]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - drivers/net/ethernet/mellanox/mlxsw/pci.h
xfrm: dst_entries_init() per-net dst_ops
[karo-tx-linux.git] / drivers / net / ethernet / mellanox / mlxsw / pci.h
1 /*
2  * drivers/net/ethernet/mellanox/mlxsw/pci.h
3  * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
4  * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. Neither the names of the copyright holders nor the names of its
15  *    contributors may be used to endorse or promote products derived from
16  *    this software without specific prior written permission.
17  *
18  * Alternatively, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") version 2 as published by the Free
20  * Software Foundation.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
23  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
26  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32  * POSSIBILITY OF SUCH DAMAGE.
33  */
34
35 #ifndef _MLXSW_PCI_H
36 #define _MLXSW_PCI_H
37
38 #include <linux/bitops.h>
39
40 #include "item.h"
41
42 #define PCI_DEVICE_ID_MELLANOX_SWITCHX2 0xc738
43 #define MLXSW_PCI_BAR0_SIZE             (1024 * 1024) /* 1MB */
44 #define MLXSW_PCI_PAGE_SIZE             4096
45
46 #define MLXSW_PCI_CIR_BASE                      0x71000
47 #define MLXSW_PCI_CIR_IN_PARAM_HI               MLXSW_PCI_CIR_BASE
48 #define MLXSW_PCI_CIR_IN_PARAM_LO               (MLXSW_PCI_CIR_BASE + 0x04)
49 #define MLXSW_PCI_CIR_IN_MODIFIER               (MLXSW_PCI_CIR_BASE + 0x08)
50 #define MLXSW_PCI_CIR_OUT_PARAM_HI              (MLXSW_PCI_CIR_BASE + 0x0C)
51 #define MLXSW_PCI_CIR_OUT_PARAM_LO              (MLXSW_PCI_CIR_BASE + 0x10)
52 #define MLXSW_PCI_CIR_TOKEN                     (MLXSW_PCI_CIR_BASE + 0x14)
53 #define MLXSW_PCI_CIR_CTRL                      (MLXSW_PCI_CIR_BASE + 0x18)
54 #define MLXSW_PCI_CIR_CTRL_GO_BIT               BIT(23)
55 #define MLXSW_PCI_CIR_CTRL_EVREQ_BIT            BIT(22)
56 #define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT     12
57 #define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT         24
58 #define MLXSW_PCI_CIR_TIMEOUT_MSECS             1000
59
60 #define MLXSW_PCI_SW_RESET                      0xF0010
61 #define MLXSW_PCI_SW_RESET_RST_BIT              BIT(0)
62 #define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS        5000
63
64 #define MLXSW_PCI_DOORBELL_SDQ_OFFSET           0x000
65 #define MLXSW_PCI_DOORBELL_RDQ_OFFSET           0x200
66 #define MLXSW_PCI_DOORBELL_CQ_OFFSET            0x400
67 #define MLXSW_PCI_DOORBELL_EQ_OFFSET            0x600
68 #define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET        0x800
69 #define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET        0xA00
70
71 #define MLXSW_PCI_DOORBELL(offset, type_offset, num)    \
72         ((offset) + (type_offset) + (num) * 4)
73
74 #define MLXSW_PCI_RDQS_COUNT    24
75 #define MLXSW_PCI_SDQS_COUNT    24
76 #define MLXSW_PCI_CQS_COUNT     (MLXSW_PCI_RDQS_COUNT + MLXSW_PCI_SDQS_COUNT)
77 #define MLXSW_PCI_EQS_COUNT     2
78 #define MLXSW_PCI_EQ_ASYNC_NUM  0
79 #define MLXSW_PCI_EQ_COMP_NUM   1
80
81 #define MLXSW_PCI_AQ_PAGES      8
82 #define MLXSW_PCI_AQ_SIZE       (MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
83 #define MLXSW_PCI_WQE_SIZE      32 /* 32 bytes per element */
84 #define MLXSW_PCI_CQE_SIZE      16 /* 16 bytes per element */
85 #define MLXSW_PCI_EQE_SIZE      16 /* 16 bytes per element */
86 #define MLXSW_PCI_WQE_COUNT     (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
87 #define MLXSW_PCI_CQE_COUNT     (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE)
88 #define MLXSW_PCI_EQE_COUNT     (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
89 #define MLXSW_PCI_EQE_UPDATE_COUNT      0x80
90
91 #define MLXSW_PCI_WQE_SG_ENTRIES        3
92 #define MLXSW_PCI_WQE_TYPE_ETHERNET     0xA
93
94 /* pci_wqe_c
95  * If set it indicates that a completion should be reported upon
96  * execution of this descriptor.
97  */
98 MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
99
100 /* pci_wqe_lp
101  * Local Processing, set if packet should be processed by the local
102  * switch hardware:
103  * For Ethernet EMAD (Direct Route and non Direct Route) -
104  * must be set if packet destination is local device
105  * For InfiniBand CTL - must be set if packet destination is local device
106  * Otherwise it must be clear
107  * Local Process packets must not exceed the size of 2K (including payload
108  * and headers).
109  */
110 MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
111
112 /* pci_wqe_type
113  * Packet type.
114  */
115 MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
116
117 /* pci_wqe_byte_count
118  * Size of i-th scatter/gather entry, 0 if entry is unused.
119  */
120 MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
121
122 /* pci_wqe_address
123  * Physical address of i-th scatter/gather entry.
124  * Gather Entries must be 2Byte aligned.
125  */
126 MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
127
128 /* pci_cqe_lag
129  * Packet arrives from a port which is a LAG
130  */
131 MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1);
132
133 /* pci_cqe_system_port
134  * When lag=0: System port on which the packet was received
135  * When lag=1:
136  * bits [15:4] LAG ID on which the packet was received
137  * bits [3:0] sub_port on which the packet was received
138  */
139 MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
140
141 /* pci_cqe_wqe_counter
142  * WQE count of the WQEs completed on the associated dqn
143  */
144 MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
145
146 /* pci_cqe_byte_count
147  * Byte count of received packets including additional two
148  * Reserved Bytes that are append to the end of the frame.
149  * Reserved for Send CQE.
150  */
151 MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
152
153 /* pci_cqe_trap_id
154  * Trap ID that captured the packet.
155  */
156 MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8);
157
158 /* pci_cqe_crc
159  * Length include CRC. Indicates the length field includes
160  * the packet's CRC.
161  */
162 MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1);
163
164 /* pci_cqe_e
165  * CQE with Error.
166  */
167 MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1);
168
169 /* pci_cqe_sr
170  * 1 - Send Queue
171  * 0 - Receive Queue
172  */
173 MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1);
174
175 /* pci_cqe_dqn
176  * Descriptor Queue (DQ) Number.
177  */
178 MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5);
179
180 /* pci_cqe_owner
181  * Ownership bit.
182  */
183 MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1);
184
185 /* pci_eqe_event_type
186  * Event type.
187  */
188 MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
189 #define MLXSW_PCI_EQE_EVENT_TYPE_COMP   0x00
190 #define MLXSW_PCI_EQE_EVENT_TYPE_CMD    0x0A
191
192 /* pci_eqe_event_sub_type
193  * Event type.
194  */
195 MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
196
197 /* pci_eqe_cqn
198  * Completion Queue that triggeret this EQE.
199  */
200 MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
201
202 /* pci_eqe_owner
203  * Ownership bit.
204  */
205 MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
206
207 /* pci_eqe_cmd_token
208  * Command completion event - token
209  */
210 MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16);
211
212 /* pci_eqe_cmd_status
213  * Command completion event - status
214  */
215 MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8);
216
217 /* pci_eqe_cmd_out_param_h
218  * Command completion event - output parameter - higher part
219  */
220 MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32);
221
222 /* pci_eqe_cmd_out_param_l
223  * Command completion event - output parameter - lower part
224  */
225 MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32);
226
227 #endif