Peter Ujfalusi [Tue, 13 Nov 2012 08:28:43 +0000 (09:28 +0100)]
mfd: twl-core: Support for proper PWM drivers
The twl6030-pwm driver is going to be deleted since it was only able to
control the Charging indicator LED on the twl6030 PMIC.
The new set of drivers are going to provide support for both PWMs and PWM
driven LED outputs on TWL4030 and TWL6030 PMICs.
The twl-pwm driver will handle the PWMs (2 instance) while the twl-pwmled
driver is to control the two LED instance on TWL4030 and to charging
indicator LED (1 instance) on TWL6030.
Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Peter Ujfalusi [Tue, 13 Nov 2012 08:28:42 +0000 (09:28 +0100)]
mfd: twl-core: Register twl4030-madc child only for twl4030 class
twl4030-madc driver can only handle twl4030 class MADC. The newer revisions
of twl does not have MADC, instead they have different IP called GPADC which
is not backward compatible.
Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Aaro Koskinen [Sun, 18 Nov 2012 16:36:20 +0000 (18:36 +0200)]
mfd: Introduce retu-mfd driver
Retu is a multi-function device found on Nokia Internet Tablets
implementing at least watchdog, RTC, headset detection and power button
functionality.
This patch implements minimum functionality providing register access,
IRQ handling and power off functions.
Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Colin Foe-Parker [Tue, 20 Nov 2012 09:48:44 +0000 (15:18 +0530)]
mfd: tps65217: Set PMIC to shutdown on PWR_EN toggle
Set tps65217 PMIC status to OFF if power enable toggle is supported.
By setting this bit to 1 to enter PMIC to OFF state when PWR_EN pin
is pulled low. Also adds a DT flag to specify that device pmic
supports shutdown control or not.
Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
[anilkumar@ti.com: move the additions to tps65217 MFD driver] Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Wei WANG [Tue, 20 Nov 2012 03:24:44 +0000 (11:24 +0800)]
mmc: rtsx: Explicitely include slab.h in rtsx_pci_sdmmc.c
This fixes the following build error on some architectures (parisc at least):
drivers/mmc/host/rtsx_pci_sdmmc.c: In function 'sd_normal_rw':
drivers/mmc/host/rtsx_pci_sdmmc.c:448:2: error: implicit
declaration of function 'kzalloc'
[-Werror=implicit-function-declaration]
drivers/mmc/host/rtsx_pci_sdmmc.c:448:6: warning: assignment
makes pointer from integer without a cast [enabled by default]
drivers/mmc/host/rtsx_pci_sdmmc.c:472:2: error: implicit
declaration of function 'kfree'
[-Werror=implicit-function-declaration]
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Wei WANG [Tue, 20 Nov 2012 03:24:36 +0000 (11:24 +0800)]
mmc: rtsx: Configure SD_CFG2 register in sd_rw_multi
For Realtek card reader, internal regsiter SD_CFG2 should be configured
before transferring data.
The default value of SD_CFG2 is proper for writing data. But for reading
sequence, the timing is not good enough. So in some extreme circumstance,
card reader may sample the response data from the card as good even if
the data is wrong. And this will cause the bad consequence.
In the prior version, the value of this register has been calculated,
but forgotten to write back to the internal register.
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 20 Nov 2012 03:14:45 +0000 (08:44 +0530)]
mfd: Add battery charger in tps65090 sub devs
TPS65090 supports the battery charging and hence adding
the device name in the list of TPS65090 children. Also
remove the tps65090-regulator as it duplicates with
tps65090-pmic for regulator driver.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Wed, 14 Nov 2012 15:39:28 +0000 (21:09 +0530)]
mfd: Add TI TPS80031 mfd core driver
TPS80031/ TPS80032 Fully Integrated Power Management with Power
Path and Battery Charger. The device provides five configurable
step-down converters, 11 general purpose LDOs, USB OTG Module,
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
Power Path from USB, 32K clock generator.
Add the mfd core driver for TPS80031/TPS80032.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: sta2x11-mfd: Use one lock per device instead of one lock per mfd
The lock is used to implement atomic operations on each platform
device's registers, so it looks reasonable having one lock per
device instead of one common lock for all the devices belonging
to the same sta2x11 instance.
mfd: sta2x11-mfd: Add sta2x11_mfd_get_regs_data() function
A couple of predefined clocks (mux and gated) need to be
initialized with the virtual address of the clock's controlling
register and the address of a spinlock used to protect against
races.
This function exports such data for all the mfd cells.
mfd: sta2x11-mfd: Add apb-soc regs driver and factor out common code
A driver for the apb-soc registers is needed by the clock
infrastructure code to configure and control clocks on the sta2x11
chip.
Since some of the functions in sta2x11-mfd.c were almost identical
for the two existing platform devices, the following changes
have been performed to avoid further code duplication while
adding the apb-soc-regs driver:
* The sctl_regs and apbreg_regs fields in struct sta2x11_mfd
have been turned into just one array of pointers accessed by
device index.
* Platform probe methods have become one-liners invoking a
common probe with the device's index as second parameter.
* For loops have been inserted where the same operations
were performed for each of the two bars of a pci device.
* The apbreg_mask and sctl_mask functions were almost identical,
so they were turned into inline functions invoking a common
__sta2x11_mfd_mask() with the platform device's index as last
parameter. To do this, enum sta2x11_mfd_plat_dev has been declared in
sta2x11-mfd.h and more device types have been added to it.
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Charles Keepax [Fri, 9 Nov 2012 16:15:28 +0000 (16:15 +0000)]
mfd: Only unregister platform devices allocated by the mfd core
mfd_remove_devices would iterate over all devices sharing a parent with
an mfd device regardless of whether they were allocated by the mfd core
or not. This especially caused problems when the device structure was
not contained within a platform_device, because to_platform_device is
used on each device pointer.
This patch defines a device_type for mfd devices and checks this is
present from mfd_remove_devices_fn before processing the device.
Cc: stable@vger.kernel.org Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fabio Estevam [Thu, 4 Oct 2012 03:15:09 +0000 (00:15 -0300)]
gpio: gpio-da9052: Convert to the new da9052 interrupt functions
Convert to the new da9052 interrupt functions, so that we can get rid of
irq_base references.
Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fabio Estevam [Thu, 4 Oct 2012 03:15:04 +0000 (00:15 -0300)]
mfd: da9052-core: Use regmap_irq_get_virq() and fix the probe
On a mx53qsb dt-kernel the da9052-core driver fails to probe as follows:
da9052 1-0048: DA9052 ADC IRQ failed ret=-22
The reason for the error was due to passing only the offset as the interrupt
number in request_threaded_irq() without da9052->irq_base.
The recommended approach though is to use regmap_get_virq() to acquire the
interrupt number and this allows to get rid of da9052->irq_base.
Fix it and allow the driver to probe successfully.
Also provide a few more error logs and change the irq string to "adc-irq", so
that it appears as a single word in 'cat /proc/interrupts'
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 13 Nov 2012 14:03:59 +0000 (19:33 +0530)]
mfd: tps65910: Pass irq_domain when adding mfd sub devices
When adding the sub device "tps65910-rtc", is it passed the
IO resource IRQ for the interrupt number. This interrupt needs
to map in the device irq domain. Pass the irq domain of device
in mfd_add_devices() so that proper irq mapping can be done when
adding the sub device RTC.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 13 Nov 2012 14:03:58 +0000 (19:33 +0530)]
mfd: tps65910: Move interrupt implementation code to mfd file
In place of implementing the irq support in separate file,
moving implementation to main mfd file.
The irq files only contains the table and init steps only
and does not need extra file to have this only for this
purpose.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 13 Nov 2012 14:03:57 +0000 (19:33 +0530)]
mfd: tps65910: Use regmap irq framework for interrupt support
Implement irq support of tps65910 with regmap irq framework
in place of implementing locally.
This reduces the code size significantly and easy to maintain.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 13 Nov 2012 14:03:56 +0000 (19:33 +0530)]
mfd: tps65910: Initialize mfd devices after all initialization done
Add sub devices of tps65910 after all initialization like interrupt,
clock etc. is done. This will make sure that require data gets
initialized properly before sub devices probe's get called.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 13 Nov 2012 13:48:07 +0000 (19:18 +0530)]
mfd: Implement tps6586x gpio_to_irq
The TPS6586x adds the interrupt of this device using
linear mapping on irq domain.
Hence, implement gpio_to_irq to get the irq number
corresponding to TPS6586x GPIOs which is created
dynamically.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 13 Nov 2012 13:48:06 +0000 (19:18 +0530)]
mfd: Add irq io-resource for tps6586x rtc sub driver
Add IRQ IORESOURCE for rtc sub driver of this device.
The rtc driver can get the irq by calling platform_get_irq().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Laxman Dewangan [Tue, 13 Nov 2012 13:48:05 +0000 (19:18 +0530)]
mfd: Convert tps6586x to irq_domain
Allocate the irq base if it base is not porvided i.e.
in case of device tree invocation of this driver.
Convert the tps6586x driver to irq domain, using a
legacy IRQ mapping if an irq_base is specified in
platform data or dynamically allocated and otherwise
using a linear mapping.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Peter Ujfalusi [Thu, 11 Oct 2012 11:55:32 +0000 (13:55 +0200)]
mfd: twl6040: Convert to use regmap_irq
With regmap_irq it is possible to remove the twl6040-irq.c file and
simplify the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Peter Ujfalusi [Thu, 11 Oct 2012 11:55:31 +0000 (13:55 +0200)]
mfd: twl6040: Correct Ready and Thermal interrupt handling
Create new irq handler for thermal events in order to be able to handle the
event and clean up the code regarding to interrupt handling:
Use proper function names for the irq handlers
No need to read the INTD register anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Older gcc (< 4.4) doesn't like files starting with Unicode BOMs:
include/linux/mfd/da9055/core.h:1: error: stray ‘\357’ in program
include/linux/mfd/da9055/core.h:1: error: stray ‘\273’ in program
include/linux/mfd/da9055/core.h:1: error: stray ‘\277’ in program
include/linux/mfd/da9055/pdata.h:1: error: stray ‘\357’ in program
include/linux/mfd/da9055/pdata.h:1: error: stray ‘\273’ in program
include/linux/mfd/da9055/pdata.h:1: error: stray ‘\277’ in program
include/linux/mfd/da9055/reg.h:1: error: stray ‘\357’ in program
include/linux/mfd/da9055/reg.h:1: error: stray ‘\273’ in program
include/linux/mfd/da9055/reg.h:1: error: stray ‘\277’ in program
Remove the BOMs, the rest of the files is plain ASCII anyway.
Output of "file" before:
include/linux/mfd/da9055/core.h: UTF-8 Unicode (with BOM) C program text
include/linux/mfd/da9055/pdata.h: UTF-8 Unicode (with BOM) C program text
include/linux/mfd/da9055/reg.h: UTF-8 Unicode (with BOM) C program text
Output of "file" after:
include/linux/mfd/da9055/core.h: ASCII C program text
include/linux/mfd/da9055/pdata.h: ASCII C program text
include/linux/mfd/da9055/reg.h: ASCII C program text
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Lee Jones [Mon, 5 Nov 2012 15:10:36 +0000 (16:10 +0100)]
mfd: Differentiate between u8500 and u9540 TCDM address mapping
The TCDM mappings are quite different from u8500 to u9540. If these
aren't correctly specified for a given board, it will fail to boot.
Here we add the correct TCDM base for the u9540.
Please note that although this patch allows us to boot the u9540,
it doesn't provide us with full enablement. For that, another
patch-set will follow which completely re-vamps the way the PRCMU
is passed TCDM mappings.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Lee Jones [Mon, 5 Nov 2012 15:10:35 +0000 (16:10 +0100)]
mfd: ab8500-core: Use devm_* memory/IRQ and allocation/free routines
It is better to use devm_* calls, as they allow for easier
and more automatic clean-up. Resources are device allocated,
so when a device is freed, so are all associated resources.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Lee Jones [Mon, 5 Nov 2012 15:10:34 +0000 (16:10 +0100)]
Documentation: Describe bindings for STMPE Multi-Functional Device driver
Here we add the required documentation for the STMPE Multi-Functional
Device (MFD) Device Tree bindings. It describes all of the bindings
currently supported by the driver.
Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Lee Jones [Mon, 5 Nov 2012 15:10:33 +0000 (16:10 +0100)]
mfd: Enable the STMPE MFD for Device Tree
This patch allows the STMPE Multi-Functional Device to be correctly
initialised when booting with Device Tree support enabled. Its
children are specified by the addition of subordinate devices to the
STMPE node in the Device Tree file.
Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Lee Jones [Mon, 5 Nov 2012 15:10:32 +0000 (16:10 +0100)]
mfd: Correct copy and paste mistake in stmpe
When specifying IRQ numbers for the stmpe1601, IRQ defines for the
stmpe24xx were used instead. Fortunately, the defined numbers are
the same, hence why it survived testing. This fix is merely an
aesthetic one.
Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Lee Jones [Mon, 5 Nov 2012 15:10:30 +0000 (16:10 +0100)]
mfd: Prevent STMPE from abusing mfd_add_devices' irq_base parameter
Originally IRQ incrementers were provided in some template resource
structures for keypad and touchscreen devices. These were passed as
IORESOURCE_IRQs to MFD core in the usual way. The true device IRQs
were instead added to the irq_base when mfd_add_devices was invoked.
This is clearly an abuse of the call, and does not scale when IRQ
Domains are brought into play. Before we can provide the STMPE with
its own IRQ Domain we must first fix this. This patche keeps most
of the driver's structure, keeping the template strategy. However,
instead of providing the IRQ as an increment to irq_base, we
dynamically populate the IORESOURCE_IRQ with the correct device IRQ.
Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The IRQ ranges provided in ab8500-core to be passed on to the
ab8500-gpio driver are not only redundant, but they are also
causing a warning in the boot log. These IRQ ranges, like any
other MFD related IRQ resource are passed though MFD core for
automatic conversion to virtual IRQs; however, MFD core does
not support IRQ mapping of IRQ ranges. Let's just remove them.
Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Samuel Ortiz [Fri, 9 Nov 2012 09:19:54 +0000 (10:19 +0100)]
mfd: Explicitely include slab.h to rtsx
This fixes the following build error on some architectures (parisc at least):
drivers/mfd/rtsx_pcr.c: In function 'rtsx_pci_init_chip':
drivers/mfd/rtsx_pcr.c:985:2: error: implicit declaration of function 'kcalloc'
[-Werror=implicit-function-declaration]
drivers/mfd/rtsx_pcr.c:985:13: warning: assignment makes pointer from integer
without a cast [enabled by default]
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: mc13xxx: Change probing details for mc13xxx devices
This removes auto-detection of which variant of mc13xxx is used because
mc34708 uses a different layout in the revision register that doesn't
allow differentiation any more.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Patil, Rachna [Tue, 16 Oct 2012 07:25:45 +0000 (12:55 +0530)]
IIO : ADC: tiadc: Add support of TI's ADC driver
This patch adds support for TI's ADC driver.
This is a multifunctional device.
Analog input lines are provided on which
voltage measurements can be carried out.
You can have upto 8 input lines.
Signed-off-by: Patil, Rachna <rachna@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Patil, Rachna [Tue, 16 Oct 2012 07:25:42 +0000 (12:55 +0530)]
input: TSC: ti_tscadc: Rename the existing touchscreen driver
Make way for addition of MFD driver.
The existing touchsreen driver is a MFD client.
For better readability we rename the file to
indicate its functionality as only touchscreen.
Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Patil, Rachna [Tue, 16 Oct 2012 07:25:41 +0000 (12:55 +0530)]
input: TSC: ti_tscadc: Remove definition of End Of Interrupt register
The touchscreen IP uses level sensitive interrupts rather
than edge sensitive interrupts and therefore the is no need
to use the EOI register to have the module re-strobe the
interrupt line if there pending interrupts exist.
Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Patil, Rachna [Tue, 16 Oct 2012 07:25:40 +0000 (12:55 +0530)]
input: TSC: ti_tscadc: set FIFO0 threshold Interrupt
Code currently uses FIFO1 threshold interrupt.
since this is a MFD, Dedicating FIFO0 to touchscreen
and making way for other devices to use FIFO1 as well.
The FIFO can be shared between 2 devices but since the
interrupt used is threshold interrupt on FIFO1, we would
end up having wrong interrupts. Hence changing the same.
Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Patil, Rachna [Tue, 16 Oct 2012 07:25:39 +0000 (12:55 +0530)]
input: TSC: ti_tscadc: Add Step configuration as platform data
There are 16 programmable Step Configuration
registers which are used by the sequencer.
Program the Steps in order to configure a channel
input to be sampled. If the same step is applied
several times, the coordinate values read are more
accurate.
Hence we provide the user an option of how many steps
should be configured.
For ex: If this value is assigned as 4, This means that
4 steps are applied to read x co-ordinate and 4 steps to read
y co-ordinate. Furtheron the interrupt handler already
holds code to use delta filter and report the best value
out of these values to the input sub-system.
Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Patil, Rachna [Tue, 16 Oct 2012 07:25:38 +0000 (12:55 +0530)]
input: TSC: ti_tscadc: Correct register usage
This patch cleans up the wrong register definitions
and usage for touchscreen controller.
Bit masks were not defined earlier.
For ex: consider a register define as:
write(xyz, ABC)
ABC is expected to be written to register bits 0-11.
Here we see that value written is as expected, but this write
is also affecting all the remaining bits of xyz.
The remaining bits hold the default value as 0 and the write
also sets it to zero. Hence wrong usage were not causing user
visible bugs.
Due to these reasons it was difficult to follow when
compared with TRM.
Unused definitions are also removed.
Since there is change in some naming convention because of
all the above mentioned reasons, the same has been
updated throughout the code.
Bit declarations are grouped to increase readability.
Signed-off-by: Patil, Rachna <rachna@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Linus Torvalds [Sat, 3 Nov 2012 22:27:21 +0000 (15:27 -0700)]
Merge tag 'nfs-for-3.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix a bunch of deadlock situations:
* State recovery can deadlock if we fail to release sequence ids
before scheduling the recovery thread.
* Calling deactivate_super() from an RPC workqueue thread can
deadlock because of the call to rpc_shutdown_client.
- Display the device name correctly in /proc/*/mounts
- Fix a number of incorrect error return values:
* When NFSv3 mounts fail due to a timeout.
* On NFSv4.1 backchannel setup failure
* On NFSv4 open access checks
- pnfs_find_alloc_layout() must check the layout pointer for NULL
- Fix a regression in the legacy DNS resolved
* tag 'nfs-for-3.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS4: nfs4_opendata_access should return errno
NFSv4: Initialise the NFSv4.1 slot table highest_used_slotid correctly
SUNRPC: return proper errno from backchannel_rqst
NFS: add nfs_sb_deactive_async to avoid deadlock
nfs: Show original device name verbatim in /proc/*/mount{s,info}
nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts
nfs: Check whether a layout pointer is NULL before free it
NFS: fix bug in legacy DNS resolver.
NFSv4: nfs4_locku_done must release the sequence id
NFSv4.1: We must release the sequence id when we fail to get a session slot
NFS: Wait for session recovery to finish before returning
Linus Torvalds [Sat, 3 Nov 2012 22:25:14 +0000 (15:25 -0700)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management & ACPI update from Zhang Rui,
Ho humm. Normally these things go through Len. But it's just three
small fixes, I guess I can pull directly too.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
exynos4_tmu_driver_ids should be exynos_tmu_driver_ids.
ACPI video: Ignore errors after _DOD evaluation.
thermal: solve compilation errors in rcar_thermal
Linus Torvalds [Sat, 3 Nov 2012 22:14:54 +0000 (15:14 -0700)]
Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux
Pull i2c embedded fixes from Wolfram Sang:
"Two patches are usual stuff.
The bigger patch is needed to correct a wrong decision made in this
merge window. We hoped to get the PIOQUEUE mode in the mxs driver
working with DMA, but it turned out to be too broken (leading to data
loss), so we now think it is best to remove it entirely and work only
with DMA now. The patch should be in 3.7. IMO, so users never get
the chance to use both modes in parallel."
* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
i2c: tegra: set irq name as device name
i2c-nomadik: Fixup clock handling
i2c: mxs: remove broken PIOQUEUE support
it's slightly bigger than I'd probably like, but nothing looked
dangerous enough to hold off on."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/udl: fix stride issues scanning out stride != width*bpp
drm/radeon: add load detection support for ext DAC on R200 (v2)
DRM/radeon: For single CRTC GPUs move handling of CRTC_CRT_ON to crtc_dpms().
DRM/Radeon: Fix TV DAC Load Detection for single CRTC chips.
DRM/Radeon: Clean up code in TV DAC load detection.
drm/radeon: fix ATPX function documentation
drivers/gpu/drm/radeon/evergreen_cs.c: Remove unnecessary semicolon
DRM/Radeon: On DVI-I use Load Detection when EDID is bogus.
DRM/Radeon: Fix primary DAC Load Detection for RV100 chips.
DRM/Radeon: Fix Load Detection on legacy primary DAC.
drm: exynos: removed warning due to missing typecast for mixer driver data
drm/exynos: add support for ARCH_MULTIPLATFORM
MAINTAINERS: Add git repository for Exynos DRM
drm/exynos: fix display on issue
drm/i915: Only kick out vesafb if we takeover the fbcon with KMS
drm/i915: be less verbose about inability to provide vendor backlight
drm/i915: clear the entire sdvo infoframe buffer
drm/i915: VGA needs to be on pipe A on i830M
drm/i915: fix overlay on i830M
Pull networking fixes from David Miller:
"First post-Sandy pull request"
1) Fix antenna gain handling and initialization of chan->max_reg_power
in wireless, from Felix Fietkau.
2) Fix nexthop handling in H.232 conntrack helper, from Julian
Anastasov.
3) Only process 80211 mesh config header in certain kinds of frames,
from Javier Cardona.
4) 80211 management frame header length needs to be validated, from
Johannes Berg.
5) Don't access free'd SKBs in ath9k driver, from Felix Fietkay.
6) Test for permanent state correctly in VXLAN driver, from Stephen
Hemminger.
7) BNX2X bug fixes from Yaniv Rosner and Dmitry Kravkov.
8) Fix off by one errors in bonding, from Nikolay ALeksandrov.
9) Fix divide by zero in TCP-Illinois congestion control. From Jesper
Dangaard Brouer.
10) TCP metrics code says "Yo dawg, I heard you like sizeof, so I did a
sizeof of a sizeof, so you can size your size" Fix from Julian
Anastasov.
11) Several drivers do mdiobus_free without first doing an
mdiobus_unregister leading to stray pointer references. Fix from
Peter Senna Tschudin.
12) Fix OOPS in l2tp_eth_create() error path, it's another danling
pointer kinda situation. Fix from Tom Parkin.
13) Hardware driven by the vmxnet driver can't handle larger than 16K
fragments, so split them up when necessary. From Eric Dumazet.
14) Handle zero length data length in tcp_send_rcvq() properly. Fix
from Pavel Emelyanov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
tcp-repair: Handle zero-length data put in rcv queue
vmxnet3: must split too big fragments
l2tp: fix oops in l2tp_eth_create() error path
cxgb4: Fix unable to get UP event from the LLD
drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free
drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free
bnx2x: fix HW initialization using fw 7.8.x
tcp: Fix double sizeof in new tcp_metrics code
net: fix divide by zero in tcp algorithm illinois
net: sctp: Fix typo in net/sctp
bonding: fix second off-by-one error
bonding: fix off-by-one error
bnx2x: Disable FCoE for 57840 since not yet supported by FW
bnx2x: Fix no link on 577xx 10G-baseT
bnx2x: Fix unrecognized SFP+ module after driver is loaded
bnx2x: Fix potential incorrect link speed provision
bnx2x: Restore global registers back to default.
bnx2x: Fix link down in 57712 following LFA
bnx2x: Fix 57810 1G-KR link against certain switches.
ixgbe: PTP get_ts_info missing software support
...
Pavel Emelyanov [Mon, 29 Oct 2012 05:05:33 +0000 (05:05 +0000)]
tcp-repair: Handle zero-length data put in rcv queue
When sending data into a tcp socket in repair state we should check
for the amount of data being 0 explicitly. Otherwise we'll have an skb
with seq == end_seq in rcv queue, but tcp doesn't expect this to happen
(in particular a warn_on in tcp_recvmsg shoots).
Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Reported-by: Giorgos Mavrikas <gmavrikas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Mon, 29 Oct 2012 23:41:48 +0000 (23:41 +0000)]
l2tp: fix oops in l2tp_eth_create() error path
When creating an L2TPv3 Ethernet session, if register_netdev() should fail for
any reason (for example, automatic naming for "l2tpeth%d" interfaces hits the
32k-interface limit), the netdev is freed in the error path. However, the
l2tp_eth_sess structure's dev pointer is left uncleared, and this results in
l2tp_eth_delete() then attempting to unregister the same netdev later in the
session teardown. This results in an oops.
To avoid this, clear the session dev pointer in the error path.
Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Murzov [Sat, 13 Oct 2012 00:41:25 +0000 (04:41 +0400)]
ACPI video: Ignore errors after _DOD evaluation.
There are systems where video module known to work fine regardless
of broken _DOD and ignoring returned value here doesn't cause
any issues later. This should fix brightness controls on some laptops.
Devendra Naga [Wed, 31 Oct 2012 08:46:10 +0000 (17:46 +0900)]
thermal: solve compilation errors in rcar_thermal
following were the errors reported
drivers/thermal/rcar_thermal.c: In function ‘rcar_thermal_probe’:
drivers/thermal/rcar_thermal.c:214:10: warning: passing argument 3 of ‘thermal_zone_device_register’ makes integer from pointer without a cast [enabled by default]
include/linux/thermal.h:166:29: note: expected ‘int’ but argument is of type ‘struct rcar_thermal_priv *’
drivers/thermal/rcar_thermal.c:214:10: error: too few arguments to function ‘thermal_zone_device_register’
include/linux/thermal.h:166:29: note: declared here
make[1]: *** [drivers/thermal/rcar_thermal.o] Error 1
make: *** [drivers/thermal/rcar_thermal.o] Error 2
with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
Vipul Pandya [Mon, 29 Oct 2012 02:02:36 +0000 (02:02 +0000)]
cxgb4: Fix unable to get UP event from the LLD
If T4 configuration file gets loaded from the /lib/firmware/cxgb4/ directory
then offload capabilities of the cards were getting disabled during
initialization. Hence ULDs do not get an UP event from the LLD.
Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Kravkov [Sun, 28 Oct 2012 21:59:04 +0000 (21:59 +0000)]
bnx2x: fix HW initialization using fw 7.8.x
Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be
initialized using fw values for all devices.
Otherwise ETS on 57712/578xx will not work.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pull more scsi target fixes from Nicholas Bellinger:
"This series is a second round of target fixes for v3.7-rc4 that have
come into target-devel over the last days, and are important enough to
be applied ASAP.
All are being CC'ed to stable. The most important two are:
- target: Re-add explict zeroing of INQUIRY bounce buffer memory to
fix a regression for handling zero-length payloads, a bug that went
during v3.7-rc1, and hit >= v3.6.3 stable. (nab + paolo)
- iscsi-target: Fix a long-standing missed R2T wakeup race in TX
thread processing when using a single queue slot. (Roland)
Thanks to Roland & PureStorage team for helping to track down this
long standing race with iscsi-target single queue slot operation.
Also, the tcm_fc(FCoE) regression bug that was observed recently with
-rc2 code has also been resolved with the cancel_delayed_work() return
bugfix (commit c0158ca64da5: "workqueue: cancel_delayed_work() should
return %false if work item is idle") now in -rc3. Thanks again to Yi
Zou, MDR, Robert Love @ Intel for helping to track this down."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path
iscsi-target: Fix missed wakeup race in TX thread
target: Avoid integer overflow in se_dev_align_max_sectors()
target: Don't return success from module_init() if setup fails
target: Re-add explict zeroing of INQUIRY bounce buffer memory
Linus Torvalds [Fri, 2 Nov 2012 20:27:52 +0000 (13:27 -0700)]
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"An e-mail address update, and fix a compile error on SPARC"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: Only include of_match_table with CONFIG_OF_GPIO
hwmon, fam15h_power: Change email address, MAINTAINERS entry
Linus Torvalds [Fri, 2 Nov 2012 20:27:01 +0000 (13:27 -0700)]
Merge tag 'frv-fixes-20121102' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-frv
Pull FRV fixes from David Howells:
"A collection of small fixes for the FRV architecture."
* tag 'frv-fixes-20121102' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-frv:
frv: fix the broken preempt
frv: switch to saner kernel_execve() semantics
FRV: Fix the new-style kernel_thread() stuff
FRV: Fix the preemption handling
FRV: gcc-4.1.2 also inlines weak functions
FRV: Don't objcopy the GNU build_id note
FRV: Add missing linux/export.h #inclusions
Linus Torvalds [Fri, 2 Nov 2012 20:26:11 +0000 (13:26 -0700)]
Merge tag 'stable/for-linus-3.7-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen bugfixes from Konrad Rzeszutek Wilk:
- Use appropriate macros instead of hand-rolling our own (ARM).
- Fixes if FB/KBD closed unexpectedly.
- Fix memory leak in /dev/gntdev ioctl calls.
- Fix overflow check in xenbus_file_write.
- Document cleanup.
- Performance optimization when migrating guests.
* tag 'stable/for-linus-3.7-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/mmu: Use Xen specific TLB flush instead of the generic one.
xen/arm: use the __HVC macro
xen/xenbus: fix overflow check in xenbus_file_write()
xen-kbdfront: handle backend CLOSED without CLOSING
xen-fbfront: handle backend CLOSED without CLOSING
xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF
x86: remove obsolete comment from asm/xen/hypervisor.h
projects / karo-tx-linux.git / log