/*
* Linux ARCnet driver - COM90xx chipset (memory-mapped buffers)
- *
+ *
* Written 1994-1999 by Avery Pennarun.
* Written 1999 by Martin Mares <mj@ucw.cz>.
* Derived from skeleton.c by Donald Becker.
*
* **********************
*/
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/arcdevice.h>
-
-
-#define VERSION "arcnet: COM90xx chipset support\n"
+#include <linux/io.h>
+#include "arcdevice.h"
+#include "com9026.h"
/* Define this to speed up the autoprobe by assuming if only one io port and
* shmem are left in the list at Stage 5, they must correspond to each
*/
#undef FAST_PROBE
-
/* Internal function declarations */
static int com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *);
static void com90xx_command(struct net_device *dev, int command);
static int com90xx_reset(struct net_device *dev, int really_reset);
static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset,
void *buf, int count);
-static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset,
- void *buf, int count);
+static void com90xx_copy_from_card(struct net_device *dev, int bufnum,
+ int offset, void *buf, int count);
/* Known ARCnet cards */
/* Amount of I/O memory used by the card */
#define BUFFER_SIZE (512)
-#define MIRROR_SIZE (BUFFER_SIZE*4)
-
-/* COM 9026 controller chip --> ARCnet register addresses */
-#define _INTMASK (ioaddr+0) /* writable */
-#define _STATUS (ioaddr+0) /* readable */
-#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */
-#define _CONFIG (ioaddr+2) /* Configuration register */
-#define _RESET (ioaddr+8) /* software reset (on read) */
-#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */
-#define _ADDR_HI (ioaddr+15) /* Control registers for said */
-#define _ADDR_LO (ioaddr+14)
-
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ASTATUS() inb(_STATUS)
-#define ACOMMAND(cmd) outb((cmd),_COMMAND)
-#define AINTMASK(msk) outb((msk),_INTMASK)
-
+#define MIRROR_SIZE (BUFFER_SIZE * 4)
static int com90xx_skip_probe __initdata = 0;
{
int count, status, ioaddr, numprint, airq, openparen = 0;
unsigned long airqmask;
- int ports[(0x3f0 - 0x200) / 16 + 1] =
- {0};
+ int ports[(0x3f0 - 0x200) / 16 + 1] = { 0 };
unsigned long *shmems;
void __iomem **iomem;
int numports, numshmems, *port;
if (!io && !irq && !shmem && !*device && com90xx_skip_probe)
return;
- shmems = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(unsigned long),
+ shmems = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(unsigned long),
GFP_KERNEL);
if (!shmems)
return;
- iomem = kzalloc(((0x100000-0xa0000) / 0x800) * sizeof(void __iomem *),
- GFP_KERNEL);
+ iomem = kzalloc(((0x100000 - 0xa0000) / 0x800) * sizeof(void __iomem *),
+ GFP_KERNEL);
if (!iomem) {
kfree(shmems);
return;
}
- BUGLVL(D_NORMAL) printk(VERSION);
+ if (BUGLVL(D_NORMAL))
+ pr_info("%s\n", "COM90xx chipset support");
/* set up the arrays where we'll store the possible probe addresses */
numports = numshmems = 0;
numprint++;
numprint %= 8;
if (!numprint) {
- BUGMSG2(D_INIT, "\n");
- BUGMSG2(D_INIT, "S1: ");
+ arc_cont(D_INIT, "\n");
+ arc_cont(D_INIT, "S1: ");
}
- BUGMSG2(D_INIT, "%Xh ", *port);
+ arc_cont(D_INIT, "%Xh ", *port);
ioaddr = *port;
- if (!request_region(*port, ARCNET_TOTAL_SIZE, "arcnet (90xx)")) {
- BUGMSG2(D_INIT_REASONS, "(request_region)\n");
- BUGMSG2(D_INIT_REASONS, "S1: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ if (!request_region(*port, ARCNET_TOTAL_SIZE,
+ "arcnet (90xx)")) {
+ arc_cont(D_INIT_REASONS, "(request_region)\n");
+ arc_cont(D_INIT_REASONS, "S1: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
*port-- = ports[--numports];
continue;
}
- if (ASTATUS() == 0xFF) {
- BUGMSG2(D_INIT_REASONS, "(empty)\n");
- BUGMSG2(D_INIT_REASONS, "S1: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ if (arcnet_inb(ioaddr, COM9026_REG_R_STATUS) == 0xFF) {
+ arc_cont(D_INIT_REASONS, "(empty)\n");
+ arc_cont(D_INIT_REASONS, "S1: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
release_region(*port, ARCNET_TOTAL_SIZE);
*port-- = ports[--numports];
continue;
}
- inb(_RESET); /* begin resetting card */
+ /* begin resetting card */
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
- BUGMSG2(D_INIT_REASONS, "\n");
- BUGMSG2(D_INIT_REASONS, "S1: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ arc_cont(D_INIT_REASONS, "\n");
+ arc_cont(D_INIT_REASONS, "S1: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
}
- BUGMSG2(D_INIT, "\n");
+ arc_cont(D_INIT, "\n");
if (!numports) {
- BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n");
+ arc_cont(D_NORMAL, "S1: No ARCnet cards found.\n");
kfree(shmems);
kfree(iomem);
return;
numprint++;
numprint %= 8;
if (!numprint) {
- BUGMSG2(D_INIT, "\n");
- BUGMSG2(D_INIT, "S2: ");
+ arc_cont(D_INIT, "\n");
+ arc_cont(D_INIT, "S2: ");
}
- BUGMSG2(D_INIT, "%Xh ", *port);
+ arc_cont(D_INIT, "%Xh ", *port);
}
- BUGMSG2(D_INIT, "\n");
+ arc_cont(D_INIT, "\n");
mdelay(RESETtime);
/* Stage 3: abandon any shmem addresses that don't have the signature
numprint++;
numprint %= 8;
if (!numprint) {
- BUGMSG2(D_INIT, "\n");
- BUGMSG2(D_INIT, "S3: ");
+ arc_cont(D_INIT, "\n");
+ arc_cont(D_INIT, "S3: ");
}
- BUGMSG2(D_INIT, "%lXh ", *p);
+ arc_cont(D_INIT, "%lXh ", *p);
if (!request_mem_region(*p, MIRROR_SIZE, "arcnet (90xx)")) {
- BUGMSG2(D_INIT_REASONS, "(request_mem_region)\n");
- BUGMSG2(D_INIT_REASONS, "Stage 3: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ arc_cont(D_INIT_REASONS, "(request_mem_region)\n");
+ arc_cont(D_INIT_REASONS, "Stage 3: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
goto out;
}
base = ioremap(*p, MIRROR_SIZE);
if (!base) {
- BUGMSG2(D_INIT_REASONS, "(ioremap)\n");
- BUGMSG2(D_INIT_REASONS, "Stage 3: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ arc_cont(D_INIT_REASONS, "(ioremap)\n");
+ arc_cont(D_INIT_REASONS, "Stage 3: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
goto out1;
}
- if (readb(base) != TESTvalue) {
- BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
- readb(base), TESTvalue);
- BUGMSG2(D_INIT_REASONS, "S3: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ if (arcnet_readb(base, COM9026_REG_R_STATUS) != TESTvalue) {
+ arc_cont(D_INIT_REASONS, "(%02Xh != %02Xh)\n",
+ arcnet_readb(base, COM9026_REG_R_STATUS),
+ TESTvalue);
+ arc_cont(D_INIT_REASONS, "S3: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
goto out2;
}
/* By writing 0x42 to the TESTvalue location, we also make
* in another pass through this loop, they will be discarded
* because *cptr != TESTvalue.
*/
- writeb(0x42, base);
- if (readb(base) != 0x42) {
- BUGMSG2(D_INIT_REASONS, "(read only)\n");
- BUGMSG2(D_INIT_REASONS, "S3: ");
+ arcnet_writeb(0x42, base, COM9026_REG_W_INTMASK);
+ if (arcnet_readb(base, COM9026_REG_R_STATUS) != 0x42) {
+ arc_cont(D_INIT_REASONS, "(read only)\n");
+ arc_cont(D_INIT_REASONS, "S3: ");
goto out2;
}
- BUGMSG2(D_INIT_REASONS, "\n");
- BUGMSG2(D_INIT_REASONS, "S3: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ arc_cont(D_INIT_REASONS, "\n");
+ arc_cont(D_INIT_REASONS, "S3: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
iomem[index] = base;
continue;
out2:
*p-- = shmems[--numshmems];
index--;
}
- BUGMSG2(D_INIT, "\n");
+ arc_cont(D_INIT, "\n");
if (!numshmems) {
- BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n");
+ arc_cont(D_NORMAL, "S3: No ARCnet cards found.\n");
for (port = &ports[0]; port < ports + numports; port++)
release_region(*port, ARCNET_TOTAL_SIZE);
kfree(shmems);
numprint++;
numprint %= 8;
if (!numprint) {
- BUGMSG2(D_INIT, "\n");
- BUGMSG2(D_INIT, "S4: ");
+ arc_cont(D_INIT, "\n");
+ arc_cont(D_INIT, "S4: ");
}
- BUGMSG2(D_INIT, "%lXh ", *p);
+ arc_cont(D_INIT, "%lXh ", *p);
}
- BUGMSG2(D_INIT, "\n");
+ arc_cont(D_INIT, "\n");
/* Stage 5: for any ports that have the correct status, can disable
* the RESET flag, and (if no irq is given) generate an autoirq,
numprint = -1;
for (port = &ports[0]; port < ports + numports; port++) {
int found = 0;
+
numprint++;
numprint %= 8;
if (!numprint) {
- BUGMSG2(D_INIT, "\n");
- BUGMSG2(D_INIT, "S5: ");
+ arc_cont(D_INIT, "\n");
+ arc_cont(D_INIT, "S5: ");
}
- BUGMSG2(D_INIT, "%Xh ", *port);
+ arc_cont(D_INIT, "%Xh ", *port);
ioaddr = *port;
- status = ASTATUS();
+ status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if ((status & 0x9D)
!= (NORXflag | RECONflag | TXFREEflag | RESETflag)) {
- BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status);
- BUGMSG2(D_INIT_REASONS, "S5: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ arc_cont(D_INIT_REASONS, "(status=%Xh)\n", status);
+ arc_cont(D_INIT_REASONS, "S5: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
release_region(*port, ARCNET_TOTAL_SIZE);
*port-- = ports[--numports];
continue;
}
- ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
- status = ASTATUS();
+ arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
+ ioaddr, COM9026_REG_W_COMMAND);
+ status = arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
if (status & RESETflag) {
- BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
- status);
- BUGMSG2(D_INIT_REASONS, "S5: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ arc_cont(D_INIT_REASONS, " (eternal reset, status=%Xh)\n",
+ status);
+ arc_cont(D_INIT_REASONS, "S5: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
release_region(*port, ARCNET_TOTAL_SIZE);
*port-- = ports[--numports];
continue;
* we tell it to start receiving.
*/
airqmask = probe_irq_on();
- AINTMASK(NORXflag);
+ arcnet_outb(NORXflag, ioaddr, COM9026_REG_W_INTMASK);
udelay(1);
- AINTMASK(0);
+ arcnet_outb(0, ioaddr, COM9026_REG_W_INTMASK);
airq = probe_irq_off(airqmask);
if (airq <= 0) {
- BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq);
- BUGMSG2(D_INIT_REASONS, "S5: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ arc_cont(D_INIT_REASONS, "(airq=%d)\n", airq);
+ arc_cont(D_INIT_REASONS, "S5: ");
+ if (BUGLVL(D_INIT_REASONS))
+ numprint = 0;
release_region(*port, ARCNET_TOTAL_SIZE);
*port-- = ports[--numports];
continue;
airq = irq;
}
- BUGMSG2(D_INIT, "(%d,", airq);
+ arc_cont(D_INIT, "(%d,", airq);
openparen = 1;
/* Everything seems okay. But which shmem, if any, puts
*/
#ifdef FAST_PROBE
if (numports > 1 || numshmems > 1) {
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
} else {
/* just one shmem and port, assume they match */
- writeb(TESTvalue, iomem[0]);
+ arcnet_writeb(TESTvalue, iomem[0],
+ COM9026_REG_W_INTMASK);
}
#else
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
#endif
u_long ptr = shmems[index];
void __iomem *base = iomem[index];
- if (readb(base) == TESTvalue) { /* found one */
- BUGMSG2(D_INIT, "%lXh)\n", *p);
+ if (arcnet_readb(base, COM9026_REG_R_STATUS) == TESTvalue) { /* found one */
+ arc_cont(D_INIT, "%lXh)\n", *p);
openparen = 0;
/* register the card */
iomem[index] = iomem[numshmems];
break; /* go to the next I/O port */
} else {
- BUGMSG2(D_INIT_REASONS, "%Xh-", readb(base));
+ arc_cont(D_INIT_REASONS, "%Xh-",
+ arcnet_readb(base, COM9026_REG_R_STATUS));
}
}
if (openparen) {
- BUGLVL(D_INIT) printk("no matching shmem)\n");
- BUGLVL(D_INIT_REASONS) printk("S5: ");
- BUGLVL(D_INIT_REASONS) numprint = 0;
+ if (BUGLVL(D_INIT))
+ pr_cont("no matching shmem)\n");
+ if (BUGLVL(D_INIT_REASONS)) {
+ pr_cont("S5: ");
+ numprint = 0;
+ }
}
if (!found)
release_region(*port, ARCNET_TOTAL_SIZE);
*port-- = ports[--numports];
}
- BUGLVL(D_INIT_REASONS) printk("\n");
+ if (BUGLVL(D_INIT_REASONS))
+ pr_cont("\n");
/* Now put back TESTvalue on all leftover shmems. */
for (index = 0; index < numshmems; index++) {
- writeb(TESTvalue, iomem[index]);
+ arcnet_writeb(TESTvalue, iomem[index], COM9026_REG_W_INTMASK);
iounmap(iomem[index]);
release_mem_region(shmems[index], MIRROR_SIZE);
}
p = ioremap(addr, size);
if (p) {
- if (readb(p) == TESTvalue)
+ if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue)
res = 1;
else
res = 0;
/* Set up the struct net_device associated with this card. Called after
* probing succeeds.
*/
-static int __init com90xx_found(int ioaddr, int airq, u_long shmem, void __iomem *p)
+static int __init com90xx_found(int ioaddr, int airq, u_long shmem,
+ void __iomem *p)
{
struct net_device *dev = NULL;
struct arcnet_local *lp;
/* allocate struct net_device */
dev = alloc_arcdev(device);
if (!dev) {
- BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n");
+ arc_cont(D_NORMAL, "com90xx: Can't allocate device!\n");
iounmap(p);
release_mem_region(shmem, MIRROR_SIZE);
return -ENOMEM;
* 2k (or there are no mirrors at all) but on some, it's 4k.
*/
mirror_size = MIRROR_SIZE;
- if (readb(p) == TESTvalue &&
+ if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue &&
check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
mirror_size = 2 * MIRROR_SIZE;
iounmap(p);
release_mem_region(shmem, MIRROR_SIZE);
- if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)"))
+ if (!request_mem_region(dev->mem_start,
+ dev->mem_end - dev->mem_start + 1,
+ "arcnet (90xx)"))
goto err_free_dev;
/* reserve the irq */
if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) {
- BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq);
+ arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", airq);
goto err_release_mem;
}
dev->irq = airq;
lp->hw.owner = THIS_MODULE;
lp->hw.copy_to_card = com90xx_copy_to_card;
lp->hw.copy_from_card = com90xx_copy_from_card;
- lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1);
+ lp->mem_start = ioremap(dev->mem_start,
+ dev->mem_end - dev->mem_start + 1);
if (!lp->mem_start) {
- BUGMSG(D_NORMAL, "Can't remap device memory!\n");
+ arc_printk(D_NORMAL, dev, "Can't remap device memory!\n");
goto err_free_irq;
}
/* get and check the station ID from offset 1 in shmem */
- dev->dev_addr[0] = readb(lp->mem_start + 1);
+ dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION);
dev->base_addr = ioaddr;
- BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, "
- "ShMem %lXh (%ld*%xh).\n",
- dev->dev_addr[0],
- dev->base_addr, dev->irq, dev->mem_start,
- (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);
+ arc_printk(D_NORMAL, dev, "COM90xx station %02Xh found at %03lXh, IRQ %d, ShMem %lXh (%ld*%xh).\n",
+ dev->dev_addr[0],
+ dev->base_addr, dev->irq, dev->mem_start,
+ (dev->mem_end - dev->mem_start + 1) / mirror_size,
+ mirror_size);
if (register_netdev(dev))
goto err_unmap;
return -EIO;
}
-
static void com90xx_command(struct net_device *dev, int cmd)
{
short ioaddr = dev->base_addr;
- ACOMMAND(cmd);
+ arcnet_outb(cmd, ioaddr, COM9026_REG_W_COMMAND);
}
-
static int com90xx_status(struct net_device *dev)
{
short ioaddr = dev->base_addr;
- return ASTATUS();
+ return arcnet_inb(ioaddr, COM9026_REG_R_STATUS);
}
-
static void com90xx_setmask(struct net_device *dev, int mask)
{
short ioaddr = dev->base_addr;
- AINTMASK(mask);
+ arcnet_outb(mask, ioaddr, COM9026_REG_W_INTMASK);
}
-
-/*
- * Do a hardware reset on the card, and set up necessary registers.
- *
+/* Do a hardware reset on the card, and set up necessary registers.
+ *
* This should be called as little as possible, because it disrupts the
* token on the network (causes a RECON) and requires a significant delay.
*
struct arcnet_local *lp = netdev_priv(dev);
short ioaddr = dev->base_addr;
- BUGMSG(D_INIT, "Resetting (status=%02Xh)\n", ASTATUS());
+ arc_printk(D_INIT, dev, "Resetting (status=%02Xh)\n",
+ arcnet_inb(ioaddr, COM9026_REG_R_STATUS));
if (really_reset) {
/* reset the card */
- inb(_RESET);
+ arcnet_inb(ioaddr, COM9026_REG_R_RESET);
mdelay(RESETtime);
}
- ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */
- ACOMMAND(CFLAGScmd | CONFIGclear);
+ /* clear flags & end reset */
+ arcnet_outb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
+ arcnet_outb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
+#if 0
/* don't do this until we verify that it doesn't hurt older cards! */
- /* outb(inb(_CONFIG) | ENABLE16flag, _CONFIG); */
+ arcnet_outb(arcnet_inb(ioaddr, COM9026_REG_RW_CONFIG) | ENABLE16flag,
+ ioaddr, COM9026_REG_RW_CONFIG);
+#endif
/* verify that the ARCnet signature byte is present */
- if (readb(lp->mem_start) != TESTvalue) {
+ if (arcnet_readb(lp->mem_start, COM9026_REG_R_STATUS) != TESTvalue) {
if (really_reset)
- BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
+ arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
return 1;
}
/* enable extended (512-byte) packets */
- ACOMMAND(CONFIGcmd | EXTconf);
+ arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
/* clean out all the memory to make debugging make more sense :) */
- BUGLVL(D_DURING)
- memset_io(lp->mem_start, 0x42, 2048);
+ if (BUGLVL(D_DURING))
+ memset_io(lp->mem_start, 0x42, 2048);
/* done! return success. */
return 0;
}
-static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset,
- void *buf, int count)
+static void com90xx_copy_to_card(struct net_device *dev, int bufnum,
+ int offset, void *buf, int count)
{
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
- TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count));
-}
+ TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count));
+}
-static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset,
- void *buf, int count)
+static void com90xx_copy_from_card(struct net_device *dev, int bufnum,
+ int offset, void *buf, int count)
{
struct arcnet_local *lp = netdev_priv(dev);
void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
- TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
-}
+ TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
+}
MODULE_LICENSE("GPL");
free_irq(dev->irq, dev);
iounmap(lp->mem_start);
release_region(dev->base_addr, ARCNET_TOTAL_SIZE);
- release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
+ release_mem_region(dev->mem_start,
+ dev->mem_end - dev->mem_start + 1);
free_netdev(dev);
}
}
s = get_options(s, 8, ints);
if (!ints[0] && !*s) {
- printk("com90xx: Disabled.\n");
+ pr_notice("Disabled\n");
return 1;
}
switch (ints[0]) {
default: /* ERROR */
- printk("com90xx: Too many arguments.\n");
+ pr_err("Too many arguments\n");
case 3: /* Mem address */
shmem = ints[3];
case 2: /* IRQ */
projects / karo-tx-linux.git / blobdiff