/*
* Linux ARCnet driver - COM20020 PCMCIA support
- *
+ *
* Written 1994-1999 by Avery Pennarun,
* based on an ISA version by David Woodhouse.
* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
* Director, National Security Agency. This software may only be used
* and distributed according to the terms of the GNU General Public License as
* modified by SRC, incorporated herein by reference.
- *
+ *
* **********************
* Changes:
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
* - reorganize kmallocs in com20020_attach, checking all for failure
* and releasing the previous allocations if one fails
* **********************
- *
+ *
* For more details, see drivers/net/arcnet.c
*
* **********************
*/
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/netdevice.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
-
+#include <linux/io.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
-#include <asm/io.h>
-
-#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
-
+#include "arcdevice.h"
+#include "com20020.h"
static void regdump(struct net_device *dev)
{
#ifdef DEBUG
- int ioaddr = dev->base_addr;
- int count;
-
- netdev_dbg(dev, "register dump:\n");
- for (count = ioaddr; count < ioaddr + 16; count++)
- {
- if (!(count % 16))
- pr_cont("%04X:", count);
- pr_cont(" %02X", inb(count));
- }
- pr_cont("\n");
-
- netdev_dbg(dev, "buffer0 dump:\n");
+ int ioaddr = dev->base_addr;
+ int count;
+
+ netdev_dbg(dev, "register dump:\n");
+ for (count = 0; count < 16; count++) {
+ if (!(count % 16))
+ pr_cont("%04X:", ioaddr + count);
+ pr_cont(" %02X", arcnet_inb(ioaddr, count));
+ }
+ pr_cont("\n");
+
+ netdev_dbg(dev, "buffer0 dump:\n");
/* set up the address register */
- count = 0;
- outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
- outb(count & 0xff, _ADDR_LO);
-
- for (count = 0; count < 256+32; count++)
- {
- if (!(count % 16))
- pr_cont("%04X:", count);
-
- /* copy the data */
- pr_cont(" %02X", inb(_MEMDATA));
- }
- pr_cont("\n");
-#endif
-}
+ count = 0;
+ arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag,
+ ioaddr, com20020_REG_W_ADDR_HI);
+ arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
+ for (count = 0; count < 256 + 32; count++) {
+ if (!(count % 16))
+ pr_cont("%04X:", count);
+ /* copy the data */
+ pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA));
+ }
+ pr_cont("\n");
+#endif
+}
/*====================================================================*/
static int com20020_probe(struct pcmcia_device *p_dev)
{
- struct com20020_dev *info;
- struct net_device *dev;
- struct arcnet_local *lp;
+ struct com20020_dev *info;
+ struct net_device *dev;
+ struct arcnet_local *lp;
- dev_dbg(&p_dev->dev, "com20020_attach()\n");
+ dev_dbg(&p_dev->dev, "com20020_attach()\n");
- /* Create new network device */
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto fail_alloc_info;
+ /* Create new network device */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ goto fail_alloc_info;
- dev = alloc_arcdev("");
- if (!dev)
- goto fail_alloc_dev;
+ dev = alloc_arcdev("");
+ if (!dev)
+ goto fail_alloc_dev;
- lp = netdev_priv(dev);
- lp->timeout = timeout;
- lp->backplane = backplane;
- lp->clockp = clockp;
- lp->clockm = clockm & 3;
- lp->hw.owner = THIS_MODULE;
+ lp = netdev_priv(dev);
+ lp->timeout = timeout;
+ lp->backplane = backplane;
+ lp->clockp = clockp;
+ lp->clockm = clockm & 3;
+ lp->hw.owner = THIS_MODULE;
- /* fill in our module parameters as defaults */
- dev->dev_addr[0] = node;
+ /* fill in our module parameters as defaults */
+ dev->dev_addr[0] = node;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->resource[0]->end = 16;
- p_dev->config_flags |= CONF_ENABLE_IRQ;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
- info->dev = dev;
- p_dev->priv = info;
+ info->dev = dev;
+ p_dev->priv = info;
- return com20020_config(p_dev);
+ return com20020_config(p_dev);
fail_alloc_dev:
- kfree(info);
+ kfree(info);
fail_alloc_info:
- return -ENOMEM;
+ return -ENOMEM;
} /* com20020_attach */
static void com20020_detach(struct pcmcia_device *link)
{
- struct com20020_dev *info = link->priv;
- struct net_device *dev = info->dev;
+ struct com20020_dev *info = link->priv;
+ struct net_device *dev = info->dev;
- dev_dbg(&link->dev, "detach...\n");
+ dev_dbg(&link->dev, "detach...\n");
- dev_dbg(&link->dev, "com20020_detach\n");
+ dev_dbg(&link->dev, "com20020_detach\n");
- dev_dbg(&link->dev, "unregister...\n");
+ dev_dbg(&link->dev, "unregister...\n");
- unregister_netdev(dev);
+ unregister_netdev(dev);
- /*
- * this is necessary because we register our IRQ separately
- * from card services.
- */
- if (dev->irq)
- free_irq(dev->irq, dev);
+ /* this is necessary because we register our IRQ separately
+ * from card services.
+ */
+ if (dev->irq)
+ free_irq(dev->irq, dev);
- com20020_release(link);
+ com20020_release(link);
- /* Unlink device structure, free bits */
- dev_dbg(&link->dev, "unlinking...\n");
- if (link->priv)
- {
- dev = info->dev;
- if (dev)
- {
- dev_dbg(&link->dev, "kfree...\n");
- free_netdev(dev);
+ /* Unlink device structure, free bits */
+ dev_dbg(&link->dev, "unlinking...\n");
+ if (link->priv) {
+ dev = info->dev;
+ if (dev) {
+ dev_dbg(&link->dev, "kfree...\n");
+ free_netdev(dev);
+ }
+ dev_dbg(&link->dev, "kfree2...\n");
+ kfree(info);
}
- dev_dbg(&link->dev, "kfree2...\n");
- kfree(info);
- }
} /* com20020_detach */
static int com20020_config(struct pcmcia_device *link)
{
- struct arcnet_local *lp;
- struct com20020_dev *info;
- struct net_device *dev;
- int i, ret;
- int ioaddr;
+ struct arcnet_local *lp;
+ struct com20020_dev *info;
+ struct net_device *dev;
+ int i, ret;
+ int ioaddr;
+
+ info = link->priv;
+ dev = info->dev;
+
+ dev_dbg(&link->dev, "config...\n");
+
+ dev_dbg(&link->dev, "com20020_config\n");
- info = link->priv;
- dev = info->dev;
+ dev_dbg(&link->dev, "baseport1 is %Xh\n",
+ (unsigned int)link->resource[0]->start);
- dev_dbg(&link->dev, "config...\n");
+ i = -ENODEV;
+ link->io_lines = 16;
- dev_dbg(&link->dev, "com20020_config\n");
+ if (!link->resource[0]->start) {
+ for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) {
+ link->resource[0]->start = ioaddr;
+ i = pcmcia_request_io(link);
+ if (i == 0)
+ break;
+ }
+ } else {
+ i = pcmcia_request_io(link);
+ }
- dev_dbg(&link->dev, "baseport1 is %Xh\n",
- (unsigned int) link->resource[0]->start);
+ if (i != 0) {
+ dev_dbg(&link->dev, "requestIO failed totally!\n");
+ goto failed;
+ }
- i = -ENODEV;
- link->io_lines = 16;
+ ioaddr = dev->base_addr = link->resource[0]->start;
+ dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
- if (!link->resource[0]->start)
- {
- for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
- {
- link->resource[0]->start = ioaddr;
- i = pcmcia_request_io(link);
- if (i == 0)
- break;
+ dev_dbg(&link->dev, "request IRQ %d\n",
+ link->irq);
+ if (!link->irq) {
+ dev_dbg(&link->dev, "requestIRQ failed totally!\n");
+ goto failed;
}
- }
- else
- i = pcmcia_request_io(link);
-
- if (i != 0)
- {
- dev_dbg(&link->dev, "requestIO failed totally!\n");
- goto failed;
- }
-
- ioaddr = dev->base_addr = link->resource[0]->start;
- dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
-
- dev_dbg(&link->dev, "request IRQ %d\n",
- link->irq);
- if (!link->irq)
- {
- dev_dbg(&link->dev, "requestIRQ failed totally!\n");
- goto failed;
- }
-
- dev->irq = link->irq;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- if (com20020_check(dev))
- {
- regdump(dev);
- goto failed;
- }
-
- lp = netdev_priv(dev);
- lp->card_name = "PCMCIA COM20020";
- lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
-
- SET_NETDEV_DEV(dev, &link->dev);
-
- i = com20020_found(dev, 0); /* calls register_netdev */
-
- if (i != 0) {
- dev_notice(&link->dev,
- "com20020_found() failed\n");
- goto failed;
- }
-
- netdev_dbg(dev, "port %#3lx, irq %d\n",
- dev->base_addr, dev->irq);
- return 0;
+
+ dev->irq = link->irq;
+
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ if (com20020_check(dev)) {
+ regdump(dev);
+ goto failed;
+ }
+
+ lp = netdev_priv(dev);
+ lp->card_name = "PCMCIA COM20020";
+ lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
+
+ SET_NETDEV_DEV(dev, &link->dev);
+
+ i = com20020_found(dev, 0); /* calls register_netdev */
+
+ if (i != 0) {
+ dev_notice(&link->dev,
+ "com20020_found() failed\n");
+ goto failed;
+ }
+
+ netdev_dbg(dev, "port %#3lx, irq %d\n",
+ dev->base_addr, dev->irq);
+ return 0;
failed:
- dev_dbg(&link->dev, "com20020_config failed...\n");
- com20020_release(link);
- return -ENODEV;
+ dev_dbg(&link->dev, "com20020_config failed...\n");
+ com20020_release(link);
+ return -ENODEV;
} /* com20020_config */
static void com20020_release(struct pcmcia_device *link)
if (link->open) {
int ioaddr = dev->base_addr;
struct arcnet_local *lp = netdev_priv(dev);
- ARCRESET;
+
+ arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG);
+ udelay(5);
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
}
return 0;
static const struct pcmcia_device_id com20020_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
- "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
+ "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
PCMCIA_DEVICE_PROD_ID12("SoHard AG",
- "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
+ "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
projects / karo-tx-linux.git / blobdiff