"NPAR",
"LinkPolling",
"flow-director-atr",
+ "veb-stats",
};
#define I40E_PRIV_FLAGS_STR_LEN ARRAY_SIZE(i40e_priv_flags_strings)
if (hw_link_info->requested_speeds & I40E_LINK_SPEED_1GB)
ecmd->advertising |= ADVERTISED_1000baseT_Full;
break;
+ case I40E_PHY_TYPE_1000BASE_T_OPTICAL:
+ ecmd->supported = SUPPORTED_Autoneg |
+ SUPPORTED_1000baseT_Full;
+ ecmd->advertising = ADVERTISED_Autoneg |
+ ADVERTISED_1000baseT_Full;
+ break;
case I40E_PHY_TYPE_100BASE_TX:
ecmd->supported = SUPPORTED_Autoneg |
SUPPORTED_100baseT_Full;
/* Check autoneg */
if (autoneg == AUTONEG_ENABLE) {
- /* If autoneg is not supported, return error */
- if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) {
- netdev_info(netdev, "Autoneg not supported on this phy\n");
- return -EINVAL;
- }
/* If autoneg was not already enabled */
if (!(hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED)) {
+ /* If autoneg is not supported, return error */
+ if (!(safe_ecmd.supported & SUPPORTED_Autoneg)) {
+ netdev_info(netdev, "Autoneg not supported on this phy\n");
+ return -EINVAL;
+ }
+ /* Autoneg is allowed to change */
config.abilities = abilities.abilities |
I40E_AQ_PHY_ENABLE_AN;
change = true;
}
} else {
- /* If autoneg is supported 10GBASE_T is the only phy that
- * can disable it, so otherwise return error
- */
- if (safe_ecmd.supported & SUPPORTED_Autoneg &&
- hw->phy.link_info.phy_type != I40E_PHY_TYPE_10GBASE_T) {
- netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
- return -EINVAL;
- }
/* If autoneg is currently enabled */
if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) {
+ /* If autoneg is supported 10GBASE_T is the only PHY
+ * that can disable it, so otherwise return error
+ */
+ if (safe_ecmd.supported & SUPPORTED_Autoneg &&
+ hw->phy.link_info.phy_type !=
+ I40E_PHY_TYPE_10GBASE_T) {
+ netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
+ return -EINVAL;
+ }
+ /* Autoneg is allowed to change */
config.abilities = abilities.abilities &
~I40E_AQ_PHY_ENABLE_AN;
change = true;
status = i40e_update_link_info(hw);
if (status)
- netdev_info(netdev, "Updating link info failed with err %s aq_err %s\n",
- i40e_stat_str(hw, status),
- i40e_aq_str(hw, hw->aq.asq_last_status));
+ netdev_dbg(netdev, "Updating link info failed with err %s aq_err %s\n",
+ i40e_stat_str(hw, status),
+ i40e_aq_str(hw, hw->aq.asq_last_status));
} else {
netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");
cmd = (struct i40e_nvm_access *)eeprom;
ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
- if (ret_val &&
- ((hw->aq.asq_last_status != I40E_AQ_RC_EACCES) ||
- (hw->debug_mask & I40E_DEBUG_NVM)))
+ if (ret_val && (hw->debug_mask & I40E_DEBUG_NVM))
dev_info(&pf->pdev->dev,
"NVMUpdate read failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
ret_val, hw->aq.asq_last_status, errno,
cmd = (struct i40e_nvm_access *)eeprom;
ret_val = i40e_nvmupd_command(hw, cmd, bytes, &errno);
- if (ret_val &&
- ((hw->aq.asq_last_status != I40E_AQ_RC_EPERM &&
- hw->aq.asq_last_status != I40E_AQ_RC_EBUSY) ||
- (hw->debug_mask & I40E_DEBUG_NVM)))
+ if (ret_val && (hw->debug_mask & I40E_DEBUG_NVM))
dev_info(&pf->pdev->dev,
"NVMUpdate write failed err=%d status=0x%x errno=%d module=%d offset=0x%x size=%d\n",
ret_val, hw->aq.asq_last_status, errno,
strlcpy(drvinfo->driver, i40e_driver_name, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, i40e_driver_version_str,
sizeof(drvinfo->version));
- strlcpy(drvinfo->fw_version, i40e_fw_version_str(&pf->hw),
+ strlcpy(drvinfo->fw_version, i40e_nvm_version_str(&pf->hw),
sizeof(drvinfo->fw_version));
strlcpy(drvinfo->bus_info, pci_name(pf->pdev),
sizeof(drvinfo->bus_info));
data[i++] = (i40e_gstrings_veb_stats[j].sizeof_stat ==
sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
+ for (j = 0; j < I40E_MAX_TRAFFIC_CLASS; j++) {
+ data[i++] = veb->tc_stats.tc_tx_packets[j];
+ data[i++] = veb->tc_stats.tc_tx_bytes[j];
+ data[i++] = veb->tc_stats.tc_rx_packets[j];
+ data[i++] = veb->tc_stats.tc_rx_bytes[j];
+ }
}
for (j = 0; j < I40E_GLOBAL_STATS_LEN; j++) {
p = (char *)pf + i40e_gstrings_stats[j].stat_offset;
ec->rx_coalesce_usecs = vsi->rx_itr_setting & ~I40E_ITR_DYNAMIC;
ec->tx_coalesce_usecs = vsi->tx_itr_setting & ~I40E_ITR_DYNAMIC;
+ /* we use the _usecs_high to store/set the interrupt rate limit
+ * that the hardware supports, that almost but not quite
+ * fits the original intent of the ethtool variable,
+ * the rx_coalesce_usecs_high limits total interrupts
+ * per second from both tx/rx sources.
+ */
+ ec->rx_coalesce_usecs_high = vsi->int_rate_limit;
+ ec->tx_coalesce_usecs_high = vsi->int_rate_limit;
return 0;
}
if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq)
vsi->work_limit = ec->tx_max_coalesced_frames_irq;
+ /* tx_coalesce_usecs_high is ignored, use rx-usecs-high instead */
+ if (ec->tx_coalesce_usecs_high != vsi->int_rate_limit) {
+ netif_info(pf, drv, netdev, "tx-usecs-high is not used, please program rx-usecs-high\n");
+ return -EINVAL;
+ }
+
+ if (ec->rx_coalesce_usecs_high >= INTRL_REG_TO_USEC(I40E_MAX_INTRL)) {
+ netif_info(pf, drv, netdev, "Invalid value, rx-usecs-high range is 0-235\n");
+ return -EINVAL;
+ }
+
vector = vsi->base_vector;
if ((ec->rx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
(ec->rx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
return -EINVAL;
}
+ vsi->int_rate_limit = ec->rx_coalesce_usecs_high;
+
if ((ec->tx_coalesce_usecs >= (I40E_MIN_ITR << 1)) &&
(ec->tx_coalesce_usecs <= (I40E_MAX_ITR << 1))) {
vsi->tx_itr_setting = ec->tx_coalesce_usecs;
vsi->tx_itr_setting &= ~I40E_ITR_DYNAMIC;
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
+ u16 intrl = INTRL_USEC_TO_REG(vsi->int_rate_limit);
+
q_vector = vsi->q_vectors[i];
q_vector->rx.itr = ITR_TO_REG(vsi->rx_itr_setting);
wr32(hw, I40E_PFINT_ITRN(0, vector - 1), q_vector->rx.itr);
q_vector->tx.itr = ITR_TO_REG(vsi->tx_itr_setting);
wr32(hw, I40E_PFINT_ITRN(1, vector - 1), q_vector->tx.itr);
+ wr32(hw, I40E_PFINT_RATEN(vector - 1), intrl);
i40e_flush(hw);
}
I40E_PRIV_FLAGS_LINKPOLL_FLAG : 0;
ret_flags |= pf->flags & I40E_FLAG_FD_ATR_ENABLED ?
I40E_PRIV_FLAGS_FD_ATR : 0;
+ ret_flags |= pf->flags & I40E_FLAG_VEB_STATS_ENABLED ?
+ I40E_PRIV_FLAGS_VEB_STATS : 0;
return ret_flags;
}
pf->auto_disable_flags |= I40E_FLAG_FD_ATR_ENABLED;
}
+ if (flags & I40E_PRIV_FLAGS_VEB_STATS)
+ pf->flags |= I40E_FLAG_VEB_STATS_ENABLED;
+ else
+ pf->flags &= ~I40E_FLAG_VEB_STATS_ENABLED;
+
return 0;
}
projects / karo-tx-linux.git / blobdiff