]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/arm/boot/dts/r8a7791-koelsch.dts
Merge branch 'cpuidle' into release
[karo-tx-linux.git] / arch / arm / boot / dts / r8a7791-koelsch.dts
1 /*
2  * Device Tree Source for the Koelsch board
3  *
4  * Copyright (C) 2013 Renesas Electronics Corporation
5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
6  * Copyright (C) 2014 Cogent Embedded, Inc.
7  *
8  * This file is licensed under the terms of the GNU General Public License
9  * version 2.  This program is licensed "as is" without any warranty of any
10  * kind, whether express or implied.
11  */
12
13 /*
14  * SSI-AK4643
15  *
16  * SW1: 1: AK4643
17  *      2: CN22
18  *      3: ADV7511
19  *
20  * This command is required when Playback/Capture
21  *
22  *      amixer set "LINEOUT Mixer DACL" on
23  *      amixer set "DVC Out" 100%
24  *      amixer set "DVC In" 100%
25  *
26  * You can use Mute
27  *
28  *      amixer set "DVC Out Mute" on
29  *      amixer set "DVC In Mute" on
30  *
31  * You can use Volume Ramp
32  *
33  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
34  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
35  *      amixer set "DVC Out Ramp" on
36  *      aplay xxx.wav &
37  *      amixer set "DVC Out"  80%  // Volume Down
38  *      amixer set "DVC Out" 100%  // Volume Up
39  */
40
41 /dts-v1/;
42 #include "r8a7791.dtsi"
43 #include <dt-bindings/gpio/gpio.h>
44 #include <dt-bindings/input/input.h>
45
46 / {
47         model = "Koelsch";
48         compatible = "renesas,koelsch", "renesas,r8a7791";
49
50         aliases {
51                 serial0 = &scif0;
52                 serial1 = &scif1;
53         };
54
55         chosen {
56                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
57                 stdout-path = &scif0;
58         };
59
60         memory@40000000 {
61                 device_type = "memory";
62                 reg = <0 0x40000000 0 0x40000000>;
63         };
64
65         memory@200000000 {
66                 device_type = "memory";
67                 reg = <2 0x00000000 0 0x40000000>;
68         };
69
70         lbsc {
71                 #address-cells = <1>;
72                 #size-cells = <1>;
73         };
74
75         keyboard {
76                 compatible = "gpio-keys";
77
78                 key-1 {
79                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
80                         linux,code = <KEY_1>;
81                         label = "SW2-1";
82                         gpio-key,wakeup;
83                         debounce-interval = <20>;
84                 };
85                 key-2 {
86                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
87                         linux,code = <KEY_2>;
88                         label = "SW2-2";
89                         gpio-key,wakeup;
90                         debounce-interval = <20>;
91                 };
92                 key-3 {
93                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
94                         linux,code = <KEY_3>;
95                         label = "SW2-3";
96                         gpio-key,wakeup;
97                         debounce-interval = <20>;
98                 };
99                 key-4 {
100                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
101                         linux,code = <KEY_4>;
102                         label = "SW2-4";
103                         gpio-key,wakeup;
104                         debounce-interval = <20>;
105                 };
106                 key-a {
107                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
108                         linux,code = <KEY_A>;
109                         label = "SW30";
110                         gpio-key,wakeup;
111                         debounce-interval = <20>;
112                 };
113                 key-b {
114                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
115                         linux,code = <KEY_B>;
116                         label = "SW31";
117                         gpio-key,wakeup;
118                         debounce-interval = <20>;
119                 };
120                 key-c {
121                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
122                         linux,code = <KEY_C>;
123                         label = "SW32";
124                         gpio-key,wakeup;
125                         debounce-interval = <20>;
126                 };
127                 key-d {
128                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
129                         linux,code = <KEY_D>;
130                         label = "SW33";
131                         gpio-key,wakeup;
132                         debounce-interval = <20>;
133                 };
134                 key-e {
135                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
136                         linux,code = <KEY_E>;
137                         label = "SW34";
138                         gpio-key,wakeup;
139                         debounce-interval = <20>;
140                 };
141                 key-f {
142                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
143                         linux,code = <KEY_F>;
144                         label = "SW35";
145                         gpio-key,wakeup;
146                         debounce-interval = <20>;
147                 };
148                 key-g {
149                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
150                         linux,code = <KEY_G>;
151                         label = "SW36";
152                         gpio-key,wakeup;
153                         debounce-interval = <20>;
154                 };
155         };
156
157         leds {
158                 compatible = "gpio-leds";
159                 led6 {
160                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
161                         label = "LED6";
162                 };
163                 led7 {
164                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
165                         label = "LED7";
166                 };
167                 led8 {
168                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
169                         label = "LED8";
170                 };
171         };
172
173         vcc_sdhi0: regulator@0 {
174                 compatible = "regulator-fixed";
175
176                 regulator-name = "SDHI0 Vcc";
177                 regulator-min-microvolt = <3300000>;
178                 regulator-max-microvolt = <3300000>;
179
180                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
181                 enable-active-high;
182         };
183
184         vccq_sdhi0: regulator@1 {
185                 compatible = "regulator-gpio";
186
187                 regulator-name = "SDHI0 VccQ";
188                 regulator-min-microvolt = <1800000>;
189                 regulator-max-microvolt = <3300000>;
190
191                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
192                 gpios-states = <1>;
193                 states = <3300000 1
194                           1800000 0>;
195         };
196
197         vcc_sdhi1: regulator@2 {
198                 compatible = "regulator-fixed";
199
200                 regulator-name = "SDHI1 Vcc";
201                 regulator-min-microvolt = <3300000>;
202                 regulator-max-microvolt = <3300000>;
203
204                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
205                 enable-active-high;
206         };
207
208         vccq_sdhi1: regulator@3 {
209                 compatible = "regulator-gpio";
210
211                 regulator-name = "SDHI1 VccQ";
212                 regulator-min-microvolt = <1800000>;
213                 regulator-max-microvolt = <3300000>;
214
215                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
216                 gpios-states = <1>;
217                 states = <3300000 1
218                           1800000 0>;
219         };
220
221         vcc_sdhi2: regulator@4 {
222                 compatible = "regulator-fixed";
223
224                 regulator-name = "SDHI2 Vcc";
225                 regulator-min-microvolt = <3300000>;
226                 regulator-max-microvolt = <3300000>;
227
228                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
229                 enable-active-high;
230         };
231
232         vccq_sdhi2: regulator@5 {
233                 compatible = "regulator-gpio";
234
235                 regulator-name = "SDHI2 VccQ";
236                 regulator-min-microvolt = <1800000>;
237                 regulator-max-microvolt = <3300000>;
238
239                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
240                 gpios-states = <1>;
241                 states = <3300000 1
242                           1800000 0>;
243         };
244
245         rsnd_ak4643: sound {
246                 compatible = "simple-audio-card";
247
248                 simple-audio-card,format = "left_j";
249                 simple-audio-card,bitclock-master = <&sndcodec>;
250                 simple-audio-card,frame-master = <&sndcodec>;
251
252                 sndcpu: simple-audio-card,cpu {
253                         sound-dai = <&rcar_sound>;
254                 };
255
256                 sndcodec: simple-audio-card,codec {
257                         sound-dai = <&ak4643>;
258                         system-clock-frequency = <11289600>;
259                 };
260         };
261
262         hdmi-out {
263                 compatible = "hdmi-connector";
264                 type = "a";
265
266                 port {
267                         hdmi_con: endpoint {
268                                 remote-endpoint = <&adv7511_out>;
269                         };
270                 };
271         };
272
273         x2_clk: x2-clock {
274                 compatible = "fixed-clock";
275                 #clock-cells = <0>;
276                 clock-frequency = <148500000>;
277         };
278
279         x13_clk: x13-clock {
280                 compatible = "fixed-clock";
281                 #clock-cells = <0>;
282                 clock-frequency = <148500000>;
283         };
284 };
285
286 &du {
287         pinctrl-0 = <&du_pins>;
288         pinctrl-names = "default";
289         status = "okay";
290
291         clocks = <&mstp7_clks R8A7791_CLK_DU0>,
292                  <&mstp7_clks R8A7791_CLK_DU1>,
293                  <&mstp7_clks R8A7791_CLK_LVDS0>,
294                  <&x13_clk>, <&x2_clk>;
295         clock-names = "du.0", "du.1", "lvds.0",
296                       "dclkin.0", "dclkin.1";
297
298         ports {
299                 port@0 {
300                         endpoint {
301                                 remote-endpoint = <&adv7511_in>;
302                         };
303                 };
304                 port@1 {
305                         lvds_connector: endpoint {
306                         };
307                 };
308         };
309 };
310
311 &extal_clk {
312         clock-frequency = <20000000>;
313 };
314
315 &pfc {
316         i2c2_pins: i2c2 {
317                 renesas,groups = "i2c2";
318                 renesas,function = "i2c2";
319         };
320
321         du_pins: du {
322                 renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
323                 renesas,function = "du";
324         };
325
326         scif0_pins: serial0 {
327                 renesas,groups = "scif0_data_d";
328                 renesas,function = "scif0";
329         };
330
331         scif1_pins: serial1 {
332                 renesas,groups = "scif1_data_d";
333                 renesas,function = "scif1";
334         };
335
336         ether_pins: ether {
337                 renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
338                 renesas,function = "eth";
339         };
340
341         phy1_pins: phy1 {
342                 renesas,groups = "intc_irq0";
343                 renesas,function = "intc";
344         };
345
346         sdhi0_pins: sd0 {
347                 renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
348                 renesas,function = "sdhi0";
349         };
350
351         sdhi1_pins: sd1 {
352                 renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
353                 renesas,function = "sdhi1";
354         };
355
356         sdhi2_pins: sd2 {
357                 renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
358                 renesas,function = "sdhi2";
359         };
360
361         qspi_pins: spi0 {
362                 renesas,groups = "qspi_ctrl", "qspi_data4";
363                 renesas,function = "qspi";
364         };
365
366         msiof0_pins: spi1 {
367                 renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
368                                  "msiof0_tx";
369                 renesas,function = "msiof0";
370         };
371
372         usb0_pins: usb0 {
373                 renesas,groups = "usb0";
374                 renesas,function = "usb0";
375         };
376
377         usb1_pins: usb1 {
378                 renesas,groups = "usb1";
379                 renesas,function = "usb1";
380         };
381
382         vin1_pins: vin1 {
383                 renesas,groups = "vin1_data8", "vin1_clk";
384                 renesas,function = "vin1";
385         };
386
387         sound_pins: sound {
388                 renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
389                 renesas,function = "ssi";
390         };
391
392         sound_clk_pins: sound_clk {
393                 renesas,groups = "audio_clk_a";
394                 renesas,function = "audio_clk";
395         };
396 };
397
398 &ether {
399         pinctrl-0 = <&ether_pins &phy1_pins>;
400         pinctrl-names = "default";
401
402         phy-handle = <&phy1>;
403         renesas,ether-link-active-low;
404         status = "okay";
405
406         phy1: ethernet-phy@1 {
407                 reg = <1>;
408                 interrupt-parent = <&irqc0>;
409                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
410                 micrel,led-mode = <1>;
411         };
412 };
413
414 &cmt0 {
415         status = "okay";
416 };
417
418 &sata0 {
419         status = "okay";
420 };
421
422 &scif0 {
423         pinctrl-0 = <&scif0_pins>;
424         pinctrl-names = "default";
425
426         status = "okay";
427 };
428
429 &scif1 {
430         pinctrl-0 = <&scif1_pins>;
431         pinctrl-names = "default";
432
433         status = "okay";
434 };
435
436 &sdhi0 {
437         pinctrl-0 = <&sdhi0_pins>;
438         pinctrl-names = "default";
439
440         vmmc-supply = <&vcc_sdhi0>;
441         vqmmc-supply = <&vccq_sdhi0>;
442         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
443         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
444         status = "okay";
445 };
446
447 &sdhi1 {
448         pinctrl-0 = <&sdhi1_pins>;
449         pinctrl-names = "default";
450
451         vmmc-supply = <&vcc_sdhi1>;
452         vqmmc-supply = <&vccq_sdhi1>;
453         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
454         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
455         status = "okay";
456 };
457
458 &sdhi2 {
459         pinctrl-0 = <&sdhi2_pins>;
460         pinctrl-names = "default";
461
462         vmmc-supply = <&vcc_sdhi2>;
463         vqmmc-supply = <&vccq_sdhi2>;
464         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
465         status = "okay";
466 };
467
468 &qspi {
469         pinctrl-0 = <&qspi_pins>;
470         pinctrl-names = "default";
471
472         status = "okay";
473
474         flash: flash@0 {
475                 #address-cells = <1>;
476                 #size-cells = <1>;
477                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
478                 reg = <0>;
479                 spi-max-frequency = <30000000>;
480                 spi-tx-bus-width = <4>;
481                 spi-rx-bus-width = <4>;
482                 spi-cpha;
483                 spi-cpol;
484                 m25p,fast-read;
485
486                 partition@0 {
487                         label = "loader";
488                         reg = <0x00000000 0x00080000>;
489                         read-only;
490                 };
491                 partition@80000 {
492                         label = "user";
493                         reg = <0x00080000 0x00580000>;
494                         read-only;
495                 };
496                 partition@600000 {
497                         label = "flash";
498                         reg = <0x00600000 0x03a00000>;
499                 };
500         };
501 };
502
503 &msiof0 {
504         pinctrl-0 = <&msiof0_pins>;
505         pinctrl-names = "default";
506
507         status = "okay";
508
509         pmic: pmic@0 {
510                 compatible = "renesas,r2a11302ft";
511                 reg = <0>;
512                 spi-max-frequency = <6000000>;
513                 spi-cpol;
514                 spi-cpha;
515         };
516 };
517
518 &i2c2 {
519         pinctrl-0 = <&i2c2_pins>;
520         pinctrl-names = "default";
521
522         status = "okay";
523         clock-frequency = <100000>;
524
525         ak4643: codec@12 {
526                 compatible = "asahi-kasei,ak4643";
527                 #sound-dai-cells = <0>;
528                 reg = <0x12>;
529         };
530
531         composite-in@20 {
532                 compatible = "adi,adv7180";
533                 reg = <0x20>;
534                 remote = <&vin1>;
535
536                 port {
537                         adv7180: endpoint {
538                                 bus-width = <8>;
539                                 remote-endpoint = <&vin1ep>;
540                         };
541                 };
542         };
543
544         hdmi@39 {
545                 compatible = "adi,adv7511w";
546                 reg = <0x39>;
547                 interrupt-parent = <&gpio3>;
548                 interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
549
550                 adi,input-depth = <8>;
551                 adi,input-colorspace = "rgb";
552                 adi,input-clock = "1x";
553                 adi,input-style = <1>;
554                 adi,input-justification = "evenly";
555
556                 ports {
557                         #address-cells = <1>;
558                         #size-cells = <0>;
559
560                         port@0 {
561                                 reg = <0>;
562                                 adv7511_in: endpoint {
563                                         remote-endpoint = <&du_out_rgb>;
564                                 };
565                         };
566
567                         port@1 {
568                                 reg = <1>;
569                                 adv7511_out: endpoint {
570                                         remote-endpoint = <&hdmi_con>;
571                                 };
572                         };
573                 };
574         };
575
576         eeprom@50 {
577                 compatible = "renesas,24c02";
578                 reg = <0x50>;
579                 pagesize = <16>;
580         };
581 };
582
583 &i2c6 {
584         status = "okay";
585         clock-frequency = <100000>;
586
587         pmic@58 {
588                 compatible = "dlg,da9063";
589                 reg = <0x58>;
590                 interrupt-parent = <&irqc0>;
591                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
592                 interrupt-controller;
593
594                 rtc {
595                         compatible = "dlg,da9063-rtc";
596                 };
597
598                 wdt {
599                         compatible = "dlg,da9063-watchdog";
600                 };
601         };
602
603         vdd_dvfs: regulator@68 {
604                 compatible = "dlg,da9210";
605                 reg = <0x68>;
606                 interrupt-parent = <&irqc0>;
607                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
608
609                 regulator-min-microvolt = <1000000>;
610                 regulator-max-microvolt = <1000000>;
611                 regulator-boot-on;
612                 regulator-always-on;
613         };
614 };
615
616 &pci0 {
617         status = "okay";
618         pinctrl-0 = <&usb0_pins>;
619         pinctrl-names = "default";
620 };
621
622 &pci1 {
623         status = "okay";
624         pinctrl-0 = <&usb1_pins>;
625         pinctrl-names = "default";
626 };
627
628 &hsusb {
629         status = "okay";
630         pinctrl-0 = <&usb0_pins>;
631         pinctrl-names = "default";
632         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
633 };
634
635 &usbphy {
636         status = "okay";
637 };
638
639 &pcie_bus_clk {
640         status = "okay";
641 };
642
643 &pciec {
644         status = "okay";
645 };
646
647 &cpu0 {
648         cpu0-supply = <&vdd_dvfs>;
649 };
650
651 /* composite video input */
652 &vin1 {
653         status = "okay";
654         pinctrl-0 = <&vin1_pins>;
655         pinctrl-names = "default";
656
657         port {
658                 #address-cells = <1>;
659                 #size-cells = <0>;
660
661                 vin1ep: endpoint {
662                         remote-endpoint = <&adv7180>;
663                         bus-width = <8>;
664                 };
665         };
666 };
667
668 &rcar_sound {
669         pinctrl-0 = <&sound_pins &sound_clk_pins>;
670         pinctrl-names = "default";
671
672         /* Single DAI */
673         #sound-dai-cells = <0>;
674
675         status = "okay";
676
677         rcar_sound,dai {
678                 dai0 {
679                         playback = <&ssi0 &src2 &dvc0>;
680                         capture  = <&ssi1 &src3 &dvc1>;
681                 };
682         };
683 };
684
685 &ssi1 {
686         shared-pin;
687 };