}
/**
- * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to read from
* @reg: I2C device register to read from
* @val: pointer to location to receive read value
+ * @lock: true if to take and release semaphore
*
* Returns an error code on error.
- **/
-s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
- u16 reg, u16 *val)
+ */
+static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val, bool lock)
{
u32 swfw_mask = hw->phy.phy_semaphore_mask;
int max_retry = 10;
csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
csum = ~csum;
do {
- if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
return IXGBE_ERR_SWFW_SYNC;
ixgbe_i2c_start(hw);
/* Device Address and write indication */
if (ixgbe_clock_out_i2c_bit(hw, false))
goto fail;
ixgbe_i2c_stop(hw);
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
*val = (high_bits << 8) | low_bits;
return 0;
fail:
ixgbe_i2c_bus_clear(hw);
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
retry++;
if (retry < max_retry)
hw_dbg(hw, "I2C byte read combined error - Retry.\n");
}
/**
- * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val)
+{
+ return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_unlocked - Unlocked I2C read combined
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val)
+{
+ return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
* @hw: pointer to the hardware structure
* @addr: I2C bus address to write to
* @reg: I2C device register to write to
* @val: value to write
+ * @lock: true if to take and release semaphore
*
* Returns an error code on error.
- **/
-s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
- u8 addr, u16 reg, u16 val)
+ */
+static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 val, bool lock)
{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
int max_retry = 1;
int retry = 0;
u8 reg_high;
csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
csum = ~csum;
do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
ixgbe_i2c_start(hw);
/* Device Address and write indication */
if (ixgbe_out_i2c_byte_ack(hw, addr))
if (ixgbe_out_i2c_byte_ack(hw, csum))
goto fail;
ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
return 0;
fail:
ixgbe_i2c_bus_clear(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
retry++;
if (retry < max_retry)
hw_dbg(hw, "I2C byte write combined error - Retry.\n");
return IXGBE_ERR_I2C;
}
+/**
+ * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
+ u8 addr, u16 reg, u16 val)
+{
+ return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_unlocked - Unlocked I2C write combined
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
+ u8 addr, u16 reg, u16 val)
+{
+ return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false);
+}
+
/**
* ixgbe_identify_phy_generic - Get physical layer module
* @hw: pointer to hardware structure
return IXGBE_ERR_SFP_NOT_PRESENT;
}
+ /* LAN ID is needed for sfp_type determination */
+ hw->mac.ops.set_lan_id(hw);
+
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_IDENTIFIER,
&identifier);
if (status)
goto err_read_i2c_eeprom;
- /* LAN ID is needed for sfp_type determination */
- hw->mac.ops.set_lan_id(hw);
-
if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
hw->phy.type = ixgbe_phy_sfp_unsupported;
return IXGBE_ERR_SFP_NOT_SUPPORTED;
hw->phy.sfp_type = ixgbe_sfp_type_lr;
else
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
- } else if (hw->mac.type == ixgbe_mac_82599EB) {
+ } else {
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
if (hw->bus.lan_id == 0)
hw->phy.sfp_type =
}
/**
- * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * ixgbe_is_sfp_probe - Returns true if SFP is being detected
+ * @hw: pointer to hardware structure
+ * @offset: eeprom offset to be read
+ * @addr: I2C address to be read
+ */
+static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
+{
+ if (addr == IXGBE_I2C_EEPROM_DEV_ADDR &&
+ offset == IXGBE_SFF_IDENTIFIER &&
+ hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return true;
+ return false;
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to read
* @data: value read
+ * @lock: true if to take and release semaphore
*
* Performs byte read operation to SFP module's EEPROM over I2C interface at
* a specified device address.
- **/
-s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 *data)
+ */
+static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data, bool lock)
{
s32 status;
u32 max_retry = 10;
u32 retry = 0;
u32 swfw_mask = hw->phy.phy_semaphore_mask;
bool nack = true;
+
+ if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr))
+ max_retry = IXGBE_SFP_DETECT_RETRIES;
+
*data = 0;
do {
- if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
return IXGBE_ERR_SWFW_SYNC;
ixgbe_i2c_start(hw);
goto fail;
ixgbe_i2c_stop(hw);
- break;
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return 0;
fail:
ixgbe_i2c_bus_clear(hw);
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
- msleep(100);
+ if (lock) {
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msleep(100);
+ }
retry++;
if (retry < max_retry)
hw_dbg(hw, "I2C byte read error - Retrying.\n");
} while (retry < max_retry);
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-
return status;
}
/**
- * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ */
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, true);
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ */
+s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, false);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
* @hw: pointer to hardware structure
* @byte_offset: byte offset to write
* @data: value to write
+ * @lock: true if to take and release semaphore
*
* Performs byte write operation to SFP module's EEPROM over I2C interface at
* a specified device address.
- **/
-s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 data)
+ */
+static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data, bool lock)
{
s32 status;
u32 max_retry = 1;
u32 retry = 0;
u32 swfw_mask = hw->phy.phy_semaphore_mask;
- if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
return IXGBE_ERR_SWFW_SYNC;
do {
goto fail;
ixgbe_i2c_stop(hw);
- break;
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return 0;
fail:
ixgbe_i2c_bus_clear(hw);
hw_dbg(hw, "I2C byte write error.\n");
} while (retry < max_retry);
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
return status;
}
+/**
+ * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ */
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, true);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ */
+s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, false);
+}
+
/**
* ixgbe_i2c_start - Sets I2C start condition
* @hw: pointer to hardware structure
*
* Sets I2C start condition (High -> Low on SDA while SCL is High)
+ * Set bit-bang mode on X550 hardware.
**/
static void ixgbe_i2c_start(struct ixgbe_hw *hw)
{
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
+ i2cctl |= IXGBE_I2C_BB_EN(hw);
+
/* Start condition must begin with data and clock high */
ixgbe_set_i2c_data(hw, &i2cctl, 1);
ixgbe_raise_i2c_clk(hw, &i2cctl);
* @hw: pointer to hardware structure
*
* Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ * Disables bit-bang mode and negates data output enable on X550
+ * hardware.
**/
static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
{
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw);
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw);
+ u32 bb_en_bit = IXGBE_I2C_BB_EN(hw);
/* Stop condition must begin with data low and clock high */
ixgbe_set_i2c_data(hw, &i2cctl, 0);
/* bus free time between stop and start (4.7us)*/
udelay(IXGBE_I2C_T_BUF);
+
+ if (bb_en_bit || data_oe_bit || clk_oe_bit) {
+ i2cctl &= ~bb_en_bit;
+ i2cctl |= data_oe_bit | clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
}
/**
s32 i;
bool bit = false;
+ *data = 0;
for (i = 7; i >= 0; i--) {
ixgbe_clock_in_i2c_bit(hw, &bit);
*data |= bit << i;
/* Release SDA line (set high) */
i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
i2cctl |= IXGBE_I2C_DATA_OUT(hw);
+ i2cctl |= IXGBE_I2C_DATA_OE_N_EN(hw);
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl);
IXGBE_WRITE_FLUSH(hw);
**/
static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw);
s32 status = 0;
u32 i = 0;
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
u32 timeout = 10;
bool ack = true;
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
ixgbe_raise_i2c_clk(hw, &i2cctl);
-
/* Minimum high period of clock is 4us */
udelay(IXGBE_I2C_T_HIGH);
static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
{
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw);
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
ixgbe_raise_i2c_clk(hw, &i2cctl);
/* Minimum high period of clock is 4us */
* @i2cctl: Current value of I2CCTL register
*
* Raises the I2C clock line '0'->'1'
+ * Negates the I2C clock output enable on X550 hardware.
**/
static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
{
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN(hw);
u32 i = 0;
u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT;
u32 i2cctl_r = 0;
+ if (clk_oe_bit) {
+ *i2cctl |= clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl);
+ }
+
for (i = 0; i < timeout; i++) {
*i2cctl |= IXGBE_I2C_CLK_OUT(hw);
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl);
* @i2cctl: Current value of I2CCTL register
*
* Lowers the I2C clock line '1'->'0'
+ * Asserts the I2C clock output enable on X550 hardware.
**/
static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
{
*i2cctl &= ~IXGBE_I2C_CLK_OUT(hw);
+ *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN(hw);
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl);
IXGBE_WRITE_FLUSH(hw);
* @data: I2C data value (0 or 1) to set
*
* Sets the I2C data bit
+ * Asserts the I2C data output enable on X550 hardware.
**/
static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw);
+
if (data)
*i2cctl |= IXGBE_I2C_DATA_OUT(hw);
else
*i2cctl &= ~IXGBE_I2C_DATA_OUT(hw);
+ *i2cctl &= ~data_oe_bit;
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl);
IXGBE_WRITE_FLUSH(hw);
/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+ if (!data) /* Can't verify data in this case */
+ return 0;
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
/* Verify data was set correctly */
*i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
* @i2cctl: Current value of I2CCTL register
*
* Returns the I2C data bit value
+ * Negates the I2C data output enable on X550 hardware.
**/
static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN(hw);
+
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(IXGBE_I2C_T_FALL);
+ }
+
if (*i2cctl & IXGBE_I2C_DATA_IN(hw))
return true;
return false;
**/
static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
+ u32 i2cctl;
u32 i;
ixgbe_i2c_start(hw);
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL(hw));
ixgbe_set_i2c_data(hw, &i2cctl, 1);
projects / karo-tx-linux.git / blobdiff