cpsw: simplify the setup of the register pointers

[karo-tx-linux.git] / Documentation / devicetree / bindings / net / cpsw.txt

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 221460714c56a56309867005254432edf046e4bb..6ddd0286a9b7514fe00a5f150e05859da0f25e36 100644 (file)
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -9,15 +9,7 @@ Required properties:
                          number
 - interrupt-parent     : The parent interrupt controller
 - cpdma_channels       : Specifies number of channels in CPDMA
-- host_port_no         : Specifies host port shift
-- cpdma_reg_ofs                : Specifies CPDMA submodule register offset
-- cpdma_sram_ofs       : Specifies CPDMA SRAM offset
-- ale_reg_ofs          : Specifies ALE submodule register offset
 - ale_entries          : Specifies No of entries ALE can hold
-- host_port_reg_ofs    : Specifies host port register offset
-- hw_stats_reg_ofs     : Specifies hardware statistics register offset
-- cpts_reg_ofs         : Specifies the offset of the CPTS registers
-- bd_ram_ofs           : Specifies internal desciptor RAM offset
 - bd_ram_size          : Specifies internal descriptor RAM size
 - rx_descs             : Specifies number of Rx descriptors
 - mac_control          : Specifies Default MAC control register content
@@ -26,8 +18,6 @@ Required properties:
 - cpts_active_slave    : Specifies the slave to use for time stamping
 - cpts_clock_mult      : Numerator to convert input clock ticks into nanoseconds
 - cpts_clock_shift     : Denominator to convert input clock ticks into nanoseconds
-- slave_reg_ofs                : Specifies slave register offset
-- sliver_reg_ofs       : Specifies slave sliver register offset
 - phy_id               : Specifies slave phy id
 - mac-address          : Specifies slave MAC address
 
@@ -49,15 +39,7 @@ Examples:
                interrupts = <55 0x4>;
                interrupt-parent = <&intc>;
                cpdma_channels = <8>;
-               host_port_no = <0>;
-               cpdma_reg_ofs = <0x800>;
-               cpdma_sram_ofs = <0xa00>;
-               ale_reg_ofs = <0xd00>;
                ale_entries = <1024>;
-               host_port_reg_ofs = <0x108>;
-               hw_stats_reg_ofs = <0x900>;
-               cpts_reg_ofs = <0xc00>;
-               bd_ram_ofs = <0x2000>;
                bd_ram_size = <0x2000>;
                no_bd_ram = <0>;
                rx_descs = <64>;
@@ -67,16 +49,12 @@ Examples:
                cpts_clock_mult = <0x80000000>;
                cpts_clock_shift = <29>;
                cpsw_emac0: slave@0 {
-                       slave_reg_ofs = <0x200>;
-                       sliver_reg_ofs = <0xd80>;
-                       phy_id = "davinci_mdio.16:00";
+                       phy_id = <&davinci_mdio>, <0>;
                        /* Filled in by U-Boot */
                        mac-address = [ 00 00 00 00 00 00 ];
                };
                cpsw_emac1: slave@1 {
-                       slave_reg_ofs = <0x300>;
-                       sliver_reg_ofs = <0xdc0>;
-                       phy_id = "davinci_mdio.16:01";
+                       phy_id = <&davinci_mdio>, <1>;
                        /* Filled in by U-Boot */
                        mac-address = [ 00 00 00 00 00 00 ];
                };
@@ -87,15 +65,7 @@ Examples:
                compatible = "ti,cpsw";
                ti,hwmods = "cpgmac0";
                cpdma_channels = <8>;
-               host_port_no = <0>;
-               cpdma_reg_ofs = <0x800>;
-               cpdma_sram_ofs = <0xa00>;
-               ale_reg_ofs = <0xd00>;
                ale_entries = <1024>;
-               host_port_reg_ofs = <0x108>;
-               hw_stats_reg_ofs = <0x900>;
-               cpts_reg_ofs = <0xc00>;
-               bd_ram_ofs = <0x2000>;
                bd_ram_size = <0x2000>;
                no_bd_ram = <0>;
                rx_descs = <64>;
@@ -105,16 +75,12 @@ Examples:
                cpts_clock_mult = <0x80000000>;
                cpts_clock_shift = <29>;
                cpsw_emac0: slave@0 {
-                       slave_reg_ofs = <0x200>;
-                       sliver_reg_ofs = <0xd80>;
-                       phy_id = "davinci_mdio.16:00";
+                       phy_id = <&davinci_mdio>, <0>;
                        /* Filled in by U-Boot */
                        mac-address = [ 00 00 00 00 00 00 ];
                };
                cpsw_emac1: slave@1 {
-                       slave_reg_ofs = <0x300>;
-                       sliver_reg_ofs = <0xdc0>;
-                       phy_id = "davinci_mdio.16:01";
+                       phy_id = <&davinci_mdio>, <1>;
                        /* Filled in by U-Boot */
                        mac-address = [ 00 00 00 00 00 00 ];
                };