#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/regulator/max1586.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
#include "devices.h"
#include "generic.h"
GPIO80_nCS_4,
GPIO33_nCS_5,
- /* I2C */
+ /* I2C UDA1380 + OV9640 */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
- /* PWM 0 */
+ /* PWM 0 - LCD backlight */
GPIO16_PWM0_OUT,
- /* I2S */
+ /* I2S UDA1380 capture */
GPIO28_I2S_BITCLK_OUT,
GPIO29_I2S_SDATA_IN,
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
- /* SSP 1 */
+ /* SSP 1 UDA1380 playback */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
- /* SSP 2 */
+ /* SSP 2 TSC2046 touchscreen */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
- /* MMC */
+ /* MMC/SD/SDHC slot */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
/* LCD */
GPIOxx_LCD_TFT_16BPP,
- /* QCI */
+ /* QCI camera interface */
GPIO12_CIF_DD_7,
GPIO17_CIF_DD_6,
GPIO50_CIF_DD_3,
};
/*
- * IRDA
+ * IrDA
*/
static struct pxaficp_platform_data magician_ficp_info = {
.gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
.transceiver_cap = IR_SIRMODE | IR_OFF,
+ .gpio_pwdown_inverted = 0,
};
/*
/*
* EGPIO (Xilinx CPLD)
*
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ * 32-bit aligned 8-bit registers
+ * 16 possible registers (reg windows size), only 7 used:
+ * 3x output, 1x irq, 3x input
*/
static struct resource egpio_resources[] = {
.gpio_base = MAGICIAN_EGPIO(0, 0),
.num_gpios = 24,
.direction = HTC_EGPIO_OUTPUT,
+ /*
+ * Depends on modules configuration
+ */
.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
},
[1] = {
};
/*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
*/
static struct pxafb_mode_info toppoly_modes[] = {
static struct pxafb_mode_info samsung_modes[] = {
{
- .pixclock = 96153,
+ .pixclock = 226469,
.bpp = 16,
.xres = 240,
.yres = 320,
if (on) {
gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
udelay(2000);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
udelay(2000);
/* FIXME: enable LCDC here */
udelay(2000);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
udelay(2000);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
msleep(15);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
udelay(500);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
udelay(1000);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
}
}
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
else
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
- mdelay(10);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
- mdelay(30);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
- mdelay(10);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+ mdelay(6); /* Avdd -> Voff >5ms */
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+ mdelay(16); /* Voff -> Von >(5+10)ms */
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
- mdelay(10);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
- mdelay(30);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
- mdelay(10);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+ mdelay(16);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+ mdelay(6);
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
else
PWM_POLARITY_NORMAL),
};
+ /*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+ REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
+
static struct gpio magician_bl_gpios[] = {
{ EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
static int magician_backlight_notify(struct device *dev, int brightness)
{
+ pr_debug("Brightness = %i\n", brightness);
gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
if (brightness >= 200) {
gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
}
+/*
+ * LCD PWM backlight (main)
+ *
+ * MP1521 frequency should be:
+ * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
static struct platform_pwm_backlight_data backlight_data = {
.max_brightness = 272,
.dft_brightness = 100,
};
/*
- * LEDs
+ * GPIO LEDs, Phone keys backlight, vibra
*/
static struct gpio_led gpio_leds[] = {
},
};
-static struct pasic3_led pasic3_leds[] = {
- {
- .led = {
- .name = "magician:red",
- .default_trigger = "ds2760-battery.0-charging",
- },
- .hw_num = 0,
- .bit2 = PASIC3_BIT2_LED0,
- .mask = PASIC3_MASK_LED0,
- },
- {
- .led = {
- .name = "magician:green",
- .default_trigger = "ds2760-battery.0-charging-or-full",
- },
- .hw_num = 1,
- .bit2 = PASIC3_BIT2_LED1,
- .mask = PASIC3_MASK_LED1,
- },
- {
- .led = {
- .name = "magician:blue",
- .default_trigger = "bluetooth",
- },
- .hw_num = 2,
- .bit2 = PASIC3_BIT2_LED2,
- .mask = PASIC3_MASK_LED2,
- },
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
- .num_leds = ARRAY_SIZE(pasic3_leds),
- .power_gpio = EGPIO_MAGICIAN_LED_POWER,
- .leds = pasic3_leds,
-};
-
/*
* PASIC3 with DS1WM
*/
};
static struct pasic3_platform_data pasic3_platform_data = {
- .led_pdata = &pasic3_leds_info,
- .clock_rate = 4000000,
+ .clock_rate = 4000000,
};
static struct platform_device pasic3 = {
};
/*
- * USB "Transceiver"
+ * PXA UDC
+ */
+
+static void magician_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+ .udc_command = magician_udc_command,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+/*
+ * USB device VBus detection
*/
static struct resource gpio_vbus_resource = {
static struct gpio_vbus_mach_info gpio_vbus_info = {
.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
- .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS,
};
static struct platform_device gpio_vbus = {
* External power
*/
-static int power_supply_init(struct device *dev)
+static int magician_supply_init(struct device *dev)
+{
+ int ret = -1;
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
+ if (ret) {
+ pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+ goto err_ac;
+ }
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
+ if (ret) {
+ pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+ goto err_usb;
+ }
+
+ return 0;
+
+err_usb:
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+ return ret;
+}
+
+static void magician_set_charge(int flags)
{
- return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+ if (flags & PDA_POWER_CHARGE_AC) {
+ pr_debug("Charging from AC\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else if (flags & PDA_POWER_CHARGE_USB) {
+ pr_debug("Charging from USB\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else {
+ pr_debug("Charging disabled\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+ }
}
static int magician_is_ac_online(void)
{
- return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
}
-static void power_supply_exit(struct device *dev)
+static int magician_is_usb_online(void)
{
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+ (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+}
+
+static void magician_supply_exit(struct device *dev)
+{
+ gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
}
static char *magician_supplicants[] = {
};
static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
+ .init = magician_supply_init,
+ .exit = magician_supply_exit,
.is_ac_online = magician_is_ac_online,
- .exit = power_supply_exit,
+ .is_usb_online = magician_is_usb_online,
+ .set_charge = magician_set_charge,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
};
.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
.enable_high = 0,
- .enabled_at_boot = 0,
+ .enabled_at_boot = 1,
.gpios = bq24022_gpios,
.nr_gpios = ARRAY_SIZE(bq24022_gpios),
},
};
+/*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 700000,
+ .max_uV = 1475000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = magician_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &magician_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+ .subdevs = magician_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+ /*
+ * NOTICE measured directly on the PCB (board_id == 0x3a), but
+ * if R24 is present, it will boost the voltage
+ * (write 1.475V, get 1.645V and smoke)
+ */
+ .v3_gain = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &magician_max1587a_info,
+ },
+};
+
/*
* MMC/SD
*/
static struct pxaohci_platform_data magician_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+ /* port1: CSR Bluetooth, port2: OTG with UDC */
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.power_budget = 0,
+ .power_on_delay = 100,
};
/*
* StrataFlash
*/
+static int magician_flash_init(struct platform_device *pdev)
+{
+ int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+ if (ret) {
+ pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+ return ret;
+ }
+
+ ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+ if (ret) {
+ pr_err("Cannot set direction for flash enable (%i)\n", ret);
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+ }
+
+ return ret;
+}
+
static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
+static void magician_flash_exit(struct platform_device *pdev)
+{
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
static struct resource strataflash_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
+static struct mtd_partition magician_flash_parts[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */
+ },
+ {
+ .name = "Linux Kernel",
+ .offset = 0x40000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+/*
+ * physmap-flash driver
+ */
+
static struct physmap_flash_data strataflash_data = {
.width = 4,
+ .init = magician_flash_init,
.set_vpp = magician_set_vpp,
+ .exit = magician_flash_exit,
+ .parts = magician_flash_parts,
+ .nr_parts = ARRAY_SIZE(magician_flash_parts),
};
static struct platform_device strataflash = {
};
/*
- * I2C
+ * PXA I2C main controller
*/
static struct i2c_pxa_platform_data i2c_info = {
- .fast_mode = 1,
+ /* OV9640 I2C device doesn't support fast mode */
+ .fast_mode = 0,
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+ .fast_mode = 1,
};
/*
static struct gpio magician_global_gpios[] = {
{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
- { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
- { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
- { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
- { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+
+ /* NOTICE valid LCD init sequence */
+ { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
+ { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
+ { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
};
static void __init magician_init(void)
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
- pxa_set_stuart_info(NULL);
pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
- platform_add_devices(ARRAY_AND_SIZE(devices));
pxa_set_ficp_info(&magician_ficp_info);
- pxa27x_set_i2c_power_info(NULL);
+ pxa27x_set_i2c_power_info(&magician_i2c_power_info);
pxa_set_i2c_info(&i2c_info);
+
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_udc_info(&magician_udc_info);
/* Check LCD type we have */
cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
lcd_select = board_id & 0x8;
pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
if (lcd_select && (system_rev < 3))
+ /* NOTICE valid LCD init sequence */
gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
pxa_set_fb_info(NULL,
lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
+
+ regulator_register_always_on(0, "power", pwm_backlight_supply,
+ ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
}
MACHINE_START(MAGICIAN, "HTC Magician")