return intel_dig_port->base.type == INTEL_OUTPUT_EDP;
}
-/**
- * is_pch_edp - is the port on the PCH and attached to an eDP panel?
- * @intel_dp: DP struct
- *
- * Returns true if the given DP struct corresponds to a PCH DP port attached
- * to an eDP panel, false otherwise. Helpful for determining whether we
- * may need FDI resources for a given DP output or not.
- */
-static bool is_pch_edp(struct intel_dp *intel_dp)
-{
- return intel_dp->is_pch_edp;
-}
-
-/**
- * is_cpu_edp - is the port on the CPU and attached to an eDP panel?
- * @intel_dp: DP struct
- *
- * Returns true if the given DP struct corresponds to a CPU eDP port.
- */
-static bool is_cpu_edp(struct intel_dp *intel_dp)
-{
- return is_edp(intel_dp) && !is_pch_edp(intel_dp);
-}
-
static struct drm_device *intel_dp_to_dev(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
return enc_to_intel_dp(&intel_attached_encoder(connector)->base);
}
-/**
- * intel_encoder_is_pch_edp - is the given encoder a PCH attached eDP?
- * @encoder: DRM encoder
- *
- * Return true if @encoder corresponds to a PCH attached eDP panel. Needed
- * by intel_display.c.
- */
-bool intel_encoder_is_pch_edp(struct drm_encoder *encoder)
-{
- struct intel_dp *intel_dp;
-
- if (!encoder)
- return false;
-
- intel_dp = enc_to_intel_dp(encoder);
-
- return is_pch_edp(intel_dp);
-}
-
static void intel_dp_link_down(struct intel_dp *intel_dp);
static int
* Note that PCH attached eDP panels should use a 125MHz input
* clock divider.
*/
- if (is_cpu_edp(intel_dp)) {
+ if (IS_VALLEYVIEW(dev)) {
+ aux_clock_divider = 100;
+ } else if (intel_dig_port->port == PORT_A) {
if (HAS_DDI(dev))
- aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1;
- else if (IS_VALLEYVIEW(dev))
- aux_clock_divider = 100;
+ aux_clock_divider = DIV_ROUND_CLOSEST(
+ intel_ddi_get_cdclk_freq(dev_priv), 2000);
else if (IS_GEN6(dev) || IS_GEN7(dev))
aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */
else
return ret;
}
+static void
+intel_dp_set_clock(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config, int link_bw)
+{
+ struct drm_device *dev = encoder->base.dev;
+
+ if (IS_G4X(dev)) {
+ if (link_bw == DP_LINK_BW_1_62) {
+ pipe_config->dpll.p1 = 2;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.n = 2;
+ pipe_config->dpll.m1 = 23;
+ pipe_config->dpll.m2 = 8;
+ } else {
+ pipe_config->dpll.p1 = 1;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.n = 1;
+ pipe_config->dpll.m1 = 14;
+ pipe_config->dpll.m2 = 2;
+ }
+ pipe_config->clock_set = true;
+ } else if (IS_HASWELL(dev)) {
+ /* Haswell has special-purpose DP DDI clocks. */
+ } else if (HAS_PCH_SPLIT(dev)) {
+ if (link_bw == DP_LINK_BW_1_62) {
+ pipe_config->dpll.n = 1;
+ pipe_config->dpll.p1 = 2;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.m1 = 12;
+ pipe_config->dpll.m2 = 9;
+ } else {
+ pipe_config->dpll.n = 2;
+ pipe_config->dpll.p1 = 1;
+ pipe_config->dpll.p2 = 10;
+ pipe_config->dpll.m1 = 14;
+ pipe_config->dpll.m2 = 8;
+ }
+ pipe_config->clock_set = true;
+ } else if (IS_VALLEYVIEW(dev)) {
+ /* FIXME: Need to figure out optimized DP clocks for vlv. */
+ }
+}
+
bool
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
- struct drm_display_mode *mode = &pipe_config->requested_mode;
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ enum port port = dp_to_dig_port(intel_dp)->port;
+ struct intel_crtc *intel_crtc = encoder->new_crtc;
struct intel_connector *intel_connector = intel_dp->attached_connector;
int lane_count, clock;
int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
int bpp, mode_rate;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
- int target_clock, link_avail, link_clock;
+ int link_avail, link_clock;
- if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && !is_cpu_edp(intel_dp))
+ if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
pipe_config->has_pch_encoder = true;
pipe_config->has_dp_encoder = true;
if (is_edp(intel_dp) && intel_connector->panel.fixed_mode) {
intel_fixed_panel_mode(intel_connector->panel.fixed_mode,
adjusted_mode);
- intel_pch_panel_fitting(dev,
- intel_connector->panel.fitting_mode,
- mode, adjusted_mode);
+ if (!HAS_PCH_SPLIT(dev))
+ intel_gmch_panel_fitting(intel_crtc, pipe_config,
+ intel_connector->panel.fitting_mode);
+ else
+ intel_pch_panel_fitting(intel_crtc, pipe_config,
+ intel_connector->panel.fitting_mode);
}
- /* We need to take the panel's fixed mode into account. */
- target_clock = adjusted_mode->clock;
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
return false;
/* Walk through all bpp values. Luckily they're all nicely spaced with 2
* bpc in between. */
- bpp = min_t(int, 8*3, pipe_config->pipe_bpp);
- if (is_edp(intel_dp) && dev_priv->edp.bpp)
- bpp = min_t(int, bpp, dev_priv->edp.bpp);
+ bpp = pipe_config->pipe_bpp;
+ if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp)
+ bpp = min_t(int, bpp, dev_priv->vbt.edp_bpp);
for (; bpp >= 6*3; bpp -= 2*3) {
- mode_rate = intel_dp_link_required(target_clock, bpp);
+ mode_rate = intel_dp_link_required(adjusted_mode->clock, bpp);
for (clock = 0; clock <= max_clock; clock++) {
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
- adjusted_mode->clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
pipe_config->pipe_bpp = bpp;
- pipe_config->pixel_target_clock = target_clock;
+ pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
intel_dp->link_bw, intel_dp->lane_count,
- adjusted_mode->clock, bpp);
+ pipe_config->port_clock, bpp);
DRM_DEBUG_KMS("DP link bw required %i available %i\n",
mode_rate, link_avail);
intel_link_compute_m_n(bpp, lane_count,
- target_clock, adjusted_mode->clock,
+ adjusted_mode->clock, pipe_config->port_clock,
&pipe_config->dp_m_n);
+ intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
+
return true;
}
}
}
-static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+static void ironlake_set_pll_cpu_edp(struct intel_dp *intel_dp)
{
- struct drm_device *dev = crtc->dev;
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 dpa_ctl;
- DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+ DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", crtc->config.port_clock);
dpa_ctl = I915_READ(DP_A);
dpa_ctl &= ~DP_PLL_FREQ_MASK;
- if (clock < 200000) {
+ if (crtc->config.port_clock == 162000) {
/* For a long time we've carried around a ILK-DevA w/a for the
* 160MHz clock. If we're really unlucky, it's still required.
*/
DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ intel_dp->DP |= DP_PLL_FREQ_160MHZ;
} else {
dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ intel_dp->DP |= DP_PLL_FREQ_270MHZ;
}
I915_WRITE(DP_A, dpa_ctl);
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- struct drm_crtc *crtc = encoder->crtc;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum port port = dp_to_dig_port(intel_dp)->port;
+ struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
/*
* There are four kinds of DP registers:
/* Handle DP bits in common between all three register formats */
intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
+ intel_dp->DP |= DP_PORT_WIDTH(intel_dp->lane_count);
- switch (intel_dp->lane_count) {
- case 1:
- intel_dp->DP |= DP_PORT_WIDTH_1;
- break;
- case 2:
- intel_dp->DP |= DP_PORT_WIDTH_2;
- break;
- case 4:
- intel_dp->DP |= DP_PORT_WIDTH_4;
- break;
- }
if (intel_dp->has_audio) {
DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
- pipe_name(intel_crtc->pipe));
+ pipe_name(crtc->pipe));
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
intel_write_eld(encoder, adjusted_mode);
}
/* Split out the IBX/CPU vs CPT settings */
- if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
+ if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
intel_dp->DP |= DP_SYNC_HS_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
intel_dp->DP |= DP_ENHANCED_FRAMING;
- intel_dp->DP |= intel_crtc->pipe << 29;
-
- /* don't miss out required setting for eDP */
- if (adjusted_mode->clock < 200000)
- intel_dp->DP |= DP_PLL_FREQ_160MHZ;
- else
- intel_dp->DP |= DP_PLL_FREQ_270MHZ;
- } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+ intel_dp->DP |= crtc->pipe << 29;
+ } else if (!HAS_PCH_CPT(dev) || port == PORT_A) {
if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev))
intel_dp->DP |= intel_dp->color_range;
if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
intel_dp->DP |= DP_ENHANCED_FRAMING;
- if (intel_crtc->pipe == 1)
+ if (crtc->pipe == 1)
intel_dp->DP |= DP_PIPEB_SELECT;
-
- if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
- /* don't miss out required setting for eDP */
- if (adjusted_mode->clock < 200000)
- intel_dp->DP |= DP_PLL_FREQ_160MHZ;
- else
- intel_dp->DP |= DP_PLL_FREQ_270MHZ;
- }
} else {
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
- if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev))
- ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+ if (port == PORT_A && !IS_VALLEYVIEW(dev))
+ ironlake_set_pll_cpu_edp(intel_dp);
}
#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
enum pipe *pipe)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ enum port port = dp_to_dig_port(intel_dp)->port;
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 tmp = I915_READ(intel_dp->output_reg);
if (!(tmp & DP_PORT_EN))
return false;
- if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
+ if (port == PORT_A && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
*pipe = PORT_TO_PIPE_CPT(tmp);
- } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+ } else if (!HAS_PCH_CPT(dev) || port == PORT_A) {
*pipe = PORT_TO_PIPE(tmp);
} else {
u32 trans_sel;
return true;
}
+static void intel_dp_get_config(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config)
+{
+ struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ u32 tmp, flags = 0;
+
+ tmp = I915_READ(intel_dp->output_reg);
+
+ if (tmp & DP_SYNC_HS_HIGH)
+ flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (tmp & DP_SYNC_VS_HIGH)
+ flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ flags |= DRM_MODE_FLAG_NVSYNC;
+
+ pipe_config->adjusted_mode.flags |= flags;
+}
+
static void intel_disable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ enum port port = dp_to_dig_port(intel_dp)->port;
+ struct drm_device *dev = encoder->base.dev;
/* Make sure the panel is off before trying to change the mode. But also
* ensure that we have vdd while we switch off the panel. */
ironlake_edp_panel_off(intel_dp);
/* cpu edp my only be disable _after_ the cpu pipe/plane is disabled. */
- if (!is_cpu_edp(intel_dp))
+ if (!(port == PORT_A || IS_VALLEYVIEW(dev)))
intel_dp_link_down(intel_dp);
}
static void intel_post_disable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ enum port port = dp_to_dig_port(intel_dp)->port;
struct drm_device *dev = encoder->base.dev;
- if (is_cpu_edp(intel_dp)) {
+ if (port == PORT_A || IS_VALLEYVIEW(dev)) {
intel_dp_link_down(intel_dp);
if (!IS_VALLEYVIEW(dev))
ironlake_edp_pll_off(intel_dp);
intel_dp_complete_link_train(intel_dp);
intel_dp_stop_link_train(intel_dp);
ironlake_edp_backlight_on(intel_dp);
+
+ if (IS_VALLEYVIEW(dev)) {
+ struct intel_digital_port *dport =
+ enc_to_dig_port(&encoder->base);
+ int channel = vlv_dport_to_channel(dport);
+
+ vlv_wait_port_ready(dev_priv, channel);
+ }
}
static void intel_pre_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+ struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
- if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev))
+ if (dport->port == PORT_A && !IS_VALLEYVIEW(dev))
ironlake_edp_pll_on(intel_dp);
+
+ if (IS_VALLEYVIEW(dev)) {
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(encoder->base.crtc);
+ int port = vlv_dport_to_channel(dport);
+ int pipe = intel_crtc->pipe;
+ u32 val;
+
+ val = vlv_dpio_read(dev_priv, DPIO_DATA_LANE_A(port));
+ val = 0;
+ if (pipe)
+ val |= (1<<21);
+ else
+ val &= ~(1<<21);
+ val |= 0x001000c4;
+ vlv_dpio_write(dev_priv, DPIO_DATA_CHANNEL(port), val);
+
+ vlv_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF0(port),
+ 0x00760018);
+ vlv_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF8(port),
+ 0x00400888);
+ }
+}
+
+static void intel_dp_pre_pll_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int port = vlv_dport_to_channel(dport);
+
+ if (!IS_VALLEYVIEW(dev))
+ return;
+
+ /* Program Tx lane resets to default */
+ vlv_dpio_write(dev_priv, DPIO_PCS_TX(port),
+ DPIO_PCS_TX_LANE2_RESET |
+ DPIO_PCS_TX_LANE1_RESET);
+ vlv_dpio_write(dev_priv, DPIO_PCS_CLK(port),
+ DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
+ DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
+ (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
+ DPIO_PCS_CLK_SOFT_RESET);
+
+ /* Fix up inter-pair skew failure */
+ vlv_dpio_write(dev_priv, DPIO_PCS_STAGGER1(port), 0x00750f00);
+ vlv_dpio_write(dev_priv, DPIO_TX_CTL(port), 0x00001500);
+ vlv_dpio_write(dev_priv, DPIO_TX_LANE(port), 0x40400000);
}
/*
intel_dp_voltage_max(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ enum port port = dp_to_dig_port(intel_dp)->port;
- if (IS_GEN7(dev) && is_cpu_edp(intel_dp))
+ if (IS_VALLEYVIEW(dev))
+ return DP_TRAIN_VOLTAGE_SWING_1200;
+ else if (IS_GEN7(dev) && port == PORT_A)
return DP_TRAIN_VOLTAGE_SWING_800;
- else if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ else if (HAS_PCH_CPT(dev) && port != PORT_A)
return DP_TRAIN_VOLTAGE_SWING_1200;
else
return DP_TRAIN_VOLTAGE_SWING_800;
intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ enum port port = dp_to_dig_port(intel_dp)->port;
if (HAS_DDI(dev)) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
default:
return DP_TRAIN_PRE_EMPHASIS_0;
}
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+ } else if (IS_VALLEYVIEW(dev)) {
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_9_5;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
+ } else if (IS_GEN7(dev) && port == PORT_A) {
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_400:
return DP_TRAIN_PRE_EMPHASIS_6;
}
}
+static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
+ unsigned long demph_reg_value, preemph_reg_value,
+ uniqtranscale_reg_value;
+ uint8_t train_set = intel_dp->train_set[0];
+ int port = vlv_dport_to_channel(dport);
+
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
+ case DP_TRAIN_PRE_EMPHASIS_0:
+ preemph_reg_value = 0x0004000;
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ demph_reg_value = 0x2B405555;
+ uniqtranscale_reg_value = 0x552AB83A;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ demph_reg_value = 0x2B404040;
+ uniqtranscale_reg_value = 0x5548B83A;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ demph_reg_value = 0x2B245555;
+ uniqtranscale_reg_value = 0x5560B83A;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ demph_reg_value = 0x2B405555;
+ uniqtranscale_reg_value = 0x5598DA3A;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_3_5:
+ preemph_reg_value = 0x0002000;
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ demph_reg_value = 0x2B404040;
+ uniqtranscale_reg_value = 0x5552B83A;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ demph_reg_value = 0x2B404848;
+ uniqtranscale_reg_value = 0x5580B83A;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ demph_reg_value = 0x2B404040;
+ uniqtranscale_reg_value = 0x55ADDA3A;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_6:
+ preemph_reg_value = 0x0000000;
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ demph_reg_value = 0x2B305555;
+ uniqtranscale_reg_value = 0x5570B83A;
+ break;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ demph_reg_value = 0x2B2B4040;
+ uniqtranscale_reg_value = 0x55ADDA3A;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case DP_TRAIN_PRE_EMPHASIS_9_5:
+ preemph_reg_value = 0x0006000;
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ demph_reg_value = 0x1B405555;
+ uniqtranscale_reg_value = 0x55ADDA3A;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ default:
+ return 0;
+ }
+
+ vlv_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0x00000000);
+ vlv_dpio_write(dev_priv, DPIO_TX_SWING_CTL4(port), demph_reg_value);
+ vlv_dpio_write(dev_priv, DPIO_TX_SWING_CTL2(port),
+ uniqtranscale_reg_value);
+ vlv_dpio_write(dev_priv, DPIO_TX_SWING_CTL3(port), 0x0C782040);
+ vlv_dpio_write(dev_priv, DPIO_PCS_STAGGER0(port), 0x00030000);
+ vlv_dpio_write(dev_priv, DPIO_PCS_CTL_OVER1(port), preemph_reg_value);
+ vlv_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0x80000000);
+
+ return 0;
+}
+
static void
intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
{
intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ enum port port = intel_dig_port->port;
struct drm_device *dev = intel_dig_port->base.base.dev;
uint32_t signal_levels, mask;
uint8_t train_set = intel_dp->train_set[0];
if (HAS_DDI(dev)) {
signal_levels = intel_hsw_signal_levels(train_set);
mask = DDI_BUF_EMP_MASK;
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+ } else if (IS_VALLEYVIEW(dev)) {
+ signal_levels = intel_vlv_signal_levels(intel_dp);
+ mask = 0;
+ } else if (IS_GEN7(dev) && port == PORT_A) {
signal_levels = intel_gen7_edp_signal_levels(train_set);
mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+ } else if (IS_GEN6(dev) && port == PORT_A) {
signal_levels = intel_gen6_edp_signal_levels(train_set);
mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
} else {
}
I915_WRITE(DP_TP_CTL(port), temp);
- } else if (HAS_PCH_CPT(dev) &&
- (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
+ } else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
dp_reg_value &= ~DP_LINK_TRAIN_MASK_CPT;
switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
intel_dp_link_down(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ enum port port = intel_dig_port->port;
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
DRM_DEBUG_KMS("\n");
- if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
+ if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
DP &= ~DP_LINK_TRAIN_MASK_CPT;
I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
} else {
return NULL;
size = (intel_connector->edid->extensions + 1) * EDID_LENGTH;
- edid = kmalloc(size, GFP_KERNEL);
+ edid = kmemdup(intel_connector->edid, size, GFP_KERNEL);
if (!edid)
return NULL;
- memcpy(edid, intel_connector->edid, size);
return edid;
}
struct child_device_config *p_child;
int i;
- if (!dev_priv->child_dev_num)
+ if (!dev_priv->vbt.child_dev_num)
return false;
- for (i = 0; i < dev_priv->child_dev_num; i++) {
- p_child = dev_priv->child_dev + i;
+ for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
+ p_child = dev_priv->vbt.child_dev + i;
if (p_child->dvo_port == PORT_IDPD &&
p_child->device_type == DEVICE_TYPE_eDP)
DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
- vbt = dev_priv->edp.pps;
+ vbt = dev_priv->vbt.edp_pps;
/* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
* our hw here, which are all in 100usec. */
pp_div_reg = PIPEA_PP_DIVISOR;
}
- if (IS_VALLEYVIEW(dev))
- port_sel = I915_READ(pp_on_reg) & 0xc0000000;
-
/* And finally store the new values in the power sequencer. */
pp_on = (seq->t1_t3 << PANEL_POWER_UP_DELAY_SHIFT) |
(seq->t8 << PANEL_LIGHT_ON_DELAY_SHIFT);
/* Haswell doesn't have any port selection bits for the panel
* power sequencer any more. */
- if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
- if (is_cpu_edp(intel_dp))
+ if (IS_VALLEYVIEW(dev)) {
+ port_sel = I915_READ(pp_on_reg) & 0xc0000000;
+ } else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
+ if (dp_to_dig_port(intel_dp)->port == PORT_A)
port_sel = PANEL_POWER_PORT_DP_A;
else
port_sel = PANEL_POWER_PORT_DP_D;
intel_dp->DP = I915_READ(intel_dp->output_reg);
intel_dp->attached_connector = intel_connector;
- if (HAS_PCH_SPLIT(dev) && port == PORT_D)
- if (intel_dpd_is_edp(dev))
- intel_dp->is_pch_edp = true;
-
+ type = DRM_MODE_CONNECTOR_DisplayPort;
/*
* FIXME : We need to initialize built-in panels before external panels.
* For X0, DP_C is fixed as eDP. Revisit this as part of VLV eDP cleanup
*/
- if (IS_VALLEYVIEW(dev) && port == PORT_C) {
- type = DRM_MODE_CONNECTOR_eDP;
- intel_encoder->type = INTEL_OUTPUT_EDP;
- } else if (port == PORT_A || is_pch_edp(intel_dp)) {
+ switch (port) {
+ case PORT_A:
type = DRM_MODE_CONNECTOR_eDP;
- intel_encoder->type = INTEL_OUTPUT_EDP;
- } else {
- /* The intel_encoder->type value may be INTEL_OUTPUT_UNKNOWN for
- * DDI or INTEL_OUTPUT_DISPLAYPORT for the older gens, so don't
- * rewrite it.
- */
- type = DRM_MODE_CONNECTOR_DisplayPort;
+ break;
+ case PORT_C:
+ if (IS_VALLEYVIEW(dev))
+ type = DRM_MODE_CONNECTOR_eDP;
+ break;
+ case PORT_D:
+ if (HAS_PCH_SPLIT(dev) && intel_dpd_is_edp(dev))
+ type = DRM_MODE_CONNECTOR_eDP;
+ break;
+ default: /* silence GCC warning */
+ break;
}
+ /*
+ * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
+ * for DP the encoder type can be set by the caller to
+ * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
+ */
+ if (type == DRM_MODE_CONNECTOR_eDP)
+ intel_encoder->type = INTEL_OUTPUT_EDP;
+
+ DRM_DEBUG_KMS("Adding %s connector on port %c\n",
+ type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
+ port_name(port));
+
drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
}
/* fallback to VBT if available for eDP */
- if (!fixed_mode && dev_priv->lfp_lvds_vbt_mode) {
- fixed_mode = drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+ if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) {
+ fixed_mode = drm_mode_duplicate(dev, dev_priv->vbt.lfp_lvds_vbt_mode);
if (fixed_mode)
fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
}
intel_encoder->disable = intel_disable_dp;
intel_encoder->post_disable = intel_post_disable_dp;
intel_encoder->get_hw_state = intel_dp_get_hw_state;
+ intel_encoder->get_config = intel_dp_get_config;
+ if (IS_VALLEYVIEW(dev))
+ intel_encoder->pre_pll_enable = intel_dp_pre_pll_enable;
intel_dig_port->port = port;
intel_dig_port->dp.output_reg = output_reg;
projects / karo-tx-linux.git / blobdiff