module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR);
MODULE_PARM_DESC(roamoff, "do not use internal roaming engine");
-/* Quarter dBm units to mW
- * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153
- * Table is offset so the last entry is largest mW value that fits in
- * a u16.
- */
-
-#define QDBM_OFFSET 153 /* Offset for first entry */
-#define QDBM_TABLE_LEN 40 /* Table size */
-
-/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET.
- * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2
- */
-#define QDBM_TABLE_LOW_BOUND 6493 /* Low bound */
-
-/* Largest mW value that will round down to the last table entry,
- * QDBM_OFFSET + QDBM_TABLE_LEN-1.
- * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) +
- * mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2.
- */
-#define QDBM_TABLE_HIGH_BOUND 64938 /* High bound */
-
-static const u16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = {
-/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */
-/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000,
-/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849,
-/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119,
-/* 177: */ 26607, 28184, 29854, 31623, 33497, 35481, 37584, 39811,
-/* 185: */ 42170, 44668, 47315, 50119, 53088, 56234, 59566, 63096
-};
-
-static u16 brcmf_qdbm_to_mw(u8 qdbm)
-{
- uint factor = 1;
- int idx = qdbm - QDBM_OFFSET;
-
- if (idx >= QDBM_TABLE_LEN)
- /* clamp to max u16 mW value */
- return 0xFFFF;
-
- /* scale the qdBm index up to the range of the table 0-40
- * where an offset of 40 qdBm equals a factor of 10 mW.
- */
- while (idx < 0) {
- idx += 40;
- factor *= 10;
- }
-
- /* return the mW value scaled down to the correct factor of 10,
- * adding in factor/2 to get proper rounding.
- */
- return (nqdBm_to_mW_map[idx] + factor / 2) / factor;
-}
-
-static u8 brcmf_mw_to_qdbm(u16 mw)
-{
- u8 qdbm;
- int offset;
- uint mw_uint = mw;
- uint boundary;
-
- /* handle boundary case */
- if (mw_uint <= 1)
- return 0;
-
- offset = QDBM_OFFSET;
-
- /* move mw into the range of the table */
- while (mw_uint < QDBM_TABLE_LOW_BOUND) {
- mw_uint *= 10;
- offset -= 40;
- }
-
- for (qdbm = 0; qdbm < QDBM_TABLE_LEN - 1; qdbm++) {
- boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm + 1] -
- nqdBm_to_mW_map[qdbm]) / 2;
- if (mw_uint < boundary)
- break;
- }
-
- qdbm += (u8) offset;
-
- return qdbm;
-}
static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
struct cfg80211_chan_def *ch)
s32 err = 0;
brcmf_dbg(TRACE, "Enter, idx=%d, type=%d\n", ifp->bssidx, type);
+
+ /* WAR: There are a number of p2p interface related problems which
+ * need to be handled initially (before doing the validate).
+ * wpa_supplicant tends to do iface changes on p2p device/client/go
+ * which are not always possible/allowed. However we need to return
+ * OK otherwise the wpa_supplicant wont start. The situation differs
+ * on configuration and setup (p2pon=1 module param). The first check
+ * is to see if the request is a change to station for p2p iface.
+ */
+ if ((type == NL80211_IFTYPE_STATION) &&
+ ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) ||
+ (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO) ||
+ (vif->wdev.iftype == NL80211_IFTYPE_P2P_DEVICE))) {
+ brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n");
+ /* Now depending on whether module param p2pon=1 was used the
+ * response needs to be either 0 or EOPNOTSUPP. The reason is
+ * that if p2pon=1 is used, but a newer supplicant is used then
+ * we should return an error, as this combination wont work.
+ * In other situations 0 is returned and supplicant will start
+ * normally. It will give a trace in cfg80211, but it is the
+ * only way to get it working. Unfortunately this will result
+ * in situation where we wont support new supplicant in
+ * combination with module param p2pon=1, but that is the way
+ * it is. If the user tries this then unloading of driver might
+ * fail/lock.
+ */
+ if (cfg->p2p.p2pdev_dynamically)
+ return -EOPNOTSUPP;
+ else
+ return 0;
+ }
err = brcmf_vif_change_validate(wiphy_to_cfg(wiphy), vif, type);
if (err) {
brcmf_err("iface validation failed: err=%d\n", err);
infra = 0;
break;
case NL80211_IFTYPE_STATION:
- /* Ignore change for p2p IF. Unclear why supplicant does this */
- if ((vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) ||
- (vif->wdev.iftype == NL80211_IFTYPE_P2P_GO)) {
- brcmf_dbg(TRACE, "Ignoring cmd for p2p if\n");
- /* WAR: It is unexpected to get a change of VIF for P2P
- * IF, but it happens. The request can not be handled
- * but returning EPERM causes a crash. Returning 0
- * without setting ieee80211_ptr->iftype causes trace
- * (WARN_ON) but it works with wpa_supplicant
- */
- return 0;
- }
infra = 1;
break;
case NL80211_IFTYPE_AP:
err = brcmf_p2p_ifchange(cfg, BRCMF_FIL_P2P_IF_GO);
}
if (!err) {
- set_bit(BRCMF_VIF_STATUS_AP_CREATING, &vif->sme_state);
brcmf_dbg(INFO, "IF Type = AP\n");
}
} else {
brcmf_cfg80211_set_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
enum nl80211_tx_power_setting type, s32 mbm)
{
-
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct net_device *ndev = cfg_to_ndev(cfg);
struct brcmf_if *ifp = netdev_priv(ndev);
- u16 txpwrmw;
- s32 err = 0;
- s32 disable = 0;
- s32 dbm = MBM_TO_DBM(mbm);
+ s32 err;
+ s32 disable;
+ u32 qdbm = 127;
- brcmf_dbg(TRACE, "Enter\n");
+ brcmf_dbg(TRACE, "Enter %d %d\n", type, mbm);
if (!check_vif_up(ifp->vif))
return -EIO;
break;
case NL80211_TX_POWER_LIMITED:
case NL80211_TX_POWER_FIXED:
- if (dbm < 0) {
+ if (mbm < 0) {
brcmf_err("TX_POWER_FIXED - dbm is negative\n");
err = -EINVAL;
goto done;
}
+ qdbm = MBM_TO_DBM(4 * mbm);
+ if (qdbm > 127)
+ qdbm = 127;
+ qdbm |= WL_TXPWR_OVERRIDE;
break;
+ default:
+ brcmf_err("Unsupported type %d\n", type);
+ err = -EINVAL;
+ goto done;
}
/* Make sure radio is off or on as far as software is concerned */
disable = WL_RADIO_SW_DISABLE << 16;
if (err)
brcmf_err("WLC_SET_RADIO error (%d)\n", err);
- if (dbm > 0xffff)
- txpwrmw = 0xffff;
- else
- txpwrmw = (u16) dbm;
- err = brcmf_fil_iovar_int_set(ifp, "qtxpower",
- (s32)brcmf_mw_to_qdbm(txpwrmw));
+ err = brcmf_fil_iovar_int_set(ifp, "qtxpower", qdbm);
if (err)
brcmf_err("qtxpower error (%d)\n", err);
- cfg->conf->tx_power = dbm;
done:
- brcmf_dbg(TRACE, "Exit\n");
+ brcmf_dbg(TRACE, "Exit %d (qdbm)\n", qdbm & ~WL_TXPWR_OVERRIDE);
return err;
}
-static s32 brcmf_cfg80211_get_tx_power(struct wiphy *wiphy,
- struct wireless_dev *wdev,
- s32 *dbm)
+static s32
+brcmf_cfg80211_get_tx_power(struct wiphy *wiphy, struct wireless_dev *wdev,
+ s32 *dbm)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
- struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
- s32 txpwrdbm;
- u8 result;
- s32 err = 0;
+ struct net_device *ndev = cfg_to_ndev(cfg);
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ s32 qdbm = 0;
+ s32 err;
brcmf_dbg(TRACE, "Enter\n");
if (!check_vif_up(ifp->vif))
return -EIO;
- err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &txpwrdbm);
+ err = brcmf_fil_iovar_int_get(ifp, "qtxpower", &qdbm);
if (err) {
brcmf_err("error (%d)\n", err);
goto done;
}
-
- result = (u8) (txpwrdbm & ~WL_TXPWR_OVERRIDE);
- *dbm = (s32) brcmf_qdbm_to_mw(result);
+ *dbm = (qdbm & ~WL_TXPWR_OVERRIDE) / 4;
done:
- brcmf_dbg(TRACE, "Exit\n");
+ brcmf_dbg(TRACE, "Exit (0x%x %d)\n", qdbm, *dbm);
return err;
}
static s32
brcmf_cfg80211_config_default_key(struct wiphy *wiphy, struct net_device *ndev,
- u8 key_idx, bool unicast, bool multicast)
+ u8 key_idx, bool unicast, bool multicast)
{
struct brcmf_if *ifp = netdev_priv(ndev);
u32 index;
struct brcmf_sta_info_le sta_info_le;
u32 sta_flags;
u32 is_tdls_peer;
+ s32 total_rssi;
+ s32 count_rssi;
+ u32 i;
brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
if (!check_vif_up(ifp->vif))
sinfo->rx_packets += le32_to_cpu(sta_info_le.rx_mcast_pkts);
if (sinfo->tx_packets) {
sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE);
- sinfo->txrate.legacy = le32_to_cpu(sta_info_le.tx_rate);
- sinfo->txrate.legacy /= 100;
+ sinfo->txrate.legacy =
+ le32_to_cpu(sta_info_le.tx_rate) / 100;
}
if (sinfo->rx_packets) {
sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE);
- sinfo->rxrate.legacy = le32_to_cpu(sta_info_le.rx_rate);
- sinfo->rxrate.legacy /= 100;
+ sinfo->rxrate.legacy =
+ le32_to_cpu(sta_info_le.rx_rate) / 100;
}
if (le16_to_cpu(sta_info_le.ver) >= 4) {
sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES);
sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES);
sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
}
+ total_rssi = 0;
+ count_rssi = 0;
+ for (i = 0; i < BRCMF_ANT_MAX; i++) {
+ if (sta_info_le.rssi[i]) {
+ sinfo->chain_signal_avg[count_rssi] =
+ sta_info_le.rssi[i];
+ sinfo->chain_signal[count_rssi] =
+ sta_info_le.rssi[i];
+ total_rssi += sta_info_le.rssi[i];
+ count_rssi++;
+ }
+ }
+ if (count_rssi) {
+ sinfo->filled |= BIT(NL80211_STA_INFO_CHAIN_SIGNAL);
+ sinfo->chains = count_rssi;
+
+ sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
+ total_rssi /= count_rssi;
+ sinfo->signal = total_rssi;
+ }
}
done:
brcmf_dbg(TRACE, "Exit\n");
return err;
}
+static int
+brcmf_cfg80211_dump_station(struct wiphy *wiphy, struct net_device *ndev,
+ int idx, u8 *mac, struct station_info *sinfo)
+{
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ s32 err;
+
+ brcmf_dbg(TRACE, "Enter, idx %d\n", idx);
+
+ if (idx == 0) {
+ cfg->assoclist.count = cpu_to_le32(BRCMF_MAX_ASSOCLIST);
+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_ASSOCLIST,
+ &cfg->assoclist,
+ sizeof(cfg->assoclist));
+ if (err) {
+ brcmf_err("BRCMF_C_GET_ASSOCLIST unsupported, err=%d\n",
+ err);
+ cfg->assoclist.count = 0;
+ return -EOPNOTSUPP;
+ }
+ }
+ if (idx < le32_to_cpu(cfg->assoclist.count)) {
+ memcpy(mac, cfg->assoclist.mac[idx], ETH_ALEN);
+ return brcmf_cfg80211_get_station(wiphy, ndev, mac, sinfo);
+ }
+ return -ENOENT;
+}
+
static s32
brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev,
bool enabled, s32 timeout)
brcmf_dbg(TRACE, "GO mode configuration complete\n");
}
- clear_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state);
set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
+ brcmf_net_setcarrier(ifp, true);
exit:
if ((err) && (!mbss)) {
}
brcmf_set_mpc(ifp, 1);
brcmf_configure_arp_offload(ifp, true);
- set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state);
clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state);
+ brcmf_net_setcarrier(ifp, false);
return err;
}
.join_ibss = brcmf_cfg80211_join_ibss,
.leave_ibss = brcmf_cfg80211_leave_ibss,
.get_station = brcmf_cfg80211_get_station,
+ .dump_station = brcmf_cfg80211_dump_station,
.set_tx_power = brcmf_cfg80211_set_tx_power,
.get_tx_power = brcmf_cfg80211_get_tx_power,
.add_key = brcmf_cfg80211_add_key,
ifp = netdev_priv(ndev);
vif = ifp->vif;
- brcmf_free_vif(vif);
+ if (vif)
+ brcmf_free_vif(vif);
free_netdev(ndev);
}
brcmf_dbg(CONN, "AP mode link down\n");
complete(&cfg->vif_disabled);
if (ifp->vif->mbss)
- brcmf_remove_interface(ifp->drvr, ifp->bssidx);
+ brcmf_remove_interface(ifp);
return 0;
}
&ifp->vif->sme_state);
} else
brcmf_bss_connect_done(cfg, ndev, e, true);
+ brcmf_net_setcarrier(ifp, true);
} else if (brcmf_is_linkdown(e)) {
brcmf_dbg(CONN, "Linkdown\n");
if (!brcmf_is_ibssmode(ifp->vif)) {
brcmf_init_prof(ndev_to_prof(ndev));
if (ndev != cfg_to_ndev(cfg))
complete(&cfg->vif_disabled);
+ brcmf_net_setcarrier(ifp, false);
} else if (brcmf_is_nonetwork(cfg, e)) {
if (brcmf_is_ibssmode(ifp->vif))
clear_bit(BRCMF_VIF_STATUS_CONNECTING,
}
struct brcmf_cfg80211_info *brcmf_cfg80211_attach(struct brcmf_pub *drvr,
- struct device *busdev)
+ struct device *busdev,
+ bool p2pdev_forced)
{
- struct net_device *ndev = drvr->iflist[0]->ndev;
+ struct net_device *ndev = brcmf_get_ifp(drvr, 0)->ndev;
struct brcmf_cfg80211_info *cfg;
struct wiphy *wiphy;
struct brcmf_cfg80211_vif *vif;
else
*cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
}
+ /* p2p might require that "if-events" get processed by fweh. So
+ * activate the already registered event handlers now and activate
+ * the rest when initialization has completed. drvr->config needs to
+ * be assigned before activating events.
+ */
+ drvr->config = cfg;
+ err = brcmf_fweh_activate_events(ifp);
+ if (err) {
+ brcmf_err("FWEH activation failed (%d)\n", err);
+ goto wiphy_unreg_out;
+ }
- err = brcmf_p2p_attach(cfg);
+ err = brcmf_p2p_attach(cfg, p2pdev_forced);
if (err) {
brcmf_err("P2P initilisation failed (%d)\n", err);
goto wiphy_unreg_out;
brcmf_notify_tdls_peer_event);
}
+ /* (re-) activate FWEH event handling */
+ err = brcmf_fweh_activate_events(ifp);
+ if (err) {
+ brcmf_err("FWEH activation failed (%d)\n", err);
+ goto wiphy_unreg_out;
+ }
+
return cfg;
wiphy_unreg_out:
priv_out:
wl_deinit_priv(cfg);
brcmf_free_vif(vif);
+ ifp->vif = NULL;
wiphy_out:
brcmf_free_wiphy(wiphy);
return NULL;
projects / karo-tx-linux.git / blobdiff