Merge remote-tracking branch 'xfs/for-next'

[karo-tx-linux.git] / Documentation / devicetree / bindings / input / touchscreen / edt-ft5x06.txt

diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
index 76db96704a602e823fc6d09a04ddfd000a5949a7..f99528da1b1d4d7f354441d7c11e7dc2abe3c9ad 100644 (file)
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -5,6 +5,7 @@ There are 3 variants of the chip for various touch panel sizes
 FT5206GE1  2.8" .. 3.8"
 FT5306DE4  4.3" .. 7"
 FT5406EE8  7"   .. 8.9"
+FT5506EEG  7"   .. 8.9"
 
 The software interface is identical for all those chips, so that
 currently there is no need for the driver to distinguish between the
@@ -17,6 +18,7 @@ Required properties:
  - compatible:  "edt,edt-ft5206"
            or:  "edt,edt-ft5306"
            or:  "edt,edt-ft5406"
+           or:  "edt,edt-ft5506"
 
  - reg:         I2C slave address of the chip (0x38)
  - interrupt-parent: a phandle pointing to the interrupt controller
@@ -49,7 +51,7 @@ Example:
                pinctrl-names = "default";
                pinctrl-0 = <&edt_ft5x06_pins>;
                interrupt-parent = <&gpio2>;
-               interrupts = <5 0>;
-               reset-gpios = <&gpio2 6 1>;
-               wake-gpios = <&gpio4 9 0>;
+               interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+               reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+               wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
        };