mlxsw_reg_sspr_system_port_set(payload, local_port);
}
+/* SFDAT - Switch Filtering Database Aging Time
+ * --------------------------------------------
+ * Controls the Switch aging time. Aging time is able to be set per Switch
+ * Partition.
+ */
+#define MLXSW_REG_SFDAT_ID 0x2009
+#define MLXSW_REG_SFDAT_LEN 0x8
+
+static const struct mlxsw_reg_info mlxsw_reg_sfdat = {
+ .id = MLXSW_REG_SFDAT_ID,
+ .len = MLXSW_REG_SFDAT_LEN,
+};
+
+/* reg_sfdat_swid
+ * Switch partition ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, sfdat, swid, 0x00, 24, 8);
+
+/* reg_sfdat_age_time
+ * Aging time in seconds
+ * Min - 10 seconds
+ * Max - 1,000,000 seconds
+ * Default is 300 seconds.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, sfdat, age_time, 0x04, 0, 20);
+
+static inline void mlxsw_reg_sfdat_pack(char *payload, u32 age_time)
+{
+ MLXSW_REG_ZERO(sfdat, payload);
+ mlxsw_reg_sfdat_swid_set(payload, 0);
+ mlxsw_reg_sfdat_age_time_set(payload, age_time);
+}
+
/* SFD - Switch Filtering Database
* -------------------------------
* The following register defines the access to the filtering database.
MLXSW_REG_SFD_REC_LEN, 0x0C, false);
/* reg_sfd_uc_sub_port
- * LAG sub port.
- * Must be 0 if multichannel VEPA is not enabled.
+ * VEPA channel on local port.
+ * Valid only if local port is a non-stacking port. Must be 0 if multichannel
+ * VEPA is not enabled.
* Access: RW
*/
MLXSW_ITEM32_INDEXED(reg, sfd, uc_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8,
mlxsw_reg_sfd_uc_system_port_set(payload, rec_index, local_port);
}
-static inline void
-mlxsw_reg_sfd_uc_unpack(char *payload, int rec_index,
- char *mac, u16 *p_vid,
- u8 *p_local_port)
+static inline void mlxsw_reg_sfd_uc_unpack(char *payload, int rec_index,
+ char *mac, u16 *p_vid,
+ u8 *p_local_port)
{
mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac);
*p_vid = mlxsw_reg_sfd_uc_fid_vid_get(payload, rec_index);
MLXSW_ITEM_BUF_INDEXED(reg, sfn, rec_mac, MLXSW_REG_SFN_BASE_LEN, 6,
MLXSW_REG_SFN_REC_LEN, 0x02);
-/* reg_sfd_mac_sub_port
+/* reg_sfn_mac_sub_port
* VEPA channel on the local port.
* 0 if multichannel VEPA is not enabled.
* Access: RO
MLXSW_ITEM32_INDEXED(reg, sfn, mac_sub_port, MLXSW_REG_SFN_BASE_LEN, 16, 8,
MLXSW_REG_SFN_REC_LEN, 0x08, false);
-/* reg_sfd_mac_fid
+/* reg_sfn_mac_fid
* Filtering identifier.
* Access: RO
*/
MLXSW_ITEM32_INDEXED(reg, sfn, mac_fid, MLXSW_REG_SFN_BASE_LEN, 0, 16,
MLXSW_REG_SFN_REC_LEN, 0x08, false);
-/* reg_sfd_mac_system_port
+/* reg_sfn_mac_system_port
* Unique port identifier for the final destination of the packet.
* Access: RO
*/
mlxsw_reg_spmlr_learn_mode_set(payload, mode);
}
+/* SVFA - Switch VID to FID Allocation Register
+ * --------------------------------------------
+ * Controls the VID to FID mapping and {Port, VID} to FID mapping for
+ * virtualized ports.
+ */
+#define MLXSW_REG_SVFA_ID 0x201C
+#define MLXSW_REG_SVFA_LEN 0x10
+
+static const struct mlxsw_reg_info mlxsw_reg_svfa = {
+ .id = MLXSW_REG_SVFA_ID,
+ .len = MLXSW_REG_SVFA_LEN,
+};
+
+/* reg_svfa_swid
+ * Switch partition ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, svfa, swid, 0x00, 24, 8);
+
+/* reg_svfa_local_port
+ * Local port number.
+ * Access: Index
+ *
+ * Note: Reserved for 802.1Q FIDs.
+ */
+MLXSW_ITEM32(reg, svfa, local_port, 0x00, 16, 8);
+
+enum mlxsw_reg_svfa_mt {
+ MLXSW_REG_SVFA_MT_VID_TO_FID,
+ MLXSW_REG_SVFA_MT_PORT_VID_TO_FID,
+};
+
+/* reg_svfa_mapping_table
+ * Mapping table:
+ * 0 - VID to FID
+ * 1 - {Port, VID} to FID
+ * Access: Index
+ *
+ * Note: Reserved for SwitchX-2.
+ */
+MLXSW_ITEM32(reg, svfa, mapping_table, 0x00, 8, 3);
+
+/* reg_svfa_v
+ * Valid.
+ * Valid if set.
+ * Access: RW
+ *
+ * Note: Reserved for SwitchX-2.
+ */
+MLXSW_ITEM32(reg, svfa, v, 0x00, 0, 1);
+
+/* reg_svfa_fid
+ * Filtering ID.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, svfa, fid, 0x04, 16, 16);
+
+/* reg_svfa_vid
+ * VLAN ID.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, svfa, vid, 0x04, 0, 12);
+
+/* reg_svfa_counter_set_type
+ * Counter set type for flow counters.
+ * Access: RW
+ *
+ * Note: Reserved for SwitchX-2.
+ */
+MLXSW_ITEM32(reg, svfa, counter_set_type, 0x08, 24, 8);
+
+/* reg_svfa_counter_index
+ * Counter index for flow counters.
+ * Access: RW
+ *
+ * Note: Reserved for SwitchX-2.
+ */
+MLXSW_ITEM32(reg, svfa, counter_index, 0x08, 0, 24);
+
+static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port,
+ enum mlxsw_reg_svfa_mt mt, bool valid,
+ u16 fid, u16 vid)
+{
+ MLXSW_REG_ZERO(svfa, payload);
+ local_port = mt == MLXSW_REG_SVFA_MT_VID_TO_FID ? 0 : local_port;
+ mlxsw_reg_svfa_swid_set(payload, 0);
+ mlxsw_reg_svfa_local_port_set(payload, local_port);
+ mlxsw_reg_svfa_mapping_table_set(payload, mt);
+ mlxsw_reg_svfa_v_set(payload, valid);
+ mlxsw_reg_svfa_fid_set(payload, fid);
+ mlxsw_reg_svfa_vid_set(payload, vid);
+}
+
+/* SVPE - Switch Virtual-Port Enabling Register
+ * --------------------------------------------
+ * Enables port virtualization.
+ */
+#define MLXSW_REG_SVPE_ID 0x201E
+#define MLXSW_REG_SVPE_LEN 0x4
+
+static const struct mlxsw_reg_info mlxsw_reg_svpe = {
+ .id = MLXSW_REG_SVPE_ID,
+ .len = MLXSW_REG_SVPE_LEN,
+};
+
+/* reg_svpe_local_port
+ * Local port number
+ * Access: Index
+ *
+ * Note: CPU port is not supported (uses VLAN mode only).
+ */
+MLXSW_ITEM32(reg, svpe, local_port, 0x00, 16, 8);
+
+/* reg_svpe_vp_en
+ * Virtual port enable.
+ * 0 - Disable, VLAN mode (VID to FID).
+ * 1 - Enable, Virtual port mode ({Port, VID} to FID).
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, svpe, vp_en, 0x00, 8, 1);
+
+static inline void mlxsw_reg_svpe_pack(char *payload, u8 local_port,
+ bool enable)
+{
+ MLXSW_REG_ZERO(svpe, payload);
+ mlxsw_reg_svpe_local_port_set(payload, local_port);
+ mlxsw_reg_svpe_vp_en_set(payload, enable);
+}
+
/* SFMR - Switch FID Management Register
* -------------------------------------
* Creates and configures FIDs.
mlxsw_reg_sfmr_vv_set(payload, false);
}
+/* SPVMLR - Switch Port VLAN MAC Learning Register
+ * -----------------------------------------------
+ * Controls the switch MAC learning policy per {Port, VID}.
+ */
+#define MLXSW_REG_SPVMLR_ID 0x2020
+#define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */
+#define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */
+#define MLXSW_REG_SPVMLR_REC_MAX_COUNT 256
+#define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \
+ MLXSW_REG_SPVMLR_REC_LEN * \
+ MLXSW_REG_SPVMLR_REC_MAX_COUNT)
+
+static const struct mlxsw_reg_info mlxsw_reg_spvmlr = {
+ .id = MLXSW_REG_SPVMLR_ID,
+ .len = MLXSW_REG_SPVMLR_LEN,
+};
+
+/* reg_spvmlr_local_port
+ * Local ingress port.
+ * Access: Index
+ *
+ * Note: CPU port is not supported.
+ */
+MLXSW_ITEM32(reg, spvmlr, local_port, 0x00, 16, 8);
+
+/* reg_spvmlr_num_rec
+ * Number of records to update.
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, spvmlr, num_rec, 0x00, 0, 8);
+
+/* reg_spvmlr_rec_learn_enable
+ * 0 - Disable learning for {Port, VID}.
+ * 1 - Enable learning for {Port, VID}.
+ * Access: RW
+ */
+MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_learn_enable, MLXSW_REG_SPVMLR_BASE_LEN,
+ 31, 1, MLXSW_REG_SPVMLR_REC_LEN, 0x00, false);
+
+/* reg_spvmlr_rec_vid
+ * VLAN ID to be added/removed from port or for querying.
+ * Access: Index
+ */
+MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_vid, MLXSW_REG_SPVMLR_BASE_LEN, 0, 12,
+ MLXSW_REG_SPVMLR_REC_LEN, 0x00, false);
+
+static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port,
+ u16 vid_begin, u16 vid_end,
+ bool learn_enable)
+{
+ int num_rec = vid_end - vid_begin + 1;
+ int i;
+
+ WARN_ON(num_rec < 1 || num_rec > MLXSW_REG_SPVMLR_REC_MAX_COUNT);
+
+ MLXSW_REG_ZERO(spvmlr, payload);
+ mlxsw_reg_spvmlr_local_port_set(payload, local_port);
+ mlxsw_reg_spvmlr_num_rec_set(payload, num_rec);
+
+ for (i = 0; i < num_rec; i++) {
+ mlxsw_reg_spvmlr_rec_learn_enable_set(payload, i, learn_enable);
+ mlxsw_reg_spvmlr_rec_vid_set(payload, i, vid_begin + i);
+ }
+}
+
/* PMLP - Ports Module to Local Port Register
* ------------------------------------------
* Configures the assignment of modules to local ports.
return "SPAD";
case MLXSW_REG_SSPR_ID:
return "SSPR";
+ case MLXSW_REG_SFDAT_ID:
+ return "SFDAT";
case MLXSW_REG_SFD_ID:
return "SFD";
case MLXSW_REG_SFN_ID:
return "SFTR";
case MLXSW_REG_SPMLR_ID:
return "SPMLR";
+ case MLXSW_REG_SVFA_ID:
+ return "SVFA";
+ case MLXSW_REG_SVPE_ID:
+ return "SVPE";
case MLXSW_REG_SFMR_ID:
return "SFMR";
+ case MLXSW_REG_SPVMLR_ID:
+ return "SPVMLR";
case MLXSW_REG_PMLP_ID:
return "PMLP";
case MLXSW_REG_PMTU_ID:
projects / karo-tx-linux.git / blobdiff