From f51cdaf19141151ce2b40d562a468605340f2315 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 17 Jun 2010 11:37:20 -0500 Subject: [PATCH] 83xx/85xx/86xx: LBC register cleanup Currently, 83xx, 86xx, and 85xx have a lot of duplicated code dedicated to defining and manipulating the LBC registers. Merge this into a single spot. To do this, we have to decide on a common name for the data structure that holds the lbc registers - it will now be known as fsl_lbc_t, and we adopt a common name for the immap layouts that include the lbc - this was previously known as either im_lbc or lbus; use the former. In addition, create accessors for the BR/OR regs that use in/out_be32 and use those instead of the mismash of access methods currently in play. I have done a successful ppc build all and tested a board or two from each processor family. Signed-off-by: Becky Bruce Acked-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc83xx/cpu.c | 12 +- arch/powerpc/cpu/mpc83xx/cpu_init.c | 53 ++------- arch/powerpc/cpu/mpc83xx/nand_init.c | 4 +- arch/powerpc/cpu/mpc83xx/speed.c | 2 +- arch/powerpc/cpu/mpc85xx/cpu.c | 12 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 58 +--------- arch/powerpc/cpu/mpc85xx/cpu_init_nand.c | 6 +- arch/powerpc/cpu/mpc85xx/speed.c | 5 +- arch/powerpc/cpu/mpc86xx/cpu.c | 15 +-- arch/powerpc/cpu/mpc86xx/cpu_init.c | 55 +-------- arch/powerpc/cpu/mpc86xx/speed.c | 5 +- arch/powerpc/cpu/mpc8xxx/Makefile | 1 + arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 84 ++++++++++++++ arch/powerpc/include/asm/config.h | 6 + arch/powerpc/include/asm/fsl_lbc.h | 109 +++++++++++------- arch/powerpc/include/asm/immap_83xx.h | 13 ++- arch/powerpc/include/asm/immap_85xx.h | 46 +------- arch/powerpc/include/asm/immap_86xx.h | 49 +------- board/atum8548/atum8548.c | 2 +- board/esd/vme8349/vme8349.c | 2 +- board/freescale/mpc8313erdb/sdram.c | 2 +- board/freescale/mpc8349emds/mpc8349emds.c | 2 +- board/freescale/mpc8349itx/mpc8349itx.c | 7 +- board/freescale/mpc8360emds/mpc8360emds.c | 6 +- board/freescale/mpc8360erdk/nand.c | 6 +- board/freescale/mpc8540ads/mpc8540ads.c | 8 +- board/freescale/mpc8541cds/mpc8541cds.c | 13 +-- board/freescale/mpc8544ds/mpc8544ds.c | 2 +- board/freescale/mpc8548cds/mpc8548cds.c | 13 +-- board/freescale/mpc8555cds/mpc8555cds.c | 12 +- board/freescale/mpc8560ads/mpc8560ads.c | 8 +- board/freescale/mpc8568mds/mpc8568mds.c | 11 +- board/freescale/mpc8569mds/mpc8569mds.c | 2 +- board/mpc8540eval/mpc8540eval.c | 6 +- board/pm854/pm854.c | 2 +- board/pm856/pm856.c | 2 +- board/sbc8349/sbc8349.c | 2 +- board/sbc8548/sbc8548.c | 20 +--- board/sbc8560/sbc8560.c | 6 +- board/sheldon/simpc8313/sdram.c | 2 +- board/sheldon/simpc8313/simpc8313.c | 2 +- board/socrates/socrates.c | 31 +++-- board/tqc/tqm834x/tqm834x.c | 8 +- board/tqc/tqm85xx/nand.c | 12 +- board/tqc/tqm85xx/tqm85xx.c | 35 +++--- board/xes/xpedite5170/xpedite5170.c | 10 +- board/xes/xpedite5200/xpedite5200.c | 11 +- board/xes/xpedite5370/xpedite5370.c | 9 +- drivers/mtd/nand/fsl_elbc_nand.c | 18 ++- include/mpc85xx.h | 2 - .../board/freescale/mpc8536ds/nand_boot.c | 5 +- nand_spl/nand_boot_fsl_elbc.c | 4 +- 52 files changed, 318 insertions(+), 500 deletions(-) create mode 100644 arch/powerpc/cpu/mpc8xxx/fsl_lbc.c diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index 42387b49e0..86a24fd333 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -157,16 +157,16 @@ int checkcpu(void) void upmconfig (uint upm, uint *table, uint size) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; volatile uchar *dummy = NULL; const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */ - volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */ + volatile u32 *mxmr = &lbc->mamr + upm; /* ptr to mamr, mbmr, or mcmr */ uint i; - /* Scan all the banks to determine the base address of the device */ + /* Find the address for the dummy write transaction */ for (i = 0; i < 8; i++) { - if ((lbus->bank[i].br & BR_MSEL) == msel) { - dummy = (uchar *) (lbus->bank[i].br & BR_BA); + if ((get_lbc_br(i) & BR_MSEL) == msel) { + dummy = (uchar *) (get_lbc_br(i) & BR_BA); break; } } @@ -180,7 +180,7 @@ void upmconfig (uint upm, uint *table, uint size) *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000; for (i = 0; i < size; i++) { - lbus->mdr = table[i]; + lbc->mdr = table[i]; __asm__ __volatile__ ("sync"); *dummy = 0; /* Write the value to memory and increment MAD */ __asm__ __volatile__ ("sync"); diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index f3b67ae2b9..83cba93605 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -236,8 +236,8 @@ void cpu_init_f (volatile immap_t * im) /* LCRR - Clock Ratio Register (10.3.1.16) * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description */ - clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val); - __raw_readl(&im->lbus.lcrr); + clrsetbits_be32(&im->im_lbc.lcrr, lcrr_mask, lcrr_val); + __raw_readl(&im->im_lbc.lcrr); isync(); /* Enable Time Base & Decrementer ( so we will have udelay() )*/ @@ -267,80 +267,41 @@ void cpu_init_f (volatile immap_t * im) /* Config QE ioports */ config_qe_ioports(); #endif + /* Set up preliminary BR/OR regs */ + init_early_memctl_regs(); - /* - * Memory Controller: - */ - - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_BR0_PRELIM) \ - && defined(CONFIG_SYS_OR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \ - && defined(CONFIG_SYS_LBLAWAR0_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM; + /* Local Access window setup */ +#if defined(CONFIG_SYS_LBLAWBAR0_PRELIM) && defined(CONFIG_SYS_LBLAWAR0_PRELIM) im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM; #else -#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined +#error CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined #endif -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM; - im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM) im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM; im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM; #endif -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM; - im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM) im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM; im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM; #endif -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM; - im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM) im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM; im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM; #endif -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM; - im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM) im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM; im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM; #endif -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM; - im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM) im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM; im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM; #endif -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM; - im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM) im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM; im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM; #endif -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM; - im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM; -#endif #if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM) im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM; im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM; diff --git a/arch/powerpc/cpu/mpc83xx/nand_init.c b/arch/powerpc/cpu/mpc83xx/nand_init.c index 38e141a828..d1648b7810 100644 --- a/arch/powerpc/cpu/mpc83xx/nand_init.c +++ b/arch/powerpc/cpu/mpc83xx/nand_init.c @@ -88,8 +88,8 @@ void cpu_init_f (volatile immap_t * im) && defined(CONFIG_SYS_NAND_OR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \ && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM) - im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM; - im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM; + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM; im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM; #else diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index d04b192599..93e9f1c3f9 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -393,7 +393,7 @@ int get_clocks(void) lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); - lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; + lcrr = (im->im_lbc.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT; switch (lcrr) { case 2: case 4: diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 6f81fdf61b..9cf2ef9c76 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -257,8 +257,7 @@ void upmconfig (uint upm, uint * table, uint size) { int i, mdr, mad, old_mad = 0; volatile u32 *mxmr; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - volatile u32 *brp,*orp; + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile u8* dummy = NULL; int upmmask; @@ -281,12 +280,9 @@ void upmconfig (uint upm, uint * table, uint size) } /* Find the address for the dummy write transaction */ - for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8; - i++, brp += 2, orp += 2) { - - /* Look for a valid BR with selected UPM */ - if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) { - dummy = (volatile u8*)(in_be32(brp) & BR_BA); + for (i = 0; i < 8; i++) { + if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) { + dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); break; } } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 99431dc1a7..d491e2ad5a 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -154,7 +154,6 @@ static void corenet_tb_init(void) void cpu_init_f (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); extern void m8560_cpm_reset (void); #ifdef CONFIG_MPC8548 ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); @@ -177,60 +176,7 @@ void cpu_init_f (void) config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR); #endif - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ -#if defined(CONFIG_SYS_OR0_REMAP) - out_be32(&memctl->or0, CONFIG_SYS_OR0_REMAP); -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - out_be32(&memctl->or1, CONFIG_SYS_OR1_REMAP); -#endif - - /* now restrict to preliminary range */ - /* if cs1 is already set via debugger, leave cs0/cs1 alone */ - if (! memctl->br1 & 1) { -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - out_be32(&memctl->br0, CONFIG_SYS_BR0_PRELIM); - out_be32(&memctl->or0, CONFIG_SYS_OR0_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - out_be32(&memctl->or1, CONFIG_SYS_OR1_PRELIM); - out_be32(&memctl->br1, CONFIG_SYS_BR1_PRELIM); -#endif - } - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - out_be32(&memctl->or2, CONFIG_SYS_OR2_PRELIM); - out_be32(&memctl->br2, CONFIG_SYS_BR2_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - out_be32(&memctl->or3, CONFIG_SYS_OR3_PRELIM); - out_be32(&memctl->br3, CONFIG_SYS_BR3_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - out_be32(&memctl->or4, CONFIG_SYS_OR4_PRELIM); - out_be32(&memctl->br4, CONFIG_SYS_BR4_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - out_be32(&memctl->or5, CONFIG_SYS_OR5_PRELIM); - out_be32(&memctl->br5, CONFIG_SYS_BR5_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - out_be32(&memctl->or6, CONFIG_SYS_OR6_PRELIM); - out_be32(&memctl->br6, CONFIG_SYS_BR6_PRELIM); -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - out_be32(&memctl->or7, CONFIG_SYS_OR7_PRELIM); - out_be32(&memctl->br7, CONFIG_SYS_BR7_PRELIM); -#endif + init_early_memctl_regs(); #if defined(CONFIG_CPM2) m8560_cpm_reset(); @@ -263,7 +209,7 @@ void cpu_init_f (void) int cpu_init_r(void) { #ifdef CONFIG_SYS_LBC_LCRR - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; #endif puts ("L2: "); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c index 184cca4c54..8fb27abc55 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c @@ -25,7 +25,7 @@ void cpu_init_f(void) { - ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + fsl_lbc_t *lbc = LBC_BASE_ADDR; /* * LCRR - Clock Ratio Register - set up local bus timing @@ -34,8 +34,8 @@ void cpu_init_f(void) out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8); #if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM) - out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM); - out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM); + set_lbc_br(0, CONFIG_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_NAND_OR_PRELIM); #else #error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined #endif diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 8132115fca..dd4c6b3e98 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -172,10 +172,7 @@ void get_sys_info (sys_info_t * sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { #if defined(CONFIG_FSL_CORENET) diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index 9064e78037..4e90fd2203 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -180,22 +180,9 @@ watchdog_reset(void) */ void mpc86xx_reginfo(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; - print_bats(); print_laws(); - - printf ("Local Bus Controller Registers\n" - "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0)); - printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1)); - printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2)); - printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3)); - printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4)); - printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5)); - printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6)); - printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7)); - + print_lbc_regs(); } /* diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c index b4f047d85d..82c216ba5d 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c @@ -46,9 +46,6 @@ DECLARE_GLOBAL_DATA_PTR; void cpu_init_f(void) { - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_lbc_t *memctl = &immap->im_lbc; - /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -61,58 +58,8 @@ void cpu_init_f(void) setup_bats(); - /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary - * addresses - these have to be modified later when FLASH size - * has been determined - */ - -#if defined(CONFIG_SYS_OR0_REMAP) - memctl->or0 = CONFIG_SYS_OR0_REMAP; -#endif -#if defined(CONFIG_SYS_OR1_REMAP) - memctl->or1 = CONFIG_SYS_OR1_REMAP; -#endif - - /* now restrict to preliminary range */ -#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) - memctl->br0 = CONFIG_SYS_BR0_PRELIM; - memctl->or0 = CONFIG_SYS_OR0_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) - memctl->or1 = CONFIG_SYS_OR1_PRELIM; - memctl->br1 = CONFIG_SYS_BR1_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) - memctl->or2 = CONFIG_SYS_OR2_PRELIM; - memctl->br2 = CONFIG_SYS_BR2_PRELIM; -#endif + init_early_memctl_regs(); -#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) - memctl->or3 = CONFIG_SYS_OR3_PRELIM; - memctl->br3 = CONFIG_SYS_BR3_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) - memctl->or4 = CONFIG_SYS_OR4_PRELIM; - memctl->br4 = CONFIG_SYS_BR4_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) - memctl->or5 = CONFIG_SYS_OR5_PRELIM; - memctl->br5 = CONFIG_SYS_BR5_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) - memctl->or6 = CONFIG_SYS_OR6_PRELIM; - memctl->br6 = CONFIG_SYS_BR6_PRELIM; -#endif - -#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) - memctl->or7 = CONFIG_SYS_OR7_PRELIM; - memctl->br7 = CONFIG_SYS_BR7_PRELIM; -#endif #if defined(CONFIG_FSL_DMA) dma_init(); #endif diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c index 64a3479d7e..a2d0a8ac6e 100644 --- a/arch/powerpc/cpu/mpc86xx/speed.c +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -97,10 +97,7 @@ void get_sys_info(sys_info_t *sysInfo) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; #else - { - volatile ccsr_lbc_t *lbc = &immap->im_lbc; - lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV; - } + lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 67bb5cfe09..ea5122289e 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -16,6 +16,7 @@ COBJS-$(CONFIG_PCI) += pci_cfg.o endif COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c new file mode 100644 index 0000000000..e0a15c4382 --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -0,0 +1,84 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include +#include + +void print_lbc_regs(void) +{ + int i; + + printf("\nLocal Bus Controller Registers\n"); + for (i = 0; i < 8; i++) { + printf("BR%d\t0x%08X\tOR%d\t0x%08X\n", + i, get_lbc_br(i), i, get_lbc_or(i)); + } +} + +void init_early_memctl_regs(void) +{ + uint init_br1 = 1; + +#ifdef CONFIG_MPC85xx + /* if cs1 is already set via debugger, leave cs0/cs1 alone */ + if (get_lbc_br(1) & BR_V) + init_br1 = 0; +#endif + + /* + * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at + * preliminary addresses - these have to be modified later + * when FLASH size has been determined + */ +#if defined(CONFIG_SYS_OR0_REMAP) + set_lbc_or(0, CONFIG_SYS_OR0_REMAP); +#endif +#if defined(CONFIG_SYS_OR1_REMAP) + set_lbc_or(1, CONFIG_SYS_OR1_REMAP); +#endif + /* now restrict to preliminary range */ + if (init_br1) { + set_lbc_br(0, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR0_PRELIM); + +#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) + set_lbc_or(1, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR1_PRELIM); +#endif + } + +#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) + set_lbc_or(5, CONFIG_SYS_OR5_PRELIM); + set_lbc_br(5, CONFIG_SYS_BR5_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) + set_lbc_or(6, CONFIG_SYS_OR6_PRELIM); + set_lbc_br(6, CONFIG_SYS_BR6_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) + set_lbc_or(7, CONFIG_SYS_OR7_PRELIM); + set_lbc_br(7, CONFIG_SYS_BR7_PRELIM); +#endif +} diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 75e19a5746..d88c282f75 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -85,4 +85,10 @@ /* Relocation to SDRAM works on all PPC boards */ #define CONFIG_RELOC_FIXUP_WORKS +/* Since so many PPC SOCs have a semi-common LBC, define this here */ +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \ + defined(CONFIG_MPC83xx) +#define CONFIG_FSL_LBC +#endif + #endif /* _ASM_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 03ae6a765b..33e6dd996c 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -14,6 +14,7 @@ #define __ASM_PPC_FSL_LBC_H #include +#include /* BR - Base Registers */ @@ -453,49 +454,69 @@ #define LTESR_CC 0x00000001 #ifndef __ASSEMBLY__ -/* - * Local Bus Controller Registers. - */ -typedef struct lbus_bank { - u32 br; /* Base Register */ - u32 or; /* Option Register */ -} lbus_bank_t; - -typedef struct fsl_lbus { - lbus_bank_t bank[8]; - u8 res0[0x28]; - u32 mar; /* UPM Address Register */ - u8 res1[0x4]; - u32 mamr; /* UPMA Mode Register */ - u32 mbmr; /* UPMB Mode Register */ - u32 mcmr; /* UPMC Mode Register */ - u8 res2[0x8]; - u32 mrtpr; /* Memory Refresh Timer Prescaler Register */ - u32 mdr; /* UPM Data Register */ - u8 res3[0x4]; - u32 lsor; /* Special Operation Initiation Register */ - u32 lsdmr; /* SDRAM Mode Register */ - u8 res4[0x8]; - u32 lurt; /* UPM Refresh Timer */ - u32 lsrt; /* SDRAM Refresh Timer */ - u8 res5[0x8]; - u32 ltesr; /* Transfer Error Status Register */ - u32 ltedr; /* Transfer Error Disable Register */ - u32 lteir; /* Transfer Error Interrupt Register */ - u32 lteatr; /* Transfer Error Attributes Register */ - u32 ltear; /* Transfer Error Address Register */ - u8 res6[0xC]; - u32 lbcr; /* Configuration Register */ - u32 lcrr; /* Clock Ratio Register */ - u8 res7[0x8]; - u32 fmr; /* Flash Mode Register */ - u32 fir; /* Flash Instruction Register */ - u32 fcr; /* Flash Command Register */ - u32 fbar; /* Flash Block Addr Register */ - u32 fpar; /* Flash Page Addr Register */ - u32 fbcr; /* Flash Byte Count Register */ - u8 res8[0xF08]; -} fsl_lbus_t; -#endif /* __ASSEMBLY__ */ +#include + +extern void print_lbc_regs(void); +extern void init_early_memctl_regs(void); + +#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR) +#define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br)) +#define get_lbc_or(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].or)) +#define set_lbc_br(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].br, v)) +#define set_lbc_or(i, v) (out_be32(&(LBC_BASE_ADDR)->bank[i].or, v)) + +typedef struct lbc_bank { + u32 br; + u32 or; +} lbc_bank_t; +/* Local Bus Controller Registers */ +typedef struct fsl_lbc { + lbc_bank_t bank[8]; + u8 res1[40]; + u32 mar; /* LBC UPM Addr */ + u8 res2[4]; + u32 mamr; /* LBC UPMA Mode */ + u32 mbmr; /* LBC UPMB Mode */ + u32 mcmr; /* LBC UPMC Mode */ + u8 res3[8]; + u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ + u32 mdr; /* LBC UPM Data */ +#ifdef CONFIG_FSL_ELBC + u8 res4[4]; + u32 lsor; + u8 res5[12]; + u32 lurt; /* LBC UPM Refresh Timer */ + u8 res6[4]; +#else + u8 res4[8]; + u32 lsdmr; /* LBC SDRAM Mode */ + u8 res5[8]; + u32 lurt; /* LBC UPM Refresh Timer */ + u32 lsrt; /* LBC SDRAM Refresh Timer */ +#endif + u8 res7[8]; + u32 ltesr; /* LBC Transfer Error Status */ + u32 ltedr; /* LBC Transfer Error Disable */ + u32 lteir; /* LBC Transfer Error IRQ */ + u32 lteatr; /* LBC Transfer Error Attrs */ + u32 ltear; /* LBC Transfer Error Addr */ + u8 res8[12]; + u32 lbcr; /* LBC Configuration */ + u32 lcrr; /* LBC Clock Ratio */ +#ifdef CONFIG_NAND_FSL_ELBC + u8 res9[0x8]; + u32 fmr; /* Flash Mode Register */ + u32 fir; /* Flash Instruction Register */ + u32 fcr; /* Flash Command Register */ + u32 fbar; /* Flash Block Addr Register */ + u32 fpar; /* Flash Page Addr Register */ + u32 fbcr; /* Flash Byte Count Register */ + u8 res10[0xF08]; +#else + u8 res9[0xF28]; +#endif +} fsl_lbc_t; + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_PPC_FSL_LBC_H */ diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 3a9cdc4f8d..cc0293acd4 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -646,7 +646,7 @@ typedef struct immap { u8 res2[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res3[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res4[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -686,7 +686,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -721,7 +721,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -766,7 +766,7 @@ typedef struct immap { u8 res1[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res3[0x1000]; spi8xxx_t spi; /* Serial Peripheral Interface */ dma83xx_t dma; /* DMA */ @@ -816,7 +816,7 @@ typedef struct immap { u8 res4[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res5[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res6[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -855,7 +855,7 @@ typedef struct immap { u8 res3[0x1300]; duart83xx_t duart[2]; /* DUART */ u8 res4[0x900]; - fsl_lbus_t lbus; /* Local Bus Controller Registers */ + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ u8 res5[0x2000]; dma83xx_t dma; /* DMA */ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */ @@ -879,6 +879,7 @@ typedef struct immap { #endif #define CONFIG_SYS_MPC83xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET) +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 88e1ea3bcb..4e665d3994 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -266,50 +266,6 @@ typedef struct ccsr_duart { } ccsr_duart_t; #endif -/* Local Bus Controller Registers */ -typedef struct ccsr_lbc { - u32 br0; /* LBC Base 0 */ - u32 or0; /* LBC Options 0 */ - u32 br1; /* LBC Base 1 */ - u32 or1; /* LBC Options 1 */ - u32 br2; /* LBC Base 2 */ - u32 or2; /* LBC Options 2 */ - u32 br3; /* LBC Base 3 */ - u32 or3; /* LBC Options 3 */ - u32 br4; /* LBC Base 4 */ - u32 or4; /* LBC Options 4 */ - u32 br5; /* LBC Base 5 */ - u32 or5; /* LBC Options 5 */ - u32 br6; /* LBC Base 6 */ - u32 or6; /* LBC Options 6 */ - u32 br7; /* LBC Base 7 */ - u32 or7; /* LBC Options 7 */ - u8 res1[40]; - u32 mar; /* LBC UPM Addr */ - u8 res2[4]; - u32 mamr; /* LBC UPMA Mode */ - u32 mbmr; /* LBC UPMB Mode */ - u32 mcmr; /* LBC UPMC Mode */ - u8 res3[8]; - u32 mrtpr; /* LBC Memory Refresh Timer Prescaler */ - u32 mdr; /* LBC UPM Data */ - u8 res4[8]; - u32 lsdmr; /* LBC SDRAM Mode */ - u8 res5[8]; - u32 lurt; /* LBC UPM Refresh Timer */ - u32 lsrt; /* LBC SDRAM Refresh Timer */ - u8 res6[8]; - u32 ltesr; /* LBC Transfer Error Status */ - u32 ltedr; /* LBC Transfer Error Disable */ - u32 lteir; /* LBC Transfer Error IRQ */ - u32 lteatr; /* LBC Transfer Error Attrs */ - u32 ltear; /* LBC Transfer Error Addr */ - u8 res7[12]; - u32 lbcr; /* LBC Configuration */ - u32 lcrr; /* LBC Clock Ratio */ - u8 res8[3880]; -} ccsr_lbc_t; - /* eSPI Registers */ typedef struct ccsr_espi { u32 mode; /* eSPI mode */ @@ -2147,7 +2103,7 @@ typedef struct ccsr_sec { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET) #define CONFIG_SYS_MPC85xx_DDR2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET) -#define CONFIG_SYS_MPC85xx_LBC_ADDR \ +#define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) #define CONFIG_SYS_MPC85xx_ESPI_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET) diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index fd7acdb767..b9e02dbc79 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -12,6 +12,7 @@ #include #include +#include #include /* Local-Access Registers and MCM Registers(0x0000-0x2000) */ @@ -190,51 +191,6 @@ typedef struct ccsr_duart { char res5[2543]; } ccsr_duart_t; - -/* Local Bus Controller Registers(0x5000-0x6000) */ -typedef struct ccsr_lbc { - uint br0; /* 0x5000 - LBC Base Register 0 */ - uint or0; /* 0x5004 - LBC Options Register 0 */ - uint br1; /* 0x5008 - LBC Base Register 1 */ - uint or1; /* 0x500c - LBC Options Register 1 */ - uint br2; /* 0x5010 - LBC Base Register 2 */ - uint or2; /* 0x5014 - LBC Options Register 2 */ - uint br3; /* 0x5018 - LBC Base Register 3 */ - uint or3; /* 0x501c - LBC Options Register 3 */ - uint br4; /* 0x5020 - LBC Base Register 4 */ - uint or4; /* 0x5024 - LBC Options Register 4 */ - uint br5; /* 0x5028 - LBC Base Register 5 */ - uint or5; /* 0x502c - LBC Options Register 5 */ - uint br6; /* 0x5030 - LBC Base Register 6 */ - uint or6; /* 0x5034 - LBC Options Register 6 */ - uint br7; /* 0x5038 - LBC Base Register 7 */ - uint or7; /* 0x503c - LBC Options Register 7 */ - char res1[40]; - uint mar; /* 0x5068 - LBC UPM Address Register */ - char res2[4]; - uint mamr; /* 0x5070 - LBC UPMA Mode Register */ - uint mbmr; /* 0x5074 - LBC UPMB Mode Register */ - uint mcmr; /* 0x5078 - LBC UPMC Mode Register */ - char res3[8]; - uint mrtpr; /* 0x5084 - LBC Memory Refresh Timer Prescaler Register */ - uint mdr; /* 0x5088 - LBC UPM Data Register */ - char res4[8]; - uint lsdmr; /* 0x5094 - LBC SDRAM Mode Register */ - char res5[8]; - uint lurt; /* 0x50a0 - LBC UPM Refresh Timer */ - uint lsrt; /* 0x50a4 - LBC SDRAM Refresh Timer */ - char res6[8]; - uint ltesr; /* 0x50b0 - LBC Transfer Error Status Register */ - uint ltedr; /* 0x50b4 - LBC Transfer Error Disable Register */ - uint lteir; /* 0x50b8 - LBC Transfer Error Interrupt Register */ - uint lteatr; /* 0x50bc - LBC Transfer Error Attributes Register */ - uint ltear; /* 0x50c0 - LBC Transfer Error Address Register */ - char res7[12]; - uint lbcr; /* 0x50d0 - LBC Configuration Register */ - uint lcrr; /* 0x50d4 - LBC Clock Ratio Register */ - char res8[3880]; -} ccsr_lbc_t; - /* PCI Express Registers(0x8000-0x9000) and (0x9000-0xA000) */ typedef struct ccsr_pex { uint cfg_addr; /* 0x8000 - PEX Configuration Address Register */ @@ -1270,7 +1226,7 @@ typedef struct immap { ccsr_ddr_t im_ddr1; ccsr_i2c_t im_i2c; ccsr_duart_t im_duart; - ccsr_lbc_t im_lbc; + fsl_lbc_t im_lbc; ccsr_ddr_t im_ddr2; char res1[4096]; ccsr_pex_t im_pex1; @@ -1303,6 +1259,7 @@ extern immap_t *immr; #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #define CONFIG_SYS_MDIO1_OFFSET 0x24000 +#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index c11a5c3499..4f7d935df3 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -47,7 +47,7 @@ int board_early_init_f (void) int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); if ((uint)&gur->porpllsr != 0xe00e0000) { diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c index b0ebad72b2..96698e7203 100644 --- a/board/esd/vme8349/vme8349.c +++ b/board/esd/vme8349/vme8349.c @@ -105,7 +105,7 @@ int misc_init_r() { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - clrsetbits_be32(&im->lbus.lcrr, LBCR_LDIS, 0); + clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0); return 0; } diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 0c4fd6854d..7aede136d6 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -110,7 +110,7 @@ static long fixed_sdram(void) phys_size_t initdram(int board_type) { volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 61d124960f..365ac3792f 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -192,7 +192,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; /* diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 7da39f18eb..56475795b6 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -221,15 +221,14 @@ int misc_init_f(void) 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01 }; volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbus = &immap->lbus; - lbus->bank[3].br = CONFIG_SYS_BR3_PRELIM; - lbus->bank[3].or = CONFIG_SYS_OR3_PRELIM; + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000, GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000 */ - lbus->mamr = 0x08404440; + immap->im_lbc.mamr = 0x08404440; upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0])); diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 4f557329f4..59ada9ca75 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -280,7 +280,7 @@ int checkboard(void) static int sdram_init(unsigned int base) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + fsl_lbc_t *lbc = LBC_BASE_ADDR; const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024; int rem = base % sdram_size; uint *sdram_addr; @@ -293,8 +293,8 @@ static int sdram_init(unsigned int base) /* * Setup SDRAM Base and Option Registers */ - immap->lbus.bank[2].br = base | CONFIG_SYS_BR2; - immap->lbus.bank[2].or = CONFIG_SYS_OR2; + set_lbc_br(2, base | CONFIG_SYS_BR2); + set_lbc_or(2, CONFIG_SYS_OR2); immap->sysconf.lblaw[2].bar = base; immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2; diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c index 9ffffb436c..92d56a3dad 100644 --- a/board/freescale/mpc8360erdk/nand.c +++ b/board/freescale/mpc8360erdk/nand.c @@ -82,9 +82,9 @@ static struct fsl_upm_nand fun = { int board_nand_init(struct nand_chip *nand) { - fun.upm.mxmr = &im->lbus.mamr; - fun.upm.mdr = &im->lbus.mdr; - fun.upm.mar = &im->lbus.mar; + fun.upm.mxmr = &im->im_lbc.mamr; + fun.upm.mdr = &im->im_lbc.mdr; + fun.upm.mar = &im->im_lbc.mar; upm_setup(&fun.upm); diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 9e3f67768c..f9ff827f47 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -117,7 +117,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -176,7 +176,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); @@ -185,8 +185,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index c30d966b6e..0580fe7239 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,16 +352,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 0be2d892d3..581d5f26ed 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -40,7 +40,7 @@ int checkboard (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); u8 vboot; u8 *pixis_base = (u8 *)PIXIS_BASE; diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index aa3f32bf67..f0169959af 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -118,7 +118,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -154,7 +154,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -166,16 +166,11 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index ecddd0d9c4..b7e0e0cd82 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -291,7 +291,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -340,7 +340,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint cpu_board_rev; uint lsdmr_common; @@ -352,12 +352,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; - asm("msync"); - + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 2bca0f28eb..489f90b14b 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -322,7 +322,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -381,7 +381,7 @@ local_bus_init(void) void sdram_init(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); @@ -390,8 +390,8 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 4ec13a9691..036bf9528b 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -181,7 +181,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -214,7 +214,7 @@ sdram_init(void) #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; @@ -225,16 +225,13 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - lbc->or2 = CONFIG_SYS_OR2_PRELIM; - asm("msync"); - - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); asm("msync"); lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("msync"); diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 1eddeef37f..81e8ff51e9 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -308,7 +308,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index 7c272334aa..054d644d95 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -69,7 +69,7 @@ phys_size_t initdram (int board_type) long dram_size = 0; #if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -110,8 +110,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index 5353d738b4..a302b91767 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -134,7 +134,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index b14a3d34b1..f9d92d9984 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -290,7 +290,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 34861d4e15..50fae7c367 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -160,7 +160,7 @@ int checkboard (void) void sdram_init(void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc = &immap->lbus; + volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts("\n SDRAM on Local Bus: "); diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 194f6ab961..d62cfd1bef 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -116,7 +116,7 @@ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; uint lbc_hz; @@ -152,7 +152,7 @@ sdram_init(void) #if defined(CONFIG_SYS_LBC_SDRAM_SIZE) uint idx; - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; @@ -163,22 +163,14 @@ sdram_init(void) /* * Setup SDRAM Base and Option Registers */ - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); - asm("msync"); - - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - asm("msync"); - - out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM); - asm("msync"); - - out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM); - asm("msync"); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); asm("msync"); - out_be32(&lbc->lsrt, CONFIG_SYS_LBC_LSRT); out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); asm("msync"); diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index c40b5e38dd..10ba62fa49 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -269,7 +269,7 @@ phys_size_t initdram (int board_type) #if 0 #if !defined(CONFIG_RAM_AS_FLASH) - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sysinfo; uint temp_lbcdll = 0; #endif @@ -310,8 +310,8 @@ phys_size_t initdram (int board_type) gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } - lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ - lbc->br2 = CONFIG_SYS_BR2_PRELIM; + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); diff --git a/board/sheldon/simpc8313/sdram.c b/board/sheldon/simpc8313/sdram.c index ebb70a2327..ba59943c80 100644 --- a/board/sheldon/simpc8313/sdram.c +++ b/board/sheldon/simpc8313/sdram.c @@ -129,7 +129,7 @@ void si_read_i2c(u32 lbyte, int count, u8 *buffer) phys_size_t initdram(int board_type) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile fsl_lbus_t *lbc= &im->lbus; + volatile fsl_lbc_t *lbc = &im->im_lbc; u32 msize; if ((__raw_readl(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32) im) diff --git a/board/sheldon/simpc8313/simpc8313.c b/board/sheldon/simpc8313/simpc8313.c index cb30b48859..c2164c9c85 100644 --- a/board/sheldon/simpc8313/simpc8313.c +++ b/board/sheldon/simpc8313/simpc8313.c @@ -93,7 +93,7 @@ int misc_init_r(void) { int rc = 0; immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - fsl_lbus_t *lbus = &immap->lbus; + fsl_lbc_t *lbus = &immap->im_lbc; u32 *mxmr = &lbus->mamr; /* Pointer to mamr */ /* UPM Table Configuration Code */ diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 9183c15f2a..72e7401f14 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -87,8 +87,6 @@ int checkboard (void) int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -99,8 +97,10 @@ int misc_init_r (void) * Check if boot FLASH isn't max size */ if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) { - memctl->or0 = gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = gd->bd->bi_flashstart | (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, gd->bd->bi_flashstart | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); /* * Re-check to get correct base address @@ -112,8 +112,8 @@ int misc_init_r (void) * Check if only one FLASH bank is available */ if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0); /* * Re-do flash protection upon new addresses @@ -148,7 +148,7 @@ int misc_init_r (void) */ void local_bus_init (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); sys_info_t sysinfo; uint clkdiv; @@ -299,26 +299,25 @@ const gdc_regs *board_get_regs (void) int lime_probe(void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint cfg_br2; uint cfg_or2; int type; - cfg_br2 = memctl->br2; - cfg_or2 = memctl->or2; + cfg_br2 = get_lbc_br(2); + cfg_or2 = get_lbc_or(2); /* Configure GPCM for CS2 */ - memctl->br2 = 0; - memctl->or2 = 0xfc000410; - memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901; + set_lbc_br(2, 0); + set_lbc_or(2, 0xfc000410); + set_lbc_br(2, (CONFIG_SYS_LIME_BASE) | 0x00001901); /* Get controller type */ type = mb862xx_probe(CONFIG_SYS_LIME_BASE); /* Restore previous CS2 configuration */ - memctl->br2 = 0; - memctl->or2 = cfg_or2; - memctl->br2 = cfg_br2; + set_lbc_br(2, 0); + set_lbc_or(2, cfg_or2); + set_lbc_br(2, cfg_br2); return (type == MB862XX_TYPE_LIME) ? 1 : 0; } diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index e5648799a6..8d046f482f 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -253,10 +253,10 @@ static int detect_num_flash_banks(void) debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks); /* set OR0 and BR0 */ - im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH | - (-(total_size) & OR_GPCM_AM); - im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) | - (BR_MS_GPCM | BR_PS_32 | BR_V); + set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH | + (-(total_size) & OR_GPCM_AM)); + set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) | + (BR_MS_GPCM | BR_PS_32 | BR_V)); return (0); } diff --git a/board/tqc/tqm85xx/nand.c b/board/tqc/tqm85xx/nand.c index 3da689a9e4..4b16c31de2 100644 --- a/board/tqc/tqm85xx/nand.c +++ b/board/tqc/tqm85xx/nand.c @@ -377,7 +377,7 @@ volatile const u32 *nand_upm_patt; */ static void upmb_write (u_char addr, ulong val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; out_be32 (&lbc->mdr, val); @@ -393,14 +393,14 @@ static void upmb_write (u_char addr, ulong val) /* * Initialize UPM for NAND flash access. */ -static void nand_upm_setup (volatile ccsr_lbc_t *lbc) +static void nand_upm_setup (volatile fsl_lbc_t *lbc) { uint i, j; uint or3 = CONFIG_SYS_OR3_PRELIM; uint clock = get_lbc_clock (); - out_be32 (&lbc->br3, 0); /* disable bank and reset all bits */ - out_be32 (&lbc->br3, CONFIG_SYS_BR3_PRELIM); + set_lbc_br(3, 0); /* disable bank and reset all bits */ + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); /* * Search appropriate UPM table for bus clock. @@ -424,7 +424,7 @@ static void nand_upm_setup (volatile ccsr_lbc_t *lbc) /* EAD must be set due to TQM8548 timing specification */ or3 |= OR_UPM_EAD; - out_be32 (&lbc->or3, or3); + set_lbc_or(3, or3); /* Assign address of table */ nand_upm_patt = upm_freq_table[i].upm_patt; @@ -458,7 +458,7 @@ void board_nand_select_device (struct nand_chip *nand, int chip) int board_nand_init (struct nand_chip *nand) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; if (!nand_upm_patt) nand_upm_setup (lbc); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 8c9d586925..fc2a6cbdb5 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -269,8 +269,6 @@ int checkboard (void) int misc_init_r (void) { - volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); - /* * Adjust flash start and offset to detected values */ @@ -281,26 +279,27 @@ int misc_init_r (void) * Recalculate CS configuration if second FLASH bank is available */ if (flash_info[0].size > 0) { - memctl->or1 = ((-flash_info[0].size) & 0xffff8000) | - (CONFIG_SYS_OR1_PRELIM & 0x00007fff); - memctl->br1 = gd->bd->bi_flashstart | - (CONFIG_SYS_BR1_PRELIM & 0x00007fff); + set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) | + (CONFIG_SYS_OR1_PRELIM & 0x00007fff)); + set_lbc_br(1, gd->bd->bi_flashstart | + (CONFIG_SYS_BR1_PRELIM & 0x00007fff)); /* * Re-check to get correct base address for bank 1 */ flash_get_size (gd->bd->bi_flashstart, 0); } else { - memctl->or1 = 0; - memctl->br1 = 0; + set_lbc_or(1, 0); + set_lbc_br(1, 0); } /* * If bank 1 is equipped, bank 0 is mapped after bank 1 */ - memctl->or0 = ((-flash_info[1].size) & 0xffff8000) | - (CONFIG_SYS_OR0_PRELIM & 0x00007fff); - memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) | - (CONFIG_SYS_BR0_PRELIM & 0x00007fff); + set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) | + (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); + set_lbc_br(0, gd->bd->bi_flashstart | + (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); + /* * Re-check to get correct base address for bank 0 */ @@ -341,7 +340,7 @@ int misc_init_r (void) */ static void upmc_write (u_char addr, uint val) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; out_be32 (&lbc->mdr, val); @@ -358,7 +357,7 @@ static void upmc_write (u_char addr, uint val) uint get_lbc_clock (void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sys_info; ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; @@ -386,7 +385,7 @@ uint get_lbc_clock (void) void local_bus_init (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint lbc_mhz = get_lbc_clock () / 1000000; #ifdef CONFIG_MPC8548 @@ -502,10 +501,10 @@ void local_bus_init (void) * set if Local Bus Clock is > 83 MHz. */ if (lbc_mhz > 83) - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); + set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); else - out_be32 (&lbc->or2, CONFIG_SYS_OR2_CAN); - out_be32 (&lbc->br2, CONFIG_SYS_BR2_CAN); + set_lbc_or(2, CONFIG_SYS_OR2_CAN); + set_lbc_br(2, CONFIG_SYS_BR2_CAN); /* LGPL4 is UPWAIT */ out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c index f4231a9a7a..58229418f3 100644 --- a/board/xes/xpedite5170/xpedite5170.c +++ b/board/xes/xpedite5170/xpedite5170.c @@ -56,8 +56,6 @@ int checkboard(void) */ static void flash_cs_fixup(void) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - ccsr_lbc_t *lbc = &immap->im_lbc; int flash_sel; /* @@ -70,11 +68,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/board/xes/xpedite5200/xpedite5200.c b/board/xes/xpedite5200/xpedite5200.c index 7109771515..a2627f8673 100644 --- a/board/xes/xpedite5200/xpedite5200.c +++ b/board/xes/xpedite5200/xpedite5200.c @@ -38,7 +38,7 @@ extern void ft_board_pci_setup(void *blob, bd_t *bd); int checkboard(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); + volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); char *s; @@ -65,7 +65,6 @@ int checkboard(void) static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel; /* @@ -78,11 +77,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/board/xes/xpedite5370/xpedite5370.c b/board/xes/xpedite5370/xpedite5370.c index 48d9fc8c73..2a060c2462 100644 --- a/board/xes/xpedite5370/xpedite5370.c +++ b/board/xes/xpedite5370/xpedite5370.c @@ -58,7 +58,6 @@ int checkboard(void) static void flash_cs_fixup(void) { - volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); int flash_sel; /* @@ -71,11 +70,11 @@ static void flash_cs_fixup(void) printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); if (flash_sel) { - out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); - out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(0, CONFIG_SYS_BR1_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR1_PRELIM); - out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); - out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(1, CONFIG_SYS_OR0_PRELIM); } } diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 146e9bf3cb..acdb43112a 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -75,7 +75,7 @@ struct fsl_elbc_ctrl { struct fsl_elbc_mtd *chips[MAX_BANKS]; /* device info */ - fsl_lbus_t *regs; + fsl_lbc_t *regs; u8 __iomem *addr; /* Address of assigned FCM buffer */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes; /* Number of bytes read during command */ @@ -171,7 +171,7 @@ static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; int buf_num; ctrl->page = page_addr; @@ -211,7 +211,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd) struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; long long end_tick; u32 ltesr; @@ -261,7 +261,7 @@ static void fsl_elbc_do_read(struct nand_chip *chip, int oob) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; if (priv->page_size) { out_be32(&lbc->fir, @@ -295,7 +295,7 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, struct nand_chip *chip = mtd->priv; struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; ctrl->use_mdr = 0; @@ -633,7 +633,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip) { struct fsl_elbc_mtd *priv = chip->priv; struct fsl_elbc_ctrl *ctrl = priv->ctrl; - fsl_lbus_t *lbc = ctrl->regs; + fsl_lbc_t *lbc = ctrl->regs; if (ctrl->status != LTESR_CC) return NAND_STATUS_FAIL; @@ -697,11 +697,7 @@ static void fsl_elbc_ctrl_init(void) if (!elbc_ctrl) return; -#ifdef CONFIG_MPC85xx - elbc_ctrl->regs = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR; -#else - elbc_ctrl->regs = &((immap_t *)CONFIG_SYS_IMMR)->lbus; -#endif + elbc_ctrl->regs = LBC_BASE_ADDR; /* clear event registers */ out_be32(&elbc_ctrl->regs->ltesr, LTESR_NAND_MASK); diff --git a/include/mpc85xx.h b/include/mpc85xx.h index a4d4d65526..2495b99c31 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -6,8 +6,6 @@ #ifndef __MPC85xx_H__ #define __MPC85xx_H__ -#include - /* define for common ppc_asm.tmpl */ #define EXC_OFF_SYS_RESET 0x100 /* System reset */ #define _START_OFFSET 0 diff --git a/nand_spl/board/freescale/mpc8536ds/nand_boot.c b/nand_spl/board/freescale/mpc8536ds/nand_boot.c index af29dc278f..5a0a0c7996 100644 --- a/nand_spl/board/freescale/mpc8536ds/nand_boot.c +++ b/nand_spl/board/freescale/mpc8536ds/nand_boot.c @@ -34,12 +34,11 @@ void board_init_f(ulong bootflag) int px_spd; u32 plat_ratio, bus_clk, sys_clk; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - ccsr_lbc_t *lbc = (void *)CONFIG_SYS_MPC85xx_LBC_ADDR; #if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) /* for FPGA */ - out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM); - out_be32(&lbc->or3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); #else #error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined #endif diff --git a/nand_spl/nand_boot_fsl_elbc.c b/nand_spl/nand_boot_fsl_elbc.c index ff47d55311..9547d44238 100644 --- a/nand_spl/nand_boot_fsl_elbc.c +++ b/nand_spl/nand_boot_fsl_elbc.c @@ -32,7 +32,7 @@ static void nand_wait(void) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR; for (;;) { uint32_t status = in_be32(®s->ltesr); @@ -49,7 +49,7 @@ static void nand_wait(void) static void nand_load(unsigned int offs, int uboot_size, uchar *dst) { - fsl_lbus_t *regs = (fsl_lbus_t *)(CONFIG_SYS_IMMR + 0x5000); + fsl_lbc_t *regs = LBC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; int large = in_be32(®s->bank[0].or) & OR_FCM_PGS; int block_shift = large ? 17 : 14; -- 2.39.5