Merge remote-tracking branch 'at91/at91-next'

[karo-tx-linux.git] / arch / arm / boot / dts / exynos4210-universal_c210.dts

diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index eb379526e23425f145daa1f20069f07292bc7f88..81b7ec7b3e3178e6bd81c91eb561790b17b4659f 100644 (file)
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "Samsung Universal C210 based on Exynos4210 rev0";
@@ -65,7 +66,7 @@
                regulator-name = "VMEM_VDD_2_8V";
                regulator-min-microvolt = <2800000>;
                regulator-max-microvolt = <2800000>;
-               gpio = <&gpe1 3 0>;
+               gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 
@@ -73,21 +74,21 @@
                compatible = "gpio-keys";
 
                vol-up-key {
-                       gpios = <&gpx2 0 1>;
+                       gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
                        linux,code = <115>;
                        label = "volume up";
                        debounce-interval = <1>;
                };
 
                vol-down-key {
-                       gpios = <&gpx2 1 1>;
+                       gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
                        linux,code = <114>;
                        label = "volume down";
                        debounce-interval = <1>;
                };
 
                config-key {
-                       gpios = <&gpx2 2 1>;
+                       gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
                        linux,code = <171>;
                        label = "config";
                        debounce-interval = <1>;
@@ -95,14 +96,14 @@
                };
 
                camera-key {
-                       gpios = <&gpx2 3 1>;
+                       gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
                        linux,code = <212>;
                        label = "camera";
                        debounce-interval = <1>;
                };
 
                power-key {
-                       gpios = <&gpx2 7 1>;
+                       gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
                        linux,code = <116>;
                        label = "power";
                        debounce-interval = <1>;
@@ -110,7 +111,7 @@
                };
 
                ok-key {
-                       gpios = <&gpx3 5 1>;
+                       gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
                        linux,code = <352>;
                        label = "ok";
                        debounce-interval = <1>;
@@ -122,7 +123,7 @@
                regulator-name = "TSP_2_8V";
                regulator-min-microvolt = <2800000>;
                regulator-max-microvolt = <2800000>;
-               gpio = <&gpe2 3 0>;
+               gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 
@@ -131,17 +132,17 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
-               gpio-sck = <&gpy3 1 0>;
-               gpio-mosi = <&gpy3 3 0>;
+               gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+               gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
                num-chipselects = <1>;
-               cs-gpios = <&gpy4 3 0>;
+               cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
 
                lcd@0 {
                        compatible = "samsung,ld9040";
                        reg = <0>;
                        vdd3-supply = <&ldo7_reg>;
                        vci-supply = <&ldo17_reg>;
-                       reset-gpios = <&gpy4 5 0>;
+                       reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
                        spi-max-frequency = <1200000>;
                        spi-cpol;
                        spi-cpha;
@@ -218,13 +219,13 @@
                regulator-name = "HDMI_5V";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
-               gpio = <&gpe0 1 0>;
+               gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 
        hdmi_ddc: i2c-ddc {
                compatible = "i2c-gpio";
-               gpios = <&gpe4 2 0 &gpe4 3 0>;
+               gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
                i2c-gpio,delay-us = <100>;
                #address-cells = <1>;
                #size-cells = <0>;
@@ -248,6 +249,7 @@
 
 &exynos_usbphy {
        status = "okay";
+       vbus-supply = <&safeout1_reg>;
 };
 
 &fimd {
@@ -267,7 +269,7 @@
 };
 
 &hdmi {
-       hpd-gpio = <&gpx3 7 0>;
+       hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
        pinctrl-names = "default";
        pinctrl-0 = <&hdmi_hpd>;
        hdmi-en-supply = <&hdmi_en>;
@@ -311,7 +313,8 @@
                compatible = "maxim,max8952";
                reg = <0x60>;
 
-               max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+               max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+                                   <&gpx0 4 GPIO_ACTIVE_HIGH>;
                max8952,default-mode = <0>;
                max8952,dvs-mode-microvolt = <1250000>, <1200000>,
                                                <1050000>, <950000>;
@@ -330,13 +333,13 @@
                reg = <0x66>;
 
                max8998,pmic-buck1-default-dvs-idx = <0>;
-               max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-                                               <&gpx0 6 0>;
+               max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+                                               <&gpx0 6 GPIO_ACTIVE_HIGH>;
                max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
                                                <1100000>, <1000000>;
 
                max8998,pmic-buck2-default-dvs-idx = <0>;
-               max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+               max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
                max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
 
                regulators {
@@ -486,7 +489,6 @@
 
                        safeout1_reg: ESAFEOUT1 {
                                regulator-name = "SAFEOUT1";
-                               regulator-always-on;
                        };
 
                        safeout2_reg: ESAFEOUT2 {
@@ -551,7 +553,7 @@
        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
        pinctrl-names = "default";
        vmmc-supply = <&ldo5_reg>;
-       cd-gpios = <&gpx3 4 0>;
+       cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
        cd-inverted;
        status = "okay";
 };