/*
* Linux ARCnet driver - RFC1051 ("simple" standard) packet encapsulation
- *
+ *
* Written 1994-1999 by Avery Pennarun.
* Derived from skeleton.c by Donald Becker.
*
*
* **********************
*/
+
+#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/init.h>
#include <net/arp.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
-#include <linux/arcdevice.h>
-
-#define VERSION "arcnet: RFC1051 \"simple standard\" (`s') encapsulation support loaded.\n"
+#include "arcdevice.h"
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev);
static void rx(struct net_device *dev, int bufnum,
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum);
-
-static struct ArcProto rfc1051_proto =
-{
+static struct ArcProto rfc1051_proto = {
.suffix = 's',
.mtu = XMTU - RFC1051_HDR_SIZE,
.is_ip = 1,
.ack_tx = NULL
};
-
static int __init arcnet_rfc1051_init(void)
{
- printk(VERSION);
+ pr_info("%s\n", "RFC1051 \"simple standard\" (`s') encapsulation support loaded");
arc_proto_map[ARC_P_IP_RFC1051]
= arc_proto_map[ARC_P_ARP_RFC1051]
MODULE_LICENSE("GPL");
-/*
- * Determine a packet's protocol ID.
- *
+/* Determine a packet's protocol ID.
+ *
* With ARCnet we have to convert everything to Ethernet-style stuff.
*/
static __be16 type_trans(struct sk_buff *skb, struct net_device *dev)
{
- struct archdr *pkt = (struct archdr *) skb->data;
+ struct archdr *pkt = (struct archdr *)skb->data;
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
skb_reset_mac_header(skb);
skb_pull(skb, hdr_size);
- if (pkt->hard.dest == 0)
+ if (pkt->hard.dest == 0) {
skb->pkt_type = PACKET_BROADCAST;
- else if (dev->flags & IFF_PROMISC) {
+ } else if (dev->flags & IFF_PROMISC) {
/* if we're not sending to ourselves :) */
if (pkt->hard.dest != dev->dev_addr[0])
skb->pkt_type = PACKET_OTHERHOST;
return htons(ETH_P_IP);
}
-
/* packet receiver */
static void rx(struct net_device *dev, int bufnum,
struct archdr *pkthdr, int length)
struct archdr *pkt = pkthdr;
int ofs;
- BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
+ arc_printk(D_DURING, dev, "it's a raw packet (length=%d)\n", length);
if (length >= MinTU)
ofs = 512 - length;
ofs = 256 - length;
skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
- if (skb == NULL) {
- BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
+ if (!skb) {
dev->stats.rx_dropped++;
return;
}
skb_put(skb, length + ARC_HDR_SIZE);
skb->dev = dev;
- pkt = (struct archdr *) skb->data;
+ pkt = (struct archdr *)skb->data;
/* up to sizeof(pkt->soft) has already been copied from the card */
memcpy(pkt, pkthdr, sizeof(struct archdr));
pkt->soft.raw + sizeof(pkt->soft),
length - sizeof(pkt->soft));
- BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
+ if (BUGLVL(D_SKB))
+ arcnet_dump_skb(dev, skb, "rx");
skb->protocol = type_trans(skb, dev);
netif_rx(skb);
}
-
-/*
- * Create the ARCnet hard/soft headers for RFC1051.
- */
+/* Create the ARCnet hard/soft headers for RFC1051 */
static int build_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type, uint8_t daddr)
{
int hdr_size = ARC_HDR_SIZE + RFC1051_HDR_SIZE;
- struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
+ struct archdr *pkt = (struct archdr *)skb_push(skb, hdr_size);
struct arc_rfc1051 *soft = &pkt->soft.rfc1051;
/* set the protocol ID according to RFC1051 */
soft->proto = ARC_P_ARP_RFC1051;
break;
default:
- BUGMSG(D_NORMAL, "RFC1051: I don't understand protocol %d (%Xh)\n",
- type, type);
+ arc_printk(D_NORMAL, dev, "RFC1051: I don't understand protocol %d (%Xh)\n",
+ type, type);
dev->stats.tx_errors++;
dev->stats.tx_aborted_errors++;
return 0;
}
-
- /*
- * Set the source hardware address.
+ /* Set the source hardware address.
*
* This is pretty pointless for most purposes, but it can help in
- * debugging. ARCnet does not allow us to change the source address in
- * the actual packet sent)
+ * debugging. ARCnet does not allow us to change the source address
+ * in the actual packet sent.
*/
pkt->hard.source = *dev->dev_addr;
/* see linux/net/ethernet/eth.c to see where I got the following */
if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
- /*
- * FIXME: fill in the last byte of the dest ipaddr here to better
- * comply with RFC1051 in "noarp" mode.
+ /* FIXME: fill in the last byte of the dest ipaddr here to
+ * better comply with RFC1051 in "noarp" mode.
*/
pkt->hard.dest = 0;
return hdr_size;
return hdr_size; /* success */
}
-
static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
int bufnum)
{
struct arc_hardware *hard = &pkt->hard;
int ofs;
- BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
- lp->next_tx, lp->cur_tx, bufnum);
+ arc_printk(D_DURING, dev, "prepare_tx: txbufs=%d/%d/%d\n",
+ lp->next_tx, lp->cur_tx, bufnum);
- length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
+ /* hard header is not included in packet length */
+ length -= ARC_HDR_SIZE;
if (length > XMTU) {
/* should never happen! other people already check for this. */
- BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n",
- length, XMTU);
+ arc_printk(D_NORMAL, dev, "Bug! prepare_tx with size %d (> %d)\n",
+ length, XMTU);
length = XMTU;
}
if (length > MinTU) {
} else if (length > MTU) {
hard->offset[0] = 0;
hard->offset[1] = ofs = 512 - length - 3;
- } else
+ } else {
hard->offset[0] = ofs = 256 - length;
+ }
lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
projects / karo-tx-linux.git / blobdiff