drivers/staging/rtl8712/usb_intf.c

   1 /******************************************************************************
   2  * usb_intf.c
   3  *
   4  * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
   5  * Linux device driver for RTL8192SU
   6  *
   7  * This program is free software; you can redistribute it and/or modify it
   8  * under the terms of version 2 of the GNU General Public License as
   9  * published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful, but WITHOUT
  12  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14  * more details.
  15  *
  16  * You should have received a copy of the GNU General Public License along with
  17  * this program; if not, write to the Free Software Foundation, Inc.,
  18  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  19  *
  20  * Modifications for inclusion into the Linux staging tree are
  21  * Copyright(c) 2010 Larry Finger. All rights reserved.
  22  *
  23  * Contact information:
  24  * WLAN FAE <wlanfae@realtek.com>
  25  * Larry Finger <Larry.Finger@lwfinger.net>
  26  *
  27  ******************************************************************************/
  28
  29 #define _HCI_INTF_C_
  30
  31 #include <linux/usb.h>
  32 #include <linux/module.h>
  33
  34 #include "osdep_service.h"
  35 #include "drv_types.h"
  36 #include "recv_osdep.h"
  37 #include "xmit_osdep.h"
  38 #include "rtl8712_efuse.h"
  39 #include "usb_vendor_req.h"
  40 #include "usb_ops.h"
  41 #include "usb_osintf.h"
  42
  43 #define DRVER  "v7_0.20100831"
  44
  45 static struct usb_interface *pintf;
  46
  47 static int r871xu_drv_init(struct usb_interface *pusb_intf,
  48                            const struct usb_device_id *pdid);
  49
  50 static void r871xu_dev_remove(struct usb_interface *pusb_intf);
  51
  52 static struct usb_device_id rtl871x_usb_id_tbl[] = {
  53
  54 /* RTL8188SU */
  55         /* Realtek */
  56         {USB_DEVICE(0x0BDA, 0x8171)},
  57         {USB_DEVICE(0x0bda, 0x8173)},
  58         {USB_DEVICE(0x0bda, 0x8712)},
  59         {USB_DEVICE(0x0bda, 0x8713)},
  60         {USB_DEVICE(0x0bda, 0xC512)},
  61         /* Abocom */
  62         {USB_DEVICE(0x07B8, 0x8188)},
  63         /* ASUS */
  64         {USB_DEVICE(0x0B05, 0x1786)},
  65         {USB_DEVICE(0x0B05, 0x1791)}, /* 11n mode disable */
  66         /* Belkin */
  67         {USB_DEVICE(0x050D, 0x945A)},
  68         /* Corega */
  69         {USB_DEVICE(0x07AA, 0x0047)},
  70         /* D-Link */
  71         {USB_DEVICE(0x2001, 0x3306)},
  72         {USB_DEVICE(0x07D1, 0x3306)}, /* 11n mode disable */
  73         /* Edimax */
  74         {USB_DEVICE(0x7392, 0x7611)},
  75         /* EnGenius */
  76         {USB_DEVICE(0x1740, 0x9603)},
  77         /* Hawking */
  78         {USB_DEVICE(0x0E66, 0x0016)},
  79         /* Hercules */
  80         {USB_DEVICE(0x06F8, 0xE034)},
  81         {USB_DEVICE(0x06F8, 0xE032)},
  82         /* Logitec */
  83         {USB_DEVICE(0x0789, 0x0167)},
  84         /* PCI */
  85         {USB_DEVICE(0x2019, 0xAB28)},
  86         {USB_DEVICE(0x2019, 0xED16)},
  87         /* Sitecom */
  88         {USB_DEVICE(0x0DF6, 0x0057)},
  89         {USB_DEVICE(0x0DF6, 0x0045)},
  90         {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */
  91         {USB_DEVICE(0x0DF6, 0x004B)},
  92         {USB_DEVICE(0x0DF6, 0x0063)},
  93         /* Sweex */
  94         {USB_DEVICE(0x177F, 0x0154)},
  95         /* Thinkware */
  96         {USB_DEVICE(0x0BDA, 0x5077)},
  97         /* Toshiba */
  98         {USB_DEVICE(0x1690, 0x0752)},
  99         /* - */
 100         {USB_DEVICE(0x20F4, 0x646B)},
 101         {USB_DEVICE(0x083A, 0xC512)},
 102
 103 /* RTL8191SU */
 104         /* Realtek */
 105         {USB_DEVICE(0x0BDA, 0x8172)},
 106         /* Amigo */
 107         {USB_DEVICE(0x0EB0, 0x9061)},
 108         /* ASUS/EKB */
 109         {USB_DEVICE(0x0BDA, 0x8172)},
 110         {USB_DEVICE(0x13D3, 0x3323)},
 111         {USB_DEVICE(0x13D3, 0x3311)}, /* 11n mode disable */
 112         {USB_DEVICE(0x13D3, 0x3342)},
 113         /* ASUS/EKBLenovo */
 114         {USB_DEVICE(0x13D3, 0x3333)},
 115         {USB_DEVICE(0x13D3, 0x3334)},
 116         {USB_DEVICE(0x13D3, 0x3335)}, /* 11n mode disable */
 117         {USB_DEVICE(0x13D3, 0x3336)}, /* 11n mode disable */
 118         /* ASUS/Media BOX */
 119         {USB_DEVICE(0x13D3, 0x3309)},
 120         /* Belkin */
 121         {USB_DEVICE(0x050D, 0x815F)},
 122         /* D-Link */
 123         {USB_DEVICE(0x07D1, 0x3302)},
 124         {USB_DEVICE(0x07D1, 0x3300)},
 125         {USB_DEVICE(0x07D1, 0x3303)},
 126         /* Edimax */
 127         {USB_DEVICE(0x7392, 0x7612)},
 128         /* EnGenius */
 129         {USB_DEVICE(0x1740, 0x9605)},
 130         /* Guillemot */
 131         {USB_DEVICE(0x06F8, 0xE031)},
 132         /* Hawking */
 133         {USB_DEVICE(0x0E66, 0x0015)},
 134         /* Mediao */
 135         {USB_DEVICE(0x13D3, 0x3306)},
 136         /* PCI */
 137         {USB_DEVICE(0x2019, 0xED18)},
 138         {USB_DEVICE(0x2019, 0x4901)},
 139         /* Sitecom */
 140         {USB_DEVICE(0x0DF6, 0x0058)},
 141         {USB_DEVICE(0x0DF6, 0x0049)},
 142         {USB_DEVICE(0x0DF6, 0x004C)},
 143         {USB_DEVICE(0x0DF6, 0x0064)},
 144         /* Skyworth */
 145         {USB_DEVICE(0x14b2, 0x3300)},
 146         {USB_DEVICE(0x14b2, 0x3301)},
 147         {USB_DEVICE(0x14B2, 0x3302)},
 148         /* - */
 149         {USB_DEVICE(0x04F2, 0xAFF2)},
 150         {USB_DEVICE(0x04F2, 0xAFF5)},
 151         {USB_DEVICE(0x04F2, 0xAFF6)},
 152         {USB_DEVICE(0x13D3, 0x3339)},
 153         {USB_DEVICE(0x13D3, 0x3340)}, /* 11n mode disable */
 154         {USB_DEVICE(0x13D3, 0x3341)}, /* 11n mode disable */
 155         {USB_DEVICE(0x13D3, 0x3310)},
 156         {USB_DEVICE(0x13D3, 0x3325)},
 157
 158 /* RTL8192SU */
 159         /* Realtek */
 160         {USB_DEVICE(0x0BDA, 0x8174)},
 161         {USB_DEVICE(0x0BDA, 0x8174)},
 162         /* Belkin */
 163         {USB_DEVICE(0x050D, 0x845A)},
 164         /* Corega */
 165         {USB_DEVICE(0x07AA, 0x0051)},
 166         /* Edimax */
 167         {USB_DEVICE(0x7392, 0x7622)},
 168         /* NEC */
 169         {USB_DEVICE(0x0409, 0x02B6)},
 170         {}
 171 };
 172
 173 MODULE_DEVICE_TABLE(usb, rtl871x_usb_id_tbl);
 174
 175 static struct specific_device_id specific_device_id_tbl[] = {
 176         {.idVendor = 0x0b05, .idProduct = 0x1791,
 177                  .flags = SPEC_DEV_ID_DISABLE_HT},
 178         {.idVendor = 0x0df6, .idProduct = 0x0059,
 179                  .flags = SPEC_DEV_ID_DISABLE_HT},
 180         {.idVendor = 0x13d3, .idProduct = 0x3306,
 181                  .flags = SPEC_DEV_ID_DISABLE_HT},
 182         {.idVendor = 0x13D3, .idProduct = 0x3311,
 183                  .flags = SPEC_DEV_ID_DISABLE_HT},
 184         {.idVendor = 0x13d3, .idProduct = 0x3335,
 185                  .flags = SPEC_DEV_ID_DISABLE_HT},
 186         {.idVendor = 0x13d3, .idProduct = 0x3336,
 187                  .flags = SPEC_DEV_ID_DISABLE_HT},
 188         {.idVendor = 0x13d3, .idProduct = 0x3340,
 189                  .flags = SPEC_DEV_ID_DISABLE_HT},
 190         {.idVendor = 0x13d3, .idProduct = 0x3341,
 191                  .flags = SPEC_DEV_ID_DISABLE_HT},
 192         {}
 193 };
 194
 195 struct drv_priv {
 196         struct usb_driver r871xu_drv;
 197         int drv_registered;
 198 };
 199
 200 #ifdef CONFIG_PM
 201 static int r871x_suspend(struct usb_interface *pusb_intf, pm_message_t state)
 202 {
 203         struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
 204
 205         printk(KERN_INFO "r8712: suspending...\n");
 206         if (!pnetdev || !netif_running(pnetdev)) {
 207                 printk(KERN_INFO "r8712: unable to suspend\n");
 208                 return 0;
 209         }
 210         if (pnetdev->netdev_ops->ndo_stop)
 211                 pnetdev->netdev_ops->ndo_stop(pnetdev);
 212         mdelay(10);
 213         netif_device_detach(pnetdev);
 214         return 0;
 215 }
 216
 217 static int r871x_resume(struct usb_interface *pusb_intf)
 218 {
 219         struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
 220
 221         printk(KERN_INFO "r8712: resuming...\n");
 222         if (!pnetdev || !netif_running(pnetdev)) {
 223                 printk(KERN_INFO "r8712: unable to resume\n");
 224                 return 0;
 225         }
 226         netif_device_attach(pnetdev);
 227         if (pnetdev->netdev_ops->ndo_open)
 228                 pnetdev->netdev_ops->ndo_open(pnetdev);
 229         return 0;
 230 }
 231
 232 static int r871x_reset_resume(struct usb_interface *pusb_intf)
 233 {
 234         /* dummy routine */
 235         return 0;
 236 }
 237
 238 #endif
 239
 240 static struct drv_priv drvpriv = {
 241         .r871xu_drv.name = "r8712u",
 242         .r871xu_drv.id_table = rtl871x_usb_id_tbl,
 243         .r871xu_drv.probe = r871xu_drv_init,
 244         .r871xu_drv.disconnect = r871xu_dev_remove,
 245 #ifdef CONFIG_PM
 246         .r871xu_drv.suspend = r871x_suspend,
 247         .r871xu_drv.resume = r871x_resume,
 248         .r871xu_drv.reset_resume = r871x_reset_resume,
 249 #endif
 250 };
 251
 252 static uint r8712_usb_dvobj_init(struct _adapter *padapter)
 253 {
 254         uint    status = _SUCCESS;
 255         struct  usb_device_descriptor           *pdev_desc;
 256         struct  usb_host_config                 *phost_conf;
 257         struct  usb_config_descriptor           *pconf_desc;
 258         struct  usb_host_interface              *phost_iface;
 259         struct  usb_interface_descriptor        *piface_desc;
 260         struct dvobj_priv *pdvobjpriv = &padapter->dvobjpriv;
 261         struct usb_device *pusbd = pdvobjpriv->pusbdev;
 262
 263         pdvobjpriv->padapter = padapter;
 264         padapter->EepromAddressSize = 6;
 265         pdev_desc = &pusbd->descriptor;
 266         phost_conf = pusbd->actconfig;
 267         pconf_desc = &phost_conf->desc;
 268         phost_iface = &pintf->altsetting[0];
 269         piface_desc = &phost_iface->desc;
 270         pdvobjpriv->nr_endpoint = piface_desc->bNumEndpoints;
 271         if (pusbd->speed == USB_SPEED_HIGH) {
 272                 pdvobjpriv->ishighspeed = true;
 273                 printk(KERN_INFO "r8712u: USB_SPEED_HIGH with %d endpoints\n",
 274                        pdvobjpriv->nr_endpoint);
 275         } else {
 276                 pdvobjpriv->ishighspeed = false;
 277                 printk(KERN_INFO "r8712u: USB_SPEED_LOW with %d endpoints\n",
 278                        pdvobjpriv->nr_endpoint);
 279         }
 280         if ((r8712_alloc_io_queue(padapter)) == _FAIL)
 281                 status = _FAIL;
 282         sema_init(&(padapter->dvobjpriv.usb_suspend_sema), 0);
 283         return status;
 284 }
 285
 286 static void r8712_usb_dvobj_deinit(struct _adapter *padapter)
 287 {
 288 }
 289
 290 void rtl871x_intf_stop(struct _adapter *padapter)
 291 {
 292         /*disable_hw_interrupt*/
 293         if (padapter->bSurpriseRemoved == false) {
 294                 /*device still exists, so driver can do i/o operation
 295                  * TODO: */
 296         }
 297
 298         /* cancel in irp */
 299         if (padapter->dvobjpriv.inirp_deinit != NULL)
 300                 padapter->dvobjpriv.inirp_deinit(padapter);
 301         /* cancel out irp */
 302         r8712_usb_write_port_cancel(padapter);
 303         /* TODO:cancel other irps */
 304 }
 305
 306 void r871x_dev_unload(struct _adapter *padapter)
 307 {
 308         if (padapter->bup == true) {
 309                 /*s1.*/
 310                 padapter->bDriverStopped = true;
 311
 312                 /*s3.*/
 313                 rtl871x_intf_stop(padapter);
 314
 315                 /*s4.*/
 316                 r8712_stop_drv_threads(padapter);
 317
 318                 /*s5.*/
 319                 if (padapter->bSurpriseRemoved == false) {
 320                         padapter->hw_init_completed = false;
 321                         rtl8712_hal_deinit(padapter);
 322                 }
 323
 324                 /*s6.*/
 325                 if (padapter->dvobj_deinit)
 326                         padapter->dvobj_deinit(padapter);
 327                 padapter->bup = false;
 328         }
 329 }
 330
 331 static void disable_ht_for_spec_devid(const struct usb_device_id *pdid,
 332                                       struct _adapter *padapter)
 333 {
 334         u16 vid, pid;
 335         u32 flags;
 336         int i;
 337         int num = sizeof(specific_device_id_tbl) /
 338                   sizeof(struct specific_device_id);
 339
 340         for (i = 0; i < num; i++) {
 341                 vid = specific_device_id_tbl[i].idVendor;
 342                 pid = specific_device_id_tbl[i].idProduct;
 343                 flags = specific_device_id_tbl[i].flags;
 344
 345                 if ((pdid->idVendor == vid) && (pdid->idProduct == pid) &&
 346                     (flags&SPEC_DEV_ID_DISABLE_HT)) {
 347                         padapter->registrypriv.ht_enable = 0;
 348                         padapter->registrypriv.cbw40_enable = 0;
 349                         padapter->registrypriv.ampdu_enable = 0;
 350                 }
 351         }
 352 }
 353
 354 static u8 key_2char2num(u8 hch, u8 lch)
 355 {
 356         return (hex_to_bin(hch) << 4) | hex_to_bin(lch);
 357 }
 358
 359 /*
 360  * drv_init() - a device potentially for us
 361  *
 362  * notes: drv_init() is called when the bus driver has located a card for us
 363  * to support. We accept the new device by returning 0.
 364 */
 365 static int r871xu_drv_init(struct usb_interface *pusb_intf,
 366                            const struct usb_device_id *pdid)
 367 {
 368         uint status;
 369         struct _adapter *padapter = NULL;
 370         struct dvobj_priv *pdvobjpriv;
 371         struct net_device *pnetdev;
 372         struct usb_device *udev;
 373
 374         printk(KERN_INFO "r8712u: DriverVersion: %s\n", DRVER);
 375         /* In this probe function, O.S. will provide the usb interface pointer
 376          * to driver. We have to increase the reference count of the usb device
 377          * structure by using the usb_get_dev function.
 378          */
 379         udev = interface_to_usbdev(pusb_intf);
 380         usb_get_dev(udev);
 381         pintf = pusb_intf;
 382         /* step 1. */
 383         pnetdev = r8712_init_netdev();
 384         if (!pnetdev)
 385                 goto error;
 386         padapter = netdev_priv(pnetdev);
 387         disable_ht_for_spec_devid(pdid, padapter);
 388         pdvobjpriv = &padapter->dvobjpriv;
 389         pdvobjpriv->padapter = padapter;
 390         padapter->dvobjpriv.pusbdev = udev;
 391         usb_set_intfdata(pusb_intf, pnetdev);
 392         SET_NETDEV_DEV(pnetdev, &pusb_intf->dev);
 393         /* step 2. */
 394         padapter->dvobj_init = &r8712_usb_dvobj_init;
 395         padapter->dvobj_deinit = &r8712_usb_dvobj_deinit;
 396         padapter->halpriv.hal_bus_init = &r8712_usb_hal_bus_init;
 397         padapter->dvobjpriv.inirp_init = &r8712_usb_inirp_init;
 398         padapter->dvobjpriv.inirp_deinit = &r8712_usb_inirp_deinit;
 399         /* step 3.
 400          * initialize the dvobj_priv
 401          */
 402         if (padapter->dvobj_init == NULL)
 403                         goto error;
 404         else {
 405                 status = padapter->dvobj_init(padapter);
 406                 if (status != _SUCCESS)
 407                         goto error;
 408         }
 409         /* step 4. */
 410         status = r8712_init_drv_sw(padapter);
 411         if (status == _FAIL)
 412                 goto error;
 413         /* step 5. read efuse/eeprom data and get mac_addr */
 414         {
 415                 int i, offset;
 416                 u8 mac[6];
 417                 u8 tmpU1b, AutoloadFail, eeprom_CustomerID;
 418                 u8 *pdata = padapter->eeprompriv.efuse_eeprom_data;
 419
 420                 tmpU1b = r8712_read8(padapter, EE_9346CR);/*CR9346*/
 421
 422                 /* To check system boot selection.*/
 423                 printk(KERN_INFO "r8712u: Boot from %s: Autoload %s\n",
 424                        (tmpU1b & _9356SEL) ? "EEPROM" : "EFUSE",
 425                        (tmpU1b & _EEPROM_EN) ? "OK" : "Failed");
 426
 427                 /* To check autoload success or not.*/
 428                 if (tmpU1b & _EEPROM_EN) {
 429                         AutoloadFail = true;
 430                         /* The following operations prevent Efuse leakage by
 431                          * turning on 2.5V.
 432                          */
 433                         tmpU1b = r8712_read8(padapter, EFUSE_TEST+3);
 434                         r8712_write8(padapter, EFUSE_TEST + 3, tmpU1b | 0x80);
 435                         msleep(20);
 436                         r8712_write8(padapter, EFUSE_TEST + 3,
 437                                      (tmpU1b & (~BIT(7))));
 438
 439                         /* Retrieve Chip version.
 440                          * Recognize IC version by Reg0x4 BIT15.
 441                          */
 442                         tmpU1b = (u8)((r8712_read32(padapter, PMC_FSM) >> 15) &
 443                                                     0x1F);
 444                         if (tmpU1b == 0x3)
 445                                 padapter->registrypriv.chip_version =
 446                                      RTL8712_3rdCUT;
 447                         else
 448                                 padapter->registrypriv.chip_version =
 449                                      (tmpU1b >> 1) + 1;
 450                         switch (padapter->registrypriv.chip_version) {
 451                         case RTL8712_1stCUT:
 452                         case RTL8712_2ndCUT:
 453                         case RTL8712_3rdCUT:
 454                                 break;
 455                         default:
 456                                 padapter->registrypriv.chip_version =
 457                                      RTL8712_2ndCUT;
 458                                 break;
 459                         }
 460
 461                         for (i = 0, offset = 0; i < 128; i += 8, offset++)
 462                                 r8712_efuse_pg_packet_read(padapter, offset,
 463                                                      &pdata[i]);
 464
 465                         if (r8712_initmac) {
 466                                 /* Users specify the mac address */
 467                                 int jj, kk;
 468
 469                                 for (jj = 0, kk = 0; jj < ETH_ALEN;
 470                                      jj++, kk += 3)
 471                                         mac[jj] =
 472                                            key_2char2num(r8712_initmac[kk],
 473                                            r8712_initmac[kk + 1]);
 474                         } else {
 475                                 /* Use the mac address stored in the Efuse
 476                                  * offset = 0x12 for usb in efuse
 477                                  */
 478                                 memcpy(mac, &pdata[0x12], ETH_ALEN);
 479                         }
 480                         eeprom_CustomerID = pdata[0x52];
 481                         switch (eeprom_CustomerID) {
 482                         case EEPROM_CID_ALPHA:
 483                                 padapter->eeprompriv.CustomerID =
 484                                                  RT_CID_819x_ALPHA;
 485                                 break;
 486                         case EEPROM_CID_CAMEO:
 487                                 padapter->eeprompriv.CustomerID =
 488                                                  RT_CID_819x_CAMEO;
 489                                 break;
 490                         case EEPROM_CID_SITECOM:
 491                                 padapter->eeprompriv.CustomerID =
 492                                                  RT_CID_819x_Sitecom;
 493                                 break;
 494                         case EEPROM_CID_COREGA:
 495                                 padapter->eeprompriv.CustomerID =
 496                                                  RT_CID_COREGA;
 497                                 break;
 498                         case EEPROM_CID_Senao:
 499                                 padapter->eeprompriv.CustomerID =
 500                                                  RT_CID_819x_Senao;
 501                                 break;
 502                         case EEPROM_CID_EDIMAX_BELKIN:
 503                                 padapter->eeprompriv.CustomerID =
 504                                                  RT_CID_819x_Edimax_Belkin;
 505                                 break;
 506                         case EEPROM_CID_SERCOMM_BELKIN:
 507                                 padapter->eeprompriv.CustomerID =
 508                                                  RT_CID_819x_Sercomm_Belkin;
 509                                 break;
 510                         case EEPROM_CID_WNC_COREGA:
 511                                 padapter->eeprompriv.CustomerID =
 512                                                  RT_CID_819x_WNC_COREGA;
 513                                 break;
 514                         case EEPROM_CID_WHQL:
 515                                 break;
 516                         case EEPROM_CID_NetCore:
 517                                 padapter->eeprompriv.CustomerID =
 518                                                  RT_CID_819x_Netcore;
 519                                 break;
 520                         case EEPROM_CID_CAMEO1:
 521                                 padapter->eeprompriv.CustomerID =
 522                                                  RT_CID_819x_CAMEO1;
 523                                 break;
 524                         case EEPROM_CID_CLEVO:
 525                                 padapter->eeprompriv.CustomerID =
 526                                                  RT_CID_819x_CLEVO;
 527                                 break;
 528                         default:
 529                                 padapter->eeprompriv.CustomerID =
 530                                                  RT_CID_DEFAULT;
 531                                 break;
 532                         }
 533                         printk(KERN_INFO "r8712u: CustomerID = 0x%.4x\n",
 534                              padapter->eeprompriv.CustomerID);
 535                         /* Led mode */
 536                         switch (padapter->eeprompriv.CustomerID) {
 537                         case RT_CID_DEFAULT:
 538                         case RT_CID_819x_ALPHA:
 539                         case RT_CID_819x_CAMEO:
 540                                 padapter->ledpriv.LedStrategy = SW_LED_MODE1;
 541                                 padapter->ledpriv.bRegUseLed = true;
 542                                 break;
 543                         case RT_CID_819x_Sitecom:
 544                                 padapter->ledpriv.LedStrategy = SW_LED_MODE2;
 545                                 padapter->ledpriv.bRegUseLed = true;
 546                                 break;
 547                         case RT_CID_COREGA:
 548                         case RT_CID_819x_Senao:
 549                                 padapter->ledpriv.LedStrategy = SW_LED_MODE3;
 550                                 padapter->ledpriv.bRegUseLed = true;
 551                                 break;
 552                         case RT_CID_819x_Edimax_Belkin:
 553                                 padapter->ledpriv.LedStrategy = SW_LED_MODE4;
 554                                 padapter->ledpriv.bRegUseLed = true;
 555                                 break;
 556                         case RT_CID_819x_Sercomm_Belkin:
 557                                 padapter->ledpriv.LedStrategy = SW_LED_MODE5;
 558                                 padapter->ledpriv.bRegUseLed = true;
 559                                 break;
 560                         case RT_CID_819x_WNC_COREGA:
 561                                 padapter->ledpriv.LedStrategy = SW_LED_MODE6;
 562                                 padapter->ledpriv.bRegUseLed = true;
 563                                 break;
 564                         default:
 565                                 padapter->ledpriv.LedStrategy = SW_LED_MODE0;
 566                                 padapter->ledpriv.bRegUseLed = false;
 567                                 break;
 568                         }
 569                 } else
 570                         AutoloadFail = false;
 571                 if (((mac[0] == 0xff) && (mac[1] == 0xff) &&
 572                      (mac[2] == 0xff) && (mac[3] == 0xff) &&
 573                      (mac[4] == 0xff) && (mac[5] == 0xff)) ||
 574                     ((mac[0] == 0x00) && (mac[1] == 0x00) &&
 575                      (mac[2] == 0x00) && (mac[3] == 0x00) &&
 576                      (mac[4] == 0x00) && (mac[5] == 0x00)) ||
 577                      (AutoloadFail == false)) {
 578                         mac[0] = 0x00;
 579                         mac[1] = 0xe0;
 580                         mac[2] = 0x4c;
 581                         mac[3] = 0x87;
 582                         mac[4] = 0x00;
 583                         mac[5] = 0x00;
 584                 }
 585                 if (r8712_initmac) {
 586                         /* Make sure the user did not select a multicast
 587                          * address by setting bit 1 of first octet.
 588                          */
 589                         mac[0] &= 0xFE;
 590                         printk(KERN_INFO "r8712u: MAC Address from user = "
 591                                "%pM\n", mac);
 592                 } else
 593                         printk(KERN_INFO "r8712u: MAC Address from efuse = "
 594                                "%pM\n", mac);
 595                 memcpy(pnetdev->dev_addr, mac, ETH_ALEN);
 596         }
 597         /* step 6. Tell the network stack we exist */
 598         if (register_netdev(pnetdev) != 0)
 599                 goto error;
 600         spin_lock_init(&padapter->lockRxFF0Filter);
 601         return 0;
 602 error:
 603         usb_put_dev(udev);
 604         usb_set_intfdata(pusb_intf, NULL);
 605         if (padapter->dvobj_deinit != NULL)
 606                 padapter->dvobj_deinit(padapter);
 607         if (pnetdev)
 608                 free_netdev(pnetdev);
 609         return -ENODEV;
 610 }
 611
 612 /* rmmod module & unplug(SurpriseRemoved) will call r871xu_dev_remove()
 613  * => how to recognize both */
 614 static void r871xu_dev_remove(struct usb_interface *pusb_intf)
 615 {
 616         struct net_device *pnetdev = usb_get_intfdata(pusb_intf);
 617         struct _adapter *padapter = netdev_priv(pnetdev);
 618         struct usb_device *udev = interface_to_usbdev(pusb_intf);
 619
 620         usb_set_intfdata(pusb_intf, NULL);
 621         if (padapter) {
 622                 if (drvpriv.drv_registered == true)
 623                         padapter->bSurpriseRemoved = true;
 624                 if (pnetdev != NULL) {
 625                         /* will call netdev_close() */
 626                         unregister_netdev(pnetdev);
 627                 }
 628                 flush_scheduled_work();
 629                 udelay(1);
 630                 /*Stop driver mlme relation timer */
 631                 r8712_stop_drv_timers(padapter);
 632                 r871x_dev_unload(padapter);
 633                 r8712_free_drv_sw(padapter);
 634         }
 635         usb_set_intfdata(pusb_intf, NULL);
 636         /* decrease the reference count of the usb device structure
 637          * when disconnect */
 638         usb_put_dev(udev);
 639         /* If we didn't unplug usb dongle and remove/insert modlue, driver
 640          * fails on sitesurvey for the first time when device is up.
 641          * Reset usb port for sitesurvey fail issue. */
 642         if (udev->state != USB_STATE_NOTATTACHED)
 643                 usb_reset_device(udev);
 644         return;
 645 }
 646
 647 static int __init r8712u_drv_entry(void)
 648 {
 649         drvpriv.drv_registered = true;
 650         return usb_register(&drvpriv.r871xu_drv);
 651 }
 652
 653 static void __exit r8712u_drv_halt(void)
 654 {
 655         drvpriv.drv_registered = false;
 656         usb_deregister(&drvpriv.r871xu_drv);
 657         printk(KERN_INFO "r8712u: Driver unloaded\n");
 658 }
 659
 660 module_init(r8712u_drv_entry);
 661 module_exit(r8712u_drv_halt);