if (!state)
return NULL;
+ /* TODO legacy paths should maybe do a better job about
+ * setting this appropriately?
+ */
+ state->allow_modeset = true;
+
state->num_connector = ACCESS_ONCE(dev->mode_config.num_connector);
state->crtcs = kcalloc(dev->mode_config.num_crtc,
connector->funcs->atomic_destroy_state(connector,
state->connector_states[i]);
+ state->connector_states[i] = NULL;
}
for (i = 0; i < config->num_crtc; i++) {
crtc->funcs->atomic_destroy_state(crtc,
state->crtc_states[i]);
+ state->crtc_states[i] = NULL;
}
for (i = 0; i < config->num_total_plane; i++) {
plane->funcs->atomic_destroy_state(plane,
state->plane_states[i]);
+ state->plane_states[i] = NULL;
}
}
EXPORT_SYMBOL(drm_atomic_state_clear);
}
EXPORT_SYMBOL(drm_atomic_get_crtc_state);
+/**
+ * drm_atomic_crtc_set_property - set property on CRTC
+ * @crtc: the drm CRTC to set a property on
+ * @state: the state object to update with the new property value
+ * @property: the property to set
+ * @val: the new property value
+ *
+ * Use this instead of calling crtc->atomic_set_property directly.
+ * This function handles generic/core properties and calls out to
+ * driver's ->atomic_set_property() for driver properties. To ensure
+ * consistent behavior you must call this function rather than the
+ * driver hook directly.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
+ struct drm_crtc_state *state, struct drm_property *property,
+ uint64_t val)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+
+ /* FIXME: Mode prop is missing, which also controls ->enable. */
+ if (property == config->prop_active) {
+ state->active = val;
+ } else if (crtc->funcs->atomic_set_property)
+ return crtc->funcs->atomic_set_property(crtc, state, property, val);
+ return -EINVAL;
+}
+EXPORT_SYMBOL(drm_atomic_crtc_set_property);
+
+/*
+ * This function handles generic/core properties and calls out to
+ * driver's ->atomic_get_property() for driver properties. To ensure
+ * consistent behavior you must call this function rather than the
+ * driver hook directly.
+ */
+int drm_atomic_crtc_get_property(struct drm_crtc *crtc,
+ const struct drm_crtc_state *state,
+ struct drm_property *property, uint64_t *val)
+{
+ if (crtc->funcs->atomic_get_property)
+ return crtc->funcs->atomic_get_property(crtc, state, property, val);
+ return -EINVAL;
+}
+
+/**
+ * drm_atomic_crtc_check - check crtc state
+ * @crtc: crtc to check
+ * @state: crtc state to check
+ *
+ * Provides core sanity checks for crtc state.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+static int drm_atomic_crtc_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ /* NOTE: we explicitly don't enforce constraints such as primary
+ * layer covering entire screen, since that is something we want
+ * to allow (on hw that supports it). For hw that does not, it
+ * should be checked in driver's crtc->atomic_check() vfunc.
+ *
+ * TODO: Add generic modeset state checks once we support those.
+ */
+
+ if (state->active && !state->enable) {
+ DRM_DEBUG_KMS("[CRTC:%d] active without enabled\n",
+ crtc->base.id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/**
* drm_atomic_get_plane_state - get plane state
* @state: global atomic state object
}
EXPORT_SYMBOL(drm_atomic_get_plane_state);
+/**
+ * drm_atomic_plane_set_property - set property on plane
+ * @plane: the drm plane to set a property on
+ * @state: the state object to update with the new property value
+ * @property: the property to set
+ * @val: the new property value
+ *
+ * Use this instead of calling plane->atomic_set_property directly.
+ * This function handles generic/core properties and calls out to
+ * driver's ->atomic_set_property() for driver properties. To ensure
+ * consistent behavior you must call this function rather than the
+ * driver hook directly.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int drm_atomic_plane_set_property(struct drm_plane *plane,
+ struct drm_plane_state *state, struct drm_property *property,
+ uint64_t val)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+
+ if (property == config->prop_fb_id) {
+ struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, val);
+ drm_atomic_set_fb_for_plane(state, fb);
+ if (fb)
+ drm_framebuffer_unreference(fb);
+ } else if (property == config->prop_crtc_id) {
+ struct drm_crtc *crtc = drm_crtc_find(dev, val);
+ return drm_atomic_set_crtc_for_plane(state, crtc);
+ } else if (property == config->prop_crtc_x) {
+ state->crtc_x = U642I64(val);
+ } else if (property == config->prop_crtc_y) {
+ state->crtc_y = U642I64(val);
+ } else if (property == config->prop_crtc_w) {
+ state->crtc_w = val;
+ } else if (property == config->prop_crtc_h) {
+ state->crtc_h = val;
+ } else if (property == config->prop_src_x) {
+ state->src_x = val;
+ } else if (property == config->prop_src_y) {
+ state->src_y = val;
+ } else if (property == config->prop_src_w) {
+ state->src_w = val;
+ } else if (property == config->prop_src_h) {
+ state->src_h = val;
+ } else if (property == config->rotation_property) {
+ state->rotation = val;
+ } else if (plane->funcs->atomic_set_property) {
+ return plane->funcs->atomic_set_property(plane, state,
+ property, val);
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_atomic_plane_set_property);
+
+/*
+ * This function handles generic/core properties and calls out to
+ * driver's ->atomic_get_property() for driver properties. To ensure
+ * consistent behavior you must call this function rather than the
+ * driver hook directly.
+ */
+static int
+drm_atomic_plane_get_property(struct drm_plane *plane,
+ const struct drm_plane_state *state,
+ struct drm_property *property, uint64_t *val)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+
+ if (property == config->prop_fb_id) {
+ *val = (state->fb) ? state->fb->base.id : 0;
+ } else if (property == config->prop_crtc_id) {
+ *val = (state->crtc) ? state->crtc->base.id : 0;
+ } else if (property == config->prop_crtc_x) {
+ *val = I642U64(state->crtc_x);
+ } else if (property == config->prop_crtc_y) {
+ *val = I642U64(state->crtc_y);
+ } else if (property == config->prop_crtc_w) {
+ *val = state->crtc_w;
+ } else if (property == config->prop_crtc_h) {
+ *val = state->crtc_h;
+ } else if (property == config->prop_src_x) {
+ *val = state->src_x;
+ } else if (property == config->prop_src_y) {
+ *val = state->src_y;
+ } else if (property == config->prop_src_w) {
+ *val = state->src_w;
+ } else if (property == config->prop_src_h) {
+ *val = state->src_h;
+ } else if (plane->funcs->atomic_get_property) {
+ return plane->funcs->atomic_get_property(plane, state, property, val);
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * drm_atomic_plane_check - check plane state
+ * @plane: plane to check
+ * @state: plane state to check
+ *
+ * Provides core sanity checks for plane state.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+static int drm_atomic_plane_check(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ unsigned int fb_width, fb_height;
+ unsigned int i;
+
+ /* either *both* CRTC and FB must be set, or neither */
+ if (WARN_ON(state->crtc && !state->fb)) {
+ DRM_DEBUG_KMS("CRTC set but no FB\n");
+ return -EINVAL;
+ } else if (WARN_ON(state->fb && !state->crtc)) {
+ DRM_DEBUG_KMS("FB set but no CRTC\n");
+ return -EINVAL;
+ }
+
+ /* if disabled, we don't care about the rest of the state: */
+ if (!state->crtc)
+ return 0;
+
+ /* Check whether this plane is usable on this CRTC */
+ if (!(plane->possible_crtcs & drm_crtc_mask(state->crtc))) {
+ DRM_DEBUG_KMS("Invalid crtc for plane\n");
+ return -EINVAL;
+ }
+
+ /* Check whether this plane supports the fb pixel format. */
+ for (i = 0; i < plane->format_count; i++)
+ if (state->fb->pixel_format == plane->format_types[i])
+ break;
+ if (i == plane->format_count) {
+ DRM_DEBUG_KMS("Invalid pixel format %s\n",
+ drm_get_format_name(state->fb->pixel_format));
+ return -EINVAL;
+ }
+
+ /* Give drivers some help against integer overflows */
+ if (state->crtc_w > INT_MAX ||
+ state->crtc_x > INT_MAX - (int32_t) state->crtc_w ||
+ state->crtc_h > INT_MAX ||
+ state->crtc_y > INT_MAX - (int32_t) state->crtc_h) {
+ DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
+ state->crtc_w, state->crtc_h,
+ state->crtc_x, state->crtc_y);
+ return -ERANGE;
+ }
+
+ fb_width = state->fb->width << 16;
+ fb_height = state->fb->height << 16;
+
+ /* Make sure source coordinates are inside the fb. */
+ if (state->src_w > fb_width ||
+ state->src_x > fb_width - state->src_w ||
+ state->src_h > fb_height ||
+ state->src_y > fb_height - state->src_h) {
+ DRM_DEBUG_KMS("Invalid source coordinates "
+ "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
+ state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10,
+ state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10,
+ state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10,
+ state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10);
+ return -ENOSPC;
+ }
+
+ return 0;
+}
+
/**
* drm_atomic_get_connector_state - get connector state
* @state: global atomic state object
}
EXPORT_SYMBOL(drm_atomic_get_connector_state);
+/**
+ * drm_atomic_connector_set_property - set property on connector.
+ * @connector: the drm connector to set a property on
+ * @state: the state object to update with the new property value
+ * @property: the property to set
+ * @val: the new property value
+ *
+ * Use this instead of calling connector->atomic_set_property directly.
+ * This function handles generic/core properties and calls out to
+ * driver's ->atomic_set_property() for driver properties. To ensure
+ * consistent behavior you must call this function rather than the
+ * driver hook directly.
+ *
+ * RETURNS:
+ * Zero on success, error code on failure
+ */
+int drm_atomic_connector_set_property(struct drm_connector *connector,
+ struct drm_connector_state *state, struct drm_property *property,
+ uint64_t val)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+
+ if (property == config->prop_crtc_id) {
+ struct drm_crtc *crtc = drm_crtc_find(dev, val);
+ return drm_atomic_set_crtc_for_connector(state, crtc);
+ } else if (property == config->dpms_property) {
+ /* setting DPMS property requires special handling, which
+ * is done in legacy setprop path for us. Disallow (for
+ * now?) atomic writes to DPMS property:
+ */
+ return -EINVAL;
+ } else if (connector->funcs->atomic_set_property) {
+ return connector->funcs->atomic_set_property(connector,
+ state, property, val);
+ } else {
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL(drm_atomic_connector_set_property);
+
+/*
+ * This function handles generic/core properties and calls out to
+ * driver's ->atomic_get_property() for driver properties. To ensure
+ * consistent behavior you must call this function rather than the
+ * driver hook directly.
+ */
+static int
+drm_atomic_connector_get_property(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property, uint64_t *val)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+
+ if (property == config->prop_crtc_id) {
+ *val = (state->crtc) ? state->crtc->base.id : 0;
+ } else if (property == config->dpms_property) {
+ *val = connector->dpms;
+ } else if (connector->funcs->atomic_get_property) {
+ return connector->funcs->atomic_get_property(connector,
+ state, property, val);
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int drm_atomic_get_property(struct drm_mode_object *obj,
+ struct drm_property *property, uint64_t *val)
+{
+ struct drm_device *dev = property->dev;
+ int ret;
+
+ switch (obj->type) {
+ case DRM_MODE_OBJECT_CONNECTOR: {
+ struct drm_connector *connector = obj_to_connector(obj);
+ WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
+ ret = drm_atomic_connector_get_property(connector,
+ connector->state, property, val);
+ break;
+ }
+ case DRM_MODE_OBJECT_CRTC: {
+ struct drm_crtc *crtc = obj_to_crtc(obj);
+ WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
+ ret = drm_atomic_crtc_get_property(crtc,
+ crtc->state, property, val);
+ break;
+ }
+ case DRM_MODE_OBJECT_PLANE: {
+ struct drm_plane *plane = obj_to_plane(obj);
+ WARN_ON(!drm_modeset_is_locked(&plane->mutex));
+ ret = drm_atomic_plane_get_property(plane,
+ plane->state, property, val);
+ break;
+ }
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
/**
* drm_atomic_set_crtc_for_plane - set crtc for plane
- * @state: the incoming atomic state
- * @plane: the plane whose incoming state to update
+ * @plane_state: the plane whose incoming state to update
* @crtc: crtc to use for the plane
*
* Changing the assigned crtc for a plane requires us to grab the lock and state
* sequence must be restarted. All other errors are fatal.
*/
int
-drm_atomic_set_crtc_for_plane(struct drm_atomic_state *state,
- struct drm_plane *plane, struct drm_crtc *crtc)
+drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state,
+ struct drm_crtc *crtc)
{
- struct drm_plane_state *plane_state =
- drm_atomic_get_plane_state(state, plane);
+ struct drm_plane *plane = plane_state->plane;
struct drm_crtc_state *crtc_state;
- if (WARN_ON(IS_ERR(plane_state)))
- return PTR_ERR(plane_state);
-
if (plane_state->crtc) {
crtc_state = drm_atomic_get_crtc_state(plane_state->state,
plane_state->crtc);
*/
int drm_atomic_check_only(struct drm_atomic_state *state)
{
- struct drm_mode_config *config = &state->dev->mode_config;
+ struct drm_device *dev = state->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+ int nplanes = config->num_total_plane;
+ int ncrtcs = config->num_crtc;
+ int i, ret = 0;
DRM_DEBUG_KMS("checking %p\n", state);
+ for (i = 0; i < nplanes; i++) {
+ struct drm_plane *plane = state->planes[i];
+
+ if (!plane)
+ continue;
+
+ ret = drm_atomic_plane_check(plane, state->plane_states[i]);
+ if (ret) {
+ DRM_DEBUG_KMS("[PLANE:%d] atomic core check failed\n",
+ plane->base.id);
+ return ret;
+ }
+ }
+
+ for (i = 0; i < ncrtcs; i++) {
+ struct drm_crtc *crtc = state->crtcs[i];
+
+ if (!crtc)
+ continue;
+
+ ret = drm_atomic_crtc_check(crtc, state->crtc_states[i]);
+ if (ret) {
+ DRM_DEBUG_KMS("[CRTC:%d] atomic core check failed\n",
+ crtc->base.id);
+ return ret;
+ }
+ }
+
if (config->funcs->atomic_check)
- return config->funcs->atomic_check(state->dev, state);
- else
- return 0;
+ ret = config->funcs->atomic_check(state->dev, state);
+
+ if (!state->allow_modeset) {
+ for (i = 0; i < ncrtcs; i++) {
+ struct drm_crtc *crtc = state->crtcs[i];
+ struct drm_crtc_state *crtc_state = state->crtc_states[i];
+
+ if (!crtc)
+ continue;
+
+ if (crtc_state->mode_changed ||
+ crtc_state->active_changed) {
+ DRM_DEBUG_KMS("[CRTC:%d] requires full modeset\n",
+ crtc->base.id);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return ret;
}
EXPORT_SYMBOL(drm_atomic_check_only);
return config->funcs->atomic_commit(state->dev, state, true);
}
EXPORT_SYMBOL(drm_atomic_async_commit);
+
+/*
+ * The big monstor ioctl
+ */
+
+static struct drm_pending_vblank_event *create_vblank_event(
+ struct drm_device *dev, struct drm_file *file_priv, uint64_t user_data)
+{
+ struct drm_pending_vblank_event *e = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ if (file_priv->event_space < sizeof e->event) {
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ goto out;
+ }
+ file_priv->event_space -= sizeof e->event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ e = kzalloc(sizeof *e, GFP_KERNEL);
+ if (e == NULL) {
+ spin_lock_irqsave(&dev->event_lock, flags);
+ file_priv->event_space += sizeof e->event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ goto out;
+ }
+
+ e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
+ e->event.base.length = sizeof e->event;
+ e->event.user_data = user_data;
+ e->base.event = &e->event.base;
+ e->base.file_priv = file_priv;
+ e->base.destroy = (void (*) (struct drm_pending_event *)) kfree;
+
+out:
+ return e;
+}
+
+static void destroy_vblank_event(struct drm_device *dev,
+ struct drm_file *file_priv, struct drm_pending_vblank_event *e)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ file_priv->event_space += sizeof e->event;
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ kfree(e);
+}
+
+static int atomic_set_prop(struct drm_atomic_state *state,
+ struct drm_mode_object *obj, struct drm_property *prop,
+ uint64_t prop_value)
+{
+ struct drm_mode_object *ref;
+ int ret;
+
+ if (!drm_property_change_valid_get(prop, prop_value, &ref))
+ return -EINVAL;
+
+ switch (obj->type) {
+ case DRM_MODE_OBJECT_CONNECTOR: {
+ struct drm_connector *connector = obj_to_connector(obj);
+ struct drm_connector_state *connector_state;
+
+ connector_state = drm_atomic_get_connector_state(state, connector);
+ if (IS_ERR(connector_state)) {
+ ret = PTR_ERR(connector_state);
+ break;
+ }
+
+ ret = drm_atomic_connector_set_property(connector,
+ connector_state, prop, prop_value);
+ break;
+ }
+ case DRM_MODE_OBJECT_CRTC: {
+ struct drm_crtc *crtc = obj_to_crtc(obj);
+ struct drm_crtc_state *crtc_state;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state)) {
+ ret = PTR_ERR(crtc_state);
+ break;
+ }
+
+ ret = drm_atomic_crtc_set_property(crtc,
+ crtc_state, prop, prop_value);
+ break;
+ }
+ case DRM_MODE_OBJECT_PLANE: {
+ struct drm_plane *plane = obj_to_plane(obj);
+ struct drm_plane_state *plane_state;
+
+ plane_state = drm_atomic_get_plane_state(state, plane);
+ if (IS_ERR(plane_state)) {
+ ret = PTR_ERR(plane_state);
+ break;
+ }
+
+ ret = drm_atomic_plane_set_property(plane,
+ plane_state, prop, prop_value);
+ break;
+ }
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ drm_property_change_valid_put(prop, ref);
+ return ret;
+}
+
+int drm_mode_atomic_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv)
+{
+ struct drm_mode_atomic *arg = data;
+ uint32_t __user *objs_ptr = (uint32_t __user *)(unsigned long)(arg->objs_ptr);
+ uint32_t __user *count_props_ptr = (uint32_t __user *)(unsigned long)(arg->count_props_ptr);
+ uint32_t __user *props_ptr = (uint32_t __user *)(unsigned long)(arg->props_ptr);
+ uint64_t __user *prop_values_ptr = (uint64_t __user *)(unsigned long)(arg->prop_values_ptr);
+ unsigned int copied_objs, copied_props;
+ struct drm_atomic_state *state;
+ struct drm_modeset_acquire_ctx ctx;
+ struct drm_plane *plane;
+ unsigned plane_mask = 0;
+ int ret = 0;
+ unsigned int i, j;
+
+ /* disallow for drivers not supporting atomic: */
+ if (!drm_core_check_feature(dev, DRIVER_ATOMIC))
+ return -EINVAL;
+
+ /* disallow for userspace that has not enabled atomic cap (even
+ * though this may be a bit overkill, since legacy userspace
+ * wouldn't know how to call this ioctl)
+ */
+ if (!file_priv->atomic)
+ return -EINVAL;
+
+ if (arg->flags & ~DRM_MODE_ATOMIC_FLAGS)
+ return -EINVAL;
+
+ if (arg->reserved)
+ return -EINVAL;
+
+ if ((arg->flags & DRM_MODE_PAGE_FLIP_ASYNC) &&
+ !dev->mode_config.async_page_flip)
+ return -EINVAL;
+
+ /* can't test and expect an event at the same time. */
+ if ((arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) &&
+ (arg->flags & DRM_MODE_PAGE_FLIP_EVENT))
+ return -EINVAL;
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+ state = drm_atomic_state_alloc(dev);
+ if (!state)
+ return -ENOMEM;
+
+ state->acquire_ctx = &ctx;
+ state->allow_modeset = !!(arg->flags & DRM_MODE_ATOMIC_ALLOW_MODESET);
+
+retry:
+ copied_objs = 0;
+ copied_props = 0;
+
+ for (i = 0; i < arg->count_objs; i++) {
+ uint32_t obj_id, count_props;
+ struct drm_mode_object *obj;
+
+ if (get_user(obj_id, objs_ptr + copied_objs)) {
+ ret = -EFAULT;
+ goto fail;
+ }
+
+ obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_ANY);
+ if (!obj || !obj->properties) {
+ ret = -ENOENT;
+ goto fail;
+ }
+
+ if (obj->type == DRM_MODE_OBJECT_PLANE) {
+ plane = obj_to_plane(obj);
+ plane_mask |= (1 << drm_plane_index(plane));
+ plane->old_fb = plane->fb;
+ }
+
+ if (get_user(count_props, count_props_ptr + copied_objs)) {
+ ret = -EFAULT;
+ goto fail;
+ }
+
+ copied_objs++;
+
+ for (j = 0; j < count_props; j++) {
+ uint32_t prop_id;
+ uint64_t prop_value;
+ struct drm_property *prop;
+
+ if (get_user(prop_id, props_ptr + copied_props)) {
+ ret = -EFAULT;
+ goto fail;
+ }
+
+ prop = drm_property_find(dev, prop_id);
+ if (!prop) {
+ ret = -ENOENT;
+ goto fail;
+ }
+
+ if (copy_from_user(&prop_value,
+ prop_values_ptr + copied_props,
+ sizeof(prop_value))) {
+ ret = -EFAULT;
+ goto fail;
+ }
+
+ ret = atomic_set_prop(state, obj, prop, prop_value);
+ if (ret)
+ goto fail;
+
+ copied_props++;
+ }
+ }
+
+ if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
+ int ncrtcs = dev->mode_config.num_crtc;
+
+ for (i = 0; i < ncrtcs; i++) {
+ struct drm_crtc_state *crtc_state = state->crtc_states[i];
+ struct drm_pending_vblank_event *e;
+
+ if (!crtc_state)
+ continue;
+
+ e = create_vblank_event(dev, file_priv, arg->user_data);
+ if (!e) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ crtc_state->event = e;
+ }
+ }
+
+ if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) {
+ ret = drm_atomic_check_only(state);
+ /* _check_only() does not free state, unlike _commit() */
+ drm_atomic_state_free(state);
+ } else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) {
+ ret = drm_atomic_async_commit(state);
+ } else {
+ ret = drm_atomic_commit(state);
+ }
+
+ /* if succeeded, fixup legacy plane crtc/fb ptrs before dropping
+ * locks (ie. while it is still safe to deref plane->state). We
+ * need to do this here because the driver entry points cannot
+ * distinguish between legacy and atomic ioctls.
+ */
+ drm_for_each_plane_mask(plane, dev, plane_mask) {
+ if (ret == 0) {
+ struct drm_framebuffer *new_fb = plane->state->fb;
+ if (new_fb)
+ drm_framebuffer_reference(new_fb);
+ plane->fb = new_fb;
+ plane->crtc = plane->state->crtc;
+ } else {
+ plane->old_fb = NULL;
+ }
+ if (plane->old_fb) {
+ drm_framebuffer_unreference(plane->old_fb);
+ plane->old_fb = NULL;
+ }
+ }
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
+ return ret;
+
+fail:
+ if (ret == -EDEADLK)
+ goto backoff;
+
+ if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
+ int ncrtcs = dev->mode_config.num_crtc;
+
+ for (i = 0; i < ncrtcs; i++) {
+ struct drm_crtc_state *crtc_state = state->crtc_states[i];
+
+ if (!crtc_state)
+ continue;
+
+ destroy_vblank_event(dev, file_priv, crtc_state->event);
+ crtc_state->event = NULL;
+ }
+ }
+
+ drm_atomic_state_free(state);
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+
+ return ret;
+
+backoff:
+ drm_atomic_state_clear(state);
+ drm_modeset_backoff(&ctx);
+
+ goto retry;
+}
projects / karo-tx-linux.git / blobdiff