L: linux-scsi@vger.kernel.org
S: Maintained
F: drivers/scsi/aic7xxx/
-F: drivers/scsi/aic7xxx_old/
AIMSLAB FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h
+AMD CRYPTOGRAPHIC COPROCESSOR (CCP) DRIVER
+M: Tom Lendacky <thomas.lendacky@amd.com>
+L: linux-crypto@vger.kernel.org
+S: Supported
+F: drivers/crypto/ccp/
+F: include/linux/ccp.h
+
AMD FAM15H PROCESSOR POWER MONITORING DRIVER
M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: lm-sensors@lm-sensors.org
M: Maxime Ripard <maxime.ripard@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
- F: arch/arm/mach-sunxi/
+ N: sun[x4567]i
+
+ ARM/Allwinner SoC Clock Support
+ M: Emilio López <emilio@elopez.com.ar>
+ S: Maintained
+ F: drivers/clk/sunxi/
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
M: Andrew Victor <linux@maxim.org.za>
F: arch/arm/boot/dts/sama*.dtsi
ARM/CALXEDA HIGHBANK ARCHITECTURE
-M: Rob Herring <rob.herring@calxeda.com>
+M: Rob Herring <robh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-highbank/
F: arch/arm/mach-ebsa110/
F: drivers/net/ethernet/amd/am79c961a.*
+ ARM/ENERGY MICRO (SILICON LABS) EFM32 SUPPORT
+ M: Uwe Kleine-König <kernel@pengutronix.de>
+ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+ S: Maintained
+ N: efm32
+
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
M: Daniel Ribeiro <drwyrm@gmail.com>
M: Stefan Schmidt <stefan@openezx.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
+F: drivers/clk/keystone/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
ARM/LOGICPD PXA270 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
S: Maintained
F: arch/arm/mach-mvebu/
+ ARM/Marvell Berlin SoC support
+ M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+ S: Maintained
+ F: arch/arm/mach-berlin/
+
ARM/Marvell Dove/Kirkwood/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
S: Supported
F: arch/arm/mach-zynq/
F: drivers/cpuidle/cpuidle-zynq.c
+N: zynq
+N: xilinx
+F: drivers/clocksource/cadence_ttc_timer.c
ARM SMMU DRIVER
M: Will Deacon <will.deacon@arm.com>
F: drivers/scsi/esas2r
AUDIT SUBSYSTEM
-M: Al Viro <viro@zeniv.linux.org.uk>
M: Eric Paris <eparis@redhat.com>
L: linux-audit@redhat.com (subscribers-only)
W: http://people.redhat.com/sgrubb/audit/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
+T: git git://git.infradead.org/users/eparis/audit.git
S: Maintained
F: include/linux/audit.h
F: include/uapi/linux/audit.h
F: drivers/platform/x86/dell-laptop.c
DELL LAPTOP SMM DRIVER
-S: Orphan
+M: Guenter Roeck <linux@roeck-us.net>
F: drivers/char/i8k.c
F: include/uapi/linux/i8k.h
M: Paul Zimmerman <paulz@synopsys.com>
L: linux-usb@vger.kernel.org
S: Maintained
-F: drivers/staging/dwc2/
+F: drivers/usb/dwc2/
DESIGNWARE USB3 DRD IP DRIVER
M: Felipe Balbi <balbi@ti.com>
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Daniel Vetter <daniel.vetter@ffwll.ch>
+M: Jani Nikula <jani.nikula@linux.intel.com>
L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
+Q: http://patchwork.freedesktop.org/project/intel-gfx/
T: git git://people.freedesktop.org/~danvet/drm-intel
S: Supported
F: drivers/gpu/drm/i915/
M: MyungJoo Ham <myungjoo.ham@samsung.com>
M: Chanwoo Choi <cw00.choi@samsung.com>
L: linux-kernel@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git
S: Maintained
F: drivers/extcon/
F: Documentation/extcon/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs.git
S: Maintained
F: Documentation/filesystems/f2fs.txt
+F: Documentation/ABI/testing/sysfs-fs-f2fs
F: fs/f2fs/
F: include/linux/f2fs_fs.h
GPIO SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
-S: Maintained
+M: Alexandre Courbot <gnurou@gmail.com>
L: linux-gpio@vger.kernel.org
-F: Documentation/gpio.txt
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
+S: Maintained
+F: Documentation/gpio/
F: drivers/gpio/
F: include/linux/gpio*
F: include/asm-generic/gpio.h
S: Maintained
F: drivers/media/usb/gspca/
+GUID PARTITION TABLE (GPT)
+M: Davidlohr Bueso <davidlohr@hp.com>
+L: linux-efi@vger.kernel.org
+S: Maintained
+F: block/partitions/efi.*
+
STK1160 USB VIDEO CAPTURE DRIVER
M: Ezequiel Garcia <elezegarcia@gmail.com>
L: linux-media@vger.kernel.org
F: include/uapi/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
-M: Gleb Natapov <gleb@redhat.com>
+M: Gleb Natapov <gleb@kernel.org>
M: Paolo Bonzini <pbonzini@redhat.com>
L: kvm@vger.kernel.org
W: http://www.linux-kvm.org
F: include/linux/lguest*.h
F: tools/lguest/
+LIBLOCKDEP
+M: Sasha Levin <sasha.levin@oracle.com>
+S: Maintained
+F: tools/lib/lockdep/
+
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras <paulus@au.ibm.com>
W: http://www.ibm.com/linux/ltc/projects/ppc
M: Herbert Xu <herbert@gondor.apana.org.au>
M: "David S. Miller" <davem@davemloft.net>
L: netdev@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git
S: Maintained
F: net/xfrm/
F: net/key/
F: net/ipv4/xfrm*
+F: net/ipv4/esp4.c
+F: net/ipv4/ah4.c
+F: net/ipv4/ipcomp.c
+F: net/ipv4/ip_vti.c
F: net/ipv6/xfrm*
+F: net/ipv6/esp6.c
+F: net/ipv6/ah6.c
+F: net/ipv6/ipcomp6.c
+F: net/ipv6/ip6_vti.c
F: include/uapi/linux/xfrm.h
F: include/net/xfrm.h
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Grant Likely <grant.likely@linaro.org>
-M: Rob Herring <rob.herring@calxeda.com>
+M: Rob Herring <robh+dt@kernel.org>
L: devicetree@vger.kernel.org
W: http://fdt.secretlab.ca
T: git git://git.secretlab.ca/git/linux-2.6.git
K: of_match_table
OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
-M: Rob Herring <rob.herring@calxeda.com>
+M: Rob Herring <robh+dt@kernel.org>
M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
M: Ian Campbell <ijc+devicetree@hellion.org.uk>
F: kernel/*timer*
POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-M: Anton Vorontsov <anton@enomsg.org>
+M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: David Woodhouse <dwmw2@infradead.org>
T: git git://git.infradead.org/battery-2.6.git
S: Maintained
F: drivers/scsi/qla1280.[ch]
QLOGIC QLA2XXX FC-SCSI DRIVER
-M: Andrew Vasquez <andrew.vasquez@qlogic.com>
-M: linux-driver@qlogic.com
+M: qla2xxx-upstream@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/LICENSE.qla2xxx
F: Documentation/RCU/torture.txt
F: kernel/rcu/torture.c
+RCUTORTURE TEST FRAMEWORK
+M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
+S: Supported
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git
+F: tools/testing/selftests/rcutorture
+
RDC R-321X SoC
M: Florian Fainelli <florian@openwrt.org>
S: Maintained
SCSI SG DRIVER
M: Doug Gilbert <dgilbert@interlog.com>
L: linux-scsi@vger.kernel.org
-W: http://www.torque.net/sg
+W: http://sg.danny.cz/sg
S: Maintained
+F: Documentation/scsi/scsi-generic.txt
F: drivers/scsi/sg.c
F: include/scsi/sg.h
F: drivers/media/usb/tm6000/
TPM DEVICE DRIVER
-M: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
-M: Ashley Lai <ashley@ashleylai.com>
M: Peter Huewe <peterhuewe@gmx.de>
-M: Rajiv Andrade <mail@srajiv.net>
-W: http://tpmdd.sourceforge.net
+M: Ashley Lai <ashley@ashleylai.com>
M: Marcel Selhorst <tpmdd@selhorst.net>
-M: Sirrix AG <tpmdd@sirrix.com>
-W: http://www.sirrix.com
+W: http://tpmdd.sourceforge.net
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
F: drivers/char/tpm/
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
+L: virtio-dev@lists.oasis-open.org
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/char/virtio_console.c
VIRTIO CORE, NET AND BLOCK DRIVERS
M: Rusty Russell <rusty@rustcorp.com.au>
M: "Michael S. Tsirkin" <mst@redhat.com>
+L: virtio-dev@lists.oasis-open.org
L: virtualization@lists.linux-foundation.org
S: Maintained
F: drivers/virtio/
VIRTIO HOST (VHOST)
M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org
+L: virtio-dev@lists.oasis-open.org
L: virtualization@lists.linux-foundation.org
L: netdev@vger.kernel.org
S: Maintained
M: Boris Ostrovsky <boris.ostrovsky@oracle.com>
M: David Vrabel <david.vrabel@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git
S: Supported
F: arch/x86/xen/
F: drivers/*/xen-*front.c
XFS FILESYSTEM
P: Silicon Graphics Inc
-M: Dave Chinner <dchinner@fromorbit.com>
+M: Dave Chinner <david@fromorbit.com>
M: Ben Myers <bpm@sgi.com>
M: xfs@oss.sgi.com
L: xfs@oss.sgi.com
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_IPC_PARSE_VERSION
select BUILDTIME_EXTABLE_SORT if MMU
select CLONE_BACKWARDS
select CPU_PM if (SUSPEND || CPU_IDLE)
- select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU
+ select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_IDLE_POLL_SETUP
select HAVE_BPF_JIT
select HAVE_CONTEXT_TRACKING
select HAVE_C_RECORDMCOUNT
+ select HAVE_CC_STACKPROTECTOR
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select IRQ_FORCED_THREADING
select KTIME_SCALAR
select MODULES_USE_ELF_REL
+ select NO_BOOTMEM
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PERF_USE_VMALLOC
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
+ config ARCH_EFM32
+ bool "Energy Micro efm32"
+ depends on !MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_NVIC
+ # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
+ # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
+ select CLKSRC_MMIO
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select NO_DMA
+ select NO_IOPORT
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+ processors.
+
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
- config ARCH_MSM
+ config ARCH_MSM_NODT
bool "Qualcomm MSM"
+ select ARCH_MSM
select ARCH_REQUIRE_GPIOLIB
- select CLKSRC_OF if OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
help
stack and controls some vital subsystems
(clock and power control, etc).
- config ARCH_SHMOBILE
- bool "Renesas SH-Mobile / R-Mobile"
+ config ARCH_SHMOBILE_LEGACY
+ bool "Renesas SH-Mobile / R-Mobile (non-multiplatform)"
+ select ARCH_SHMOBILE
select ARM_PATCH_PHYS_VIRT
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
select PM_GENERIC_DOMAINS if PM
select SPARSE_IRQ
help
- Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
+ Support for Renesas's SH-Mobile and R-Mobile ARM platforms using
+ a non-multiplatform kernel.
config ARCH_RPC
bool "RiscPC"
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
select MULTI_IRQ_HANDLER
- select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
select SAMSUNG_ATAGS
help
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK
- select CPU_V6
+ select CPU_V6K
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_TCM
- select NEED_MACH_GPIO_H
select NO_IOPORT
select PLAT_SAMSUNG
select PM_GENERIC_DOMAINS
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
- select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI
source "arch/arm/mach-bcm2835/Kconfig"
+ source "arch/arm/mach-berlin/Kconfig"
+
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-cns3xxx/Kconfig"
source "arch/arm/mach-highbank/Kconfig"
+ source "arch/arm/mach-hisi/Kconfig"
+
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-iop32x/Kconfig"
source "arch/arm/mach-msm/Kconfig"
+ source "arch/arm/mach-moxart/Kconfig"
+
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-imx/Kconfig"
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX
+ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX
default 392 if ARCH_U8500
default 352 if ARCH_VT8500
default 288 if ARCH_SUNXI
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
ARCH_S5PV210 || ARCH_EXYNOS4
default AT91_TIMER_HZ if ARCH_AT91
- default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
+ default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
config SCHED_HRTICK
def_bool HIGH_RES_TIMERS
-config SCHED_HRTICK
- def_bool HIGH_RES_TIMERS
-
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE
- range 11 64 if ARCH_SHMOBILE
+ int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
+ range 11 64 if ARCH_SHMOBILE_LEGACY
default "12" if SOC_AM33XX
- default "9" if SA1111
+ default "9" if SA1111 || ARCH_EFM32
default "11"
help
The kernel memory allocator divides physically contiguous memory
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
-config CC_STACKPROTECTOR
- bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
- help
- This option turns on the -fstack-protector GCC feature. This
- feature puts, at the beginning of functions, a canary value on
- the stack just before the return address, and validates
- the value just before actually returning. Stack based buffer
- overflows (that need to overwrite this return address) now also
- overwrite the canary, which gets detected and the attack is then
- neutralized via a kernel panic.
- This feature requires gcc version 4.2 or above.
-
config SWIOTLB
def_bool y
config ZBOOT_ROM
bool "Compressed boot loader in ROM/flash"
depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
+ depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
help
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
config ARM_APPENDED_DTB
bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
- depends on OF && !ZBOOT_ROM
+ depends on OF
help
With this option, the boot code will look for a device tree binary
(DTB) appended to zImage
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
- depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM
+ depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
config AUTO_ZRELADDR
bool "Auto calculation of the decompressed kernel image address"
- depends on !ZBOOT_ROM
help
ZRELADDR is the physical address where the decompressed kernel
image will be placed. If AUTO_ZRELADDR is selected, the address
source "lib/Kconfig.debug"
+config ARM_PTDUMP
+ bool "Export kernel pagetable layout to userspace via debugfs"
+ depends on DEBUG_KERNEL
+ select DEBUG_FS
+ ---help---
+ Say Y here if you want to show the kernel pagetable layout in a
+ debugfs file. This information is only useful for kernel developers
+ who are working in architecture specific areas of the kernel.
+ It is probably not a good idea to enable this feature in a production
+ kernel.
+ If in doubt, say "N"
+
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU
depends on ARCH_BCM2835
select DEBUG_UART_PL01X
+ config DEBUG_BCM_KONA_UART
+ bool "Kernel low-level debugging messages via BCM KONA UART"
+ depends on ARCH_BCM
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Broadcom SoC platforms.
+ This low level debug works for Broadcom
+ mobile SoCs in the Kona family of chips (e.g. bcm28155,
+ bcm11351, etc...)
+
+ config DEBUG_BERLIN_UART
+ bool "Marvell Berlin SoC Debug UART"
+ depends on ARCH_BERLIN
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Marvell Berlin SoC based platforms.
+
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
Say Y here if you want kernel low-level debugging support
on i.MX35.
+ config DEBUG_IMX50_UART
+ bool "i.MX50 Debug UART"
+ depends on SOC_IMX50
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX50.
+
config DEBUG_IMX51_UART
bool "i.MX51 Debug UART"
depends on SOC_IMX51
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
+ DEBUG_IMX50_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
+ DEBUG_IMX50_UART || \
DEBUG_IMX51_UART || \
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
default 0x20201000 if DEBUG_BCM2835
+ default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
default 0x40090000 if ARCH_LPC32XX
default 0x40100000 if DEBUG_PXA_UART1
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
ARCH_ORION5X
+ default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8b00000 if DEBUG_HI3716_UART
default 0xfcb00000 if DEBUG_HI3620_UART
default 0xfe800000 if ARCH_IOP32X
default 0xf2100000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
+ default 0xf7fc9000 if DEBUG_BERLIN_UART
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
default 0xfe230000 if DEBUG_PICOXCELL_UART
+ default 0xfe300000 if DEBUG_BCM_KONA_UART
default 0xfe800000 if ARCH_IOP32X
default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART
default 0xfeb24000 if DEBUG_RK3X_UART0
default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
ARCH_KEYSTONE || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
- DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1
+ DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \
+ DEBUG_BCM_KONA_UART
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
additional instructions during context switch. Say Y here only if you
are planning to use hardware trace tools with this kernel.
+config DEBUG_SET_MODULE_RONX
+ bool "Set loadable kernel module data as NX and text as RO"
+ depends on MODULES
+ ---help---
+ This option helps catch unintended modifications to loadable
+ kernel module's text and read-only data. It also prevents execution
+ of module data. Such protection may interfere with run-time code
+ patching and dynamic kernel tracing - and they might also protect
+ against certain classes of kernel exploits.
+ If in doubt, say "N".
+
endmenu
KBUILD_CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
endif
-ifeq ($(CONFIG_CC_STACKPROTECTOR),y)
-KBUILD_CFLAGS +=-fstack-protector
-endif
-
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
KBUILD_CPPFLAGS += -mbig-endian
AS += -EB
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM) += bcm
machine-$(CONFIG_ARCH_BCM2835) += bcm2835
+ machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
+ machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
machine-$(CONFIG_ARCH_GEMINI) += gemini
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
+ machine-$(CONFIG_ARCH_HI3xxx) += hisi
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
machine-$(CONFIG_ARCH_IOP32X) += iop32x
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
+ machine-$(CONFIG_ARCH_MOXART) += moxart
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
- machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
endif
endif
- ifeq ($(CONFIG_ARCH_SHMOBILE),y)
+ ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
OBJS += head-shmobile.o
endif
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \
- font.o font.c head.o misc.o $(OBJS)
+ lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
+ bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
- lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \
+ lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
hyp-stub.S
ifeq ($(CONFIG_FUNCTION_TRACER),y)
$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
$(call cmd,shipped)
+# For __bswapsi2, __bswapdi2
+bswapsdi2 = $(obj)/bswapsdi2.o
+
+$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
+ $(call cmd,shipped)
+
# We need to prevent any GOTOFF relocs being used with references
# to symbols in the .bss section since we cannot relocate them
# independently from the rest at run time. This can be achieved by
fi
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
- $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE
+ $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
+ $(bswapsdi2) FORCE
@$(check_for_multiple_zreladdr)
$(call if_changed,ld)
@$(check_for_bad_syms)
dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
# sam9260
dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
+dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb
dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \
bcm28155-ap.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
+ dtb-$(CONFIG_ARCH_BERLIN) += \
+ berlin2-sony-nsz-gs7.dtb \
+ berlin2cd-google-chromecast.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
+ dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos5420-smdk5420.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb
+ dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
- dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
CONFIG_ARM_THUMBEE=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
- # CONFIG_OABI_COMPAT is not set
# CONFIG_COMPACTION is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
- CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M"
CONFIG_CPU_IDLE=y
CONFIG_VFP=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
# CONFIG_FTRACE is not set
+ # CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_XZ_DEC=y
CONFIG_AVERAGE=y
+CONFIG_PINCTRL_CAPRI=y
if ARCH_AT91
+config HAVE_AT91_UTMI
+ bool
+
+config HAVE_AT91_USB_CLK
+ bool
+
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
+config AT91_USE_OLD_CLK
+ bool
+
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
+config COMMON_CLK_AT91
+ bool
+ default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
+ select COMMON_CLK
+
+config OLD_CLK_AT91
+ bool
+ default AT91_PMC_UNIT && AT91_USE_OLD_CLK
+
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
config AT91_SAM9_TIME
bool
+config HAVE_AT91_SMD
+ bool
+
config SOC_AT91SAM9
bool
select AT91_SAM9_TIME
if SOC_SAM_V7
config SOC_SAMA5D3
bool "SAMA5D3 family"
- depends on SOC_SAM_V7
select SOC_SAMA5
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU1
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_SMD
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's SAMA5D3 family SoC.
- This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35.
+ This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
endif
if SOC_SAM_V4_V5
select HAVE_AT91_DBGU0
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
select HAVE_AT91_DBGU0
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
config SOC_AT91SAM9RL
bool "AT91SAM9RL"
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_UTMI
config SOC_AT91SAM9G45
bool "AT91SAM9G45 or AT91SAM9M10 families"
select HAVE_AT91_DBGU1
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_UTMI
+ select HAVE_AT91_SMD
+ select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
+ select AT91_USE_OLD_CLK
+ select HAVE_AT91_USB_CLK
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
comment "AT91 Feature Selections"
-config AT91_PROGRAMMABLE_CLOCKS
- bool "Programmable Clocks"
- help
- Select this if you need to program one or more of the PCK0..PCK3
- programmable clock outputs.
-
config AT91_SLOW_CLOCK
bool "Suspend-to-RAM disables main oscillator"
depends on SUSPEND
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
+#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
#include "at91_shdwc.h"
#include "soc.h"
desc->pfn = __phys_to_pfn(base);
desc->length = length;
- desc->type = MT_MEMORY_NONCACHED;
+ desc->type = MT_MEMORY_RWX_NONCACHED;
pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n",
base, length, desc->virtual);
case ARCH_EXID_SAMA5D35:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
break;
+ case ARCH_EXID_SAMA5D36:
+ at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
+ break;
}
}
}
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
+ [AT91_SOC_SAMA5D36] = "sama5d36",
[AT91_SOC_SUBTYPE_NONE] = "None",
[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
at91_dt_clock_init();
/* Register the processor-specific clocks */
- at91_boot_soc.register_clocks();
+ if (at91_boot_soc.register_clocks)
+ at91_boot_soc.register_clocks();
at91_boot_soc.init();
}
at91_dt_clock_init();
/* Register the processor-specific clocks */
- at91_boot_soc.register_clocks();
+ if (at91_boot_soc.register_clocks)
+ at91_boot_soc.register_clocks();
if (at91_boot_soc.init)
at91_boot_soc.init();
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR if !ZBOOT_ROM
select CLKSRC_MMIO
select COMMON_CLK
select GENERIC_ALLOCATOR
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
+ select PINCTRL
select SOC_BUS
select SPARSE_IRQ
select USE_OF
menu "Freescale i.MX support"
depends on ARCH_MXC
- config MXC_IRQ_PRIOR
- bool "Use IRQ priority"
- help
- Select this if you want to use prioritized IRQ handling.
- This feature prevents higher priority ISR to be interrupted
- by lower priority IRQ.
- This may be useful in embedded applications, where are strong
- requirements for timing.
- Say N here, unless you have a specialized requirement.
-
config MXC_TZIC
bool
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
+ select PINCTRL_IMX25
config SOC_IMX27
bool
select IMX_HAVE_IOMUX_V1
select MACH_MX27
select MXC_AVIC
+ select PINCTRL_IMX27
config SOC_IMX31
bool
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
+ select PINCTRL
config SOC_IMX5
bool
config SOC_IMX51
bool
select HAVE_IMX_SRC
- select PINCTRL
select PINCTRL_IMX51
select SOC_IMX5
comment "MX35 platforms:"
+ config MACH_IMX35_DT
+ bool "Support i.MX35 platforms from device tree"
+ select SOC_IMX35
+ help
+ Include support for Freescale i.MX35 based platforms
+ using the device tree for discovery.
+
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select IMX_HAVE_PLATFORM_FLEXCAN
comment "Device tree only"
+ config SOC_IMX50
+ bool "i.MX50 support"
+ select HAVE_IMX_SRC
+ select PINCTRL_IMX50
+ select SOC_IMX5
+
+ help
+ This enables support for Freescale i.MX50 processor.
+
config SOC_IMX53
bool "i.MX53 support"
select HAVE_IMX_SRC
select IMX_HAVE_PLATFORM_IMX2_WDT
- select PINCTRL
select PINCTRL_IMX53
select SOC_IMX5
select MFD_SYSCON
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
- select PINCTRL
select PINCTRL_IMX6Q
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
select MFD_SYSCON
- select PINCTRL
select PINCTRL_IMX6SL
select PL310_ERRATA_588369 if CACHE_PL310
select PL310_ERRATA_727915 if CACHE_PL310
select CPU_V7
select ARM_GIC
select CLKSRC_OF
- select PINCTRL
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_588369 if CACHE_PL310
/*
* sched_clock()
*/
- static u32 notrace ixp4xx_read_sched_clock(void)
+ static u64 notrace ixp4xx_read_sched_clock(void)
{
return *IXP4XX_OSTS;
}
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
- setup_sched_clock(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
+ sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
ixp4xx_clocksource_read);
void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
{
- if ( 1 && mode == REBOOT_SOFT) {
+ if (mode == REBOOT_SOFT) {
/* Jump into ROM at address 0 */
soft_restart(0);
} else {
* calls to sched_clock() which should always be the case in practice.
*/
- static u32 notrace pxa_read_sched_clock(void)
+ static u64 notrace pxa_read_sched_clock(void)
{
return readl_relaxed(OSCR);
}
static struct irqaction pxa_ost0_irq = {
.name = "ost0",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = pxa_ost0_interrupt,
.dev_id = &ckevt_pxa_osmr0,
};
writel_relaxed(0, OIER);
writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
- setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
+ sched_clock_register(pxa_read_sched_clock, 32, clock_tick_rate);
ckevt_pxa_osmr0.cpumask = cpumask_of(0);
#include <linux/mmc/sh_mmcif.h>
#include <linux/mtd/partitions.h>
#include <linux/pinctrl/machine.h>
+ #include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/usb-rcar-phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
.id = i,
.data = &rsnd_card_info[i],
.size_data = sizeof(struct asoc_simple_card_info),
- .dma_mask = ~0,
+ .dma_mask = DMA_BIT_MASK(32),
};
platform_device_register_full(&cardinfo);
#define FRQCR2 0xfcfe0014
#define STBCR3 0xfcfe0420
#define STBCR4 0xfcfe0424
+ #define STBCR9 0xfcfe0438
#define PLL_RATE 30
| CLK_ENABLE_ON_INIT),
};
- enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
+ enum { MSTP97, MSTP96, MSTP95, MSTP94,
+ MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
MSTP33, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
+ [MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
+ [MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
+ [MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
/* MSTP clocks */
+ CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
+
+ /* ICK */
CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
#define SMSTPCR7 0xe615014c
#define SMSTPCR8 0xe6150990
#define SMSTPCR9 0xe6150994
+ #define SMSTPCR10 0xe6150998
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
};
static struct clk main_clk = {
- /* .parent will be set r8a73a4_clock_init */
+ /* .parent will be set r8a7790_clock_init */
.ops = &followparent_clk_ops,
};
/* MSTP */
enum {
+ MSTP1015, MSTP1014, MSTP1013, MSTP1012, MSTP1011, MSTP1010,
+ MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
MSTP931, MSTP930, MSTP929, MSTP928,
+ MSTP917,
MSTP813,
MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
MSTP717, MSTP716,
+ MSTP704,
MSTP522,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
};
static struct clk mstp_clks[MSTP_NR] = {
- [MSTP931] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 31, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 30, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 29, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32(&hp_clk, SMSTPCR9, 28, 0), /* I2C3 */
+ [MSTP1015] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 15, 0), /* SSI0 */
+ [MSTP1014] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 14, 0), /* SSI1 */
+ [MSTP1013] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 13, 0), /* SSI2 */
+ [MSTP1012] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 12, 0), /* SSI3 */
+ [MSTP1011] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 11, 0), /* SSI4 */
+ [MSTP1010] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 10, 0), /* SSI5 */
+ [MSTP1009] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 9, 0), /* SSI6 */
+ [MSTP1008] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 8, 0), /* SSI7 */
+ [MSTP1007] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 7, 0), /* SSI8 */
+ [MSTP1006] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 6, 0), /* SSI9 */
+ [MSTP1005] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 5, 0), /* SSI ALL */
+ [MSTP931] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 31, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 30, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 29, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 28, 0), /* I2C3 */
+ [MSTP917] = SH_CLK_MSTP32(&qspi_clk, SMSTPCR9, 17, 0), /* QSPI */
[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
[MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+ [MSTP704] = SH_CLK_MSTP32(&mp_clk, SMSTPCR7, 4, 0), /* HSUSB */
[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
CLKDEV_CON_ID("ssprs", &div6_clks[DIV6_SSPRS]),
/* MSTP */
- CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
- CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
- CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
- CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
- CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+ CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP1005]),
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
+ CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
+ CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
+ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+
+ /* ICK */
+ CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
+ CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]),
+ CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]),
+ CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
+ CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
+ CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+ CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
+ CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
+ CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
+ CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP1012]),
+ CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP1011]),
+ CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP1010]),
+ CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP1009]),
+ CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP1008]),
+ CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP1007]),
+ CLKDEV_ICK_ID("ssi.9", "rcar_sound", &mstp_clks[MSTP1006]),
+
};
#define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
R8A7790_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
break;
case MD(14):
- R8A7790_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
+ R8A7790_CLOCK_ROOT(26 / 2, &extal_div2_clk, 200, 240, 122, 102);
break;
case MD(13) | MD(14):
- R8A7790_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
+ R8A7790_CLOCK_ROOT(30 / 2, &extal_div2_clk, 172, 208, 106, 88);
break;
}
CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]),
CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]),
CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]),
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
- CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
- CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
- CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
+ CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */
CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+
+ /* ICK */
+ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
+ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+ CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+ CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
};
void __init sh73a0_clock_init(void)
ARRAY_SIZE(r8a7779_pinctrl_devices));
}
- static struct plat_sci_port scif0_platform_data = {
- .mapbase = 0xffe40000,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
- .scbrr_algo_id = SCBRR_ALGO_2,
- .type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_iid(0x78)),
- };
-
- static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .dev = {
- .platform_data = &scif0_platform_data,
- },
- };
-
- static struct plat_sci_port scif1_platform_data = {
- .mapbase = 0xffe41000,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
- .scbrr_algo_id = SCBRR_ALGO_2,
- .type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_iid(0x79)),
- };
-
- static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .dev = {
- .platform_data = &scif1_platform_data,
- },
- };
-
- static struct plat_sci_port scif2_platform_data = {
- .mapbase = 0xffe42000,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
- .scbrr_algo_id = SCBRR_ALGO_2,
- .type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_iid(0x7a)),
- };
-
- static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .dev = {
- .platform_data = &scif2_platform_data,
- },
- };
-
- static struct plat_sci_port scif3_platform_data = {
- .mapbase = 0xffe43000,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
- .scbrr_algo_id = SCBRR_ALGO_2,
- .type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_iid(0x7b)),
- };
-
- static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .dev = {
- .platform_data = &scif3_platform_data,
- },
- };
-
- static struct plat_sci_port scif4_platform_data = {
- .mapbase = 0xffe44000,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
- .scbrr_algo_id = SCBRR_ALGO_2,
- .type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_iid(0x7c)),
- };
-
- static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .dev = {
- .platform_data = &scif4_platform_data,
- },
- };
-
- static struct plat_sci_port scif5_platform_data = {
- .mapbase = 0xffe45000,
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
- .scbrr_algo_id = SCBRR_ALGO_2,
- .type = PORT_SCIF,
- .irqs = SCIx_IRQ_MUXED(gic_iid(0x7d)),
- };
+ /* SCIF */
+ #define R8A7779_SCIF(index, baseaddr, irq) \
+ static struct plat_sci_port scif##index##_platform_data = { \
+ .type = PORT_SCIF, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
+ .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
+ }; \
+ \
+ static struct resource scif##index##_resources[] = { \
+ DEFINE_RES_MEM(baseaddr, 0x100), \
+ DEFINE_RES_IRQ(irq), \
+ }; \
+ \
+ static struct platform_device scif##index##_device = { \
+ .name = "sh-sci", \
+ .id = index, \
+ .resource = scif##index##_resources, \
+ .num_resources = ARRAY_SIZE(scif##index##_resources), \
+ .dev = { \
+ .platform_data = &scif##index##_platform_data, \
+ }, \
+ }
- static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .dev = {
- .platform_data = &scif5_platform_data,
- },
- };
+ R8A7779_SCIF(0, 0xffe40000, gic_iid(0x78));
+ R8A7779_SCIF(1, 0xffe41000, gic_iid(0x79));
+ R8A7779_SCIF(2, 0xffe42000, gic_iid(0x7a));
+ R8A7779_SCIF(3, 0xffe43000, gic_iid(0x7b));
+ R8A7779_SCIF(4, 0xffe44000, gic_iid(0x7c));
+ R8A7779_SCIF(5, 0xffe45000, gic_iid(0x7d));
/* TMU */
static struct sh_timer_config tmu00_platform_data = {
.resource = ohci1_resources,
};
-/* Ether */
-static struct resource ether_resources[] __initdata = {
- {
- .start = 0xfde00000,
- .end = 0xfde003ff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = gic_iid(0xb4),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define R8A7779_VIN(idx) \
-static struct resource vin##idx##_resources[] __initdata = { \
- DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
- DEFINE_RES_IRQ(gic_iid(0x5f + (idx))), \
-}; \
- \
-static struct platform_device_info vin##idx##_info __initdata = { \
- .parent = &platform_bus, \
- .name = "r8a7779-vin", \
- .id = idx, \
- .res = vin##idx##_resources, \
- .num_res = ARRAY_SIZE(vin##idx##_resources), \
- .dma_mask = DMA_BIT_MASK(32), \
-}
-
-R8A7779_VIN(0);
-R8A7779_VIN(1);
-R8A7779_VIN(2);
-R8A7779_VIN(3);
-
-static struct platform_device_info *vin_info_table[] __initdata = {
- &vin0_info,
- &vin1_info,
- &vin2_info,
- &vin3_info,
-};
-
/* HPB-DMA */
/* Asynchronous mode register bits */
r8a7779_register_hpb_dmae();
}
-void __init r8a7779_add_ether_device(struct sh_eth_plat_data *pdata)
-{
- platform_device_register_resndata(&platform_bus, "r8a777x-ether", -1,
- ether_resources,
- ARRAY_SIZE(ether_resources),
- pdata, sizeof(*pdata));
-}
-
-void __init r8a7779_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
-{
- BUG_ON(id < 0 || id > 3);
-
- vin_info_table[id]->data = pdata;
- vin_info_table[id]->size_data = sizeof(*pdata);
-
- platform_device_register_full(vin_info_table[id]);
-}
-
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak r8a7779_register_twd(void) { }
DEFINE_RES_MEM(0xe6060000, 0x250),
};
+#define r8a7790_register_pfc() \
+ platform_device_register_simple("pfc-r8a7790", -1, pfc_resources, \
+ ARRAY_SIZE(pfc_resources))
+
#define R8A7790_GPIO(idx) \
static const struct resource r8a7790_gpio##idx##_resources[] __initconst = { \
DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \
&r8a7790_gpio##idx##_platform_data, \
sizeof(r8a7790_gpio##idx##_platform_data))
+ static struct resource i2c_resources[] __initdata = {
+ /* I2C0 */
+ DEFINE_RES_MEM(0xE6508000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(287)),
+ /* I2C1 */
+ DEFINE_RES_MEM(0xE6518000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(288)),
+ /* I2C2 */
+ DEFINE_RES_MEM(0xE6530000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(286)),
+ /* I2C3 */
+ DEFINE_RES_MEM(0xE6540000, 0x40),
+ DEFINE_RES_IRQ(gic_spi(290)),
+
+ };
+
+ #define r8a7790_register_i2c(idx) \
+ platform_device_register_simple( \
+ "i2c-rcar_gen2", idx, \
+ i2c_resources + (2 * idx), 2); \
+
void __init r8a7790_pinmux_init(void)
{
- platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
- ARRAY_SIZE(pfc_resources));
+ r8a7790_register_pfc();
r8a7790_register_gpio(0);
r8a7790_register_gpio(1);
r8a7790_register_gpio(2);
r8a7790_register_gpio(3);
r8a7790_register_gpio(4);
r8a7790_register_gpio(5);
+ r8a7790_register_i2c(0);
+ r8a7790_register_i2c(1);
+ r8a7790_register_i2c(2);
+ r8a7790_register_i2c(3);
}
- #define SCIF_COMMON(scif_type, baseaddr, irq) \
- .type = scif_type, \
- .mapbase = baseaddr, \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .irqs = SCIx_IRQ_MUXED(irq)
-
- #define SCIFA_DATA(index, baseaddr, irq) \
- [index] = { \
- SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
- .scbrr_algo_id = SCBRR_ALGO_4, \
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
- }
-
- #define SCIFB_DATA(index, baseaddr, irq) \
- [index] = { \
- SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
- .scbrr_algo_id = SCBRR_ALGO_4, \
- .scscr = SCSCR_RE | SCSCR_TE, \
- }
-
- #define SCIF_DATA(index, baseaddr, irq) \
- [index] = { \
- SCIF_COMMON(PORT_SCIF, baseaddr, irq), \
- .scbrr_algo_id = SCBRR_ALGO_2, \
- .scscr = SCSCR_RE | SCSCR_TE, \
- }
-
- #define HSCIF_DATA(index, baseaddr, irq) \
- [index] = { \
- SCIF_COMMON(PORT_HSCIF, baseaddr, irq), \
- .scbrr_algo_id = SCBRR_ALGO_6, \
- .scscr = SCSCR_RE | SCSCR_TE, \
+ #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \
+ static struct plat_sci_port scif##index##_platform_data = { \
+ .type = scif_type, \
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
+ .scscr = _scscr, \
+ }; \
+ \
+ static struct resource scif##index##_resources[] = { \
+ DEFINE_RES_MEM(baseaddr, 0x100), \
+ DEFINE_RES_IRQ(irq), \
}
- enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
- HSCIF0, HSCIF1 };
-
- static const struct plat_sci_port scif[] __initconst = {
- SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
- SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
- SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
- SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
- SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
- SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
- SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
- SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
- HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
- HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
- };
-
- static inline void r8a7790_register_scif(int idx)
- {
- platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
- sizeof(struct plat_sci_port));
- }
+ #define R8A7790_SCIF(index, baseaddr, irq) \
+ __R8A7790_SCIF(PORT_SCIF, SCSCR_RE | SCSCR_TE, \
+ index, baseaddr, irq)
+
+ #define R8A7790_SCIFA(index, baseaddr, irq) \
+ __R8A7790_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
+ index, baseaddr, irq)
+
+ #define R8A7790_SCIFB(index, baseaddr, irq) \
+ __R8A7790_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \
+ index, baseaddr, irq)
+
+ #define R8A7790_HSCIF(index, baseaddr, irq) \
+ __R8A7790_SCIF(PORT_HSCIF, SCSCR_RE | SCSCR_TE, \
+ index, baseaddr, irq)
+
+ R8A7790_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
+ R8A7790_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
+ R8A7790_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
+ R8A7790_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
+ R8A7790_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
+ R8A7790_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */
+ R8A7790_SCIF(6, 0xe6e60000, gic_spi(152)); /* SCIF0 */
+ R8A7790_SCIF(7, 0xe6e68000, gic_spi(153)); /* SCIF1 */
+ R8A7790_HSCIF(8, 0xe62c0000, gic_spi(154)); /* HSCIF0 */
+ R8A7790_HSCIF(9, 0xe62c8000, gic_spi(155)); /* HSCIF1 */
+
+ #define r8a7790_register_scif(index) \
+ platform_device_register_resndata(&platform_bus, "sh-sci", index, \
+ scif##index##_resources, \
+ ARRAY_SIZE(scif##index##_resources), \
+ &scif##index##_platform_data, \
+ sizeof(scif##index##_platform_data))
static const struct renesas_irqc_config irqc0_data __initconst = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
void __init r8a7790_add_dt_devices(void)
{
- r8a7790_register_scif(SCIFA0);
- r8a7790_register_scif(SCIFA1);
- r8a7790_register_scif(SCIFB0);
- r8a7790_register_scif(SCIFB1);
- r8a7790_register_scif(SCIFB2);
- r8a7790_register_scif(SCIFA2);
- r8a7790_register_scif(SCIF0);
- r8a7790_register_scif(SCIF1);
- r8a7790_register_scif(HSCIF0);
- r8a7790_register_scif(HSCIF1);
+ r8a7790_register_scif(0);
+ r8a7790_register_scif(1);
+ r8a7790_register_scif(2);
+ r8a7790_register_scif(3);
+ r8a7790_register_scif(4);
+ r8a7790_register_scif(5);
+ r8a7790_register_scif(6);
+ r8a7790_register_scif(7);
+ r8a7790_register_scif(8);
+ r8a7790_register_scif(9);
r8a7790_register_cmt(00);
}
ARRAY_SIZE(pfc_resources));
}
- static struct plat_sci_port scif0_platform_data = {
- .mapbase = 0xe6c40000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(72), gic_spi(72),
- gic_spi(72), gic_spi(72) },
- };
-
- static struct platform_device scif0_device = {
- .name = "sh-sci",
- .id = 0,
- .dev = {
- .platform_data = &scif0_platform_data,
- },
- };
-
- static struct plat_sci_port scif1_platform_data = {
- .mapbase = 0xe6c50000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(73), gic_spi(73),
- gic_spi(73), gic_spi(73) },
- };
-
- static struct platform_device scif1_device = {
- .name = "sh-sci",
- .id = 1,
- .dev = {
- .platform_data = &scif1_platform_data,
- },
- };
-
- static struct plat_sci_port scif2_platform_data = {
- .mapbase = 0xe6c60000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(74), gic_spi(74),
- gic_spi(74), gic_spi(74) },
- };
-
- static struct platform_device scif2_device = {
- .name = "sh-sci",
- .id = 2,
- .dev = {
- .platform_data = &scif2_platform_data,
- },
- };
-
- static struct plat_sci_port scif3_platform_data = {
- .mapbase = 0xe6c70000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(75), gic_spi(75),
- gic_spi(75), gic_spi(75) },
- };
-
- static struct platform_device scif3_device = {
- .name = "sh-sci",
- .id = 3,
- .dev = {
- .platform_data = &scif3_platform_data,
- },
- };
-
- static struct plat_sci_port scif4_platform_data = {
- .mapbase = 0xe6c80000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(78), gic_spi(78),
- gic_spi(78), gic_spi(78) },
- };
-
- static struct platform_device scif4_device = {
- .name = "sh-sci",
- .id = 4,
- .dev = {
- .platform_data = &scif4_platform_data,
- },
- };
-
- static struct plat_sci_port scif5_platform_data = {
- .mapbase = 0xe6cb0000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(79), gic_spi(79),
- gic_spi(79), gic_spi(79) },
- };
-
- static struct platform_device scif5_device = {
- .name = "sh-sci",
- .id = 5,
- .dev = {
- .platform_data = &scif5_platform_data,
- },
- };
-
- static struct plat_sci_port scif6_platform_data = {
- .mapbase = 0xe6cc0000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(156), gic_spi(156),
- gic_spi(156), gic_spi(156) },
- };
-
- static struct platform_device scif6_device = {
- .name = "sh-sci",
- .id = 6,
- .dev = {
- .platform_data = &scif6_platform_data,
- },
- };
-
- static struct plat_sci_port scif7_platform_data = {
- .mapbase = 0xe6cd0000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFA,
- .irqs = { gic_spi(143), gic_spi(143),
- gic_spi(143), gic_spi(143) },
- };
-
- static struct platform_device scif7_device = {
- .name = "sh-sci",
- .id = 7,
- .dev = {
- .platform_data = &scif7_platform_data,
- },
- };
-
- static struct plat_sci_port scif8_platform_data = {
- .mapbase = 0xe6c30000,
- .flags = UPF_BOOT_AUTOCONF,
- .scscr = SCSCR_RE | SCSCR_TE,
- .scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIFB,
- .irqs = { gic_spi(80), gic_spi(80),
- gic_spi(80), gic_spi(80) },
- };
+ /* SCIF */
+ #define SH73A0_SCIF(scif_type, index, baseaddr, irq) \
+ static struct plat_sci_port scif##index##_platform_data = { \
+ .type = scif_type, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ .scscr = SCSCR_RE | SCSCR_TE, \
+ }; \
+ \
+ static struct resource scif##index##_resources[] = { \
+ DEFINE_RES_MEM(baseaddr, 0x100), \
+ DEFINE_RES_IRQ(irq), \
+ }; \
+ \
+ static struct platform_device scif##index##_device = { \
+ .name = "sh-sci", \
+ .id = index, \
+ .resource = scif##index##_resources, \
+ .num_resources = ARRAY_SIZE(scif##index##_resources), \
+ .dev = { \
+ .platform_data = &scif##index##_platform_data, \
+ }, \
+ }
- static struct platform_device scif8_device = {
- .name = "sh-sci",
- .id = 8,
- .dev = {
- .platform_data = &scif8_platform_data,
- },
- };
+ SH73A0_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(72));
+ SH73A0_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(73));
+ SH73A0_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(74));
+ SH73A0_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(75));
+ SH73A0_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(78));
+ SH73A0_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(79));
+ SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156));
+ SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143));
+ SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80));
static struct sh_timer_config cmt10_platform_data = {
.name = "CMT10",
};
static struct resource tmu00_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xfff60008, 0xc, "TMU00"),
+ [0] = DEFINE_RES_MEM(0xfff60008, 0xc),
[1] = {
.start = intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */
.flags = IORESOURCE_IRQ,
};
static struct resource tmu01_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xfff60014, 0xc, "TMU00"),
+ [0] = DEFINE_RES_MEM(0xfff60014, 0xc),
[1] = {
.start = intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */
.flags = IORESOURCE_IRQ,
};
static struct resource i2c0_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6820000, 0x426, "IIC0"),
+ [0] = DEFINE_RES_MEM(0xe6820000, 0x426),
[1] = {
.start = gic_spi(167),
.end = gic_spi(170),
};
static struct resource i2c1_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6822000, 0x426, "IIC1"),
+ [0] = DEFINE_RES_MEM(0xe6822000, 0x426),
[1] = {
.start = gic_spi(51),
.end = gic_spi(54),
};
static struct resource i2c2_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6824000, 0x426, "IIC2"),
+ [0] = DEFINE_RES_MEM(0xe6824000, 0x426),
[1] = {
.start = gic_spi(171),
.end = gic_spi(174),
};
static struct resource i2c3_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6826000, 0x426, "IIC3"),
+ [0] = DEFINE_RES_MEM(0xe6826000, 0x426),
[1] = {
.start = gic_spi(183),
.end = gic_spi(186),
};
static struct resource i2c4_resources[] = {
- [0] = DEFINE_RES_MEM_NAMED(0xe6828000, 0x426, "IIC4"),
+ [0] = DEFINE_RES_MEM(0xe6828000, 0x426),
[1] = {
.start = gic_spi(187),
.end = gic_spi(190),
/* an IPMMU module for ICB */
static struct resource ipmmu_resources[] = {
- DEFINE_RES_MEM_NAMED(0xfe951000, 0x100, "IPMMU"),
+ DEFINE_RES_MEM(0xfe951000, 0x100),
};
static const char * const ipmmu_dev_names[] = {
config ARCH_SUNXI
bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
+ select ARM_PSCI
select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
select HAVE_SMP
select PINCTRL
select PINCTRL_SUNXI
+ select RESET_CONTROLLER
select SPARSE_IRQ
select SUN4I_TIMER
+ select SUN5I_HSTIMER
#define U300_TIMER_APP_CRC (0x100)
#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001)
-#define TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
-#define US_PER_TICK ((1000000 + (HZ/2)) / HZ)
-
static void __iomem *u300_timer_base;
+struct u300_clockevent_data {
+ struct clock_event_device cevd;
+ unsigned ticks_per_jiffy;
+};
+
/*
* The u300_set_mode() function is always called first, if we
* have oneshot timer active, the oneshot scheduling function
static void u300_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
+ struct u300_clockevent_data *cevdata =
+ container_of(evt, struct u300_clockevent_data, cevd);
+
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* Disable interrupts on GPT1 */
* Set the periodic mode to a certain number of ticks per
* jiffy.
*/
- writel(TICKS_PER_JIFFY,
+ writel(cevdata->ticks_per_jiffy,
u300_timer_base + U300_TIMER_APP_GPT1TC);
/*
* Set continuous mode, so the timer keeps triggering
return 0;
}
-
-/* Use general purpose timer 1 as clock event */
-static struct clock_event_device clockevent_u300_1mhz = {
- .name = "GPT1",
- .rating = 300, /* Reasonably fast and accurate clock event */
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = u300_set_next_event,
- .set_mode = u300_set_mode,
+static struct u300_clockevent_data u300_clockevent_data = {
+ /* Use general purpose timer 1 as clock event */
+ .cevd = {
+ .name = "GPT1",
+ /* Reasonably fast and accurate clock event */
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = u300_set_next_event,
+ .set_mode = u300_set_mode,
+ },
};
/* Clock event timer interrupt handler */
static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = &clockevent_u300_1mhz;
+ struct clock_event_device *evt = &u300_clockevent_data.cevd;
/* ACK/Clear timer IRQ for the APP GPT1 Timer */
writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
* stamp. (Inspired by OMAP implementation.)
*/
- static u32 notrace u300_read_sched_clock(void)
+ static u64 notrace u300_read_sched_clock(void)
{
return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
}
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
- setup_sched_clock(u300_read_sched_clock, 32, rate);
+ u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+
+ sched_clock_register(u300_read_sched_clock, 32, rate);
u300_delay_timer.read_current_timer = &u300_read_current_timer;
u300_delay_timer.freq = rate;
pr_err("timer: failed to initialize U300 clock source\n");
/* Configure and register the clockevent */
- clockevents_config_and_register(&clockevent_u300_1mhz, rate,
+ clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
1, 0xffffffff);
/*
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/sched_clock.h>
+#include <plat/time.h>
/*
* MBus bridge block registers.
* at least 7.5ns (133MHz TCLK).
*/
- static u32 notrace orion_read_sched_clock(void)
+ static u64 notrace orion_read_sched_clock(void)
{
return ~readl(timer_base + TIMER0_VAL_OFF);
}
static struct irqaction orion_timer_irq = {
.name = "orion_tick",
- .flags = IRQF_DISABLED | IRQF_TIMER,
+ .flags = IRQF_TIMER,
.handler = orion_timer_interrupt
};
/*
* Set scale and timer for sched_clock.
*/
- setup_sched_clock(orion_read_sched_clock, 32, tclk);
+ sched_clock_register(orion_read_sched_clock, 32, tclk);
/*
* Setup free-running clocksource timer (interrupts
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
+obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
- obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o
+ obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
projects / karo-tx-linux.git / commitdiff