]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/arm/boot/dts/r8a7790-lager.dts
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty...
[karo-tx-linux.git] / arch / arm / boot / dts / r8a7790-lager.dts
1 /*
2  * Device Tree Source for the Lager board
3  *
4  * Copyright (C) 2013-2014 Renesas Solutions Corp.
5  * Copyright (C) 2014 Cogent Embedded, Inc.
6  *
7  * This file is licensed under the terms of the GNU General Public License
8  * version 2.  This program is licensed "as is" without any warranty of any
9  * kind, whether express or implied.
10  */
11
12 /*
13  * SSI-AK4643
14  *
15  * SW1: 1: AK4643
16  *      2: CN22
17  *      3: ADV7511
18  *
19  * This command is required when Playback/Capture
20  *
21  *      amixer set "LINEOUT Mixer DACL" on
22  *      amixer set "DVC Out" 100%
23  *      amixer set "DVC In" 100%
24  *
25  * You can use Mute
26  *
27  *      amixer set "DVC Out Mute" on
28  *      amixer set "DVC In Mute" on
29  *
30  * You can use Volume Ramp
31  *
32  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
33  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
34  *      amixer set "DVC Out Ramp" on
35  *      aplay xxx.wav &
36  *      amixer set "DVC Out"  80%  // Volume Down
37  *      amixer set "DVC Out" 100%  // Volume Up
38  */
39
40 /dts-v1/;
41 #include "r8a7790.dtsi"
42 #include <dt-bindings/gpio/gpio.h>
43 #include <dt-bindings/input/input.h>
44
45 / {
46         model = "Lager";
47         compatible = "renesas,lager", "renesas,r8a7790";
48
49         aliases {
50                 serial0 = &scifa0;
51                 serial1 = &scifa1;
52         };
53
54         chosen {
55                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
56                 stdout-path = &scifa0;
57         };
58
59         memory@40000000 {
60                 device_type = "memory";
61                 reg = <0 0x40000000 0 0x40000000>;
62         };
63
64         memory@140000000 {
65                 device_type = "memory";
66                 reg = <1 0x40000000 0 0xc0000000>;
67         };
68
69         lbsc {
70                 #address-cells = <1>;
71                 #size-cells = <1>;
72         };
73
74         keyboard {
75                 compatible = "gpio-keys";
76
77                 button@1 {
78                         linux,code = <KEY_1>;
79                         label = "SW2-1";
80                         gpio-key,wakeup;
81                         debounce-interval = <20>;
82                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
83                 };
84                 button@2 {
85                         linux,code = <KEY_2>;
86                         label = "SW2-2";
87                         gpio-key,wakeup;
88                         debounce-interval = <20>;
89                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
90                 };
91                 button@3 {
92                         linux,code = <KEY_3>;
93                         label = "SW2-3";
94                         gpio-key,wakeup;
95                         debounce-interval = <20>;
96                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
97                 };
98                 button@4 {
99                         linux,code = <KEY_4>;
100                         label = "SW2-4";
101                         gpio-key,wakeup;
102                         debounce-interval = <20>;
103                         gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
104                 };
105         };
106
107         leds {
108                 compatible = "gpio-leds";
109                 led6 {
110                         gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
111                 };
112                 led7 {
113                         gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
114                 };
115                 led8 {
116                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
117                 };
118         };
119
120         fixedregulator3v3: fixedregulator@0 {
121                 compatible = "regulator-fixed";
122                 regulator-name = "fixed-3.3V";
123                 regulator-min-microvolt = <3300000>;
124                 regulator-max-microvolt = <3300000>;
125                 regulator-boot-on;
126                 regulator-always-on;
127         };
128
129         vcc_sdhi0: regulator@1 {
130                 compatible = "regulator-fixed";
131
132                 regulator-name = "SDHI0 Vcc";
133                 regulator-min-microvolt = <3300000>;
134                 regulator-max-microvolt = <3300000>;
135
136                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
137                 enable-active-high;
138         };
139
140         vccq_sdhi0: regulator@2 {
141                 compatible = "regulator-gpio";
142
143                 regulator-name = "SDHI0 VccQ";
144                 regulator-min-microvolt = <1800000>;
145                 regulator-max-microvolt = <3300000>;
146
147                 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
148                 gpios-states = <1>;
149                 states = <3300000 1
150                           1800000 0>;
151         };
152
153         vcc_sdhi2: regulator@3 {
154                 compatible = "regulator-fixed";
155
156                 regulator-name = "SDHI2 Vcc";
157                 regulator-min-microvolt = <3300000>;
158                 regulator-max-microvolt = <3300000>;
159
160                 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
161                 enable-active-high;
162         };
163
164         vccq_sdhi2: regulator@4 {
165                 compatible = "regulator-gpio";
166
167                 regulator-name = "SDHI2 VccQ";
168                 regulator-min-microvolt = <1800000>;
169                 regulator-max-microvolt = <3300000>;
170
171                 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
172                 gpios-states = <1>;
173                 states = <3300000 1
174                           1800000 0>;
175         };
176
177         rsnd_ak4643: sound {
178                 compatible = "simple-audio-card";
179
180                 simple-audio-card,format = "left_j";
181                 simple-audio-card,bitclock-master = <&sndcodec>;
182                 simple-audio-card,frame-master = <&sndcodec>;
183
184                 sndcpu: simple-audio-card,cpu {
185                         sound-dai = <&rcar_sound>;
186                 };
187
188                 sndcodec: simple-audio-card,codec {
189                         sound-dai = <&ak4643>;
190                         system-clock-frequency = <11289600>;
191                 };
192         };
193
194         vga-encoder {
195                 compatible = "adi,adv7123";
196
197                 ports {
198                         #address-cells = <1>;
199                         #size-cells = <0>;
200
201                         port@0 {
202                                 reg = <0>;
203                                 adv7123_in: endpoint {
204                                         remote-endpoint = <&du_out_rgb>;
205                                 };
206                         };
207                         port@1 {
208                                 reg = <1>;
209                                 adv7123_out: endpoint {
210                                         remote-endpoint = <&vga_in>;
211                                 };
212                         };
213                 };
214         };
215
216         vga {
217                 compatible = "vga-connector";
218
219                 port {
220                         vga_in: endpoint {
221                                 remote-endpoint = <&adv7123_out>;
222                         };
223                 };
224         };
225
226         hdmi-out {
227                 compatible = "hdmi-connector";
228                 type = "a";
229
230                 port {
231                         hdmi_con: endpoint {
232                                 remote-endpoint = <&adv7511_out>;
233                         };
234                 };
235         };
236
237         x2_clk: x2-clock {
238                 compatible = "fixed-clock";
239                 #clock-cells = <0>;
240                 clock-frequency = <148500000>;
241         };
242
243         x13_clk: x13-clock {
244                 compatible = "fixed-clock";
245                 #clock-cells = <0>;
246                 clock-frequency = <148500000>;
247         };
248 };
249
250 &du {
251         pinctrl-0 = <&du_pins>;
252         pinctrl-names = "default";
253         status = "okay";
254
255         clocks = <&mstp7_clks R8A7790_CLK_DU0>,
256                  <&mstp7_clks R8A7790_CLK_DU1>,
257                  <&mstp7_clks R8A7790_CLK_DU2>,
258                  <&mstp7_clks R8A7790_CLK_LVDS0>,
259                  <&mstp7_clks R8A7790_CLK_LVDS1>,
260                  <&x13_clk>, <&x2_clk>;
261         clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
262                       "dclkin.0", "dclkin.1";
263
264         ports {
265                 port@0 {
266                         endpoint {
267                                 remote-endpoint = <&adv7123_in>;
268                         };
269                 };
270                 port@1 {
271                         endpoint {
272                                 remote-endpoint = <&adv7511_in>;
273                         };
274                 };
275                 port@2 {
276                         lvds_connector: endpoint {
277                         };
278                 };
279         };
280 };
281
282 &extal_clk {
283         clock-frequency = <20000000>;
284 };
285
286 &pfc {
287         du_pins: du {
288                 renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
289                 renesas,function = "du";
290         };
291
292         scifa0_pins: serial0 {
293                 renesas,groups = "scifa0_data";
294                 renesas,function = "scifa0";
295         };
296
297         ether_pins: ether {
298                 renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
299                 renesas,function = "eth";
300         };
301
302         phy1_pins: phy1 {
303                 renesas,groups = "intc_irq0";
304                 renesas,function = "intc";
305         };
306
307         scifa1_pins: serial1 {
308                 renesas,groups = "scifa1_data";
309                 renesas,function = "scifa1";
310         };
311
312         sdhi0_pins: sd0 {
313                 renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
314                 renesas,function = "sdhi0";
315         };
316
317         sdhi2_pins: sd2 {
318                 renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
319                 renesas,function = "sdhi2";
320         };
321
322         mmc1_pins: mmc1 {
323                 renesas,groups = "mmc1_data8", "mmc1_ctrl";
324                 renesas,function = "mmc1";
325         };
326
327         qspi_pins: spi0 {
328                 renesas,groups = "qspi_ctrl", "qspi_data4";
329                 renesas,function = "qspi";
330         };
331
332         msiof1_pins: spi2 {
333                 renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
334                                  "msiof1_tx";
335                 renesas,function = "msiof1";
336         };
337
338         iic1_pins: iic1 {
339                 renesas,groups = "iic1";
340                 renesas,function = "iic1";
341         };
342
343         iic2_pins: iic2 {
344                 renesas,groups = "iic2";
345                 renesas,function = "iic2";
346         };
347
348         iic3_pins: iic3 {
349                 renesas,groups = "iic3";
350                 renesas,function = "iic3";
351         };
352
353         hsusb_pins: hsusb {
354                 renesas,groups = "usb0_ovc_vbus";
355                 renesas,function = "usb0";
356         };
357
358         usb0_pins: usb0 {
359                 renesas,groups = "usb0";
360                 renesas,function = "usb0";
361         };
362
363         usb1_pins: usb1 {
364                 renesas,groups = "usb1";
365                 renesas,function = "usb1";
366         };
367
368         usb2_pins: usb2 {
369                 renesas,groups = "usb2";
370                 renesas,function = "usb2";
371         };
372
373         vin1_pins: vin {
374                 renesas,groups = "vin1_data8", "vin1_clk";
375                 renesas,function = "vin1";
376         };
377
378         sound_pins: sound {
379                 renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
380                 renesas,function = "ssi";
381         };
382
383         sound_clk_pins: sound_clk {
384                 renesas,groups = "audio_clk_a";
385                 renesas,function = "audio_clk";
386         };
387 };
388
389 &ether {
390         pinctrl-0 = <&ether_pins &phy1_pins>;
391         pinctrl-names = "default";
392
393         phy-handle = <&phy1>;
394         renesas,ether-link-active-low;
395         status = "okay";
396
397         phy1: ethernet-phy@1 {
398                 reg = <1>;
399                 interrupt-parent = <&irqc0>;
400                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
401                 micrel,led-mode = <1>;
402         };
403 };
404
405 &cmt0 {
406         status = "okay";
407 };
408
409 &mmcif1 {
410         pinctrl-0 = <&mmc1_pins>;
411         pinctrl-names = "default";
412
413         vmmc-supply = <&fixedregulator3v3>;
414         bus-width = <8>;
415         non-removable;
416         status = "okay";
417 };
418
419 &sata1 {
420         status = "okay";
421 };
422
423 &qspi {
424         pinctrl-0 = <&qspi_pins>;
425         pinctrl-names = "default";
426
427         status = "okay";
428
429         flash: flash@0 {
430                 #address-cells = <1>;
431                 #size-cells = <1>;
432                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
433                 reg = <0>;
434                 spi-max-frequency = <30000000>;
435                 spi-tx-bus-width = <4>;
436                 spi-rx-bus-width = <4>;
437                 spi-cpha;
438                 spi-cpol;
439                 m25p,fast-read;
440
441                 partition@0 {
442                         label = "loader";
443                         reg = <0x00000000 0x00040000>;
444                         read-only;
445                 };
446                 partition@40000 {
447                         label = "user";
448                         reg = <0x00040000 0x00400000>;
449                         read-only;
450                 };
451                 partition@440000 {
452                         label = "flash";
453                         reg = <0x00440000 0x03bc0000>;
454                 };
455         };
456 };
457
458 &scifa0 {
459         pinctrl-0 = <&scifa0_pins>;
460         pinctrl-names = "default";
461
462         status = "okay";
463 };
464
465 &scifa1 {
466         pinctrl-0 = <&scifa1_pins>;
467         pinctrl-names = "default";
468
469         status = "okay";
470 };
471
472 &msiof1 {
473         pinctrl-0 = <&msiof1_pins>;
474         pinctrl-names = "default";
475
476         status = "okay";
477
478         pmic: pmic@0 {
479                 compatible = "renesas,r2a11302ft";
480                 reg = <0>;
481                 spi-max-frequency = <6000000>;
482                 spi-cpol;
483                 spi-cpha;
484         };
485 };
486
487 &sdhi0 {
488         pinctrl-0 = <&sdhi0_pins>;
489         pinctrl-names = "default";
490
491         vmmc-supply = <&vcc_sdhi0>;
492         vqmmc-supply = <&vccq_sdhi0>;
493         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
494         status = "okay";
495 };
496
497 &sdhi2 {
498         pinctrl-0 = <&sdhi2_pins>;
499         pinctrl-names = "default";
500
501         vmmc-supply = <&vcc_sdhi2>;
502         vqmmc-supply = <&vccq_sdhi2>;
503         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
504         status = "okay";
505 };
506
507 &cpu0 {
508         cpu0-supply = <&vdd_dvfs>;
509 };
510
511 &iic0   {
512         status = "okay";
513 };
514
515 &iic1   {
516         status = "okay";
517         pinctrl-0 = <&iic1_pins>;
518         pinctrl-names = "default";
519 };
520
521 &iic2   {
522         status = "okay";
523         pinctrl-0 = <&iic2_pins>;
524         pinctrl-names = "default";
525
526         clock-frequency = <100000>;
527
528         ak4643: codec@12 {
529                 compatible = "asahi-kasei,ak4643";
530                 #sound-dai-cells = <0>;
531                 reg = <0x12>;
532         };
533
534         composite-in@20 {
535                 compatible = "adi,adv7180";
536                 reg = <0x20>;
537                 remote = <&vin1>;
538
539                 port {
540                         adv7180: endpoint {
541                                 bus-width = <8>;
542                                 remote-endpoint = <&vin1ep0>;
543                         };
544                 };
545         };
546
547         hdmi@39 {
548                 compatible = "adi,adv7511w";
549                 reg = <0x39>;
550                 interrupt-parent = <&gpio1>;
551                 interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
552
553                 adi,input-depth = <8>;
554                 adi,input-colorspace = "rgb";
555                 adi,input-clock = "1x";
556                 adi,input-style = <1>;
557                 adi,input-justification = "evenly";
558
559                 ports {
560                         #address-cells = <1>;
561                         #size-cells = <0>;
562
563                         port@0 {
564                                 reg = <0>;
565                                 adv7511_in: endpoint {
566                                         remote-endpoint = <&du_out_lvds0>;
567                                 };
568                         };
569
570                         port@1 {
571                                 reg = <1>;
572                                 adv7511_out: endpoint {
573                                         remote-endpoint = <&hdmi_con>;
574                                 };
575                         };
576                 };
577         };
578 };
579
580 &iic3 {
581         pinctrl-names = "default";
582         pinctrl-0 = <&iic3_pins>;
583         status = "okay";
584
585         pmic@58 {
586                 compatible = "dlg,da9063";
587                 reg = <0x58>;
588                 interrupt-parent = <&irqc0>;
589                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
590                 interrupt-controller;
591
592                 rtc {
593                         compatible = "dlg,da9063-rtc";
594                 };
595
596                 wdt {
597                         compatible = "dlg,da9063-watchdog";
598                 };
599         };
600
601         vdd_dvfs: regulator@68 {
602                 compatible = "dlg,da9210";
603                 reg = <0x68>;
604                 interrupt-parent = <&irqc0>;
605                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
606
607                 regulator-min-microvolt = <1000000>;
608                 regulator-max-microvolt = <1000000>;
609                 regulator-boot-on;
610                 regulator-always-on;
611         };
612 };
613
614 &pci0 {
615         status = "okay";
616         pinctrl-0 = <&usb0_pins>;
617         pinctrl-names = "default";
618 };
619
620 &pci1 {
621         status = "okay";
622         pinctrl-0 = <&usb1_pins>;
623         pinctrl-names = "default";
624 };
625
626 &xhci {
627         status = "okay";
628         pinctrl-0 = <&usb2_pins>;
629         pinctrl-names = "default";
630 };
631
632 &pci2 {
633         status = "okay";
634         pinctrl-0 = <&usb2_pins>;
635         pinctrl-names = "default";
636 };
637
638 &hsusb {
639         status = "okay";
640         pinctrl-0 = <&hsusb_pins>;
641         pinctrl-names = "default";
642         renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
643 };
644
645 &usbphy {
646         status = "okay";
647 };
648
649 /* composite video input */
650 &vin1 {
651         pinctrl-0 = <&vin1_pins>;
652         pinctrl-names = "default";
653
654         status = "okay";
655
656         port {
657                 #address-cells = <1>;
658                 #size-cells = <0>;
659
660                 vin1ep0: endpoint {
661                         remote-endpoint = <&adv7180>;
662                         bus-width = <8>;
663                 };
664         };
665 };
666
667 &rcar_sound {
668         pinctrl-0 = <&sound_pins &sound_clk_pins>;
669         pinctrl-names = "default";
670
671         /* Single DAI */
672         #sound-dai-cells = <0>;
673
674         status = "okay";
675
676         rcar_sound,dai {
677                 dai0 {
678                         playback = <&ssi0 &src2 &dvc0>;
679                         capture  = <&ssi1 &src3 &dvc1>;
680                 };
681         };
682 };
683
684 &ssi1 {
685         shared-pin;
686 };