NULL, 0, 1000);
}
+static char *to_led_name(int selector)
+{
+ switch (selector) {
+ case HUB_LED_AMBER:
+ return "amber";
+ case HUB_LED_GREEN:
+ return "green";
+ case HUB_LED_OFF:
+ return "off";
+ case HUB_LED_AUTO:
+ return "auto";
+ default:
+ return "??";
+ }
+}
+
/*
* USB 2.0 spec Section 11.24.2.7.1.10 and table 11-7
* for info about using port indicators
*/
-static void set_port_led(
- struct usb_hub *hub,
- int port1,
- int selector
-)
+static void set_port_led(struct usb_hub *hub, int port1, int selector)
{
- int status = set_port_feature(hub->hdev, (selector << 8) | port1,
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ int status;
+
+ status = set_port_feature(hub->hdev, (selector << 8) | port1,
USB_PORT_FEAT_INDICATOR);
- if (status < 0)
- dev_dbg (hub->intfdev,
- "port %d indicator %s status %d\n",
- port1,
- ({ char *s; switch (selector) {
- case HUB_LED_AMBER: s = "amber"; break;
- case HUB_LED_GREEN: s = "green"; break;
- case HUB_LED_OFF: s = "off"; break;
- case HUB_LED_AUTO: s = "auto"; break;
- default: s = "??"; break;
- } s; }),
- status);
+ dev_dbg(&port_dev->dev, "indicator %s status %d\n",
+ to_led_name(selector), status);
}
#define LED_CYCLE_PERIOD ((2*HZ)/3)
msleep(HUB_DEBOUNCE_STEP);
}
if (total_time >= HUB_DEBOUNCE_TIMEOUT)
- dev_warn(hub->intfdev, "Could not disable port %d after %d ms\n",
- port1, total_time);
+ dev_warn(&hub->ports[port1 - 1]->dev,
+ "Could not disable after %d ms\n", total_time);
return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
}
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *hdev = hub->hdev;
int ret = 0;
- if (hub->ports[port1 - 1]->child && set_state)
- usb_set_device_state(hub->ports[port1 - 1]->child,
- USB_STATE_NOTATTACHED);
+ if (port_dev->child && set_state)
+ usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
if (!hub->error) {
if (hub_is_superspeed(hub->hdev))
ret = hub_usb3_port_disable(hub, port1);
USB_PORT_FEAT_ENABLE);
}
if (ret && ret != -ENODEV)
- dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
- port1, ret);
+ dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
return ret;
}
*/
static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
{
- dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1);
+ dev_dbg(&hub->ports[port1 - 1]->dev, "logical disconnect\n");
hub_port_disable(hub, port1, 1);
/* FIXME let caller ask to power down the port:
}
init2:
- /* Check each port and set hub->change_bits to let khubd know
+ /*
+ * Check each port and set hub->change_bits to let khubd know
* which ports need attention.
*/
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
- struct usb_device *udev = hub->ports[port1 - 1]->child;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
u16 portstatus, portchange;
portstatus = portchange = 0;
status = hub_port_status(hub, port1, &portstatus, &portchange);
if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
- dev_dbg(hub->intfdev,
- "port %d: status %04x change %04x\n",
- port1, portstatus, portchange);
+ dev_dbg(&port_dev->dev, "status %04x change %04x\n",
+ portstatus, portchange);
- /* After anything other than HUB_RESUME (i.e., initialization
+ /*
+ * After anything other than HUB_RESUME (i.e., initialization
* or any sort of reset), every port should be disabled.
* Unconnected ports should likewise be disabled (paranoia),
* and so should ports for which we have no usb_device.
if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
delay = HUB_LONG_RESET_TIME;
- dev_dbg (hub->intfdev,
- "port %d not %sreset yet, waiting %dms\n",
- port1, warm ? "warm " : "", delay);
+ dev_dbg(&hub->ports[port1 - 1]->dev,
+ "not %sreset yet, waiting %dms\n",
+ warm ? "warm " : "", delay);
}
if ((portstatus & USB_PORT_STAT_RESET))
{
int i, status;
u16 portchange, portstatus;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
if (!hub_is_superspeed(hub->hdev)) {
if (warm) {
if (status == -ENODEV) {
; /* The hub is gone */
} else if (status) {
- dev_err(hub->intfdev,
- "cannot %sreset port %d (err = %d)\n",
- warm ? "warm " : "", port1, status);
+ dev_err(&port_dev->dev,
+ "cannot %sreset (err = %d)\n",
+ warm ? "warm " : "", status);
} else {
status = hub_port_wait_reset(hub, port1, udev, delay,
warm);
* hot or warm reset failed. Try another warm reset.
*/
if (!warm) {
- dev_dbg(hub->intfdev, "hot reset failed, warm reset port %d\n",
- port1);
+ dev_dbg(&port_dev->dev,
+ "hot reset failed, warm reset\n");
warm = true;
}
}
- dev_dbg (hub->intfdev,
- "port %d not enabled, trying %sreset again...\n",
- port1, warm ? "warm " : "");
+ dev_dbg(&port_dev->dev,
+ "not enabled, trying %sreset again...\n",
+ warm ? "warm " : "");
delay = HUB_LONG_RESET_TIME;
}
- dev_err (hub->intfdev,
- "Cannot enable port %i. Maybe the USB cable is bad?\n",
- port1);
+ dev_err(&port_dev->dev, "Cannot enable. Maybe the USB cable is bad?\n");
done:
if (!hub_is_superspeed(hub->hdev))
struct usb_hub *hub, int port1,
int status, unsigned portchange, unsigned portstatus)
{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+
/* Is the device still present? */
if (status || port_is_suspended(hub, portstatus) ||
!port_is_power_on(hub, portstatus) ||
}
if (status) {
- dev_dbg(hub->intfdev,
- "port %d status %04x.%04x after resume, %d\n",
- port1, portchange, portstatus, status);
+ dev_dbg(&port_dev->dev, "status %04x.%04x after resume, %d\n",
+ portchange, portstatus, status);
} else if (udev->reset_resume) {
/* Late port handoff can set status-change bits */
status = 0;
}
if (status) {
- dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
- port1, status);
+ dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status);
/* Try to enable USB3 LPM and LTM again */
usb_unlocked_enable_lpm(udev);
if (status == 0 && !port_is_suspended(hub, portstatus))
goto SuspendCleared;
- /* dev_dbg(hub->intfdev, "resume port %d\n", port1); */
-
set_bit(port1, hub->busy_bits);
/* see 7.1.7.7; affects power usage, but not budgeting */
status = usb_clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
if (status) {
- dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
- port1, status);
+ dev_dbg(&port_dev->dev, "can't resume, status %d\n", status);
} else {
/* drive resume for at least 20 msec */
dev_dbg(&udev->dev, "usb %sresume\n",
*/
hub->wakeup_enabled_descendants = 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
- struct usb_device *udev;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
- udev = hub->ports[port1 - 1]->child;
if (udev && udev->can_submit) {
- dev_warn(&intf->dev, "port %d not suspended yet\n",
- port1);
+ dev_warn(&port_dev->dev, "not suspended yet\n");
if (PMSG_IS_AUTO(msg))
return -EBUSY;
}
int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected)
{
int ret;
- int total_time, stable_time = 0;
u16 portchange, portstatus;
unsigned connection = 0xffff;
+ int total_time, stable_time = 0;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
ret = hub_port_status(hub, port1, &portstatus, &portchange);
msleep(HUB_DEBOUNCE_STEP);
}
- dev_dbg (hub->intfdev,
- "debounce: port %d: total %dms stable %dms status 0x%x\n",
- port1, total_time, stable_time, portstatus);
+ dev_dbg(&port_dev->dev, "debounce total %dms stable %dms status 0x%x\n",
+ total_time, stable_time, portstatus);
if (stable_time < HUB_DEBOUNCE_STABLE)
return -ETIMEDOUT;
*/
static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
{
- int connect_type;
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
+ int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
if (!udev->usb2_hw_lpm_capable)
return;
- connect_type = usb_get_hub_port_connect_type(udev->parent,
- udev->portnum);
+ if (hub)
+ connect_type = hub->ports[udev->portnum - 1]->connect_type;
if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) ||
connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
remaining = hdev->bus_mA - hub->descriptor->bHubContrCurrent;
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
- struct usb_device *udev = hub->ports[port1 - 1]->child;
- int delta;
- unsigned unit_load;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
+ unsigned unit_load;
+ int delta;
if (!udev)
continue;
else
delta = 8;
if (delta > hub->mA_per_port)
- dev_warn(&udev->dev,
- "%dmA is over %umA budget for port %d!\n",
- delta, hub->mA_per_port, port1);
+ dev_warn(&port_dev->dev, "%dmA is over %umA budget!\n",
+ delta, hub->mA_per_port);
remaining -= delta;
}
if (remaining < 0) {
u16 portstatus, u16 portchange)
{
struct usb_device *hdev = hub->hdev;
- struct device *hub_dev = hub->intfdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
+ struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *udev;
int status, i;
unsigned unit_load;
- dev_dbg (hub_dev,
- "port %d, status %04x, change %04x, %s\n",
- port1, portstatus, portchange, portspeed(hub, portstatus));
+ dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n",
+ portstatus, portchange, portspeed(hub, portstatus));
if (hub->has_indicators) {
set_port_led(hub, port1, HUB_LED_AUTO);
#endif
/* Try to resuscitate an existing device */
- udev = hub->ports[port1 - 1]->child;
+ udev = port_dev->child;
if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
udev->state != USB_STATE_NOTATTACHED) {
usb_lock_device(udev);
if (hcd->phy && !hdev->parent &&
!(portstatus & USB_PORT_STAT_CONNECTION))
usb_phy_notify_disconnect(hcd->phy, udev->speed);
- usb_disconnect(&hub->ports[port1 - 1]->child);
+ usb_disconnect(&port_dev->child);
}
clear_bit(port1, hub->change_bits);
status = hub_port_debounce_be_stable(hub, port1);
if (status < 0) {
if (status != -ENODEV && printk_ratelimit())
- dev_err(hub_dev, "connect-debounce failed, "
- "port %d disabled\n", port1);
+ dev_err(&port_dev->dev,
+ "connect-debounce failed\n");
portstatus &= ~USB_PORT_STAT_CONNECTION;
} else {
portstatus = status;
*/
udev = usb_alloc_dev(hdev, hdev->bus, port1);
if (!udev) {
- dev_err (hub_dev,
- "couldn't allocate port %d usb_device\n",
- port1);
+ dev_err(&port_dev->dev,
+ "couldn't allocate usb_device\n");
goto done;
}
if (hdev->state == USB_STATE_NOTATTACHED)
status = -ENOTCONN;
else
- hub->ports[port1 - 1]->child = udev;
+ port_dev->child = udev;
spin_unlock_irq(&device_state_lock);
/* Run it through the hoops (find a driver, etc) */
status = usb_new_device(udev);
if (status) {
spin_lock_irq(&device_state_lock);
- hub->ports[port1 - 1]->child = NULL;
+ port_dev->child = NULL;
spin_unlock_irq(&device_state_lock);
}
}
status = hub_power_remaining(hub);
if (status)
- dev_dbg(hub_dev, "%dmA power budget left\n", status);
+ dev_dbg(hub->intfdev, "%dmA power budget left\n", status);
return;
!hcd->driver->port_handed_over ||
!(hcd->driver->port_handed_over)(hcd, port1)) {
if (status != -ENOTCONN && status != -ENODEV)
- dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
- port1);
+ dev_err(&port_dev->dev,
+ "unable to enumerate USB device\n");
}
done:
static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
u16 portstatus, u16 portchange)
{
+ struct usb_port *port_dev = hub->ports[port - 1];
struct usb_device *hdev;
struct usb_device *udev;
int connect_change = 0;
int ret;
hdev = hub->hdev;
- udev = hub->ports[port - 1]->child;
+ udev = port_dev->child;
if (!hub_is_superspeed(hdev)) {
if (!(portchange & USB_PORT_STAT_C_SUSPEND))
return 0;
ret = -ENODEV;
hub_port_disable(hub, port, 1);
}
- dev_dbg(hub->intfdev, "resume on port %d, status %d\n",
- port, ret);
+ dev_dbg(&port_dev->dev, "resume, status %d\n", ret);
return connect_change;
}
/* deal with port status changes */
for (i = 1; i <= hdev->maxchild; i++) {
- struct usb_device *udev = hub->ports[i - 1]->child;
+ struct usb_port *port_dev = hub->ports[i - 1];
+ struct usb_device *udev = port_dev->child;
if (test_bit(i, hub->busy_bits))
continue;
if (portchange & USB_PORT_STAT_C_ENABLE) {
if (!connect_change)
- dev_dbg (hub_dev,
- "port %d enable change, "
- "status %08x\n",
- i, portstatus);
+ dev_dbg(&port_dev->dev,
+ "enable change, status %08x\n",
+ portstatus);
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_ENABLE);
* Works at least with mouse driver.
*/
if (!(portstatus & USB_PORT_STAT_ENABLE)
- && !connect_change
- && hub->ports[i - 1]->child) {
- dev_err (hub_dev,
- "port %i "
- "disabled by hub (EMI?), "
- "re-enabling...\n",
- i);
+ && !connect_change && udev) {
+ dev_err(&port_dev->dev,
+ "disabled by hub (EMI?), re-enabling...\n");
connect_change = 1;
}
}
u16 status = 0;
u16 unused;
- dev_dbg(hub_dev, "over-current change on port "
- "%d\n", i);
+ dev_dbg(&port_dev->dev, "over-current change\n");
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_OVER_CURRENT);
msleep(100); /* Cool down */
hub_power_on(hub, true);
hub_port_status(hub, i, &status, &unused);
if (status & USB_PORT_STAT_OVERCURRENT)
- dev_err(hub_dev, "over-current "
- "condition on port %d\n", i);
+ dev_err(&port_dev->dev,
+ "over-current condition\n");
}
if (portchange & USB_PORT_STAT_C_RESET) {
- dev_dbg (hub_dev,
- "reset change on port %d\n",
- i);
+ dev_dbg(&port_dev->dev, "reset change\n");
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_RESET);
}
if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
hub_is_superspeed(hub->hdev)) {
- dev_dbg(hub_dev,
- "warm reset change on port %d\n",
- i);
+ dev_dbg(&port_dev->dev, "warm reset change\n");
usb_clear_port_feature(hdev, i,
USB_PORT_FEAT_C_BH_PORT_RESET);
}
USB_PORT_FEAT_C_PORT_LINK_STATE);
}
if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
- dev_warn(hub_dev,
- "config error on port %d\n",
- i);
+ dev_warn(&port_dev->dev, "config error\n");
usb_clear_port_feature(hub->hdev, i,
USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
}
if (hub_port_warm_reset_required(hub, portstatus)) {
int status;
- dev_dbg(hub_dev, "warm reset port %d\n", i);
+ dev_dbg(&port_dev->dev, "warm reset\n");
if (!udev ||
!(portstatus & USB_PORT_STAT_CONNECTION) ||
udev->state == USB_STATE_NOTATTACHED) {
}
EXPORT_SYMBOL_GPL(usb_hub_find_child);
-/**
- * usb_set_hub_port_connect_type - set hub port connect type.
- * @hdev: USB device belonging to the usb hub
- * @port1: port num of the port
- * @type: connect type of the port
- */
-void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1,
- enum usb_port_connect_type type)
-{
- struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
-
- if (hub)
- hub->ports[port1 - 1]->connect_type = type;
-}
-
-/**
- * usb_get_hub_port_connect_type - Get the port's connect type
- * @hdev: USB device belonging to the usb hub
- * @port1: port num of the port
- *
- * Return: The connect type of the port if successful. Or
- * USB_PORT_CONNECT_TYPE_UNKNOWN if input params are invalid.
- */
-enum usb_port_connect_type
-usb_get_hub_port_connect_type(struct usb_device *hdev, int port1)
-{
- struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
-
- if (!hub)
- return USB_PORT_CONNECT_TYPE_UNKNOWN;
-
- return hub->ports[port1 - 1]->connect_type;
-}
-
void usb_hub_adjust_deviceremovable(struct usb_device *hdev,
struct usb_hub_descriptor *desc)
{
+ struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
enum usb_port_connect_type connect_type;
int i;
+ if (!hub)
+ return;
+
if (!hub_is_superspeed(hdev)) {
for (i = 1; i <= hdev->maxchild; i++) {
- connect_type = usb_get_hub_port_connect_type(hdev, i);
+ struct usb_port *port_dev = hub->ports[i - 1];
+ connect_type = port_dev->connect_type;
if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
u8 mask = 1 << (i%8);
if (!(desc->u.hs.DeviceRemovable[i/8] & mask)) {
- dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n",
- i);
+ dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
desc->u.hs.DeviceRemovable[i/8] |= mask;
}
}
u16 port_removable = le16_to_cpu(desc->u.ss.DeviceRemovable);
for (i = 1; i <= hdev->maxchild; i++) {
- connect_type = usb_get_hub_port_connect_type(hdev, i);
+ struct usb_port *port_dev = hub->ports[i - 1];
+ connect_type = port_dev->connect_type;
if (connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
u16 mask = 1 << i;
if (!(port_removable & mask)) {
- dev_dbg(&hdev->dev, "usb port%d's DeviceRemovable is changed to 1 according to platform information.\n",
- i);
+ dev_dbg(&port_dev->dev, "DeviceRemovable is changed to 1 according to platform information.\n");
port_removable |= mask;
}
}
projects / karo-tx-linux.git / blobdiff