Linus Torvalds [Fri, 31 Mar 2017 19:29:03 +0000 (12:29 -0700)]
Merge tag 'nfs-for-4.11-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Here are a few more bugfixes that came in over the last couple of
weeks. Most of these fix various hangs and loops that people found,
but we also had a few error handling fixes.
Stable Bugfixes:
- fix infinite loop on BAD_STATEID error
Other Bugfixes:
- fix old dentry rehash after move
- fix pnfs GETDEVINFO hangs
- fix pnfs fallback to MDS on commit errors
- fix flexfiles kernel oops"
* tag 'nfs-for-4.11-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: flexfiles: fix kernel OOPS if MDS returns unsupported DS type
NFSv4.1 fix infinite loop on IO BAD_STATEID error
PNFS fix fallback to MDS if got error on commit to DS
NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes
NFS store nfs4_deviceid in struct nfs4_filelayout_segment
NFS cleanup struct nfs4_filelayout_segment
NFS: Fix old dentry rehash after move
Linus Torvalds [Fri, 31 Mar 2017 19:21:48 +0000 (12:21 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main thing is a fix for a NULL dereference on systems that boot
using spin-tables or the ACPI parking protocol, but there are also a
couple of trivial one-liners too.
We're currently debugging a page flags corruption issue under
syzkaller, but we're still some way from fixing that as it's proving
fiddly to reproduce.
Summary:
- fix cpu_die() NULL dereference when booting secondary CPUs using
spin-table
- remove redundant #include
- remove obsolete .gitignore entry"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: drop non-existing vdso-offsets.h from .gitignore
arm64: remove redundant header file in current.h
arm64: fix NULL dereference in have_cpu_die()
Linus Torvalds [Fri, 31 Mar 2017 19:05:05 +0000 (12:05 -0700)]
Merge tag 'mmc-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.11 rc5.
MMC host:
- sdhci: Fix bug when using SDIO IRQ
- sdhci-of-at91: Fix eMMC DDR52 card detection"
* tag 'mmc-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection
mmc: sdhci: Disable runtime pm when the sdio_irq is enabled
Linus Torvalds [Fri, 31 Mar 2017 18:53:49 +0000 (11:53 -0700)]
Merge tag 'sound-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"At this time, most of changes are for ASoC, while we got one fix for
yet another race of ALSA sequencer core and a usual HD-audio quirk.
The ASoC changes are mostly small and device-specific fixes. A
slightly large volume is seen in sun8i-codec, which is a new code in
4.11, and we'd like to fix user-visible stuff before the official 4.1
release"
* tag 'sound-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda - fix a problem for lineout on a Dell AIO machine
ASoC: simple-card: fix simple_dai clk lookup
ASoC: STI: Fix reader substream pointer set
ALSA: seq: Fix race during FIFO resize
ARM: dts: sun8i: Update audio-routing with renamed widgets
ASoC: sun8i-codec: Convert to use SND_SOC_DAPM_AIF_IN
ASoC: sun8i-codec: Fix space on audio-routing widget
ASoC: sun8i-codec: Update mixer to use SOC_DAPM_DOUBLE
ASoC: sun8i-codec: Remove analog "HP" widget
ASoC: rt5665: fix wrong shift rt5665_if2_1_adc_in_enum
ASoC: rt5665: fix define of RT5665_HP_DRIVER_5X
ASoC: rcar: dma: remove unnecessary "volatile"
ASoC: rcar: clear DE bit only in PDMACHCR when it stops
ASoC: rsnd: fix sound route path when using SRC6/SRC9
ASoC: don't dereference NULL pcm_{new,free}
ASoC: rt5665: CLKDET is also a power of ASRC
ASoC: rt5665: Vref3 is necessary for Mono Amp
ASoC: rt5665: increase LDO level
ASoC: rt5665: fix getting wrong work handler container
ASoC: atmel-classd: fix audio clock rate
...
Linus Torvalds [Fri, 31 Mar 2017 18:50:31 +0000 (11:50 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- Wacom regression fixes, from Aaron Armstrong Skomra
- new device ID addition by Peter Stein
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: call _query_tablet_data() for BAMBOO_TOUCH
HID: wacom: Don't add ghost interface as shared data
HID: xinmo: fix for out of range for THT 2P arcade controller.
Linus Torvalds [Fri, 31 Mar 2017 18:34:06 +0000 (11:34 -0700)]
Merge tag 'drm-fixes-for-v4.11-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Seems to be quietening down, which means someone will make a liar of
me for rc6.
Just one vc4, one etnvaiv, one radeon, and a few i915 GVT fixes, and
one i915 normal fixes"
* tag 'drm-fixes-for-v4.11-rc5' of git://people.freedesktop.org/~airlied/linux:
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
drm/etnaviv: (re-)protect fence allocation with GPU mutex
drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
drm/i915: Restore marking context objects as dirty on pinning
drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
drm/i915/gvt: set shadow entry to scratch page while p2m failed
drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
drm/i915/gvt: fix wrong offset when loading RCS mocs
drm/i915/gvt: add write handler for mmio mbctl
drm/i915/kvmgt: Hold struct kvm reference
Commit 63d63cbf5e03 "NFSv4.1: Don't recheck delegations that
have already been checked" introduced a regression where when a
client received BAD_STATEID error it would not send any TEST_STATEID
and instead go into an infinite loop of resending the IO that caused
the BAD_STATEID.
Fixes: 63d63cbf5e03 ("NFSv4.1: Don't recheck delegations that have already been checked") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Paul Gortmaker [Mon, 27 Mar 2017 23:39:10 +0000 (19:39 -0400)]
serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
In commit d0aeaa83f0b0f7a92615bbdd6b1f96812f7dcfd2 ("serial: exar:
split out the exar code from 8250_pci") the exar driver got its own
Kconfig. However the text for the new option was never changed from
the original 8250_PCI text, and hence it appears confusing when you
get asked the same question twice:
8250/16550 PCI device support (SERIAL_8250_PCI) [Y/n/m/?] (NEW)
8250/16550 PCI device support (SERIAL_8250_EXAR) [Y/n/m] (NEW)
Adding to the confusion, is that there is no help text for this new
option to indicate it is specific to a certain family of cards.
Fix both issues at the same time, as well as the space vs. tab issues
introduced in the same commit.
Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci") Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Mon, 20 Mar 2017 15:38:57 +0000 (16:38 +0100)]
tty/serial: atmel: fix TX path in atmel_console_write()
A side effect of 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA
from transmitting in stop_tx") is that the console can be called with
TX path disabled. Then the system would hang trying to push charecters
out in atmel_console_putchar().
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Fixes: 89d8232411a8 ("tty/serial: atmel_serial: BUG: stop DMA from transmitting
in stop_tx") Cc: stable <stable@vger.kernel.org> #4.4+ Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Genoud [Mon, 20 Mar 2017 10:52:41 +0000 (11:52 +0100)]
tty/serial: atmel: fix race condition (TX+DMA)
If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uwe Kleine-König [Mon, 20 Mar 2017 09:05:38 +0000 (10:05 +0100)]
serial: mxs-auart: Fix baudrate calculation
The reference manual for the i.MX28 recommends to calculate the divisor
as
divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer
, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).
Matt Redfearn [Fri, 31 Mar 2017 11:05:32 +0000 (12:05 +0100)]
irqchip/mips-gic: Fix Local compare interrupt
Commit 4cfffcfa5106 ("irqchip/mips-gic: Fix local interrupts") added
mapping of several local interrupts during initialisation of the gic
driver. This associates virq numbers with these interrupts.
Unfortunately, as not all of the interrupts are mapped in hardware
order, when drivers subsequently request these interrupts they conflict
with the mappings that have already been set up. For example, this
manifests itself in the gic clocksource driver, which fails to probe
with the message:
This is because virq 25 (the correct IRQ number specified via device
tree) was allocated to the PERFCTR interrupt (and 24 to the timer, 26 to
the FDC). To fix this, map all of these local interrupts in the hardware
order so as to associate their virq numbers with the correct hw
interrupts.
Fixes: 4cfffcfa5106 ("irqchip/mips-gic: Fix local interrupts") Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Hui Wang [Fri, 31 Mar 2017 02:31:40 +0000 (10:31 +0800)]
ALSA: hda - fix a problem for lineout on a Dell AIO machine
On this Dell AIO machine, the lineout jack does not work.
We found the pin 0x1a is assigned to lineout on this machine, and in
the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the
heaset-set mic problem for this machine, this fixup will redefine
the pin 0x1a to headphone-mic, as a result the lineout doesn't
work anymore.
After consulting with Dell, they told us this machine doesn't support
microphone via headset jack, so we add a new fixup which only defines
the pin 0x18 as the headset-mic.
[rearranged the fixup insertion position by tiwai in order to make the
merge with other branches easier -- tiwai]
Fixes: 59ec4b57bcae ("ALSA: hda - Fix headset mic detection problem for two dell machines") Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Zhengyi Shen [Wed, 29 Mar 2017 07:00:20 +0000 (15:00 +0800)]
x86/boot: Include missing header file
Sparse complains about missing forward declarations:
arch/x86/boot/compressed/error.c:8:6:
warning: symbol 'warn' was not declared. Should it be static?
arch/x86/boot/compressed/error.c:15:6:
warning: symbol 'error' was not declared. Should it be static?
Yazen Ghannam [Thu, 30 Mar 2017 11:17:14 +0000 (13:17 +0200)]
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.
Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.
Tested on AMD Fam15h and Fam17h systems.
WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
kobject: (ffff88085bb256c0): attempted to be registered with empty name!
...
Call Trace:
kobject_add_internal
kobject_add
kobject_create_and_add
threshold_create_device
threshold_init_device
Dave Airlie [Fri, 31 Mar 2017 01:50:56 +0000 (11:50 +1000)]
Merge tag 'drm-intel-fixes-2017-03-29' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
drm/i915 fixes for v4.11-rc5
* tag 'drm-intel-fixes-2017-03-29' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Restore marking context objects as dirty on pinning
drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
drm/i915/gvt: set shadow entry to scratch page while p2m failed
drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
drm/i915/gvt: fix wrong offset when loading RCS mocs
drm/i915/gvt: add write handler for mmio mbctl
drm/i915/kvmgt: Hold struct kvm reference
Dave Airlie [Fri, 31 Mar 2017 01:50:04 +0000 (11:50 +1000)]
Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes
a single fix to keep fence seqnos of completed jobs monotonically
increasing, as expected in various locations of the driver code. Also
tagged for stable.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: (re-)protect fence allocation with GPU mutex
Vineet Gupta [Thu, 30 Mar 2017 17:02:57 +0000 (10:02 -0700)]
ARC: fix build warnings with !CONFIG_KPROBES
| CC lib/nmi_backtrace.o
| In file included from ../include/linux/kprobes.h:43:0,
| from ../lib/nmi_backtrace.c:17:
| ../arch/arc/include/asm/kprobes.h:57:13: warning: 'trap_is_kprobe' defined but not used [-Wunused-function]
| static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
| ^~~~~~~~~~~~~~
The warning started with 7d134b2ce6 ("kprobes: move kprobe declarations
to asm-generic/kprobes.h") which started including <asm/kprobes.h>
unconditionally into <linux/kprobes.h> exposing a stub function for
!CONFIG_KPROBES to rest of world. Fix that by making the stub a macro
Alexey Brodkin [Wed, 29 Mar 2017 14:15:11 +0000 (17:15 +0300)]
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
As reported in STAR 9001165532, an SLC control reg read (for checking
busy state) right after SLC invalidate command may incorrectly return
NOT busy causing software to NOT spin-wait while operation is underway.
(and for some reason this only happens if L1 cache is also disabled - as
required by IOC programming model)
Suggested workaround is to do an additional Control Reg read, which
ensures the 2nd read gets the right status.
Linus Torvalds [Thu, 30 Mar 2017 22:08:38 +0000 (15:08 -0700)]
Merge tag 'pci-v4.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix iProc memory corruption
- fix ThunderX usage of unregistered PNP/ACPI ID
- fix ThunderX resource reservation on early firmware
* tag 'pci-v4.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller
PCI: thunder-pem: Use Cavium assigned hardware ID for ThunderX host controller
PCI: iproc: Save host bridge window resource in struct iproc_pcie
Max Filippov [Wed, 29 Mar 2017 22:44:47 +0000 (15:44 -0700)]
xtensa: make __pa work with uncached KSEG addresses
When __pa is applied to virtual address in uncached KSEG region the
result is incorrect. Fix it by checking if the original address is in
the uncached KSEG and adjusting the result. It looks better than masking
off bits because pfn_valid would correctly work with new __pa results
and it may be made working in noMMU case, once we get definition for
uncached memory view.
This is required for the dma_common_mmap and DMA debug code to work
correctly: they both indirectly use __pa with coherent DMA addresses.
In case of DMA debug the visible effect is false reports that an address
mapped for DMA is accessed by CPU.
Cc: stable@vger.kernel.org Tested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The controller has different timings for MMC_TIMING_UHS_DDR50 and
MMC_TIMING_MMC_DDR52. Configuring the controller with SDHCI_CTRL_UHS_DDR50,
when MMC_TIMING_MMC_DDR52 timings are requested, is not correct and can
lead to unexpected behavior.
Hans de Goede [Sun, 26 Mar 2017 11:14:45 +0000 (13:14 +0200)]
mmc: sdhci: Disable runtime pm when the sdio_irq is enabled
SDIO cards may need clock to send the card interrupt to the host.
On a cherrytrail tablet with a RTL8723BS wifi chip, without this patch
pinging the tablet results in:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=78.6 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1760 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=753 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.88 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=795 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1841 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=810 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1860 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=812 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=48.6 ms
Where as with this patch I get:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=3.96 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1.97 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=17.2 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=2.46 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=2.83 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=2.10 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=2.04 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=1.40 ms
Cc: Dong Aisheng <b29396@freescale.com> Cc: Ian W MORRISON <ianwmorrison@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Masahiro Yamada [Thu, 30 Mar 2017 17:44:17 +0000 (02:44 +0900)]
arm64: drop non-existing vdso-offsets.h from .gitignore
Since commit a66649dab350 ("arm64: fix vdso-offsets.h dependency"),
include/generated/vdso-offsets.h is directly generated without
arch/arm64/kernel/vdso/vdso-offsets.h.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Andrey Konovalov [Wed, 29 Mar 2017 14:11:22 +0000 (16:11 +0200)]
net/packet: fix overflow in check for tp_reserve
When calculating po->tp_hdrlen + po->tp_reserve the result can overflow.
Fix by checking that tp_reserve <= INT_MAX on assign.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Konovalov [Wed, 29 Mar 2017 14:11:21 +0000 (16:11 +0200)]
net/packet: fix overflow in check for tp_frame_nr
When calculating rb->frames_per_block * req->tp_block_nr the result
can overflow.
Add a check that tp_block_size * tp_block_nr <= UINT_MAX.
Since frames_per_block <= tp_block_size, the expression would
never overflow.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Konovalov [Wed, 29 Mar 2017 14:11:20 +0000 (16:11 +0200)]
net/packet: fix overflow in check for priv area size
Subtracting tp_sizeof_priv from tp_block_size and casting to int
to check whether one is less then the other doesn't always work
(both of them are unsigned ints).
Compare them as is instead.
Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as
it can overflow inside BLK_PLUS_PRIV otherwise.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Thu, 30 Mar 2017 18:03:25 +0000 (20:03 +0200)]
Merge tag 'asoc-fix-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.11
A relatively large pile of fixes for mainline, the first since the merge
window. The biggest block of changes here by volume is the sun8i-codec
set, the driver was newly added in the merge window but it was realized
that renaming some of the user visible controls was required so these
are being pushed for v4.11 to avoid the original code appearing in a
release. Otherwise it's all fairly standard bugfix stuff.
Arend Van Spriel [Tue, 28 Mar 2017 08:11:30 +0000 (09:11 +0100)]
brcmfmac: use local iftype avoiding use-after-free of virtual interface
A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual
interface is removed using call to brcmf_remove_interface(). After that
the virtual interface instance has been freed and should not be referenced.
Solve this by storing the nl80211 iftype in local variable, which is used
in a couple of places anyway.
Cc: stable@vger.kernel.org # 4.10.x, 4.9.x Reported-by: Daniel J Blueman <daniel@quora.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Tue, 21 Mar 2017 14:24:11 +0000 (09:24 -0500)]
rtlwifi: Fix scheduling while atomic splat
Following commit cceb0a597320 ("rtlwifi: Add work queue for c2h cmd."),
the following BUG is reported when rtl8723be is used:
BUG: sleeping function called from invalid context at mm/slab.h:432
in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W O 4.11.0-rc3-wl+ #276
Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014
Call Trace:
<IRQ>
dump_stack+0x63/0x89
___might_sleep+0xe9/0x130
__might_sleep+0x4a/0x90
kmem_cache_alloc_trace+0x19f/0x200
? rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi]
rtl_c2hcmd_enqueue+0x3e/0x110 [rtlwifi]
rtl8723be_c2h_packet_handler+0xac/0xc0 [rtl8723be]
rtl8723be_rx_command_packet+0x37/0x5c [rtl8723be]
_rtl_pci_rx_interrupt+0x200/0x6b0 [rtl_pci]
_rtl_pci_interrupt+0x20c/0x5d0 [rtl_pci]
__handle_irq_event_percpu+0x3f/0x1d0
handle_irq_event_percpu+0x23/0x60
handle_irq_event+0x3c/0x60
handle_fasteoi_irq+0xa2/0x170
handle_irq+0x20/0x30
do_IRQ+0x48/0xd0
common_interrupt+0x89/0x89
...
Although commit cceb0a597320 converted most c2h commands to use a work
queue, the Bluetooth coexistence routines can be in atomic mode when
they execute such a call.
Fixes: cceb0a597320 ("rtlwifi: Add work queue for c2h cmd.") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Kalle Valo [Thu, 30 Mar 2017 16:38:15 +0000 (19:38 +0300)]
Merge tag 'iwlwifi-for-kalle-2017-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
iwlwifi fixes for 4.11
Here are three patches intended for 4.11. The first one is an RCU fix
by Sari. The second one is a fix for a potential out-of-bounds access
crash by Dan. And finally, the third and bigger one, is a fix for
IBSS, which has been broken since DQA was enabled in the driver.
Mark Salter [Fri, 24 Mar 2017 13:53:56 +0000 (09:53 -0400)]
arm64: fix NULL dereference in have_cpu_die()
Commit 5c492c3f5255 ("arm64: smp: Add function to determine if cpus are
stuck in the kernel") added a helper function to determine if die() is
supported in cpu_ops. This function assumes a cpu will have a valid
cpu_ops entry, but that may not be the case for cpu0 is spin-table or
parking protocol is used to boot secondary cpus. In that case, there
is a NULL dereference if have_cpu_die() is called by cpu0. So add a
check for a valid cpu_ops before dereferencing it.
Fixes: 5c492c3f5255 ("arm64: smp: Add function to determine if cpus are stuck in the kernel") Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Eric Anholt [Tue, 28 Mar 2017 20:13:43 +0000 (13:13 -0700)]
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
Without this, the first modeset would dereference past the allocation
when trying to free the mm node.
Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170328201343.4884-1-eric@anholt.net Fixes: d8dbf44f13b9 ("drm/vc4: Make the CRTCs cooperate on allocating display lists.") Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The GCC '-maccumulate-outgoing-args' flag is enabled for most configs,
mostly because of issues which are no longer relevant. For most
configs, and with most recent versions of GCC, it's no longer needed.
Clarify which cases need it, and only enable it for those cases. Also
produce a compile-time error for the ftrace graph + mcount + '-Os' case,
which will otherwise cause runtime failures.
The main benefit of '-maccumulate-outgoing-args' is that it prevents an
ugly prologue for functions which have aligned stacks. But removing the
option also has some benefits: more readable argument saves, smaller
text size, and (presumably) slightly improved performance.
Here are the object size savings for 32-bit and 64-bit defconfig
kernels:
Li Qiang [Tue, 28 Mar 2017 03:10:53 +0000 (20:10 -0700)]
drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the
'req->mip_levels' array. This array can be assigned any value from
the user space. As both the 'num_sizes' and the array is uint32_t,
it is easy to make 'num_sizes' overflow. The later 'mip_levels' is
used as the loop count. This can lead an oob write. Add the check of
'req->mip_levels' to avoid this.
Cc: <stable@vger.kernel.org> Signed-off-by: Li Qiang <liqiang6-s@360.cn> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Thomas Hellstrom [Mon, 27 Mar 2017 11:06:05 +0000 (13:06 +0200)]
drm/vmwgfx: Remove getparam error message
The mesa winsys sometimes uses unimplemented parameter requests to
check for features. Remove the error message to avoid bloating the
kernel log.
Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Thomas Hellstrom [Mon, 27 Mar 2017 10:38:25 +0000 (12:38 +0200)]
drm/ttm: Avoid calling drm_ht_remove from atomic context
On recent kernels, calling drm_ht_remove triggers a might_sleep() warning
from within vfree(). So avoid calling it from atomic context. The use-cases
we fix here are both from destructors so there should be no concurrent
use of the hash tables.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Thomas Hellstrom [Mon, 27 Mar 2017 09:21:25 +0000 (11:21 +0200)]
drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.
This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.
Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is
used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()),
which can leak useful addresses to dmesg.
HID: wacom: call _query_tablet_data() for BAMBOO_TOUCH
Commit a544c619a54b ("HID: wacom: do not attempt to switch mode
while in probe") introduces delayed work for querying (setting the
mode) on all tablets. Bamboo Touch (056a:00d0) has a ghost
interface which claims to be a pen device. Though this device can
be removed, we have to set the mode on the ghost pen interface
before we remove it. After the aforementioned delay was introduced
the device was being removed before the mode setting could be
executed.
HID: wacom: Don't add ghost interface as shared data
A previous commit (below) adds a check for already probed interfaces to
Wacom's matching heuristic. Unfortunately this causes the Bamboo Pen
(CTL-460) to match itself to its 'ghost' touch interface. After
subsequent changes to the driver this match to the ghost causes the
kernel to crash. This patch avoids calling wacom_add_shared_data()
for the BAMBOO_PEN's ghost touch interface.
Fixes: 41372d5d40e7 ("HID: wacom: Augment 'oVid' and 'oPid' with heuristics for HID_GENERIC") Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Dmitry Torokhov [Thu, 23 Mar 2017 20:21:38 +0000 (13:21 -0700)]
ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
If, while locating GPIOs by name, we get probe deferral, we should
immediately report it to caller rather than trying to fall back to parsing
unnamed GPIOs from _CRS block.
Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-and-Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Hans de Goede [Fri, 24 Mar 2017 10:08:47 +0000 (11:08 +0100)]
gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set
On Bay Trail / Cherry Trail systems with a LID switch, the LID switch is
often connect to a gpioint handled by an _IAE event handler.
Before this commit such systems would not wake up when opening the lid,
requiring the powerbutton to be pressed after opening the lid to wakeup.
Note that Bay Trail / Cherry Trail systems use suspend-to-idle, so
the interrupts are generated anyway on those lines on lid switch changes,
but they are treated by the IRQ subsystem as spurious while suspended if
not marked as wakeup IRQs.
This commit calls enable_irq_wake() for _IAE GpioInts with a valid
event handler which have their Wake flag set. This fixes such systems
not waking up when opening the lid.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Heiko Carstens [Mon, 27 Mar 2017 07:48:04 +0000 (09:48 +0200)]
s390/uaccess: get_user() should zero on failure (again)
Commit fd2d2b191fe7 ("s390: get_user() should zero on failure")
intended to fix s390's get_user() implementation which did not zero
the target operand if the read from user space faulted. Unfortunately
the patch has no effect: the corresponding inline assembly specifies
that the operand is only written to ("=") and the previous value is
discarded.
Therefore the compiler is free to and actually does omit the zero
initialization.
To fix this simply change the contraint modifier to "+", so the
compiler cannot omit the initialization anymore.
Fixes: c9ca78415ac1 ("s390/uaccess: provide inline variants of get_user/put_user") Fixes: fd2d2b191fe7 ("s390: get_user() should zero on failure") Cc: stable@vger.kernel.org Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds [Thu, 30 Mar 2017 02:59:49 +0000 (19:59 -0700)]
Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
- Fix a potential deadlock in cpu_cooling driver, which was introduced
in 4.11-rc1. (Matthew Wilcox)
- Fix the cpu_cooling and devfreq_cooling code to handle possible error
return value from OPP calls, together with three minor fixes in the
same patch series. (Viresh Kumar)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: cpu_cooling: Check OPP for errors
thermal: cpu_cooling: Replace dev_warn with dev_err
thermal: devfreq: Check OPP for errors
thermal: devfreq_cooling: Replace dev_warn with dev_err
thermal: devfreq: Simplify expression
thermal: Fix potential deadlock in cpu_cooling
The following patchset contains a rather large update with Netfilter
fixes, specifically targeted to incorrect RCU usage in several spots and
the userspace conntrack helper infrastructure (nfnetlink_cthelper),
more specifically they are:
1) expect_class_max is incorrect set via cthelper, as in kernel semantics
mandate that this represents the array of expectation classes minus 1.
Patch from Liping Zhang.
2) Expectation policy updates via cthelper are currently broken for several
reasons: This code allows illegal changes in the policy such as changing
the number of expeciation classes, it is leaking the updated policy and
such update occurs with no RCU protection at all. Fix this by adding a
new nfnl_cthelper_update_policy() that describes what is really legal on
the update path.
3) Fix several memory leaks in cthelper, from Jeffy Chen.
4) synchronize_rcu() is missing in the removal path of several modules,
this may lead to races since CPU may still be running on code that has
just gone. Also from Liping Zhang.
5) Don't use the helper hashtable from cthelper, it is not safe to walk
over those bits without the helper mutex. Fix this by introducing a
new independent list for userspace helpers. From Liping Zhang.
6) nf_ct_extend_unregister() needs synchronize_rcu() to make sure no
packets are walking on any conntrack extension that is gone after
module removal, again from Liping.
7) nf_nat_snmp may crash if we fail to unregister the helper due to
accidental leftover code, from Gao Feng.
8) Fix leak in nfnetlink_queue with secctx support, from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 29 Mar 2017 21:30:19 +0000 (14:30 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Five fixes for this series:
- a fix from me to ensure that blk-mq drivers that terminate IO in
their ->queue_rq() handler by returning QUEUE_ERROR don't stall
with a scheduler enabled.
- four nbd fixes from Josef and Ratna, fixing various problems that
are critical enough to go in for this cycle. They have been well
tested"
* 'for-linus' of git://git.kernel.dk/linux-block:
nbd: replace kill_bdev() with __invalidate_device()
nbd: set queue timeout properly
nbd: set rq->errors to actual error code
nbd: handle ERESTARTSYS properly
blk-mq: include errors in did_work calculation
Zakharov Vlad [Wed, 29 Mar 2017 10:41:46 +0000 (13:41 +0300)]
ezchip: nps_enet: check if napi has been completed
After a new NAPI_STATE_MISSED state was added to NAPI we can get into
this state and in such case we have to reschedule NAPI as some work is
still pending and we have to process it. napi_complete_done() function
returns false if we have to reschedule something (e.g. in case we were
in MISSED state) as current polling have not been completed yet.
nps_enet driver hasn't been verifying the return value of
napi_complete_done() and has been forcibly enabling interrupts. That is
not correct as we should not enable interrupts before we have processed
all scheduled work. As a result we were getting trapped in interrupt
hanlder chain as we had never been able to disabale ethernet
interrupts again.
So this patch makes nps_enet_poll() func verify return value of
napi_complete_done() and enable interrupts only in case all scheduled
work has been completed.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 29 Mar 2017 21:05:34 +0000 (14:05 -0700)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: Small misc. fixes.
Fix a NULL pointer crash in open failure path, wrong arguments when
printing error messages, and a DMA unmap bug in XDP shutdown path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Tue, 28 Mar 2017 23:47:31 +0000 (19:47 -0400)]
bnxt_en: Fix DMA unmapping of the RX buffers in XDP mode during shutdown.
In bnxt_free_rx_skbs(), which is called to free up all RX buffers during
shutdown, we need to unmap the page if we are running in XDP mode.
Fixes: c61fb99cae51 ("bnxt_en: Add RX page mode support.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: Correct the order of arguments to netdev_err() in bnxt_set_tpa()
Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: Fix NULL pointer dereference in reopen failure path
Net device reset can fail when the h/w or f/w is in a bad state.
Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc().
The cleanup invokes bnxt_hwrm_resource_free() which inturn
calls bnxt_disable_int(). In this routine, the code segment
if (ring->fw_ring_id != INVALID_HW_RING_ID)
BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons);
results in NULL pointer dereference as cpr->cp_doorbell is not yet
initialized, and fw_ring_id is zero.
The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before
bnxt_init_chip() is invoked.
Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
cpuidle: powernv: Pass correct drv->cpumask for registration
drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
On PowerNV platform cpu_present could be less than cpu_possible in cases
where firmware detects the cpu, but it is not available to the OS. When
CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
we skip creating cpu_device.
This breaks cpuidle on powernv where register_cpu() is not called for
cpus in cpu_possible_mask that cannot be hot-added at runtime.
Trying cpuidle_register_device() on cpu without cpu_device will cause
crash like this:
Helge Deller [Wed, 29 Mar 2017 06:25:30 +0000 (08:25 +0200)]
parisc: Avoid stalled CPU warnings after system shutdown
Commit 73580dac7618 ("parisc: Fix system shutdown halt") introduced an endless
loop for systems which don't provide a software power off function. But the
soft lockup detector will detect this and report stalled CPUs after some time.
Avoid those unwanted warnings by disabling the soft lockup detector.
Helge Deller [Sat, 25 Mar 2017 10:59:15 +0000 (11:59 +0100)]
parisc: Clean up fixup routines for get_user()/put_user()
Al Viro noticed that userspace accesses via get_user()/put_user() can be
simplified a lot with regard to usage of the exception handling.
This patch implements a fixup routine for get_user() and put_user() in such
that the exception handler will automatically load -EFAULT into the register
%r8 (the error value) in case on a fault on userspace. Additionally the fixup
routine will zero the target register on fault in case of a get_user() call.
The target register is extracted out of the faulting assembly instruction.
This patch brings a few benefits over the old implementation:
1. Exception handling gets much cleaner, easier and smaller in size.
2. Helper functions like fixup_get_user_skip_1 (all of fixup.S) can be dropped.
3. No need to hardcode %r9 as target register for get_user() any longer. This
helps the compiler register allocator and thus creates less assembler
statements.
4. No dependency on the exception_data contents any longer.
5. Nested faults will be handled cleanly.
Helge Deller [Wed, 29 Mar 2017 19:41:05 +0000 (21:41 +0200)]
parisc: Fix access fault handling in pa_memcpy()
pa_memcpy() is the major memcpy implementation in the parisc kernel which is
used to do any kind of userspace/kernel memory copies.
Al Viro noticed various bugs in the implementation of pa_mempcy(), most notably
that in case of faults it may report back to have copied more bytes than it
actually did.
Fixing those bugs is quite hard in the C-implementation, because the compiler
is messing around with the registers and we are not guaranteed that specific
variables are always in the same processor registers. This makes proper fault
handling complicated.
This patch implements pa_memcpy() in assembler. That way we have correct fault
handling and adding a 64-bit copy routine was quite easy.
Runtime tested with 32- and 64bit kernels.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
Guillaume Nault [Wed, 29 Mar 2017 06:45:29 +0000 (08:45 +0200)]
l2tp: purge socket queues in the .destruct() callback
The Rx path may grab the socket right before pppol2tp_release(), but
nothing guarantees that it will enqueue packets before
skb_queue_purge(). Therefore, the socket can be destroyed without its
queues fully purged.
Fix this by purging queues in pppol2tp_session_destruct() where we're
guaranteed nothing is still referencing the socket.
Fixes: 9e9cb6221aa7 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Wed, 29 Mar 2017 06:44:59 +0000 (08:44 +0200)]
l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6
The code following l2tp_tunnel_find() expects that a new reference is
held on sk. Either sk_receive_skb() or the discard_put error path will
drop a reference from the tunnel's socket.
This issue exists in both l2tp_ip and l2tp_ip6.
Fixes: a3c18422a4b4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 29 Mar 2017 15:55:25 +0000 (08:55 -0700)]
Merge branch 'regset' (PTRACE_SETREGSET data leakage)
Merge PTRACE_SETREGSET leakage fixes from Dave Martin:
"This series is the collection of fixes I proposed on this topic, that
have not yet appeared upstream or in the stable branches,
The issue can leak kernel stack, but doesn't appear to allow userspace
to attack the kernel directly. The affected architectures are c6x,
h8300, metag, mips and sparc.
[ Mark Salter points out that c6x has no MMU or other mechanism to
prevent userspace access to kernel code or data on c6x, but it
doesn't hurt to clean that case up too. ]
The bugs arise from use of user_regset_copyin(). Users of
user_regset_copyin() can work in one of two ways:
1) Copy directly to thread_struct or equivalent. (This seems to be
the design assumption of the regset API, and is the most common
approach.)
2) Copy to a local variable and then transfer to thread_struct. (A
significant minority of cases.)
Buggy code typically involves approach 2"
* emailed patches from Dave Martin <Dave.Martin@arm.com>:
sparc/ptrace: Preserve previous registers for short regset write
mips/ptrace: Preserve previous registers for short regset write
metag/ptrace: Reject partial NT_METAG_RPIPE writes
metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS
metag/ptrace: Preserve previous registers for short regset write
h8300/ptrace: Fix incorrect register transfer count
c6x/ptrace: Remove useless PTRACE_SETREGSET implementation
Dave Martin [Mon, 27 Mar 2017 14:10:59 +0000 (15:10 +0100)]
sparc/ptrace: Preserve previous registers for short regset write
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not clear what behaviour is sensible when doing partial write of
NT_METAG_RPIPE, so just don't bother.
This patch assumes that userspace will never rely on a partial SETREGSET
in this case, since it's not clear what should happen anyway.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Martin [Mon, 27 Mar 2017 14:10:56 +0000 (15:10 +0100)]
metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill TXSTATUS, a well-defined default value is used, based on the
task's current value.
Suggested-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Martin [Mon, 27 Mar 2017 14:10:55 +0000 (15:10 +0100)]
metag/ptrace: Preserve previous registers for short regset write
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Martin [Mon, 27 Mar 2017 14:10:54 +0000 (15:10 +0100)]
h8300/ptrace: Fix incorrect register transfer count
regs_set() and regs_get() are vulnerable to an off-by-1 buffer overrun
if CONFIG_CPU_H8S is set, since this adds an extra entry to
register_offset[] but not to user_regs_struct.
So, iterate over user_regs_struct based on its actual size, not based on
the length of register_offset[].
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gpr_set won't work correctly and can never have been tested, and the
correct behaviour is not clear due to the endianness-dependent task
layout.
So, just remove it. The core code will now return -EOPNOTSUPPORT when
trying to set NT_PRSTATUS on this architecture until/unless a correct
implementation is supplied.
Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook has pointed out that xfrm_replay_state_esn_len() is subject to
wrapping issues. To ensure we are correctly ensuring that the two ESN
structures are the same size compare both the overall size as reported
by xfrm_replay_state_esn_len() and the internal length are the same.
When a new xfrm state is created during an XFRM_MSG_NEWSA call we
validate the user supplied replay_esn to ensure that the size is valid
and to ensure that the replay_window size is within the allocated
buffer. However later it is possible to update this replay_esn via a
XFRM_MSG_NEWAE call. There we again validate the size of the supplied
buffer matches the existing state and if so inject the contents. We do
not at this point check that the replay_window is within the allocated
memory. This leads to out-of-bounds reads and writes triggered by
netlink packets. This leads to memory corruption and the potential for
priviledge escalation.
We already attempt to validate the incoming replay information in
xfrm_new_ae() via xfrm_replay_verify_len(). This confirms that the user
is not trying to change the size of the replay state buffer which
includes the replay_esn. It however does not check the replay_window
remains within that buffer. Add validation of the contained
replay_window.
Lucas Stach [Wed, 22 Mar 2017 11:07:23 +0000 (12:07 +0100)]
drm/etnaviv: (re-)protect fence allocation with GPU mutex
The fence allocation needs to be protected by the GPU mutex, otherwise
the fence seqnos of concurrent submits might not match the insertion order
of the jobs in the kernel ring. This breaks the assumption that jobs
complete with monotonically increasing fence seqnos.
Fixes: d9853490176c (drm/etnaviv: take GPU lock later in the submit process) CC: stable@vger.kernel.org #4.9+ Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Dan Carpenter [Fri, 17 Mar 2017 20:51:20 +0000 (23:51 +0300)]
Btrfs: fix an integer overflow check
This isn't super serious because you need CAP_ADMIN to run this code.
I added this integer overflow check last year but apparently I am
rubbish at writing integer overflow checks... There are two issues.
First, access_ok() works on unsigned long type and not u64 so on 32 bit
systems the access_ok() could be checking a truncated size. The other
issue is that we should be using a stricter limit so we don't overflow
the kzalloc() setting ctx->clone_roots later in the function after the
access_ok():
Liu Bo [Fri, 24 Mar 2017 22:04:50 +0000 (15:04 -0700)]
Btrfs: bring back repair during read
Commit 20a7db8ab3f2 ("btrfs: add dummy callback for readpage_io_failed
and drop checks") made a cleanup around readpage_io_failed_hook, and
it was supposed to keep the original sematics, but it also
unexpectedly disabled repair during read for dup, raid1 and raid10.
This fixes the problem by letting data's inode call the generic
readpage_io_failed callback by returning -EAGAIN from its
readpage_io_failed_hook in order to notify end_bio_extent_readpage to
do the rest. We don't call it directly because the generic one takes
an offset from end_bio_extent_readpage() to calculate the index in the
checksum array and inode's readpage_io_failed_hook doesn't offer that
offset.
Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ keep the const function attribute ] Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Berg [Wed, 29 Mar 2017 12:15:24 +0000 (14:15 +0200)]
mac80211: unconditionally start new netdev queues with iTXQ support
When internal mac80211 TXQs aren't supported, netdev queues must
always started out started even when driver queues are stopped
while the interface is added. This is necessary because with the
internal TXQ support netdev queues are never stopped and packet
scheduling/dropping is done in mac80211.
Cc: stable@vger.kernel.org # 4.9+ Fixes: 80a83cfc434b1 ("mac80211: skip netdev queue control with software queuing") Reported-and-tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
Commit fd567653bdb9 ("usb: phy: isp1301: Add OF device ID table")
added an OF device ID table, but used the of_match_ptr() macro
that will lead to a build warning if CONFIG_OF symbol is disabled:
drivers/usb/phy//phy-isp1301.c:36:34: warning: ‘isp1301_of_match’ defined but not used [-Wunused-const-variable=]
static const struct of_device_id isp1301_of_match[] = {
^~~~~~~~~~~~~~~~
Fixes: fd567653bdb9 ("usb: phy: isp1301: Add OF device ID table") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Tue, 28 Mar 2017 12:55:30 +0000 (15:55 +0300)]
xhci: Manually give back cancelled URB if we can't queue it for cancel
xhci needs to take care of four scenarios when asked to cancel a URB.
1 URB is not queued or already given back.
usb_hcd_check_unlink_urb() will return an error, we pass the error on
2 We fail to find xhci internal structures from urb private data such as
virtual device and endpoint ring.
Give back URB immediately, can't do anything about internal structures.
3 URB private data has valid pointers to xhci internal data, but host is
not responding.
give back URB immedately and remove the URB from the endpoint lists.
4 Everyting is working
add URB to cancel list, queue a command to stop the endpoint, after
which the URB can be turned to no-op or skipped, removed from lists,
and given back.
We failed to give back the urb in case 2 where the correct device and
endpoint pointers could not be retrieved from URB private data.
This caused a hang on Dell Inspiron 5558/0VNM2T at resume from suspend
as urb was never returned.
Mathias Nyman [Tue, 28 Mar 2017 12:55:29 +0000 (15:55 +0300)]
xhci: Set URB actual length for stopped control transfers
A control transfer that stopped at the status stage incorrectly
warned about a "unexpected TRB Type 4", and did not set the
transferred actual_length for the URB.
The URB actual_length for control transfers should contain the
bytes transferred in the data stage.
Bytes of a partially sent setup stage and missing bytes from
status stage should be left out.
Arend Van Spriel [Tue, 28 Mar 2017 08:11:31 +0000 (09:11 +0100)]
cfg80211: check rdev resume callback only for registered wiphy
We got the following use-after-free KASAN report:
BUG: KASAN: use-after-free in wiphy_resume+0x591/0x5a0 [cfg80211]
at addr ffff8803fc244090
Read of size 8 by task kworker/u16:24/2587
CPU: 6 PID: 2587 Comm: kworker/u16:24 Tainted: G B 4.9.13-debug+
Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.2.19 12/22/2016
Workqueue: events_unbound async_run_entry_fn ffff880425d4f9d8ffffffffaeedb541ffff88042b80ef00ffff8803fc244088 ffff880425d4fa00ffffffffae84d7a1ffff880425d4fa98ffff8803fc244080 ffff88042b80ef00ffff880425d4fa88ffffffffae84da3affffffffc141f7d9
Call Trace:
[<ffffffffaeedb541>] dump_stack+0x85/0xc4
[<ffffffffae84d7a1>] kasan_object_err+0x21/0x70
[<ffffffffae84da3a>] kasan_report_error+0x1fa/0x500
[<ffffffffc141f7d9>] ? cfg80211_bss_age+0x39/0xc0 [cfg80211]
[<ffffffffc141f83a>] ? cfg80211_bss_age+0x9a/0xc0 [cfg80211]
[<ffffffffae48d46d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211]
[<ffffffffae84def1>] __asan_report_load8_noabort+0x61/0x70
[<ffffffffc13fb100>] ? wiphy_suspend+0xbb0/0xc70 [cfg80211]
[<ffffffffc13fb751>] ? wiphy_resume+0x591/0x5a0 [cfg80211]
[<ffffffffc13fb751>] wiphy_resume+0x591/0x5a0 [cfg80211]
[<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211]
[<ffffffffaf3b206e>] dpm_run_callback+0x6e/0x4f0
[<ffffffffaf3b31b2>] device_resume+0x1c2/0x670
[<ffffffffaf3b367d>] async_resume+0x1d/0x50
[<ffffffffae3ee84e>] async_run_entry_fn+0xfe/0x610
[<ffffffffae3d0666>] process_one_work+0x716/0x1a50
[<ffffffffae3d05c9>] ? process_one_work+0x679/0x1a50
[<ffffffffafdd7b6d>] ? _raw_spin_unlock_irq+0x3d/0x60
[<ffffffffae3cff50>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0
[<ffffffffae3d1a80>] worker_thread+0xe0/0x1460
[<ffffffffae3d19a0>] ? process_one_work+0x1a50/0x1a50
[<ffffffffae3e54c2>] kthread+0x222/0x2e0
[<ffffffffae3e52a0>] ? kthread_park+0x80/0x80
[<ffffffffae3e52a0>] ? kthread_park+0x80/0x80
[<ffffffffae3e52a0>] ? kthread_park+0x80/0x80
[<ffffffffafdd86aa>] ret_from_fork+0x2a/0x40
Object at ffff8803fc244088, in cache kmalloc-1024 size: 1024
Allocated:
PID = 71
save_stack_trace+0x1b/0x20
save_stack+0x46/0xd0
kasan_kmalloc+0xad/0xe0
kasan_slab_alloc+0x12/0x20
__kmalloc_track_caller+0x134/0x360
kmemdup+0x20/0x50
brcmf_cfg80211_attach+0x10b/0x3a90 [brcmfmac]
brcmf_bus_start+0x19a/0x9a0 [brcmfmac]
brcmf_pcie_setup+0x1f1a/0x3680 [brcmfmac]
brcmf_fw_request_nvram_done+0x44c/0x11b0 [brcmfmac]
request_firmware_work_func+0x135/0x280
process_one_work+0x716/0x1a50
worker_thread+0xe0/0x1460
kthread+0x222/0x2e0
ret_from_fork+0x2a/0x40
Freed:
PID = 2568
save_stack_trace+0x1b/0x20
save_stack+0x46/0xd0
kasan_slab_free+0x71/0xb0
kfree+0xe8/0x2e0
brcmf_cfg80211_detach+0x62/0xf0 [brcmfmac]
brcmf_detach+0x14a/0x2b0 [brcmfmac]
brcmf_pcie_remove+0x140/0x5d0 [brcmfmac]
brcmf_pcie_pm_leave_D3+0x198/0x2e0 [brcmfmac]
pci_pm_resume+0x186/0x220
dpm_run_callback+0x6e/0x4f0
device_resume+0x1c2/0x670
async_resume+0x1d/0x50
async_run_entry_fn+0xfe/0x610
process_one_work+0x716/0x1a50
worker_thread+0xe0/0x1460
kthread+0x222/0x2e0
ret_from_fork+0x2a/0x40
Memory state around the buggy address: ffff8803fc243f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8803fc244000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8803fc244080: fc fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff8803fc244100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8803fc244180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
What is happening is that brcmf_pcie_resume() detects a device that
is no longer responsive and it decides to unbind resulting in a
wiphy_unregister() and wiphy_free() call. Now the wiphy instance
remains allocated, because PM needs to call wiphy_resume() for it.
However, brcmfmac already does a kfree() for the struct
cfg80211_registered_device::ops field. Change the checks in
wiphy_resume() to only access the struct cfg80211_registered_device::ops
if the wiphy instance is still registered at this time.
Cc: stable@vger.kernel.org # 4.10.x, 4.9.x Reported-by: Daniel J Blueman <daniel@quora.org> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jarno Rajahalme [Tue, 28 Mar 2017 18:25:26 +0000 (11:25 -0700)]
openvswitch: Fix refcount leak on force commit.
The reference count held for skb needs to be released when the skb's
nfct pointer is cleared regardless of if nf_ct_delete() is called or
not.
Failing to release the skb's reference cound led to deferred conntrack
cleanup spinning forever within nf_conntrack_cleanup_net_list() when
cleaning up a network namespace:
Fixes: dd41d33f0b03 ("openvswitch: Add force commit.") Reported-by: Yang Song <yangsong@vmware.com> Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 28 Mar 2017 14:11:18 +0000 (16:11 +0200)]
rocker: fix Wmaybe-uninitialized false-positive
gcc-7 reports a warning that earlier versions did not have:
drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_port_stp_update':
arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&prev_ctrls+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
*((short *)to + 2) = *((short *)from + 2);
~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/rocker/rocker_ofdpa.c:2218:7: note: '*((void *)&prev_ctrls+4)' was declared here
This is clearly a variation of the warning about 'prev_state' that
was shut up using uninitialized_var().
We can slightly simplify the code and get rid of the warning by unconditionally
saving the prev_state and prev_ctrls variables. The inlined memcpy is not
particularly expensive here, as it just has to read five bytes from one or
two cache lines.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / karo-tx-linux.git / log