]>
git.kernelconcepts.de Git - karo-tx-uboot.git/log
Lothar Waßmann [Fri, 6 Dec 2013 09:21:49 +0000 (10:21 +0100)]
karo: tx48: add compatible for gpmc nand in Linux kernel >= 3.8-rc3
Lothar Waßmann [Fri, 6 Dec 2013 09:19:20 +0000 (10:19 +0100)]
karo: tx48: make 'struct node_info' static
Lothar Waßmann [Mon, 2 Dec 2013 13:40:08 +0000 (14:40 +0100)]
karo: tx53: don't print decimals for voltages
Lothar Waßmann [Mon, 2 Dec 2013 13:39:42 +0000 (14:39 +0100)]
karo: tx53: set clk_rate_low for LDO2 only
Lothar Waßmann [Mon, 2 Dec 2013 13:33:29 +0000 (14:33 +0100)]
karo: tx53: don't enable burst mode for buck-boost
Lothar Waßmann [Mon, 2 Dec 2013 13:31:31 +0000 (14:31 +0100)]
karo: tx53: check for <CTRL-C> only to abort certain actions
Lothar Waßmann [Fri, 29 Nov 2013 16:49:08 +0000 (17:49 +0100)]
lcd: splashscreen: fix broken bmp8 format
Lothar Waßmann [Thu, 28 Nov 2013 14:39:17 +0000 (15:39 +0100)]
karo: tx48: move 'dtb' partition just before 'bbt'
Lothar Waßmann [Thu, 28 Nov 2013 12:00:02 +0000 (13:00 +0100)]
karo: tx48: fix U-Boot heartbeat LED
Add missing call to gpio_request_array(stk5_gpios) that has been lost
somehow. Also call to gpio_request_array() before calling
tx48_set_pin_mux() to prevent glitches when reconfiguring pin
functions.
Lothar Waßmann [Thu, 28 Nov 2013 11:09:59 +0000 (12:09 +0100)]
karo: tx48: remove useless MUX_CFG() macro
Lothar Waßmann [Thu, 28 Nov 2013 11:05:56 +0000 (12:05 +0100)]
karo: tx48: check for <CTRL-C> only to abort certain actions
Explicitly check for <CTRL-C> rather than keypress to abort loading
DTB, setting cpu_clk and enabling display/loading splashscreen to be
able to abort the boot script without affecting the other operations.
Lothar Waßmann [Thu, 28 Nov 2013 11:04:44 +0000 (12:04 +0100)]
karo: tx48: remove non-DT config
remove -dt suffix from board name and define CONFIG_OF_LIBFDT in
include/configs/tx48.h rather than boards.cfg
Lothar Waßmann [Thu, 28 Nov 2013 11:03:52 +0000 (12:03 +0100)]
karo: tx48: use optimized NAND timing
Lothar Waßmann [Thu, 28 Nov 2013 11:02:38 +0000 (12:02 +0100)]
karo: tx48: enable GPMC prefetch engine
Lothar Waßmann [Thu, 28 Nov 2013 11:02:01 +0000 (12:02 +0100)]
mtd: nand: omap_gpmc: implement GPMC prefetch engine support
Lothar Waßmann [Thu, 28 Nov 2013 10:29:21 +0000 (11:29 +0100)]
mtd: nand: omap_gpmc: misc cleanups
Lothar Waßmann [Thu, 28 Nov 2013 09:42:40 +0000 (10:42 +0100)]
arm: am33xx: remove obsolete include file asm/arch/nand.h
Lothar Waßmann [Fri, 22 Nov 2013 09:01:50 +0000 (10:01 +0100)]
karo: tx48: update video_mode handling
Lothar Waßmann [Fri, 22 Nov 2013 09:01:33 +0000 (10:01 +0100)]
karo: tx48: update Copyright notice
Lothar Waßmann [Thu, 21 Nov 2013 17:26:27 +0000 (18:26 +0100)]
karo: tx6u: fix definition and setup of UART1 SEL_INPUT register
Lothar Waßmann [Thu, 21 Nov 2013 10:32:27 +0000 (11:32 +0100)]
karo: fdt: check for <CTRL-C> only to abort loading DTB
Lothar Waßmann [Wed, 20 Nov 2013 15:17:59 +0000 (16:17 +0100)]
net: bootme: use is_valid_ether_addr()/is_zero_ether_addr() instead of memcmp()
Lothar Waßmann [Wed, 20 Nov 2013 15:16:44 +0000 (16:16 +0100)]
net: bootme: re-add eth_init() call when eth not active
Lothar Waßmann [Wed, 20 Nov 2013 06:33:00 +0000 (07:33 +0100)]
common: bootce: add missing call to ce_prepare_run_bin() in nbootce
Lothar Waßmann [Thu, 21 Nov 2013 10:24:07 +0000 (11:24 +0100)]
karo: tx6: check for <CTRL-C> only to abort certain actions
Lothar Waßmann [Thu, 21 Nov 2013 09:47:24 +0000 (10:47 +0100)]
karo: tx6: set IO voltage depending on HW rev of TX6
Lothar Waßmann [Thu, 21 Nov 2013 09:44:44 +0000 (10:44 +0100)]
mx6: add fuse bank5 definitions
Lothar Waßmann [Tue, 19 Nov 2013 14:55:25 +0000 (15:55 +0100)]
karo: fdt: print error messages instead of numbers
Lothar Waßmann [Tue, 19 Nov 2013 14:54:51 +0000 (15:54 +0100)]
karo: fdt: set fdtsize to 0 before loading DTB
Lothar Waßmann [Tue, 19 Nov 2013 14:54:17 +0000 (15:54 +0100)]
karo: fdt: use setenv_hex() to set fdtsize variable
Lothar Waßmann [Tue, 19 Nov 2013 14:51:54 +0000 (15:51 +0100)]
karo: fdt: make karo_fdt_load_dtb() an internal function and create empty DTB if none found
Lothar Waßmann [Tue, 19 Nov 2013 14:50:14 +0000 (15:50 +0100)]
karo: fdt: improve display fdt path handling
Lothar Waßmann [Tue, 19 Nov 2013 14:47:51 +0000 (15:47 +0100)]
karo: tx6: romupdate: search a contiguous flash region for U-Boot image
Lothar Waßmann [Tue, 19 Nov 2013 14:46:27 +0000 (15:46 +0100)]
karo: tx6: Add missing GPL header
Lothar Waßmann [Fri, 8 Nov 2013 10:05:06 +0000 (11:05 +0100)]
karo: tx6: changed module suffix from -.xx. to -.x1. for distinction of future eMMC version
Lothar Waßmann [Fri, 8 Nov 2013 09:25:51 +0000 (10:25 +0100)]
karo: prevent video_mode variable from being clobbered by karo_fdt_set_display()
Lothar Waßmann [Tue, 5 Nov 2013 22:11:47 +0000 (23:11 +0100)]
doc: KARO: update FDT handling description
Lothar Waßmann [Tue, 5 Nov 2013 19:36:03 +0000 (20:36 +0100)]
karo: tx53: setup PMIC to use BURST mode for better efficiency
Lothar Waßmann [Mon, 4 Nov 2013 09:00:54 +0000 (10:00 +0100)]
karo: add 'fdtsave' command to default env
Lothar Waßmann [Mon, 4 Nov 2013 08:59:55 +0000 (09:59 +0100)]
karo: remove video parameter from default_bootargs
video mode is now provided via DT.
Lothar Waßmann [Mon, 4 Nov 2013 08:58:08 +0000 (09:58 +0100)]
karo: tx6: cleanup config file
Lothar Waßmann [Mon, 4 Nov 2013 08:57:45 +0000 (09:57 +0100)]
karo: tx6: set I2C speed to 400kHz
Lothar Waßmann [Mon, 4 Nov 2013 08:56:45 +0000 (09:56 +0100)]
karo: tx6: setup PMIC to use BURST mode for better efficiency
Lothar Waßmann [Mon, 4 Nov 2013 08:50:01 +0000 (09:50 +0100)]
Remove a bogus bit set in MAPSR
Lothar Waßmann [Mon, 28 Oct 2013 14:57:28 +0000 (15:57 +0100)]
fdt: karo: add support for LVDS selection via 'video_mode'
Lothar Waßmann [Fri, 25 Oct 2013 12:59:06 +0000 (14:59 +0200)]
dts: karo: remove embedded FDT
The embedded FDT is not really useful because it always will be
outdated as long as the Linux DT bindings are not stable. Thus remove
the embedded FDT to prevent build errors due to incorrect version of
the device-tree-compiler.
Lothar Waßmann [Fri, 25 Oct 2013 12:51:15 +0000 (14:51 +0200)]
dts: tx28: use karo_fdt_fixup_flexcan()
Lothar Waßmann [Fri, 25 Oct 2013 08:33:30 +0000 (10:33 +0200)]
Merge branch 'karo-tx-merge'
Lothar Waßmann [Fri, 25 Oct 2013 08:29:35 +0000 (10:29 +0200)]
fdt: update 'fdtsize' env variable when resizing FDT
Lothar Waßmann [Fri, 25 Oct 2013 08:28:06 +0000 (10:28 +0200)]
karo: tx48: update video mode handling
Lothar Waßmann [Fri, 25 Oct 2013 08:26:13 +0000 (10:26 +0200)]
karo: whitespace cleanup
Lothar Waßmann [Thu, 24 Oct 2013 11:41:37 +0000 (13:41 +0200)]
karo: tx48: read MAC address from fuses in board_late_init()
Lothar Waßmann [Thu, 24 Oct 2013 11:40:45 +0000 (13:40 +0200)]
karo: tx51: read MAC address from fuses in board_late_init()
Lothar Waßmann [Thu, 24 Oct 2013 11:40:36 +0000 (13:40 +0200)]
karo: tx51: remove debug message showing display parameters
Lothar Waßmann [Thu, 24 Oct 2013 11:37:29 +0000 (13:37 +0200)]
karo: tx53: read MAC address from fuses in board_late_init()
Lothar Waßmann [Thu, 24 Oct 2013 11:36:27 +0000 (13:36 +0200)]
karo: tx28s: make FEC1 init solely dependant on DT
Lothar Waßmann [Thu, 24 Oct 2013 11:35:21 +0000 (13:35 +0200)]
karo: tx28s: print message if fecmxc_initialize() fails
Lothar Waßmann [Thu, 24 Oct 2013 11:12:32 +0000 (13:12 +0200)]
karo: tx28: read MAC address from ocotp in board_late_init()
make the output consistent with other modules
Lothar Waßmann [Thu, 24 Oct 2013 11:04:12 +0000 (13:04 +0200)]
karo: tx28: print MAC address from OCOTP
Lothar Waßmann [Thu, 24 Oct 2013 10:58:42 +0000 (12:58 +0200)]
karo: common: check pointer returned by fdt_getprop() before accessing it
Lothar Waßmann [Thu, 24 Oct 2013 10:55:13 +0000 (12:55 +0200)]
mxs: add delay after enabling ENET PLL
otherwise the first accesses to the PHY will fail
Lothar Waßmann [Thu, 24 Oct 2013 09:11:56 +0000 (11:11 +0200)]
karo: tx28: enable PHYLIB support
Lothar Waßmann [Mon, 21 Oct 2013 14:14:01 +0000 (16:14 +0200)]
karo: tx53: fix initialization of panel_info
Lothar Waßmann [Mon, 21 Oct 2013 14:13:51 +0000 (16:13 +0200)]
karo: tx6: fix initialization of panel_info
Lothar Waßmann [Mon, 21 Oct 2013 13:54:02 +0000 (15:54 +0200)]
karo: tx53: use global karo_fdt_fixup_flexcan()
Lothar Waßmann [Mon, 21 Oct 2013 13:53:36 +0000 (15:53 +0200)]
karo: fdt: convert tx6qdl_fixup_flexcan() to global function karo_fdt_fixup_flexcan()
Lothar Waßmann [Mon, 21 Oct 2013 13:52:56 +0000 (15:52 +0200)]
karo: fdt: disable the 'display' node rather than its parent
Lothar Waßmann [Mon, 21 Oct 2013 13:51:50 +0000 (15:51 +0200)]
arm: imx5: remove bogus #if
Lothar Waßmann [Mon, 21 Oct 2013 13:51:18 +0000 (15:51 +0200)]
imx5: fix IPU_SOC_BASE_ADDR and remove unused IPU_SOC_OFFSET
Lothar Waßmann [Mon, 21 Oct 2013 13:49:39 +0000 (15:49 +0200)]
video: lcd: prevent crash when using bmp or splashimage due to unaligned accesses
Thereby sort the Makefile targets alphabetically
Lothar Waßmann [Mon, 21 Oct 2013 13:47:32 +0000 (15:47 +0200)]
imx6: iomux: remove use of NO_PAD_CTRL
Lothar Waßmann [Mon, 21 Oct 2013 13:46:35 +0000 (15:46 +0200)]
i.MX video: move ipuv3_fb_shutdown() to where it is in upstream U-Boot
Lothar Waßmann [Mon, 21 Oct 2013 13:42:34 +0000 (15:42 +0200)]
Merge branch 'tx28-bugfix' into karo-tx-merge
Lothar Waßmann [Mon, 21 Oct 2013 13:42:12 +0000 (15:42 +0200)]
karo: tx28: set variable 'videomode' to convey video mode setting to mxsfb driver
Lothar Waßmann [Mon, 21 Oct 2013 13:41:32 +0000 (15:41 +0200)]
karo: tx28: add missing init of panel_info
Lothar Waßmann [Mon, 21 Oct 2013 13:36:52 +0000 (15:36 +0200)]
Merge branch 'tx51-bugfix' into karo-tx-merge
Lothar Waßmann [Mon, 21 Oct 2013 13:36:32 +0000 (15:36 +0200)]
Merge branch 'tx53-bugfix' into karo-tx-merge
Lothar Waßmann [Mon, 21 Oct 2013 13:36:27 +0000 (15:36 +0200)]
Merge branch 'tx48-bugfix' into karo-tx-merge
Lothar Waßmann [Mon, 21 Oct 2013 13:34:37 +0000 (15:34 +0200)]
karo: tx53: update video mode handling code
Lothar Waßmann [Mon, 21 Oct 2013 13:34:19 +0000 (15:34 +0200)]
karo: tx53: remove useless #if
Lothar Waßmann [Mon, 21 Oct 2013 13:33:54 +0000 (15:33 +0200)]
karo: tx53: fix GPL license text
Lothar Waßmann [Mon, 21 Oct 2013 13:24:49 +0000 (15:24 +0200)]
karo: tx51: update video mode handling code
Lothar Waßmann [Mon, 21 Oct 2013 13:24:24 +0000 (15:24 +0200)]
karo: tx51: set 'max_bus_width' for ESDHC
Lothar Waßmann [Mon, 21 Oct 2013 13:23:25 +0000 (15:23 +0200)]
karo: tx51: add pad config with pullup to GPIO pins
Lothar Waßmann [Mon, 21 Oct 2013 11:49:57 +0000 (13:49 +0200)]
karo: tx51: remove CCGR setup from DCD
The startup code in arch/arm/cpu/armv7/mx5/start.S will unconditonally
enable all clocks. Thus the register settings from the DCD will be
overwritten.
Move the CCGR setup to board_early_init_f() in board/karo/tx51/tx51.c
Lothar Waßmann [Mon, 21 Oct 2013 11:31:40 +0000 (13:31 +0200)]
Fix GPL license text
Lothar Waßmann [Fri, 11 Oct 2013 11:26:39 +0000 (13:26 +0200)]
merged kc master branch
Lothar Waßmann [Fri, 11 Oct 2013 10:51:50 +0000 (12:51 +0200)]
set/evaluate de-active and pixelclk-active in DT where pssible
Lothar Waßmann [Fri, 11 Oct 2013 10:51:10 +0000 (12:51 +0200)]
call fdt_update_native_fb_mode() only from ft_board_setup
Lothar Waßmann [Fri, 11 Oct 2013 10:49:54 +0000 (12:49 +0200)]
prevent error message 'Can't set phandle'
Lothar Waßmann [Fri, 11 Oct 2013 08:52:02 +0000 (10:52 +0200)]
Merge branch 'tx28-bugfix' into karo-tx-merge
Lothar Waßmann [Fri, 11 Oct 2013 08:51:44 +0000 (10:51 +0200)]
karo: tx28: remove bogus '\n' from cmd descriptions
Lothar Waßmann [Fri, 11 Oct 2013 08:51:20 +0000 (10:51 +0200)]
karo: tx6 remove bogus '\n' from cmd descriptions
Lothar Waßmann [Fri, 11 Oct 2013 07:56:14 +0000 (09:56 +0200)]
karo: tx6: Update FDT support
Lothar Waßmann [Fri, 11 Oct 2013 07:52:27 +0000 (09:52 +0200)]
Fix various bugs in WinCE boot protocol handler
Lothar Waßmann [Thu, 10 Oct 2013 14:07:52 +0000 (16:07 +0200)]
karo: tx28: set CONFIG_MX28 before including regs-base.h
Lothar Waßmann [Thu, 10 Oct 2013 14:06:33 +0000 (16:06 +0200)]
Merge branch 'tx53-bugfix' into karo-tx-merge
Lothar Waßmann [Thu, 10 Oct 2013 14:06:30 +0000 (16:06 +0200)]
Merge branch 'tx51-bugfix' into karo-tx-merge
Lothar Waßmann [Thu, 10 Oct 2013 14:06:25 +0000 (16:06 +0200)]
karo: tx6: set default video_mode to 'VGA'
Lothar Waßmann [Thu, 10 Oct 2013 14:05:07 +0000 (16:05 +0200)]
karo: tx53: remove 'video_mode' from bootargs