]> git.kernelconcepts.de Git - karo-tx-linux.git/history - arch
ENGR00209620 MX6-Disable PU Brown out detection in low power mode.
[karo-tx-linux.git] / arch /
2013-05-24 Ranjani VaidyanathanENGR00209620 MX6-Disable PU Brown out detection in...
2013-05-24 Fugang DuanENGR00209520-02 - MX6SL MSL : Adjust FEC clock name.
2013-05-24 Fugang DuanENGR00209520-01 - MX6SL MSL : Add FEC support
2013-05-24 Tony LIUENGR00209480-5 mx6sl_usb : gadget: change the OTG1_ID...
2013-05-24 Tony LIUENGR00209480-4 mx6sl_usb remove the sw workaround to...
2013-05-24 Tony LIUENGR00209480-3 mx6sl_usb: fix too many wakeup interrupt...
2013-05-24 Tony LIUENGR00209480-2 mx6sl_usb:change usb irq number for...
2013-05-24 Tony LIUENGR00209480-1 mx6sl_usb bring up
2013-05-24 Ryan QIANENGR00209483 [imx6sl]: add USDHC support
2013-05-24 Zhang JiejingENGR00209454 imx6sl: fix build failure and clear warnni...
2013-05-24 Xinyu ChenENGR00182786 mx6q sabresd: Add power/reset function...
2013-05-24 Jason LiuENGR00182324-7 - MX6SL MSL: Add imx6s_defconfig
2013-05-24 Jason LiuENGR00182324-6 - MX6SL MSL: Add basic board file support
2013-05-24 Jason LiuENGR00182324-5 - MX6SL MSL: Add GPIO support
2013-05-24 Jason LiuENGR00182324-4 - MX6SL MSL: Enable L2 cache as OCRAM...
2013-05-24 Jason LiuENGR00182324-3 - MX6SL MSL: Add clock support for i...
2013-05-24 Jason LiuENGR00182324-2 - MX6SL MSL: Add Support for i.MX6SoloLi...
2013-05-24 Jason LiuENGR00182324-1 - MX6SL MSL: Add Memory/IRQ/IOMUX suppor...
2013-05-24 Zhang JiejingENGR00209059-2 mx6: config: add mfgtool reboot function...
2013-05-24 Zhang JiejingENGR00209059-1 MX6: reboot: add reboot to special function
2013-05-24 Xinyu ChenENGR00176278 mx6: make local timer work with WAIT mode
2013-05-24 Xinyu ChenENGR00176154 mx6q sabresd: change the position angle...
2013-05-24 Peter Zijlstrasched: Cleanup cpu_active madness
2013-05-24 Russell KingARM: fix rcu stalls on SMP platforms
2013-05-24 Thomas GleixnerARM: smpboot: Enable irqs on secondary CPU after markin...
2013-05-24 Anson HuangENGR00182243 [MX6]Fix suspend/resume issue
2013-05-24 Ranjani VaidyanathanENGR00181068: MX6 Source IPU_HSP and AXI clocks from...
2013-05-24 Robin GongENGR00181348-1 :sabresd pfuze support cpu internal...
2013-05-24 Rong DianENGR00181094-3: MX6 SABRESD: remove MAX8903 interrupt...
2013-05-24 Wayne ZouENGR00178630-2 MX6DL SabreSD: Add enable_lcd_ldb cmdlin...
2013-05-24 Wayne ZouENGR00178630-1 MX6Q/DL SabreSD:Remove disable_ldb comma...
2013-05-24 Sandor YuENGR00181107 add dma_alloc_writethrough function
2013-05-24 Alejandro SierraENGR00181070 Enable SPI NOR on kernel command line
2013-05-24 Steve CorneliusENGR00180943-7: Add CAAM device instantiation to iMX...
2013-05-24 Steve CorneliusENGR00180943-6: Place CAAM Job Ring resources in their...
2013-05-24 Steve CorneliusENGR00180943-5: Add CAAM instantiation data to i.MX6...
2013-05-24 Steve CorneliusENGR00180943-4: Add CAAM platform configuration to...
2013-05-24 Steve CorneliusENGR00180943-3: Add CAAM instantiation to i.MX6Q ARM2...
2013-05-24 Wayne ZouENGR00181191 MX6: set ipu2_clk parent from pll2_pfd_400M
2013-05-24 Rong DianENGR00181094-1: MX6 SABRESD: Add pin config for MAX8903
2013-05-24 Robby CaiENGR00180621-2: mx6dl_sabresd: Add pinmux setting for...
2013-05-24 justin.jiangENGR00180076: prompt "mmc0: error -110 during resume...
2013-05-24 Ranjani VaidyanathanENGR00180882- MX6DL Add bus frequency scaling support.
2013-05-24 Lin FuzhenENGR00178223-3 gpio-led: Add LED-GPIO control and trigg...
2013-05-24 Lin FuzhenENGR00178223-2 gpio-led: Add LED-GPIO control and trigg...
2013-05-24 Rong DianENGR00180647-1: MX6 SABRESD: Add pin config for max11801
2013-05-24 Ranjani VaidyanathanENGR00180185: MX6-Add support for low power audio playback
2013-05-24 Anson HuangENGR00180628 [MX6]L2 cache clean is not necessary in...
2013-05-24 Alan TullENGR00180350-1 HDMI set infoframe information
2013-05-24 Fugang DuanENGR00179636-03 - i.MX6 : Enable ethernet NAPI method...
2013-05-24 Anson HuangENGR00180537 [MX6]Fix standby unstable issue
2013-05-24 Terry LvENGR00179722: MLB: set correct mlb sys clock in mx6dl
2013-05-24 Richard ZhuENGR00180412 MX6 SATA: Enable PHY in the SATA initilization
2013-05-24 Alejandro SierraENGR00180055 Steer configuration to enable AUD5_RXD...
2013-05-24 Richard ZhuENGR00180230 MX6 PCIE: enlarge the eye diagram and...
2013-05-24 Allen XuENGR00180096 change NAND clock source to pll2_pfd_400M
2013-05-24 Gary ZhangENGR00180075 MX6: change CLKO source to pll4_audio_main_clk
2013-05-24 Jason LiuENGR00179851: i.mx6dl: map the MEM mode to STANDBY...
2013-05-24 Jason LiuENGR00179782: i.mx6: consolidate mx6q/dl_revision(...
2013-05-24 Allen XuENGR00179804 change NAND clock source from pll2_pfd_352...
2013-05-24 Liu YingENGR00179685 MX6 clock:Cleanup LDB DI parent clock
2013-05-24 Ranjani VaidyanathanENGR00179747: MX6DL-Fix boot failure
2013-05-24 Liu YingENGR00179647 MX6 clock:Correct LDB DI pclk for MX6Q...
2013-05-24 Ranjani VaidyanathanENGR00179574: MX6- Add bus frequency scaling support
2013-05-24 Ranjani VaidyanathanENGR00179582 MX6: Bypass PLL1 during WAIT
2013-05-24 Wayne ZouENGR00179631 MX6 SabreSD: Add MIPI DSI Display support
2013-05-24 Gary ZhangENGR00179628-2 MX6: add ssi info in sdma
2013-05-24 Richard ZhuENGR00179621 MX6 PCIE: bring up PCIE on i.MX6 SD board
2013-05-24 Chen LiangjunENGR00179498-2 SDMA: fix p2p sdma script error
2013-05-24 Allen XuENGR00179284-2 support ONFI NAND device on mx6q_arm2_po...
2013-05-24 Robin GongENGR00179497-2 MX6Q SabreSD: fix SPI nor flash pin...
2013-05-24 Lin FuzhenENGR00179408 MX6DL:Increasing CPU voltage for 800MHz...
2013-05-24 Jason LiuENGR00179426-2: i.mx6q: iomux: code clean up
2013-05-24 Jason LiuENGR00179426-1 i.mx6: iomux: NO_PAD_I/NO_PAD_MUX not...
2013-05-24 Larry LiENGR00178597 [MX6DL/S] Multi-instance test in GC880...
2013-05-24 Allen XuENGR00177241-1 mx6 close APBH DMA clock when no I/O...
2013-05-24 Alejandro SierraENGR00179129 Board support for I2C AMFM module for...
2013-05-24 Wayne ZouENGR00178875-1 VDOA: Add vdoa support on i.MX6 SOC...
2013-05-24 Chen LiangjunENGR00177235-2 SDMA: add p2p dma mode
2013-05-24 Dave MartinARM: assembler.h: Add string declaration macro
2013-05-24 Catalin MarinasARM: 7301/1: Rename the T() macro to TUSER() to avoid...
2013-05-24 Tony LIUENGR00178939 [mx6] usb host, msleep may be called in...
2013-05-24 Adrian AlonsoENGR00178915: imx6 clock fix build warnings
2013-05-24 Jason LiuENGR00178951-2 SYSRQ: enable CONFIG_MAGIC_SYSRQ by...
2013-05-24 Gary ZhangENGR00177581-4 MX6: add wm8962 mic support
2013-05-24 Fugang DuanENGR00160472 - MX6: add Ethernet ANSI/IEEE 802.2 LLC...
2013-05-24 Anson HuangENGR00178646-2 [MX6]Add SD1 and SD2 to interactive...
2013-05-24 Wayne ZouENGR00175724-1 IPU: change ipu_device thread process...
2013-05-24 Ranjani VaidyanathanENGR00178763: MX6-Fix TO1.0 boot-fail issue
2013-05-24 Alejandro SierraENGR00178584 uart3 pins configuration
2013-05-24 Robin GongENGR00178629 i.MX6 sabresd:support software power off...
2013-05-24 Alejandro SierraENGR00178582 Remove uart2 early parameter
2013-05-24 Danny NoldENGR00178581 - EPDC fb: Fix regulator-related EPDC...
2013-05-24 Ranjani VaidyanathanENGR00176366: MX6-Switch ARM_CLK to PLL2_400MHz when...
2013-05-24 Zhang JiejingENGR00178552 MX6XX_SABRESD: update pin mux for revB...
2013-05-24 Anson HuangENGR00178505 [MX6]Enable performance and ondemand governor
2013-05-24 Fugang DuanENGR00177932 - i.MX6 sabresd : Recorrect fec phy AR8031...
2013-05-24 Danny NoldENGR00178458 - WM8962 regulator constraint fix to preve...
2013-05-24 Richard ZhuENGR00178128 mx6 pcie: pass PCIEX1 CT network card...
2013-05-24 Frank LiENGR00178106 SabreSD: scan emmc slot sd4 firstly for...
next