]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - arch/arm/boot/dts/sun6i-a31.dtsi
Merge branch 'cpuidle' into release
[karo-tx-linux.git] / arch / arm / boot / dts / sun6i-a31.dtsi
1 /*
2  * Copyright 2013 Maxime Ripard
3  *
4  * Maxime Ripard <maxime.ripard@free-electrons.com>
5  *
6  * This file is dual-licensed: you can use it either under the terms
7  * of the GPL or the X11 license, at your option. Note that this dual
8  * licensing only applies to this file, and not this project as a
9  * whole.
10  *
11  *  a) This file is free software; you can redistribute it and/or
12  *     modify it under the terms of the GNU General Public License as
13  *     published by the Free Software Foundation; either version 2 of the
14  *     License, or (at your option) any later version.
15  *
16  *     This file is distributed in the hope that it will be useful,
17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  *     GNU General Public License for more details.
20  *
21  * Or, alternatively,
22  *
23  *  b) Permission is hereby granted, free of charge, to any person
24  *     obtaining a copy of this software and associated documentation
25  *     files (the "Software"), to deal in the Software without
26  *     restriction, including without limitation the rights to use,
27  *     copy, modify, merge, publish, distribute, sublicense, and/or
28  *     sell copies of the Software, and to permit persons to whom the
29  *     Software is furnished to do so, subject to the following
30  *     conditions:
31  *
32  *     The above copyright notice and this permission notice shall be
33  *     included in all copies or substantial portions of the Software.
34  *
35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42  *     OTHER DEALINGS IN THE SOFTWARE.
43  */
44
45 #include "skeleton.dtsi"
46
47 #include <dt-bindings/interrupt-controller/arm-gic.h>
48 #include <dt-bindings/thermal/thermal.h>
49
50 #include <dt-bindings/pinctrl/sun4i-a10.h>
51
52 / {
53         interrupt-parent = <&gic>;
54
55         aliases {
56                 ethernet0 = &gmac;
57         };
58
59         chosen {
60                 #address-cells = <1>;
61                 #size-cells = <1>;
62                 ranges;
63
64                 framebuffer@0 {
65                         compatible = "allwinner,simple-framebuffer",
66                                      "simple-framebuffer";
67                         allwinner,pipeline = "de_be0-lcd0-hdmi";
68                         clocks = <&pll6 0>;
69                         status = "disabled";
70                 };
71
72                 framebuffer@1 {
73                         compatible = "allwinner,simple-framebuffer",
74                                      "simple-framebuffer";
75                         allwinner,pipeline = "de_be0-lcd0";
76                         clocks = <&pll6 0>;
77                         status = "disabled";
78                 };
79         };
80
81         timer {
82                 compatible = "arm,armv7-timer";
83                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
84                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
85                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
86                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
87                 clock-frequency = <24000000>;
88                 arm,cpu-registers-not-fw-configured;
89         };
90
91         cpus {
92                 enable-method = "allwinner,sun6i-a31";
93                 #address-cells = <1>;
94                 #size-cells = <0>;
95
96                 cpu0: cpu@0 {
97                         compatible = "arm,cortex-a7";
98                         device_type = "cpu";
99                         reg = <0>;
100                         clocks = <&cpu>;
101                         clock-latency = <244144>; /* 8 32k periods */
102                         operating-points = <
103                                 /* kHz    uV */
104                                 1008000 1200000
105                                 864000  1200000
106                                 720000  1100000
107                                 480000  1000000
108                                 >;
109                         #cooling-cells = <2>;
110                         cooling-min-level = <0>;
111                         cooling-max-level = <3>;
112                 };
113
114                 cpu@1 {
115                         compatible = "arm,cortex-a7";
116                         device_type = "cpu";
117                         reg = <1>;
118                 };
119
120                 cpu@2 {
121                         compatible = "arm,cortex-a7";
122                         device_type = "cpu";
123                         reg = <2>;
124                 };
125
126                 cpu@3 {
127                         compatible = "arm,cortex-a7";
128                         device_type = "cpu";
129                         reg = <3>;
130                 };
131         };
132
133         thermal-zones {
134                 cpu_thermal {
135                         /* milliseconds */
136                         polling-delay-passive = <250>;
137                         polling-delay = <1000>;
138                         thermal-sensors = <&rtp>;
139
140                         cooling-maps {
141                                 map0 {
142                                         trip = <&cpu_alert0>;
143                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
144                                 };
145                         };
146
147                         trips {
148                                 cpu_alert0: cpu_alert0 {
149                                         /* milliCelsius */
150                                         temperature = <70000>;
151                                         hysteresis = <2000>;
152                                         type = "passive";
153                                 };
154
155                                 cpu_crit: cpu_crit {
156                                         /* milliCelsius */
157                                         temperature = <100000>;
158                                         hysteresis = <2000>;
159                                         type = "critical";
160                                 };
161                         };
162                 };
163         };
164
165         memory {
166                 reg = <0x40000000 0x80000000>;
167         };
168
169         pmu {
170                 compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
171                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
172                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
173                              <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
174                              <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
175         };
176
177         clocks {
178                 #address-cells = <1>;
179                 #size-cells = <1>;
180                 ranges;
181
182                 osc24M: osc24M {
183                         #clock-cells = <0>;
184                         compatible = "fixed-clock";
185                         clock-frequency = <24000000>;
186                 };
187
188                 osc32k: clk@0 {
189                         #clock-cells = <0>;
190                         compatible = "fixed-clock";
191                         clock-frequency = <32768>;
192                         clock-output-names = "osc32k";
193                 };
194
195                 pll1: clk@01c20000 {
196                         #clock-cells = <0>;
197                         compatible = "allwinner,sun6i-a31-pll1-clk";
198                         reg = <0x01c20000 0x4>;
199                         clocks = <&osc24M>;
200                         clock-output-names = "pll1";
201                 };
202
203                 pll6: clk@01c20028 {
204                         #clock-cells = <1>;
205                         compatible = "allwinner,sun6i-a31-pll6-clk";
206                         reg = <0x01c20028 0x4>;
207                         clocks = <&osc24M>;
208                         clock-output-names = "pll6", "pll6x2";
209                 };
210
211                 cpu: cpu@01c20050 {
212                         #clock-cells = <0>;
213                         compatible = "allwinner,sun4i-a10-cpu-clk";
214                         reg = <0x01c20050 0x4>;
215
216                         /*
217                          * PLL1 is listed twice here.
218                          * While it looks suspicious, it's actually documented
219                          * that way both in the datasheet and in the code from
220                          * Allwinner.
221                          */
222                         clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
223                         clock-output-names = "cpu";
224                 };
225
226                 axi: axi@01c20050 {
227                         #clock-cells = <0>;
228                         compatible = "allwinner,sun4i-a10-axi-clk";
229                         reg = <0x01c20050 0x4>;
230                         clocks = <&cpu>;
231                         clock-output-names = "axi";
232                 };
233
234                 ahb1: ahb1@01c20054 {
235                         #clock-cells = <0>;
236                         compatible = "allwinner,sun6i-a31-ahb1-clk";
237                         reg = <0x01c20054 0x4>;
238                         clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
239                         clock-output-names = "ahb1";
240
241                         /*
242                          * Clock AHB1 from PLL6, instead of CPU/AXI which
243                          * has rate changes due to cpufreq. Also the DMA
244                          * controller requires AHB1 clocked from PLL6.
245                          */
246                         assigned-clocks = <&ahb1>;
247                         assigned-clock-parents = <&pll6 0>;
248                 };
249
250                 ahb1_gates: clk@01c20060 {
251                         #clock-cells = <1>;
252                         compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
253                         reg = <0x01c20060 0x8>;
254                         clocks = <&ahb1>;
255                         clock-indices = <1>, <5>,
256                                         <6>, <8>, <9>,
257                                         <10>, <11>, <12>,
258                                         <13>, <14>,
259                                         <17>, <18>, <19>,
260                                         <20>, <21>, <22>,
261                                         <23>, <24>, <26>,
262                                         <27>, <29>,
263                                         <30>, <31>, <32>,
264                                         <36>, <37>, <40>,
265                                         <43>, <44>, <45>,
266                                         <46>, <47>, <50>,
267                                         <52>, <55>, <56>,
268                                         <57>, <58>;
269                         clock-output-names = "ahb1_mipidsi", "ahb1_ss",
270                                         "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
271                                         "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
272                                         "ahb1_nand0", "ahb1_sdram",
273                                         "ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
274                                         "ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
275                                         "ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
276                                         "ahb1_ehci1", "ahb1_ohci0",
277                                         "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
278                                         "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
279                                         "ahb1_hdmi", "ahb1_de0", "ahb1_de1",
280                                         "ahb1_fe0", "ahb1_fe1", "ahb1_mp",
281                                         "ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
282                                         "ahb1_drc0", "ahb1_drc1";
283                 };
284
285                 apb1: apb1@01c20054 {
286                         #clock-cells = <0>;
287                         compatible = "allwinner,sun4i-a10-apb0-clk";
288                         reg = <0x01c20054 0x4>;
289                         clocks = <&ahb1>;
290                         clock-output-names = "apb1";
291                 };
292
293                 apb1_gates: clk@01c20068 {
294                         #clock-cells = <1>;
295                         compatible = "allwinner,sun6i-a31-apb1-gates-clk";
296                         reg = <0x01c20068 0x4>;
297                         clocks = <&apb1>;
298                         clock-indices = <0>, <4>,
299                                         <5>, <12>,
300                                         <13>;
301                         clock-output-names = "apb1_codec", "apb1_digital_mic",
302                                         "apb1_pio", "apb1_daudio0",
303                                         "apb1_daudio1";
304                 };
305
306                 apb2: clk@01c20058 {
307                         #clock-cells = <0>;
308                         compatible = "allwinner,sun4i-a10-apb1-clk";
309                         reg = <0x01c20058 0x4>;
310                         clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
311                         clock-output-names = "apb2";
312                 };
313
314                 apb2_gates: clk@01c2006c {
315                         #clock-cells = <1>;
316                         compatible = "allwinner,sun6i-a31-apb2-gates-clk";
317                         reg = <0x01c2006c 0x4>;
318                         clocks = <&apb2>;
319                         clock-indices = <0>, <1>,
320                                         <2>, <3>, <16>,
321                                         <17>, <18>, <19>,
322                                         <20>, <21>;
323                         clock-output-names = "apb2_i2c0", "apb2_i2c1",
324                                              "apb2_i2c2", "apb2_i2c3",
325                                              "apb2_uart0", "apb2_uart1",
326                                              "apb2_uart2", "apb2_uart3",
327                                              "apb2_uart4", "apb2_uart5";
328                 };
329
330                 mmc0_clk: clk@01c20088 {
331                         #clock-cells = <1>;
332                         compatible = "allwinner,sun4i-a10-mmc-clk";
333                         reg = <0x01c20088 0x4>;
334                         clocks = <&osc24M>, <&pll6 0>;
335                         clock-output-names = "mmc0",
336                                              "mmc0_output",
337                                              "mmc0_sample";
338                 };
339
340                 mmc1_clk: clk@01c2008c {
341                         #clock-cells = <1>;
342                         compatible = "allwinner,sun4i-a10-mmc-clk";
343                         reg = <0x01c2008c 0x4>;
344                         clocks = <&osc24M>, <&pll6 0>;
345                         clock-output-names = "mmc1",
346                                              "mmc1_output",
347                                              "mmc1_sample";
348                 };
349
350                 mmc2_clk: clk@01c20090 {
351                         #clock-cells = <1>;
352                         compatible = "allwinner,sun4i-a10-mmc-clk";
353                         reg = <0x01c20090 0x4>;
354                         clocks = <&osc24M>, <&pll6 0>;
355                         clock-output-names = "mmc2",
356                                              "mmc2_output",
357                                              "mmc2_sample";
358                 };
359
360                 mmc3_clk: clk@01c20094 {
361                         #clock-cells = <1>;
362                         compatible = "allwinner,sun4i-a10-mmc-clk";
363                         reg = <0x01c20094 0x4>;
364                         clocks = <&osc24M>, <&pll6 0>;
365                         clock-output-names = "mmc3",
366                                              "mmc3_output",
367                                              "mmc3_sample";
368                 };
369
370                 ss_clk: clk@01c2009c {
371                         #clock-cells = <0>;
372                         compatible = "allwinner,sun4i-a10-mod0-clk";
373                         reg = <0x01c2009c 0x4>;
374                         clocks = <&osc24M>, <&pll6 0>;
375                         clock-output-names = "ss";
376                 };
377
378                 spi0_clk: clk@01c200a0 {
379                         #clock-cells = <0>;
380                         compatible = "allwinner,sun4i-a10-mod0-clk";
381                         reg = <0x01c200a0 0x4>;
382                         clocks = <&osc24M>, <&pll6 0>;
383                         clock-output-names = "spi0";
384                 };
385
386                 spi1_clk: clk@01c200a4 {
387                         #clock-cells = <0>;
388                         compatible = "allwinner,sun4i-a10-mod0-clk";
389                         reg = <0x01c200a4 0x4>;
390                         clocks = <&osc24M>, <&pll6 0>;
391                         clock-output-names = "spi1";
392                 };
393
394                 spi2_clk: clk@01c200a8 {
395                         #clock-cells = <0>;
396                         compatible = "allwinner,sun4i-a10-mod0-clk";
397                         reg = <0x01c200a8 0x4>;
398                         clocks = <&osc24M>, <&pll6 0>;
399                         clock-output-names = "spi2";
400                 };
401
402                 spi3_clk: clk@01c200ac {
403                         #clock-cells = <0>;
404                         compatible = "allwinner,sun4i-a10-mod0-clk";
405                         reg = <0x01c200ac 0x4>;
406                         clocks = <&osc24M>, <&pll6 0>;
407                         clock-output-names = "spi3";
408                 };
409
410                 usb_clk: clk@01c200cc {
411                         #clock-cells = <1>;
412                         #reset-cells = <1>;
413                         compatible = "allwinner,sun6i-a31-usb-clk";
414                         reg = <0x01c200cc 0x4>;
415                         clocks = <&osc24M>;
416                         clock-indices = <8>, <9>, <10>,
417                                         <16>, <17>,
418                                         <18>;
419                         clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
420                                              "usb_ohci0", "usb_ohci1",
421                                              "usb_ohci2";
422                 };
423
424                 /*
425                  * The following two are dummy clocks, placeholders
426                  * used in the gmac_tx clock. The gmac driver will
427                  * choose one parent depending on the PHY interface
428                  * mode, using clk_set_rate auto-reparenting.
429                  *
430                  * The actual TX clock rate is not controlled by the
431                  * gmac_tx clock.
432                  */
433                 mii_phy_tx_clk: clk@1 {
434                         #clock-cells = <0>;
435                         compatible = "fixed-clock";
436                         clock-frequency = <25000000>;
437                         clock-output-names = "mii_phy_tx";
438                 };
439
440                 gmac_int_tx_clk: clk@2 {
441                         #clock-cells = <0>;
442                         compatible = "fixed-clock";
443                         clock-frequency = <125000000>;
444                         clock-output-names = "gmac_int_tx";
445                 };
446
447                 gmac_tx_clk: clk@01c200d0 {
448                         #clock-cells = <0>;
449                         compatible = "allwinner,sun7i-a20-gmac-clk";
450                         reg = <0x01c200d0 0x4>;
451                         clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
452                         clock-output-names = "gmac_tx";
453                 };
454         };
455
456         soc@01c00000 {
457                 compatible = "simple-bus";
458                 #address-cells = <1>;
459                 #size-cells = <1>;
460                 ranges;
461
462                 dma: dma-controller@01c02000 {
463                         compatible = "allwinner,sun6i-a31-dma";
464                         reg = <0x01c02000 0x1000>;
465                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
466                         clocks = <&ahb1_gates 6>;
467                         resets = <&ahb1_rst 6>;
468                         #dma-cells = <1>;
469                 };
470
471                 mmc0: mmc@01c0f000 {
472                         compatible = "allwinner,sun5i-a13-mmc";
473                         reg = <0x01c0f000 0x1000>;
474                         clocks = <&ahb1_gates 8>,
475                                  <&mmc0_clk 0>,
476                                  <&mmc0_clk 1>,
477                                  <&mmc0_clk 2>;
478                         clock-names = "ahb",
479                                       "mmc",
480                                       "output",
481                                       "sample";
482                         resets = <&ahb1_rst 8>;
483                         reset-names = "ahb";
484                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
485                         status = "disabled";
486                         #address-cells = <1>;
487                         #size-cells = <0>;
488                 };
489
490                 mmc1: mmc@01c10000 {
491                         compatible = "allwinner,sun5i-a13-mmc";
492                         reg = <0x01c10000 0x1000>;
493                         clocks = <&ahb1_gates 9>,
494                                  <&mmc1_clk 0>,
495                                  <&mmc1_clk 1>,
496                                  <&mmc1_clk 2>;
497                         clock-names = "ahb",
498                                       "mmc",
499                                       "output",
500                                       "sample";
501                         resets = <&ahb1_rst 9>;
502                         reset-names = "ahb";
503                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
504                         status = "disabled";
505                         #address-cells = <1>;
506                         #size-cells = <0>;
507                 };
508
509                 mmc2: mmc@01c11000 {
510                         compatible = "allwinner,sun5i-a13-mmc";
511                         reg = <0x01c11000 0x1000>;
512                         clocks = <&ahb1_gates 10>,
513                                  <&mmc2_clk 0>,
514                                  <&mmc2_clk 1>,
515                                  <&mmc2_clk 2>;
516                         clock-names = "ahb",
517                                       "mmc",
518                                       "output",
519                                       "sample";
520                         resets = <&ahb1_rst 10>;
521                         reset-names = "ahb";
522                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
523                         status = "disabled";
524                         #address-cells = <1>;
525                         #size-cells = <0>;
526                 };
527
528                 mmc3: mmc@01c12000 {
529                         compatible = "allwinner,sun5i-a13-mmc";
530                         reg = <0x01c12000 0x1000>;
531                         clocks = <&ahb1_gates 11>,
532                                  <&mmc3_clk 0>,
533                                  <&mmc3_clk 1>,
534                                  <&mmc3_clk 2>;
535                         clock-names = "ahb",
536                                       "mmc",
537                                       "output",
538                                       "sample";
539                         resets = <&ahb1_rst 11>;
540                         reset-names = "ahb";
541                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
542                         status = "disabled";
543                         #address-cells = <1>;
544                         #size-cells = <0>;
545                 };
546
547                 usb_otg: usb@01c19000 {
548                         compatible = "allwinner,sun6i-a31-musb";
549                         reg = <0x01c19000 0x0400>;
550                         clocks = <&ahb1_gates 24>;
551                         resets = <&ahb1_rst 24>;
552                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
553                         interrupt-names = "mc";
554                         phys = <&usbphy 0>;
555                         phy-names = "usb";
556                         extcon = <&usbphy 0>;
557                         status = "disabled";
558                 };
559
560                 usbphy: phy@01c19400 {
561                         compatible = "allwinner,sun6i-a31-usb-phy";
562                         reg = <0x01c19400 0x10>,
563                               <0x01c1a800 0x4>,
564                               <0x01c1b800 0x4>;
565                         reg-names = "phy_ctrl",
566                                     "pmu1",
567                                     "pmu2";
568                         clocks = <&usb_clk 8>,
569                                  <&usb_clk 9>,
570                                  <&usb_clk 10>;
571                         clock-names = "usb0_phy",
572                                       "usb1_phy",
573                                       "usb2_phy";
574                         resets = <&usb_clk 0>,
575                                  <&usb_clk 1>,
576                                  <&usb_clk 2>;
577                         reset-names = "usb0_reset",
578                                       "usb1_reset",
579                                       "usb2_reset";
580                         status = "disabled";
581                         #phy-cells = <1>;
582                 };
583
584                 ehci0: usb@01c1a000 {
585                         compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
586                         reg = <0x01c1a000 0x100>;
587                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
588                         clocks = <&ahb1_gates 26>;
589                         resets = <&ahb1_rst 26>;
590                         phys = <&usbphy 1>;
591                         phy-names = "usb";
592                         status = "disabled";
593                 };
594
595                 ohci0: usb@01c1a400 {
596                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
597                         reg = <0x01c1a400 0x100>;
598                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
599                         clocks = <&ahb1_gates 29>, <&usb_clk 16>;
600                         resets = <&ahb1_rst 29>;
601                         phys = <&usbphy 1>;
602                         phy-names = "usb";
603                         status = "disabled";
604                 };
605
606                 ehci1: usb@01c1b000 {
607                         compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
608                         reg = <0x01c1b000 0x100>;
609                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
610                         clocks = <&ahb1_gates 27>;
611                         resets = <&ahb1_rst 27>;
612                         phys = <&usbphy 2>;
613                         phy-names = "usb";
614                         status = "disabled";
615                 };
616
617                 ohci1: usb@01c1b400 {
618                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
619                         reg = <0x01c1b400 0x100>;
620                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
621                         clocks = <&ahb1_gates 30>, <&usb_clk 17>;
622                         resets = <&ahb1_rst 30>;
623                         phys = <&usbphy 2>;
624                         phy-names = "usb";
625                         status = "disabled";
626                 };
627
628                 ohci2: usb@01c1c400 {
629                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
630                         reg = <0x01c1c400 0x100>;
631                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
632                         clocks = <&ahb1_gates 31>, <&usb_clk 18>;
633                         resets = <&ahb1_rst 31>;
634                         status = "disabled";
635                 };
636
637                 pio: pinctrl@01c20800 {
638                         compatible = "allwinner,sun6i-a31-pinctrl";
639                         reg = <0x01c20800 0x400>;
640                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
641                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
642                                      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
643                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
644                         clocks = <&apb1_gates 5>;
645                         gpio-controller;
646                         interrupt-controller;
647                         #interrupt-cells = <3>;
648                         #gpio-cells = <3>;
649
650                         uart0_pins_a: uart0@0 {
651                                 allwinner,pins = "PH20", "PH21";
652                                 allwinner,function = "uart0";
653                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
654                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
655                         };
656
657                         i2c0_pins_a: i2c0@0 {
658                                 allwinner,pins = "PH14", "PH15";
659                                 allwinner,function = "i2c0";
660                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
661                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
662                         };
663
664                         i2c1_pins_a: i2c1@0 {
665                                 allwinner,pins = "PH16", "PH17";
666                                 allwinner,function = "i2c1";
667                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
668                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
669                         };
670
671                         i2c2_pins_a: i2c2@0 {
672                                 allwinner,pins = "PH18", "PH19";
673                                 allwinner,function = "i2c2";
674                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
675                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
676                         };
677
678                         mmc0_pins_a: mmc0@0 {
679                                 allwinner,pins = "PF0", "PF1", "PF2",
680                                                  "PF3", "PF4", "PF5";
681                                 allwinner,function = "mmc0";
682                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
683                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
684                         };
685
686                         mmc1_pins_a: mmc1@0 {
687                                 allwinner,pins = "PG0", "PG1", "PG2", "PG3",
688                                                  "PG4", "PG5";
689                                 allwinner,function = "mmc1";
690                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
691                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
692                         };
693
694                         gmac_pins_mii_a: gmac_mii@0 {
695                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
696                                                 "PA8", "PA9", "PA11",
697                                                 "PA12", "PA13", "PA14", "PA19",
698                                                 "PA20", "PA21", "PA22", "PA23",
699                                                 "PA24", "PA26", "PA27";
700                                 allwinner,function = "gmac";
701                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
702                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
703                         };
704
705                         gmac_pins_gmii_a: gmac_gmii@0 {
706                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
707                                                 "PA4", "PA5", "PA6", "PA7",
708                                                 "PA8", "PA9", "PA10", "PA11",
709                                                 "PA12", "PA13", "PA14", "PA15",
710                                                 "PA16", "PA17", "PA18", "PA19",
711                                                 "PA20", "PA21", "PA22", "PA23",
712                                                 "PA24", "PA25", "PA26", "PA27";
713                                 allwinner,function = "gmac";
714                                 /*
715                                  * data lines in GMII mode run at 125MHz and
716                                  * might need a higher signal drive strength
717                                  */
718                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
719                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
720                         };
721
722                         gmac_pins_rgmii_a: gmac_rgmii@0 {
723                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
724                                                 "PA9", "PA10", "PA11",
725                                                 "PA12", "PA13", "PA14", "PA19",
726                                                 "PA20", "PA25", "PA26", "PA27";
727                                 allwinner,function = "gmac";
728                                 /*
729                                  * data lines in RGMII mode use DDR mode
730                                  * and need a higher signal drive strength
731                                  */
732                                 allwinner,drive = <SUN4I_PINCTRL_40_MA>;
733                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
734                         };
735                 };
736
737                 ahb1_rst: reset@01c202c0 {
738                         #reset-cells = <1>;
739                         compatible = "allwinner,sun6i-a31-ahb1-reset";
740                         reg = <0x01c202c0 0xc>;
741                 };
742
743                 apb1_rst: reset@01c202d0 {
744                         #reset-cells = <1>;
745                         compatible = "allwinner,sun6i-a31-clock-reset";
746                         reg = <0x01c202d0 0x4>;
747                 };
748
749                 apb2_rst: reset@01c202d8 {
750                         #reset-cells = <1>;
751                         compatible = "allwinner,sun6i-a31-clock-reset";
752                         reg = <0x01c202d8 0x4>;
753                 };
754
755                 timer@01c20c00 {
756                         compatible = "allwinner,sun4i-a10-timer";
757                         reg = <0x01c20c00 0xa0>;
758                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
759                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
760                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
761                                      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
762                                      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
763                         clocks = <&osc24M>;
764                 };
765
766                 wdt1: watchdog@01c20ca0 {
767                         compatible = "allwinner,sun6i-a31-wdt";
768                         reg = <0x01c20ca0 0x20>;
769                 };
770
771                 rtp: rtp@01c25000 {
772                         compatible = "allwinner,sun6i-a31-ts";
773                         reg = <0x01c25000 0x100>;
774                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
775                         #thermal-sensor-cells = <0>;
776                 };
777
778                 uart0: serial@01c28000 {
779                         compatible = "snps,dw-apb-uart";
780                         reg = <0x01c28000 0x400>;
781                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
782                         reg-shift = <2>;
783                         reg-io-width = <4>;
784                         clocks = <&apb2_gates 16>;
785                         resets = <&apb2_rst 16>;
786                         dmas = <&dma 6>, <&dma 6>;
787                         dma-names = "rx", "tx";
788                         status = "disabled";
789                 };
790
791                 uart1: serial@01c28400 {
792                         compatible = "snps,dw-apb-uart";
793                         reg = <0x01c28400 0x400>;
794                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
795                         reg-shift = <2>;
796                         reg-io-width = <4>;
797                         clocks = <&apb2_gates 17>;
798                         resets = <&apb2_rst 17>;
799                         dmas = <&dma 7>, <&dma 7>;
800                         dma-names = "rx", "tx";
801                         status = "disabled";
802                 };
803
804                 uart2: serial@01c28800 {
805                         compatible = "snps,dw-apb-uart";
806                         reg = <0x01c28800 0x400>;
807                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
808                         reg-shift = <2>;
809                         reg-io-width = <4>;
810                         clocks = <&apb2_gates 18>;
811                         resets = <&apb2_rst 18>;
812                         dmas = <&dma 8>, <&dma 8>;
813                         dma-names = "rx", "tx";
814                         status = "disabled";
815                 };
816
817                 uart3: serial@01c28c00 {
818                         compatible = "snps,dw-apb-uart";
819                         reg = <0x01c28c00 0x400>;
820                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
821                         reg-shift = <2>;
822                         reg-io-width = <4>;
823                         clocks = <&apb2_gates 19>;
824                         resets = <&apb2_rst 19>;
825                         dmas = <&dma 9>, <&dma 9>;
826                         dma-names = "rx", "tx";
827                         status = "disabled";
828                 };
829
830                 uart4: serial@01c29000 {
831                         compatible = "snps,dw-apb-uart";
832                         reg = <0x01c29000 0x400>;
833                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
834                         reg-shift = <2>;
835                         reg-io-width = <4>;
836                         clocks = <&apb2_gates 20>;
837                         resets = <&apb2_rst 20>;
838                         dmas = <&dma 10>, <&dma 10>;
839                         dma-names = "rx", "tx";
840                         status = "disabled";
841                 };
842
843                 uart5: serial@01c29400 {
844                         compatible = "snps,dw-apb-uart";
845                         reg = <0x01c29400 0x400>;
846                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
847                         reg-shift = <2>;
848                         reg-io-width = <4>;
849                         clocks = <&apb2_gates 21>;
850                         resets = <&apb2_rst 21>;
851                         dmas = <&dma 22>, <&dma 22>;
852                         dma-names = "rx", "tx";
853                         status = "disabled";
854                 };
855
856                 i2c0: i2c@01c2ac00 {
857                         compatible = "allwinner,sun6i-a31-i2c";
858                         reg = <0x01c2ac00 0x400>;
859                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
860                         clocks = <&apb2_gates 0>;
861                         resets = <&apb2_rst 0>;
862                         status = "disabled";
863                         #address-cells = <1>;
864                         #size-cells = <0>;
865                 };
866
867                 i2c1: i2c@01c2b000 {
868                         compatible = "allwinner,sun6i-a31-i2c";
869                         reg = <0x01c2b000 0x400>;
870                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
871                         clocks = <&apb2_gates 1>;
872                         resets = <&apb2_rst 1>;
873                         status = "disabled";
874                         #address-cells = <1>;
875                         #size-cells = <0>;
876                 };
877
878                 i2c2: i2c@01c2b400 {
879                         compatible = "allwinner,sun6i-a31-i2c";
880                         reg = <0x01c2b400 0x400>;
881                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
882                         clocks = <&apb2_gates 2>;
883                         resets = <&apb2_rst 2>;
884                         status = "disabled";
885                         #address-cells = <1>;
886                         #size-cells = <0>;
887                 };
888
889                 i2c3: i2c@01c2b800 {
890                         compatible = "allwinner,sun6i-a31-i2c";
891                         reg = <0x01c2b800 0x400>;
892                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
893                         clocks = <&apb2_gates 3>;
894                         resets = <&apb2_rst 3>;
895                         status = "disabled";
896                         #address-cells = <1>;
897                         #size-cells = <0>;
898                 };
899
900                 gmac: ethernet@01c30000 {
901                         compatible = "allwinner,sun7i-a20-gmac";
902                         reg = <0x01c30000 0x1054>;
903                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
904                         interrupt-names = "macirq";
905                         clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
906                         clock-names = "stmmaceth", "allwinner_gmac_tx";
907                         resets = <&ahb1_rst 17>;
908                         reset-names = "stmmaceth";
909                         snps,pbl = <2>;
910                         snps,fixed-burst;
911                         snps,force_sf_dma_mode;
912                         status = "disabled";
913                         #address-cells = <1>;
914                         #size-cells = <0>;
915                 };
916
917                 crypto: crypto-engine@01c15000 {
918                         compatible = "allwinner,sun4i-a10-crypto";
919                         reg = <0x01c15000 0x1000>;
920                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
921                         clocks = <&ahb1_gates 5>, <&ss_clk>;
922                         clock-names = "ahb", "mod";
923                         resets = <&ahb1_rst 5>;
924                         reset-names = "ahb";
925                 };
926
927                 timer@01c60000 {
928                         compatible = "allwinner,sun6i-a31-hstimer",
929                                      "allwinner,sun7i-a20-hstimer";
930                         reg = <0x01c60000 0x1000>;
931                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
932                                      <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
933                                      <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
934                                      <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
935                         clocks = <&ahb1_gates 19>;
936                         resets = <&ahb1_rst 19>;
937                 };
938
939                 spi0: spi@01c68000 {
940                         compatible = "allwinner,sun6i-a31-spi";
941                         reg = <0x01c68000 0x1000>;
942                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
943                         clocks = <&ahb1_gates 20>, <&spi0_clk>;
944                         clock-names = "ahb", "mod";
945                         dmas = <&dma 23>, <&dma 23>;
946                         dma-names = "rx", "tx";
947                         resets = <&ahb1_rst 20>;
948                         status = "disabled";
949                 };
950
951                 spi1: spi@01c69000 {
952                         compatible = "allwinner,sun6i-a31-spi";
953                         reg = <0x01c69000 0x1000>;
954                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
955                         clocks = <&ahb1_gates 21>, <&spi1_clk>;
956                         clock-names = "ahb", "mod";
957                         dmas = <&dma 24>, <&dma 24>;
958                         dma-names = "rx", "tx";
959                         resets = <&ahb1_rst 21>;
960                         status = "disabled";
961                 };
962
963                 spi2: spi@01c6a000 {
964                         compatible = "allwinner,sun6i-a31-spi";
965                         reg = <0x01c6a000 0x1000>;
966                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
967                         clocks = <&ahb1_gates 22>, <&spi2_clk>;
968                         clock-names = "ahb", "mod";
969                         dmas = <&dma 25>, <&dma 25>;
970                         dma-names = "rx", "tx";
971                         resets = <&ahb1_rst 22>;
972                         status = "disabled";
973                 };
974
975                 spi3: spi@01c6b000 {
976                         compatible = "allwinner,sun6i-a31-spi";
977                         reg = <0x01c6b000 0x1000>;
978                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
979                         clocks = <&ahb1_gates 23>, <&spi3_clk>;
980                         clock-names = "ahb", "mod";
981                         dmas = <&dma 26>, <&dma 26>;
982                         dma-names = "rx", "tx";
983                         resets = <&ahb1_rst 23>;
984                         status = "disabled";
985                 };
986
987                 gic: interrupt-controller@01c81000 {
988                         compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
989                         reg = <0x01c81000 0x1000>,
990                               <0x01c82000 0x1000>,
991                               <0x01c84000 0x2000>,
992                               <0x01c86000 0x2000>;
993                         interrupt-controller;
994                         #interrupt-cells = <3>;
995                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
996                 };
997
998                 rtc: rtc@01f00000 {
999                         compatible = "allwinner,sun6i-a31-rtc";
1000                         reg = <0x01f00000 0x54>;
1001                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
1002                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1003                 };
1004
1005                 nmi_intc: interrupt-controller@01f00c0c {
1006                         compatible = "allwinner,sun6i-a31-sc-nmi";
1007                         interrupt-controller;
1008                         #interrupt-cells = <2>;
1009                         reg = <0x01f00c0c 0x38>;
1010                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
1011                 };
1012
1013                 prcm@01f01400 {
1014                         compatible = "allwinner,sun6i-a31-prcm";
1015                         reg = <0x01f01400 0x200>;
1016
1017                         ar100: ar100_clk {
1018                                 compatible = "allwinner,sun6i-a31-ar100-clk";
1019                                 #clock-cells = <0>;
1020                                 clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
1021                                          <&pll6 0>;
1022                                 clock-output-names = "ar100";
1023                         };
1024
1025                         ahb0: ahb0_clk {
1026                                 compatible = "fixed-factor-clock";
1027                                 #clock-cells = <0>;
1028                                 clock-div = <1>;
1029                                 clock-mult = <1>;
1030                                 clocks = <&ar100>;
1031                                 clock-output-names = "ahb0";
1032                         };
1033
1034                         apb0: apb0_clk {
1035                                 compatible = "allwinner,sun6i-a31-apb0-clk";
1036                                 #clock-cells = <0>;
1037                                 clocks = <&ahb0>;
1038                                 clock-output-names = "apb0";
1039                         };
1040
1041                         apb0_gates: apb0_gates_clk {
1042                                 compatible = "allwinner,sun6i-a31-apb0-gates-clk";
1043                                 #clock-cells = <1>;
1044                                 clocks = <&apb0>;
1045                                 clock-output-names = "apb0_pio", "apb0_ir",
1046                                                 "apb0_timer", "apb0_p2wi",
1047                                                 "apb0_uart", "apb0_1wire",
1048                                                 "apb0_i2c";
1049                         };
1050
1051                         ir_clk: ir_clk {
1052                                 #clock-cells = <0>;
1053                                 compatible = "allwinner,sun4i-a10-mod0-clk";
1054                                 clocks = <&osc32k>, <&osc24M>;
1055                                 clock-output-names = "ir";
1056                         };
1057
1058                         apb0_rst: apb0_rst {
1059                                 compatible = "allwinner,sun6i-a31-clock-reset";
1060                                 #reset-cells = <1>;
1061                         };
1062                 };
1063
1064                 cpucfg@01f01c00 {
1065                         compatible = "allwinner,sun6i-a31-cpuconfig";
1066                         reg = <0x01f01c00 0x300>;
1067                 };
1068
1069                 ir: ir@01f02000 {
1070                         compatible = "allwinner,sun5i-a13-ir";
1071                         clocks = <&apb0_gates 1>, <&ir_clk>;
1072                         clock-names = "apb", "ir";
1073                         resets = <&apb0_rst 1>;
1074                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1075                         reg = <0x01f02000 0x40>;
1076                         status = "disabled";
1077                 };
1078
1079                 r_pio: pinctrl@01f02c00 {
1080                         compatible = "allwinner,sun6i-a31-r-pinctrl";
1081                         reg = <0x01f02c00 0x400>;
1082                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
1083                                      <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
1084                         clocks = <&apb0_gates 0>;
1085                         resets = <&apb0_rst 0>;
1086                         gpio-controller;
1087                         interrupt-controller;
1088                         #interrupt-cells = <2>;
1089                         #size-cells = <0>;
1090                         #gpio-cells = <3>;
1091
1092                         ir_pins_a: ir@0 {
1093                                 allwinner,pins = "PL4";
1094                                 allwinner,function = "s_ir";
1095                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
1096                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
1097                         };
1098
1099                         p2wi_pins: p2wi {
1100                                 allwinner,pins = "PL0", "PL1";
1101                                 allwinner,function = "s_p2wi";
1102                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
1103                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
1104                         };
1105                 };
1106
1107                 p2wi: i2c@01f03400 {
1108                         compatible = "allwinner,sun6i-a31-p2wi";
1109                         reg = <0x01f03400 0x400>;
1110                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
1111                         clocks = <&apb0_gates 3>;
1112                         clock-frequency = <100000>;
1113                         resets = <&apb0_rst 3>;
1114                         pinctrl-names = "default";
1115                         pinctrl-0 = <&p2wi_pins>;
1116                         status = "disabled";
1117                         #address-cells = <1>;
1118                         #size-cells = <0>;
1119                 };
1120         };
1121 };