return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
}
-static inline struct s3c2410_nand *s3c2410_get_base_nand(void)
+static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void)
{
- return (struct s3c2410_nand *)S3C2410_NAND_BASE;
+ return (struct s3c24x0_nand *)S3C2410_NAND_BASE;
}
static inline struct s3c24x0_uart
return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE;
}
-static inline struct s3c2440_nand *s3c2440_get_base_nand(void)
+static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void)
{
- return (struct s3c2440_nand *)S3C2440_NAND_BASE;
+ return (struct s3c24x0_nand *)S3C2440_NAND_BASE;
}
static inline struct s3c24x0_uart
};
-#ifdef CONFIG_S3C2410
-/* NAND FLASH (see S3C2410 manual chapter 6) */
-struct s3c2410_nand {
- u32 nfconf;
- u32 nfcmd;
- u32 nfaddr;
- u32 nfdata;
- u32 nfstat;
- u32 nfecc;
-};
-#endif
-#ifdef CONFIG_S3C2440
-/* NAND FLASH (see S3C2440 manual chapter 6) */
-struct s3c2440_nand {
+/* NAND FLASH (see manual chapter 6) */
+struct s3c24x0_nand {
u32 nfconf;
+#ifndef CONFIG_S3C2410
u32 nfcont;
+#endif
u32 nfcmd;
u32 nfaddr;
u32 nfdata;
+#ifndef CONFIG_S3C2410
u32 nfeccd0;
u32 nfeccd1;
u32 nfeccd;
+#endif
u32 nfstat;
+#ifdef CONFIG_S3C2410
+ u32 nfecc;
+#else
u32 nfstat0;
u32 nfstat1;
-};
+ u32 nfmecc0;
+ u32 nfmecc1;
+ u32 nfsecc;
+ u32 nfsblk;
+ u32 nfeblk;
#endif
-
+};
/* UART (see manual chapter 11) */
struct s3c24x0_uart {
/* Set up temporary stack */
li sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+ move fp, sp
la t9, board_init_f
jr t9
- nop
+ move ra, zero
/*
* void relocate_code (addr_sp, gd, addr_moni)
.ent relocate_code
relocate_code:
move sp, a0 # set new stack pointer
+ move fp, sp
move s0, a1 # save gd in s0
move s2, a2 # save destination address in s2
addi t1, 4
move a0, s0 # a0 <-- gd
+ move a1, s2
la t9, board_init_r
jr t9
- move a1, s2
+ move ra, zero
.end relocate_code
/* Set up temporary stack */
dli sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+ move fp, sp
dla t9, board_init_f
jr t9
- nop
+ move ra, zero
/*
* void relocate_code (addr_sp, gd, addr_moni)
.ent relocate_code
relocate_code:
move sp, a0 # set new stack pointer
+ move fp, sp
move s0, a1 # save gd in s0
move s2, a2 # save destination address in s2
daddi t1, 8
move a0, s0 # a0 <-- gd
+ move a1, s2
dla t9, board_init_r
jr t9
- move a1, s2
+ move ra, zero
.end relocate_code
# SPDX-License-Identifier: GPL-2.0+
#
-ifndef CONFIG_SYS_GENERIC_BOARD
-obj-y += board.o
-endif
obj-y += io.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <serial.h>
-#include <stdio_dev.h>
-#include <version.h>
-#include <net.h>
-#include <environment.h>
-#include <nand.h>
-#include <onenand_uboot.h>
-#include <spi.h>
-
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-ulong monitor_flash_len;
-
-static char *failed = "*** failed ***\n";
-
-int __board_early_init_f(void)
-{
- /*
- * Nothing to do in this dummy implementation
- */
- return 0;
-}
-int board_early_init_f(void)
- __attribute__((weak, alias("__board_early_init_f")));
-
-static int init_func_ram(void)
-{
-#ifdef CONFIG_BOARD_TYPES
- int board_type = gd->board_type;
-#else
- int board_type = 0; /* use dummy arg */
-#endif
- puts("DRAM: ");
-
- gd->ram_size = initdram(board_type);
- if (gd->ram_size > 0) {
- print_size(gd->ram_size, "\n");
- return 0;
- }
- puts(failed);
- return 1;
-}
-
-static int display_banner(void)
-{
-
- printf("\n\n%s\n\n", version_string);
- return 0;
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-static void display_flash_config(ulong size)
-{
- puts("Flash: ");
- print_size(size, "\n");
-}
-#endif
-
-static int init_baudrate(void)
-{
- gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
- return 0;
-}
-
-
-/*
- * Breath some life into the board...
- *
- * The first part of initialization is running from Flash memory;
- * its main purpose is to initialize the RAM so that we
- * can relocate the monitor code to RAM.
- */
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t)(void);
-
-init_fnc_t *init_sequence[] = {
- board_early_init_f,
- timer_init,
- env_init, /* initialize environment */
- init_baudrate, /* initialize baudrate settings */
- serial_init, /* serial communications setup */
- console_init_f,
- display_banner, /* say that we are here */
- checkboard,
- init_func_ram,
- NULL,
-};
-
-
-void board_init_f(ulong bootflag)
-{
- gd_t gd_data, *id;
- bd_t *bd;
- init_fnc_t **init_fnc_ptr;
- ulong addr, addr_sp, len;
- ulong *s;
-
- /* Pointer is writable since we allocated a register for it.
- */
- gd = &gd_data;
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("" : : : "memory");
-
- memset((void *)gd, 0, sizeof(gd_t));
-
- for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- if ((*init_fnc_ptr)() != 0)
- hang();
- }
-
- /*
- * Now that we have DRAM mapped and working, we can
- * relocate the code and continue running from DRAM.
- */
- addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
-
- /* We can reserve some RAM "on top" here.
- */
-
- /* round down to next 4 kB limit.
- */
- addr &= ~(4096 - 1);
- debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
-
- /* Reserve memory for U-Boot code, data & bss
- * round down to next 16 kB limit
- */
- len = bss_end() - CONFIG_SYS_MONITOR_BASE;
- addr -= len;
- addr &= ~(16 * 1024 - 1);
-
- debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-
- /* Reserve memory for malloc() arena.
- */
- addr_sp = addr - TOTAL_MALLOC_LEN;
- debug("Reserving %dk for malloc() at: %08lx\n",
- TOTAL_MALLOC_LEN >> 10, addr_sp);
-
- /*
- * (permanently) allocate a Board Info struct
- * and a permanent copy of the "global" data
- */
- addr_sp -= sizeof(bd_t);
- bd = (bd_t *)addr_sp;
- gd->bd = bd;
- debug("Reserving %zu Bytes for Board Info at: %08lx\n",
- sizeof(bd_t), addr_sp);
-
- addr_sp -= sizeof(gd_t);
- id = (gd_t *)addr_sp;
- debug("Reserving %zu Bytes for Global Data at: %08lx\n",
- sizeof(gd_t), addr_sp);
-
- /* Reserve memory for boot params.
- */
- addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
- bd->bi_boot_params = addr_sp;
- debug("Reserving %dk for boot params() at: %08lx\n",
- CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
-
- /*
- * Finally, we set up a new (bigger) stack.
- *
- * Leave some safety gap for SP, force alignment on 16 byte boundary
- * Clear initial stack frame
- */
- addr_sp -= 16;
- addr_sp &= ~0xF;
- s = (ulong *)addr_sp;
- *s-- = 0;
- *s-- = 0;
- addr_sp = (ulong)s;
- debug("Stack Pointer at: %08lx\n", addr_sp);
-
- /*
- * Save local variables to board info struct
- */
- bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM */
- bd->bi_memsize = gd->ram_size; /* size of DRAM in bytes */
-
- memcpy(id, (void *)gd, sizeof(gd_t));
-
- relocate_code(addr_sp, id, addr);
-
- /* NOTREACHED - relocate_code() does not return */
-}
-
-/*
- * This is the next part if the initialization sequence: we are now
- * running from RAM and have a "normal" C environment, i. e. global
- * data can be written, BSS has been cleared, the stack size in not
- * that critical any more, etc.
- */
-
-void board_init_r(gd_t *id, ulong dest_addr)
-{
-#ifndef CONFIG_SYS_NO_FLASH
- ulong size;
-#endif
- bd_t *bd;
-
- gd = id;
- gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-
- debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
- gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
-
- monitor_flash_len = image_copy_end() - dest_addr;
-
- serial_initialize();
-
- bd = gd->bd;
-
- /* The Malloc area is immediately below the monitor copy in DRAM */
- mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
- TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
-
-#ifndef CONFIG_SYS_NO_FLASH
- /* configure available FLASH banks */
- size = flash_init();
- display_flash_config(size);
- bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
- bd->bi_flashsize = size;
-
-#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
- bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */
-#else
- bd->bi_flashoffset = 0;
-#endif
-#else
- bd->bi_flashstart = 0;
- bd->bi_flashsize = 0;
- bd->bi_flashoffset = 0;
-#endif
-
-#ifdef CONFIG_CMD_NAND
- puts("NAND: ");
- nand_init(); /* go init the NAND */
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
- onenand_init();
-#endif
-
- /* relocate environment function pointers etc. */
- env_relocate();
-
-#if defined(CONFIG_PCI)
- /*
- * Do pci configuration
- */
- pci_init();
-#endif
-
-/** leave this here (after malloc(), environment and PCI are working) **/
- /* Initialize stdio devices */
- stdio_init();
-
- jumptable_init();
-
- /* Initialize the console (after the relocation and devices init) */
- console_init_r();
-/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
-
- /* Initialize from environment */
- load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
-#ifdef CONFIG_CMD_SPI
- puts("SPI: ");
- spi_init(); /* go init the SPI */
- puts("ready\n");
-#endif
-
-#if defined(CONFIG_MISC_INIT_R)
- /* miscellaneous platform dependent initialisations */
- misc_init_r();
-#endif
-
-#ifdef CONFIG_BITBANGMII
- bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
- puts("Net: ");
- eth_initialize(gd->bd);
-#endif
-
- /* main_loop() can return to retry autoboot, if so just run it again. */
- for (;;)
- main_loop();
-
- /* NOTREACHED - no way out of command loop except booting */
-}
*/
#include <common.h>
-#include <command.h>
#include <image.h>
-#include <u-boot/zlib.h>
-#include <asm/byteorder.h>
#include <asm/addrspace.h>
DECLARE_GLOBAL_DATA_PTR;
lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp);
}
+static int boot_setup_linux(bootm_headers_t *images)
+{
+ int ret;
+ ulong rd_len;
+
+ rd_len = images->rd_end - images->rd_start;
+ ret = boot_ramdisk_high(&images->lmb, images->rd_start,
+ rd_len, &images->initrd_start, &images->initrd_end);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static void linux_cmdline_init(void)
{
linux_argc = 1;
int do_bootm_linux(int flag, int argc, char * const argv[],
bootm_headers_t *images)
{
+ int ret;
+
/* No need for those on MIPS */
if (flag & BOOTM_STATE_OS_BD_T)
return -1;
return 0;
}
+ ret = boot_setup_linux(images);
+ if (ret)
+ return ret;
+
boot_cmdline_linux(images);
boot_prep_linux(images);
boot_jump_linux(images);
menu "NAND Device Support"
+config SYS_NAND_SELF_INIT
+ bool
+ help
+ This option, if enabled, provides more flexible and linux-like
+ NAND initialization process.
+
if !SPL_BUILD
config NAND_DENALI
bool "Support Denali NAND controller"
+ select SYS_NAND_SELF_INIT
help
Enable support for the Denali NAND controller.
* this macro allows us to convert from an MTD structure to our own
* device context (denali) structure.
*/
-#define mtd_to_denali(m) (((struct nand_chip *)mtd->priv)->priv)
+#define mtd_to_denali(m) container_of(m->priv, struct denali_nand_info, nand)
/* These constants are defined by the driver to enable common driver
* configuration options. */
static struct nand_ecclayout nand_oob;
-static int denali_nand_init(struct nand_chip *nand)
+static int denali_init(struct denali_nand_info *denali)
{
- struct denali_nand_info *denali;
+ int ret;
- denali = malloc(sizeof(*denali));
- if (!denali)
- return -ENOMEM;
+ denali_hw_init(denali);
- nand->priv = denali;
+ denali->mtd->name = "denali-nand";
+ denali->mtd->owner = THIS_MODULE;
+ denali->mtd->priv = &denali->nand;
- denali->flash_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
- denali->flash_mem = (void __iomem *)CONFIG_SYS_NAND_DATA_BASE;
+ /* register the driver with the NAND core subsystem */
+ denali->nand.select_chip = denali_select_chip;
+ denali->nand.cmdfunc = denali_cmdfunc;
+ denali->nand.read_byte = denali_read_byte;
+ denali->nand.read_buf = denali_read_buf;
+ denali->nand.waitfunc = denali_waitfunc;
+
+ /*
+ * scan for NAND devices attached to the controller
+ * this is the first stage in a two step process to register
+ * with the nand subsystem
+ */
+ if (nand_scan_ident(denali->mtd, denali->max_banks, NULL)) {
+ ret = -ENXIO;
+ goto fail;
+ }
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
/* check whether flash got BBT table (located at end of flash). As we
* use NAND_BBT_NO_OOB, the BBT page will start with
* bbt_pattern. We will have mirror pattern too */
- nand->bbt_options |= NAND_BBT_USE_FLASH;
+ denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
/*
* We are using main + spare with ECC support. As BBT need ECC support,
* we need to ensure BBT code don't write to OOB for the BBT pattern.
* All BBT info will be stored into data area with ECC support.
*/
- nand->bbt_options |= NAND_BBT_NO_OOB;
+ denali->nand.bbt_options |= NAND_BBT_NO_OOB;
#endif
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.size = CONFIG_NAND_DENALI_ECC_SIZE;
- nand->ecc.read_oob = denali_read_oob;
- nand->ecc.write_oob = denali_write_oob;
- nand->ecc.read_page = denali_read_page;
- nand->ecc.read_page_raw = denali_read_page_raw;
- nand->ecc.write_page = denali_write_page;
- nand->ecc.write_page_raw = denali_write_page_raw;
+ denali->nand.ecc.mode = NAND_ECC_HW;
+ denali->nand.ecc.size = CONFIG_NAND_DENALI_ECC_SIZE;
+
/*
* Tell driver the ecc strength. This register may be already set
* correctly. So we read this value out.
*/
- nand->ecc.strength = readl(denali->flash_reg + ECC_CORRECTION);
- switch (nand->ecc.size) {
+ denali->nand.ecc.strength = readl(denali->flash_reg + ECC_CORRECTION);
+ switch (denali->nand.ecc.size) {
case 512:
- nand->ecc.bytes = (nand->ecc.strength * 13 + 15) / 16 * 2;
+ denali->nand.ecc.bytes =
+ (denali->nand.ecc.strength * 13 + 15) / 16 * 2;
break;
case 1024:
- nand->ecc.bytes = (nand->ecc.strength * 14 + 15) / 16 * 2;
+ denali->nand.ecc.bytes =
+ (denali->nand.ecc.strength * 14 + 15) / 16 * 2;
break;
default:
pr_err("Unsupported ECC size\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto fail;
}
- nand_oob.eccbytes = nand->ecc.bytes;
- nand->ecc.layout = &nand_oob;
-
- /* Set address of hardware control function */
- nand->cmdfunc = denali_cmdfunc;
- nand->read_byte = denali_read_byte;
- nand->read_buf = denali_read_buf;
- nand->select_chip = denali_select_chip;
- nand->waitfunc = denali_waitfunc;
- denali_hw_init(denali);
- return 0;
+ nand_oob.eccbytes = denali->nand.ecc.bytes;
+ denali->nand.ecc.layout = &nand_oob;
+
+ writel(denali->mtd->erasesize / denali->mtd->writesize,
+ denali->flash_reg + PAGES_PER_BLOCK);
+ writel(denali->nand.options & NAND_BUSWIDTH_16 ? 1 : 0,
+ denali->flash_reg + DEVICE_WIDTH);
+ writel(denali->mtd->writesize,
+ denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
+ writel(denali->mtd->oobsize,
+ denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ if (readl(denali->flash_reg + DEVICES_CONNECTED) == 0)
+ writel(1, denali->flash_reg + DEVICES_CONNECTED);
+
+ /* override the default operations */
+ denali->nand.ecc.read_page = denali_read_page;
+ denali->nand.ecc.read_page_raw = denali_read_page_raw;
+ denali->nand.ecc.write_page = denali_write_page;
+ denali->nand.ecc.write_page_raw = denali_write_page_raw;
+ denali->nand.ecc.read_oob = denali_read_oob;
+ denali->nand.ecc.write_oob = denali_write_oob;
+
+ if (nand_scan_tail(denali->mtd)) {
+ ret = -ENXIO;
+ goto fail;
+ }
+
+ ret = nand_register(0);
+
+fail:
+ return ret;
+}
+
+static int __board_nand_init(void)
+{
+ struct denali_nand_info *denali;
+
+ denali = kzalloc(sizeof(*denali), GFP_KERNEL);
+ if (!denali)
+ return -ENOMEM;
+
+ /*
+ * If CONFIG_SYS_NAND_SELF_INIT is defined, each driver is responsible
+ * for instantiating struct nand_chip, while drivers/mtd/nand/nand.c
+ * still provides a "struct mtd_info nand_info" instance.
+ */
+ denali->mtd = &nand_info[0];
+
+ /*
+ * In the future, these base addresses should be taken from
+ * Device Tree or platform data.
+ */
+ denali->flash_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
+ denali->flash_mem = (void __iomem *)CONFIG_SYS_NAND_DATA_BASE;
+
+ return denali_init(denali);
}
-int board_nand_init(struct nand_chip *chip)
+void board_nand_init(void)
{
- return denali_nand_init(chip);
+ if (__board_nand_init() < 0)
+ pr_warn("Failed to initialize Denali NAND controller.\n");
}
#define DT 3
struct denali_nand_info {
- struct mtd_info mtd;
- struct nand_chip *nand;
-
+ struct mtd_info *mtd;
+ struct nand_chip nand;
int flash_bank; /* currently selected chip */
int status;
int platform;
{
struct nand_chip *chip = mtd->priv;
+ if (!(chip->options & NAND_BBT_SCANNED)) {
+ chip->scan_bbt(mtd);
+ chip->options |= NAND_BBT_SCANNED;
+ }
+
if (!chip->bbt)
return chip->block_bad(mtd, ofs, getchip);
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
- return 0;
+ chip->options |= NAND_BBT_SCANNED;
- /* Build bad block table */
- return chip->scan_bbt(mtd);
+ return 0;
}
EXPORT_SYMBOL(nand_scan_tail);
}
#endif
-static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void s3c24x0_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
- struct s3c2410_nand *nand = s3c2410_get_base_nand();
+ struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
writeb(cmd, chip->IO_ADDR_W);
}
-static int s3c2410_dev_ready(struct mtd_info *mtd)
+static int s3c24x0_dev_ready(struct mtd_info *mtd)
{
- struct s3c2410_nand *nand = s3c2410_get_base_nand();
+ struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
debug("dev_ready\n");
return readl(&nand->nfstat) & 0x01;
}
#ifdef CONFIG_S3C2410_NAND_HWECC
-void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+void s3c24x0_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
- struct s3c2410_nand *nand = s3c2410_get_base_nand();
- debug("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
+ struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
+ debug("s3c24x0_nand_enable_hwecc(%p, %d)\n", mtd, mode);
writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC, &nand->nfconf);
}
-static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+static int s3c24x0_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
u_char *ecc_code)
{
- struct s3c2410_nand *nand = s3c2410_get_base_nand();
+ struct s3c24x0_nand *nand = s3c24x0_get_base_nand();
ecc_code[0] = readb(&nand->nfecc);
ecc_code[1] = readb(&nand->nfecc + 1);
ecc_code[2] = readb(&nand->nfecc + 2);
- debug("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
- mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
+ debug("s3c24x0_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
+ mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
return 0;
}
-static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+static int s3c24x0_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
if (read_ecc[0] == calc_ecc[0] &&
read_ecc[2] == calc_ecc[2])
return 0;
- printf("s3c2410_nand_correct_data: not implemented\n");
+ printf("s3c24x0_nand_correct_data: not implemented\n");
return -1;
}
#endif
u_int32_t cfg;
u_int8_t tacls, twrph0, twrph1;
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
- struct s3c2410_nand *nand_reg = s3c2410_get_base_nand();
+ struct s3c24x0_nand *nand_reg = s3c24x0_get_base_nand();
debug("board_nand_init()\n");
#endif
/* hwcontrol always must be implemented */
- nand->cmd_ctrl = s3c2410_hwcontrol;
+ nand->cmd_ctrl = s3c24x0_hwcontrol;
- nand->dev_ready = s3c2410_dev_ready;
+ nand->dev_ready = s3c24x0_dev_ready;
#ifdef CONFIG_S3C2410_NAND_HWECC
- nand->ecc.hwctl = s3c2410_nand_enable_hwecc;
- nand->ecc.calculate = s3c2410_nand_calculate_ecc;
- nand->ecc.correct = s3c2410_nand_correct_data;
+ nand->ecc.hwctl = s3c24x0_nand_enable_hwecc;
+ nand->ecc.calculate = s3c24x0_nand_calculate_ecc;
+ nand->ecc.correct = s3c24x0_nand_correct_data;
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_16BIT);
}
+ /* Disable subpage writes as we do not provide ecc->hwctl */
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+
chip->dev_ready = vf610_nfc_dev_ready;
chip->cmdfunc = vf610_nfc_command;
chip->read_byte = vf610_nfc_read_byte;
#define CONFIG_DBAU1X00 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#ifdef CONFIG_DBAU1000
/* Also known as Merlot */
#define CONFIG_SOC_AU1000 1
#define CONFIG_PB1X00 1
#define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#ifdef CONFIG_PB1000
#define CONFIG_SOC_AU1000 1
#else
#define __CONFIG_H
#define CONFIG_QEMU_MIPS
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MISC_INIT_R
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
#define __CONFIG_H
#define CONFIG_QEMU_MIPS
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MISC_INIT_R
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */
#define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2)
projects / karo-tx-uboot.git / commitdiff