Michael Ellerman [Sat, 28 Mar 2015 10:35:17 +0000 (21:35 +1100)]
selftests/powerpc: Add a test of the switch_endian() syscall
This adds a test of the switch_endian() syscall we added in the previous
commit.
We test it by calling the endian switch syscall, and then executing some
code in the other endian to check everything went as expected. That code
checks registers we expect to be maintained are. If the endian switch
failed to happen that code sequence will be illegal and cause the test
to abort.
We then switch back to the original endian, do the same checks and
finally write a success message and exit(0).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Sat, 28 Mar 2015 10:35:16 +0000 (21:35 +1100)]
powerpc: Add a proper syscall for switching endianness
We currently have a "special" syscall for switching endianness. This is
syscall number 0x1ebe, which is handled explicitly in the 64-bit syscall
exception entry.
That has a few problems, firstly the syscall number is outside of the
usual range, which confuses various tools. For example strace doesn't
recognise the syscall at all.
Secondly it's handled explicitly as a special case in the syscall
exception entry, which is complicated enough without it.
As a first step toward removing the special syscall, we need to add a
regular syscall that implements the same functionality.
The logic is simple, it simply toggles the MSR_LE bit in the userspace
MSR. This is the same as the special syscall, with the caveat that the
special syscall clobbers fewer registers.
This version clobbers r9-r12, XER, CTR, and CR0-1,5-7.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tyrel Datwyler [Fri, 27 Mar 2015 19:47:25 +0000 (12:47 -0700)]
powerpc/pseries: Simplify check for suspendability during suspend/migration
During suspend/migration operation we must wait for the VASI state reported
by the hypervisor to become Suspending prior to making the ibm,suspend-me
RTAS call. Calling routines to rtas_ibm_supend_me() pass a vasi_state variable
that exposes the VASI state to the caller. This is unnecessary as the caller
only really cares about the following three conditions; if there is an error
we should bailout, success indicating we have suspended and woken back up so
proceed to device tree update, or we are not suspendable yet so try calling
rtas_ibm_suspend_me again shortly.
This patch removes the extraneous vasi_state variable and simply uses the
return code to communicate how to proceed. We either succeed, fail, or get
-EAGAIN in which case we sleep for a second before trying to call
rtas_ibm_suspend_me again. The behaviour of ppc_rtas() remains the same,
but migrate_store() now returns the propogated error code on failure.
Previously -1 was returned from migrate_store() in the failure case which
equates to -EPERM and was clearly wrong.
Jan Stancek [Tue, 24 Mar 2015 12:33:22 +0000 (08:33 -0400)]
powerpc/perf: add missing put_cpu_var in power_pmu_event_init
One path in power_pmu_event_init() calls get_cpu_var(), but is
missing matching call to put_cpu_var(), which causes preemption
imbalance and crash in user-space:
Yanjiang Jin [Fri, 27 Feb 2015 05:30:34 +0000 (13:30 +0800)]
powerpc/mm: Free string after creating kmem cache
kmem_cache_create()->kmem_cache_create_memcg()->kstrdup() allocates new
space and copys name's content, so it is safe to free name memory after
calling kmem_cache_create(). Else kmemleak will report the below
warning:
unreferenced object 0xc0000000f9002160 (size 16):
comm "swapper/0", pid 0, jiffies 4294892296 (age 1386.640s)
hex dump (first 16 bytes):
70 67 74 61 62 6c 65 2d 32 5e 39 00 de ad be ef pgtable-2^9.....
backtrace:
[<c0000000004e03ec>] .kvasprintf+0x5c/0xa0
[<c0000000004e045c>] .kasprintf+0x2c/0x50
[<c00000000002e36c>] .pgtable_cache_add+0xac/0x100
[<c00000000002e3e4>] .pgtable_cache_init+0x24/0x80
[<c000000000c6c67c>] .start_kernel+0x228/0x4c8
[<c000000000000594>] .start_here_common+0x24/0x90
Signed-off-by: Yanjiang Jin <yanjiang.jin@windriver.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fabian Frederick [Fri, 20 Feb 2015 18:12:53 +0000 (19:12 +0100)]
powerpc/pmac: replace current->state by set_current_state()
Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.
current->state = TASK_RUNNING can be replaced by __set_current_state()
Thanks to Peter Zijlstra for the exact definition of the problem.
Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
If CONFIG_SMP=n, <linux/smp.h> does not include <asm/smp.h>, causing:
drivers/cpufreq/ppc-corenet-cpufreq.c: In function 'corenet_cpufreq_cpu_init':
drivers/cpufreq/ppc-corenet-cpufreq.c:173:3: error: implicit declaration of function 'get_hard_smp_processor_id' [-Werror=implicit-funcuresh E. Warrier" <warrier@linux.vnet.ibm.com>
X-Patchwork-Id: 443703
Message-Id: <54EE5989.7010800@linux.vnet.ibm.com>
To: linuxppc-dev@ozlabs.org
Date: Wed, 25 Feb 2015 17:23:53 -0600
Export __spin_yield so that the arch_spin_unlock() function can
be invoked from a module. This will be required for modules where
we want to take a lock that is also is acquired in hypervisor
real mode. Because we want to avoid running any lockdep code
(which may not be safe in real mode), this lock needs to be
an arch_spinlock_t instead of a normal spinlock.
Signed-off-by: Suresh Warrier <warrier@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/pmac: Fix DT refcount imbalance in pmac_pic_probe_oldstyle
Internally, of_find_node_by_name() calls of_node_put() on its "from"
parameter, which must not be done on "master", as it's still in use, and
will be released manually later. This may cause a zero kref refcount.
Call of_node_get() before to compensate for this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
If OPAL requests it, call it back via opal_poll_events() at a
regular interval. Some versions of OPAL on some machines require
this to operate some internal timeouts properly.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Vasant Hegde [Fri, 13 Feb 2015 09:56:33 +0000 (15:26 +0530)]
powerpc/powernv: Check image loaded or not before calling flash
Present code checks for update_flash_data in opal_flash_term_callback().
update_flash_data has been statically initialized to zero, and that
is the value of FLASH_IMG_READY. Also code update initialization happens
during subsys init.
So if reboot is issued before the subsys init stage then we endup displaying
"Flashing new firmware" message.. which may confuse end user.
This patch fixes above described issue by initializes update_flash status
to invalid state.
Reported-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tyrel Datwyler [Thu, 5 Mar 2015 02:25:38 +0000 (18:25 -0800)]
powerpc/pseries: Introduce api_version to migration sysfs interface
The /sys/kernel/mobility/migration interface was added all the way back
in 2.6.37. However, the drmgr userspace tool was never augmented to use
this interface to perfrom migrations. Instead it has continued using a
faux rtas call coupled with performing the device tree update processing
in userspace and communicating it back to the kernel via the ugly
/proc/ppc64/ofdt interface.
Up until 3.12 the device tree update code in the kernel was badly broken
and bit rotting. This code was fixed in 3.12 and is now utilized by the
kernel suspend code as of 3.15. The kernel is now better suited to
handle the post-mobility fixup of the device tree and drmgr should be
transitioned to using the sysfs migration interface.
This patch introduces the api_version sysfs file to /sys/kernel/mobility
as a means for drmgr to query the current implementation level of the
kernel migration code. This initial versioning indicates it is capable
of perfroming all current PAPR requirements for migration including the
post-mobility firmware activation and device tree update.
Scott Wood [Thu, 12 Mar 2015 03:13:46 +0000 (22:13 -0500)]
powerpc/32: %pF is only for function pointers
Use %pS for actual addresses, otherwise you'll get bad output
on arches like ppc64 where %pF expects a function descriptor. Even on
other architectures, refrain from setting a bad example that people
copy.
Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fabian Frederick [Wed, 11 Mar 2015 19:13:34 +0000 (20:13 +0100)]
powerpc: use kbuild generic-y where possible
Replace one line asm-generic include files declared in
arch/powerpc/include/asm/ by generic-y declaration
which creates arch/powerpc/include/generated/asm equivalent.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Thu, 19 Mar 2015 23:10:18 +0000 (10:10 +1100)]
powerpc/powernv: Fix return value from power7_nap() et al.
The power7_nap(), power7_sleep() and power7_winkle() functions are
called from pnv_smp_cpu_kill_self(), which expects them to return the
SRR1 value set by the hardware on wakeup, or 0 if no nap/sleep/winkle
occurred. However, in the case where an interrupt needs to be
replayed, the logic in power7_powersave_common (the common code for
power7_nap et al.) doesn't set r3 to 0 in this case. Instead what we
get as the return value is the selector for the type of power-saving
mode requested (1, 2 or 3). In fact this should not affect the
operation of pnv_smp_cpu_kill_self(), but it is better to get this
correct, so this adds an instruction to set r3 to 0 in this case.
Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Stephen Rothwell [Wed, 18 Mar 2015 05:46:16 +0000 (16:46 +1100)]
powerpc: Convert relocs_check to a shell script using grep
This runs a bit faster and removes another use of perl from
the kernel build.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-By: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Hari Bathini [Thu, 5 Feb 2015 19:36:52 +0000 (01:06 +0530)]
powerpc/powernv: Add pstore support on powernv
This patch extends pstore, a generic interface to platform dependent
persistent storage, support for powernv platform to capture certain
useful information, during dying moments. Such support is already in
place for pseries platform. This patch re-uses most of that code.
It is a common practice to compile kernels with both CONFIG_PPC_PSERIES=y
and CONFIG_PPC_POWERNV=y. The code in nvram_init_oops_partition() routine
still works as intended, as the caller is platform specific code which
passes the appropriate value for "rtas_partition_exists" parameter.
In all other places, where CONFIG_PPC_PSERIES or CONFIG_PPC_POWERNV
flag is used in this patchset, it is to reduce the kernel size in cases
where this flag is not set and doesn't have any impact logic wise.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Hari Bathini [Thu, 5 Feb 2015 19:36:28 +0000 (01:06 +0530)]
pstore: Add pstore type id for PPC64 opal nvram partition
This patch adds a new PPC64 partition type to be used for opal
specific nvram partition. A new partition type is needed as none
of the existing type matches this partition type.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Hari Bathini [Thu, 5 Feb 2015 19:36:04 +0000 (01:06 +0530)]
powerpc/nvram: Move generic code for nvram and pstore
With minor checks, we can move most of the code for nvram
under pseries to a common place to be re-used by other
powerpc platforms like powernv. This patch moves such
common code to arch/powerpc/kernel/nvram_64.c file.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
[mpe: Move select of ZLIB_DEFLATE to PPC64 to fix the build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/numa: Reset node_possible_map to only node_online_map
Raghu noticed an issue with excessive memory allocation on power with a
simple cgroup test, specifically, in mem_cgroup_css_alloc ->
for_each_node -> alloc_mem_cgroup_per_zone_info(), which ends up blowing
up the kmalloc-2048 slab (to the order of 200MB for 400 cgroup
directories).
The underlying issue is that NODES_SHIFT on power is 8 (256 NUMA nodes
possible), which defines node_possible_map, which in turn defines the
value of nr_node_ids in setup_nr_node_ids and the iteration of
for_each_node.
In practice, we never see a system with 256 NUMA nodes, and in fact, we
do not support node hotplug on power in the first place, so the nodes
that are online when we come up are the nodes that will be present for
the lifetime of this kernel. So let's, at least, drop the NUMA possible
map down to the online map at runtime. This is similar to what x86 does
in its initialization routines.
mem_cgroup_css_alloc should also be fixed to only iterate over
memory-populated nodes and handle hotplug, but that is a separate
change.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Wed, 18 Mar 2015 01:02:41 +0000 (12:02 +1100)]
selftests/powerpc: Rename TARGETS in powerpc selftests makefile
This patch changes the name of the make variable TARGETS, to prevent it
from colliding with a value set by the user on the command line (as they
are recommended to do by tools/testing/selftests/README.txt).
Without this patch, "make -C tools/testing/selftests TARGETS=powerpc"
will fail.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Greg Kurz [Mon, 23 Feb 2015 15:14:44 +0000 (16:14 +0100)]
selftests/powerpc: Add test for VPHN
The goal is to verify vphn_unpack_associativity() parses VPHN numbers
correctly. We feed it with a variety of input values and compare with
expected results.
PAPR+ does not say much about VPHN parsing: I came up with a list of
tests that check many simple cases and some corner ones. I wouldn't
dare to say the list is exhaustive though.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[mpe: Rework harness logic, rename to test-vphn, add -m64] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Greg Kurz [Mon, 23 Feb 2015 15:14:37 +0000 (16:14 +0100)]
powerpc/vphn: parsing code rewrite
The current VPHN parsing logic has some flaws that this patch aims to fix:
1) when the value 0xffff is read, the value 0xffffffff gets added to the
the output list and its element count isn't incremented. This is wrong.
According to PAPR+ the domain identifiers are packed into a sequence
terminated by the "reserved value of all ones". This means that 0xffff
is a stream terminator.
2) the combination of byteswaps and casts make the code hardly readable.
Let's parse the stream one 16-bit field at a time instead.
3) it is assumed that the hypercall returns 12 32-bit values packed into
6 64-bit registers. According to PAPR+, the domain identifiers may be
streamed as 16-bit values. Let's increase the number of expected numbers
to 24.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Greg Kurz [Mon, 23 Feb 2015 15:14:31 +0000 (16:14 +0100)]
powerpc/vphn: move VPHN parsing logic to a separate file
The goal behind this patch is to be able to write userland tests for the
VPHN parsing code.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Greg Kurz [Mon, 23 Feb 2015 15:14:25 +0000 (16:14 +0100)]
powerpc/vphn: move endianness fixing to vphn_unpack_associativity()
The first argument to vphn_unpack_associativity() is a const long *, but the
parsing code expects __be64 values actually. Let's move the endian fixing
down for consistency.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:50 +0000 (20:32 +0800)]
powerpc: kill PPC_OF
We have set CONFIG_PPC_OF to always 'y' in commit 0a498d96a332
("powerpc: set CONFIG_PPC_OF=y always for ARCH=powerpc") nine years
ago. And the arch/ppc also has gone away for many years. The OF
functionality was also moved to a common place and be used by many
archs. So it does make no sense to keep such a option in the current
kernel. Just kill it.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:49 +0000 (20:32 +0800)]
fbdev: kconfig: replace PPC_OF with PPC
The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:48 +0000 (20:32 +0800)]
fbdev: remove the unnecessary includes of ppc specific header files
In the current kernel, we don't need to include these arch specific
header files for ppc.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:47 +0000 (20:32 +0800)]
fbdev: riva: remove the dependency on PPC_OF
The OF functionality has moved to a common place and be used by many
archs. So we don't need to include the ppc arch specific header files
and depend on PPC_OF option any more. This is a preparation for
killing PPC_OF.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:46 +0000 (20:32 +0800)]
fbdev: nvidia: remove the dependency on PPC_OF
The OF functionality has moved to a common place and be used by many
archs. So we don't need to include the ppc arch specific header files
and depend on PPC_OF option any more. This is a preparation for
killing PPC_OF.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:45 +0000 (20:32 +0800)]
fbdev: imsttfb: remove the dependency on PPC_OF
The OF functionality has moved to a common place and be used by many
archs. So we don't need to depend on PPC_OF option any more. This is
a preparation for killing PPC_OF.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:44 +0000 (20:32 +0800)]
fbdev: radeon: replace PPC_OF with PPC
The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:43 +0000 (20:32 +0800)]
fbdev: aty128fb: replace PPC_OF with PPC
The PPC_OF is a ppc specific option which is used to mean that the
firmware device tree access functions are available. Since all the
ppc platforms have a device tree, it is aways set to 'y' for ppc.
So it makes no sense to keep a such option in the current kernel.
Replace it with PPC.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kevin Hao [Thu, 12 Mar 2015 12:32:42 +0000 (20:32 +0800)]
sata_svw: remove the dependency on PPC_OF
The OF functionality has moved to a common place and be used by many
archs. So we don't need to include the ppc arch specific header files
and depend on PPC_OF option any more. This is a preparation for
killing PPC_OF.
Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 17 Mar 2015 04:16:12 +0000 (15:16 +1100)]
selftests/powerpc: Build the copyloops with -maltivec
The recent change to remove the vrX defines exposed the fact that we are
building the copyloops tests without altivec enabled. It depends on the
toolchain as to whether altivec is on by default or not, so it only
breaks on some toolchains. But we should always enable it.
Fixes: c2ce6f9f3dc0 ("powerpc: Change vrX register defines to vX to match gcc and glibc") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Phil Carmody [Tue, 16 Sep 2014 22:00:54 +0000 (01:00 +0300)]
powerpc/via-pmu: fix OF node leak in Keylargo init
If we of_find_node_by_name() then we must of_node_put() too.
Signed-off-by: Phil Carmody <pc+lkml@asdf.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Phil Carmody [Tue, 16 Sep 2014 22:00:53 +0000 (01:00 +0300)]
powerpc/via-pmu: fix error path in find_via_pmu()
Cleanup was not in the reverse order from the set-up, so not all
the gotos made sense, and also it was being avoided completely upon
failure of init_pmu().
Signed-off-by: Phil Carmody <pc+lkml@asdf.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These functions are only used from one place each. If the cacheable_*
versions really are more efficient, then those changes should be
migrated into the common code instead.
NOTE: The old routines are just flat buggy on kernels that support
hardware with different cacheline sizes.
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/book3s: Fix flush_tlb cpu_spec hook to take a generic argument.
The flush_tlb hook in cpu_spec was introduced as a generic function hook
to invalidate TLBs. But the current implementation of flush_tlb hook
takes IS (invalidation selector) as an argument which is architecture
dependent. Hence, It is not right to have a generic routine where caller
has to pass non-generic argument.
This patch fixes this and makes flush_tlb hook as high level API.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We'll need at least 32 bytes in the initial stack frame, to handle the
LR save area. We bump this to 112 bytes, as that'll be the max required
by ABIv1.
Thanks to Alistair Popple for debugging help.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Jeremy Kerr [Wed, 11 Feb 2015 04:55:44 +0000 (12:55 +0800)]
powerpc/boot/wrapper: use the pseries wrapper for zImage.epapr
We'll likely be entering the zImage.epapr as BE, so include the pseries
implementation of _zimage_start, which adds the endian fixup magic.
Although the endian fixup won't work on Book III-E machines starting LE,
the current entry point doesn't support LE anyway, so we shouldn't be
breaking anything.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Jeremy Kerr [Wed, 11 Feb 2015 04:55:44 +0000 (12:55 +0800)]
powerpc/boot/fdt: Add little-endian support to libfdt wrappers
For epapr-style boot, we may be little-endian. This change implements
the proper conversion for fdt*_to_cpu and cpu_to_fdt*. We also need the
full cpu_to_* and *_to_cpu macros for this.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Arseny Solokha [Tue, 24 Feb 2015 09:05:06 +0000 (16:05 +0700)]
powerpc/mpic: remove unused functions
Drop unused fsl_mpic_primary_get_version(), mpic_set_clk_ratio(),
mpic_set_serial_int().
+ fsl_mpic_primary_get_version() is just a safe wrapper around
fsl_mpic_get_version() for SMP configurations. While the latter is
called explicitly for handling PIC initialization and setting up error
interrupt vector depending on PIC hardware version, the former isn't
used for anything.
+ As for mpic_set_clk_ratio() and mpic_set_serial_int(), they both are
almost nine years old[1] but still have no chance to be called even from
out-of-tree modules because they both are __init and of course aren't
exported.
Arseny Solokha [Tue, 24 Feb 2015 09:05:05 +0000 (16:05 +0700)]
powerpc/qe: drop unused ucc_slow_poll_transmitter_now
Drop ucc_slow_poll_transmitter_now() which has no users since its
inception in 2007 in commit 986585385131 ("[POWERPC] Add QUICC
Engine (QE) infrastructure").
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Arseny Solokha [Tue, 24 Feb 2015 09:05:03 +0000 (16:05 +0700)]
powerpc/boot: drop planetcore_set_serial_speed
Drop planetcore_set_serial_speed() which had no users since its
inception in commit fec6047047fd ("[POWERPC] bootwrapper: Add PlanetCore
firmware support") in 2007.
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 17 Feb 2015 09:01:55 +0000 (20:01 +1100)]
powerpc/powernv: Remove unused definitions in opal-api.h
This removes definitions in opal-api.h that are completely unused in
Linux.
For each of these I see three possibilities, 1) we *should* be using
them in Linux and patches will arrive to do that, 2) they are not used
but should stay in the header to document the API for some important
reason, 3) they are not used and needn't be part of the API.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Michael Ellerman [Tue, 17 Feb 2015 09:01:54 +0000 (20:01 +1100)]
powerpc/powernv: Move opal-api.h closer to the Skiboot version
This commit gets opal-api.h to mostly match the version in Skiboot as of
commit ea7d806ab0ba.
The exceptions are things which are not (currently) used in Linux.
Most of this is just whitespace and a few things moving around. I think
the diff is readable.
Also OpalMessageType became opal_msg_type, requiring a change in the
Linux code.
Finally Skiboot and Linux disagree on CAPI vs CXL, because CAPI means
something else in Linux. To handle that we just point the Linux wrapper,
which is named "cxl" to the OPAL token OPAL_PCI_SET_PHB_CAPI_MODE.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Stewart Smith [Thu, 12 Feb 2015 05:25:29 +0000 (16:25 +1100)]
powerpc/powernv: only call OPAL_RESEND_DUMP if firmware supports it
Not all OPAL platforms support resending system dumps, so check
that current firmware supports it first. Otherwise we get firmware
complaining:
"OPAL: Called with bad token 91 !"
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Stewart Smith [Thu, 12 Feb 2015 05:25:28 +0000 (16:25 +1100)]
powerpc/powernv: only call OPAL_ELOG_RESEND if firmware supports it
Otherwise firmware complains: "OPAL: Called with bad token 74 !"
as not all OPAL systems have the ability to resend error logs.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Stewart Smith [Thu, 12 Feb 2015 05:25:27 +0000 (16:25 +1100)]
powerpc/powernv: only register log if OPAL supports doing so
Correct use of REGISTER/UNREGISTER is to check if the token exists
before calling. If we don't we get a "OPAL: Called with bad token 101 !"
error, which is harmless but may be alarming to some.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Mon, 9 Feb 2015 22:51:23 +0000 (09:51 +1100)]
powerpc: Change vsrX register defines to vsX to match gcc and glibc
As our various loops (copy, string, crypto etc) get more complicated,
we want to share implementations between userspace (eg glibc) and
the kernel. We also want to write userspace test harnesses to put
in tools/testing/selftest.
One gratuitous difference between userspace and the kernel is the
VSX register definitions - the kernel uses vsrX whereas gcc uses
vsX.
Change the kernel to match userspace.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Mon, 9 Feb 2015 22:51:22 +0000 (09:51 +1100)]
powerpc: Change vrX register defines to vX to match gcc and glibc
As our various loops (copy, string, crypto etc) get more complicated,
we want to share implementations between userspace (eg glibc) and
the kernel. We also want to write userspace test harnesses to put
in tools/testing/selftest.
One gratuitous difference between userspace and the kernel is the
VMX register definitions - the kernel uses vrX whereas both gcc and
glibc use vX.
Change the kernel to match userspace.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Sun, 15 Mar 2015 22:07:08 +0000 (15:07 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clock framework fixes from Michael Turquette:
"The clk fixes for 4.0-rc4 comprise three themes.
First are the usual driver fixes for new regressions since v3.19.
Second are fixes to the common clock divider type caused by recent
changes to how we round clock rates. This affects many clock drivers
that use this common code.
Finally there are fixes for drivers that improperly compared struct
clk pointers (drivers must not deref these pointers). While some of
these drivers have done this for a long time, this did not cause a
problem until we started generating unique struct clk pointers for
every consumer. A new function, clk_is_match was introduced to get
these drivers working again and they are fixed up to no longer deref
the pointers themselves"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
ASoC: kirkwood: fix struct clk pointer comparing
ASoC: fsl_spdif: fix struct clk pointer comparing
ARM: imx: fix struct clk pointer comparing
clk: introduce clk_is_match
clk: don't export static symbol
clk: divider: fix calculation of initial best divider when rounding to closest
clk: divider: fix selection of divider when rounding to closest
clk: divider: fix calculation of maximal parent rate for a given divider
clk: divider: return real rate instead of divider value
clk: qcom: fix platform_no_drv_owner.cocci warnings
clk: qcom: fix platform_no_drv_owner.cocci warnings
clk: qcom: Add PLL4 vote clock
clk: qcom: lcc-msm8960: Fix PLL rate detection
clk: qcom: Fix slimbus n and m val offsets
clk: ti: Fix FAPLL parent enable bit handling
Krzysztof Kolasa [Sun, 15 Mar 2015 19:22:36 +0000 (20:22 +0100)]
[PATCH] drm/mm: Fix support 4 GiB and larger ranges
bad argument if(tmp)... in check_free_hole
fix oops: kernel BUG at drivers/gpu/drm/drm_mm.c:305!
[airlied: excellent, this was my task for today].
Signed-off-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Sun, 15 Mar 2015 17:49:38 +0000 (10:49 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a rather unpleasantly large set of bug fixes for arm-soc, Most
of them because of cross-tree dependencies for Exynos where we should
have figured out the right path to merge things before the merge
window, and then the maintainer being unable to sort things out in
time during a business trip.
The other changes contained here are the usual collection:
MAINTAINERS file updates
- Gregory Clement is now a co-maintainer for the legacy Marvell EBU
platforms
- A MAINTAINERS entry for the Freescale Vybrid platform that was
added last year
- Matt Porter no longer works as a maintainer on Broadcom SoCs
Build-time issues
- A compile-time error for at91
- Several minor DT fixes on at91, imx, exynos, socfpga, and omap
- The new digicolor platform was not correctly enabled at all
Configuration issues
- Two defconfig fix for regressions using USB on versatile express
and on OMAP3
- Enabling all 8 CPUs on Allwinner/SUNxi
- Enabling the new STiH410 platform to be usable
Bug fixes in platform code
- A missing barrier for socfpga
- Fixing LPDDR1 self-refresh mode on at91
- Fixing RTC interrupt numbers on Exynos3250
- Fixing a cache-coherency issues in CPU power-down on Exynos5
- Multiple small OMAP power management fixes"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (69 commits)
MAINTAINERS: Add myself as co-maintainer to the legacy support of the mvebu SoCs
ARM: at91: pm_slowclock: fix the compilation error
ARM: at91/dt: fix USB high-speed clock to select UTMI
ARM: at91/dt: fix at91 udc compatible strings
ARM: at91/dt: declare matrix node as a syscon device
ARM: vexpress: update CONFIG_USB_ISP1760 option
ARM: digicolor: add the machine directory to Makefile
ARM: STi: Add STiH410 SoC support
MAINTAINERS: add Freescale Vybrid SoC
MAINTAINERS: Remove self as ARM mach-bcm co-maintainer
ARM: imx6sl-evk: set swbst_reg as vbus's parent reg
ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg
ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition
ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot
ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig
ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines
ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl
ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding
ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding
ARM: dts: OMAP5: fix polling intervals for thermal zones
...
Linus Torvalds [Sun, 15 Mar 2015 17:41:30 +0000 (10:41 -0700)]
Merge tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux
Pull irqchip fixes from Jason Cooper:
"armada-370-xp:
- Chained per-cpu interrupts
gic{,-v3,v3-its}"
- Various fixes for safer operation"
* tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux:
irqchip: gicv3-its: Support safe initialization
irqchip: gicv3-its: Define macros for GITS_CTLR fields
irqchip: gicv3-its: Add limitation to page order
irqchip: gicv3-its: Use 64KB page as default granule
irqchip: gicv3-its: Zero itt before handling to hardware
irqchip: gic-v3: Fix out of bounds access to cpu_logical_map
irqchip: gic: Fix unsafe locking reported by lockdep
irqchip: gicv3-its: Fix unsafe locking reported by lockdep
irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration
irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID
irqchip: gicv3-its: Fix ITS CPU init
irqchip: armada-370-xp: Fix chained per-cpu interrupts
Linus Torvalds [Sat, 14 Mar 2015 21:54:25 +0000 (14:54 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Misc i915, vmwgfx and radeon fixes along with a fix for one of those
recursive sleep mutex debug cases in the mst code"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix an issue with the device losing its irq line on module unload
drm/vmwgfx: Correctly NULLify dma buffer pointer on failure
drm/vmwgfx: Reorder device takedown somewhat
drm/vmwgfx: Fix a couple of lock dependency violations
drm/radeon: drop setting UPLL to sleep mode
drm/radeon: fix wait to actually occur after the signaling callback
drm/i915: Prevent TLB error on first execution on SNB
drm/i915: Do both mt and gen6 style forcewake reset on ivb probe
drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again
drm/i915: use in_interrupt() not in_irq() to check context
drm/mst: fix recursive sleep warning on qlock
drm: Don't assign fbs for universal cursor support to files
Linus Torvalds [Sat, 14 Mar 2015 21:23:50 +0000 (14:23 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"This is a simple fix for a domain revalidation crash which has
recently turned up in the libsas code (applies to mvsas, isc and
aic94xx)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
libsas: Fix Kernel Crash in smp_execute_task
Linus Torvalds [Sat, 14 Mar 2015 16:32:00 +0000 (09:32 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- add TLB invalidation for page table tear-down which was missed when
support for CONFIG_HAVE_RCU_TABLE_FREE was added (assuming page table
freeing was always deferred)
- use UEFI for system and reset poweroff if available
- fix asm label placement in relation to the alignment statement
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: put __boot_cpu_mode label after alignment instead of before
efi/arm64: use UEFI for system reset and poweroff
arm64: Invalidate the TLB corresponding to intermediate page table levels
Linus Torvalds [Sat, 14 Mar 2015 16:26:23 +0000 (09:26 -0700)]
Merge tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"selftests/exec: Check if the syscall exists and bail if not"
* tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/exec: Check if the syscall exists and bail if not
Catalin Marinas [Wed, 11 Mar 2015 12:20:39 +0000 (12:20 +0000)]
arm64: Invalidate the TLB corresponding to intermediate page table levels
The ARM architecture allows the caching of intermediate page table
levels and page table freeing requires a sequence like:
pmd_clear()
TLB invalidation
pte page freeing
With commit 5e5f6dc10546 (arm64: mm: enable HAVE_RCU_TABLE_FREE logic),
the page table freeing batching was moved from tlb_remove_page() to
tlb_remove_table(). The former takes care of TLB invalidation as this is
also shared with pte clearing and page cache page freeing. The latter,
however, does not invalidate the TLBs for intermediate page table levels
as it probably relies on the architecture code to do it if required.
When the mm->mm_users < 2, tlb_remove_table() does not do any batching
and page table pages are freed before tlb_finish_mmu() which performs
the actual TLB invalidation.
This patch introduces __tlb_flush_pgtable() for arm64 and calls it from
the {pte,pmd,pud}_free_tlb() directly without relying on deferred page
table freeing.
Fixes: 5e5f6dc10546 arm64: mm: enable HAVE_RCU_TABLE_FREE logic Reported-by: Jon Masters <jcm@redhat.com> Tested-by: Jon Masters <jcm@redhat.com> Tested-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Fri, 13 Mar 2015 21:30:38 +0000 (14:30 -0700)]
Merge tag 'pm+acpi-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Just two fixes, one for an ACPI LPSS driver issue introduced during
the 3.17 cycle and one revert of a recent commit that sort of broke
the cpupower tool.
Specifics:
- Fix an ACPI LPSS (Low-Power Subsystem) driver issue causing the
8250_dw driver to confuse an LPSS clock with another one it is
supposed to handle due to the lack of identification allowing it to
tell those clocks apart (Heikki Krogerus).
- Revert a recent commit that was supposed to improve the usability
of the cpupower tool, but clearly did the opposite (Josh Boyer)"
* tag 'pm+acpi-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "cpupower Makefile change to help run the tool without 'make install'"
ACPI / LPSS: provide con_id for the clkdev
Linus Torvalds [Fri, 13 Mar 2015 20:34:38 +0000 (13:34 -0700)]
Merge tag 'stable/for-linus-4.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- fix a PV regression in 3.19.
- fix a dom0 crash on hosts with large numbers of PIRQs.
- prevent pcifront from disabling memory or I/O port access, which may
trigger host crashes.
* tag 'stable/for-linus-4.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: limit guest control of command register
xen/events: avoid NULL pointer dereference in dom0 on large machines
xen: Remove trailing semicolon from xenbus_register_frontend() definition
x86/xen: correct bug in p2m list initialization
Linus Torvalds [Fri, 13 Mar 2015 20:30:00 +0000 (13:30 -0700)]
Merge tag 'sound-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This is a round of HD-audio fixes: there are a long-standing
regression fix and a few more device/codec-specific quirks.
In addition, a couple of FireWire regression fixes, a USB-audio quirk
for Roland UA-22 and a sanity check in API for user-defined control
elements"
* tag 'sound-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Don't access stereo amps for mono channel widgets
ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic
ALSA: hda - Set single_adc_amp flag for CS420x codecs
ALSA: snd-usb: add quirks for Roland UA-22
ALSA: control: Add sanity checks for user ctl id name string
ALSA: hda - Fix built-in mic on Compaq Presario CQ60
ALSA: firewire-lib: leave unit reference counting completely
Revert "ALSA: dice: fix wrong offsets for Dice interface"
ALSA: hda - Fix regression of HD-audio controller fallback modes
Linus Torvalds [Fri, 13 Mar 2015 18:10:10 +0000 (11:10 -0700)]
Merge tag 'devicetree-fixes-for-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix for stdout-path option parsing with added unittest
- fix for stdout-path interaction with earlycon
- several DT unittest fixes
- fix Sparc allmodconfig build error on of_platform_register_reconfig_notifier
- several DT overlay kconfig and build warning fixes
- several DT binding documentation updates
* tag 'devicetree-fixes-for-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/platform: Fix sparc:allmodconfig build
of: unittest: Add options string testcase variants
of: fix handling of '/' in options for of_find_node_by_path()
of/unittest: Fix the wrong expected value in of_selftest_property_string
of/unittest: remove the duplicate of_changeset_init
dt: submitting-patches: clarify that DT maintainers are to be cced on bindings
of: unittest: fix I2C dependency
of/overlay: Remove unused variable
Documentation: DT: Renamed of-serial.txt to 8250.txt
of: Fix premature bootconsole disable with 'stdout-path'
serial: add device tree binding documentation for ETRAX FS UART
of/overlay: Directly include idr.h
of: Drop superfluous dependance for OF_OVERLAY
of: Add vendor prefix for Arasan
of: Add prompt for OF_OVERLAY config
Linus Torvalds [Fri, 13 Mar 2015 17:55:32 +0000 (10:55 -0700)]
Merge branch 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull gadgetfs fixes from Al Viro:
"Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles
caused by ->f_op flipping"
* 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gadgetfs: really get rid of switching ->f_op
gadgetfs: get rid of flipping ->f_op in ep_config()
gadget: switch ep_io_operations to ->read_iter/->write_iter
gadgetfs: use-after-free in ->aio_read()
gadget/function/f_fs.c: switch to ->{read,write}_iter()
gadget/function/f_fs.c: use put iov_iter into io_data
gadget/function/f_fs.c: close leaks
move iov_iter.c from mm/ to lib/
new helper: dup_iter()
Guenter Roeck [Wed, 11 Mar 2015 03:31:04 +0000 (20:31 -0700)]
of/platform: Fix sparc:allmodconfig build
sparc:allmodconfig fails to build with:
drivers/built-in.o: In function `platform_bus_init':
(.init.text+0x3684): undefined reference to `of_platform_register_reconfig_notifier'
of_platform_register_reconfig_notifier is only declared if both OF_ADDRESS
and OF_DYNAMIC are configured. Yet, the include file only declares a dummy
function if OF_DYNAMIC is not configured. The sparc architecture does not
configure OF_ADDRESS, but does configure OF_DYNAMIC, causing above error.
Fixes: 801d728c10db ("of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type") Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rob Herring <robh@kernel.org>
The current HDA generic parser initializes / modifies the amp values
always in stereo, but this seems causing the problem on ALC3229 codec
that has a few mono channel widgets: namely, these mono widgets react
to actions for both channels equally.
In the driver code, we do care the mono channel and create a control
only for the left channel (as defined in HD-audio spec) for such a
node. When the control is updated, only the left channel value is
changed. However, in the resume, the right channel value is also
restored from the initial value we took as stereo, and this overwrites
the left channel value. This ends up being the silent output as the
right channel has been never touched and remains muted.
This patch covers the places where unconditional stereo amp accesses
are done and converts to the conditional accesses.
Linus Torvalds [Fri, 13 Mar 2015 01:46:19 +0000 (18:46 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
memcg: disable hierarchy support if bound to the legacy cgroup hierarchy
mm: reorder can_do_mlock to fix audit denial
kasan, module: move MODULE_ALIGN macro into <linux/moduleloader.h>
kasan, module, vmalloc: rework shadow allocation for modules
fanotify: fix event filtering with FAN_ONDIR set
mm/nommu.c: export symbol max_mapnr
arch/c6x/include/asm/pgtable.h: define dummy pgprot_writecombine for !MMU
nilfs2: fix deadlock of segment constructor during recovery
mm: cma: fix CMA aligned offset calculation
mm, hugetlb: close race when setting PageTail for gigantic pages
mm, oom: do not fail __GFP_NOFAIL allocation if oom killer is disabled
drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC data
ocfs2: make append_dio an incompat feature
Vladimir Davydov [Thu, 12 Mar 2015 23:26:19 +0000 (16:26 -0700)]
memcg: disable hierarchy support if bound to the legacy cgroup hierarchy
If the memory cgroup controller is initially mounted in the scope of the
default cgroup hierarchy and then remounted to a legacy hierarchy, it will
still have hierarchy support enabled, which is incorrect. We should
disable hierarchy support if bound to the legacy cgroup hierarchy.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A userspace call to mmap(MAP_LOCKED) may result in the successful locking
of memory while also producing a confusing audit log denial. can_do_mlock
checks capable and rlimit. If either of these return positive
can_do_mlock returns true. The capable check leads to an LSM hook used by
apparmour and selinux which produce the audit denial. Reordering so
rlimit is checked first eliminates the denial on success, only recording a
denial when the lock is unsuccessful as a result of the denial.
Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Paul Cassella <cassella@cray.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Thu, 12 Mar 2015 23:26:14 +0000 (16:26 -0700)]
kasan, module: move MODULE_ALIGN macro into <linux/moduleloader.h>
include/linux/moduleloader.h is more suitable place for this macro.
Also change alignment to PAGE_SIZE for CONFIG_KASAN=n as such
alignment already assumed in several places.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Thu, 12 Mar 2015 23:26:11 +0000 (16:26 -0700)]
kasan, module, vmalloc: rework shadow allocation for modules
Current approach in handling shadow memory for modules is broken.
Shadow memory could be freed only after memory shadow corresponds it is no
longer used. vfree() called from interrupt context could use memory its
freeing to store 'struct llist_node' in it:
void vfree(const void *addr)
{
...
if (unlikely(in_interrupt())) {
struct vfree_deferred *p = this_cpu_ptr(&vfree_deferred);
if (llist_add((struct llist_node *)addr, &p->list))
schedule_work(&p->wq);
Later this list node used in free_work() which actually frees memory.
Currently module_memfree() called in interrupt context will free shadow
before freeing module's memory which could provoke kernel crash.
So shadow memory should be freed after module's memory. However, such
deallocation order could race with kasan_module_alloc() in module_alloc().
Free shadow right before releasing vm area. At this point vfree()'d
memory is not used anymore and yet not available for other allocations.
New VM_KASAN flag used to indicate that vm area has dynamically allocated
shadow memory so kasan frees shadow only if it was previously allocated.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With FAN_ONDIR set, the user can end up getting events, which it hasn't
marked. This was revealed with fanotify04 testcase failure on
Linux-4.0-rc1, and is a regression from 3.19, revealed with 66ba93c0d7fe6
("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask").
# /opt/ltp/testcases/bin/fanotify04
[ ... ]
fanotify04 7 TPASS : event generated properly for type 100000
fanotify04 8 TFAIL : fanotify04.c:147: got unexpected event 30
fanotify04 9 TPASS : No event as expected
The testcase sets the adds the following marks : FAN_OPEN | FAN_ONDIR for
a fanotify on a dir. Then does an open(), followed by close() of the
directory and expects to see an event FAN_OPEN(0x20). However, the
fanotify returns (FAN_OPEN|FAN_CLOSE_NOWRITE(0x10)). This happens due to
the flaw in the check for event_mask in fanotify_should_send_event() which
does:
if (event_mask & marks_mask & ~marks_ignored_mask)
return true;
Fix this by masking the outgoing events to the user, as we already take
care of FAN_ONDIR and FAN_EVENT_ON_CHILD.
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com> Tested-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / karo-tx-linux.git / log