3 * Generic Bluetooth USB driver
5 * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/module.h>
25 #include <linux/usb.h>
26 #include <linux/firmware.h>
27 #include <asm/unaligned.h>
29 #include <net/bluetooth/bluetooth.h>
30 #include <net/bluetooth/hci_core.h>
38 static bool disable_scofix;
39 static bool force_scofix;
41 static bool reset = true;
43 static struct usb_driver btusb_driver;
45 #define BTUSB_IGNORE 0x01
46 #define BTUSB_DIGIANSWER 0x02
47 #define BTUSB_CSR 0x04
48 #define BTUSB_SNIFFER 0x08
49 #define BTUSB_BCM92035 0x10
50 #define BTUSB_BROKEN_ISOC 0x20
51 #define BTUSB_WRONG_SCO_MTU 0x40
52 #define BTUSB_ATH3012 0x80
53 #define BTUSB_INTEL 0x100
54 #define BTUSB_INTEL_BOOT 0x200
55 #define BTUSB_BCM_PATCHRAM 0x400
56 #define BTUSB_MARVELL 0x800
57 #define BTUSB_SWAVE 0x1000
58 #define BTUSB_INTEL_NEW 0x2000
59 #define BTUSB_AMP 0x4000
60 #define BTUSB_QCA_ROME 0x8000
61 #define BTUSB_BCM_APPLE 0x10000
62 #define BTUSB_REALTEK 0x20000
63 #define BTUSB_BCM2045 0x40000
65 static const struct usb_device_id btusb_table[] = {
66 /* Generic Bluetooth USB device */
67 { USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
69 /* Generic Bluetooth AMP device */
70 { USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
72 /* Generic Bluetooth USB interface */
73 { USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
75 /* Apple-specific (Broadcom) devices */
76 { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
77 .driver_info = BTUSB_BCM_APPLE },
79 /* MediaTek MT76x0E */
80 { USB_DEVICE(0x0e8d, 0x763f) },
82 /* Broadcom SoftSailing reporting vendor specific */
83 { USB_DEVICE(0x0a5c, 0x21e1) },
85 /* Apple MacBookPro 7,1 */
86 { USB_DEVICE(0x05ac, 0x8213) },
89 { USB_DEVICE(0x05ac, 0x8215) },
91 /* Apple MacBookPro6,2 */
92 { USB_DEVICE(0x05ac, 0x8218) },
94 /* Apple MacBookAir3,1, MacBookAir3,2 */
95 { USB_DEVICE(0x05ac, 0x821b) },
97 /* Apple MacBookAir4,1 */
98 { USB_DEVICE(0x05ac, 0x821f) },
100 /* Apple MacBookPro8,2 */
101 { USB_DEVICE(0x05ac, 0x821a) },
103 /* Apple MacMini5,1 */
104 { USB_DEVICE(0x05ac, 0x8281) },
106 /* AVM BlueFRITZ! USB v2.0 */
107 { USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
109 /* Bluetooth Ultraport Module from IBM */
110 { USB_DEVICE(0x04bf, 0x030a) },
112 /* ALPS Modules with non-standard id */
113 { USB_DEVICE(0x044e, 0x3001) },
114 { USB_DEVICE(0x044e, 0x3002) },
116 /* Ericsson with non-standard id */
117 { USB_DEVICE(0x0bdb, 0x1002) },
119 /* Canyon CN-BTU1 with HID interfaces */
120 { USB_DEVICE(0x0c10, 0x0000) },
122 /* Broadcom BCM20702A0 */
123 { USB_DEVICE(0x413c, 0x8197) },
125 /* Broadcom BCM20702B0 (Dynex/Insignia) */
126 { USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
128 /* Broadcom BCM43142A0 (Foxconn/Lenovo) */
129 { USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },
131 /* Foxconn - Hon Hai */
132 { USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
133 .driver_info = BTUSB_BCM_PATCHRAM },
135 /* Lite-On Technology - Broadcom based */
136 { USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
137 .driver_info = BTUSB_BCM_PATCHRAM },
139 /* Broadcom devices with vendor specific id */
140 { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
141 .driver_info = BTUSB_BCM_PATCHRAM },
143 /* ASUSTek Computer - Broadcom based */
144 { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
145 .driver_info = BTUSB_BCM_PATCHRAM },
147 /* Belkin F8065bf - Broadcom based */
148 { USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
149 .driver_info = BTUSB_BCM_PATCHRAM },
151 /* IMC Networks - Broadcom based */
152 { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
153 .driver_info = BTUSB_BCM_PATCHRAM },
155 /* Intel Bluetooth USB Bootloader (RAM module) */
156 { USB_DEVICE(0x8087, 0x0a5a),
157 .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
159 { } /* Terminating entry */
162 MODULE_DEVICE_TABLE(usb, btusb_table);
164 static const struct usb_device_id blacklist_table[] = {
165 /* CSR BlueCore devices */
166 { USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
168 /* Broadcom BCM2033 without firmware */
169 { USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
171 /* Broadcom BCM2045 devices */
172 { USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
174 /* Atheros 3011 with sflash firmware */
175 { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
176 { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
177 { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
178 { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
179 { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
180 { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
181 { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
183 /* Atheros AR9285 Malbec with sflash firmware */
184 { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
186 /* Atheros 3012 with sflash firmware */
187 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
188 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
189 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
190 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
191 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
192 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
193 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
194 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
195 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
196 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
197 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
198 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
199 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
200 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
201 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
202 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
203 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
204 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
205 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
206 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
207 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
208 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
209 { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
210 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
211 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
212 { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
213 { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
214 { USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
215 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
216 { USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
217 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
218 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
219 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
220 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
221 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
222 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
223 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
224 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
225 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
226 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
227 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
228 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
230 /* Atheros AR5BBU12 with sflash firmware */
231 { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
233 /* Atheros AR5BBU12 with sflash firmware */
234 { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
235 { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
237 /* QCA ROME chipset */
238 { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
239 { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
240 { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
242 /* Broadcom BCM2035 */
243 { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
244 { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
245 { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
247 /* Broadcom BCM2045 */
248 { USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
249 { USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
251 /* IBM/Lenovo ThinkPad with Broadcom chip */
252 { USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
253 { USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
255 /* HP laptop with Broadcom chip */
256 { USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
258 /* Dell laptop with Broadcom chip */
259 { USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
261 /* Dell Wireless 370 and 410 devices */
262 { USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
263 { USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
265 /* Belkin F8T012 and F8T013 devices */
266 { USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
267 { USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
269 /* Asus WL-BTD202 device */
270 { USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
272 /* Kensington Bluetooth USB adapter */
273 { USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
275 /* RTX Telecom based adapters with buggy SCO support */
276 { USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
277 { USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
279 /* CONWISE Technology based adapters with buggy SCO support */
280 { USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
282 /* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
283 { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
285 /* Digianswer devices */
286 { USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
287 { USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
289 /* CSR BlueCore Bluetooth Sniffer */
290 { USB_DEVICE(0x0a12, 0x0002),
291 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
293 /* Frontline ComProbe Bluetooth Sniffer */
294 { USB_DEVICE(0x16d3, 0x0002),
295 .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
297 /* Marvell Bluetooth devices */
298 { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
299 { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
301 /* Intel Bluetooth devices */
302 { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
303 { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
304 { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
305 { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
307 /* Other Intel Bluetooth devices */
308 { USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
309 .driver_info = BTUSB_IGNORE },
311 /* Realtek Bluetooth devices */
312 { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
313 .driver_info = BTUSB_REALTEK },
315 /* Additional Realtek 8723AE Bluetooth devices */
316 { USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
317 { USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
319 /* Additional Realtek 8723BE Bluetooth devices */
320 { USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
321 { USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
322 { USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
323 { USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
324 { USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
326 /* Additional Realtek 8821AE Bluetooth devices */
327 { USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
328 { USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
329 { USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
330 { USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
331 { USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
333 /* Silicon Wave based devices */
334 { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
336 { } /* Terminating entry */
339 #define BTUSB_MAX_ISOC_FRAMES 10
341 #define BTUSB_INTR_RUNNING 0
342 #define BTUSB_BULK_RUNNING 1
343 #define BTUSB_ISOC_RUNNING 2
344 #define BTUSB_SUSPENDING 3
345 #define BTUSB_DID_ISO_RESUME 4
346 #define BTUSB_BOOTLOADER 5
347 #define BTUSB_DOWNLOADING 6
348 #define BTUSB_FIRMWARE_LOADED 7
349 #define BTUSB_FIRMWARE_FAILED 8
350 #define BTUSB_BOOTING 9
351 #define BTUSB_RESET_RESUME 10
352 #define BTUSB_DIAG_RUNNING 11
355 struct hci_dev *hdev;
356 struct usb_device *udev;
357 struct usb_interface *intf;
358 struct usb_interface *isoc;
359 struct usb_interface *diag;
363 struct work_struct work;
364 struct work_struct waker;
366 struct usb_anchor deferred;
367 struct usb_anchor tx_anchor;
371 struct usb_anchor intr_anchor;
372 struct usb_anchor bulk_anchor;
373 struct usb_anchor isoc_anchor;
374 struct usb_anchor diag_anchor;
377 struct sk_buff *evt_skb;
378 struct sk_buff *acl_skb;
379 struct sk_buff *sco_skb;
381 struct usb_endpoint_descriptor *intr_ep;
382 struct usb_endpoint_descriptor *bulk_tx_ep;
383 struct usb_endpoint_descriptor *bulk_rx_ep;
384 struct usb_endpoint_descriptor *isoc_tx_ep;
385 struct usb_endpoint_descriptor *isoc_rx_ep;
386 struct usb_endpoint_descriptor *diag_tx_ep;
387 struct usb_endpoint_descriptor *diag_rx_ep;
392 unsigned int sco_num;
396 int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
397 int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
399 int (*setup_on_usb)(struct hci_dev *hdev);
402 static inline void btusb_free_frags(struct btusb_data *data)
406 spin_lock_irqsave(&data->rxlock, flags);
408 kfree_skb(data->evt_skb);
409 data->evt_skb = NULL;
411 kfree_skb(data->acl_skb);
412 data->acl_skb = NULL;
414 kfree_skb(data->sco_skb);
415 data->sco_skb = NULL;
417 spin_unlock_irqrestore(&data->rxlock, flags);
420 static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
425 spin_lock(&data->rxlock);
432 skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
438 bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
439 bt_cb(skb)->expect = HCI_EVENT_HDR_SIZE;
442 len = min_t(uint, bt_cb(skb)->expect, count);
443 memcpy(skb_put(skb, len), buffer, len);
447 bt_cb(skb)->expect -= len;
449 if (skb->len == HCI_EVENT_HDR_SIZE) {
450 /* Complete event header */
451 bt_cb(skb)->expect = hci_event_hdr(skb)->plen;
453 if (skb_tailroom(skb) < bt_cb(skb)->expect) {
462 if (bt_cb(skb)->expect == 0) {
464 data->recv_event(data->hdev, skb);
470 spin_unlock(&data->rxlock);
475 static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
480 spin_lock(&data->rxlock);
487 skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
493 bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
494 bt_cb(skb)->expect = HCI_ACL_HDR_SIZE;
497 len = min_t(uint, bt_cb(skb)->expect, count);
498 memcpy(skb_put(skb, len), buffer, len);
502 bt_cb(skb)->expect -= len;
504 if (skb->len == HCI_ACL_HDR_SIZE) {
505 __le16 dlen = hci_acl_hdr(skb)->dlen;
507 /* Complete ACL header */
508 bt_cb(skb)->expect = __le16_to_cpu(dlen);
510 if (skb_tailroom(skb) < bt_cb(skb)->expect) {
519 if (bt_cb(skb)->expect == 0) {
521 hci_recv_frame(data->hdev, skb);
527 spin_unlock(&data->rxlock);
532 static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
537 spin_lock(&data->rxlock);
544 skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
550 bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
551 bt_cb(skb)->expect = HCI_SCO_HDR_SIZE;
554 len = min_t(uint, bt_cb(skb)->expect, count);
555 memcpy(skb_put(skb, len), buffer, len);
559 bt_cb(skb)->expect -= len;
561 if (skb->len == HCI_SCO_HDR_SIZE) {
562 /* Complete SCO header */
563 bt_cb(skb)->expect = hci_sco_hdr(skb)->dlen;
565 if (skb_tailroom(skb) < bt_cb(skb)->expect) {
574 if (bt_cb(skb)->expect == 0) {
576 hci_recv_frame(data->hdev, skb);
582 spin_unlock(&data->rxlock);
587 static void btusb_intr_complete(struct urb *urb)
589 struct hci_dev *hdev = urb->context;
590 struct btusb_data *data = hci_get_drvdata(hdev);
593 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
596 if (!test_bit(HCI_RUNNING, &hdev->flags))
599 if (urb->status == 0) {
600 hdev->stat.byte_rx += urb->actual_length;
602 if (btusb_recv_intr(data, urb->transfer_buffer,
603 urb->actual_length) < 0) {
604 BT_ERR("%s corrupted event packet", hdev->name);
607 } else if (urb->status == -ENOENT) {
608 /* Avoid suspend failed when usb_kill_urb */
612 if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
615 usb_mark_last_busy(data->udev);
616 usb_anchor_urb(urb, &data->intr_anchor);
618 err = usb_submit_urb(urb, GFP_ATOMIC);
620 /* -EPERM: urb is being killed;
621 * -ENODEV: device got disconnected */
622 if (err != -EPERM && err != -ENODEV)
623 BT_ERR("%s urb %p failed to resubmit (%d)",
624 hdev->name, urb, -err);
625 usb_unanchor_urb(urb);
629 static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
631 struct btusb_data *data = hci_get_drvdata(hdev);
637 BT_DBG("%s", hdev->name);
642 urb = usb_alloc_urb(0, mem_flags);
646 size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
648 buf = kmalloc(size, mem_flags);
654 pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
656 usb_fill_int_urb(urb, data->udev, pipe, buf, size,
657 btusb_intr_complete, hdev, data->intr_ep->bInterval);
659 urb->transfer_flags |= URB_FREE_BUFFER;
661 usb_anchor_urb(urb, &data->intr_anchor);
663 err = usb_submit_urb(urb, mem_flags);
665 if (err != -EPERM && err != -ENODEV)
666 BT_ERR("%s urb %p submission failed (%d)",
667 hdev->name, urb, -err);
668 usb_unanchor_urb(urb);
676 static void btusb_bulk_complete(struct urb *urb)
678 struct hci_dev *hdev = urb->context;
679 struct btusb_data *data = hci_get_drvdata(hdev);
682 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
685 if (!test_bit(HCI_RUNNING, &hdev->flags))
688 if (urb->status == 0) {
689 hdev->stat.byte_rx += urb->actual_length;
691 if (data->recv_bulk(data, urb->transfer_buffer,
692 urb->actual_length) < 0) {
693 BT_ERR("%s corrupted ACL packet", hdev->name);
696 } else if (urb->status == -ENOENT) {
697 /* Avoid suspend failed when usb_kill_urb */
701 if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
704 usb_anchor_urb(urb, &data->bulk_anchor);
705 usb_mark_last_busy(data->udev);
707 err = usb_submit_urb(urb, GFP_ATOMIC);
709 /* -EPERM: urb is being killed;
710 * -ENODEV: device got disconnected */
711 if (err != -EPERM && err != -ENODEV)
712 BT_ERR("%s urb %p failed to resubmit (%d)",
713 hdev->name, urb, -err);
714 usb_unanchor_urb(urb);
718 static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
720 struct btusb_data *data = hci_get_drvdata(hdev);
724 int err, size = HCI_MAX_FRAME_SIZE;
726 BT_DBG("%s", hdev->name);
728 if (!data->bulk_rx_ep)
731 urb = usb_alloc_urb(0, mem_flags);
735 buf = kmalloc(size, mem_flags);
741 pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
743 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
744 btusb_bulk_complete, hdev);
746 urb->transfer_flags |= URB_FREE_BUFFER;
748 usb_mark_last_busy(data->udev);
749 usb_anchor_urb(urb, &data->bulk_anchor);
751 err = usb_submit_urb(urb, mem_flags);
753 if (err != -EPERM && err != -ENODEV)
754 BT_ERR("%s urb %p submission failed (%d)",
755 hdev->name, urb, -err);
756 usb_unanchor_urb(urb);
764 static void btusb_isoc_complete(struct urb *urb)
766 struct hci_dev *hdev = urb->context;
767 struct btusb_data *data = hci_get_drvdata(hdev);
770 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
773 if (!test_bit(HCI_RUNNING, &hdev->flags))
776 if (urb->status == 0) {
777 for (i = 0; i < urb->number_of_packets; i++) {
778 unsigned int offset = urb->iso_frame_desc[i].offset;
779 unsigned int length = urb->iso_frame_desc[i].actual_length;
781 if (urb->iso_frame_desc[i].status)
784 hdev->stat.byte_rx += length;
786 if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
788 BT_ERR("%s corrupted SCO packet", hdev->name);
792 } else if (urb->status == -ENOENT) {
793 /* Avoid suspend failed when usb_kill_urb */
797 if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
800 usb_anchor_urb(urb, &data->isoc_anchor);
802 err = usb_submit_urb(urb, GFP_ATOMIC);
804 /* -EPERM: urb is being killed;
805 * -ENODEV: device got disconnected */
806 if (err != -EPERM && err != -ENODEV)
807 BT_ERR("%s urb %p failed to resubmit (%d)",
808 hdev->name, urb, -err);
809 usb_unanchor_urb(urb);
813 static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
817 BT_DBG("len %d mtu %d", len, mtu);
819 for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
820 i++, offset += mtu, len -= mtu) {
821 urb->iso_frame_desc[i].offset = offset;
822 urb->iso_frame_desc[i].length = mtu;
825 if (len && i < BTUSB_MAX_ISOC_FRAMES) {
826 urb->iso_frame_desc[i].offset = offset;
827 urb->iso_frame_desc[i].length = len;
831 urb->number_of_packets = i;
834 static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
836 struct btusb_data *data = hci_get_drvdata(hdev);
842 BT_DBG("%s", hdev->name);
844 if (!data->isoc_rx_ep)
847 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
851 size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
852 BTUSB_MAX_ISOC_FRAMES;
854 buf = kmalloc(size, mem_flags);
860 pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
862 usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
863 hdev, data->isoc_rx_ep->bInterval);
865 urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
867 __fill_isoc_descriptor(urb, size,
868 le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
870 usb_anchor_urb(urb, &data->isoc_anchor);
872 err = usb_submit_urb(urb, mem_flags);
874 if (err != -EPERM && err != -ENODEV)
875 BT_ERR("%s urb %p submission failed (%d)",
876 hdev->name, urb, -err);
877 usb_unanchor_urb(urb);
885 static void btusb_diag_complete(struct urb *urb)
887 struct hci_dev *hdev = urb->context;
888 struct btusb_data *data = hci_get_drvdata(hdev);
891 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
894 if (urb->status == 0) {
897 skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
899 memcpy(skb_put(skb, urb->actual_length),
900 urb->transfer_buffer, urb->actual_length);
901 hci_recv_diag(hdev, skb);
903 } else if (urb->status == -ENOENT) {
904 /* Avoid suspend failed when usb_kill_urb */
908 if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
911 usb_anchor_urb(urb, &data->diag_anchor);
912 usb_mark_last_busy(data->udev);
914 err = usb_submit_urb(urb, GFP_ATOMIC);
916 /* -EPERM: urb is being killed;
917 * -ENODEV: device got disconnected */
918 if (err != -EPERM && err != -ENODEV)
919 BT_ERR("%s urb %p failed to resubmit (%d)",
920 hdev->name, urb, -err);
921 usb_unanchor_urb(urb);
925 static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
927 struct btusb_data *data = hci_get_drvdata(hdev);
931 int err, size = HCI_MAX_FRAME_SIZE;
933 BT_DBG("%s", hdev->name);
935 if (!data->diag_rx_ep)
938 urb = usb_alloc_urb(0, mem_flags);
942 buf = kmalloc(size, mem_flags);
948 pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
950 usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
951 btusb_diag_complete, hdev);
953 urb->transfer_flags |= URB_FREE_BUFFER;
955 usb_mark_last_busy(data->udev);
956 usb_anchor_urb(urb, &data->diag_anchor);
958 err = usb_submit_urb(urb, mem_flags);
960 if (err != -EPERM && err != -ENODEV)
961 BT_ERR("%s urb %p submission failed (%d)",
962 hdev->name, urb, -err);
963 usb_unanchor_urb(urb);
971 static void btusb_tx_complete(struct urb *urb)
973 struct sk_buff *skb = urb->context;
974 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
975 struct btusb_data *data = hci_get_drvdata(hdev);
977 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
980 if (!test_bit(HCI_RUNNING, &hdev->flags))
984 hdev->stat.byte_tx += urb->transfer_buffer_length;
989 spin_lock(&data->txlock);
990 data->tx_in_flight--;
991 spin_unlock(&data->txlock);
993 kfree(urb->setup_packet);
998 static void btusb_isoc_tx_complete(struct urb *urb)
1000 struct sk_buff *skb = urb->context;
1001 struct hci_dev *hdev = (struct hci_dev *)skb->dev;
1003 BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
1004 urb->actual_length);
1006 if (!test_bit(HCI_RUNNING, &hdev->flags))
1010 hdev->stat.byte_tx += urb->transfer_buffer_length;
1012 hdev->stat.err_tx++;
1015 kfree(urb->setup_packet);
1020 static int btusb_open(struct hci_dev *hdev)
1022 struct btusb_data *data = hci_get_drvdata(hdev);
1025 BT_DBG("%s", hdev->name);
1027 /* Patching USB firmware files prior to starting any URBs of HCI path
1028 * It is more safe to use USB bulk channel for downloading USB patch
1030 if (data->setup_on_usb) {
1031 err = data->setup_on_usb(hdev);
1036 err = usb_autopm_get_interface(data->intf);
1040 data->intf->needs_remote_wakeup = 1;
1042 if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
1045 err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
1049 err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1051 usb_kill_anchored_urbs(&data->intr_anchor);
1055 set_bit(BTUSB_BULK_RUNNING, &data->flags);
1056 btusb_submit_bulk_urb(hdev, GFP_KERNEL);
1059 if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
1060 set_bit(BTUSB_DIAG_RUNNING, &data->flags);
1064 usb_autopm_put_interface(data->intf);
1068 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1069 usb_autopm_put_interface(data->intf);
1073 static void btusb_stop_traffic(struct btusb_data *data)
1075 usb_kill_anchored_urbs(&data->intr_anchor);
1076 usb_kill_anchored_urbs(&data->bulk_anchor);
1077 usb_kill_anchored_urbs(&data->isoc_anchor);
1078 usb_kill_anchored_urbs(&data->diag_anchor);
1081 static int btusb_close(struct hci_dev *hdev)
1083 struct btusb_data *data = hci_get_drvdata(hdev);
1086 BT_DBG("%s", hdev->name);
1088 cancel_work_sync(&data->work);
1089 cancel_work_sync(&data->waker);
1091 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1092 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
1093 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
1094 clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
1096 btusb_stop_traffic(data);
1097 btusb_free_frags(data);
1099 err = usb_autopm_get_interface(data->intf);
1103 data->intf->needs_remote_wakeup = 0;
1104 usb_autopm_put_interface(data->intf);
1107 usb_scuttle_anchored_urbs(&data->deferred);
1111 static int btusb_flush(struct hci_dev *hdev)
1113 struct btusb_data *data = hci_get_drvdata(hdev);
1115 BT_DBG("%s", hdev->name);
1117 usb_kill_anchored_urbs(&data->tx_anchor);
1118 btusb_free_frags(data);
1123 static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
1125 struct btusb_data *data = hci_get_drvdata(hdev);
1126 struct usb_ctrlrequest *dr;
1130 urb = usb_alloc_urb(0, GFP_KERNEL);
1132 return ERR_PTR(-ENOMEM);
1134 dr = kmalloc(sizeof(*dr), GFP_KERNEL);
1137 return ERR_PTR(-ENOMEM);
1140 dr->bRequestType = data->cmdreq_type;
1141 dr->bRequest = data->cmdreq;
1144 dr->wLength = __cpu_to_le16(skb->len);
1146 pipe = usb_sndctrlpipe(data->udev, 0x00);
1148 usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
1149 skb->data, skb->len, btusb_tx_complete, skb);
1151 skb->dev = (void *)hdev;
1156 static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
1158 struct btusb_data *data = hci_get_drvdata(hdev);
1162 if (!data->bulk_tx_ep)
1163 return ERR_PTR(-ENODEV);
1165 urb = usb_alloc_urb(0, GFP_KERNEL);
1167 return ERR_PTR(-ENOMEM);
1169 pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
1171 usb_fill_bulk_urb(urb, data->udev, pipe,
1172 skb->data, skb->len, btusb_tx_complete, skb);
1174 skb->dev = (void *)hdev;
1179 static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
1181 struct btusb_data *data = hci_get_drvdata(hdev);
1185 if (!data->isoc_tx_ep)
1186 return ERR_PTR(-ENODEV);
1188 urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
1190 return ERR_PTR(-ENOMEM);
1192 pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
1194 usb_fill_int_urb(urb, data->udev, pipe,
1195 skb->data, skb->len, btusb_isoc_tx_complete,
1196 skb, data->isoc_tx_ep->bInterval);
1198 urb->transfer_flags = URB_ISO_ASAP;
1200 __fill_isoc_descriptor(urb, skb->len,
1201 le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
1203 skb->dev = (void *)hdev;
1208 static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
1210 struct btusb_data *data = hci_get_drvdata(hdev);
1213 usb_anchor_urb(urb, &data->tx_anchor);
1215 err = usb_submit_urb(urb, GFP_KERNEL);
1217 if (err != -EPERM && err != -ENODEV)
1218 BT_ERR("%s urb %p submission failed (%d)",
1219 hdev->name, urb, -err);
1220 kfree(urb->setup_packet);
1221 usb_unanchor_urb(urb);
1223 usb_mark_last_busy(data->udev);
1230 static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
1232 struct btusb_data *data = hci_get_drvdata(hdev);
1233 unsigned long flags;
1236 spin_lock_irqsave(&data->txlock, flags);
1237 suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
1239 data->tx_in_flight++;
1240 spin_unlock_irqrestore(&data->txlock, flags);
1243 return submit_tx_urb(hdev, urb);
1245 usb_anchor_urb(urb, &data->deferred);
1246 schedule_work(&data->waker);
1252 static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
1256 BT_DBG("%s", hdev->name);
1258 switch (bt_cb(skb)->pkt_type) {
1259 case HCI_COMMAND_PKT:
1260 urb = alloc_ctrl_urb(hdev, skb);
1262 return PTR_ERR(urb);
1264 hdev->stat.cmd_tx++;
1265 return submit_or_queue_tx_urb(hdev, urb);
1267 case HCI_ACLDATA_PKT:
1268 urb = alloc_bulk_urb(hdev, skb);
1270 return PTR_ERR(urb);
1272 hdev->stat.acl_tx++;
1273 return submit_or_queue_tx_urb(hdev, urb);
1275 case HCI_SCODATA_PKT:
1276 if (hci_conn_num(hdev, SCO_LINK) < 1)
1279 urb = alloc_isoc_urb(hdev, skb);
1281 return PTR_ERR(urb);
1283 hdev->stat.sco_tx++;
1284 return submit_tx_urb(hdev, urb);
1290 static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
1292 struct btusb_data *data = hci_get_drvdata(hdev);
1294 BT_DBG("%s evt %d", hdev->name, evt);
1296 if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
1297 data->sco_num = hci_conn_num(hdev, SCO_LINK);
1298 schedule_work(&data->work);
1302 static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
1304 struct btusb_data *data = hci_get_drvdata(hdev);
1305 struct usb_interface *intf = data->isoc;
1306 struct usb_endpoint_descriptor *ep_desc;
1312 err = usb_set_interface(data->udev, 1, altsetting);
1314 BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
1318 data->isoc_altsetting = altsetting;
1320 data->isoc_tx_ep = NULL;
1321 data->isoc_rx_ep = NULL;
1323 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
1324 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
1326 if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
1327 data->isoc_tx_ep = ep_desc;
1331 if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
1332 data->isoc_rx_ep = ep_desc;
1337 if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
1338 BT_ERR("%s invalid SCO descriptors", hdev->name);
1345 static void btusb_work(struct work_struct *work)
1347 struct btusb_data *data = container_of(work, struct btusb_data, work);
1348 struct hci_dev *hdev = data->hdev;
1352 if (data->sco_num > 0) {
1353 if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
1354 err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
1356 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1357 usb_kill_anchored_urbs(&data->isoc_anchor);
1361 set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
1364 if (hdev->voice_setting & 0x0020) {
1365 static const int alts[3] = { 2, 4, 5 };
1367 new_alts = alts[data->sco_num - 1];
1369 new_alts = data->sco_num;
1372 if (data->isoc_altsetting != new_alts) {
1373 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1374 usb_kill_anchored_urbs(&data->isoc_anchor);
1376 /* When isochronous alternate setting needs to be
1377 * changed, because SCO connection has been added
1378 * or removed, a packet fragment may be left in the
1379 * reassembling state. This could lead to wrongly
1380 * assembled fragments.
1382 * Clear outstanding fragment when selecting a new
1383 * alternate setting.
1385 spin_lock(&data->rxlock);
1386 kfree_skb(data->sco_skb);
1387 data->sco_skb = NULL;
1388 spin_unlock(&data->rxlock);
1390 if (__set_isoc_interface(hdev, new_alts) < 0)
1394 if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
1395 if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
1396 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1398 btusb_submit_isoc_urb(hdev, GFP_KERNEL);
1401 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
1402 usb_kill_anchored_urbs(&data->isoc_anchor);
1404 __set_isoc_interface(hdev, 0);
1405 if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
1406 usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
1410 static void btusb_waker(struct work_struct *work)
1412 struct btusb_data *data = container_of(work, struct btusb_data, waker);
1415 err = usb_autopm_get_interface(data->intf);
1419 usb_autopm_put_interface(data->intf);
1422 static int btusb_setup_bcm92035(struct hci_dev *hdev)
1424 struct sk_buff *skb;
1427 BT_DBG("%s", hdev->name);
1429 skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
1431 BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
1438 static int btusb_setup_csr(struct hci_dev *hdev)
1440 struct hci_rp_read_local_version *rp;
1441 struct sk_buff *skb;
1443 BT_DBG("%s", hdev->name);
1445 skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
1448 int err = PTR_ERR(skb);
1449 BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err);
1453 if (skb->len != sizeof(struct hci_rp_read_local_version)) {
1454 BT_ERR("%s: CSR: Local version length mismatch", hdev->name);
1459 rp = (struct hci_rp_read_local_version *)skb->data;
1461 /* Detect controllers which aren't real CSR ones. */
1462 if (le16_to_cpu(rp->manufacturer) != 10 ||
1463 le16_to_cpu(rp->lmp_subver) == 0x0c5c) {
1464 /* Clear the reset quirk since this is not an actual
1465 * early Bluetooth 1.1 device from CSR.
1467 clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
1469 /* These fake CSR controllers have all a broken
1470 * stored link key handling and so just disable it.
1472 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
1480 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
1481 struct intel_version *ver)
1483 const struct firmware *fw;
1487 snprintf(fwname, sizeof(fwname),
1488 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1489 ver->hw_platform, ver->hw_variant, ver->hw_revision,
1490 ver->fw_variant, ver->fw_revision, ver->fw_build_num,
1491 ver->fw_build_ww, ver->fw_build_yy);
1493 ret = request_firmware(&fw, fwname, &hdev->dev);
1495 if (ret == -EINVAL) {
1496 BT_ERR("%s Intel firmware file request failed (%d)",
1501 BT_ERR("%s failed to open Intel firmware file: %s(%d)",
1502 hdev->name, fwname, ret);
1504 /* If the correct firmware patch file is not found, use the
1505 * default firmware patch file instead
1507 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1508 ver->hw_platform, ver->hw_variant);
1509 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1510 BT_ERR("%s failed to open default Intel fw file: %s",
1511 hdev->name, fwname);
1516 BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
1521 static int btusb_setup_intel_patching(struct hci_dev *hdev,
1522 const struct firmware *fw,
1523 const u8 **fw_ptr, int *disable_patch)
1525 struct sk_buff *skb;
1526 struct hci_command_hdr *cmd;
1527 const u8 *cmd_param;
1528 struct hci_event_hdr *evt = NULL;
1529 const u8 *evt_param = NULL;
1530 int remain = fw->size - (*fw_ptr - fw->data);
1532 /* The first byte indicates the types of the patch command or event.
1533 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1534 * in the current firmware buffer doesn't start with 0x01 or
1535 * the size of remain buffer is smaller than HCI command header,
1536 * the firmware file is corrupted and it should stop the patching
1539 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1540 BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
1546 cmd = (struct hci_command_hdr *)(*fw_ptr);
1547 *fw_ptr += sizeof(*cmd);
1548 remain -= sizeof(*cmd);
1550 /* Ensure that the remain firmware data is long enough than the length
1551 * of command parameter. If not, the firmware file is corrupted.
1553 if (remain < cmd->plen) {
1554 BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
1558 /* If there is a command that loads a patch in the firmware
1559 * file, then enable the patch upon success, otherwise just
1560 * disable the manufacturer mode, for example patch activation
1561 * is not required when the default firmware patch file is used
1562 * because there are no patch data to load.
1564 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1567 cmd_param = *fw_ptr;
1568 *fw_ptr += cmd->plen;
1569 remain -= cmd->plen;
1571 /* This reads the expected events when the above command is sent to the
1572 * device. Some vendor commands expects more than one events, for
1573 * example command status event followed by vendor specific event.
1574 * For this case, it only keeps the last expected event. so the command
1575 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1576 * last expected event.
1578 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1582 evt = (struct hci_event_hdr *)(*fw_ptr);
1583 *fw_ptr += sizeof(*evt);
1584 remain -= sizeof(*evt);
1586 if (remain < evt->plen) {
1587 BT_ERR("%s Intel fw corrupted: invalid evt len",
1592 evt_param = *fw_ptr;
1593 *fw_ptr += evt->plen;
1594 remain -= evt->plen;
1597 /* Every HCI commands in the firmware file has its correspond event.
1598 * If event is not found or remain is smaller than zero, the firmware
1599 * file is corrupted.
1601 if (!evt || !evt_param || remain < 0) {
1602 BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
1606 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1607 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1609 BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
1610 hdev->name, cmd->opcode, PTR_ERR(skb));
1611 return PTR_ERR(skb);
1614 /* It ensures that the returned event matches the event data read from
1615 * the firmware file. At fist, it checks the length and then
1616 * the contents of the event.
1618 if (skb->len != evt->plen) {
1619 BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
1620 le16_to_cpu(cmd->opcode));
1625 if (memcmp(skb->data, evt_param, evt->plen)) {
1626 BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
1627 hdev->name, le16_to_cpu(cmd->opcode));
1636 static int btusb_setup_intel(struct hci_dev *hdev)
1638 struct sk_buff *skb;
1639 const struct firmware *fw;
1642 struct intel_version *ver;
1644 const u8 mfg_enable[] = { 0x01, 0x00 };
1645 const u8 mfg_disable[] = { 0x00, 0x00 };
1646 const u8 mfg_reset_deactivate[] = { 0x00, 0x01 };
1647 const u8 mfg_reset_activate[] = { 0x00, 0x02 };
1649 BT_DBG("%s", hdev->name);
1651 /* The controller has a bug with the first HCI command sent to it
1652 * returning number of completed commands as zero. This would stall the
1653 * command processing in the Bluetooth core.
1655 * As a workaround, send HCI Reset command first which will reset the
1656 * number of completed commands and allow normal command processing
1659 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
1661 BT_ERR("%s sending initial HCI reset command failed (%ld)",
1662 hdev->name, PTR_ERR(skb));
1663 return PTR_ERR(skb);
1667 /* Read Intel specific controller version first to allow selection of
1668 * which firmware file to load.
1670 * The returned information are hardware variant and revision plus
1671 * firmware variant, revision and build number.
1673 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
1675 BT_ERR("%s reading Intel fw version command failed (%ld)",
1676 hdev->name, PTR_ERR(skb));
1677 return PTR_ERR(skb);
1680 if (skb->len != sizeof(*ver)) {
1681 BT_ERR("%s Intel version event length mismatch", hdev->name);
1686 ver = (struct intel_version *)skb->data;
1688 BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
1689 hdev->name, ver->hw_platform, ver->hw_variant,
1690 ver->hw_revision, ver->fw_variant, ver->fw_revision,
1691 ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
1694 /* fw_patch_num indicates the version of patch the device currently
1695 * have. If there is no patch data in the device, it is always 0x00.
1696 * So, if it is other than 0x00, no need to patch the device again.
1698 if (ver->fw_patch_num) {
1699 BT_INFO("%s: Intel device is already patched. patch num: %02x",
1700 hdev->name, ver->fw_patch_num);
1702 btintel_check_bdaddr(hdev);
1706 /* Opens the firmware patch file based on the firmware version read
1707 * from the controller. If it fails to open the matching firmware
1708 * patch file, it tries to open the default firmware patch file.
1709 * If no patch file is found, allow the device to operate without
1712 fw = btusb_setup_intel_get_fw(hdev, ver);
1715 btintel_check_bdaddr(hdev);
1722 /* This Intel specific command enables the manufacturer mode of the
1725 * Only while this mode is enabled, the driver can download the
1726 * firmware patch data and configuration parameters.
1728 skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT);
1730 BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
1731 hdev->name, PTR_ERR(skb));
1732 release_firmware(fw);
1733 return PTR_ERR(skb);
1740 /* The firmware data file consists of list of Intel specific HCI
1741 * commands and its expected events. The first byte indicates the
1742 * type of the message, either HCI command or HCI event.
1744 * It reads the command and its expected event from the firmware file,
1745 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1746 * the returned event is compared with the event read from the firmware
1747 * file and it will continue until all the messages are downloaded to
1750 * Once the firmware patching is completed successfully,
1751 * the manufacturer mode is disabled with reset and activating the
1754 * If the firmware patching fails, the manufacturer mode is
1755 * disabled with reset and deactivating the patch.
1757 * If the default patch file is used, no reset is done when disabling
1760 while (fw->size > fw_ptr - fw->data) {
1763 ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
1766 goto exit_mfg_deactivate;
1769 release_firmware(fw);
1772 goto exit_mfg_disable;
1774 /* Patching completed successfully and disable the manufacturer mode
1775 * with reset and activate the downloaded firmware patches.
1777 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate),
1778 mfg_reset_activate, HCI_INIT_TIMEOUT);
1780 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1781 hdev->name, PTR_ERR(skb));
1782 return PTR_ERR(skb);
1786 BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
1789 btintel_check_bdaddr(hdev);
1793 /* Disable the manufacturer mode without reset */
1794 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable,
1797 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1798 hdev->name, PTR_ERR(skb));
1799 return PTR_ERR(skb);
1803 BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
1805 btintel_check_bdaddr(hdev);
1808 exit_mfg_deactivate:
1809 release_firmware(fw);
1811 /* Patching failed. Disable the manufacturer mode with reset and
1812 * deactivate the downloaded firmware patches.
1814 skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate),
1815 mfg_reset_deactivate, HCI_INIT_TIMEOUT);
1817 BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
1818 hdev->name, PTR_ERR(skb));
1819 return PTR_ERR(skb);
1823 BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
1826 btintel_check_bdaddr(hdev);
1830 static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
1832 struct sk_buff *skb;
1833 struct hci_event_hdr *hdr;
1834 struct hci_ev_cmd_complete *evt;
1836 skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
1840 hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
1841 hdr->evt = HCI_EV_CMD_COMPLETE;
1842 hdr->plen = sizeof(*evt) + 1;
1844 evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
1846 evt->opcode = cpu_to_le16(opcode);
1848 *skb_put(skb, 1) = 0x00;
1850 bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
1852 return hci_recv_frame(hdev, skb);
1855 static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
1858 /* When the device is in bootloader mode, then it can send
1859 * events via the bulk endpoint. These events are treated the
1860 * same way as the ones received from the interrupt endpoint.
1862 if (test_bit(BTUSB_BOOTLOADER, &data->flags))
1863 return btusb_recv_intr(data, buffer, count);
1865 return btusb_recv_bulk(data, buffer, count);
1868 static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
1871 const struct intel_bootup *evt = ptr;
1873 if (len != sizeof(*evt))
1876 if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
1877 smp_mb__after_atomic();
1878 wake_up_bit(&data->flags, BTUSB_BOOTING);
1882 static void btusb_intel_secure_send_result(struct btusb_data *data,
1883 const void *ptr, unsigned int len)
1885 const struct intel_secure_send_result *evt = ptr;
1887 if (len != sizeof(*evt))
1891 set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
1893 if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
1894 test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
1895 smp_mb__after_atomic();
1896 wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
1900 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
1902 struct btusb_data *data = hci_get_drvdata(hdev);
1904 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1905 struct hci_event_hdr *hdr = (void *)skb->data;
1907 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
1909 const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
1910 unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
1912 switch (skb->data[2]) {
1914 /* When switching to the operational firmware
1915 * the device sends a vendor specific event
1916 * indicating that the bootup completed.
1918 btusb_intel_bootup(data, ptr, len);
1921 /* When the firmware loading completes the
1922 * device sends out a vendor specific event
1923 * indicating the result of the firmware
1926 btusb_intel_secure_send_result(data, ptr, len);
1932 return hci_recv_frame(hdev, skb);
1935 static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
1937 struct btusb_data *data = hci_get_drvdata(hdev);
1940 BT_DBG("%s", hdev->name);
1942 switch (bt_cb(skb)->pkt_type) {
1943 case HCI_COMMAND_PKT:
1944 if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
1945 struct hci_command_hdr *cmd = (void *)skb->data;
1946 __u16 opcode = le16_to_cpu(cmd->opcode);
1948 /* When in bootloader mode and the command 0xfc09
1949 * is received, it needs to be send down the
1950 * bulk endpoint. So allocate a bulk URB instead.
1952 if (opcode == 0xfc09)
1953 urb = alloc_bulk_urb(hdev, skb);
1955 urb = alloc_ctrl_urb(hdev, skb);
1957 /* When the 0xfc01 command is issued to boot into
1958 * the operational firmware, it will actually not
1959 * send a command complete event. To keep the flow
1960 * control working inject that event here.
1962 if (opcode == 0xfc01)
1963 inject_cmd_complete(hdev, opcode);
1965 urb = alloc_ctrl_urb(hdev, skb);
1968 return PTR_ERR(urb);
1970 hdev->stat.cmd_tx++;
1971 return submit_or_queue_tx_urb(hdev, urb);
1973 case HCI_ACLDATA_PKT:
1974 urb = alloc_bulk_urb(hdev, skb);
1976 return PTR_ERR(urb);
1978 hdev->stat.acl_tx++;
1979 return submit_or_queue_tx_urb(hdev, urb);
1981 case HCI_SCODATA_PKT:
1982 if (hci_conn_num(hdev, SCO_LINK) < 1)
1985 urb = alloc_isoc_urb(hdev, skb);
1987 return PTR_ERR(urb);
1989 hdev->stat.sco_tx++;
1990 return submit_tx_urb(hdev, urb);
1996 static int btusb_setup_intel_new(struct hci_dev *hdev)
1998 static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
1999 0x00, 0x08, 0x04, 0x00 };
2000 struct btusb_data *data = hci_get_drvdata(hdev);
2001 struct sk_buff *skb;
2002 struct intel_version *ver;
2003 struct intel_boot_params *params;
2004 const struct firmware *fw;
2008 ktime_t calltime, delta, rettime;
2009 unsigned long long duration;
2012 BT_DBG("%s", hdev->name);
2014 calltime = ktime_get();
2016 /* Read the Intel version information to determine if the device
2017 * is in bootloader mode or if it already has operational firmware
2020 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
2022 BT_ERR("%s: Reading Intel version information failed (%ld)",
2023 hdev->name, PTR_ERR(skb));
2024 return PTR_ERR(skb);
2027 if (skb->len != sizeof(*ver)) {
2028 BT_ERR("%s: Intel version event size mismatch", hdev->name);
2033 ver = (struct intel_version *)skb->data;
2035 /* The hardware platform number has a fixed value of 0x37 and
2036 * for now only accept this single value.
2038 if (ver->hw_platform != 0x37) {
2039 BT_ERR("%s: Unsupported Intel hardware platform (%u)",
2040 hdev->name, ver->hw_platform);
2045 /* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
2046 * supported by this firmware loading method. This check has been
2047 * put in place to ensure correct forward compatibility options
2048 * when newer hardware variants come along.
2050 if (ver->hw_variant != 0x0b) {
2051 BT_ERR("%s: Unsupported Intel hardware variant (%u)",
2052 hdev->name, ver->hw_variant);
2057 btintel_version_info(hdev, ver);
2059 /* The firmware variant determines if the device is in bootloader
2060 * mode or is running operational firmware. The value 0x06 identifies
2061 * the bootloader and the value 0x23 identifies the operational
2064 * When the operational firmware is already present, then only
2065 * the check for valid Bluetooth device address is needed. This
2066 * determines if the device will be added as configured or
2067 * unconfigured controller.
2069 * It is not possible to use the Secure Boot Parameters in this
2070 * case since that command is only available in bootloader mode.
2072 if (ver->fw_variant == 0x23) {
2074 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2075 btintel_check_bdaddr(hdev);
2079 /* If the device is not in bootloader mode, then the only possible
2080 * choice is to return an error and abort the device initialization.
2082 if (ver->fw_variant != 0x06) {
2083 BT_ERR("%s: Unsupported Intel firmware variant (%u)",
2084 hdev->name, ver->fw_variant);
2091 /* Read the secure boot parameters to identify the operating
2092 * details of the bootloader.
2094 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
2096 BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
2097 hdev->name, PTR_ERR(skb));
2098 return PTR_ERR(skb);
2101 if (skb->len != sizeof(*params)) {
2102 BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
2107 params = (struct intel_boot_params *)skb->data;
2109 BT_INFO("%s: Device revision is %u", hdev->name,
2110 le16_to_cpu(params->dev_revid));
2112 BT_INFO("%s: Secure boot is %s", hdev->name,
2113 params->secure_boot ? "enabled" : "disabled");
2115 BT_INFO("%s: OTP lock is %s", hdev->name,
2116 params->otp_lock ? "enabled" : "disabled");
2118 BT_INFO("%s: API lock is %s", hdev->name,
2119 params->api_lock ? "enabled" : "disabled");
2121 BT_INFO("%s: Debug lock is %s", hdev->name,
2122 params->debug_lock ? "enabled" : "disabled");
2124 BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
2125 params->min_fw_build_nn, params->min_fw_build_cw,
2126 2000 + params->min_fw_build_yy);
2128 /* It is required that every single firmware fragment is acknowledged
2129 * with a command complete event. If the boot parameters indicate
2130 * that this bootloader does not send them, then abort the setup.
2132 if (params->limited_cce != 0x00) {
2133 BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
2134 hdev->name, params->limited_cce);
2139 /* If the OTP has no valid Bluetooth device address, then there will
2140 * also be no valid address for the operational firmware.
2142 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
2143 BT_INFO("%s: No device address configured", hdev->name);
2144 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2147 /* With this Intel bootloader only the hardware variant and device
2148 * revision information are used to select the right firmware.
2150 * Currently this bootloader support is limited to hardware variant
2151 * iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
2153 snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
2154 le16_to_cpu(params->dev_revid));
2156 err = request_firmware(&fw, fwname, &hdev->dev);
2158 BT_ERR("%s: Failed to load Intel firmware file (%d)",
2164 BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
2166 /* Save the DDC file name for later use to apply once the firmware
2167 * downloading is done.
2169 snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
2170 le16_to_cpu(params->dev_revid));
2174 if (fw->size < 644) {
2175 BT_ERR("%s: Invalid size of firmware file (%zu)",
2176 hdev->name, fw->size);
2181 set_bit(BTUSB_DOWNLOADING, &data->flags);
2183 /* Start the firmware download transaction with the Init fragment
2184 * represented by the 128 bytes of CSS header.
2186 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
2188 BT_ERR("%s: Failed to send firmware header (%d)",
2193 /* Send the 256 bytes of public key information from the firmware
2194 * as the PKey fragment.
2196 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
2198 BT_ERR("%s: Failed to send firmware public key (%d)",
2203 /* Send the 256 bytes of signature information from the firmware
2204 * as the Sign fragment.
2206 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
2208 BT_ERR("%s: Failed to send firmware signature (%d)",
2213 fw_ptr = fw->data + 644;
2216 while (fw_ptr - fw->data < fw->size) {
2217 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
2219 frag_len += sizeof(*cmd) + cmd->plen;
2221 /* The parameter length of the secure send command requires
2222 * a 4 byte alignment. It happens so that the firmware file
2223 * contains proper Intel_NOP commands to align the fragments
2226 * Send set of commands with 4 byte alignment from the
2227 * firmware data buffer as a single Data fragement.
2229 if (!(frag_len % 4)) {
2230 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
2232 BT_ERR("%s: Failed to send firmware data (%d)",
2242 set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
2244 BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
2246 /* Before switching the device into operational mode and with that
2247 * booting the loaded firmware, wait for the bootloader notification
2248 * that all fragments have been successfully received.
2250 * When the event processing receives the notification, then the
2251 * BTUSB_DOWNLOADING flag will be cleared.
2253 * The firmware loading should not take longer than 5 seconds
2254 * and thus just timeout if that happens and fail the setup
2257 err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
2259 msecs_to_jiffies(5000));
2261 BT_ERR("%s: Firmware loading interrupted", hdev->name);
2267 BT_ERR("%s: Firmware loading timeout", hdev->name);
2272 if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
2273 BT_ERR("%s: Firmware loading failed", hdev->name);
2278 rettime = ktime_get();
2279 delta = ktime_sub(rettime, calltime);
2280 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2282 BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
2285 release_firmware(fw);
2290 calltime = ktime_get();
2292 set_bit(BTUSB_BOOTING, &data->flags);
2294 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
2297 return PTR_ERR(skb);
2301 /* The bootloader will not indicate when the device is ready. This
2302 * is done by the operational firmware sending bootup notification.
2304 * Booting into operational firmware should not take longer than
2305 * 1 second. However if that happens, then just fail the setup
2306 * since something went wrong.
2308 BT_INFO("%s: Waiting for device to boot", hdev->name);
2310 err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
2312 msecs_to_jiffies(1000));
2315 BT_ERR("%s: Device boot interrupted", hdev->name);
2320 BT_ERR("%s: Device boot timeout", hdev->name);
2324 rettime = ktime_get();
2325 delta = ktime_sub(rettime, calltime);
2326 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
2328 BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
2330 clear_bit(BTUSB_BOOTLOADER, &data->flags);
2332 /* Once the device is running in operational mode, it needs to apply
2333 * the device configuration (DDC) parameters.
2335 * The device can work without DDC parameters, so even if it fails
2336 * to load the file, no need to fail the setup.
2338 btintel_load_ddc_config(hdev, fwname);
2343 static int btusb_shutdown_intel(struct hci_dev *hdev)
2345 struct sk_buff *skb;
2348 /* Some platforms have an issue with BT LED when the interface is
2349 * down or BT radio is turned off, which takes 5 seconds to BT LED
2350 * goes off. This command turns off the BT LED immediately.
2352 skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
2355 BT_ERR("%s: turning off Intel device LED failed (%ld)",
2364 static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
2365 const bdaddr_t *bdaddr)
2367 struct sk_buff *skb;
2372 buf[1] = sizeof(bdaddr_t);
2373 memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
2375 skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2378 BT_ERR("%s: changing Marvell device address failed (%ld)",
2387 static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
2388 const bdaddr_t *bdaddr)
2390 struct sk_buff *skb;
2397 buf[3] = sizeof(bdaddr_t);
2398 memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
2400 skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
2403 BT_ERR("%s: Change address command failed (%ld)",
2412 #define QCA_DFU_PACKET_LEN 4096
2414 #define QCA_GET_TARGET_VERSION 0x09
2415 #define QCA_CHECK_STATUS 0x05
2416 #define QCA_DFU_DOWNLOAD 0x01
2418 #define QCA_SYSCFG_UPDATED 0x40
2419 #define QCA_PATCH_UPDATED 0x80
2420 #define QCA_DFU_TIMEOUT 3000
2422 struct qca_version {
2424 __le32 patch_version;
2430 struct qca_rampatch_version {
2432 __le16 patch_version;
2435 struct qca_device_info {
2437 u8 rampatch_hdr; /* length of header in rampatch */
2438 u8 nvm_hdr; /* length of header in NVM */
2439 u8 ver_offset; /* offset of version structure in rampatch */
2442 static const struct qca_device_info qca_devices_table[] = {
2443 { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
2444 { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
2445 { 0x00000200, 28, 4, 18 }, /* Rome 2.0 */
2446 { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
2447 { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
2448 { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
2451 static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
2452 void *data, u16 size)
2454 struct btusb_data *btdata = hci_get_drvdata(hdev);
2455 struct usb_device *udev = btdata->udev;
2459 buf = kmalloc(size, GFP_KERNEL);
2463 /* Found some of USB hosts have IOT issues with ours so that we should
2464 * not wait until HCI layer is ready.
2466 pipe = usb_rcvctrlpipe(udev, 0);
2467 err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
2468 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2470 BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
2474 memcpy(data, buf, size);
2482 static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
2483 const struct firmware *firmware,
2486 struct btusb_data *btdata = hci_get_drvdata(hdev);
2487 struct usb_device *udev = btdata->udev;
2488 size_t count, size, sent = 0;
2492 buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
2496 count = firmware->size;
2498 size = min_t(size_t, count, hdr_size);
2499 memcpy(buf, firmware->data, size);
2501 /* USB patches should go down to controller through USB path
2502 * because binary format fits to go down through USB channel.
2503 * USB control path is for patching headers and USB bulk is for
2506 pipe = usb_sndctrlpipe(udev, 0);
2507 err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
2508 0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
2510 BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
2518 size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
2520 memcpy(buf, firmware->data + sent, size);
2522 pipe = usb_sndbulkpipe(udev, 0x02);
2523 err = usb_bulk_msg(udev, pipe, buf, size, &len,
2526 BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
2527 hdev->name, sent, firmware->size, err);
2532 BT_ERR("%s: Failed to get bulk buffer", hdev->name);
2546 static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
2547 struct qca_version *ver,
2548 const struct qca_device_info *info)
2550 struct qca_rampatch_version *rver;
2551 const struct firmware *fw;
2552 u32 ver_rom, ver_patch;
2553 u16 rver_rom, rver_patch;
2557 ver_rom = le32_to_cpu(ver->rom_version);
2558 ver_patch = le32_to_cpu(ver->patch_version);
2560 snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
2562 err = request_firmware(&fw, fwname, &hdev->dev);
2564 BT_ERR("%s: failed to request rampatch file: %s (%d)",
2565 hdev->name, fwname, err);
2569 BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);
2571 rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
2572 rver_rom = le16_to_cpu(rver->rom_version);
2573 rver_patch = le16_to_cpu(rver->patch_version);
2575 BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
2576 "build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom,
2579 if (rver_rom != ver_rom || rver_patch <= ver_patch) {
2580 BT_ERR("%s: rampatch file version did not match with firmware",
2586 err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
2589 release_firmware(fw);
2594 static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
2595 struct qca_version *ver,
2596 const struct qca_device_info *info)
2598 const struct firmware *fw;
2602 snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
2603 le32_to_cpu(ver->rom_version));
2605 err = request_firmware(&fw, fwname, &hdev->dev);
2607 BT_ERR("%s: failed to request NVM file: %s (%d)",
2608 hdev->name, fwname, err);
2612 BT_INFO("%s: using NVM file: %s", hdev->name, fwname);
2614 err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
2616 release_firmware(fw);
2621 static int btusb_setup_qca(struct hci_dev *hdev)
2623 const struct qca_device_info *info = NULL;
2624 struct qca_version ver;
2629 err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
2634 ver_rom = le32_to_cpu(ver.rom_version);
2635 for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
2636 if (ver_rom == qca_devices_table[i].rom_version)
2637 info = &qca_devices_table[i];
2640 BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
2645 err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
2650 if (!(status & QCA_PATCH_UPDATED)) {
2651 err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
2656 if (!(status & QCA_SYSCFG_UPDATED)) {
2657 err = btusb_setup_qca_load_nvm(hdev, &ver, info);
2665 #ifdef CONFIG_BT_HCIBTUSB_BCM
2666 static inline int __set_diag_interface(struct hci_dev *hdev)
2668 struct btusb_data *data = hci_get_drvdata(hdev);
2669 struct usb_interface *intf = data->diag;
2675 data->diag_tx_ep = NULL;
2676 data->diag_rx_ep = NULL;
2678 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2679 struct usb_endpoint_descriptor *ep_desc;
2681 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2683 if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2684 data->diag_tx_ep = ep_desc;
2688 if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2689 data->diag_rx_ep = ep_desc;
2694 if (!data->diag_tx_ep || !data->diag_rx_ep) {
2695 BT_ERR("%s invalid diagnostic descriptors", hdev->name);
2702 static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
2704 struct btusb_data *data = hci_get_drvdata(hdev);
2705 struct sk_buff *skb;
2709 if (!data->diag_tx_ep)
2710 return ERR_PTR(-ENODEV);
2712 urb = usb_alloc_urb(0, GFP_KERNEL);
2714 return ERR_PTR(-ENOMEM);
2716 skb = bt_skb_alloc(2, GFP_KERNEL);
2719 return ERR_PTR(-ENOMEM);
2722 *skb_put(skb, 1) = 0xf0;
2723 *skb_put(skb, 1) = enable;
2725 pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
2727 usb_fill_bulk_urb(urb, data->udev, pipe,
2728 skb->data, skb->len, btusb_tx_complete, skb);
2730 skb->dev = (void *)hdev;
2735 static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
2737 struct btusb_data *data = hci_get_drvdata(hdev);
2743 if (!test_bit(HCI_RUNNING, &hdev->flags))
2746 urb = alloc_diag_urb(hdev, enable);
2748 return PTR_ERR(urb);
2750 return submit_or_queue_tx_urb(hdev, urb);
2754 static int btusb_probe(struct usb_interface *intf,
2755 const struct usb_device_id *id)
2757 struct usb_endpoint_descriptor *ep_desc;
2758 struct btusb_data *data;
2759 struct hci_dev *hdev;
2762 BT_DBG("intf %p id %p", intf, id);
2764 /* interface numbers are hardcoded in the spec */
2765 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
2768 if (!id->driver_info) {
2769 const struct usb_device_id *match;
2771 match = usb_match_id(intf, blacklist_table);
2776 if (id->driver_info == BTUSB_IGNORE)
2779 if (id->driver_info & BTUSB_ATH3012) {
2780 struct usb_device *udev = interface_to_usbdev(intf);
2782 /* Old firmware would otherwise let ath3k driver load
2783 * patch and sysconfig files */
2784 if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
2788 data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
2792 for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
2793 ep_desc = &intf->cur_altsetting->endpoint[i].desc;
2795 if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
2796 data->intr_ep = ep_desc;
2800 if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
2801 data->bulk_tx_ep = ep_desc;
2805 if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
2806 data->bulk_rx_ep = ep_desc;
2811 if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
2814 if (id->driver_info & BTUSB_AMP) {
2815 data->cmdreq_type = USB_TYPE_CLASS | 0x01;
2816 data->cmdreq = 0x2b;
2818 data->cmdreq_type = USB_TYPE_CLASS;
2819 data->cmdreq = 0x00;
2822 data->udev = interface_to_usbdev(intf);
2825 INIT_WORK(&data->work, btusb_work);
2826 INIT_WORK(&data->waker, btusb_waker);
2827 init_usb_anchor(&data->deferred);
2828 init_usb_anchor(&data->tx_anchor);
2829 spin_lock_init(&data->txlock);
2831 init_usb_anchor(&data->intr_anchor);
2832 init_usb_anchor(&data->bulk_anchor);
2833 init_usb_anchor(&data->isoc_anchor);
2834 init_usb_anchor(&data->diag_anchor);
2835 spin_lock_init(&data->rxlock);
2837 if (id->driver_info & BTUSB_INTEL_NEW) {
2838 data->recv_event = btusb_recv_event_intel;
2839 data->recv_bulk = btusb_recv_bulk_intel;
2840 set_bit(BTUSB_BOOTLOADER, &data->flags);
2842 data->recv_event = hci_recv_frame;
2843 data->recv_bulk = btusb_recv_bulk;
2846 hdev = hci_alloc_dev();
2850 hdev->bus = HCI_USB;
2851 hci_set_drvdata(hdev, data);
2853 if (id->driver_info & BTUSB_AMP)
2854 hdev->dev_type = HCI_AMP;
2856 hdev->dev_type = HCI_BREDR;
2860 SET_HCIDEV_DEV(hdev, &intf->dev);
2862 hdev->open = btusb_open;
2863 hdev->close = btusb_close;
2864 hdev->flush = btusb_flush;
2865 hdev->send = btusb_send_frame;
2866 hdev->notify = btusb_notify;
2868 if (id->driver_info & BTUSB_BCM2045)
2869 set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
2871 if (id->driver_info & BTUSB_BCM92035)
2872 hdev->setup = btusb_setup_bcm92035;
2874 #ifdef CONFIG_BT_HCIBTUSB_BCM
2875 if (id->driver_info & BTUSB_BCM_PATCHRAM) {
2876 hdev->setup = btbcm_setup_patchram;
2877 hdev->set_diag = btusb_bcm_set_diag;
2878 hdev->set_bdaddr = btbcm_set_bdaddr;
2880 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2881 data->diag = usb_ifnum_to_if(data->udev, 2);
2884 if (id->driver_info & BTUSB_BCM_APPLE) {
2885 hdev->setup = btbcm_setup_apple;
2886 hdev->set_diag = btusb_bcm_set_diag;
2888 /* Broadcom LM_DIAG Interface numbers are hardcoded */
2889 data->diag = usb_ifnum_to_if(data->udev, 2);
2893 if (id->driver_info & BTUSB_INTEL) {
2894 hdev->setup = btusb_setup_intel;
2895 hdev->shutdown = btusb_shutdown_intel;
2896 hdev->set_diag = btintel_set_diag_mfg;
2897 hdev->set_bdaddr = btintel_set_bdaddr;
2898 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2899 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2900 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2903 if (id->driver_info & BTUSB_INTEL_NEW) {
2904 hdev->send = btusb_send_frame_intel;
2905 hdev->setup = btusb_setup_intel_new;
2906 hdev->hw_error = btintel_hw_error;
2907 hdev->set_diag = btintel_set_diag;
2908 hdev->set_bdaddr = btintel_set_bdaddr;
2909 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2910 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2913 if (id->driver_info & BTUSB_MARVELL)
2914 hdev->set_bdaddr = btusb_set_bdaddr_marvell;
2916 if (id->driver_info & BTUSB_SWAVE) {
2917 set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
2918 set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
2921 if (id->driver_info & BTUSB_INTEL_BOOT)
2922 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
2924 if (id->driver_info & BTUSB_ATH3012) {
2925 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
2926 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2927 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2930 if (id->driver_info & BTUSB_QCA_ROME) {
2931 data->setup_on_usb = btusb_setup_qca;
2932 hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
2935 #ifdef CONFIG_BT_HCIBTUSB_RTL
2936 if (id->driver_info & BTUSB_REALTEK) {
2937 hdev->setup = btrtl_setup_realtek;
2939 /* Realtek devices lose their updated firmware over suspend,
2940 * but the USB hub doesn't notice any status change.
2941 * Explicitly request a device reset on resume.
2943 set_bit(BTUSB_RESET_RESUME, &data->flags);
2947 if (id->driver_info & BTUSB_AMP) {
2948 /* AMP controllers do not support SCO packets */
2951 /* Interface numbers are hardcoded in the specification */
2952 data->isoc = usb_ifnum_to_if(data->udev, 1);
2956 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2958 if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
2959 if (!disable_scofix)
2960 set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
2963 if (id->driver_info & BTUSB_BROKEN_ISOC)
2966 if (id->driver_info & BTUSB_DIGIANSWER) {
2967 data->cmdreq_type = USB_TYPE_VENDOR;
2968 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2971 if (id->driver_info & BTUSB_CSR) {
2972 struct usb_device *udev = data->udev;
2973 u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
2975 /* Old firmware would otherwise execute USB reset */
2976 if (bcdDevice < 0x117)
2977 set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
2979 /* Fake CSR devices with broken commands */
2980 if (bcdDevice <= 0x100 || bcdDevice == 0x134)
2981 hdev->setup = btusb_setup_csr;
2983 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2986 if (id->driver_info & BTUSB_SNIFFER) {
2987 struct usb_device *udev = data->udev;
2989 /* New sniffer firmware has crippled HCI interface */
2990 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
2991 set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
2994 if (id->driver_info & BTUSB_INTEL_BOOT) {
2995 /* A bug in the bootloader causes that interrupt interface is
2996 * only enabled after receiving SetInterface(0, AltSetting=0).
2998 err = usb_set_interface(data->udev, 0, 0);
3000 BT_ERR("failed to set interface 0, alt 0 %d", err);
3007 err = usb_driver_claim_interface(&btusb_driver,
3015 #ifdef CONFIG_BT_HCIBTUSB_BCM
3017 if (!usb_driver_claim_interface(&btusb_driver,
3019 __set_diag_interface(hdev);
3025 err = hci_register_dev(hdev);
3031 usb_set_intfdata(intf, data);
3036 static void btusb_disconnect(struct usb_interface *intf)
3038 struct btusb_data *data = usb_get_intfdata(intf);
3039 struct hci_dev *hdev;
3041 BT_DBG("intf %p", intf);
3047 usb_set_intfdata(data->intf, NULL);
3050 usb_set_intfdata(data->isoc, NULL);
3053 usb_set_intfdata(data->diag, NULL);
3055 hci_unregister_dev(hdev);
3057 if (intf == data->intf) {
3059 usb_driver_release_interface(&btusb_driver, data->isoc);
3061 usb_driver_release_interface(&btusb_driver, data->diag);
3062 } else if (intf == data->isoc) {
3064 usb_driver_release_interface(&btusb_driver, data->diag);
3065 usb_driver_release_interface(&btusb_driver, data->intf);
3066 } else if (intf == data->diag) {
3067 usb_driver_release_interface(&btusb_driver, data->intf);
3069 usb_driver_release_interface(&btusb_driver, data->isoc);
3076 static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
3078 struct btusb_data *data = usb_get_intfdata(intf);
3080 BT_DBG("intf %p", intf);
3082 if (data->suspend_count++)
3085 spin_lock_irq(&data->txlock);
3086 if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
3087 set_bit(BTUSB_SUSPENDING, &data->flags);
3088 spin_unlock_irq(&data->txlock);
3090 spin_unlock_irq(&data->txlock);
3091 data->suspend_count--;
3095 cancel_work_sync(&data->work);
3097 btusb_stop_traffic(data);
3098 usb_kill_anchored_urbs(&data->tx_anchor);
3100 /* Optionally request a device reset on resume, but only when
3101 * wakeups are disabled. If wakeups are enabled we assume the
3102 * device will stay powered up throughout suspend.
3104 if (test_bit(BTUSB_RESET_RESUME, &data->flags) &&
3105 !device_may_wakeup(&data->udev->dev))
3106 data->udev->reset_resume = 1;
3111 static void play_deferred(struct btusb_data *data)
3116 while ((urb = usb_get_from_anchor(&data->deferred))) {
3117 err = usb_submit_urb(urb, GFP_ATOMIC);
3121 data->tx_in_flight++;
3123 usb_scuttle_anchored_urbs(&data->deferred);
3126 static int btusb_resume(struct usb_interface *intf)
3128 struct btusb_data *data = usb_get_intfdata(intf);
3129 struct hci_dev *hdev = data->hdev;
3132 BT_DBG("intf %p", intf);
3134 if (--data->suspend_count)
3137 if (!test_bit(HCI_RUNNING, &hdev->flags))
3140 if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
3141 err = btusb_submit_intr_urb(hdev, GFP_NOIO);
3143 clear_bit(BTUSB_INTR_RUNNING, &data->flags);
3148 if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
3149 err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
3151 clear_bit(BTUSB_BULK_RUNNING, &data->flags);
3155 btusb_submit_bulk_urb(hdev, GFP_NOIO);
3158 if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
3159 if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
3160 clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
3162 btusb_submit_isoc_urb(hdev, GFP_NOIO);
3165 spin_lock_irq(&data->txlock);
3166 play_deferred(data);
3167 clear_bit(BTUSB_SUSPENDING, &data->flags);
3168 spin_unlock_irq(&data->txlock);
3169 schedule_work(&data->work);
3174 usb_scuttle_anchored_urbs(&data->deferred);
3176 spin_lock_irq(&data->txlock);
3177 clear_bit(BTUSB_SUSPENDING, &data->flags);
3178 spin_unlock_irq(&data->txlock);
3184 static struct usb_driver btusb_driver = {
3186 .probe = btusb_probe,
3187 .disconnect = btusb_disconnect,
3189 .suspend = btusb_suspend,
3190 .resume = btusb_resume,
3192 .id_table = btusb_table,
3193 .supports_autosuspend = 1,
3194 .disable_hub_initiated_lpm = 1,
3197 module_usb_driver(btusb_driver);
3199 module_param(disable_scofix, bool, 0644);
3200 MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
3202 module_param(force_scofix, bool, 0644);
3203 MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
3205 module_param(reset, bool, 0644);
3206 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
3208 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3209 MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
3210 MODULE_VERSION(VERSION);
3211 MODULE_LICENSE("GPL");