/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-nsa310-common.dtsi"
/ {
- model = "ZyXEL NSA310";
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
bootargs = "console=ttyS0,115200";
};
+ mbus {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = <&pmx_unknown>;
marvell,function = "gpio";
};
- pmx_usb_power_off: pmx-usb-power-off {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
marvell,pins = "mpp46";
marvell,function = "gpio";
};
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
- };
-
- serial@12000 {
- status = "ok";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
};
i2c@11000 {
reg = <0x2e>;
};
};
-
- nand@3000000 {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x0100000>;
- read-only;
- };
- partition@100000 {
- label = "uboot_env";
- reg = <0x0100000 0x0080000>;
- };
- partition@180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition@200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition@280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition@c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition@1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition@4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition@5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
- };
- };
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- status = "okay";
- };
- };
};
gpio_keys {
gpios = <&gpio1 8 0>;
};
};
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio1 16 0>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_off>;
- pinctrl-names = "default";
-
- usb0_power_off: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power Off";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 0>;
- };
- };
};