F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
+M: Shawn Guo <shawn.guo@linaro.org>
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-T: git git://git.pengutronix.de/git/imx/linux-2.6.git
+T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/
+F: arch/arm/boot/dts/imx*
F: arch/arm/configs/imx*_defconfig
-ARM/FREESCALE IMX6
-M: Shawn Guo <shawn.guo@linaro.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
-F: arch/arm/mach-imx/*imx6*
-
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
*/
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
/ {
- model = "TI AM3517 EVM (AM3517/05)";
- compatible = "ti,am3517-evm", "ti,omap3";
+ model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+ compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
memory {
device_type = "memory";
--- /dev/null
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ };
+
+ ocp {
+ am35x_otg_hs: am35x_otg_hs@5c040000 {
+ compatible = "ti,omap3-musb";
+ ti,hwmods = "am35x_otg_hs";
+ status = "disabled";
+ reg = <0x5c040000 0x1000>;
+ interrupts = <71>;
+ interrupt-names = "mc";
+ };
+
+ davinci_emac: ethernet@0x5c000000 {
+ compatible = "ti,am3517-emac";
+ ti,hwmods = "davinci_emac";
+ status = "disabled";
+ reg = <0x5c000000 0x30000>;
+ interrupts = <67 68 69 70>;
+ ti,davinci-ctrl-reg-offset = <0x10000>;
+ ti,davinci-ctrl-mod-reg-offset = <0>;
+ ti,davinci-ctrl-ram-offset = <0x20000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ ti,davinci-rmii-en = /bits/ 8 <1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ davinci_mdio: ethernet@0x5c030000 {
+ compatible = "ti,davinci_mdio";
+ ti,hwmods = "davinci_mdio";
+ status = "disabled";
+ reg = <0x5c030000 0x1000>;
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart4: serial@4809e000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ status = "disabled";
+ reg = <0x4809e000 0x400>;
+ interrupts = <84>;
+ dmas = <&sdma 55 &sdma 54>;
+ dma-names = "tx", "rx";
+ clock-frequency = <48000000>;
+ };
+ };
+};
/dts-v1/;
-#include "omap34xx.dtsi"
+#include "omap34xx-hs.dtsi"
/ {
model = "Nokia N900";
* published by the Free Software Foundation.
*/
-#include "omap36xx.dtsi"
+#include "omap36xx-hs.dtsi"
/ {
cpus {
--- /dev/null
+/* Disabled modules for secure omaps */
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+ status = "disabled";
+};
+
+&sham {
+ status = "disabled";
+};
+
+&timer12 {
+ status = "disabled";
+};
--- /dev/null
+/* Disabled modules for secure omaps */
+
+#include "omap36xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+ status = "disabled";
+};
+
+&sham {
+ status = "disabled";
+};
+
+&timer12 {
+ status = "disabled";
+};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+ interrupts = <0 11 4>,
+ <0 15 4>,
+ <0 16 4>,
+ <0 17 4>;
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0xa0>;
- interrupts = <0 18 1>,
- <0 19 1>,
- <0 20 1>,
- <0 21 1>,
- <0 22 1>;
+ interrupts = <0 18 4>,
+ <0 19 4>,
+ <0 20 4>,
+ <0 21 4>,
+ <0 22 4>;
clocks = <&osc24M>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 0 1>;
+ interrupts = <0 0 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 1 1>;
+ interrupts = <0 1 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 2 1>;
+ interrupts = <0 2 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 3 1>;
+ interrupts = <0 3 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 4 1>;
+ interrupts = <0 4 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 5 1>;
+ interrupts = <0 5 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-emac";
reg = <0x01c0b000 0x1000>;
- interrupts = <0 55 1>;
+ interrupts = <0 55 4>;
clocks = <&ahb_gates 17>;
status = "disabled";
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 28 1>;
+ interrupts = <0 28 4>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
timer@01c20c00 {
compatible = "allwinner,sun4i-timer";
reg = <0x01c20c00 0x90>;
- interrupts = <0 22 1>,
- <0 23 1>,
- <0 24 1>,
- <0 25 1>,
- <0 67 1>,
- <0 68 1>;
+ interrupts = <0 22 4>,
+ <0 23 4>,
+ <0 24 4>,
+ <0 25 4>,
+ <0 67 4>,
+ <0 68 4>;
clocks = <&osc24M>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 1 1>;
+ interrupts = <0 1 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 2 1>;
+ interrupts = <0 2 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 3 1>;
+ interrupts = <0 3 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 4 1>;
+ interrupts = <0 4 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 17 1>;
+ interrupts = <0 17 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 18 1>;
+ interrupts = <0 18 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
- interrupts = <0 19 1>;
+ interrupts = <0 19 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 22>;
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
- interrupts = <0 20 1>;
+ interrupts = <0 20 4>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 23>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 7 1>;
+ interrupts = <0 7 4>;
clocks = <&apb1_gates 0>;
clock-frequency = <100000>;
status = "disabled";
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 8 1>;
+ interrupts = <0 8 4>;
clocks = <&apb1_gates 1>;
clock-frequency = <100000>;
status = "disabled";
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 9 1>;
+ interrupts = <0 9 4>;
clocks = <&apb1_gates 2>;
clock-frequency = <100000>;
status = "disabled";
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2b800 0x400>;
- interrupts = <0 88 1>;
+ interrupts = <0 88 4>;
clocks = <&apb1_gates 3>;
clock-frequency = <100000>;
status = "disabled";
i2c4: i2c@01c2bc00 {
compatible = "allwinner,sun4i-i2c";
reg = <0x01c2bc00 0x400>;
- interrupts = <0 89 1>;
+ interrupts = <0 89 4>;
clocks = <&apb1_gates 15>;
clock-frequency = <100000>;
status = "disabled";
static struct resource da830_mcasp1_resources[] = {
{
- .name = "mcasp1",
+ .name = "mpu",
.start = DAVINCI_DA830_MCASP1_REG_BASE,
.end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,
static struct resource da850_mcasp_resources[] = {
{
- .name = "mcasp",
+ .name = "mpu",
.start = DAVINCI_DA8XX_MCASP0_REG_BASE,
.end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,
static struct resource dm355_asp1_resources[] = {
{
+ .name = "mpu",
.start = DAVINCI_ASP1_BASE,
.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
int __init dm355_gpio_register(void)
{
return davinci_gpio_register(dm355_gpio_resources,
- sizeof(dm355_gpio_resources),
+ ARRAY_SIZE(dm355_gpio_resources),
&dm355_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
int __init dm365_gpio_register(void)
{
return davinci_gpio_register(dm365_gpio_resources,
- sizeof(dm365_gpio_resources),
+ ARRAY_SIZE(dm365_gpio_resources),
&dm365_gpio_platform_data);
}
static struct resource dm365_asp_resources[] = {
{
+ .name = "mpu",
.start = DAVINCI_DM365_ASP0_BASE,
.end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
static struct resource dm644x_asp_resources[] = {
{
+ .name = "mpu",
.start = DAVINCI_ASP0_BASE,
.end = DAVINCI_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
int __init dm644x_gpio_register(void)
{
return davinci_gpio_register(dm644_gpio_resources,
- sizeof(dm644_gpio_resources),
+ ARRAY_SIZE(dm644_gpio_resources),
&dm644_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
static struct resource dm646x_mcasp0_resources[] = {
{
- .name = "mcasp0",
+ .name = "mpu",
.start = DAVINCI_DM646X_MCASP0_REG_BASE,
.end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
static struct resource dm646x_mcasp1_resources[] = {
{
- .name = "mcasp1",
+ .name = "mpu",
.start = DAVINCI_DM646X_MCASP1_REG_BASE,
.end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
int __init dm646x_gpio_register(void)
{
return davinci_gpio_register(dm646x_gpio_resources,
- sizeof(dm646x_gpio_resources),
+ ARRAY_SIZE(dm646x_gpio_resources),
&dm646x_gpio_platform_data);
}
/*----------------------------------------------------------------------*/
#include <linux/clkdev.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
+#include <linux/input.h>
#include <linux/io.h>
#include <linux/irqchip.h>
+#include <linux/mailbox.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
+#include <linux/reboot.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
.name = "cpuidle-calxeda",
};
+static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
+{
+ u32 key = *(u32 *)data;
+
+ if (event != 0x1000)
+ return 0;
+
+ if (key == KEY_POWER)
+ orderly_poweroff(false);
+ else if (key == 0xffff)
+ ctrl_alt_del();
+
+ return 0;
+}
+static struct notifier_block hb_keys_nb = {
+ .notifier_call = hb_keys_notifier,
+};
+
static void __init highbank_init(void)
{
struct device_node *np;
bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
+ pl320_ipc_register_notifier(&hb_keys_nb);
+
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
if (psci_ops.cpu_suspend)
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
+
+static const char *am3517_boards_compat[] __initdata = {
+ "ti,am3517",
+ NULL,
+};
+
+DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = am35xx_init_early,
+ .init_irq = omap_intc_of_init,
+ .handle_irq = omap3_intc_handle_irq,
+ .init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
+ .init_time = omap3_gptimer_timer_init,
+ .dt_compat = am3517_boards_compat,
+ .restart = omap3xxx_restart,
+MACHINE_END
#endif
#ifdef CONFIG_SOC_AM33XX
odbfd_exit1:
kfree(hwmods);
odbfd_exit:
+ /* if data/we are at fault.. load up a fail handler */
+ if (ret)
+ pdev->dev.pm_domain = &omap_device_fail_pm_domain;
+
return ret;
}
return pm_generic_runtime_resume(dev);
}
+
+static int _od_fail_runtime_suspend(struct device *dev)
+{
+ dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+ return -ENODEV;
+}
+
+static int _od_fail_runtime_resume(struct device *dev)
+{
+ dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__);
+ return -ENODEV;
+}
+
#endif
#ifdef CONFIG_SUSPEND
#define _od_resume_noirq NULL
#endif
+struct dev_pm_domain omap_device_fail_pm_domain = {
+ .ops = {
+ SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
+ _od_fail_runtime_resume, NULL)
+ }
+};
+
struct dev_pm_domain omap_device_pm_domain = {
.ops = {
SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
#include "omap_hwmod.h"
extern struct dev_pm_domain omap_device_pm_domain;
+extern struct dev_pm_domain omap_device_fail_pm_domain;
/* omap_device._state values */
#define OMAP_DEVICE_STATE_UNKNOWN 0
}
/**
- * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
* @oh: struct omap_hwmod *
* @v: pointer to register contents to modify
*
return 0;
}
+/**
+ * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Clear the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
+{
+ u32 softrst_mask;
+
+ if (!oh->class->sysc ||
+ !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
+ return -EINVAL;
+
+ if (!oh->class->sysc->sysc_fields) {
+ WARN(1,
+ "omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
+ oh->name);
+ return -EINVAL;
+ }
+
+ softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+ *v &= ~softrst_mask;
+
+ return 0;
+}
+
/**
* _wait_softreset_complete - wait for an OCP softreset to complete
* @oh: struct omap_hwmod * to wait on
pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
oh->name, os->clk);
ret = -EINVAL;
+ continue;
}
os->_clk = c;
/*
pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
oh->name, oc->clk);
ret = -EINVAL;
+ continue;
}
oc->_clk = c;
/*
ret = _set_softreset(oh, &v);
if (ret)
goto dis_opt_clks;
+
+ _write_sysconfig(v, oh);
+ ret = _clear_softreset(oh, &v);
+ if (ret)
+ goto dis_opt_clks;
+
_write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
return 0;
}
+static int of_dev_find_hwmod(struct device_node *np,
+ struct omap_hwmod *oh)
+{
+ int count, i, res;
+ const char *p;
+
+ count = of_property_count_strings(np, "ti,hwmods");
+ if (count < 1)
+ return -ENODEV;
+
+ for (i = 0; i < count; i++) {
+ res = of_property_read_string_index(np, "ti,hwmods",
+ i, &p);
+ if (res)
+ continue;
+ if (!strcmp(p, oh->name)) {
+ pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
+ np->name, i, oh->name);
+ return i;
+ }
+ }
+
+ return -ENODEV;
+}
+
/**
* of_dev_hwmod_lookup - look up needed hwmod from dt blob
* @np: struct device_node *
* @oh: struct omap_hwmod *
+ * @index: index of the entry found
+ * @found: struct device_node * found or NULL
*
* Parse the dt blob and find out needed hwmod. Recursive function is
* implemented to take care hierarchical dt blob parsing.
- * Return: The device node on success or NULL on failure.
+ * Return: Returns 0 on success, -ENODEV when not found.
*/
-static struct device_node *of_dev_hwmod_lookup(struct device_node *np,
- struct omap_hwmod *oh)
+static int of_dev_hwmod_lookup(struct device_node *np,
+ struct omap_hwmod *oh,
+ int *index,
+ struct device_node **found)
{
- struct device_node *np0 = NULL, *np1 = NULL;
- const char *p;
+ struct device_node *np0 = NULL;
+ int res;
+
+ res = of_dev_find_hwmod(np, oh);
+ if (res >= 0) {
+ *found = np;
+ *index = res;
+ return 0;
+ }
for_each_child_of_node(np, np0) {
- if (of_find_property(np0, "ti,hwmods", NULL)) {
- p = of_get_property(np0, "ti,hwmods", NULL);
- if (!strcmp(p, oh->name))
- return np0;
- np1 = of_dev_hwmod_lookup(np0, oh);
- if (np1)
- return np1;
+ struct device_node *fc;
+ int i;
+
+ res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
+ if (res == 0) {
+ *found = fc;
+ *index = i;
+ return 0;
}
}
- return NULL;
+
+ *found = NULL;
+ *index = 0;
+
+ return -ENODEV;
}
/**
* _init_mpu_rt_base - populate the virtual address for a hwmod
* @oh: struct omap_hwmod * to locate the virtual address
* @data: (unused, caller should pass NULL)
+ * @index: index of the reg entry iospace in device tree
* @np: struct device_node * of the IP block's device node in the DT data
*
* Cache the virtual address used by the MPU to access this IP block's
* -ENXIO on absent or invalid register target address space.
*/
static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
- struct device_node *np)
+ int index, struct device_node *np)
{
struct omap_hwmod_addr_space *mem;
void __iomem *va_start = NULL;
if (!np)
return -ENXIO;
- va_start = of_iomap(np, oh->mpu_rt_idx);
+ va_start = of_iomap(np, index + oh->mpu_rt_idx);
} else {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
}
if (!va_start) {
- pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+ if (mem)
+ pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+ else
+ pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
+ oh->name, index, np->full_name);
return -ENXIO;
}
*/
static int __init _init(struct omap_hwmod *oh, void *data)
{
- int r;
+ int r, index;
struct device_node *np = NULL;
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
- if (of_have_populated_dt())
- np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+ if (of_have_populated_dt()) {
+ struct device_node *bus;
+
+ bus = of_find_node_by_name(NULL, "ocp");
+ if (!bus)
+ return -ENODEV;
+
+ r = of_dev_hwmod_lookup(bus, oh, &index, &np);
+ if (r)
+ pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
+ else if (np && index)
+ pr_warn("omap_hwmod: %s using broken dt data from %s\n",
+ oh->name, np->name);
+ }
if (oh->class->sysc) {
- r = _init_mpu_rt_base(oh, NULL, np);
+ r = _init_mpu_rt_base(oh, NULL, index, np);
if (r < 0) {
WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
oh->name);
goto error;
_write_sysconfig(v, oh);
+ ret = _clear_softreset(oh, &v);
+ if (ret)
+ goto error;
+ _write_sysconfig(v, oh);
+
error:
return ret;
}
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
* hence HWMOD_SWSUP_MSTANDBY
*/
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET),
+ SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
* hence HWMOD_SWSUP_MSTANDBY
*/
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
};
/*
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
* hence HWMOD_SWSUP_MSTANDBY
*/
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "l3init_60m_fclk",
.prcm = {
.omap4 = {
#include <mach/regs-ost.h>
#include <mach/reset.h>
+#include <mach/smemc.h>
unsigned int reset_status;
EXPORT_SYMBOL(reset_status);
writel_relaxed(OSSR_M3, OSSR);
/* ... in 100 ms */
writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
+ /*
+ * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71)
+ * we put SDRAM into self-refresh to prevent that
+ */
+ while (1)
+ writel_relaxed(MDREFR_SLFRSH, MDREFR);
}
void pxa_restart(enum reboot_mode mode, const char *cmd)
break;
}
}
-
* Tosa Keyboard
*/
static const uint32_t tosakbd_keymap[] = {
- KEY(0, 2, KEY_W),
- KEY(0, 6, KEY_K),
- KEY(0, 7, KEY_BACKSPACE),
- KEY(0, 8, KEY_P),
- KEY(1, 1, KEY_Q),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_T),
- KEY(1, 4, KEY_Y),
- KEY(1, 6, KEY_O),
- KEY(1, 7, KEY_I),
- KEY(1, 8, KEY_COMMA),
- KEY(2, 1, KEY_A),
- KEY(2, 2, KEY_D),
- KEY(2, 3, KEY_G),
- KEY(2, 4, KEY_U),
- KEY(2, 6, KEY_L),
- KEY(2, 7, KEY_ENTER),
- KEY(2, 8, KEY_DOT),
- KEY(3, 1, KEY_Z),
- KEY(3, 2, KEY_C),
- KEY(3, 3, KEY_V),
- KEY(3, 4, KEY_J),
- KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
- KEY(3, 6, TOSA_KEY_CANCEL),
- KEY(3, 7, TOSA_KEY_CENTER),
- KEY(3, 8, TOSA_KEY_OK),
- KEY(3, 9, KEY_LEFTSHIFT),
- KEY(4, 1, KEY_S),
- KEY(4, 2, KEY_R),
- KEY(4, 3, KEY_B),
- KEY(4, 4, KEY_N),
- KEY(4, 5, TOSA_KEY_CALENDAR),
- KEY(4, 6, TOSA_KEY_HOMEPAGE),
- KEY(4, 7, KEY_LEFTCTRL),
- KEY(4, 8, TOSA_KEY_LIGHT),
- KEY(4, 10, KEY_RIGHTSHIFT),
- KEY(5, 1, KEY_TAB),
- KEY(5, 2, KEY_SLASH),
- KEY(5, 3, KEY_H),
- KEY(5, 4, KEY_M),
- KEY(5, 5, TOSA_KEY_MENU),
- KEY(5, 7, KEY_UP),
- KEY(5, 11, TOSA_KEY_FN),
- KEY(6, 1, KEY_X),
- KEY(6, 2, KEY_F),
- KEY(6, 3, KEY_SPACE),
- KEY(6, 4, KEY_APOSTROPHE),
- KEY(6, 5, TOSA_KEY_MAIL),
- KEY(6, 6, KEY_LEFT),
- KEY(6, 7, KEY_DOWN),
- KEY(6, 8, KEY_RIGHT),
+ KEY(0, 1, KEY_W),
+ KEY(0, 5, KEY_K),
+ KEY(0, 6, KEY_BACKSPACE),
+ KEY(0, 7, KEY_P),
+ KEY(1, 0, KEY_Q),
+ KEY(1, 1, KEY_E),
+ KEY(1, 2, KEY_T),
+ KEY(1, 3, KEY_Y),
+ KEY(1, 5, KEY_O),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_COMMA),
+ KEY(2, 0, KEY_A),
+ KEY(2, 1, KEY_D),
+ KEY(2, 2, KEY_G),
+ KEY(2, 3, KEY_U),
+ KEY(2, 5, KEY_L),
+ KEY(2, 6, KEY_ENTER),
+ KEY(2, 7, KEY_DOT),
+ KEY(3, 0, KEY_Z),
+ KEY(3, 1, KEY_C),
+ KEY(3, 2, KEY_V),
+ KEY(3, 3, KEY_J),
+ KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
+ KEY(3, 5, TOSA_KEY_CANCEL),
+ KEY(3, 6, TOSA_KEY_CENTER),
+ KEY(3, 7, TOSA_KEY_OK),
+ KEY(3, 8, KEY_LEFTSHIFT),
+ KEY(4, 0, KEY_S),
+ KEY(4, 1, KEY_R),
+ KEY(4, 2, KEY_B),
+ KEY(4, 3, KEY_N),
+ KEY(4, 4, TOSA_KEY_CALENDAR),
+ KEY(4, 5, TOSA_KEY_HOMEPAGE),
+ KEY(4, 6, KEY_LEFTCTRL),
+ KEY(4, 7, TOSA_KEY_LIGHT),
+ KEY(4, 9, KEY_RIGHTSHIFT),
+ KEY(5, 0, KEY_TAB),
+ KEY(5, 1, KEY_SLASH),
+ KEY(5, 2, KEY_H),
+ KEY(5, 3, KEY_M),
+ KEY(5, 4, TOSA_KEY_MENU),
+ KEY(5, 6, KEY_UP),
+ KEY(5, 10, TOSA_KEY_FN),
+ KEY(6, 0, KEY_X),
+ KEY(6, 1, KEY_F),
+ KEY(6, 2, KEY_SPACE),
+ KEY(6, 3, KEY_APOSTROPHE),
+ KEY(6, 4, TOSA_KEY_MAIL),
+ KEY(6, 5, KEY_LEFT),
+ KEY(6, 6, KEY_DOWN),
+ KEY(6, 7, KEY_RIGHT),
};
static struct matrix_keymap_data tosakbd_keymap_data = {
switch (tegra_chip_id) {
case TEGRA20:
tegra20_fuse_init_randomness();
+ break;
case TEGRA30:
case TEGRA114:
default:
tegra30_fuse_init_randomness();
+ break;
}
pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
* NOTE: we assume for now that only irqs in the first gpio_chip
* can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
*/
- if (offset < d->irq_base)
+ if (offset < d->gpio_unbanked)
return d->gpio_irq + offset;
else
return -ENODEV;
/* pass "bank 0" GPIO IRQs to AINTC */
chips[0].chip.to_irq = gpio_to_irq_unbanked;
+ chips[0].gpio_irq = bank_irq;
+ chips[0].gpio_unbanked = pdata->gpio_unbanked;
binten = BIT(0);
/* AINTC handles mask/unmask; GPIO handles triggering */