = <23>;
};
+
+ clksdhc: sdhc {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&pllb>;
+ divisor-reg = <0x328>;
+ divisor-mask = <0x3f>;
+ enable-reg = <0x254>;
+ enable-bit = <18>;
+ };
};
};
interrupts = <0>;
};
- fb@d8050800 {
+ fb: fb@d8050800 {
compatible = "wm,wm8505-fb";
reg = <0xd8050800 0x200>;
- display = <&display>;
- default-mode = <&mode0>;
};
ge_rops@d8050400 {
reg = <0xd8100000 0x10000>;
interrupts = <48>;
};
+
+ sdhc@d800a000 {
+ compatible = "wm,wm8505-sdhc";
+ reg = <0xd800a000 0x1000>;
+ interrupts = <20 21>;
+ clocks = <&clksdhc>;
+ bus-width = <4>;
+ };
};
};
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_KIRKWOOD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
+ CONFIG_THERMAL=y
+ CONFIG_KIRKWOOD_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_HID_DRAGONRISE=y
#include <linux/of_address.h>
#include <linux/smp.h>
#include <asm/smp_plat.h>
+#include "common.h"
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
src_base + SRC_GPR1 + cpu * 8);
}
+u32 imx_get_cpu_arg(int cpu)
+{
+ cpu = cpu_logical_map(cpu);
+ return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+ cpu = cpu_logical_map(cpu);
+ writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
void imx_src_prepare_restart(void)
{
u32 val;
struct device_node *np;
u32 val;
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx51-src");
+ if (!np)
+ return;
src_base = of_iomap(np, 0);
WARN_ON(!src_base);
Say Y here to enable the imx53 pinctrl driver
config PINCTRL_IMX6Q
- bool "IMX6Q pinctrl driver"
+ bool "IMX6Q/DL pinctrl driver"
depends on OF
depends on SOC_IMX6Q
select PINCTRL_IMX
help
- Say Y here to enable the imx6q pinctrl driver
+ Say Y here to enable the imx6q/dl pinctrl driver
+
+ config PINCTRL_IMX6SL
+ bool "IMX6SL pinctrl driver"
+ depends on OF
+ depends on SOC_IMX6SL
+ select PINCTRL_IMX
+ help
+ Say Y here to enable the imx6sl pinctrl driver
config PINCTRL_LANTIQ
bool
select PINMUX
select PINCONF
-config PINCTRL_PXA3xx
- bool
- select PINMUX
-
config PINCTRL_FALCON
bool
depends on SOC_FALCON
depends on PINCTRL_LANTIQ
-config PINCTRL_MMP2
- bool "MMP2 pin controller driver"
- depends on ARCH_MMP
- select PINCTRL_PXA3xx
-
config PINCTRL_MXS
bool
select PINMUX
bool "DB8540 pin controller driver"
depends on PINCTRL_NOMADIK && ARCH_U8500
-config PINCTRL_PXA168
- bool "PXA168 pin controller driver"
- depends on ARCH_MMP
- select PINCTRL_PXA3xx
-
-config PINCTRL_PXA910
- bool "PXA910 pin controller driver"
- depends on ARCH_MMP
- select PINCTRL_PXA3xx
-
config PINCTRL_SINGLE
tristate "One-register-per-pin type device tree based pinctrl driver"
depends on OF
select PINMUX
select PINCONF
+ select GENERIC_PINCONF
help
This selects the device tree based generic pinctrl driver.
select PINMUX
select PINCONF
+config PINCTRL_S3C64XX
+ bool "Samsung S3C64XX SoC pinctrl driver"
+ depends on ARCH_S3C64XX
+ select PINCTRL_SAMSUNG
+
source "drivers/pinctrl/mvebu/Kconfig"
source "drivers/pinctrl/sh-pfc/Kconfig"
source "drivers/pinctrl/spear/Kconfig"
obj-$(CONFIG_PINCTRL_IMX51) += pinctrl-imx51.o
obj-$(CONFIG_PINCTRL_IMX53) += pinctrl-imx53.o
obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6q.o
-obj-$(CONFIG_PINCTRL_PXA3xx) += pinctrl-pxa3xx.o
+ obj-$(CONFIG_PINCTRL_IMX6Q) += pinctrl-imx6dl.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
-obj-$(CONFIG_PINCTRL_MMP2) += pinctrl-mmp2.o
obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o
-obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o
-obj-$(CONFIG_PINCTRL_PXA910) += pinctrl-pxa910.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_SIRF) += pinctrl-sirf.o
obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o
obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
obj-$(CONFIG_PINCTRL_EXYNOS) += pinctrl-exynos.o
obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinctrl-exynos5440.o
+obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
const struct imx_pinctrl_soc_info *info;
};
- static const struct imx_pin_reg *imx_find_pin_reg(
- const struct imx_pinctrl_soc_info *info,
- unsigned pin, bool is_mux, unsigned mux)
- {
- const struct imx_pin_reg *pin_reg = NULL;
- int i;
-
- for (i = 0; i < info->npin_regs; i++) {
- pin_reg = &info->pin_regs[i];
- if (pin_reg->pid != pin)
- continue;
- if (!is_mux)
- break;
- else if (pin_reg->mux_mode == (mux & IMX_MUX_MASK))
- break;
- }
-
- if (i == info->npin_regs) {
- dev_err(info->dev, "Pin(%s): unable to find pin reg map\n",
- info->pins[pin].name);
- return NULL;
- }
-
- return pin_reg;
- }
-
static const inline struct imx_pin_group *imx_pinctrl_find_group_by_name(
const struct imx_pinctrl_soc_info *info,
const char *name)
kfree(map);
}
-static struct pinctrl_ops imx_pctrl_ops = {
+static const struct pinctrl_ops imx_pctrl_ops = {
.get_groups_count = imx_get_groups_count,
.get_group_name = imx_get_group_name,
.get_group_pins = imx_get_group_pins,
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
const struct imx_pinctrl_soc_info *info = ipctl->info;
const struct imx_pin_reg *pin_reg;
- const unsigned *pins, *mux;
+ const unsigned *pins, *mux, *input_val;
+ u16 *input_reg;
unsigned int npins, pin_id;
int i;
pins = info->groups[group].pins;
npins = info->groups[group].npins;
mux = info->groups[group].mux_mode;
+ input_val = info->groups[group].input_val;
+ input_reg = info->groups[group].input_reg;
- WARN_ON(!pins || !npins || !mux);
+ WARN_ON(!pins || !npins || !mux || !input_val || !input_reg);
dev_dbg(ipctl->dev, "enable function %s group %s\n",
info->functions[selector].name, info->groups[group].name);
for (i = 0; i < npins; i++) {
pin_id = pins[i];
-
- pin_reg = imx_find_pin_reg(info, pin_id, 1, mux[i]);
- if (!pin_reg)
- return -EINVAL;
+ pin_reg = &info->pin_regs[pin_id];
if (!pin_reg->mux_reg) {
dev_err(ipctl->dev, "Pin(%s) does not support mux function\n",
pin_reg->mux_reg, mux[i]);
/* some pins also need select input setting, set it if found */
- if (pin_reg->input_reg) {
- writel(pin_reg->input_val, ipctl->base + pin_reg->input_reg);
+ if (input_reg[i]) {
+ writel(input_val[i], ipctl->base + input_reg[i]);
dev_dbg(ipctl->dev,
"==>select_input: offset 0x%x val 0x%x\n",
- pin_reg->input_reg, pin_reg->input_val);
+ input_reg[i], input_val[i]);
}
}
return 0;
}
-static struct pinmux_ops imx_pmx_ops = {
+static const struct pinmux_ops imx_pmx_ops = {
.get_functions_count = imx_pmx_get_funcs_count,
.get_function_name = imx_pmx_get_func_name,
.get_function_groups = imx_pmx_get_groups,
{
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
const struct imx_pinctrl_soc_info *info = ipctl->info;
- const struct imx_pin_reg *pin_reg;
-
- pin_reg = imx_find_pin_reg(info, pin_id, 0, 0);
- if (!pin_reg)
- return -EINVAL;
+ const struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id];
if (!pin_reg->conf_reg) {
dev_err(info->dev, "Pin(%s) does not support config function\n",
{
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
const struct imx_pinctrl_soc_info *info = ipctl->info;
- const struct imx_pin_reg *pin_reg;
-
- pin_reg = imx_find_pin_reg(info, pin_id, 0, 0);
- if (!pin_reg)
- return -EINVAL;
+ const struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id];
if (!pin_reg->conf_reg) {
dev_err(info->dev, "Pin(%s) does not support config function\n",
{
struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev);
const struct imx_pinctrl_soc_info *info = ipctl->info;
- const struct imx_pin_reg *pin_reg;
+ const struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id];
unsigned long config;
- pin_reg = imx_find_pin_reg(info, pin_id, 0, 0);
if (!pin_reg || !pin_reg->conf_reg) {
seq_printf(s, "N/A");
return;
}
}
-static struct pinconf_ops imx_pinconf_ops = {
+static const struct pinconf_ops imx_pinconf_ops = {
.pin_config_get = imx_pinconf_get,
.pin_config_set = imx_pinconf_set,
.pin_config_dbg_show = imx_pinconf_dbg_show,
.owner = THIS_MODULE,
};
- /* decode pin id and mux from pin function id got from device tree*/
- static int imx_pinctrl_get_pin_id_and_mux(const struct imx_pinctrl_soc_info *info,
- unsigned int pin_func_id, unsigned int *pin_id,
- unsigned int *mux)
- {
- if (pin_func_id > info->npin_regs)
- return -EINVAL;
-
- *pin_id = info->pin_regs[pin_func_id].pid;
- *mux = info->pin_regs[pin_func_id].mux_mode;
-
- return 0;
- }
+ /*
+ * Each pin represented in fsl,pins consists of 5 u32 PIN_FUNC_ID and
+ * 1 u32 CONFIG, so 24 types in total for each pin.
+ */
+ #define FSL_PIN_SIZE 24
static int imx_pinctrl_parse_groups(struct device_node *np,
struct imx_pin_group *grp,
struct imx_pinctrl_soc_info *info,
u32 index)
{
- unsigned int pin_func_id;
- int ret, size;
+ int size;
const __be32 *list;
- int i, j;
+ int i;
u32 config;
dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
*/
list = of_get_property(np, "fsl,pins", &size);
/* we do not check return since it's safe node passed down */
- size /= sizeof(*list);
- if (!size || size % 2) {
- dev_err(info->dev, "wrong pins number or pins and configs should be pairs\n");
+ if (!size || size % FSL_PIN_SIZE) {
+ dev_err(info->dev, "Invalid fsl,pins property\n");
return -EINVAL;
}
- grp->npins = size / 2;
+ grp->npins = size / FSL_PIN_SIZE;
grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
GFP_KERNEL);
grp->mux_mode = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
GFP_KERNEL);
+ grp->input_reg = devm_kzalloc(info->dev, grp->npins * sizeof(u16),
+ GFP_KERNEL);
+ grp->input_val = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
+ GFP_KERNEL);
grp->configs = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned long),
GFP_KERNEL);
- for (i = 0, j = 0; i < size; i += 2, j++) {
- pin_func_id = be32_to_cpu(*list++);
- ret = imx_pinctrl_get_pin_id_and_mux(info, pin_func_id,
- &grp->pins[j], &grp->mux_mode[j]);
- if (ret) {
- dev_err(info->dev, "get invalid pin function id\n");
- return -EINVAL;
- }
+ for (i = 0; i < grp->npins; i++) {
+ u32 mux_reg = be32_to_cpu(*list++);
+ u32 conf_reg = be32_to_cpu(*list++);
+ unsigned int pin_id = mux_reg ? mux_reg / 4 : conf_reg / 4;
+ struct imx_pin_reg *pin_reg = &info->pin_regs[pin_id];
+
+ grp->pins[i] = pin_id;
+ pin_reg->mux_reg = mux_reg;
+ pin_reg->conf_reg = conf_reg;
+ grp->input_reg[i] = be32_to_cpu(*list++);
+ grp->mux_mode[i] = be32_to_cpu(*list++);
+ grp->input_val[i] = be32_to_cpu(*list++);
+
/* SION bit is in mux register */
config = be32_to_cpu(*list++);
if (config & IMX_PAD_SION)
- grp->mux_mode[j] |= IOMUXC_CONFIG_SION;
- grp->configs[j] = config & ~IMX_PAD_SION;
+ grp->mux_mode[i] |= IOMUXC_CONFIG_SION;
+ grp->configs[i] = config & ~IMX_PAD_SION;
}
#ifdef DEBUG
struct resource *res;
int ret;
- if (!info || !info->pins || !info->npins
- || !info->pin_regs || !info->npin_regs) {
+ if (!info || !info->pins || !info->npins) {
dev_err(&pdev->dev, "wrong pinctrl info\n");
return -EINVAL;
}
if (!ipctl)
return -ENOMEM;
+ info->pin_regs = devm_kzalloc(&pdev->dev, sizeof(*info->pin_regs) *
+ info->npins, GFP_KERNEL);
+ if (!info->pin_regs)
+ return -ENOMEM;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENOENT;